Nano and Molecular Weight

Nano and Molecular Weight, Total:491 items.

In the international standard classification, Nano and Molecular Weight involves: Vocabularies, Physics. Chemistry, Test conditions and procedures in general, Analytical chemistry, Textile fibres, Construction materials, Rubber and plastics products, Optics and optical measurements, Astronomy. Geodesy. Geography, Plastics, Electronic display devices, Electronic components in general, Medical equipment, Materials for aerospace construction, Materials for the reinforcement of composites, Galvanic cells and batteries, Linear and angular measurements, Products of the chemical industry, Installations in buildings, Insulating materials, Pulps, Paper and board, Occupational safety. Industrial hygiene.

British Standards Institution (BSI), Nano and Molecular Weight

PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
PD CEN ISO/TS 80004-12:2017 Nanotechnologies. Vocabulary. Quantum phenomena in nanotechnology
BS IEC 62607-3-1:2014 Nanomanufacturing. Key control characteristics. Luminescent nanomaterials. Quantum efficiency
BS EN 62607-3-1:2014 Nanomanufacturing. Key control characteristics - Luminescent nanomaterials. Quantum efficiency
PD CEN ISO/TR 11811:2012 Nanotechnologies. Guidance on methods for nano- and microtribology measurements
BS PD CEN ISO/TR 11811:2012 Nanotechnologies — Guidance on methods for nano - and microtribology measurements
PD CEN ISO/TS 19807-1:2022 Nanotechnologies. Magnetic nanomaterials. Specification of characteristics and measurements for magnetic nanosuspensions
PD ISO/TS 19807-1:2019 Nanotechnologies. Magnetic nanomaterials. Specification of characteristics and measurements for magnetic nanosuspensions
BS PD CEN ISO/TS 17200:2015 Nanotechnology. Nanoparticles in powder form. Characteristics and measurements
PD IEC TS 62607-5-3:2020 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Measurements of charge carrier concentration
PD ISO/TR 11360:2010 Nanotechnologies. Methodology for the classification and categorization of nanomaterials
BS EN ISO 17200:2020 Nanotechnology. Nanoparticles in powder form. Characteristics and measurements
DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS PD CEN ISO/TS 12025:2015 Nanomaterials. Quantification of nano-object release from powders by generation of aerosols
BS PD IEC/TS 62607-5-1:2014 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Carrier transport measurements
PD IEC/TS 62607-5-1:2014 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Carrier transport measurements
BS DD ISO/TS 11308:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using thermogravimetric analysis
BS PD ISO/TS 21236-2:2021 Nanotechnologies. Clay nanomaterials. Specification of characteristics and measurements for clay nanoplates used for gas-barrier film applications
BS PD CEN ISO/TS 19807-2:2023 Nanotechnologies — Magnetic nanomaterials Part 2 : Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction
PD CEN ISO/TS 23302:2022 Nanotechnologies. Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them
PD ISO/TS 20660:2019 Nanotechnologies. Antibacterial silver nanoparticles. Specification of characteristics and measurement methods
PD ISO/TS 19808:2020 Nanotechnologies. Carbon nanotube suspensions. Specification of characteristics and measurement methods
BS PD ISO/TS 19807-2:2021 Nanotechnologies. Magnetic nanomaterials. Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction
PD ISO/TS 21236-2:2021 Nanotechnologies. Clay nanomaterials. Specification of characteristics and measurements for clay nanoplates used for gas-barrier film applications
PD ISO/TS 23690:2023 Nanotechnologies. Multiwall carbon nanotubes. Determination of carbon impurity content by thermogravimetric analysis
19/30380628 DC BS EN ISO 17200. Nanotechnology. Nanoparticles in powder form. Characteristics and measurements
PD ISO/TR 27628:2007 Workplace atmospheres. Ultrafine, nanoparticle and nano-structured aerosols. Inhalation exposure characterization and assessment
PD ISO/TS 23367-1:2022 Nanotechnologies. Performance characteristics of nanosensors for chemical and biomolecule detection. Detection performance
BS PD IEC/TS 62607-4-3:2015 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Contact and coating resistivity measurements for nanomaterials
BS ISO 19749:2021 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
PD IEC/TS 62607-4-3:2015 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Contact and coating resistivity measurements for nanomaterials
PD IEC TS 62607-4-8:2020 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Determination of water content in electrode nanomaterials, Karl Fischer method
PD ISO/TS 5094:2023 Nanotechnologies. Assessment of peroxidase-like activity of metal and metal oxide nanoparticles
BS EN ISO 21363:2022 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
BS EN ISO 19749:2023 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS ISO 21363:2020 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
PD CEN ISO/TS 21362:2021 Nanotechnologies. Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation
BS PAS 133:2007 Terminology for common nanoscale measurement and instrumentation
PAS 133-2007 Terminology for nanoscale measurement and instrumentation
PD ISO/TS 18827:2017 Nanotechnologies. Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
PD IEC TS 62607-3-3:2020 Nanomanufacturing. Key control characteristics. Luminescent nanomaterials. Determination of fluorescence lifetime of semiconductor quantum dots using time correlated single photon counting (TCSPC)
BS PD 6699-2:2007 Nanotechnologies – Part 2: Guide to safe handling and disposal of manufactured nanomaterials
18/30351714 DC BS ISO 21363. Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
18/30351679 DC BS ISO 19749. Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
PD ISO/TR 21386:2019 Nanotechnologies. Considerations for the measurement of nano-objects and their aggregates and agglomerates (NOAA) in environmental matrices
PD ISO/TS 21237:2020 Nanotechnologies. Air filter media containing polymeric nanofibres. Specification of characteristics and measurement methods
PD IEC TS 62607-9-1:2021 Nanomanufacturing. Key control characteristics. Traceable spatially resolved nano-scale stray magnetic field measurements. Magnetic force microscopy
PD CEN ISO/TS 19590:2019 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
PD ISO/TS 21412:2020 Nanotechnologies. Nano-object-assembled layers for electrochemical bio-sensing applications. Specification of characteristics and measurement methods
PD IEC/TS 62622:2012 Nanotechnologies. Description, measurement and dimensional quality parameters of artificial gratings
BS EN ISO 638-2:2022 Paper, board, pulps and cellulosic nanomaterials. Determination of dry matter content by oven-drying method. Suspensions of cellulosic nanomaterials

European Committee for Standardization (CEN), Nano and Molecular Weight

EN ISO/TS 27687:2009 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate
prCEN ISO/TS 80004-12 rev Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology
CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013)
EN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)
CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements
CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017)
CEN ISO/TS 19807-1:2022 Nanotechnologies - Magnetic nanomaterials - Part 1: Specification of characteristics and measurements for magnetic nanosuspensions (ISO/TS 19807-1:2019)
EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
CEN ISO/TS 19807-2:2023 Nanotechnologies - Magnetic nanomaterials - Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction (ISO/TS 19807-2:2021)
PD CEN/TS 17010:2016 Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them
EN ISO/TS 21362:2021 Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation
prEN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
CEN ISO/TS 21362:2021 Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation (ISO/TS 21362:2018)
CEN ISO/TS 21083-2:2019 Test method to measure the efficiency of air filtration media against spherical nanomaterials - Part 2: Size range from 3 nm to 30 nm (ISO/TS 21083-2:2019)
CEN ISO/TS 23302:2022 Nanotechnologies - Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them (ISO/TS 23302:2021)
EN ISO 638-2:2021 Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials (ISO 638-2:2021)
EN ISO 638-2:2022 Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials (ISO 638-2:2022)

