ZH
RU
ES

Equipment for biosafety laboratories

Equipment for biosafety laboratories, Total:500 items.

In the international standard classification, Equipment for biosafety laboratories involves: Laboratory medicine, Quality, Medical sciences and health care facilities in general, Occupational safety. Industrial hygiene, Buildings, Pesticides and other agrochemicals, Veterinary medicine, Microbiology, Structures of buildings, Education, Electrical and electronic testing, Medical equipment, Sterilization and disinfection, Equipment for the chemical industry, Construction industry, Analytical chemistry, Biology. Botany. Zoology, Measurement of volume, mass, density, viscosity, Rectifiers. Convertors. Stabilized power supply, Farming and forestry, Telecommunication services. Applications, Acoustics and acoustic measurements, Resistors, HEALTH CARE TECHNOLOGY, Safety of machinery, Metrology and measurement in general, Test conditions and procedures in general, Industrial automation systems, Thermodynamics and temperature measurements, Protection against crime, Electricity. Magnetism. Electrical and magnetic measurements, Electrical engineering in general, Air quality, Applications of information technology, Protection against electric shock, Agricultural machines, implements and equipment, Radiation measurements, Electromagnetic compatibility (EMC), Power transmission and distribution networks, Extraction and processing of petroleum and natural gas.

Group Standards of the People's Republic of China, Equipment for biosafety laboratories

T/ZS 0402-2022 Biosafety Record specification for pathogenic microbiology laboratory
T/SHMHZQ 055-2021 Code for design of air tightness in biosafety laboratories
T/HBYY 0004-2021 Vehicle biosafety laboratory for nucleic acid detection
T/NAHIEM 74-2023 "Technical Standards for the Construction of Enhanced Biosafety Level 2 Laboratory"
T/NAHIEM 84-2023 Technical standards for assembled biosafety laboratories
T/QGCML 706-2023 Specifications for the management of biological laboratory instruments and equipment
T/SAME 001-2022 Management requirements for level II biosafety cabinets in clinical laboratories
T/CECS 662-2020 Technical standards for construction of medical biosafety secondary laboratories
T/CCSA 364-2022 Requirements for security baseline verification of high-level biological laboratory
T/CCSA 365-2022 Guidelines for network security vulnerabilities detection of high-level biological laboratory
T/ZS 0300-2022 B i osafety management spec i f i cat i on for sars-cov-2 nuc l e i c ac i d detect i on l aboratory of POCT methods

Professional Standard - Certification and Accreditation, Equipment for biosafety laboratories

RB/T 199-2015 Technical code for evaluating biosafety performance of laboratory equipment

未注明发布机构, Equipment for biosafety laboratories

AS/NZS 2243.3:2010

Underwriters Laboratories (UL), Equipment for biosafety laboratories

UL 1262 BULLETIN-2003 UL Standard for Safety Laboratory Equipment
UL 1262 BULLETIN-2002 UL Standard for Safety Laboratory Equipment
UL 61010A-2-010 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials
UL 61010A-2-051 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for Mixing and Stirring
UL 61010A-2-010-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials (First Edition)
UL 61010A-2-020 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Centrifuges
UL 61010A-2-020 BULLETIN-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Centrifuges
UL 61010A-2-051-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for Mixing and Stirring (First Edition)
UL 61010-2-051 BULLETIN-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring
UL 61010-2-010-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Third Edition)
UL 61010-2-051-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring (Third Edition)
UL 61010-2-051-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring (Fourth Edition)
UL 61010-2-010-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Fourth Edition)
UL 3101-1 BULLETIN-2001 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 1: General Requirements
UL 3101-1 BULLETIN-2000 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 1: General Requirements
UL 61010A-1 BULLETIN-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 1: General Requirements
UL 61010-2-201-2014 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
UL 61010A-2-061 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization
UL 61010-1-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
UL 61010-1-2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
UL 61010A-2-041 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials and for Laboratory Processes
UL 61010A-2-061-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization (First Edition)
UL 61010-2-010 BULLETIN-2014 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (COMMENTS DUE: DECEMBER 22@ 2014)
UL 61010-2-010 BULLETIN-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (COMMENTS DUE: MAY 13@ 2019)
UL 61010-2-051 BULLETIN-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring (COMMENTS DUE: MAY 20@ 2019)
UL 61010-2-081-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-081: Particular Requirements for Automatic and Semi-Automatic Laboratory Equipment for Analysis and Other Purposes (Second Edition)
UL 61010-031-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
UL 61010-1 BULLETIN-2012 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements
UL 61010-1 BULLETIN-2005 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements
UL 61010-1 BULLETIN-2010 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements

