ZH
RU
ES

Dongfang Electric fan

Dongfang Electric fan, Total:499 items.

In the international standard classification, Dongfang Electric fan involves: Wind turbine systems and other alternative sources of energy, Electrical engineering in general, Rotating machinery, Installations in buildings, Energy and heat transfer engineering in general, Electromagnetic compatibility (EMC), Ventilators. Fans. Air-conditioners, Mechanical structures for electronic equipment, Compressors and pneumatic machines, Protection against fire, Floor treatment appliances, Insulation, Electrical wires and cables, Electrical accessories, Television and radio broadcasting, Earth-moving machinery, Air quality, Components and accessories for telecommunications equipment, Internal combustion engines, Road vehicle systems, Aerospace electric equipment and systems, Optics and optical measurements, Standardization. General rules, Fluid power systems, Acoustics and acoustic measurements, Aerospace engines and propulsion systems, Power transmission and distribution networks, Electrical equipment for working in special conditions, Railway engineering in general, Refrigerating technology, Domestic, commercial and industrial heating appliances, Switchgear and controlgear, Road vehicles in general, Welding, brazing and soldering, Construction industry, Domestic electrical appliances in general, Railway rolling stock, Road engineering, Integrated circuits. Microelectronics, Nuclear energy engineering, Insulating materials, Explosion protection, Internal combustion engines for road vehicles, Industrial trucks, Electromechanical components for electronic and telecommunications equipment, Power stations in general, Industrial automation systems, Semiconductor devices, Metrology and measurement in general, Gas and steam turbines. Steam engines, Measurement of volume, mass, density, viscosity, Measurement of fluid flow, Microprocessor systems, Medical equipment, Tobacco, tobacco products and related equipment, Information technology (IT) in general, HEALTH CARE TECHNOLOGY, Audio, video and audiovisual engineering, Non-destructive testing.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Dongfang Electric fan

GB/T 20320-2023 Measurement and evaluation method of electrical characteristics of wind turbines in wind power generation system
GB/T 26921-2011 The guide of design optimization for motor systems (fans, pumps, air compressors)
GB/T 42592-2023 Ultrasonic detection method of wind turbine blades
GB/T 22516-2008 Acoustic noise measurement techniques of wind turbine generators systems
GB/T 22516-2015 Wind turbine generators systems.Acoustic noise measurement techniques
GB/T 13466-2006 The general principles of economic operation for AC driven fan (pump, air compressor) system
GB/T 19068.3-2003 Off-grid wind turbine generator system Part 3: Wind tunnel test methods
GB/T 19070-2003 Test method for electrical controller of wind turbine generator systems
GB/T 19071.2-2003 Asynchronous generator for wind turbine generator systems Part2: Test method
GB/T 20320-2006 Measurement and assessment of Power quality characteristics of Wind turbine generator system
GB/T 20320-2013 Measurement and assessment of power quality characteristics of wind turbines generator systems
GB/T 10760.2-2003 Generator of off-grid wind turbines generator system--Part 2: Testing method
GB/T 23479.2-2009 Wind turbine.Double-fed asynchronous generator.Part 2:Testing methods
GB/T 13466-1992 The general principles of economical operation for fans(pumps,compressors) system of alternating-current electric drive
GB/T 22696.5-2011 Electrical equipment safety.Risk assessment and risk reduction.Part 5:Method and example for risk assessment and reduction
GB/T 13466～13470-1992 Economic operation and calculation method of AC electric drive fan (pump, compressor) system {2006.12.1 was replaced (GB/T 13466)}
GB/T 19960.2-2005 Wind turbine generator system.Part 2: General test method
GB/T 13467-1992 The methods of electric power balance test and calculation in fan system
GB/T 13467-2013 Measurement and calculation methods of electric energy balance for fan system
GB/T 25389.2-2010 Wind turbine low-speed permanent magnet synchronous generator.Part 2:Testing methods
GB/T 19960.2-2005(英文版) Wind turbine generator systems— Part 2:General test method
GB/T 19068.2-2003 Off-grid wind turbine generator system Part 2: Test method
GB/T 31518.2-2015 Direct-drive permanent magnet type wind turbine generator system.Part 2: Test method
GB/T 25387.2-2010 Full-power converter of wind turbine generator system.Part 2:Test method
GB/T 25388.2-2010 Double-fed converter of wind turbine generator system.Part 2:Test method
GB/T 25386.2-2010 Wind turbine generator system variable speed constant frequency control system.Part 2:Test method
GB/T 15297-1994 Mechanical and climatic test methods for microcircuit modules
GB/T 42393-2023 Method for drawing regional wind damage distribution map of power grid under high altitude micro-topography and micro-meteorological conditions
GB/T 26674-2011 Road vehicle.Electrical performance of starter motors.Test methods
GB/T 28706-2012 Non-destructive testing.Test method for mechanical and electrical equipment with infrared thermography

British Standards Institution (BSI), Dongfang Electric fan

BS EN 61400-27-1:2015 Wind turbines. Electrical simulation models. Wind turbines
BS EN IEC 61400-21-1:2019+A11:2020 Wind energy generation systems - Measurement and assessment of electrical characteristics. Wind turbines
PD IEC TR 61400-21-3:2019 Wind energy generation systems. Measurement and assessment of electrical characteristics. Wind turbine harmonic model and its application
BS EN IEC 61400-50-1:2022 Wind energy generation systems - Wind measurement. Application of meteorological mast, nacelle and spinner mounted instruments
PD IEC TS 62257-7-2:2022 Renewable energy and hybrid systems for rural electrification. Generator set. Off-grid wind turbines
BS EN 50289-3-13:2003 Communication cables - Specifications for test methods - Mechanical test methods - Aeolian vibration
BS ISO 10263-4:2009 Earth-moving machinery - Operator enclosure environment - Heating, ventilating and air conditioning (HVAC) test method and performance
BS EN 60704-2-2:2010 Household and similar appliances - Test code for the determination of airborne acoustical noise - Particular requirements for fan heaters
BS ISO 12021:2010 Road vehicles. Sensitivity to lateral wind. Open-loop test method using wind generator input
BS EN ISO 14798:2013 Lifts (elevators), escalators and moving walks - Risk assessment and reduction methodology
BS EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
BS EN 60512-11-1:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Climatic tests - Test 11a - Climatic sequence
BS IEC 62047-35:2019 Semiconductor devices. Micro-electromechanical devices - Test method of electrical characteristics under bending deformation for flexible electromechanical devices
BS EN 16475-3:2016+A1:2018 Chimneys. Accessories. Draught regulators, standstill opening devices and combined secondary air devices. Requirements and test methods
BS EN 2591-406:1998 Elements of electrical and optical connection - Test methods - Mechanical endurance
BS ISO 14990-3:2016 Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems. Particular requirements for self-powered machines
BS EN 3475-512:2021 Aerospace series. Cables, electrical, aircraft use. Test methods - Flexure endurance
BS ISO 14990-2:2016 Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems. Particular requirements for externally-powered machines
BS EN 3475-603:2018 Aerospace series. Cables, electrical, aircraft use. Test methods - Resistance to wet arc tracking
BS ISO 8856:2014 Road vehicles. Electrical performance of starter motors. Test methods and general requirements
BS EN 3475-605:2018 Aerospace series. Cables, electrical, aircraft use. Test methods - Wet short circuit test
BS EN 3475-707:2017 Aerospace series. Cables, electrical, aircraft use. Test methods - Stabilization of assembly
BS EN 60749-27:2006 Semiconductor devices - Mechanical and climatic test methods - Electrostatic discharge (ESD) sensitivity testing - Machine model (MM)
BS ISO 14990-1:2016 Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems. General requirements
BS EN 60749-27:2006+A1:2012 Semiconductor devices. Mechanical and climatic test methods. Electrostatic discharge (ESD) sensitivity testing. Machine model (MM)
BS EN 3475-418:2019 Aerospace series. Cables, electrical, aircraft use. Test methods - Thermal endurance for conductors
PD IEC TR 60297-3-1:2023 Mechanical structures for electrical and electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series - Technological schemes and applications
BS EN IEC 62610-2:2018 Mechanical structures for electrical and electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series. Method for the determination of forced air cooling structure