Danish Standards Foundation, Nano and Molecular Weight

DS/CEN ISO/TS 27687:2010 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate
DS/ISO/TS 17200:2013 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
DS/CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements
DS/ISO/TS 11931:2013 Nanotechnologies - Nanoscale calcium carbonate in powder form - Characteristics and measurement
DS/ISO/TS 11937:2013 Nanotechnologies - Nanoscale titanium dioxide in powder form - Characteristics and measurement
DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
DS/ISO/TR 11360:2010 Nanotechnologies - Methodology for the classification and categorization of nanomaterials
DS/ISO 19749:2021 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy
DS/ISO/TS 21236-2:2021 Nanotechnologies – Clay nanomaterials – Part 2: Specification of characteristics and measurements for clay nanoplates used for gas-barrier film applications
DS/ISO/TS 19807-2:2021 Nanotechnologies – Magnetic nanomaterials – Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction
DS/ISO/TS 21362:2020 Nanotechnologies – Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation
DS/CEN ISO/TS 21362:2021 Nanotechnologies – Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation (ISO/TS 21362:2018)
DS/ISO 638-2:2021 Paper, board, pulps and cellulosic nanomaterials – Determination of dry matter content by oven-drying method – Part 2: Suspensions of cellulosic nanomaterials
DS/ISO/TS 12901-1:2012 Nanotechnologies - Occupational risk management applied to engineered nanomaterials - Part 1: Principles and approaches

Indonesia Standards, Nano and Molecular Weight

SNI ISO/TS 27687:2011 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate
SNI ISO/TR 11360:2011 Nanotechnologies - Methodology for the classification and categorization of nanomaterials

Korean Agency for Technology and Standards (KATS), Nano and Molecular Weight

KS A ISO TS 27687:2009 Nanotechnologies－Terminology and definitions for nano-objects－ Nanoparticle, nanofibre and nanoplate
KS C IEC 62607-3-1:2018 Nanomanufacturing — Key control characteristics — Part 3-1: Luminescent nanomaterials — Quantum efficiency
KS C IEC 62607-3-1-2023 Nanomanufacturing — Key control characteristics — Part 3-1: Luminescent nanomaterials — Quantum efficiency
KS C IEC TS 62607-5-1:2019 Nanomanufacturing — Key control characteristics — Part 5-1: Thin-film organic/nano electronic devices — Carrier transport measurements
KS D 2716-2008 Measurement of nanoparticle diameter－Transmission electron microscope
KS C IEC TS 62607-4-2:2021 Nanomaunfacturing — Key control characteristics — Part 4-2: Nano-enabled electrical energy storage — Physical characterization of cathode nanomaterials, density measurement
KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
KS D 2711-2008 Evaluation of carbon nanotube soots and non-carbon content-Thermogravimetric analysis
KS C IEC TS 62607-4-5:2019 Nanomanufacturing — Key control characteristics — Part 4-5:Cathode nanomaterials for nano-enabled electrical energy storage — Electrochemical characterization, 3-electrode cell method
KS C ISO TS 18827:2021 Nanotechnologies — Electron spin resonance(ESR) as a method for measuring reactive oxygen species(ROS) generated by metal oxide nanomaterials
KS D 2711-2008(2018) Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
KS D 2711-2023 Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
KS M ISO 638-2-2023 Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method — Part 2: Suspensions of cellulosic nanomaterials
KS D 2712-2008 Evaluation of content of single-walled carbon nanotube using UV-VIS-NIR absorption spectroscopy

RU-GOST R, Nano and Molecular Weight

GOST R 59582-2021 Nanotechnologies. Antibacterial silver nanoparticles. Characteristics and measurement methods
GOST R 59388.1-2021 Nanotechnologies. Clay nanomaterials. Part 1. Layered clay nanomaterials. Characteristics and measurement methods
GOST R 56085-2014 Nanotechnologies. Part 4. Nanostructured materials. Terms and definitions
GOST R 55417-2013 Nanotechnologies. Part 3. Carbon nano-objects. Terms and definitions
GOST ISO/TS 80004-3-2014 Nanotechnologies. Part 3. Carbon nano-objects. Terms and definitions
GOST R 56662-2015 Nanotechnologies. Part 8. Nanomanufacturing processes. Terms and definitions
GOST ISO/TS 80004-5-2014 Nanotechnologies. Part 5. Nano/bio interface. Terms and definitions
GOST ISO/TS 80004-7-2014 Nanotechnologies. Part 7. Nanotechnologies for medicine. Terms and definitions
GOST R 56647-2015 Nanotechnologies. Part 6. Characteristics of nano-objects and methods for determination. Terms and definitions
PNST 60-2015 Polymer soextrusion film modified nanocomposites. General specifications
GOST R 55416-2013 Nanotechnologies. Part 1. Core terms and definitions
GOST ISO/TS 80004-1-2014 Nanotechnologies. Part 1. Core terms and definitions
GOST ISO/TS 80004-1-2017 Nanotechnologies. Part 1. Core terms and definitions

International Organization for Standardization (ISO), Nano and Molecular Weight

ISO/TS 17200:2013 Nanotechnology.Nanoparticles in powder form.Characteristics and measurements
ISO/TS 80004-12:2016 Nanotechnologies — Vocabulary — Part 12: Quantum phenomena in nanotechnology
ISO/TS 80004-11:2017 Nanotechnologies — Vocabulary — Part 11: Nanolayer, nanocoating, nanofilm, and related terms
ISO/TS 19807-1:2019 Nanotechnologies — Magnetic nanomaterials — Part 1: Specification of characteristics and measurements for magnetic nanosuspensions
ISO/TR 11360:2010 Nanotechnologies - Methodology for the classification and categorization of nanomaterials
ISO/TS 23366:2023 Nanotechnologies — Performance evaluation requirements for quantifying biomolecules using fluorescent nanoparticles in immunohistochemistry
ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements
ISO/TS 21236-1:2019 Nanotechnologies — Clay nanomaterials — Part 1: Specification of characteristics and measurement methods for layered clay nanomaterials
ISO/TS 11931:2012 Nanotechnologies - Nanoscale calcium carbonate in powder form - Characteristics and measurement
ISO 17200:2020 Nanotechnology — Nanoparticles in powder form — Characteristics and measurements
ISO/TS 21236-2:2021 Nanotechnologies — Clay nanomaterials — Part 2: Specification of characteristics and measurements for clay nanoplates used for gas-barrier film applications
ISO/TS 11937:2012 Nanotechnologies - Nanoscale titanium dioxide in powder form - Characteristics and measurement
ISO/TS 19808:2020 Nanotechnologies — Carbon nanotube suspensions — Specification of characteristics and measurement methods
ISO/TS 19807-2:2021 Nanotechnologies — Magnetic nanomaterials — Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction
ISO/TS 23302:2021 Nanotechnologies — Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them
ISO/TS 21237:2020 Nanotechnologies — Air filter media containing polymeric nanofibres — Specification of characteristics and measurement methods
ISO/TS 11308:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using thermogravimetric analysis
ISO/TS 23690:2023 Nanotechnologies — Multiwall carbon nanotubes — Determination of carbon impurity content by thermogravimetric analysis
ISO/DTS 22298:2023 Nanotechnologies — Silica nanomaterials — Characteristics and measurement methods for silica with ordered nanopore array (SONA)
ISO/TS 22298:2023 Nanotechnologies — Silica nanomaterials — Characteristics and measurement methods for silica with ordered nanopore array (SONA)
ISO/TS 22298:2024 Nanotechnologies — Silica nanomaterials — Specification of characteristics and measurement methods for silica with ordered nanopore array (SONA)
ISO/TS 23367-1:2022 Nanotechnologies — Performance characteristics of nanosensors for chemical and biomolecule detection — Part 1: Detection performance
IEC TS 80004-9:2017 Nanotechnologies — Vocabulary — Part 9: Nano-enabled electrotechnical products and systems
IEC TS 80004-9:2017 Nanotechnologies — Vocabulary — Part 9: Nano-enabled electrotechnical products and systems
ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
ISO/TR 23173:2021 Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings
ISO/TS 18827:2017 Nanotechnologies - Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
ISO/TS 21362:2018 Nanotechnologies — Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation
IEC TS 80004-9:2017 Nanotechnologies — Vocabulary — Part 9: Nano-enabled electrotechnical products and systems
IEC/TS 80004-9:2017 Nanotechnologies — Vocabulary — Part 9: Nano-enabled electrotechnical products and systems
ISO/TS 19590:2017 Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
ISO/TS 21412:2020 Nanotechnologies — Nano-object-assembled layers for electrochemical bio-sensing applications — Specification of characteristics and measurement methods
ISO/TS 21975:2020 Nanotechnologies — Polymeric nanocomposite films for food packaging with barrier properties — Specification of characteristics and measurement methods
ISO/TR 21386:2019 Nanotechnologies — Considerations for the measurement of nano-objects and their aggregates and agglomerates (NOAA) in environmental matrices
ISO/TS 12901-1:2012 Nanotechnologies - Occupational risk management applied to engineered nanomaterials - Part 1: Principles and approaches
ISO/CD TS 12901-1 Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 1: Principles and approaches
ISO/DTS 12901-1:2023 Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 1: Principles and approaches
ISO 21400:2018 Pulp — Determination of cellulose nanocrystal sulfur and sulfate half-ester content
IEC TS 62622:2012 Artificial gratings used in nanotechnology — Description and measurement of dimensional quality parameters
ISO 638-2:2021 Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials
ISO 638-2:2022 Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method — Part 2: Suspensions of cellulosic nanomaterials