Professional Standard - Hygiene , Equipment for biosafety laboratories

WS 589-2018 Pathogenic microbiology laboratory biosafety sign
WS/T 442-2014 Guideline for clinical laboratory biosafety
WS 233-2002 General biosafety standard for microbiological and biomedical laboratories

国家卫生计生委, Equipment for biosafety laboratories

WS/T 589-2018 Pathogenic Microbiology Laboratory Biosafety Labeling

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Equipment for biosafety laboratories

GB 19489-2004 Laboratories-General requirements for biosafety
GB 19489-2008 Laboratories.General requirements for biosafety
GB/T 27428-2022 General requirements for plant biosafety laboratory
GB 27421-2015 Mobile laboratories.General requirements for biosafety
GB 27421-2015(英文版) Mobile laboratories—General requirements for biosafety
GB 50346-2004 Architectural and technical code for biosafety laboratories
GB 50346-2011 Architectural and technical code for biosafety laboratories
GB/T 21747-2008 Educational laboratory equipment.Safety requirements and test methods for laboratory workbenches
GB 4793.6-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for the heating of materials
GB 4793.3-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for mixing and stirring
GB/T 32708-2016 Safety requirements for laboratory instrument and equipment.Autoclave
GB 4793.7-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for alboratory centrifuges
GB/T 32704-2016 Safety requirements for laboratory instrument and equipment.Balance instrument
GB/T 32705-2016 Safety requirements for laboratory instrument and equipment—Power supply for instrument and equipment
GB 4793.6-2008 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 6: Particular requirements for laboratory material heating equipment
GB 4793.3-2008 Safety requirements for electrical equipment for measurement,control,and laboratory use.Part3:Particular requirements for laboratory equipment for mixing and stirring
GB/T 32706-2016 Safety requirements for laboratory instruments and equipments—Noise measuring instruments
GB/T 32707-2016 Safety requirements for laboratory instruments and equipments.Oxygen bomb calorimeter
GB/T 32709-2016 Safety requirements for laboratory instruments and equipments.Industry analysis instrument
GB 4793.7-2008 Safety requirements for electrical equipment for measurement,control,and labortory use.Part 7:Particular requirements for laboratory centrifuges
GB 4793.4-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory process
GB/T 42125.14-2023 Safety requirements for electrical equipment for measurement, control and laboratory use—Part 14:Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other pu
GB 4793.9-2013 Safety requirements for electrical equipment for measurement, control and laboratory use.Part 9:Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
GB 4793.1-2007 Safety requirements for electrical equipment for measurement,control,and laboratory use.Part 1:General requirements
GB/Z 30993-2014 Safety requirements for electrical equipment for measurement, control and laboratory use.Conformity verification report for GB 4793.1—2007
GB 4793.5-2008 Safety requirements for electrical equipment for measurement,control,and laboratory use-Part 5:Safety requirements for hand-held probe assemblies for electrical measurement and test
GB4793.5-2008 Safety requirements for electrical equipment for measurement,control,and laboratory use-Part 5:Safety requirements for hand-held probe assemblies for electrical measurement and test
GB 4793.5-2008 Safety requirements for electrical equipment for measurement,control,and laboratory use-Part 5:Safety requirements for hand-held probe assemblies for electrical measurement and test
GB/Z 30249-2013 Safety requirements for electrical equipment for measurement,control, and laboratory use.Protocol for the preparation of conformity verfication reports for the GB 4793 series
GB 4793.5-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for hand-held probe assemblies for electrical measurement and test

Professional Standard - Agriculture, Equipment for biosafety laboratories

第1．1．3章OIE陆生动物诊断试验和疫苗手册-第七版 General standard - Introduction - Biosafety and biosecurity for veterinary microbiology laboratories and animal facilities
NY/T 1948-2010 General biosafety standard for veterinary laboratory
CNAS-CL05-A002-2020 Notes on the application of laboratory biosafety accreditation criteria to the evaluation of key protective equipment
CNAS-GL045-2020 Pathogenic Microbiology Laboratory Biosafety Risk Management Guidelines
农业农村部公告第111号-17-2018 Good Laboratory Practice for Genetically Modified Organisms Part 2: Environmental Safety Testing

