ZH
RU
ES
Conditions for UV separation
Conditions for UV separation, Total:85 items.
In the international standard classification, Conditions for UV separation involves: Analytical chemistry, Pipeline components and pipelines, Paints and varnishes, Inks. Printing inks, Waxes, bituminous materials and other petroleum products, Optoelectronics. Laser equipment, Construction materials, Road engineering, Medical equipment, Body care equipment, Electrical engineering in general, Shipbuilding and marine structures in general, Iron and steel products, Plastics, Lubricants, industrial oils and related products, Fibre optic communications, Components for electrical equipment, Clothes, Domestic safety, Office machines, Reinforced plastics, Domestic, commercial and industrial heating appliances.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Conditions for UV separation
- GB/T 13971-1992 Specification of ultra-violet gas analyzers
- GB/T 13971-2013 Specification of ultraviolet gas analyzers
- GB/T 17121-1997 Anti-counterfeiting stamp-ink. Part 1: Technical requirements of UV-excitation flourescent anti-counterfeiting stamp-ink
- GB/T 17001.1-1997 Anti-counterfeiting ink. Part 1:Technical requirement of ultraviolet fluorecent ink
- GB 9089.5-2008 Electrical Installations for outdoor sites under heavy conditions.Part 5: Operating requirements
- GB/T 9089.5-2008 Electrical installations for outdoor sites under heavy conditions - Part 5: Operating requirements
- GB/T 9089.4-2008 Electrical installations for outdoor sites under heavy conditions.Part 4:Requirements for the installation
- GB/T 9089.3-2008 Electrical installations for outdoor sites under heavy conditions.Part 3:General requirements for equipment and ancillaries
- GB/T 9089.1-2008 Electrical installations for outdoor sites under heavy conditions.Part 1: Scope and definitions
- GB/T 9089.2-2023 Electrical installations for outdoor sites under heavy conditions—Part 2: General protection requirements
- GB/T 9089.2-2008 Electrical installations for outdoor sites under heavy conditions.Part 2:General protection requirements
Korean Agency for Technology and Standards (KATS), Conditions for UV separation
- KS M ISO 8580:2009 Rubber and plastics hoses－Determination of ultra-violet resistance under static conditions
- KS M ISO 8580:2013 Rubber and plastics hoses－Determination of ultra-violet resistance under static conditions
- KS M ISO 11997-2-2014(2019) Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet(salt fog)/dry/humidity/UV light
- KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
KR-KS, Conditions for UV separation
- KS M ISO 8580-2009 Rubber and plastics hoses－Determination of ultra-violet resistance under static conditions
Danish Standards Foundation, Conditions for UV separation
- DS/EN ISO 8580:1995 Rubber and plastics hoses - Determination of ultraviolet resistance under static conditions
- DS/EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light
- DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
未注明发布机构, Conditions for UV separation
German Institute for Standardization, Conditions for UV separation
- DIN EN ISO 11997-2:2013-12 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013); German version EN ISO 11997-2:2013
- DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
- DIN EN ISO 16474-3:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013); German version EN ISO 16474-3:2013
- DIN EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021); German version EN ISO 16474-3:2021
- DIN 51817:2014-08 Testing of lubricants - Determination of oil separation from greases under static conditions
- DIN EN 17763:2022-12 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions; German version EN 17763:2022
- DIN EN 17763:2022 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- DIN EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013); German version EN ISO 11997-2:2013
- DIN EN 10271:1998 Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions; German version EN 10271:1998
- DIN 51817:1998 Testing of lubricants - Determination of oil separation from greases under static conditions
- DIN 51817:2014 Testing of lubricants - Determination of oil separation from greases under static conditions
Association Francaise de Normalisation, Conditions for UV separation
- NF EN ISO 11997-2:2013 Peintures et vernis - Détermination de la résistance aux conditions de corrosion cyclique - Partie 2 : brouillard salin/sécheresse/humidité/lumière UV
- NF X41-004-2*NF EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: wet (salt fog)/dry/humidity/UV light
- NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
- NF EN 17763:2022 Centrifugeuses - Centrifugeuses à combustible pour la marine - Détermination des performances de séparation des particules et du débit certifié (CFR) dans des conditions d'essai définies
- NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
- NF P52-307*NF DTU 65.14:2006 Building works - Construction of hot water operated underfloor heating - Part 1 : contract hill of technical clauses - Separate, insulated floor tiles - Part 2 : contract bill of technical clauses - Tiles other than separate insulated floor tiles - Part 3
- NF EN IEC 62561-3:2023 Composants des systèmes de protection contre la foudre (CSPF) - Partie 3 : exigences pour les éclateurs d'isolement
Heilongjiang Provincial Standard of the People's Republic of China, Conditions for UV separation
- DB23/T 2077-2018 Determination of sodium dodecylbenzenesulfonate in water by high performance liquid chromatography separation with ultraviolet detection
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Conditions for UV separation
- GB/T 36084-2018 Nanotechnology—Determination of copper, manganese and chromium ions in aqueous solution—Ultraviolet-visible spectrophotometry
Lithuanian Standards Office , Conditions for UV separation
- LST EN ISO 11997-2:2006 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2000)