CH-SNV, Nano and Molecular Weight

SN EN ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)

Lithuanian Standards Office , Nano and Molecular Weight

LST EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)
LST CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017)
LST CEN ISO/TS 21362:2021 Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation (ISO/TS 21362:2018)

SCC, Nano and Molecular Weight

BS PD CEN ISO/TS 80004-12:2017 Nanotechnologies. Vocabulary-Quantum phenomena in nanotechnology
BS PD ISO/TS 80004-12:2016 Nanotechnologies. Vocabulary. Quantum phenomena in nanotechnology
SN-CEN ISO/TS 27687:2009 Nanotechnologies — Terminology and definitions for nano-objects — Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008, Corrected version 2009-02-01)
AWWA ACE65377 Nanotechnology, Nanoparticles and Drinking Water: Threats and Opportunities
SN-CEN ISO/TS 80004-12:2017 Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology (ISO/TS 80004-12:2016)
DANSK DS/EN 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency
CEI EN 62607-3-1:2015 Nanomanufacturing - Key control characteristics Part 3-1: Luminescent nanomaterials - Quantum efficiency
DANSK DS/CEN ISO/TS 80004-12:2017 Nanotechnologies – Vocabulary – Part 12: Quantum phenomena in nanotechnology (ISO/TS 80004-12:2016)
DANSK DS/CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements
DANSK DS/ISO/TS 80004-11:2017 Nanotechnologies – Vocabulary – Part 11: Nanolayer, nanocoating, nanofilm, and related terms
DANSK DS/CEN ISO/TS 17200:2015 Nanotechnology – Nanoparticles in powder form – Characteristics and measurements
DANSK DS/ISO 17200:2020 Nanotechnology – Nanoparticles in powder form – Characteristics and measurements
DANSK DS/ISO/TS 19807-1:2019 Nanotechnologies – Magnetic nanomaterials – Part 1: Specification of characteristics and measurements for magnetic nanosuspensions
BS PD ISO/TS 19807-1:2019 Nanotechnologies. Magnetic nanomaterials-Specification of characteristics and measurements for magnetic nanosuspensions
BS PD CEN ISO/TS 19807-1:2022 Nanotechnologies. Magnetic nanomaterials-Specification of characteristics and measurements for magnetic nanosuspensions
BS PD ISO/TS 23366:2023 Nanotechnologies. Performance evaluation requirements for quantifying biomolecules using fluorescent nanoparticles in immunohistochemistry
DANSK DS/ISO/TS 23366:2023 Nanotechnologies – Performance evaluation requirements for quantifying biomolecules using fluorescent nanoparticles in immunohistochemistry
BS PD IEC TS 62607-5-3:2020 Nanomanufacturing. Key control characteristics-Thin-film organic/nano electronic devices. Measurements of charge carrier concentration
DANSK DS/ISO/TR 11360:2010 Nanotechnologies - Methodology for the classification and categorization of nanomaterials
BS PD ISO/TR 11360:2010 Nanotechnologies. Methodology for the classification and categorization of nanomaterials
DIN IEC /TS 62607-3-2 E:2014 Draft Document - Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC 113/203/CD:2013)
DANSK DS/ISO/TS 11931:2013 Nanotechnologies - Nanoscale calcium carbonate in powder form - Characteristics and measurement
DANSK DS/ISO/TS 21236-1:2019 Nanotechnologies – Clay nanomaterials – Part 1: Specification of characteristics and measurement methods for layered clay nanomaterials
SN-CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017)
DANSK DS/CEN ISO/TS 80004-11:2020 Nanotechnologies – Vocabulary – Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017)
DANSK DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
SN-CEN ISO/TR 11811:2012 Nanotechnologies — Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012)
DIN IEC /TS 80004-10 E:2014 Draft Document - Nanotechnologies - Vocabulary - Part 10: Nano-enabled photonic products and systems (IEC 113/209/CD:2013)
NS-EN ISO 17200:2020 Nanotechnology — Nanoparticles in powder form — Characteristics and measurements (ISO 17200:2020)
DANSK DS/EN ISO 17200:2020 Nanotechnology – Nanoparticles in powder form – Characteristics and measurements (ISO 17200:2020)
DANSK DS/ISO/TS 11937:2013 Nanotechnologies - Nanoscale titanium dioxide in powder form - Characteristics and measurement
SN-CEN/TS 17010:2016 Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them
DANSK DS/CEN/TS 17010:2016 Nanotechnologies – Guidance on measurands for characterising nano-objects and materials that contain them
BS PD ISO/TS 21236-1:2019 Nanotechnologies. Clay nanomaterials-Specification of characteristics and measurement methods for layered clay nanomaterials
DANSK DS/CEN ISO/TS 19807-1:2022 Nanotechnologies – Magnetic nanomaterials – Part 1: Specification of characteristics and measurements for magnetic nanosuspensions (ISO/TS 19807-1:2019)
SN-CEN ISO/TS 19807-1:2022 Nanotechnologies - Magnetic nanomaterials - Part 1: Specification of characteristics and measurements for magnetic nanosuspensions (ISO/TS 19807-1:2019)
DIN CEN ISO/TS 19807-1:2022 Nanotechnologies - Magnetic nanomaterials - Part 1: Specification of characteristics and measurements for magnetic nanosuspensions (ISO/TS 19807-1:2019); German version CEN ISO/TS 19807-1:2022
SN-CEN ISO/TS 17200:2015 Nanotechnology — Nanoparticles in powder form — Characteristics and measurements (ISO/TS 17200:2013)
DANSK DS/ISO/TS 19808:2020 Nanotechnologies – Carbon nanotube suspensions – Specification of characteristics and measurement methods
DANSK DS/ISO/TS 20660:2019 Nanotechnologies – Antibacterial silver nanoparticles – Specification of characteristics and measurement methods
BS PD IEC TS 62607-5-4:2022 Nanomanufacturing. Key control characteristics-Energy band gap measurement of nanomaterials by electron energy loss spectroscopy (EELS)
DANSK DS/ISO/TS 21236-2:2021 Nanotechnologies – Clay nanomaterials – Part 2: Specification of characteristics and measurements for clay nanoplates used for gas-barrier film applications
DANSK DS/ISO/TS 19807-2:2021 Nanotechnologies – Magnetic nanomaterials – Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction
BS PD ISO/TS 23367-1:2022 Nanotechnologies. Performance characteristics of nanosensors for chemical and biomolecule detection-Detection performance
DIN IEC 62607-3-1 E:2012 Draft Document - Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency (IEC 113/130/CD:2011)
BS PD ISO/TS 20660:2019 Nanotechnologies. Antibacterial silver nanoparticles. Specification of characteristics and measurement methods
BS PD ISO/TS 19808:2020 Nanotechnologies. Carbon nanotube suspensions. Specification of characteristics and measurement methods
DANSK DS/IEC/TS 80004-9:2017 Nanotechnologies – Vocabulary – Part 9: Nano-enabled electrotechnical products and systems
DIN IEC /TS 62607-5-1 E:2014 Draft Document - Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements (IEC 113/183/CD:2013)
BS PD ISO/TS 23690:2023 Nanotechnologies. Multiwall carbon nanotubes. Determination of carbon impurity content by thermogravimetric analysis
SN-CEN ISO/TS 23302:2022 Nanotechnologies - Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them (ISO/TS 23302:2021)
BS PD CEN/TR 17222:2019 Textile products and nanotechnologies. Guidance on tests to simulate nanoparticle release. Skin exposure
SN-CEN/TR 17222:2019 Textile products and nanotechnologies — Guidance on tests to simulate nanoparticle release — Skin exposure