中华人民共和国国家卫生和计划生育委员会, Equipment for biosafety laboratories

WS 233-2017 General guidelines for biosafety in pathogenic microbiology laboratories

Zhejiang Provincial Standard of the People's Republic of China, Equipment for biosafety laboratories

DB33/T 2540-2022 Biosafety Laboratory Management Evaluation Specification
DB33/T 2281-2020 Biosafety specifications for pathogen testing laboratories for severe respiratory infectious diseases in medical institutions

Standard Association of Australia （SAA）, Equipment for biosafety laboratories

AS/NZS 2243.3:2022 Safety in laboratories, Part 3: Microbiological safety and containment
AS 1807.0:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - List of methods and apparatus
AS 4125.1:2009
AS 1807.10:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of air pressure of cleanrooms and pharmaceutical isolators
AS 1807.21:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of inward air velocity of Class I biological safety cabinets
AS 1807.17:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of vibration in cleanrooms
AS 1807.16:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of sound level in cleanrooms
AS 1807.20:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of sound level at installed workstations, safety cabinets and pharmaceutical isolators
AS 1807.24:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of recovery times of cleanrooms
AS 61010.031:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2002 MOD)
AS 1807.13:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of relative humidity in cleanrooms
AS 1807.3:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of air velocity in laminar flow cleanrooms

Professional Standard - Commodity Inspection, Equipment for biosafety laboratories

SN/T 2025-2007 Operating procedures for biosafety of animal quarantine laboratories
SN/T 2025-2016 Code of Practice for Biosafety in Animal Quarantine Laboratories
SN/T 3689-2013 Biosafety operating rules in the laboratory of plant quarantine pests
SN/T 3902-2014 General requirements for biosafety level Ⅱ laboratories of inspection and quarantine
SN/T 2024-2007 Requirements for biosafety levels for entry and exit animal quarantine laboratories
SN/T 1862-2007 Standard of biosafety for pathogens test in medical vector laboratory entry-exit ports
SN/T 1834-2006 Operation standard of biological safety for disease surveillance laboratory at entry-exit port

CN-STDBOOK, Equipment for biosafety laboratories

图书 A-5052 Guidelines for the Construction and Operation Management of Biosafety Level 2 Laboratories
图书 3-9749 Pathogenic Microbiology Laboratory Biosafety Risk Management Manual

German Institute for Standardization, Equipment for biosafety laboratories

DIN 58956-10:1986 Medical microbiology; medical-microbiological laboratories; safety marking
DIN 58956-10:1986-01 Medical microbiology; medical-microbiological laboratories; safety marking
DIN 58956-2:1986-01 Medical microbiology; medical microbiological laboratories; requirements for equipment
DIN 58956-2:1986 Medical microbiology; medical microbiological laboratories; requirements for equipment
DIN EN 12128:1998-05 Biotechnology - Laboratories for research, development and analysis - Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements; German version EN 12128:1998
DIN VDE 0789-100:1984 Classrooms and laboratories fitments equipment and furniture safety specification for powered constructional units [VDE Specification]
DIN EN 12128:1998 Biotechnology - Laboratories for research, development and analysis - Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements; German version EN 12128:1998
DIN EN 61010-2-010:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials (IEC 61010-2-010:2003); German version EN 61010-2-010:2003
DIN EN 61010-2-051:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2003); German version EN 61010-2-051:2003
DIN EN 61010-2-081:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001 + A1:2003); German v
DIN EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials (IEC 61010-2-010:2014); German version EN 61010-2-010:2014
DIN EN 61010-2-051:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2015); German version EN 61010-2-051:2015
DIN EN 61010-031:2008 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2002 + A1:2008); German version EN 61010-031:2002 +
DIN EN 61326-3-1:2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applic
DIN VDE 0100-723:2005 Erection of low-voltage installations - Requirements for special installations or locations - Part 723: Class-rooms with experimental equipment
DIN 12980:2017 Laboratory installations - Safety cabinets and glove boxes for cytotoxic substances and other CMR drugs
DIN 12980:2016 Laboratory installations - Safety cabinets and glove boxes for cytotoxic substances and other CMR drugs
DIN EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006); German version EN 61010-2-020:2006
DIN EN 61010-2-101:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment (IEC 61010-2-101:2002, modified); German version EN 61010-2-101:2002