- LST EN ISO 11151-1:2002 Laser and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)
- LST EN 60335-2-27-2014 Household and similar electrical appliances - Safety -- Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation (IEC 60335-2-27:2009, modified)
AENOR, Conditions for UV separation
- UNE-EN ISO 11997-2:2014 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
European Committee for Standardization (CEN), Conditions for UV separation
- EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light
- EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
- prEN 17763-2021 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- EN 17763:2022 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
- EN 13758-1:2006 Textiles - Solar UV Protective Properties - Part 1: Method of Test for Apparel Fabrics (Incorporates Amendment A1: 2006)
American Society for Testing and Materials (ASTM), Conditions for UV separation
- ASTM D4799/D4799M-08(2013)e1 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
- ASTM D4799/D4799M-17(2023) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
- ASTM D4799/D4799M-17 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ES-UNE, Conditions for UV separation
- UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
- UNE-EN 17763:2023 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Conditions for UV separation
- ASHRAE KC-03-11-1-2003 Analysis and Validation of Particle Separation Efficiency in a Centrifugal Field Under Laminar and Perfect Mixing Conditions
国家市场监督管理总局、中国国家标准化管理委员会, Conditions for UV separation
- GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges
- GB/T 9089.1-2021 Electrical installations for outdoor sites under heavy conditions—Part 1: Vocabulary
Japanese Industrial Standards Committee (JISC), Conditions for UV separation
- JIS P 8220-3:2020 Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at greater than 85 degree C
International Organization for Standardization (ISO), Conditions for UV separation
- ISO 18242:2016/Amd 1:2011 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps — Amendment 1: Worst-case conditions for testing
- ISO 18242:2016/FDAmd 1 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps — Amendment 1: Worst-case conditions for testing
British Standards Institution (BSI), Conditions for UV separation
- BS 3900-F19:2000 Methods of test for paint - Durability tests on paint films - Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humidity/UV light - Part F19: Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/hum
- BS EN 17763:2022 Centrifuges. Marine fuel centrifuges. Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- BS 2782-5 Method 540C:1988 Methods of testing plastics - Optical and colour properties, weathering - Determination of ultraviolet radiation intensity using polysulphone film
- 21/30441619 DC BS EN 17763. Centrifuges. Marine fuel centrifuges. Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- BS 7254 Sec.6.2:1990 Orthopaedic implants. Forgings. Method for specifying forgings
SAE - SAE International, Conditions for UV separation
- SAE J1864-1987 METHOD FOR EVALUATING MATERIAL SEPARATION IN AUTOMOTIVE SEALERS UNDER PRESSURE IN STATIC CONDITIONS
Society of Automotive Engineers (SAE), Conditions for UV separation
- SAE J1864-1993 METHOD FOR EVALUATING MATERIAL SEPARATION IN AUTOMOTIVE SEALERS UNDER PRESSURE IN STATIC CONDITIONS
International Electrotechnical Commission (IEC), Conditions for UV separation
- IEC 60335-2-27/COR1:2015 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation; Corrigendum 1
- IEC 60335-2-27/AMD1:2000 Safety of household and similar electrical appliances - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation; Amendment 1
- IEC 60335-2-27/AMD1:2004 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
- IEC 60335-2-27:2009/AMD1:2012 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
- IEC 60335-2-27:2009/AMD2:2015 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
- IEC 60335-2-27/AMD2:2007 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation; Amendment 2
AT-ON, Conditions for UV separation
- OENORM EN 17763-2021 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
(U.S.) Ford Automotive Standards, Conditions for UV separation
American National Standards Institute （ANSI), Conditions for UV separation
- ANSI/TIA/EIA 455-50B-1998 Light Launch Conditions for Long Length Graded-Index Optical Fiber Spectral Attenuation Measurements
- ANSI/ASTM E1666a:1995 Classification for the Serviceability of an Office Facility for Work Outside Normal Hours or Conditions (04.11)
- ANSI/ASTM E1666:1995 Classification for the Serviceability of an Office Facility for Work Outside Normal Hours or Conditions (04.11)
- ANSI/ASTM E1666-1995A Classification for the Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
RU-GOST R, Conditions for UV separation
- GOST 17516-1972 Electrical articles. Operating conditions as to environment mechanical aspects influence
- GOST R 56815-2015 Polymer composites. Method for determination specific work of exfoliation in tearing off conditions GIC
National Aeronautics and Space Administration (NASA), Conditions for UV separation
- NASA-CR-1316-1969 A theoretical analysis of the free vibration of discretely stiffened cylindrical shells with arbitrary end conditions
CENELEC - European Committee for Electrotechnical Standardization, Conditions for UV separation
- EN 60335-2-27:1992/A2:1992 AMD 2 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Ultra-Violet and Infra-Red Radiation Skin Treatment Appliances for Household and Similar Use
Underwriters Laboratories (UL), Conditions for UV separation
- UL 1691 CRD-2017 UL Standard for Safety Single Pole Locking-Type Separable Connectors - Section / Paragraph Reference: Supplement SA Subject: Supplement SA: Replacement Enclosure (Housing) for use with specific manufacturer’s Single Pole Locking Type Separable Attachment