DANSK DS/CEN/TR 17222:2019 Textile products and nanotechnologies – Guidance on tests to simulate nanoparticle release – Skin exposure
BS PD ISO/TS 22298:2024 Nanotechnologies. Silica nanomaterials. Specification of characteristics and measurement methods for silica with ordered nanopore array (SONA)
BS PD IEC TS 62607-4-8:2020 Nanomanufacturing. Key control characteristics-Nano-enabled electrical energy storage. Determination of water content in electrode nanomaterials, Karl Fischer method
SN-CEN ISO/TS 19807-2:2023 Nanotechnologies — Magnetic nanomaterials — Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction (ISO/TS 19807-2:2021)
DIN CEN ISO/TS 19807-2:2023 Nanotechnologies - Magnetic nanomaterials - Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction (ISO/TS 19807-2:2021); German version CEN ISO/TS 19807-2:2023
BS PD ISO/TS 5094:2023 Nanotechnologies. Assessment of peroxidase-like activity of metal and metal oxide nanoparticles
DANSK DS/ISO/TS 5094:2023 Nanotechnologies – Assessment of peroxidase-like activity of metal and metal oxide nanoparticles
DANSK DS/ISO 21363:2020 Nanotechnologies – Measurements of particle size and shape distributions by transmission electron microscopy
DANSK DS/ISO 19749:2021 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy
DIN EN ISO 17200 E:2019 Draft Document - Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/DIS 17200:2019); German and English version prEN ISO 17200:2019
DANSK DS/ISO/TS 23367-1:2022 Nanotechnologies – Performance characteristics of nanosensors for chemical and biomolecule detection – Part 1: Detection performance
BS PD ISO/TS 21362:2018 Nanotechnologies. Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation
DANSK DS/ISO/TS 21362:2020 Nanotechnologies – Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation
BS PD CEN ISO/TS 21362:2021 Nanotechnologies. Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation
DIN IEC /TS 62607-4-3 E:2014 Draft Document - Nanomanufacturing - Key control characteristics - Part 4-3: Nano-enabled electrical energy storage - Contact and coating resistivity measurements for nanomaterials (IEC 113/213/CD:2014)
NS-EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
DANSK DS/EN ISO 21363:2022 Nanotechnologies – Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
NS-EN ISO 19749:2023 Nanotechnologies — Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
DANSK DS/EN ISO 19749:2023 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
DANSK DS/ISO/TR 16196:2016 Nanotechnologies – Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials
BS PD CEN/TS 17010:2016 Nanotechnologies. Guidance on measurands for characterising nano-objects and materials that contain them
DIN EN 16966 E:2016 Draft Document - Workplace exposure - Metrics to be used for the measurements of exposure to inhaled nanoparticles (nano-objects and nanostructured materials) such as mass concentration, number concentration and surface area concentration; German and E...
BS PD ISO/TS 18827:2017 Nanotechnologies. Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
BS PD IEC TS 62607-3-3:2020 Nanomanufacturing. Key control characteristics-Luminescent nanomaterials. Determination of fluorescence lifetime of semiconductor quantum dots using time correlated single photon counting (TCSPC)
DIN EN ISO 21363 E:2021 Draft Document – Nanotechnologies – Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020); German and English version prEN ISO 21363:2021
DIN EN ISO 19749 E:2022 Draft Document - Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021); German and English version prEN ISO 19749:2022
DANSK DS/CEN ISO/TS 21362:2021 Nanotechnologies – Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation (ISO/TS 21362:2018)
SN-CEN ISO/TS 21362:2021 Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation (ISO/TS 21362:2018)
DANSK DS/ISO/TS 21237:2020 Nanotechnologies – Air filter media containing polymeric nanofibres – Specification of characteristics and measurement methods
BS PD ISO/TS 23302:2021 Nanotechnologies. Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them
DANSK DS/ISO/TS 23302:2022 Nanotechnologies – Requirements and recommendations for the identification of measures that characterize nano-objects and materials that contain them
BS PD CEN ISO/TS 23302:2022 Nanotechnologies. Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them
DIN IEC /TS 80004-9 E:2014 Draft Document - Nanotechnologies - Vocabulary - Part 9: Nano-enabled electrotechnical products and systems (IEC 113/210/CD:2013)
SN-CEN ISO/TS 21083-2:2019 Test method to measure the efficiency of air filtration media against spherical nanomaterials – Part 2: Size range from 3 nm to 30 nm (ISO/TS 21083-2:2019)
BS PD ISO/TR 21386:2019 Nanotechnologies. Considerations for the measurement of nano-objects and their aggregates and agglomerates (NOAA) in environmental matrices
BS PD ISO/TS 21237:2020 Nanotechnologies. Air filter media containing polymeric nanofibres. Specification of characteristics and measurement methods
DANSK DS/ISO/TR 21386:2019 Nanotechnologies – Considerations for the measurement of nano-objects and their aggregates and agglomerates (NOAA) in environmental matrices
DIN IEC /TS 62607-4-2 E:2015 Draft Document - Nanomanufacturing - Key control characteristics - Part 4-2: Cathode nanomaterials for nano-enabled electrical energy storage - Physical characterization, Density measurement (IEC 113/244/CD:2015)
BS PD IEC TS 62607-9-1:2021 Nanomanufacturing. Key control characteristics-Traceable spatially resolved nano-scale stray magnetic field measurements. Magnetic force microscopy
BS PD ISO/TS 19590:2017 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
BS PD CEN ISO/TS 19590:2019 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
DANSK DS/ISO/TS 19590:2017 Nanotechnologies – Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
DANSK DS/ISO/TS 21412:2020 Nanotechnologies – Nano-object-assembled layers for electrochemical bio-sensing applications – Specification of characteristics and measurement methods
DANSK DS/ISO 638-2:2021 Paper, board, pulps and cellulosic nanomaterials – Determination of dry matter content by oven-drying method – Part 2: Suspensions of cellulosic nanomaterials
DANSK DS/ISO/TS 12901-1:2012 Nanotechnologies - Occupational risk management applied to engineered nanomaterials - Part 1: Principles and approaches
BS PD ISO/TS 21412:2020 Nanotechnologies. Nano-object-assembled layers for electrochemical bio-sensing applications. Specification of characteristics and measurement methods
DANSK DS/CEN ISO/TS 23302:2022 Nanotechnologies – Requirements and recommendations for the identification of measures that characterize nano-objects and materials that contain them (ISO/TS 23302:2021)
DIN CEN ISO/TS 23302:2023 Nanotechnologies - Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them (ISO/TS 23302:2021); German version CEN ISO/TS 23302:2022
BS PD IEC/TS 62622:2012 Nanotechnologies. Description, measurement and dimensional quality parameters of artificial gratings
BS EN ISO 638-2:2021 Paper, board, pulps and cellulosic nanomaterials. Determination of dry matter content by oven-drying method-Suspensions of cellulosic nanomaterials
SN-CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017)
DANSK DS/CEN ISO/TS 19590:2019 Nanotechnologies – Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017)

