ZH
RU
ES

reflective attachment

reflective attachment, Total:500 items.

In the international standard classification, reflective attachment involves: Electronic tubes, Optics and optical measurements, Cinematography, Fibre optic communications, Telecommunication systems, Burners. Boilers, Cycles, Medical equipment, Photography, Footwear, Graphical symbols, Protection against fire, Glass, Pulps, Paper and board, Lamps and related equipment, Equipment for the chemical industry, Industrial automation systems, Linear and angular measurements, Solar energy engineering, Road engineering, Dentistry, Non-destructive testing, Quantities and units, Installations in buildings, Textile machinery, Tyres, Mining equipment, Coals, Rails and railway components, Ceramics, Lifting equipment, Radiocommunications, Construction materials, Electronic display devices, Audio, video and audiovisual engineering, Transformers. Reactors, Acoustics and acoustic measurements, Radiation measurements, Road vehicle systems, Plastics, Radiation protection, Space systems and operations, Graphic technology, Nuclear energy engineering, Safety of machinery, Optoelectronics. Laser equipment, Insulating materials, Semiconductor devices, Electrical accessories, Products of the textile industry, Soil quality. Pedology, Rotating machinery, Heat recovery. Thermal insulation.

U.S. Military Regulations and Norms, reflective attachment

ARMY MIL-F-2980 E NOTICE 1-1995 FIRING ATTACHMENTS, BLANK AMMUNITION
ARMY MIL-F-2980 E (1)-1979 FIRING ATTACHMENTS, BLANK AMMUNITION
ARMY MIL-F-2980 E-1976 FIRING ATTACHMENTS, BLANK AMMUNITION
ARMY MIL-C-675 C REINST NOTICE 2-1996 COATING OF GLASS OPTICAL ELEMENTS (ANTI-REFLECTION) [Use In Lieu Of: ARMY MIL-C-00675 B]
ARMY MIL-C-675 C (3)-1986 COATING OF GLASS OPTICAL ELEMENTS (ANTI-REFLECTION)
ARMY MIL-C-675 C-1980 COATING OF GLASS OPTICAL ELEMENTS (ANTI-REFLECTION)
ARMY MIL-C-48477 B REINST NOTICE 4-2010 CIRUIT CARD ASSEMBLY: 11732377, MIRROR DRIVE ELECTRONICS
ARMY MIL-C-48477B NOTICE 2-1995 CIRCUIT CARD ASSEMBLY, 11732377 MIRROR DRIVE ELECTRONICS
ARMY MIL-C-48477B VALID NOTICE 1-1987 CIRCUIT CARD ASSEMBLY, 11732377 MIRROR DRIVE ELECTRONICS
ARMY MIL-C-48477B-1981 CIRCUIT CARD ASSEMBLY, 11732377 MIRROR DRIVE ELECTRONICS
ARMY MIL-DTL-41819/37 B VALID NOTICE 3-2013 Ribbon Attachment, Distinguished Marksman, Coast Guard
ARMY MIL-DTL-41819/38 B VALID NOTICE 3-2013 Ribbon Attachment, Distinguished Pistol Shot, Coast Guard
ARMY MIL-C-52291-1963 CRANE-SHOVELS, WHEEL MOUNTED, CONVERTIBLE TO SHOVEL AND BACKHOE OPERATIONS, WITH ATTACHMENTS
ARMY MIL-DTL-41819/36 B VALID NOTICE 3-2013 Ribbon Attachment, Excellence in Competition, Pistol Shot, Coast Guard
ARMY MIL-S-71146-1993 SIMULATOR, LAUNCHING, ANTI-TANK, GUIDED MISSILE AND ROCKET M22 PARTS FOR AND LOADING, ASSEMBLING AND PACKING

Professional Standard - Electron, reflective attachment

SJ 362-1973 Measurement conditions for reflex klystrons
SJ 347-1973 Generic specification for reflex klystrons
SJ 20448-1994 Specification for antireflection coatings for glass optical components

Professional Standard - Military and Civilian Products, reflective attachment

WJ 1854-1989 Specifications for anti-reflection coatings for optical parts

Professional Standard - Machinery, reflective attachment

JB/T 8226.1-1999 Coating for optical element.Anti-reflection coating
JB/T 8226.3-1999 Coating for optical element.Front surface reflecting coating
JB/T 8226.4-1999 Coating for optical element.Rear surface mirror coating
JB/T 5589-1991 Optical part coatings - High reflectance film
JB/T 6162-2013 General technical specifications of the reflective and transmitting projection screens
JB/T 8226.2-1999 Coating for optical element.Double layeranti-reflecting coating by hydrolltic process
JB/T 10061-1999 Commonly used specification for A-mode ultrasonic flaw detector using pulse echo technique

(U.S.) Ford Automotive Standards, reflective attachment

FORD ESB-M5P11-A-1991 METALLIZE PLASTIC PARTS, REFLECTORS
FORD ESB-M5P8-A-2000 METALLIZE, PLASTIC PARTS - REFLECTORS
FORD ESB-M5P8-A-2011 METALLIZE PLASTIC PARTS - REFLECTORS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M5P11-A-2008 METALLIZE PLASTIC PARTS, REFLECTORS ***TO BE USED WITH FORD WSS-M99P1111-A***

SE-SIS, reflective attachment

SIS SS-ISO 4037/ADD 2:1990 X and v reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy — Addendum 2: Photon reference radiations at energies between 4 MeV and 9 MeV
SIS SS IEC 637:1986 X-ray equipment - Marking of and accompanying documents for X-ray tu bes and X-ray tube assemblies for medical use
SIS SS-ISO 3744:1985 Acoustics — Determination of sound power teves of noise sources — Engineering methods for free-field conditions ?ver a reflecting plane
SIS SS-ISO 1680/1:1988 Acoustics — Measurement of airborne noise emittedby rotating electricalmachinery — Engineering method for free-field conditions ?ver a reflecting plane

American National Standards Institute （ANSI), reflective attachment

ANSI/TIA-455-107A-1999 Return Loss for Fiber Optic Components
ANSI/ADA 70-1999 Dental X-Ray Protective Aprons and Accessory Devices
ANSI/UL 1598B-2005 Supplemental Requirements for Luminaire Reflector Kits for Installation on Previously Installed Fluorescent Luminaires

Professional Standard - Railway, reflective attachment

TB/T 2929-1998 Technical conditions for railway retroreflective signs

AENOR, reflective attachment

UNE 201010:2015 Fire reaction test of low voltage electrical accessories. Classification according to the radiation test applicable to rigid materials
UNE-EN ISO 8362-3:2003 Injection containers and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001)
UNE-EN ISO 8362-4:2012 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011)
UNE-EN ISO 8362-1:2010 Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2009)
UNE-EN ISO 8362-6:2011 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010)
UNE-EN ISO 8362-7:2011 Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006)
UNE-EN ISO 22777:2005 Footwear - Test methods for accessories: touch and close fasteners - Peel strength before and after repeated closing (ISO 22777:2004)
UNE-ISO 5631-1:2015 Paper and board. Determination of colour by diffuse reflectance. Part 1: Indoor daylight conditions (C/2o)
UNE-ISO 2470-1:2012 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
UNE-EN ISO 13697:2007 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)