Group Standards of the People's Republic of China, Dongfang Electric fan

T/CEEIA 488-2020 Photovoltaic electrical cabinets—Method for the determination of forced air cooling
T/ZZB 025-2015 Brushless DC fan motors for room air conditioners
T/CIET 13-2023 Brushless DC Motor for Air Purifier Fan
T/GDCKCJH 068-2022 Performance requirements and test methods for electrostatic eliminator of ion fan
T/JSREA 02-2022 Detailed Rules for Evaluation Method of Extended Service Life of Wind Turbines
T/SEAMTA 000005-2022 Environment-friendly gas insulated metal-enclosed switchgear for application in offshore wind turbine generator
T/QGCML 1062-2023 General test methods for mechanical and electrical equipment
T/CAQI 86-2019 Technical requirements and test method of air freshness for household and similar fresh-air air cleaner
T/CEEIA 586-2022 Wind energy generation systems - integrated inspection, test and evaluation method of operation and grid connection performance
T/CAAMTB 13-2020 Test methods for air compressors for fuel cell electric vehicles
T/CSAE 187-2021 Performance test methods for centrifugal air compressor of hydrogen fuel cell engine

Professional Standard - Railway, Dongfang Electric fan

TB/T 2540-1995 Test method for exhaust air volume of air compressors for internal combustion and electric locomotives
TB/T 2515-1995 Test method for electrical braking characteristics of electric locomotives
TB/T 2711-1996 Technical method of reciprocating piston air compressors for internal combustion and electric locomotives
TB/T 3523.3-2018 Test methods for AC drive electric locomotives Part 3: Temperature rise, electrical protection and auxiliary unit tests
TB/T 2713-1996 Method for determination of lubricating oil consumption of positive displacement air compressors for internal combustion and electric locomotives

国家市场监督管理总局、中国国家标准化管理委员会, Dongfang Electric fan

GB/T 36237-2018 Wind turbines—Electrical simulation models
GB/T 19068.3-2019 Small wind turbines—Part 3: Wind tunnel test methods
GB/T 19071.2-2018 Wind turbines—Asynchronous generatorg—Part 2: Testing methods
GB/T 25389.2-2018 Wind turbines—Permanent magnet synchronous generator—Part 2: Testing methods
GB/T 25386.2-2021 Wind turbines—Control system—Part 2：Test method
GB/T 40815.2-2021 Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 2: Method for the determination of forced air cooling
GB/T 25387.2-2021 Wind turbines generator system—Full-power converter—Part 2:Test method
GB/T 25388.2-2021 Wind turbines generator system—Double-fed converter—Part 2: Test method
GB/T 40013-2021 Service robot—Electrical safety requirements and test methods
GB/T 24113.2-2019 Electrical equipment of machines—Computer control systems for plastics machinery—Part 2：Test and evaluation method

PL-PKN, Dongfang Electric fan

PN S76122-1990 Electrical e?uipment of motor vehicles Fan motors
PN-EN IEC 61400-21-1-2019-08/A11-2021-01 E Wind energy generation systems -- Part 21-1: Measurement and assessment of electrical characteristics -- Wind turbines
PN R36103-1991 Tractors and self-propelled machines for agriculture.Performance of heating and ventilation systems in closed cabs.Test method
PN K11002-1990 Work protection electric engine Methódics investigation of noise
PN E08215-02-1987 Methods for measuring the performance of electric gas lighters for household and similar use
PN-EN 3475-512-2021-08 E Aerospace series -- Cables, electrical, aircraft use -- Test methods -- Part 512: Flexure endurance

International Electrotechnical Commission (IEC), Dongfang Electric fan

IEC 61400-27-1:2015 Wind turbines - Part 27-1: Electrical simulation models - Wind turbines
IEC 62610-2:2018 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling
IEC 61400-50-1:2022 Wind energy generation systems - Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments
IEC 61196-1-325:2008 Coaxial communication cables - Part 1-325: Mechanical test methods - Aeolian vibration
IEC TS 62257-7-2:2022 Recommendations for renewable energy and hybrid systems for rural electrification - Part 7-2: Generator set - Off-grid wind turbines
IEC 60601-2-12:1988 Medical electrical equipment; part 2: particular requirements for the safety of lung ventilators for medical use
IEC 60749-27:2003 Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge (ESD) sensitivity testing; Machine model (MM)