国家市场监督管理总局, Equipment for biosafety laboratories

RB/T 040-2020 Guidelines for biosafety risk management in pathogenic microbiology laboratories

Sichuan Provincial Standard of the People's Republic of China, Equipment for biosafety laboratories

DB51/T 2168-2016 Guidelines for the Safety Management of Microbiological Testing Laboratories

British Standards Institution (BSI), Equipment for biosafety laboratories

BS CWA 16393:2012 Laboratory biorisk management. Guidelines for the implementation of CWA 15793:2008
BS EN 61010-2-101:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for in vitro diagnostic (IVD) medical equipment
BS EN IEC 61010-2-051:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
BS EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
BS EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of Materials
BS EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of material
BS EN 12128:1998 Biotechnology. Laboratories for research, development and analysis. Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements
BS EN 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
PD 6632:1998 Biotechnology. Laboratories for research, development and analysis. Guidance on the selection of equipment needed for biotechnology laboratories according to the degree of hazard
BS EN 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for laboratory centrifuges
BS EN IEC 61010-2-101:2022+A11:2022 Safety requirements for electrical equipment for measurement, control, and laboratory use - Safety requirements for in vitro diagnostic (IVD) medical equipment
BS EN IEC 61010-2-120:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular safety requirements for machinery aspects of equipment
BS EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for control equipment
BS EN IEC 61010-2-011:2021+A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for refrigerating equipment
BS EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
BS EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
BS EN 61010-2-020:2017 Tracked Changes. Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for laboratory centrifuges
BS EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for refrigerating equipment
20/30419178 DC BS EN 61010-2-051 AMD1. Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
BS EN 61010-2-010:1993 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
BS IEC 61010-3-051:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
BS EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
BS EN 61010-1:1993 Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements
BS EN IEC 61010-2-061:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
BS IEC 61010-3-010:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
BS EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements
BS EN 61010-1:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - General requirements
BS EN ISO 19001:2013 In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
BS EN IEC 61010-2-201:2018 Tracked Changes. Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for control equipment
18/30370360 DC BS EN 61010-2-120. Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-120. Particular safety requirements for machinery aspects of equipment
BS IEC 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges
20/30387385 DC BS EN IEC 61010-2-020. Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for climatic and environmental testing and other temperature conditioning equipment
BS EN IEC 61010-2-030:2021+A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for equipment having testing or measuring circuits
BS EN 61010-1:2010+A1:2019 Tracked Changes. Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements
21/30438910 DC BS EN 61010-2-101. Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-101. Safety requirements for in vitro diagnostic (IVD) medical equipment
BS EN IEC 61010-2-034:2021+A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength
BS EN IEC 61010-2-012:2022+A11:2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for climatic and environmental testing and other temperature conditioning equipment
BS EN 61010-031:2002+A1:2008 Safety requirements for electrical equipment for measurement, control and laboratory use - Safety requirements for hand-held probe assemblies for electrical measurement and test
BS EN 61010-031:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Safety requirements for hand-held probe assemblies for electrical measurement and test
BS EN 61010-031:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Safety requirements for hand-held probe assemblies for electrical measurement and test
BS EN 61010-2-045:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields
BS EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
BS EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
BS EN 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
PD IEC/TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children
PD ISO/TS 5594:2022 Soil and water quality. Guidance document on designing an interlaboratory trial for validation of biotests
BS EN IEC 61010-2-091:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for cabinet X-ray systems
PD IEC TR 61010-3-041:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-041:1995. Particular requirements for autoclaves using steam for the treatment of medical materials, and for laborato
19/30394199 DC BS EN 61010-2-201. Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201. Particular requirements for control equipment
BS EN 61010-2-101:2017 Tracked Changes. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for in vitro diagnostic (IVD) medical equipment
18/30363265 DC BS EN 61010-2-081. Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-081. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
BS EN 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for testing and measuring circuits
BS EN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for cabinet x-ray systems
BS EN IEC 61010-2-202:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for electrically operated valve actuators
BS EN IEC 61010-2-040:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for electrically operated valve actuators

国家认证认可监督管理委员会, Equipment for biosafety laboratories

RB/T 086-2022 Biosafety Laboratory Operation and Maintenance Evaluation Guide
RB/T 142-2018 Technical specifications for evaluation of mobile biosafety laboratories