CEN - European Committee for Standardization, Nano and Molecular Weight

CEN ISO/TS 80004-12:2017 Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology
CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Nano and Molecular Weight

GB/T 30544.12-2023 Nanotechnology Terminology Part 12: Quantum Phenomena in Nanotechnology
GB/T 43196-2023 Nanotechnology Scanning Electron Microscopy to Measure Nanoparticle Size and Shape Distribution
GB/Z 43592.1-2023 Nanotechnologies—Magnetic nanomaterials—Part 1: Specification of characteristics and measurements for magnetic nanosuspensions
GB/T 42977-2023 Determination of optical reliability of nanotechnology nano-photoelectric display quantum dot light conversion film
GB/T 42976-2023 Nanotechnology nano-photoelectric display quantum dot light conversion film optical performance testing method
GB/T 32869-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
GB/T 43682-2024 Nanotechnology: Measurement method of carrier mobility and sheet resistance of sub-nanometer thickness graphene films
GB/T 30544.7-2023 Nanotechnology Terminology Part 7: Nanomedicine Diagnosis and Therapy
GB/Z 44005.1-2024 Nanotechnology Clay Nanomaterials Part 1: Properties and Measurement Methods of Layered Clays
GB/T 2900.105-2022 Electrotechnical terminology—Nano-enabled electrotechnical products and systems
GB/T 41232.3-2023 Nanomanufacturing—Key control characteristics—Nano-enabled electrical energy storage—Part 3: Contact and coating resistivity measurements for nanomaterials
GB/Z 43684-2024 Nanotechnology Description, measurement and dimensional quality parameters of gratings
GB/T 24370-2009 Characterization of CdSe quantum dot nanocrystals.UV-Vis absorption spectroscopy
GB/T 22462-2008 Nano,Sub-micron scale film on steel.Quantitative depth profile analysis.Glow discharge atomic emission spectrometry
GB/T 36084-2018(英文版) 纳米技术水溶液中铜、锰、铬离子含量的测定紫外-可见分光光度法
GB/T 24369.2-2018 Characterization of gold nanorods—Part 2: Measurement methods for optical properties
GB/T 43598-2023 Determination of oxygen content and carbon-oxygen ratio of nanotechnology graphene powder by X-ray photoelectron spectroscopy
GB/Z 43998-2024 Nanotechnology - Method for measuring the concentration of nanoscale carbon black and amorphous silica in ambient air from mixed dust manufacturing

German Institute for Standardization, Nano and Molecular Weight

DIN CEN ISO/TS 80004-12:2017-09*DIN SPEC 52400-12:2017-09 Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology (ISO/TS 80004-12:2016); German version CEN ISO/TS 80004-12:2017
DIN IEC/TS 62607-3-2:2018-09*DIN SPEC 42607-3-2:2018-09 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
DIN CEN ISO/TR 11811:2012-12*DIN SPEC 91217:2012-12 Nanotechnologies - Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012); German version CEN ISO/TR 11811:2012
DIN CEN ISO/TS 80004-11:2020-11 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017); German version CEN ISO/TS 80004-11:2020 / Note: To be replaced by DIN EN ISO 80004-1 (2021-10).
DIN IEC/TS 62607-3-2:2014 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC 113/203/CD:2013)
DIN EN ISO 17200:2020-12 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020); German version EN ISO 17200:2020
DIN IEC/TS 62607-3-2:2018 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
DIN IEC/TS 62607-5-1:2016-07*DIN SPEC 42607-5-1:2016-07 Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements (IEC/TS 62607-5-1:2014)
DIN EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020); German version EN ISO 17200:2020
DIN EN 62607-3-1:2014-12 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency (IEC 62607-3-1:2014); German version EN 62607-3-1:2014
DIN IEC 62607-3-1:2012 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency (IEC 113/130/CD:2011)
DIN CEN ISO/TS 23302:2023-02 Nanotechnologies - Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them (ISO/TS 23302:2021); German version CEN ISO/TS 23302:2022
DIN IEC/TS 62607-4-3:2018-07*DIN SPEC 42607-4-3:2018-07 Nanomanufacturing - Key control characteristics - Part 4-3: Nano-enabled electrical energy storage - Contact and coating resistivity measurements for nanomaterials (IEC/TS 62607-4-3:2015)
DIN CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017); German version CEN ISO/TS 80004-11:2020
DIN IEC/TS 62607-4-2:2019-04*DIN SPEC 42607-4-2:2019-04 Nanomanufacturing - Key control characteristics - Part 4-2: Nano-enabled electrical energy storage - Physical characterization of cathode nanomaterials, density measurement (IEC/TS 62607-4-2:2016)
DIN IEC/TS 62607-5-1:2014 Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements (IEC 113/183/CD:2013)
DIN IEC/TS 80004-9:2014 Nanotechnologies - Vocabulary - Part 9: Nano-enabled electrotechnical products and systems (IEC 113/210/CD:2013)
DIN EN ISO 19749:2023-07 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021); German version EN ISO 19749:2023
DIN EN ISO 21363:2022-03 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020); German version EN ISO 21363:2022
DIN EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
DIN EN 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency (IEC 62607-3-1:2014); German version EN 62607-3-1:2014
DIN CEN ISO/TS 21362:2021-07 Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation (ISO/TS 21362:2018); German version CEN ISO/TS 21362:2021
DIN CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012); German version CEN ISO/TR 11811:2012
DIN CEN ISO/TS 19807-2:2023-09 Nanotechnologies - Magnetic nanomaterials - Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction (ISO/TS 19807-2:2021); German version CEN ISO/TS 19807-2:2023
DIN CEN ISO/TS 19590:2019-11*DIN SPEC 19286:2019-11 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017); German version CEN ISO/TS 19590:2019
DIN IEC/TS 62622:2014-09*DIN SPEC 42622:2014-09 Nanotechnologies - Description, measurement and dimensional quality parameters of artificial gratings (IEC/TS 62622:2012)
DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)