Association Francaise de Normalisation, Dongfang Electric fan

NF C57-700-27-1*NF EN 61400-27-1:2015 Wind turbines - Part 27-1 : electrical simulation models - Wind turbines
NF EN ISO 5801:2017 Ventilateurs - Essais aérauliques sur circuits normalisés
NF E51-763:2014 Ventilation for buildings - Mechanical supply and exhaust ventilation units for the ventilation of multi-family dwelling - test methods
NF S62-301-3*NF EN 12101-3:2015 Smoke and heat control systems - Part 3 : specification for powered smoke and heat control ventilators (Fans)
NF C57-700-21-1/A11*NF EN IEC 61400-21-1/A11:2020 Wind energy generation systems - Part 21-1 : measurement and assessment of electrical characteristics - Wind turbines
NF C57-700-21-1*NF EN IEC 61400-21-1:2019 Wind energy generation systems - Part 21-1 : measurement and assessment of electrical characteristics - Wind turbines
NF EN IEC 61400-21-1:2019 Systèmes de génération d'énergie éolienne - Partie 21-1 : mesurage et évaluation des caractéristiques électriques - Éoliennes
NF EN IEC 61400-21-1/A11:2020 Systèmes de génération d'énergie éolienne - Partie 21-1 : mesurage et évaluation des caractéristiques électriques - Éoliennes
NF E51-705:1989 Controlled mechanical ventilation components. Code for aerodynamic and acoustic testing of extracting motor-ventilator sets in caissons.
NF EN 16798-5-1:2017 Performance énergétique des bâtiments - Ventilation des bâtiments - Partie 5-1 : méthodes de calcul des besoins énergétiques des systèmes de ventilation et de conditionnement d'air (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Méthode 1 : di...
NF EN ISO 9972:2015 Performance thermique des bâtiments - Détermination de la perméabilité à l'air des bâtiments - Méthode de pressurisation par ventilateur
NF S62-303:2002 Smoke and heat control systems - Part 3 : specification for powered smoke and heat exhaust ventilators.
NF EN IEC 61400-50-1:2022 Systèmes de génération d'énergie éolienne - Partie 50-1 : mesurages du vent - Application d'instruments météorologiques montés sur mât, nacelle et nez de rotor
NF C18-550:2015 Opérations sur véhicules et engins à motorisation thermique, électrique ou hybride ayant une source d'énergie électrique embarquée - Prévention du risque électrique
NF C93-627-2*NF EN IEC 62610-2:2018 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2 : method for the determination of forced air cooling structure
NF EN IEC 62610-2:2018 Structures mécaniques pour équipements électriques et électroniques - Gestion thermique pour les armoires conformes aux séries IEC 60297 et IEC 60917 - Partie 2 : méthode pour la détermination du refroidissement par ventilation forcée
NF EN 50289-3-13:2003 Câbles de communication - Spécification des méthodes d'essais - Partie 3-13 : méthodes d'essais mécaniques - Vibration éolienne
NF C93-537-3-13*NF EN 50289-3-13:2003 Communication cables - Specifications for test methods - Part 3-13 : mechanical test methods - Aeolian vibration
NF EN 15684:2020 Quincaillerie pour le bâtiment - Cylindres mécatroniques - Exigences et méthodes d'essai
NF EN 15198:2007 Méthodes pour l'évaluation du risque d'inflammation des appareils et des composants non électriques destinés à être utilisés en atmosphères explosibles
NF EN 16475-3/IN1:2018 Conduits de fumée - Accessoires - Partie 3 : régulateurs de tirage, dispositifs d'ouverture pour période d'arrêt et dispositifs combinés d'air secondaire - Exigences et méthodes d'essai
NF EN 16475-3+A1:2018 Conduits de fumée - Accessoires - Partie 3 : régulateurs de tirage, dispositifs d'ouverture pour période d'arrêt et dispositifs combinés d'air secondaire - Exigences et méthodes d'essai
NF C96-009:1989 Electronic Components Semiconductor devices Mechanical and climatic test methods
NF ISO 14990-3:2022 Engins de terrassement - Sécurité électrique des machines utilisant des moteurs électriques et composants et systèmes connexes - Partie 3 : exigences spécifiques pour les machines auto-alimentées
NF L52-250-307*NF EN 3475-307:2015 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307 : corona extinction voltage
NF EN 60704-2-2:2014 Appareils électrodomestiques et analogues - Code d'essai pour la détermination du bruit aérien - Partie 2-2 : exigences particulières pour les appareils de chauffage soufflants
NF ISO 14990-1:2022 Engins de terrassement - Sécurité électrique des machines utilisant des moteurs électriques et composants et systèmes connexes - Partie 1 : exigences générales
NF EN 50467:2012 Applications ferroviaires - Matériel roulant - Connecteurs électriques, exigences et méthodes d'essai
NF L52-250-603*NF EN 3475-603:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603 : resistance to wet arc tracking

European Committee for Electrotechnical Standardization（CENELEC）, Dongfang Electric fan

EN 61400-27-1:2015 Wind turbines - Part 27-1: Electrical simulation models - Wind turbines
EN IEC 61400-21-1:2019 Wind energy generation systems - Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines
EN IEC 61400-21-1:2020 Wind energy generation systems - Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines (Incorporates Amendment A11: 2020)
EN IEC 62610-2:2018 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling
EN IEC 61400-50-1:2022 Wind energy generation systems - Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments
EN 50289-3-13:2003 Communication cables Specifications for test methods Part 3-13: Mechanical test methods Aeolian vibration

ES-UNE, Dongfang Electric fan

UNE-EN 61400-27-1:2015 Wind turbines - Part 27-1: Electrical simulation models - Wind turbines (Endorsed by AENOR in January of 2016.)
UNE-EN IEC 61400-21-1:2021 Wind energy generation systems - Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines
UNE-EN IEC 61400-21-1:2021/A11:2021 Wind energy generation systems - Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines
UNE-EN IEC 62610-2:2018 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling (Endorsed by Asociación Española de Normali...
UNE-EN IEC 61400-50-1:2023 Wind energy generation systems - Part 50-1: Wind Measurement - Application of Meteorological Mast, Nacelle and Spinner Mounted Instruments
UNE 10009/1C:1988 DIRECTION OF ROTATION MACHINES AND ELECTRICAL EQUIPMENT OF ROA VEHICLES.
UNE-EN 15684:2021 Building hardware - Mechatronic cylinders - Requirements and test methods
UNE-EN 3475-409:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 409: Air- excluded ageing (Endorsed by AENOR in April of 2002.)
UNE-EN 3475-703:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 703; Permanence of manufacturer´s marking (Endorsed by AENOR in April of 2002.)
UNE-EN 3475-305:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 305: Overload resistance (Endorsed by AENOR in April of 2002.)
UNE-EN 3475-803:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 803: Capacitance variation (Endorsed by AENOR in August of 2002.)
UNE-EN 3475-303:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 303: Insulation resistance (Endorsed by AENOR in April of 2002.)
UNE-EN 3475-304:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 304: Surface resistance (Endorsed by AENOR in April of 2002.)
UNE-EN 3475-307:2015 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage (Endorsed by AENOR in August of 2015.)
UNE-EN 3475-100:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General (Endorsed by AENOR in October of 2010.)
UNE-EN 3475-808:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 808: Cross-talk (Endorsed by AENOR in August of 2002.)
UNE-EN 3475-806:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 806: Attenuation (Endorsed by AENOR in August of 2002.)
UNE-EN 3475-601:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density (Endorsed by AENOR in November of 2007.)
UNE-EN 3475-602:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity (Endorsed by AENOR in November of 2007.)
UNE-EN 3475-202:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 202: Mass (Endorsed by AENOR in April of 2002.)
UNE-EN 3475-203:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions (Endorsed by AENOR in August of 2006.)
UNE-EN 3475-504:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 504: Torsion (Endorsed by AENOR in April of 2002.)
UNE-EN 3475-511:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 511: Cable-to -cable abrasion (Endorsed by AENOR in August of 2002.)
UNE-EN 3475-802:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance (Endorsed by AENOR in April of 2009.)
UNE-EN 3475-809:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance (Endorsed by AENOR in May of 2009.)
UNE-EN 3475-506:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity (Endorsed by AENOR in November of 2007.)