Professional Standard - Post and Telecommunication, reflective attachment

YD/T 797-1996 Technical conditions of optical time domain reflectoscopes
YD/T 598-1992 Technical conditions of mono-mode optical fiber time-domain reflectoscopes
YD/T 504-1991 Technical conditions for short-wave long optical time domain reflectoscopes
YD/T 2339.2-2011 Accessories for installation of radio-frequency coaxial cable.Part 2:grounding kits
YD/T 2339.1-2011 Accessories for installation of radio-frequency coaxial cable.Part 1:feeder clamps

Japanese Industrial Standards Committee (JISC), reflective attachment

JIS B 8213 AMD 1:2006 Boilers -- Reflex type water gauges (Amendment 1)
JIS E 3303:1977 Lenses, filters, reflectors and semi-sealed units for railway signals
JIS K 7654:1990 Photography -- Density measurements -- Part 4: Geometric conditions for reflection density
JIS R 1698:2015 Measurement of spectral reflectance of fine ceramics thin films under humid condition
JIS P 8150:2023 Paper and board -- Determination of colour by diffuse reflectance -- Indoor daylight conditions (C/2 degree)
JIS K 7642 AMD 1:2012 Imaging materials -- Processed photographic reflection prints -- Storage practices (Amendment 1)
JIS P 8148:2018 Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Indoor daylight conditions (ISO brightness)

International Organization for Standardization (ISO), reflective attachment

ISO 6742-2:2015/Amd 1:2018 Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices — Amendment 1
ISO 8362-3:2001 Injection containers and accessories - Part 3: Aluminium caps for injection vials
ISO 8362-2:2015/Amd 1:2022 Injection containers and accessories — Part 2: Closures for injection vials — Amendment 1
ISO 8362-2:1988 Injection containers for injectables and accessories; part 2: closures for injection vials
ISO 8362-2:2015 Injection containers and accessories - Part 2: Closures for injection vials
ISO 8362-2:2008 Injection containers and accessories - Part 2: Closures for injection vials
ISO 8362-1:2009/Amd 1:2015 Injection containers and accessories - Part 1: Injection vials made of glass tubing; Amendment 1
ISO 8362-4:2003 Injection containers and accessories - Part 4: Injection vials made of moulded glass
ISO 8362-1:2003 Injection containers and accessories - Part 1: Injection vials made of glass tubing
ISO 8362-1:2009 Injection containers and accessories - Part 1: Injection vials made of glass tubing
ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass
ISO 8362-1:2018 Injection containers and accessories - Part 1: Injection vials made of glass tubing
ISO 8362-4:1989 Injection containers for injectables and accessories; part 4: injection vials made of moulded glass
ISO 8362-6:2010 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials
ISO 8362-6:1992 Injection containers for injectables and accessories; part 6: caps made of aluminium-plastics combinations for injection vials
ISO 8362-5:2008 Injection containers and accessories - Part 5: Freeze drying closures for injection vials
ISO 8362-5:2016 Injection containers and accessories - Part 5: Freeze drying closures for injection vials
ISO 8362-1:1989 Injection containers for injectables and accessories; part 1: injection vials made of glass tubing
ISO 8362-3:1989 Injection containers for injectables and accessories; part 3: aluminium caps for injection vials
ISO 8362-5:1995 Injection containers for injectables and accessories - Part 5: Freeze drying closures for injection vials
ISO 31-10:1980/Amd 1:1985 Quantities and units of nuclear reactions and ionizing radiations — Amendment 1
ISO 20911:2020 Radio frequency identification (RFID) tyre tags — Tyre attachment classification
ISO 18599:2015 Textile machinery and accessories - Strips for water jet solidification
ISO 5-4:1995 Photography - Density measurements - Part 4: Geometric conditions for reflection density
ISO 8362-7:1995 Injection containers for injectables and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
ISO 8362-7:2006 Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
ISO 15368:2021 Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
ISO 22776:2004 Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing
ISO 22777:2004 Footwear - Test methods for accessories: Touch and close fasteners - Peel strength before and after repeated closing
ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
ISO 5-4:2009 Photography and graphic technology - Density measurements - Part 4: Geometric conditions for reflection density
ISO 5631-1:2022 Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2°)
ISO 5631-2:2022 Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10°)
ISO 5631-3:2022 Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2°)
ISO 18949:2019 Imaging materials — Reflection colour photographic prints — Method for testing stability under low humidity conditions
ISO 2470-1:2016 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
ISO 2470-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
ISO 26869:2012 Space systems - Small-auxiliary-spacecraft (SASC)-to-launch-vehicle interface control document
ISO 5631-2:2008 Paper and board - Determination of colour by diffuse reflectance - Part 2: Outdoor daylight conditions (D65/10 degrees)
ISO 5631-3:2008 Paper and board - Determination of colour by diffuse reflectance - Part 3: Indoor illumination conditions (D50/2 degrees)
ISO 5631-3:2015 Paper and board - Determination of colour by diffuse reflectance - Part 3: Indoor illumination conditions (D50/2 degrees)
ISO 5631-2:2015 Paper and board - Determination of colour by diffuse reflectance - Part 2: Outdoor daylight conditions (D65/10 degrees)
ISO 5631-2:2014 Paper and board - Determination of colour by diffuse reflectance - Part 2: Outdoor daylight conditions (D65/10 degrees)
ISO 5631-3:2014 Paper and board - Determination of colour by diffuse reflectance - Part 3: Indoor illumination conditions (D50/2 degrees)
ISO 14981:2000 Graphic technology - Process control - Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use
ISO 5631-1:2009 Paper and board - Determination of colour by diffuse reflectance - Part 1: Indoor daylight conditions (C/2°)
ISO 5631-1:2015 Paper and board - Determination of colour by diffuse reflectance - Part 1: Indoor daylight conditions (C/2 degrees)