Association Francaise de Normalisation, Nano and Molecular Weight

XP CEN ISO/TS 80004-12:2017 Nanotechnologies - Vocabulaire - Partie 12 : phénomènes quantiques dans les nanotechnologies
NF C90-907-3-1*NF EN 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1 : luminescent nanomaterials - Quantum efficiency
NF EN 62607-3-1:2014 Nanofabrication - Key Control Characteristics - Part 3-1: Luminescent Nanomaterials - Quantum Yield
XP CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulaire - Partie 11 : nanocouche, nanorevêtement, nanofilm et termes associés
FD ISO/TR 11360:2010 Nanotechnologies - Methodology for classification and categorization of nanomaterials
NF EN ISO 17200:2020 Nanotechnologies - Nanoparticles in powder form - Characteristics and measurements
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
FD T16-102*FD ISO/TR 11360:2010 Nanotechnologies - Methodology for the classification and categorization of nanomaterials
XP T16-224*XP ISO/TS 19808:2020 Nanotechnologies - Carbon nanotube suspensions - Specification of characteristics and measurement methods
XP ISO/TS 19808:2020 Nanotechnologies - Suspensions of carbon nanotubes - Specification of characteristics and measurement methods
NF T16-404:2020 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
NF T16-403*NF ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
NF T16-404*NF EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
XP T16-401*XP CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
XP T16-222*XP CEN ISO/TS 21362:2021 Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation
XP X44-070-2*XP CEN ISO/TS 21083-2:2019 Test method to measure the efficiency of air filtration media against spherical nanomaterials - Part 2 : size range from 3 nm to 30 nm
XP T16-104*XP CEN/TS 17010:2017 Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them
XP CEN ISO/TS 21362:2021 Nanotechnologies - Analyse des nano-objets par fractionnement par couplage flux-force asymétrique et à force centrifuge
XP ISO/TS 21975:2020 Nanotechnologies - Polymer nanocomposite films for food packaging with barrier properties - Specification of characteristics and measurement methods
XP CEN ISO/TS 19590:2019 Nanotechnologies - Particle size distribution and concentration of inorganic nanoparticles in an aqueous medium by induced plasma mass spectrometry in single particle mode
NF T12-011-2:2021 Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2 : suspensions of cellulosic nanomaterials
NF T12-011-2*NF EN ISO 638-2:2022 Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2 : suspensions of cellulosic nanomaterials
XP T16-210-1*XP ISO/TS 12901-1:2014 Nanotechnologies - Occupational risk management applied to engineered nanomaterials - Part 1 : principles and approaches
XP ISO/TS 12901-1:2014 Nanotechnologies - Gestion du risque professionnel relatif aux nanomatériaux manufacturés - Partie 1 : principes et approches
NF EN ISO 19749:2023 Nanotechnologies - Determination of particle size and shape distribution by scanning electron microscopy
NF EN ISO 21363:2022 Nanotechnologies - Determination of particle size and shape distribution by transmission electron microscopy
NF EN ISO 638-2:2022 Paper, cardboard, pulp and cellulosic nanomaterials - Determination of dry matter content by oven drying - Part 2: suspensions of cellulosic nanomaterials

International Electrotechnical Commission (IEC), Nano and Molecular Weight

ISO TS 80004-12:2016 Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology
IEC 113/179/CD:2012 ISO/TS 80004-2: Nanotechnologies - Vocabulary - Part 2: Nano-objects: nanoparticle, nanofibre, and nanoplate
IEC 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency
IEC 113/209/CD:2013 IEC 80004-10: Nanotechnologies - Vocabulary - Part 10: Nano-enabled photonic products and systems
IEC TS 62607-3-2:2017 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
ISO TS 80004-11:2017 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms
IEC 113/203/CD:2013 IEC/TS 62607-3-2: Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
IEC TS 62607-5-3:2020 Nanomanufacturing - Key control characteristics - Part 5-3: Thin-film organic/nano electronic devices – Measurements of charge carrier concentration
IEC TS 62607-5-1:2014 Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements
ISO TS 23302:2021 Nanotechnologies - Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them
IEC TS 62607-5-4:2022 Nanomanufacturing - Key control characteristics - Part 5-4: Energy band gap measurement of nanomaterials by electron energy loss spectroscopy (EELS)
IEC TS 62607-4-3:2015 Nanomanufacturing - Key control characteristics - Part 4-3: Nano-enabled electrical energy storage - Contact and coating resistivity measurements for nanomaterials
IEC TS 62607-4-2:2016 Nanomanufacturing - Key control characteristics - Part 4-2: Nano-enabled electrical energy storage - Physical characterization of cathode nanomaterials, density measurement
IEC 113/210/CD:2013 IEC 80004-9: Nanotechnologies - Vocabulary - Part 9: Nano-enabled electrotechnical products and systems
IEC TS 62607-4-8:2020 Nanomanufacturing - Key control characteristics - Part 4-8: Nano-enabled electrical energy storage - Determination of water content in electrode nanomaterials, Karl Fischer method
IEC TS 62607-2-5:2022 Nanomanufacturing - Key control characteristics - Part 2-5: Carbon nanotube materials - Mass density of vertically-aligned carbon nanotubes: X-ray absorption method
IEC TS 62607-4-6:2018 Nanomanufacturing - Key control characteristics - Part 4-6: Nano-enabled electrical energy storage devices - Determination of carbon content for nano electrode materials, infrared absorption method
IEC TS 62607-3-3:2020 Nanomanufacturing - Key control characteristics - Part 3-3: Luminescent nanomaterials - Determination of fluorescence lifetime of semiconductor quantum dots using time correlated single photon countin
IEC TS 62844:2016 Guidelines for quality and risk assessment for nano-enabled electrotechnical products
IEC TS 62607-9-1:2021 Nanomanufacturing - Key control characteristics - Part 9-1: Traceable spatially resolved nano-scale stray magnetic field measurements - Magnetic force microscopy
IEC TS 62607-8-3:2023 Nanomanufacturing - Key control characteristics - Part 8-3: Nano-enabled metal-oxide interfacial devices - Analog resistance change and resistance fluctuation: Electrical resistance measurement