AT-ON, Equipment for biosafety laboratories

ONORM N 1500-6-1996 Food microbiology - Food hygienic microbiological laboratories - Safety marking
ONORM N 1500-2-1996 Food microbiology - Food hygienic microbiological laboratories - Requirements for the equipment
ONORM N 1500-1-1996 Food microbiology - Food hygienic microbiological laboratories - Classification, areas ol risk, localities - Safety requirements and testing

Indonesia Standards, Equipment for biosafety laboratories

SNI ISO 19001:2009 In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology

European Committee for Standardization (CEN), Equipment for biosafety laboratories

EN ISO 19001:2013 In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
EN 12298:1998 Biotechnology - Equipment - Guidance on testing procedures for leaktightness
EN 60010-2-02:1994 Safety requirements for electrical equipment for measurement, control and laboratory use Part u320 Particular rqyirernents for laboratory centrifuges (includes amendment Al : 1996)
prEN 61010-1-1992 Safety requirements for electrical equipment for measurement, control and laboratory use; part 1: general requirements (IEC 1010-1:1990 + future A1, modified)

International Organization for Standardization (ISO), Equipment for biosafety laboratories

ISO 19001:2002 In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
ISO 19001:2013 In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology

Korean Agency for Technology and Standards (KATS), Equipment for biosafety laboratories

KS P ISO 19001:2010 In virto diagnostic medical devices－Information supplied by the manufacturer with in vitro gnostic reagents for staining in biology
KS C IEC 61010-2-051:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
KS C IEC 61010-2-10:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-10:Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-10:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-10: Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-010:2018 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-51:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-51:Particular requirements for laboratory equipment for mixing and stirring
KS C IEC 61010-2-51:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-51: Particular requirements for laboratory equipment for mixing and stirring
KS C IEC 61010-2-020:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges
KS C IEC 61010-2-41-2002(2018) Safety requipements for electrical equipment for measurement, control, and laboratory use－Part 2－41：Particular requirements for autoclaves using steam for the treatment of medicals, and for laboratory
KS C IEC 61010-2-20:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-20:Particular requirements for laboratory centrifuges
KS C IEC 61010-2-20:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges
KS C IEC 61010-1:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 1:General requirements
KS C IEC 61010-1:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
KS C IEC 61010-1:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
KS P ISO 10993-8:2002 Biological evaluation of medical devices－Part 8：Selection and qualification of reference materials for biological tests
KS P ISO 10993-8:2007 Biological evaluation of medical devices－Part 8：Selection and qualification of reference materials for biological tests

Jiangxi Provincial Standard of the People's Republic of China, Equipment for biosafety laboratories

DB36/T 1687-2022 Management specification for secondary biosafety laboratories in medical and health institutions

CEN - European Committee for Standardization, Equipment for biosafety laboratories

EN 12128:1998 Biotechnology - Laboratories for Research@ Development and Analysis - Containment Levels of Microbiology Laboratories@ Areas of Risk@ Localities and Physical Safety Requirements