SE-SIS, Dongfang Electric fan

SIS SS 95 10 53-1984 Farm buildings - Climate in animal buildings -Fan ventilation - Test methods
SIS SS 2865-1986 Agricultural tractors and selfpropelled machines - Performance of heating and ventilation systems in closed cabs - Method of test

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Dongfang Electric fan

ASHRAE 4724-2004 Method of Thermal Metering on the Air Side for Fan Coil Units
ASHRAE 4731-2004 Overview of Exisiting Guidance and Ventilation Approaches for Control of Diesel Exhaust Inside Locomotive Facilities (RP-1191)
ASHRAE CH-03-2-4-2003 Displacement Ventilation - Smart Way to Deal with Increased Heat Gains in the Telecommunication Equipment Room
ASHRAE SF-98-25-1998 Symposium on Test and Analysis Methods for Resolving Fan/Motor Vibration Problems in Air-Conditioning Units
ASHRAE ST-16-026-2016 Using a Mass and Energy Balance Approach to Model the Performance of Parallel Fan-Powered Terminal Units with Fixed-Airflow Fans
ASHRAE 4117-1998 Methods for Resolving Fan/Motor Vibration Problems in Air-Conditioning Units: Part II - Experimental Procedures for Identifying Vibration Modes Excited by Fan Impeeler Unbalance (RP-685)
ASHRAE 4119-1998 Methods for Resolving Fan/Motor Vibration Problems in Air-Conditioning Units: Part IV - Experimental Procedures for Measuring Motor Torque Pulsations (RP-685)
ASHRAE 4116-1998 Methods for Resolving Fan/Motor Vibration Problems in Air-Conditioning Units: Part I - Analytical Models for Identifying Vibration Modes Excited by Fan Impeller Unbalance (RP-685)
ASHRAE ST-16-025-2016 Characterizing the Performance of Fixed-Airflow Series Fan-Powered Terminal Units Using a Mass and Energy Balance Approach

Professional Standard - Energy, Dongfang Electric fan

NB/T 31053-2021 Verification procedures for electrical simulation models of wind turbines
NB/T 31058-2014 Electrical energy matching and energy efficiency requirement of wind turbine generator system
NB/T 11073-2023 Safety Design Requirements for Electrical System of Plateau Wind Turbine Generating Set
NB/T 31050-2014 Evaluation method of electrical insulation systems for wind turbine generator

能源, Dongfang Electric fan

NB/T 31066-2015 Wind turbine electrical simulation model modeling guidelines

Canadian Standards Association (CSA), Dongfang Electric fan

CSA C22.2 NO.272-2014 Wind turbine electrical systems (First Edition)
CSA C61400-11-07-CAN/CSA-2007 Wind turbine generator systems ?Part 11: Acoustic noise measurement techniques First Edition
CAN/CSA-ISO 14798:2012 Lifts (elevators), escalators and moving walks — Risk assessment and reduction methodology (First Edition)

Professional Standard - Agriculture, Dongfang Electric fan

GB 1236-1985 Test method for aerodynamic performance of ventilator
JB/T 6939.2-1993 Test methods for controllers for small wind turbines

Professional Standard - Machinery, Dongfang Electric fan

JB/T 7323-1994 Test methods for wind turbines
JB/T 6229-2005 Methods and limits for checking the direct gas ventilation cooling system of turbogenerator rotor
JB/T 6229-2014 Methods and limits for checking the direct gas ventilation cooling system of non-salient pole synchronous generator rotor
JB/T 7143.2-1993 Test methods for inverters for wind turbines
JB/T 10137-1999 Testing methods for small wind energy conversion system
JB/T 11703-2013 Specification for room air conditioners burshless DC fan motors
JB/T 12658-2016 Internal combustion engines.Electronically-controlled silicon oil fan clutches.Test methods
JB/T 10425.2-2004 Yaw system of wind turbine generator systems Part 2:Test method
JB/T 10426.2-2004 Braking system of wind turbine generator systems Part 2:Test methods
JB/T 10401.2-2004 Braking system of off-grid wind turbine generator system Part 2:Test method
JB/T 10402.2-2004 Yaw system of off-grid wind turbine generator system Part 2:Test method
JB/T 10400.2-2004 Gearbox of off-grid wind turbine generator system Part 2:Test method
JB/T 6939.2-2004 Controller of off-grid wind turbine generator system Part 2:Test method
JB/T 6229-1992 Inspection method and limit value of direct hydrogen cooling air passage for turbogenerator rotor
JB/T 6227-2005 Checking methods and evaluation of sealing of hydrogen-cooled electrical machines
JB/T 1581-1996 Ultrasonic flaw detection of rotor and main shaft forgings of the turbine and turbogenerator

Beijing Provincial Standard of the People's Republic of China, Dongfang Electric fan

DB11/T 177-2003 Measurement and calculation methods of electricituy balance for ventilator‘s unit
DB11/T 176-2003 Measurement and calculation methods of electricituy balance for cubic type air compressor‘s unit

Japanese Industrial Standards Committee (JISC), Dongfang Electric fan

JIS B 9908-5:2019 Test method of air filter units for ventilation and electric air cleaners for ventilation -- Part 5: Test method of electric air cleaners for ventilation
JIS B 8340 ERRATUM 1:2002 Testing methods for turbo blowers and compressors (Erratum 1)
JIS C 62610-2:2021 Mechanical structures for electrical and electronic equipment -- Thermal management for cabinets -- Part 2: Method for the determination of forced air cooling
JIS B 8345:1995 Testing methods of turbo blowers and compressors for gases by loop arrangement
JIS B 9908:2001 Test method of air filter units for ventilation and electric air cleaners for ventilation
JIS B 9908:2011 Test method of air filter units for ventilation and electric air cleaners for ventilation
JIS B 9908-2:2019 Test method of air filter units for ventilation and electric air cleaners for ventilation -- Part 2: Measurement of fractional efficiency and air flow resistance
JIS B 9908-4:2019 Test method of air filter units for ventilation and electric air cleaners for ventilation -- Part 4: Conditioning method to determine the minimum fractional test efficiency
JIS B 9908-3:2019 Test method of air filter units for ventilation and electric air cleaners for ventilation -- Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
JIS C 2111:1995 Testing methods of electrical insulating papers, pressboard and presspaper
JIS T 1004:1983 Testing methods for mechanical safety of medical electrical equipment
JIS B 9908-1:2019 Test method of air filter units for ventilation and electric air cleaners for ventilation -- Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency

CZ-CSN, Dongfang Electric fan

CSN 35 0019 Cast.06-1979 Electrical rotating machines.Methods for determining quantity ofcooling gas
CSN 36 1079-1987 Electrical equipement of industrial fans. Requirements for safety and methods of testíng
CSN 36 1168-1984 Kitchen electricexhausters of vapour for household. Technical requirements for safety and methods of tests.
CSN 34 5613-1970 Test methods for mechanic tests of electrical apparatus
CSN 35 4055 Cast.3-1984 Electromechanical components forelectronic equipment. Contact resistance - Millivolt level method and specified test current method
CSN 36 1005 Cast.08-1984 Electrical appliances for household and similar use critical values, methods of measurement and evaluation of noise. Warm-air fams.
CSN 36 1005 Cast.10-1986 Electrical appliances for household and similar use. Critieal valuos, rnethods of measurement and evaluation of noise. Handheld hair driers
CSN 35 6853-1982 Vibration. Means for testing hammers powered pneumatically electrically or by combustion engine.
CSN 85 6007-1984 Dental pieces fot electrical drilling machine. Universal technical. require- ments and methods of testing
CSN 36 9061-1988 Data transmission equipment Signal converter Electrical and mechanical safety requirements and test methods