GSO, Nano and Molecular Weight

GSO ISO/TS 80004-12:2021 Nanotechnologies — Vocabulary — Part 12: Quantum phenomena in nanotechnology
BH GSO ISO/TS 80004-12:2022 Nanotechnologies — Vocabulary — Part 12: Quantum phenomena in nanotechnology
BH GSO IEC TS 62607-3-2:2022 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
GSO IEC TS 62607-3-2:2021 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
GSO IEC 62607-3-1:2017 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency
GSO ISO/TS 80004-11:2021 Nanotechnologies — Vocabulary — Part 11: Nanolayer, nanocoating, nanofilm, and related terms
BH GSO ISO/TS 80004-11:2022 Nanotechnologies — Vocabulary — Part 11: Nanolayer, nanocoating, nanofilm, and related terms
GSO ISO/TS 17200:2015 Nanotechnology -- Nanoparticles in powder form -- Characteristics and measurements
BH GSO ISO/TS 17200:2017 Nanotechnology -- Nanoparticles in powder form -- Characteristics and measurements
OS GSO ISO/TS 17200:2015 Nanotechnology -- Nanoparticles in powder form -- Characteristics and measurements
GSO IEC/TS 62607-5-1:2017 Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements
OS GSO IEC/TS 62607-5-1:2017 Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements
BH GSO ISO/TR 11360:2016 Nanotechnologies -- Methodology for the classification and categorization of nanomaterials
GSO ISO/TS 11931:2017 Nanotechnologies -- Nanoscale calcium carbonate in powder form -- Characteristics and measurement
GSO IEC/TS 62607-4-3:2017 Nanomanufacturing - Key control characteristics - Part 4-3: Nano-enabled electrical energy storage - Contact and coating resistivity measurements for nanomaterials
OS GSO IEC/TS 62607-4-3:2017 Nanomanufacturing - Key control characteristics - Part 4-3: Nano-enabled electrical energy storage - Contact and coating resistivity measurements for nanomaterials
GSO IEC TS 80004-9:2021 Nanotechnologies - Vocabulary - Part 9: Nano-enabled electrotechnical products and systems
GSO IEC TS 62607-4-2:2021 Nanomanufacturing - Key control characteristics - Part 4-2: Nano-enabled electrical energy storage - Physical characterization of cathode nanomaterials, density measurement
GSO ISO/TR 11360:2013 Nanotechnologies -- Methodology for the classification and categorization of nanomaterials
GSO ISO/TR 16196:2021 Nanotechnologies — Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials
BH GSO ISO/TR 16196:2022 Nanotechnologies — Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials
GSO IEC/TS 62844:2017 Guidelines for quality and risk assessment for nano-enabled electrotechnical products
OS GSO IEC/TS 62844:2017 Guidelines for quality and risk assessment for nano-enabled electrotechnical products
GSO ISO/TS 19590:2021 Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
GSO ISO/TS 12901-1:2017 Nanotechnologies -- Occupational risk management applied to engineered nanomaterials -- Part 1: Principles and approaches
OS GSO ISO/TS 12901-1:2017 Nanotechnologies -- Occupational risk management applied to engineered nanomaterials -- Part 1: Principles and approaches
GSO IEC/TS 62622:2013 Artificial gratings used in nanotechnology -- Description and measurement of dimensional quality parameters

未注明发布机构, Nano and Molecular Weight

DIN CEN ISO/TS 80004-12:2017*DIN SPEC 52400-12:2017 Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology
DIN EN ISO 17200 E:2019-07 Nanoparticle Characterization and Measurement in Nanotechnology Powder Forms (Draft)
DIN IEC/TS 62607-5-1:2016*DIN SPEC 42607-5-1:2016 Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements
DIN IEC/TS 62607-4-3:2018*DIN SPEC 42607-4-3:2018 Nanomanufacturing - Key control characteristics - Part 4-3: Nano-enabled electrical energy storage - Contact and coating resistivity measurements for nanomaterials
PD ISO/TS 22298:2024 Nanotechnologies — Silica nanomaterials — Specification of characteristics and measurement methods for silica with ordered nanopore array (SONA)
DIN IEC/TS 62607-4-2:2019*DIN SPEC 42607-4-2:2019 Nanomanufacturing - Key control characteristics - Part 4-2: Nano-enabled electrical energy storage - Physical characterization of cathode nanomaterials, density measurement
DIN EN ISO 21363 E:2021-09 Nanotechnology Measurement of Particle Size and Shape Distribution by Transmission Electron Microscopy (Draft)
DIN EN ISO 21363:2022 Nanotechnologies – measurements of particle size and particle shape distributions using transmission electron microscopy
DIN CEN ISO/TS 19590:2019*DIN SPEC 19286:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
ASTM RR-E56-1001 2009 E2490-Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
DIN IEC/TS 62622:2014*DIN SPEC 42622:2014 Nanotechnologies - Description, measurement and dimensional quality parameters of artificial gratings
DIN IEC/TS 62607-4-1:2018*DIN SPEC 42607-4-1:2018 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method
DIN IEC/TS 62607-4-1:2014*DIN SPEC 42607-4-1:2014 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Nano and Molecular Weight

GB/T 33714-2017 Nanotechnology—Test method for size of nanoparticles—Atomic force microscopy
GB/T 36081-2018 Nanotechnology—Characterization of CdSe quantum dot nanocrystal—Fluorescence spectroscopy
GB/T 34916-2017 Nanotechnologies—Multi-walled carbon nanotubes—Determination of amorphous carbon content by thermogravimetric analysis
GB/T 36065-2018 Nanotechnologies—Analysis of amorphous carbon, ash and volatile of carbon nanotubes—Thermogravimetry
GB/T 36084-2018 Nanotechnology—Determination of copper, manganese and chromium ions in aqueous solution—Ultraviolet-visible spectrophotometry

国家市场监督管理总局、中国国家标准化管理委员会, Nano and Molecular Weight

GB/T 37664.1-2019 Nanomanufacturing—Key control characteristics—Luminescent nanomaterials—Part 1:Quantum efficiency
GB/T 40066-2021 Nanotechnologies—Thickness measurement of graphene oxide—Atomic Force Microscopy (AFM)
GB/T 41068-2021 Nanotechnologies—Determination of water-soluble anions content in graphene powder—Ion chromatography method
GB/T 38261-2019 Nanotechnology—Determination of silver contents in biological samples—Inductively coupled plasma mass spectrometry

GOSTR, Nano and Molecular Weight

GOST R 58039-2017 Nanotechnologies. Part 11. Nanolayer, nanocoating, nanofilm. Terms and definitions
GOST R 57257-2016 Nanotechnologies. Part 12. Quantum phenomena. Terms and definitions
GOST ISO/TS 80004-2-2017 Nanotechnologies. Part 2. Nano-objects. Terms and definitions
PNST 508-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by scanning electron microscopy and energy dispersive X-ray spectrometry
GOST R 57103-2016 Specialized food products. Methods of sampling, detection and determination of nanoparticles and nanomaterials in the composition of agricultural and food products
GOST ISO/TS 80004-4-2016 Nanotechnologies. Part 4. Nanostructured materials. Terms and definitions
GOST ISO/TS 80004-8-2016 Nanotechnologies. Part 8. Nanomanufacturing processes. Terms and definitions
PNST 507-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by using transmission electron microscopy and energy dispersive X-ray spectrometry
GOST R 58038-2017 Nanotechnologies. Part 9. Nano-enabled electrotechnical products and systems. Terms and definitions
GOST ISO/TS 80004-6-2016 Nanotechnologies. Part 6. Сharacteristics of nano-objects and methods for determination. Terms and definitions

Professional Standard - Textile, Nano and Molecular Weight

FZ/T 54056-2012 Ultra-high molecular weight polyethylene (UHMWPE) /nano-carbon tube filament yarns

European Committee for Electrotechnical Standardization（CENELEC）, Nano and Molecular Weight

EN 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency

KR-KS, Nano and Molecular Weight

KS C IEC 62607-3-1-2018 Nanomanufacturing — Key control characteristics — Part 3-1: Luminescent nanomaterials — Quantum efficiency
KS C IEC 62607-3-1-2018(2023) Nanomanufacturing — Key control characteristics — Part 3-1: Luminescent nanomaterials — Quantum efficiency
KS C IEC TS 62607-5-1-2019 Nanomanufacturing — Key control characteristics — Part 5-1: Thin-film organic/nano electronic devices — Carrier transport measurements
KS C IEC TS 62607-4-3-2023 Nanomanufacturing — Key control characteristics — Part 4-3: Nano-enabled electrical energy storage — Contact and coating resistivity measurements for nanomaterials
KS C IEC TS 62607-4-2-2021 Nanomaunfacturing — Key control characteristics — Part 4-2: Nano-enabled electrical energy storage — Physical characterization of cathode nanomaterials, density measurement
KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
KS C ISO 19749-2023 Nanotechnologies — Measurements of particle size and shape distributions by scanning electron microscopy
KS C ISO 21363-2023 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy
KS C IEC TS 62607-4-5-2019 Nanomanufacturing — Key control characteristics — Part 4-5:Cathode nanomaterials for nano-enabled electrical energy storage — Electrochemical characterization, 3-electrode cell method
KS C ISO TS 18827-2021 Nanotechnologies — Electron spin resonance(ESR) as a method for measuring reactive oxygen species(ROS) generated by metal oxide nanomaterials
KS C ISO TS 21412-2023 Nanotechnologies — Nano-object-assembled layers for electrochemical bio-sensing applications — Specification of characteristics and measurement methods
KS D 2711-2008(2023) Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
KS C IEC TS 62622-2023 Nanotechnologies — Description, measurement and dimensional quality parameters of artificial gratings