British Standards Institution (BSI), reflective attachment

BS EN ISO 8362-1:2010 Injection containers and accessories. Injection vials made of glass tubing
BS EN ISO 8362-1:2009 Injection containers and accessories - Injection vials made of glass tubing
BS EN ISO 8362-2:2010 Injection containers and accessories. Part 2: Closures for injection vials
BS EN ISO 22777:2005 Footwear - Test method for accessories: touch and close fasteners - Peel strenght before and after repeated closingst method for accessories - Touch and close fasteners - Peel strength before and after repeated closing
BS EN ISO 8362-6:2011 Injection containers and accessories. Caps made of aluminium-plastics combinations for injection vials
BS EN ISO 8362-3:2003 Injection containers and accessories - Aluminium caps for injection vials
BS EN ISO 8362-5:2016 Injection containers and accessories. Freeze drying closures for injection vials
BS EN ISO 8362-4:2011 Injection containers and accessories. Injection vials made of moulded glass
BS ISO 18599:2015 Textile machinery and accessories. Strips for water jet solidification
BS ISO 20911:2020 Radio frequency identification (RFID) tyre tags. Tyre attachment classification
BS EN ISO 8362-7:2010 Injection containers and accessories. Injection caps made of aluminium-plastics combinations without overlapping plastics part
BS ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
BS ISO 5-4:2010 Photography and graphic technology. Density measurements. Geometric conditions for reflection density
BS ISO 5-4:2009 Photography and graphic technology - Density measurements - Geometric conditions for reflection density
20/30352222 DC BS ISO 15368. Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
BS EN ISO 22776:2004 Footwear. Test method for accessories. Touch and close fasteners. Shear strength before and after repeated closing
BS ISO 15368:2021 Tracked Changes. Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
19/30374377 DC BS ISO 20911. Radio frequency identification (RFID) tyre tags. Tyre attachment classification
BS ISO 5631-2:2014 Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10)
BS ISO 5631-3:2014 Paper and board. Determination of colour by diffuse reflectance. Indoor illumination conditions (D50/2)
BS ISO 5631-2:2015 Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10)
BS ISO 5631-3:2015 Paper and board. Determination of colour by diffuse reflectance. Indoor illumination conditions (D50/2)
BS ISO 5631-2:2009 Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10°)
BS ISO 5631-3:2010 Paper and board. Determination of colour by diffuse reflectance. Indoor illumination conditions (D50/2)
BS ISO 5631-3:2008 Paper and board - Determination of colour by diffuse reflectance - Indoor illumination conditions (D50/2 °)
BS EN 50216-4:2002 Power transformers and reactor fittings - Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)
BS ISO 5631-1:2010 Paper and board. Determination of colour by diffuse reflectance. Indoor daylight conditions (C/2°)
BS EN 62149-8:2014 Fibre optic active components and devices. Performance standards. Seeded reflective semiconductor optical amplifier devices
BS EN 62149-9:2014 Fibre optic active components and devices. Performance standards. Seeded reflective semiconductor optical amplifier transceivers
BS IEC 60747-5-15:2022 Semiconductor devices - Optoelectronic devices. Light emitting diodes. Test method of the flat-band voltage based on the electroreflectance spectroscopy
BS ISO 5631-1:2015 Paper and board. Determination of colour by diffuse reflectance. Indoor daylight conditions (C/2)
BS ISO 2470-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Indoor daylight conditions (ISO brightness)
BS ISO 5631-1:2009 Paper and board - Determination of colour by diffuse reflectance - Indoor daylight conditions (C/2 °)
BS ISO 5631-3:2022 Tracked Changes. Paper and board. Determination of colour by diffuse reflectance. Indoor illumination conditions (D50/2°)
BS ISO 5631-1:2022 Tracked Changes. Paper and board. Determination of colour by diffuse reflectance. Indoor daylight conditions (C/2°)
BS ISO 5631-2:2022 Tracked Changes. Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10°)
BS ISO 18949:2019 Imaging materials. Reflection colour photographic prints. Method for testing stability under low humidity conditions
BS ISO 26869:2012 Space systems. Small-auxiliary-spacecraft (SASC) to-launch-vehicle interface control document
BS ISO 18930:2011 Imaging materials. Pictorial colour reflection prints. Methods for evaluating image stability under outdoor conditions
BS EN 61496-3:2001 Safety of machinery - Electro-sensitive protective equipment - Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
BS ISO 2470-1:2016 Tracked Changes. Paper, board and pulps. Measurement of diffuse blue reflectance factor. Indoor daylight conditions (ISO brightness)
BS EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorized single-mode OTDR reflecting device for category C. Controlled environment
BS DD CLC/TS 61496-3:2008 Safety of machinery - Electro-sensitive protective equipment - Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
BS EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components. Performance standard. Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C. Controlled environments
BS EN ISO 22777:2004 Footwear. Test method for accessories: touch and close fasteners. Peel strenght before and after repeated closingst method for accessories. Touch and close fasteners. Peel strength before and after repeated closing
BS ISO 15790:2004 Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty
18/30338016 DC BS ISO 20890-6. In-service inspections for primary coolant circuit components of light water reactors. Part 6. Radiographic testing

Danish Standards Foundation, reflective attachment

DS/EN ISO 8362-2:2010 Injection containers and accessories - Part 2: Closures for injection vials
DS/EN ISO 8362-3:2003 Injection containers and accessories - Part 3: Aluminium caps for injection vials
DS/EN ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass
DS/ISO 8362-2:1993 Injection containers for injectables and accessories. Part 2: Closures for injection vials
DS/ISO 8362-3:1993 Injection containers for injectables and accessories. Part 3: Aluminium caps for injection vials
DS/EN 28362-2:1993 Injection containers for injectables and accessories. Part 2: Closures for injection vials
DS/EN 28362-3:1993 Injection containers for injectables and accessories. Part 3: Aluminium caps for injection vials
DS/EN ISO 8362-1:2010 Injection containers and accessories - Part 1: Injection vials made of glass tubing
DS/EN ISO 8362-6:2011 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials
DS/ISO 8362-1:1993 Injection containers for injectables and accessories. Part 1: Injection vials made of glass tubing
DS/EN 28362-1:1993 Injection containers for injectables and accessories. Part 1: Injection vials made of glass tubing
DS/ISO 8362-4:1993 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass
DS/EN 28362-4:1993 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass
DS/EN ISO 22776:2005 Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing
DS/EN ISO 22777:2005 Footwear - Test methods for accessories: touch and close fasteners - Peel strength before and after repeated closing
DS/EN ISO 8362-7:2011 Injection containers and accessories – Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
DS/ISO 18930:2012 Imaging materials - Pictorial colour reflection prints - Methods for evaluating image stability under outdoor conditions
DS/EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
DS/EN ISO 8980-4:2008 Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, reflective attachment

GB/T 12822-1991 Geometric conditions for photographic reflection density measurement
GB/T 12822.4-2008 Photography - Density measurement - Part 4: Geometric conditions for reflection density
GB/T 12823.4-2008 Photography.Density Measurement.Part 4:Geometric conditions for reflection density
GB/T 31389-2015 Technical requirements and evaluation methods of solar reflective materials for exterior walls and roofs
GB/T 7974-2013 Paper,board and pulps.Measurement of diffuse blue reflectance factor.D65 brightness(Diff/ Geometry, Outdoor daylight conditions)

PL-PKN, reflective attachment

PN S73100-1990 Retro-rellecting devices lor road vehicles Rcquirements and tests
PN C99464-04-1992 Photography Density measurements Geometrie conditions for reflection density