国家能源局, Dongfang Electric fan

NB/T 10987-2022 Specification for aerodynamic components of wind turbine blades
NB/T 10662-2021 Technical specifications for electromagnetic compatibility of electrical systems of wind turbines
NB/T 10653-2021 Test methods for structural adhesives for wind turbine blades
NB/T 31050-2021 Assessment methods for wind turbine insulation systems
NB/T 31102.2-2016 Sintered electromagnetic wire for wind turbine generators Part 2: Test methods
NB/T 10654-2021 Test methods for thermosetting epoxy resins for wind turbine blades
NB/T 31138-2018 Technical requirements for structural anti-corrosion of electrical control equipment for plateau wind turbines
NB/T 10220-2019 Design specifications for structural components of electrical control equipment for plateau wind turbines
NB/T 10992-2022 Method for determining the reduction coefficient for wind turbine power generation evaluation
NB/T 31142-2018 Specification for on-hook test methods for main shaft bearings of direct drive wind turbines
NB/T 10649-2021 Structural environmental durability test of plateau wind turbine electrical control equipment
NB/T 10663-2021 Design specifications for corrosion protection structures for electrical control equipment of offshore wind turbines
NB/T 31123-2017 Test methods for full power converters for plateau wind turbines
NB/T 31101.2-2016 Plate coolers for wind turbines Part 2: Test methods
NB/T 42114-2017 Test methods for small and medium power gas generator sets
NB/T 42109-2017 Calculation method for gas mixture characteristics of reciprocating internal combustion gas generator sets
NB/T 10301-2019 Thermal balance test method for reciprocating internal combustion gas generator sets

RU-GOST R, Dongfang Electric fan

GOST 10921-1990 Radial and axial fans. Aerodynamic testing methods
GOST 21991-1989 Electrotechnical equipment. Standard directions of movement for actuators which control the operation of electrical apparatus
GOST 24282-1997 Floor-mounted flexible electrified vehicles. Testing methods
GOST 24282-1986 Elexible-way electric powered vehicles. Testing methods
GOST R IEC 60335-2-80-2000 Safety of household and similar electrical appliances. Particular requirements for fans and test methods
GOST 27448-1987 Electromechanical components. Electrical overload test
GOST 22378-1977 Gas-turbine engines. Determining direction of rotor and shaft rotation
GOST R 53178-2008 Electric generating plants with gasiline, diesel and gas internal combustion engines. Test methods
GOST 22782.4-1978 Explosionproof electrical apparatus. Pressurized enclosure. Technical requirements and methods of testing
GOST R 55816-2013 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
GOST R 8.845-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Method of measuring volume density of electric charge of air and air ion concentration using aspiration capacitor
GOST R 50818-1995 Gas motors volumetric. General technical requirements and test methods
GOST 25861-1983 Computers and data processing systems. Electrical and mechanical safety requirements and test methods
GOST 31540-2012 Electric generating plants with gasiline, diesel and gas internal combustion engines. Test methods
GOST 33986-2016 Automotive vehicles. High-pressure cylinders for compressed natural gas used as motor fuel. Technical requirements and test methods

GOSTR, Dongfang Electric fan

GOST 10921-2017 Radial and axial fans. Methods of aerodynamic tests
GOST 34673.1-2020 Railway tractive rolling stock. Part 1. Inspection methods for parameters of electrical engineering

Korean Agency for Technology and Standards (KATS), Dongfang Electric fan

KS B 6327-1978(2016) TESTING METHODS OF TURBOBLOWERS AND COMPRESSORS FOR GASES BY LOOP ARRANGEMENT
KS R 5032-2015(2020) Road vehicles — Test method of windshield wiper motors
KS W 7214-1987(2018) Method of Soldering for Aircraft Electrical and Electronic Equipments
KS R 9177-2003(2008) Electro－Pneumatic point machines－Test methods
KS C ISO 669-2001(2006) Resistance welding－Resistance welding equipment－Mechanical and electrical requirements
KS B 8912-2016(2021) Domestic combined heat and power generator using internal gas combustion engines － Performance test methods
KS R 9158-2002 Test methods control equipment of electric rolling stock
KS B ISO 14798:2018 Lifts(elevators), escalators and moving walks — Risk assessment and reduction methodology
KS B 8913-2017 Combined heat and power unit using internal gas combustion engines for building — Performance test methods
KS I 4017-2014 Test methods for remanufactured BLDC motor of air purifier
KS C IEC 61377-2003(2013)
KS C 0911-2001 Testing methods for construction of electrical machinery and apparatus for use in explosive gas atomospheres(for coal mines)
KS C 0911-1981 Testing methods for construction of electrical machinery and apparatus for use in explosive gas atomospheres(for coal mines)
KS A 0080-2007 Electrostatic dust sampler and measuring method for mass of airborne dust by the electrostatic dust sampler
KS B 8911-2016 Reciprocating internal combustion gas engines for domestic cogeneration － Power and gas consumptions test methods

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Dongfang Electric fan

ASHRAE 51-2008 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51-2007 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating

Danish Standards Foundation, Dongfang Electric fan

DS/EN IEC 61400-21-1:2020 Wind energy generation systems – Part 21-1: Measurement and assessment of electrical characteristics – Wind turbines
DS/EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
DS/EN 3475-409:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409: Air-excluded ageing
DS/EN 3475-303:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance
DS/EN 3475-304:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance
DS/EN 3475-307:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
DS/EN 3475-504:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion
DS/EN 3475-602:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
DS/EN 3475-806:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation
DS/EN 3475-100:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
DS/EN 3475-202:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass
DS/EN 3475-203:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
DS/EN 3475-803:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803: Capacitance variation
DS/EN 3475-305:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance
DS/EN 3475-506:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity
DS/EN 3475-802:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance
DS/EN 3475-809:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance
DS/EN 3475-808:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808: Cross-talk
DS/EN 3475-512:2021 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 512: Flexure endurance
DS/EN 3475-404:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock
DS/EN 3475-407:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407 : Flammability
DS/EN 3475-408:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance
DS/EN 3475-410:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance
DS/EN 3475-412:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance
DS/EN 3475-509:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509: Solderability
DS/EN 3475-704:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility
DS/EN 3475-302:2006 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test
DS/EN 3475-401:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 401: Accelerated ageing
DS/EN 3475-406:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test
DS/EN 3475-411:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
DS/EN 3475-413:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test
DS/EN 3475-416:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability
DS/EN 3475-501:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through
DS/EN 3475-503:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion
DS/EN 3475-508:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
DS/EN 3475-601:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density
DS/EN 3475-805:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805: Characteristic impedance
DS/EN 3475-807:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807: Transfer impedance
DS/EN 3475-201:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination

Lithuanian Standards Office , Dongfang Electric fan

LST EN IEC 61400-21-1/A11:2021 Wind energy generation systems - Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines
LST EN 15198-2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
LST EN 3475-409-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409: Air-excluded ageing
LST EN 3475-304-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance
LST EN 3475-303-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance
LST EN 3475-307-2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
LST EN 3475-203-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
LST EN 3475-202-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass
LST EN 3475-504-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion
LST EN 3475-806-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation
LST EN 3475-602-2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
LST EN 3475-100-2011 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
LST EN 3475-305-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance
LST EN 3475-803-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803: Capacitance variation
LST EN 3475-506-2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity
LST EN 3475-802-2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance
LST EN 3475-809-2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance
LST EN 3475-808-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808: Cross-talk
LST EN 3475-410-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance
LST EN 3475-404-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock
LST EN 3475-412-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance
LST EN 3475-408-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance
LST EN 3475-407-2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407 : Flammability
LST EN 3475-509-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509: Solderability
LST EN 3475-302-2006 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test
LST EN 3475-704-2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility
LST EN 3475-401-2002 Aerospace series - Cables, electrical, aircraft use - Test Methods - Part 401: Accelerated ageing
LST EN 3475-201-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination
LST EN 3475-503-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion
LST EN 3475-406-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test
LST EN 3475-807-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807: Transfer impedance
LST EN 3475-805-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805: Characteristic impedance
LST EN 3475-413-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test
LST EN 3475-416-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability
LST EN 3475-411-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
LST EN 3475-501-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through