ES-UNE, Nano and Molecular Weight

UNE-EN 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency (Endorsed by AENOR in December of 2014.)
UNE-CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017) (Endorsed by Asociación Española de Normalización in October of 2020.)
UNE-EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020) (Endorsed by Asociación Española de Normalización in November of 2020.)
UNE-CEN ISO/TS 19807-1:2022 Nanotechnologies - Magnetic nanomaterials - Part 1: Specification of characteristics and measurements for magnetic nanosuspensions (ISO/TS 19807-1:2019) (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-CEN ISO/TS 19807-2:2023 Nanotechnologies - Magnetic nanomaterials - Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction (ISO/TS 19807-2:2021) (Endorsed by Asociación Española de Normalización in May...
UNE-CEN ISO/TS 23302:2022 Nanotechnologies - Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them (ISO/TS 23302:2021) (Endorsed by Asociación Española de Normalización in November of 2022.)
UNE-EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020) (Endorsed by Asociación Española de Normalización in February of 2022.)
UNE-EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021) (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE-CEN ISO/TS 21362:2021 Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation (ISO/TS 21362:2018) (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN ISO 638-2:2022 Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials (ISO 638-2:2022)

IEC - International Electrotechnical Commission, Nano and Molecular Weight

TS 62607-3-2-2017 Nanomanufacturing – Key control characteristics – Part 3-2: Luminescent nanoparticles – Determination of mass of quantum dot dispersion (Edition 1.0)
TS 62607-4-3-2015 Nanomanufacturing – Key control characteristics – Part 4-3: Nano-enabled electrical energy storage – Contact and coating resistivity measurements for nanomaterials (Edition 1.0)
TS 80004-9-2017 Nanotechnologies – Vocabulary – Part 9: Nano-enabled electrotechnical products and systems (Edition 1.0)
TS 62607-4-2-2016 Nanomanufacturing – Key control characteristics – Part 4-2: Nano-enabled electrical energy storage – Physical characterization of cathode nanomaterials@ density measurement (Edition 1.0)
TS 62607-4-6-2018 Nanomanufacturing – Key control characteristics – Part 4-6: Nano-enabled electrical energy storage – Determination of carbon content for nano-enabled electrode materials@ infrared absorption method (Edition 1.0)
TS 62844-2016 Guidelines for quality and risk assessment for nano-enabled electrotechnical products (Edition 1.0)
TS 62607-4-1-2014 Nanomanufacturing – Key control characteristics – Part 4-1 Cathode nanomaterials for lithium ion batteries – Electrochemical characterisation@ 2-electrode cell method (Edition 1.0)

Group Standards of the People's Republic of China, Nano and Molecular Weight

T/5115YBAPS 008-2019 Molecularly self-reinforced nanoalloy PVC pipes(SAPP)
T/SHXCL 000002-2019 Waterborne nanoscale narrow-band polymerized acrylic resin
T/CAS 472-2021 Plasma nano-dispersion technology and gas-phase dispersion evaluation
T/5115YBAPS 009-2019 Specification for installation and acceptance of molecularly self-reinforced nanoalloy PVC pipes(SAPP)
T/SCGS 313004-2023 Specification for image quality inspection and evaluation of magnetic nanoparticle imaging equipment
T/CEEIA 569-2022 Nanoparticle modified unsaturated polyester moulding compound for electrical purposes

PH-BPS, Nano and Molecular Weight

PNS IEC/TS 62607-3-2:2021 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
PNS ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
PNS ISO/TS 19808:2021 Nanotechnologies - Carbon nanotube suspensions - Specification of characteristics and measurement methods
PNS ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
PNS ISO 19007:2021 Nanotechnologies - In vitro MTS assay for measuring the cytotoxic effect of nanoparticles
PNS ISO/TS 18827:2021 Nanotechnologies - Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
PNS ISO/TS 21237:2021 Nanotechnologies - Air filter media containing polymeric nanofibres - Specification of characteristics and measurement methods
PNS ISO/TS 21412:2021 Nanotechnologies - Nano-object-assembled layers for electrochemical bio-sensing applications - Specification of characteristics and measurement methods

IT-UNI, Nano and Molecular Weight

UNI CEN ISO/TS 80004-11:2021 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms
UNI EN ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
UNI CEN ISO/TS 21362:2021 Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation
UNI EN ISO 638-2:2021 Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials

American Society for Testing and Materials (ASTM), Nano and Molecular Weight

ASTM E2834-12(2018) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12(2022) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2859-11(2017) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
ASTM E285-08(2015) Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
ASTM E2859-11(2023) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
ASTM E2524-22 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM E2524-08(2013) Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM D8526-23 Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient

Guangdong Provincial Standard of the People's Republic of China, Nano and Molecular Weight

DB44/T 1654-2015 Nanotechnology - Characterization and Measurement of Powdered Nanoparticles

AT-ON, Nano and Molecular Weight

ONR CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017)
OENORM EN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
ONR CEN ISO/TS 21362:2021 Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation (ISO/TS 21362:2018)

PL-PKN, Nano and Molecular Weight

PN-EN ISO 17200-2021-03 E Nanotechnology -- Nanoparticles in powder form -- Characteristics and measurements (ISO 17200:2020)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Nano and Molecular Weight

IEEE 1906.1-2015 Recommended Practice for Nanoscale and Molecular Communication Framework

Institute of Electrical and Electronics Engineers (IEEE), Nano and Molecular Weight

IEEE Std 1906.1-2015 IEEE Recommended Practice for Nanoscale and Molecular Communication Framework
IEEE P1906.1/D1.1, October 2014 IEEE Draft Recommended Practice for Nanoscale and Molecular Communication Framework
IEEE P1906.1/D2.0, October 2014 IEEE Draft Recommended Practice for Nanoscale and Molecular Communication Framework
IEEE P1906.1/D2.1, October 2015 IEEE Approved Draft Recommended Practice for Nanoscale and Molecular Communication Framework

Professional Standard - Medicine, Nano and Molecular Weight

YY/T 1863-2023 Biological evaluation of nanomedical devices Release and characterization methods of nanosilver particles and silver ions in nanosilver-containing dressings

GOST, Nano and Molecular Weight

GOST R 55721-2013 Nanotechnology. Part 5. Nano-/bio-interface Terms and definitions
GOST R 55720-2013 Nanotechnology. Part 7. Nanotechnology in medicine. Terms and Definitions

CU-NC, Nano and Molecular Weight

NC 40-94-1986 Textiles. Polyester-Viscous Dyed Yarn, 14,7 tex (Nm 68/1) and 14,7 tex x 2 (Nm 68/2). Quality Specifications