Association Francaise de Normalisation, reflective attachment

NF S93-110-2*NF EN ISO 8362-2:2015 Injection containers and accessories - Part 2 : closures for injection vials
NF S61-570:1987 FIRE FIGHTING AND RESCUE SERVICE VEHICLES. RETRO-REFLECTIVE AND FLUORESCENT ELEMENTS.
NF S93-112:1993 Injection containers for injectables and accessories. Part 3 : aluminium caps for injection vials.
NF Q03-039-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1 : indoor daylight conditions (ISO brightness).
NF S93-112-3*NF EN ISO 8362-3:2003 Injection containers and accessories - Part 3 : aluminium caps for injection vials
NF S93-110-1:2010 Injection containers and accessories - Part 1 : injection vials made of glass tubing.
NF S93-110-4*NF EN ISO 8362-4:2011 Injection containers and accessories - Part 4 : injection vials made of moulded glass.
NF S93-110:1993 Injection containers for injectables and accessories. Part 1 : injection vials made of glass tubing.
NF S93-111:1993 Injection containers for injectables and accessories. Part 2 : closures for injection vials.
NF S93-110-2:2010 Injection containers and accessories - Part 2 : closures for injection vials.
NF S93-113:1993 Injection containers for injectables and accessories. Part 4 : injection vials made of moulded glass.
NF S93-112-5:2008 Injection containers and accessories - Part 5 : freeze drying closures for injection vials.
NF S93-110-1*NF EN ISO 8362-1:2019 Injection containers and accessories - Part 1 : injection vials made of glass tubing
NF EN ISO 8362-5:2016 Récipients et accessoires pour produits injectables - Partie 5 : bouchons à lyophilisation pour flacons d'injection
NF S10-049*NF ISO 15368:2021 Optics and photonics - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
NF ISO 15368:2021 Optique et photonique - Mesurage du facteur de réflexion des surfaces planes et du facteur de transmission des éléments à plan parallèle
NF U12-011*NF ISO 20911:2020 Radio frequency identification (RFID) tyre tags - Tyre attachment classification
NF S93-115:1993 Injection contrainers for injectable and accessories. Part 6 : caps made of aluminium-plastics combinations for injection vials.
NF S93-112-5*NF EN ISO 8362-5:2016 Injection containers and accessories - Part 5 : freeze drying closures for injection vials
NF G62-606*NF EN ISO 22777:2005 Footwear - Test methods for accessories : touch and close fasteners - Peel strength before and after repeating closing
NF G62-605*NF EN ISO 22776:2005 Footwear - Test methods for accessories : touch and close fasteners - Shear strength before and after repeating closing
NF C93-884-8*NF EN 62149-8:2014 Fibre optic active components and devices - Performance standard - Part 8 : seeded reflective semiconductor optical amplifier devices
NF S93-110-6*NF EN ISO 8362-6:2011 Injection containers and accessories - Part 6 : caps made of aluminium-plastics combinations for injection vials.
NF EN ISO 8362-6:2011 Récipients et accessoires pour produits injectables - Partie 6 : capsules pour flacons d'injection fabriquées en un mélange aluminium-plastique
NF EN 62149-8:2014 Composants et dispositifs actifs à fibres optiques - Norme de performances - Partie 8 : dispositifs amplificateurs optiques à semiconducteur réfléchissants répartis
NF S10-049:2003 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements.
NF Q03-104-1*NF ISO 5631-1:2016 Paper and board - Determination of colour by diffuse reflectance - Part 1 : indoor daylight conditions (C/2o)
NF Q03-104-3*NF ISO 5631-3:2016 Paper and board - Determination of colour by diffuse reflectance - Part 3 : indoor illumination conditions (D50/2o)
NF S93-110-7*NF EN ISO 8362-7:2011 Injection containers and accessories - Part 7 : injection caps made of aluminium-plastics combinations without overlapping plastics part.
NF ISO 5631-3:2022 Papier et carton - Détermination de la couleur par réflectance diffuse - Partie 3 : Conditions d'éclairage intérieur (D50/2o)
NF ISO 5631-2:2022 Papier et carton - Détermination de la couleur par réflectance diffuse - Partie 2 : Conditions de lumière du jour extérieure (D65/10o)
NF C93-884-9*NF EN 62149-9:2014 Fibre optic active components and devices - Performance standards - Part 9 : seeded reflective semiconductor optical amplifier transceivers
NF EN 2591-605:2003 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 605 : organes optiques - Coefficient de réflexion
NF EN 62149-9:2014 Composants et dispositifs actifs à fibres optiques - Normes de performances - Partie 9 : émetteurs-récepteurs amplificateurs optiques à semiconducteur réfléchissants répartis
NF Q03-104-2:2009 Paper and board - Determination of colour by diffuse reflectance - Part 2 : outdoor daylight conditions (D65/10 o).
NF Q03-104-3:2009 Paper and board - Determination of colour by diffuse reflectance - Part 3 : indoor illumination conditions (D50/2 o).
NF Q03-104-1:2009 Paper and board - Determination of colour by diffuse reflectance - Part 1 : indoor daylight conditions (C/2 o).
NF Q03-104-2:2014 Paper and board - Determination of colour by diffuse reflectance - Part 2 : outdoor daylight conditions (D65/10o)
NF Q03-104-3:2014 Paper and board - Determination of colour by diffuse reflectance - Part 3 : indoor illumination conditions (D50/2o)
NF Q03-104-2*NF ISO 5631-2:2016 Paper and board - Determination of colour by diffuse reflectance - Part 2 : outdoor daylight conditions (D65/10o)
NF EN 61580-6:1998 Méthodes de mesure appliquées aux guides d'ondes - Partie 6 : pertes de réflexion dans un guide d'ondes et des assemblages de guides d'ondes.
NF ISO 5631-1:2022 Papier et carton - Détermination de la couleur par réflectance diffuse - Partie 1 : Conditions d'éclairage intérieur de jour (C/2o)
NF EN ISO 13697:2006 Optique et photonique - Lasers et équipements associés aux lasers - Méthodes d'essai du facteur de réflexion spéculaire et du facteur de transmission des composants optiques laser
NF Q03-039-1*NF ISO 2470-1:2016 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1 : indoor daylight conditions (ISO brightness)
NF ISO 2470-2:2008 Papier, carton et pâtes - Mesurage du facteur de réflectance diffuse dans le bleu - Partie 2 : conditions de lumière du jour extérieure (degré de blancheur D65)
NF S10-114*NF EN ISO 13697:2006 Optics and phonotics - Lasers and laser-related equipment - Test methods for specular reflectance and transmittance of optical laser components.
NF Q03-039-2*NF ISO 2470-2:2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 2 : outdoor daylight conditions (D65 brightness).
NF ISO 2470-1:2016 Papier, carton et pâtes - Mesurage du facteur de réflectance diffuse dans le bleu - Partie 1 : conditions d'éclairage intérieur de jour (degré de blancheur ISO)