American Society for Testing and Materials (ASTM), Dongfang Electric fan

ASTM F2105-21 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
ASTM F2105-16 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
ASTM E1554-94 Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM E1554/E1554M-13 Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM E1554-03 Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM E1827-11(2017) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
ASTM F2105-11 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
ASTM F2105-06 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
ASTM F2105-01 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
ASTM F2105-04 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems

未注明发布机构, Dongfang Electric fan

NB/T 31053-2014 Wind turbine low voltage ride through modeling and verification method
DIN EN ISO 1680:2000 Method for measuring airborne noise emissions from rotating electrical machines
BS EN 3475-706:2005(2006) Cables, electrical, aircraft use — Test methods — Part 706 : Laser markability
SAE AS6171-2018 Test Methods Standard; General Requirements@ Suspect/Counterfeit@ Electrical@ Electronic@ and Electromechanical Parts
BS EN 3475-602:2007(2008) Aerospace series — Cables, electrical, aircraft use — Test methods — Part 602 : Toxicity
BS EN 3475-704:2007(2008) Aerospace series — Cables, electrical, aircraft use — Test methods — Part 704 : Flexibility

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Dongfang Electric fan

GB/T 10760.2-2017 Generator of small wind turbines—Part 2: Testing methods
GB/T 19068.2-2017 Small wind turbines—Part 2: Test method
GB/T 19070-2017 Stall regulation wind turbines—Control system—Test method
GB/T 35856-2018 Methods of insulation resistance test and resistant high voltage test for aircraft electrical equipment
GB/T 17737.325-2018 Coaxial communication cables—Part 1-325: Mechanical test methods—Aeolian vibration
GB/T 34593-2017 Test methods of hydrogen emission for fuel cell engine
GB/T 33347-2016 Reciprocating internal combustion gas generating set—Classification and constituent analysis of gas fuels

American Gear Manufacturers Association, Dongfang Electric fan

AGMA 10FTM03-2010 A Novel Approach to the Refurbishment of Wind Turbine Gears

Xinjiang Provincial Standard of the People's Republic of China, Dongfang Electric fan

DB65/T 4353-2021 Method for measuring the inclination of wind turbine tower
DB65/T 2219-2005 Measurement and assessment of power quality characteristics of grid connected stall regulation wind turbine generator system

American National Standards Institute （ANSI), Dongfang Electric fan

ANSI/ASTM F2105:2021 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
ANSI/AMCA 240-2015 Laboratory Methods of Testing Positive Pressure Ventilators for Aerodynamic Performance Rating
ANSI/ARESCA 61400-50-1:2023 Wind energy generation systems - Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments

Professional Standard - Aerospace, Dongfang Electric fan

QJ 2655.5-1994 Methods of measuring air flow for missile turbojet and turbofan engine parameters
QJ 2655.1-1994 Methods of measuring parameters of turbojet and turbofan engines for missiles Pressure
QJ 2655.2-1994 Methods of measuring parameters of missile turbojet and turbofan engines Temperature
QJ 2655.3-1994 Methods of measurement of missile turbojet and turbofan engine parameters thrust
QJ 2655.6-1994 Methods of measuring parameters of turbojet and turbofan engines for missiles
QJ 2655.4-1994 Methods of measuring fuel flow for missile turbojet and turbofan engine parameters

Military Standard of the People's Republic of China-General Armament Department, Dongfang Electric fan

GJB 9891-2020 Test method for inlet pressure distortion of aviation turbojet and turbofan engines
GJB 360.14-1987 Test methods for electronic and electrical components Random drop test
GJB 360.24-1987 Test methods for electronic and electrical components Random vibration test
GJB 811.3-1990 Test method for operating performance of brushes for aircraft motors - low air pressure test
GJB 811.3A-2020 Test methods for operating performance of brushes for aircraft motors Part 3: Low air pressure test

Underwriters Laboratories (UL), Dongfang Electric fan

UL SUBJECT 762-1989 Outline of Investigation for Power Ventilators for Restaurant Exhaust Appliances (Issue Number 1)

International Telecommunication Union (ITU), Dongfang Electric fan

ITU-R BT.1893-2015 Assessment methods of impairment caused to digital television reception by a wind turbine
ITU-R BT.1893-1-2015 Assessment methods of impairment caused to digital television reception by wind turbines

International Organization for Standardization (ISO), Dongfang Electric fan

ISO 10263-4:1994 Earth-moving machinery - Operator enclosure environment - Part 4: Operator enclosure ventilation, heating and/or air-conditioning test method
ISO/WD 27327-1 Fans — Air curtain units — Part 1: Laboratory methods of testing for aerodynamic performance rating
ISO/TS 14798:2000 Lifts (elevators), escalators and passenger conveyors - Risk analysis methodology
ISO 10263-4:2009 Earth-moving machinery - Operator enclosure environment - Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance
ISO 11862:1993 Earth-moving machinery; auxiliary starting aid electrical connector
ISO 8856:2014 Road vehicles - Electrical performance of starter motors - Test methods and general requirements
ISO 8856:1995 Road vehicles - Electrical performance of starter motors - Test methods and general requirements

Professional Standard - Commodity Inspection, Dongfang Electric fan

SN/T 3836-2014 Risk assessment guideline for the inspection of import used electrical and mechanical products
SN/T 3696-2013 Risk assessment guideline for inspection of imported mechanical & electrical products to be remanufactured

Defense Logistics Agency, Dongfang Electric fan

DLA QPL-83511-QPD-2013 Headset-Microphone and Headset-Electrical (Medium Noise Attenuation, Hearing Protective), General Specification for

Professional Standard - Aviation, Dongfang Electric fan

HB 7256-1995 Aircraft self-cooling and air-cooling electrical equipment ambient temperature and altitude range
HB 6637.1-1992 Aeronautical Electrical Diagram Compilation Method for Aircraft
HB 6637.2-1992 Aeronautical electrical drawing method for airborne equipment
HB 6637.1-2006 Drawing methods for electrical dragrams of aircraft part 1: Aircraft
HB 6637.2-2006 Drawing methods for electrical dragrams of aircraft Part 2: Airborne equipment

German Institute for Standardization, Dongfang Electric fan

DIN EN 61400-27-1:2016 Wind turbines - Part 27-1: Electrical simulation models - Wind turbines (IEC 61400-27-1:2015); German version EN 61400-27-1:2015
DIN 21626:2011-02 Fans with hybrid (electric/pneumatic) motor drive intended for use in potentially explosive atmospheres in coal mines
DIN EN 50289-3-13:2004-02 Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods - Aeolian vibration; German version EN 50289-3-13:2003 / Note: Applies in conjunction with DIN EN 50289-3-1 (2002-05).
DIN EN 50289-3-13:2004 Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods - Aeolian vibration; German version EN 50289-3-13:2003
DIN EN IEC 62610-2:2019-04 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling (IEC 62610-2:2018); German version EN IEC 626...
DIN EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres; English version of DIN EN 15198:2007-11
DIN EN 15684:2019 Building hardware - Mechatronic cylinders - Requirements and test methods; German and English version prEN 15684:2019
DIN 43102:1984 Electric traction; traction motors and auxiliary machines; definition of frontsides and direction of rotation
DIN EN 15198:2007-11 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres; German version EN 15198:2007
DIN EN 15684:2021-05 Building hardware - Mechatronic cylinders - Requirements and test methods; German version EN 15684:2020
DIN EN 60749-27:2013-04 Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM) (IEC 60749-27:2006 + A1:2012); German version EN 60749-27:2006 + A1:2012 / Note: DIN EN 60749-27 (2007-01) re...
DIN EN 3475-307:2015-08 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage; German and English version EN 3475-307:2015 / Note: Applies in conjunction with DIN EN 3475-100 (2011-01).
DIN EN 3475-100:2011-01 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General; German and English version EN 3475-100:2010
DIN EN 3475-806:2023-05 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation; English version prEN 3475-806:2023 / Note: Date of issue 2023-04-21*Intended as replacement for DIN EN 3475-806 (2002-12).
DIN EN 3475-203:2006-08 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions; German and English version EN 3475-203:2006 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
DIN EN 3475-602:2008-12 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity; German and English version EN 3475-602:2007
DIN EN 3475-506:2009-06 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity; German and English version EN 3475-506:2007 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
DIN EN 3475-802:2009-10 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2009 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
DIN EN 3475-809:2009-10 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance; German and English version EN 3475-809:2009 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
DIN EN 3475-511:2002-12 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion; German and English version EN 3475-511:2002 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
DIN EN 3475-601:2008-11 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3475-601:2007
DIN EN 3475-407:2010-09 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability; German and English version EN 3475-407:2009 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
DIN EN 3475-408:2023-06 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance; English version prEN 3475-408:2023 / Note: Date of issue 2023-05-12*Intended as replacement for DIN EN 3475-408 (2006-12).
DIN EN 3475-408:2006-12 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance; German and English version EN 3475-408:2005
DIN EN 3475-704:2009-05 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility; German and English version EN 3475-704:2007 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
DIN EN 3475-412:2002-12 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance; German and English version EN 3475-412:2002 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
DIN EN 3475-509:2002-12 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability; German and English version EN 3475-509:2002 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
DIN 73021:1953-06 Designation of the rotational direction, the cylinders and the ignition circuits of motorcar engines
DIN EN 3475-604:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation; German and English version EN 3475-604:2018
DIN EN 3475-603:2018 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking; German and English version EN 3475-603:2018
DIN EN 3475-604:2018-03 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation; German and English version EN 3475-604:2018 / Note: Applies in conjunction with DIN EN 3475-100 (2011-01).
DIN EN 3475-603:2018-03 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking; German and English version EN 3475-603:2018 / Note: Applies in conjunction with DIN EN 3475-100 (2011-01).
DIN EN 3475-512:2022 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance; German and English version EN 3475-512:2021

Society of Automotive Engineers (SAE), Dongfang Electric fan

SAE AIR1935-1985 Methods of Controlling Distortion of Inlet Airflow During Static Acoustical Tests of Turbofan Engines and Fan Rigs
SAE AIR1935-2007 Methods of Controlling Distortion of Inlet Airflow During Static Acoustical Tests of Turbofan Engines and Fan Rigs
SAE AIR1935A-2020 Methods of Controlling Distortion of Inlet Airflow During Static Acoustical Tests of Turbofan Engines and Fan Rigs
SAE ARP6178A-2023 Counterfeit Electrical, Electronic, and Electromechanical (EEE) Parts: Tools for Risk Assessment of Other than an Authorized Source (e.g., Independent Distributors)
SAE ARP937-2002 Jet Engine Electromagnetic Interference Test Requirements and Test Method

YU-JUS, Dongfang Electric fan

JUS N.S8.901-1991 Electrical apparatus for potentially explosive gas atmospheres. Specific requirements for ventilators in explosive gas atmospheres
JUS N.P0.203-1983 Electric eguipment of road vehicles. Rottition direktion of electric machines and devices.
JUS N.R4.430-1978 Ekctromechanical components for electronic equipment. Test methods. Test 10a: Electrical overload (svritches)
JUS N.S8.241-1987 Electrical apparatus for explosive gas atmospheres. Methods ofcontrol of the temperature ofcage rotor otor*

Taiwan Provincial Standard of the People's Republic of China, Dongfang Electric fan

CNS 3376.16-2002 Electrical apparatus for explosive gas atmospheres-Part 16: Artificial ventilation for the protection of analysers houses
CNS 3376-16-2002 Electrical apparatus for explosive gas atmospheres-Part 16: Artificial ventilation for the protection of analysers houses

KR-KS, Dongfang Electric fan

KS R ISO 12021-1-2008 Road vehicles－Sensitivity to lateral wind－Part 1：Open-loop test method using wind generator input
KS B ISO 14798-2018 Lifts(elevators), escalators and moving walks — Risk assessment and reduction methodology

NEMA - National Electrical Manufacturers Association, Dongfang Electric fan

NEMA MG 1 SUPP-2017 Motors and Generators - Section IV Part 34: Air-Over Motor Efficiency Test Method

AENOR, Dongfang Electric fan

UNE-EN 50289-3-13:2004 Communication cables - Specifications for test methods -- Part 3-13: Mechanical test methods - Aeolian vibration
UNE 115245:2005 Earth-moving machinery. Auxiliary starting aid electrical connector.
UNE-EN 15198:2008 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
UNE 10009:1988 DIRECTION OF ROTATION MACHINES AND ELECTRICAL EQUIPMENT OF ROAD VEHICLES.
UNE-EN ISO 14798:2013 Lifts (elevators), escalators and moving walks - Risk assessment and reduction methodology (ISO 14798:2009)
UNE-EN 61628-2:1999 CORRUGATED PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES. PART 2: METHODS OF TEST
UNE-EN 61237-2:1997 BROADCAST VIDEO TAPE RECORDERS. METHODS OF MEASUREMENT. PART 2: ELECTRICAL MEASUREMENTS OF ANALOGUE.