Korean Agency for Technology and Standards (KATS), reflective attachment

KS P ISO 8362-2:2020 Injection containers and accessories —Part 2: Closures for injection vials
KS P ISO 8362-3:2020 Injection containers and accessories —Part 3: Aluminium caps for injection vials
KS P ISO 8362-2:2009 Injection containers and accessories-Part 2:Closures for injection vials
KS M ISO 2470-2:2019 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions(D65 brightness)
KS P ISO 8362-4:2009 Injection containers and accessories-Part 4:Injection vials made of moulded glass
KS P ISO 8362-1:2010 Injection containers and accessories－Part 1：Injection vials made of glass tubing
KS P ISO 8362-1:2021 Injection containers and accessories —Part 1: Injection vials made of glass tubing
KS P ISO 8362-4:2014 Injection containers and accessories — Part 4: Injection vials made of moulded glass
KS P ISO 8362-1:2017 Injection containers and accessories－Part 1：Injection vials made of glass tubing
KS C 8009-1975(2019) Measuring procedures for light intensity distribution of reflectors for lighting fittings
KS P ISO 8362-3:2009 Injection containers and accessories－Part 3：Aluminium caps for injection vials
KS P ISO 8362-5:2009 Injection containers and accessories-Part 5:Freeze drying closures for injection vials
KS P ISO 8362-4:2020 Injection containers and accessories — Part 4: Injection vials made of moulded glass
KS A ISO 5-4:2011 Photography and graphic technology－Density measurements－Part 4：Geometric conditions for reflection density
KS P ISO 8362-5:2020 Injection containers and accessories — Part 5: Freeze drying closures for injection vials
KS B ISO 15368-2006(2016) Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS M ISO 22776-2005(2020) Footwear－Test methods for accessories：Touch and close fasteners－Shear strength before and after repeated closing
KS M ISO 22777-2005(2020) Footwear－Test methods for accessories：Touch and close fasteners－Peel strength before and after repeated closing
KS M ISO 22776:2005 Footwear－Test methods for accessories：Touch and close fasteners－Shear strength before and after repeated closing
KS M ISO 22777:2005 Footwear－Test methods for accessories：Touch and close fasteners－Peel strength before and after repeated closing
KS B ISO 15368:2006 Optics and optical instruments-Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS B ISO 15368-2006(2021) Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS C IEC 61747-6-2-2006(2016) Liquid crystal display devices－Part 6－2：Measuring methods for liquid crystal modules－Reflective type
KS C IEC 61747-6-2-2006(2021) Liquid crystal display devices－Part 6－2：Measuring methods for liquid crystal modules－Reflective type
KS P ISO 8362-6:2009 Injection containers for injectables and accessories-Part 6:Caps made of aluminium-plastics combinations for injection vials
KS P ISO 8362-6:2014 Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials
KS A ISO 5-4-2011(2021) Photography and graphic technology－Density measurements－Part 4：Geometric conditions for reflection density
KS A ISO 5-4-2011(2016) Photography and graphic technology－Density measurements－Part 4：Geometric conditions for reflection density
KS P ISO 8362-7:2009 Injection containers and accessories－Part 7：Injection caps made of aluminium-plastics combinations without overlapping plastics part
KS M ISO 5631-2:2011 Paper and board-Determination of colour by diffuse reflectance-Part 2:Outdoor daylight conditions (D65/10°)
KS M ISO 5631-3:2012 Paper and board-Determination of colour by diffuse reflectance-Part 3:Indoor illumination conditions(D50/2°)
KS M ISO 5631-3:2022 Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions(D50/2°)
KS M ISO 5631-2:2022 Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions(D65/10°)
KS M ISO 5631-2:2016 Paper and board－Determination of colour by diffuse reflectance－Part 2：Outdoor daylight conditions (D65/10°)
KS M ISO 5631-1:2016 Paper and board－Determination of colour by diffuse reflectance－Part 1：Indoor daylight condition (C/2°)
KS M ISO 5631-3:2016 Paper and board－Determination of colour by diffuse reflectance－Part 3：Indoor illumination conditions(D50/2°)
KS M ISO 5631-1:2022 Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions(C/2°)
KS M ISO 2470-1:2011 Paper, board and pulps-Measurement of diffuse blue reflectance factor-Part 1:Indoor daylight conditions(ISO brightness)
KS M ISO 2470-1:2016 Paper, board and pulps－Measurement of diffuse blue reflectance factor－Part 1：Indoor daylight conditions(ISO brightness)
KS M ISO 5631-1:2011 Paper and board-Determination of colour by diffuse reflectance-Part 1:Indoor daylight condition (C/2°)
KS C IEC 61747-6-2:2006 Liquid crystal display devices-Part 6-2:Measuring methods for liquid crystal modules-Reflective type
KS M ISO 2470-1:2021 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions(ISO brightness)
KS X ISO 15790-2005(2020) Graphic technology and photography－Certified reference materials for reflection and transmission metrology－Documentation and procedures for use, including determination of combined standard uncertaint
KS P ISO 8362-6:2020 Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials

KR-KS, reflective attachment

KS P ISO 8362-2-2020 Injection containers and accessories —Part 2: Closures for injection vials
KS P ISO 8362-3-2020 Injection containers and accessories —Part 3: Aluminium caps for injection vials
KS M ISO 2470-2-2019 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions(D65 brightness)
KS P ISO 8362-1-2021 Injection containers and accessories —Part 1: Injection vials made of glass tubing
KS P ISO 8362-1-2017 Injection containers and accessories－Part 1：Injection vials made of glass tubing
KS P ISO 8362-4-2020 Injection containers and accessories — Part 4: Injection vials made of moulded glass
KS P ISO 8362-5-2020 Injection containers and accessories — Part 5: Freeze drying closures for injection vials
KS M ISO 5631-2-2016 Paper and board－Determination of colour by diffuse reflectance－Part 2：Outdoor daylight conditions (D65/10°)
KS M ISO 5631-3-2016 Paper and board－Determination of colour by diffuse reflectance－Part 3：Indoor illumination conditions(D50/2°)
KS M ISO 5631-1-2016 Paper and board－Determination of colour by diffuse reflectance－Part 1：Indoor daylight condition (C/2°)
KS M ISO 5631-1-2022 Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions(C/2°)
KS M ISO 5631-2-2022 Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions(D65/10°)
KS M ISO 5631-3-2022 Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions(D50/2°)
KS M ISO 2470-1-2021 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions(ISO brightness)
KS M ISO 2470-1-2016 Paper, board and pulps－Measurement of diffuse blue reflectance factor－Part 1：Indoor daylight conditions(ISO brightness)
KS P ISO 8362-6-2020 Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials

BE-NBN, reflective attachment

NBN 400-2-1969
NBN 491-1958
NBN 400-6-1969
NBN 400-5-1969
NBN 400-4-1969
NBN-EN 28362-1-1993 Injection containers for injectables and accessories. Part 1: Injection vials made of glass tubing (ISO 8362-1: 1989)
NBN-EN 28362-2-1993 Injection containers for injectables and accessories. Part 2: Closures for injection vials (ISO 8362-2: 1988)
NBN 400-1-1969
NBN-EN 28362-4-1993 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass (ISO 8362-4: 1989)
NBN 400-3-1969
NBN-EN 28362-3-1993 Injection containers for injectables and accessories. Part 3: Aluminium caps for injection vials (ISO 8362-3: 1989)

American Society of Mechanical Engineers (ASME), reflective attachment

ASME SEC VIII D1 NMA APP G-2001 Appendix G Suggested Good Practice Regarding Piping Reactions and Design of Supports and Attachments

Taiwan Provincial Standard of the People's Republic of China, reflective attachment

CNS 7020-1981 Graphical Symbols for Detectors and Measuring Instrument Accessories for Ionizing Radiation

Professional Standard - Building Materials, reflective attachment

JC/T 2170-2013 Anti-reflective coated glass for photovoltaic modules

German Institute for Standardization, reflective attachment

DIN EN ISO 8362-3:2003 Injection containers for injectables and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001); German version EN ISO 8362-3:2003; German and English texts
DIN EN ISO 8362-3:2003-10 Injection containers for injectables and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001); German version EN ISO 8362-3:2003; German and English texts
DIN EN ISO 8362-5:2016-07 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016); German version EN ISO 8362-5:2016
DIN EN ISO 8362-6:2011-07 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010); German version EN ISO 8362-6:2011
DIN EN ISO 8362-4:2011-12 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011); German version EN ISO 8362-4:2011
DIN EN ISO 22777:2005 Footwear - Test methods for accessories: Touch and close fasteners - Peel strength before and after repeated closing (ISO 22777:2004); German version EN ISO 22777:2004
DIN EN ISO 22776:2005 Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing (ISO 22776:2004); German version EN ISO 22776:2004
DIN ISO 18599:2016 Textile machinery and accessories - Strips for water jet solidification (ISO 18599:2015)
DIN ISO 8362-5:2011 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2008)
DIN 6857-2:2021 Radiation protection accessories for medical use of X-radiation - Part 2: Quality control of protective clothes being in use
DIN 6857-2:2021-04 Radiation protection accessories for medical use of X-radiation - Part 2: Quality control of protective clothes being in use
DIN ISO 8362-7:2007 Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006)；English version of DIN ISO 8362-7:2007-06
DIN 4512-10:1993 Photographic sensitometry, determination of optical density; geometric conditions for reflection density
DIN 64639:1998 Textile machinery and accessories - Heald frames for air-jet weaving machines - Connecting dimensions
DIN EN ISO 8362-7:2011-03 Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006); German version EN ISO 8362-7:2010
DIN EN ISO 8362-2:2010 Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2008); German version EN ISO 8362-2:2010
DIN EN ISO 8362-2:2016 Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015); German version EN ISO 8362-2:2015
DIN EN ISO 8362-6:2011 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010); German version EN ISO 8362-6:2011
DIN 6857-1:2009 Radiation protection accessories for medical use of X-radiation - Part 1: Determination of shielding properties of unleaded or lead reduced protective clothing
DIN 25435-7:2014 In-service inspections for primary coolant circuit components of light water reactors - Part 7: Radiographic testing
DIN 25435-7:2003 In-service inspections for primary coolant circuit components of light water reactors - Part 7: Radiographic testing
DIN 25435-7:2021-06 In-service inspections for primary coolant circuit components of light water reactors - Part 7: Radiographic testing
DIN EN ISO 8362-1:2010 Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2009); German and English version EN ISO 8362-1:2009
DIN EN ISO 13697:2006-08 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006); German version EN ISO 13697:2006
DIN EN ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011); German version EN ISO 8362-4:2011
DIN EN ISO 8362-1:2016 Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2009 + Amd 1:2015); German version EN ISO 8362-1:2009 + A1:2015
DIN EN ISO 8362-5:2016 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016); German version EN ISO 8362-5:2016
DIN EN ISO 8362-7:2011 Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006); German version EN ISO 8362-7:2010
DIN 25712:2015 Criticality safety taking into account the burnup of fuel for transport and storage of irradiated light water reactor fuel assemblies in casks
DIN 25712:2007 Criticality safety taking into account the burnup of fuel for transport and storage of irradiated light water reactor fuel assemblies in casks
DIN EN ISO 8362-1:2017 Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO/DIS 8362-1:2017); German and English version prEN ISO 8362-1:2017

CZ-CSN, reflective attachment

CSN 66 6612-1983 Conditions for determination of reflection density of black-and-white photographic materials
CSN 66 6618-1986 Pliotography. Conditions for detormination of reflection density of color photographic materials

Professional Standard - Light Industry, reflective attachment

QB/T 1552-1992 Technical specification for paint coating of reflector of lighting fixtures

Professional Standard - Chemical Industry, reflective attachment

HG/T 2483-2006 Technical conditions of the prism-base reflective-transmitted double-color liquid level meters
HG/T 2483-1993 Technical conditions of prism transflective two-color liquid level gauge

IN-BIS, reflective attachment

IS 8248-1976

European Committee for Standardization (CEN), reflective attachment

EN ISO 8362-2:2010 Injection containers and accessories - Part 2: Closures for injection vials
EN ISO 8362-2:2015/A1:2022 Injection containers and accessories - Part 2: Closures for injection vials - Amendment 1 (ISO 8362-2:2015/Amd 1:2022)
EN ISO 8362-6:2011 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010)
EN ISO 8362-5:2016 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016)
prEN 28362-3-1992 Injection containers for injectables and accesssories; part 3: aluminium caps for injection vials (ISO 8362-3:1989)
EN 28362-2:1993 Injection Containers for Injectables and Accessories - Part 2: Closures for Injection Vials (ISO 8362-2 : 1988)
prEN 28362-1-1992 Injection containers for injectables and accesssories; part 1: injection vials made of glass tubing (ISO 8362-1:1989)
prEN 28362-2-1992 Injection containers for injectables and accesssories; part 2: closures for injection vials (ISO 8362-2:1988)
EN ISO 8362-7:2010 Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006)
prEN 28362-4-1992 Injection containers for injectables and accesssories; part 4: injection vials made of moulded glass (ISO 8362-4:1989)
EN ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass
EN ISO 3543:2000/AC:2006 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000/Cor.1:2003)
HD 462 S1-1987 Process stream radiation monitoring equipment in light water nuclear reactors for normal operating and incident conditions
EN 28362-3:1993 Injection Containers for Injectables and Accessories - Part 3: Aluminium Caps for Injection Vials (ISO 8362-3 : 1989)
EN 28362-1:1993 Injection Containers for Injectables and Accessories - Part 1. Injectable Vials Made of Glass Tubing (ISO 8362-1 : 1989)
EN ISO 22777:2004 Footwear - Test methods for accessories: touch and close fasteners - Peel strength before and after repeated closing
EN ISO 8362-3:2003 Injection containers and accessories Part 3: Aluminium caps for injection vials
EN 28362-4:1993 Injection Containers for Injectables and Accessories - Part 4: Injection Vials Made of Moulded Glass (ISO 8362-4 : 1989)
EN 16012:2012+A1:2015 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance
EN ISO 8362-1:2004 Injection containers and accessories - Part 1: Injection vials made of glass tubing ISO 8362-1:2003; Supersedes EN 28362-1:1993
EN 1463-1:1997/prA1:2000 Amd PRA1 Road Markings Materials - Retroreflecting Road Studs - Part 1: Initial Performance Requirements

Military Standard of the People's Republic of China-General Armament Department, reflective attachment

GJB 8149-2013 Measurement for super-high reflectivity of optical element.Cavity ring-down method
GJB 2444-1995 General specification for dual-core symmetrical series radio frequency coaxial connectors and accessories

Group Standards of the People's Republic of China, reflective attachment

T/ZJSEE 0011-2023 Failure Detection for Anti-reflection Coatings of Photovoltaic Panels in Photovoltaic Power Station
T/CPIA 0028.1-2021 Glass for photovoltaic modules Part 1: Glass with anti-reflection coating on the front sheet
T/CPIA 0028.2-2021 Glass for Photovoltaic Modules Part 2: Double-glass Module Backsheet Enhanced Reflection Coated Glass
T/CPIA 0036.1-2022 Retroreflective optical films for photovoltaic modules Part 1: Films for tinned ribbon surfaces
T/SDAQI 015-2021 Textiles—Determination of heavy metal migration in accessories(Inductively coupled plasma optic emission spectrometry)

American Society for Testing and Materials (ASTM), reflective attachment

ASTM E179-17 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
ASTM E179-17(2022) Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
ASTM E179-96 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
ASTM E179-96(2003) Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
ASTM E179-12 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
ASTM E811-95(2001) Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
ASTM E811-09 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
ASTM E2177-19 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
ASTM E2177-18 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
ASTM E2177-01(2009) Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Wetness
ASTM F914/F914M-18 Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
ASTM F914/F914M-20 Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
ASTM F914/F914M-15 Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
ASTM E811-09(2015) Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
ASTM F2904-11(2019) Standard Specification for Warnings on Paintball Marker Accessories Used In the Sport of Paintball
ASTM E2832-12(2017) Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
ASTM E2176-08 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (R_L-Rain)
ASTM E2177-11 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Wetness
ASTM E2832-12 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
ASTM D6836-02(2008)e2 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
ASTM E2177-01 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Wetness
ASTM E2176-01 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Continuous Wetting
ASTM C667-17 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air