Standard Association of Australia （SAA）, Dongfang Electric fan

AS ISO 11862:2021 Earth-moving machinery — Auxiliary starting aid electrical connector
AS 1173.2:1986 Recommended methods of measurement on receivers for television broadcast transmissions - Electrical and acoustic measurements at audio-frequencies

交通运输部, Dongfang Electric fan

JT/T 1431.2-2022 Energy efficiency levels and assessment methods of electrical equipment for highway mechanical and electrical facilities Part 2: Highway tunnel ventilators

U.S. Military Regulations and Norms, Dongfang Electric fan

ARMY MIL-HDBK-705 C VALID NOTICE 1-1992 GENERATOR SETS, ELECTRIC, MEASUREMENTS AND INSTRUMENTATION METHODS
ARMY MIL-HDBK-705 C-1987 GENERATOR SETS, ELECTRIC, MEASUREMENTS AND INSTRUMENTATION METHODS

Professional Standard - Automobile, Dongfang Electric fan

QC/T 424-1999 Test method for electrical characteristics of automotive alternators

North Atlantic Treaty Organization Standards Agency, Dongfang Electric fan

STANAG 3516-2003 ELECTROMAGNETIC INTERFERENCE, TEST METHODS FOR AIRCRAFT ELECTRICAL AND ELECTRONIC EQUIPMENT

NATO - North Atlantic Treaty Organization, Dongfang Electric fan

STANAG 3516-2010 ELECTROMAGNETIC INTERFERENCE TEST METHODS FOR AIRCRAFT ELECTRICAL AND ELECTRONIC EQUIPMENT (ED 6)
STANAG 3516-2000 Electromagnetic Interference@ Test Methods for Aircraft Electrical and Electronic Equipment (ED 4; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 7
STANAG 3516-1993 Electromagnetic Interference and Test Methods for Aircraft Electrical and Electronic Equipment (ED 3 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32

RO-ASRO, Dongfang Electric fan

STAS 12743/9-1991 Electromechanical components for electronic equipment; BASIC TESTING PROCEDURES AND MEASURING METHODS Cable-clamping tests, explosion hazard tests, chemical resistance tests, fire hazard tests, r.f. rezistance tests,
STAS 9904/5-1975 ELECTRICAL ROTATIXG MACIIINES Test nuthods Momcntaryloart excess 〓 overspeed lest
STAS 12743/7-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Mechanical operating tests and sealing tests

HU-MSZT, Dongfang Electric fan

MSZ 20806/2-1983

ESDU - Engineering Sciences Data Unit, Dongfang Electric fan

ESDU 73019 C-1982 Approximate methods for estimation of cruise range and endurance: aeroplanes with turbo-jet and turbo-fan engines.
ESDU 70021-1970 Graphical method for the analysis of measured performance data using drag determination: aircraft with turbo-jet and turbo-fan engines.
ESDU 70020-1970 Non-dimensional approach to engine thrust and airframe drag for the analysis of measured performance data: aircraft with turbo-jet and turbo-fan engines.
ESDU 70022 A-1973 Non-dimensional graphical method for the analysis of measurements of steady level speed@ range and endurance: aircraft with turbo-jet and turbo-fan engines.

United States Navy, Dongfang Electric fan

NAVY MIL-H-22663 (3)-1965 HEATERS, SPACE, ELECTRIC: BLOWER, RADIANT AND TURRET (NAVAL SHIPBOARD)
NAVY MIL-H-22663-1960 HEATERS, SPACE, ELECTRIC: BLOWER, RADIANT AND TURRET (NAVAL SHIPBOARD)

European Committee for Standardization (CEN), Dongfang Electric fan

EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
CLC/TS 50467-2008 Railway applications — Rolling stock — Electrical connectors, requirements and test methods

工业和信息化部, Dongfang Electric fan

JB/T 6227-2021 Inspection method and evaluation of gas tightness of hydrogen-cooled motor

未注明发布机构, Dongfang Electric fan

NB/T 31053-2014 Wind turbine low voltage ride through modeling and verification method
DIN EN ISO 1680:2000 Method for measuring airborne noise emissions from rotating electrical machines
BS EN 3475-706:2005(2006) Cables, electrical, aircraft use — Test methods — Part 706 : Laser markability
SAE AS6171-2018 Test Methods Standard; General Requirements@ Suspect/Counterfeit@ Electrical@ Electronic@ and Electromechanical Parts
BS EN 3475-602:2007(2008) Aerospace series — Cables, electrical, aircraft use — Test methods — Part 602 : Toxicity
BS EN 3475-704:2007(2008) Aerospace series — Cables, electrical, aircraft use — Test methods — Part 704 : Flexibility

AT-OVE/ON, Dongfang Electric fan

OVE EN IEC 61400-50-1:2021 Wind energy generation systems - Part 50-1: Wind Measurement - Application of Meteorological Mast, Nacelle and Spinner Mounted Instruments (IEC 88/828/CDV) (english version)

BELST, Dongfang Electric fan

STB 2335-2013 Nuclear power plants. Safety. Method of threat analysis and estimation of safety violation risks of nuclear power plant computer systems

Professional Standard - Electron, Dongfang Electric fan

SJ/T 31394-1994 Requirements of electrical readiness and methods of inspection and assessment for diesel generator sets
SJ/T 10745-1996 Mechanical and climatic test methods for semiconductor integrated circuits
SJ/T 31290-1994 Requirements of readiness and methods of inspection and assessment for air capacitor tunnel drying machines
SJ 2845.1-1987 Electrical relays--Part 7: Generic specification: Test and measurement procedures for electromechanical all-or-nothing relays (Applicable for certification)

Canadian General Standards Board （CGSB), Dongfang Electric fan

CGSB 149.15-96-CAN/CGSB AMD 1-1999 Determination De L'Etancheite A L'Air Globale Des Enveloppes De Batiments Par La Methode De Depressurisation Par Ventilateur Au Moyen Des Systems De Traitement D'Air Des Batiments

AT-ON, Dongfang Electric fan

ONORM V 5411-1950

IN-BIS, Dongfang Electric fan

IS 6098-1971

API - American Petroleum Institute, Dongfang Electric fan

API STD 673 DATA SHEET- Centrifugal Fans for Petroleum@ Chemical and Gas for Industry Services - Mechanical Equipment Data Sheet (Second Edition; Includes Excel Spreadsheets)
API STD 673 DATA SHEET-2014 Centrifugal Fans for Petroleum@ Chemical and Gas for Industry Services - Mechanical Equipment Data Sheet (Third Edition; Includes Excel Spreadsheets)

Professional Standard - Traffic, Dongfang Electric fan

JT/T 93-1994 General electrical testing methods and technical requirements for port machinery

SAE - SAE International, Dongfang Electric fan

SAE AS6171-2016 Test Methods Standard; General Requirements@ Suspect/Counterfeit@ Electrical@ Electronic@ and Electromechanical Parts
SAE AIR1425-1978 Achieving Electromagnetic Compatibility of Gas Turbine Engine Accessories@ for Self-Propelled Vehicles@ Methods of

Professional Standard - Tobacco, Dongfang Electric fan

YC/T 391-2011 Tobacco machinery.Coding method for electro configuration and technology documents

Shanghai Provincial Standard of the People's Republic of China, Dongfang Electric fan

DB31/T 668.10-2012 Review and Calculation Method of Energy Conservation Energy Saving Technology Renovation and Contract Energy Management Project Part 10 Motor System (Fan)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Dongfang Electric fan

PREN 3475-409-1992 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 409 - Air-Excluded Ageing (Issue P 1)
PREN 3475-704-1996 Aerospace Series Cables Electrical Aircraft Use Test Methods Part 704 - Flexibility

CEN - European Committee for Standardization, Dongfang Electric fan

EN 3475-809:2009 Aerospace series - Cables@ electrical@ aircraft use - Test methods - Part 809: Resistance unbalance