Lithuanian Standards Office , reflective attachment

LST EN ISO 8362-2:2010 Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2008)
LST EN ISO 8362-3:2003 Injection containers and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001)
LST EN ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011)
LST EN ISO 8362-6:2011 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010)
LST EN ISO 8362-1:2010 Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2009)
LST EN ISO 8362-7:2011 Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006)
LST EN ISO 22777:2005 Footwear - Test methods for accessories: touch and close fasteners - Peel strength before and after repeated closing (ISO 22777:2004)
LST HD 462 S1-2002 Process stream radiation monitoring equipment in light water nuclear reactors for normal operating and incident conditions (IEC 60768:1983)
LST EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)

Professional Standard - Traffic, reflective attachment

JT/T 692-2007 Test method for colorimetric charactedstics of retrorenectors under nighttime conditions

SAE - SAE International, reflective attachment

SAE AS95234/8-2014 CONNECTOR@ RECEPTACLE@ REVERSE BAYONET COUPLING@ JAM NUT@ WITH ACCESSORY THREADS
SAE AS95234/3-2014 CONNECTOR@ RECEPTACLE@ REVERSE BAYONET COUPLING@ SQUARE FLANGE@ BOX MOUNT@ REAR@ NO ACCESSORY THREAD
SAE AS95234/2-2014 CONNECTOR@ RECEPTACLE@ SQUARE FLANGE@ REVERSE BAYONET COUPLING@ BOX MOUNT@ FRONT@ NO ACCESSORY THREAD
SAE AS95234/5-2014 CONNECTOR@ RECEPTACLE@ REVERSE BAYONET COUPLING@ SQUARE FLANGE@ PANEL MOUNT@ REAR@ WITH ACCESSORY THREAD
SAE J576-2017 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES

Society of Automotive Engineers (SAE), reflective attachment

SAE AS95234/8-2019 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, JAM NUT, WITH ACCESSORY THREADS
SAE AS95234/3-2019 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, SQUARE FLANGE, BOX MOUNT, REAR, NO ACCESSORY THREAD
SAE AS95234/2-2019 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD
SAE AS95234/5-2019 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, SQUARE FLANGE, PANEL MOUNT, REAR, WITH ACCESSORY THREAD
SAE AS95234/4-2019 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, SQUARE FLANGE, PANEL MOUNT, FRONT, WITH ACCESSORY THREAD
SAE J576-2007 Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices
SAE J576-2010 Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices
SAE J576-1991 Plastic Materials for Use in Optical Parts Such as Lenses and reflectors of Motor Vehicle Lighting Devices
SAE J576-1986 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES
SAE J576-1981 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES
SAE J576D-1976 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES
SAE J576B-1966 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS, SUCH AS LENSES AND REFLECTORS, OF MOTOR VEHICLE LIGHTING DEVICES
SAE J576-1960 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS, SUCH AS LENSES AND REFLECTORS, OF MOTOR VEHICLE LIGHTING DEVICES
SAE J576A-1963 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS, SUCH AS LENSES AND REFLECTORS, OF MOTOR VEHICLE LIGHTING DEVICES
SAE J576C-1970 Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices

RU-GOST R, reflective attachment

GOST 15843-1979 Accessories for industrial radiography. Main dimensions
GOST 21485.1-1976 Flushing tanks with accessories. Plastic counterpressure float valve. Desing and principal dimensions
GOST 21485.2-1976 Flushing tanks with accessories. Brass counterpressure float valve. Design and principal dimensions
GOST R IEC 60522-2001 X-ray tube assemblies. Methods for determination of the permanent filtration
GOST 27794-1988 Black and white photographic materials on opaque base. Conditions for determination of optical density in reflected light
GOST R 8.828-2013 State systems for ensuring the uniformity of measurements. Method of measurement of spectral diffuse reflectance of photovoltaic elements and solar collectors at angles of incidence of the radiation from 5 ° to 85 °
GOST R 59742-2021 Optics and photonics. Lasers and laser-related equipment. Optical elements for laser equipment. Test methods for specular reflectance and regular transmittance

Standard Association of Australia （SAA）, reflective attachment

AS/NZS 1301.515:2017 Methods of test for pulp and paper, Method 515: Measurement of diffuse radiance factor (diffuse reflectance factor) — Indoor daylight conditions (ISO brightness)
AS/NZS 1301.455:2014
AS/NZS ISO 8980.4:2011
AS/NZS 1301.530:2016 Methods of test for pulp and paper — Determination of colour by diffuse reflectance, Method 530: Indoor daylight conditions (C/2°)
AS/NZS 1301.540:2016 Methods of test for pulp and paper — Determination of colour by diffuse reflectance, Method 540: Indoor illumination conditions (D50/2°)
AS/NZS 1301.535:2016 Methods of test for pulp and paper — Determination of colour by diffuse reflectance, Method 535: Outdoor daylight conditions (D65/10°)
AS 1081.1:1990 Acoustics - Measurement of airborne noise emitted by rotating electrical machinery - Engineering method for free-field conditions over a reflective plane

AT-ON, reflective attachment

ONORM EN 28362-2-1994 Injection containers for injectables and accessories. Part 2: Closures for injection vials (ISO 8362-2:1988)
ONORM EN 28362-3-1994 Injection containers for injectables and accessories. Part 3: Aluminium caps for injection vials (ISO 8362-3:1989)
ONORM A 2160-1988 Working aids and accessories for overhead- projectors for educational purposes;definitons
ONORM EN 28362-1-1994 Injection containers for injectables and accessories. Part 1: Injection vials made of glass tubing (ISO 8362-1:1989)
ONORM A 2161-1991 Working aids and accessory for overhead-projectors for educational purposes; overhead-transparents; Performance requirements and lest specifications
ONORM EN 28362-4-1994 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass (ISO 8362-4:1989)

NL-NEN, reflective attachment

NEN-ISO 8362-2:1993 Injection containers for injectables and accessories. Part 2: Closures for injection vials (ISO 8362-2:1988)
NEN-ISO 8362-4:1993 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass (ISO 8362-4:1989)

国家市场监督管理总局、中国国家标准化管理委员会, reflective attachment

GB/T 36938-2018 Textile machinery and accessories—Strips for water jet solidification
GB/T 18910.62-2019 Liquid crystal display devices—Part 6-2: Measuring methods for liquid crystal display modules—Reflective type
GB/T 40277-2021 Paper, board and pulps—Measurement of diffuse blue reflectance factor( ISO brightness)—Indoor daylight conditions

Professional Standard - Medicine, reflective attachment

YY 0614-2007 Single-use higy-pressure angiographic stringes and accessories

IT-UNI, reflective attachment

UNI ISO 20911:2021 Radio frequency identification (RFID) tyre tags -- Tyre attachment classification

国家食品药品监督管理局, reflective attachment

YY/T 0614-2017 Disposable high-pressure contrast syringes and accessories
YY/T 0614-2007 Disposable high-pressure contrast syringes and accessories

ZA-SANS, reflective attachment

SANS 8362-1:1989 Injection containers for injectables and accessories Part 1: Injection vials made of glass tubing

Professional Standard - Labor and Labor Safety, reflective attachment

LD 88-1996 Specifications and Testing Methods of Retroreflective Safety Signs for Mines

Professional Standard-Safe Production, reflective attachment

AQ 2014-2008 Specifications and testing methods of retroreflective safety signs for mines

Professional Standard - Coal, reflective attachment

MT/T 1053-2008 Technical conditions of microscope photometer for vitrinite reflectance determination

国家安全生产监督管理总局, reflective attachment

MT/T 1053-2007 Microscope photometer technical conditions for measuring vitrinite reflectance

CEN - European Committee for Standardization, reflective attachment

EN ISO 8362-4:2004 Injection containers and accessories - Part 4: Injection vials made of moulded glass

International Electrotechnical Commission (IEC), reflective attachment

IEC 60856:1986/AMD1:1991 Amendment 1 - Pre-recorded optical reflective videodisk system 'Laser vision' 50 Hz/625 lines - PAL
IEC 60857:1986/AMD2:1997 Amendment 2 - Pre-recorded optical reflective videodisk system 'Laser vision' 60 Hz/525 lines - M/NTSC
IEC 60857:1986/AMD1:1991 Amendment 1 - Pre-recorded optical reflective videodisk system 'Laser vision' 60 Hz/525 lines - M/NTSC
IEC 62149-8:2014 Fibre optic active components and devices - Performance standard - Part 8: Seeded reflective semiconductor optical amplifier devices
IEC 62149-9:2014 Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers
IEC 60455-3-8:2021 RLV Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories
IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories
IEC 61747-6-2:2011 Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type
IEC 60747-5-14:2022 Semiconductor devices - Part 5-14: Optoelectronic devices - Light emitting diodes - Test method of the surface temperature based on the thermoreflectance method
IEC 61753-041-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment
IEC 60747-5-15:2022 Semiconductor devices - Part 5-15: Optoelectronic devices - Light emitting diodes - Test method of the flat-band voltage based on the electroreflectance spectroscopy

European Committee for Electrotechnical Standardization（CENELEC）, reflective attachment

EN 62149-8:2014 Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices
EN 62149-9:2014 Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers

ES-UNE, reflective attachment

UNE-EN 62149-8:2014 Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices (Endorsed by AENOR in August of 2014.)
UNE-ISO 5631-2:2015 Paper and board. Determination of colour by diffuse relfectance. Part 2: Outdoor daylight conditions (D65/10º)
UNE-EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN 62149-9:2014 Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers (Endorsed by AENOR in October of 2014.)

International Telecommunication Union (ITU), reflective attachment

ITU-T Z.130 AMD 1-2006 Extended Object Definition Language (eODL): Techniques for distributed software component development Conceptual foundation notations and technology mappings Amendment 1: New Annex E eODL to CIDL mapping Study Group 17
ITU-R QUESTION 69-16-2004 Conditions for a satisfactory television service in the presence of reflected signals
ITU-R QUESTION 69-1/6-2004 Conditions for a satisfactory television service in the presence of reflected signals

工业和信息化部, reflective attachment

YD/T 2339.1-2021 Accessories for laying radio frequency coaxial cables Part 1: Feeder clamps

NEMA - National Electrical Manufacturers Association, reflective attachment

NEMA C136.6-1990 Roadway Lighting Equipment - Metal Heads and Reflector Assemblies - Mechanical and Optical Interchangeability
NEMA C136.6-1984 ROADWAY LIGHTING EQUIPMENT - METAL HEADS AND REFLECTOR ASSEMBLIES - MECHANICAL AND OPTICAL INTERCHANGEABILITY

North Atlantic Treaty Organization Standards Agency, reflective attachment

STANAG 3643-1973 COATING, REFLECTION REDUCING FOR GLASS ELEMENTS USED IN AIRCREW STATION DISPLAYS

Indonesia Standards, reflective attachment

SNI ISO 5631-3:2014 Paper and board – Determination of color by diffuse reflectance – Part 3: Indoor illumination conditions (D50/2°)
SNI ISO 5631-2:2014 Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10°)
SNI ISO 5631-1:2014 Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2°)

Defense Logistics Agency, reflective attachment

DLA MIL-DTL-83538/9 B-2008 CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ADAPTER, ACCESSORY, LAUNCHER RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC)
DLA DSCC-DWG-89013 REV D-2006 CONNECTOR ACCESSORIES, ADAPTER, SHRINK BOOT, RFI/EMI, STRAIGHT, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV)
DLA DSCC-DWG-89014 REV D-2006 CONNECTOR ACCESSORIES, ELECTRICAL ADAPTER, SHRINK BOOT, RFI/EMI, STRAIGHT, CATEGORY 3C (FOR MIL-DTL-38999 SERIES I AND II)
DLA DSCC-DWG-89020 REV D-2004 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 90 DEG., CATEGORY 3C (MIL-DTL-38999 III AND IV)
DLA MIL-DTL-12883/10 F-2003 SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS (ELECTRON TUBE, BOTTOM MOUNTING, SADDLE TYPE WITHOUT SHIELD BASE, 7 CONTACT, RADIAL)

ANS - American Nuclear Society, reflective attachment

58.11-1995 Design criteria for safe shutdown following selected design basis events in light water reactors (Addendum: 07/23/2002)

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, reflective attachment

QUESTION 69-1/6-2004 Conditions for a satisfactory television service in the presence of reflected signals

Hebei Provincial Standard of the People's Republic of China, reflective attachment

DB13/T 5696-2023 Rapid defect screening method for GaN HEMT RF power devices based on high temperature reverse bias test

Professional Standard - Public Safety Standards, reflective attachment

GA 480.4-2004 Rules for testing of fire safety signs-Part 4:Retroreflective fire safety signs

应急管理部, reflective attachment

XF 480.4-2004 General technical conditions for fire safety signs Part 4: Retroreflective fire safety signs
XF 480.5-2004 General technical conditions for fire safety signs Part 5: Fluorescent reflective fire safety signs

NZ-SNZ, reflective attachment

AS/NZS 1301.520:2016 Methods of test for pulp and paper Part 520: Measurement of diffuse radiance factor (diffuse reflectance factor)-Outdoor daylight conditions (D65 brightness)

VN-TCVN, reflective attachment

TCVN 1865-1-2010 Paper,board and pulps.Measurement of diffuse blue reflectance factor.Part1:Indoor daylight conditions(ISO brightness)
TCVN 1865-2-2010 Paper,board and pulps.Measurement of diffuse blue reflectance factor.Part2:outdoor daylight conditions(D65 brightness)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., reflective attachment

IEEE C136.6-1997 American National Standard for Roadway Lighting Equipment - Metal Heads and Reflector Assemblies - Mechanical and Optical Interchangeability

未注明发布机构, reflective attachment

BS ISO 2470-2:2008(2009) Paper, board and pulps — Measurement of diffuse blue reflectance factor Part 2 : Outdoor daylight conditions (D65 brightness)

(U.S.) Telecommunications Industries Association , reflective attachment

TIA-455-107-A-1999 FOTP-107 Determination of Component Reflectance or Link/System Return Loss Using a Loss Test Set

GB-REG, reflective attachment

REG NASA-LLIS-0203-1992 Lessons Learned - Corrosion of Base Materials by Reaction Products Resulted from the Expected Release of Small Quantities of a Hypergolic Propellant (Nitrogen Tetroxide, N204) Reacting with Externally Applied Tape on Nearby Component.