Association Francaise de Normalisation, Equipment for biosafety laboratories

NF EN 12128:1998 Biotechnologie - Laboratoires de recherche, de développement et d'analyse - Niveaux de confinement des laboratoires de microbiologie, zones à risque, situations et exigences physiques de sécurité
FD X42-205*FD CR 12739:1999 Biotechnology. Laboratories for research, development and analysis. Report on the selection of equipment needed for biotechnology laboratories according to the degree of hazard.
FD CR 12739:1999 Biotechnologie - Laboratoires de recherche, développement et analyse - Rapport sur le choix des équipements nécessaires dans les laboratoires de biotechnologie en fonction du degré de danger.
NF C42-020-2-010*NF EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials
NF C42-720:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of material.
NF C42-020-2-010*NF EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials
NF C42-020-2-051/A11*NF EN IEC 61010-2-051/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
NF C42-020-2-051*NF EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
NF C42-020-2-051*NF EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
NF EN IEC 61010-2-010:2020 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-010 : exigences particulières pour appareils de laboratoire utilisés pour l'échauffement des matières
NF EN ISO 24998:2009 Matériel de laboratoire en matière plastique - Boîtes de Petri à usage unique pour méthodes microbiologiques
NF C42-722:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring.
NF EN IEC 61010-2-051:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-051 : exigences particulières pour appareils de laboratoire utilisés pour mélanger et agiter
NF EN IEC 61010-2-051/A11:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-051 : exigences particulières pour appareils de laboratoire utilisés pour mélanger et agiter
FD CEN/TR 17078:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 61010-2-020:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 12485:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 10028-6:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 10028-2:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 10028-4:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 1993-1-5/A1:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF X42-206*NF EN 12128:1998 Laboratories for research, development and analysis. Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements.
NF C42-721:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020 : particular requirements for laboratory centrifuges.
NF C42-020-2-020*NF EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020 : particular requirements for laboratory centrifuges
NF C42-020-2-120*NF EN IEC 61010-2-120:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120 : particular safety requirements for machinery aspects of equipment
NF EN IEC 61010-2-120:2018 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-120 : exigences de sécurité particulières pour les aspects des appareils relatifs aux machines
NF C42-736/A1:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes.
NF EN IEC 61010-2-011:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-011 : exigences particulières pour appareils de réfrigération
NF EN IEC 61010-2-011/A11:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-011 : exigences particulières pour appareils de réfrigération
NF EN IEC 61010-2-201:2018 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-201 : exigences particulières pour les équipements de commande
NF C42-020-2-081*NF EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
NF C42-020-2-081*NF EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
NF C42-020-2-011*NF EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011 : particular requirements for refrigerated equipment
NF C42-020-2-011*NF EN IEC 61010-2-011:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011 : particular requirements for refrigerating equipment
NF EN 61010-1/A1:2019 Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 1 : exigences générales
NF EN 61010-1:2011 Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 1 : exigences générales
NF EN IEC 61010-2-081:2020 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-081 : exigences particulières pour les appareils de laboratoire, automatiques et semi-automatiques, destinés à l'analyse et à d'autres us...
NF C42-020-2-201*NF EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201 : particular requirements for control equipment
NF C42-020-2-201*NF EN IEC 61010-2-201:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201 : particular requirements for control equipment
NF EN IEC 61010-2-061:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-061 : exigences particulières pour spectromètres atomiques de laboratoire avec vaporisation et ionisation thermiques
NF EN IEC 61010-2-061/A11:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-061 : exigences particulières pour spectromètres atomiques de laboratoire avec vaporisation et ionisation thermiques
NF EN 61010-2-012:2016 Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-012 : exigences particulières pour les appareils de conditionnement de température
NF C42-020-1*NF EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1 : general requirements
NF C42-020:1993 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1 : general requirements.
NF C42-020-1/A1*NF EN 61010-1/A1:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1 : general requirements
NF EN IEC 61010-2-091/A11:2021 Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-091 : exigences particulières pour les équipements à rayons X montés en armoire
NF EN IEC 61010-2-091:2021 Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-091 : exigences particulières pour les équipements à rayons X montés en armoire
NF C42-730:2006 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061 : particular requirements for laboratory atomic spectrometers with thermal atomization and ionization.
NF C42-020-2-061/A11*NF EN IEC 61010-2-061/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061 : particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
NF C42-020-2-061*NF EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061 : particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
NF EN IEC 61010-2-101/A11:2022 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-101 : Exigences particulières pour le matériel médical de diagnostic in vitro (DIV)
NF EN IEC 61010-2-101:2022 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-101 : exigences particulières pour le matériel médical de diagnostic in vitro (DIV)
NF C42-725/A1:2008 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031 : safety requirements for hand-held probe assemblies for electrical measurement and test.
NF C42-020-2-011/A11*NF EN IEC 61010-2-011/A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011 : particular requirements for refriger
NF C42-020-2-101*NF EN 61010-2-101:2017 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101 : particular requirements for in vitro diagnostic (IVD) medical equipment
NF EN IEC 61010-2-012/A11:2022 Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-012 : exigences particulières pour les appareils d'essais climatiques et d'environnement, et autres appareils de conditionnement de température
NF EN IEC 61010-2-012:2022 Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-012 : exigences particulières pour les appareils d'essais climatiques et d'environnement, et autres appareils de conditionnement de température
NF C42-020-2-061*NF EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061 : particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
NF EN IEC 61010-2-030:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-030 : exigences particulières pour les appareils équipés de circuits d'essai ou de mesure
NF EN IEC 61010-2-030/A11:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-030 : exigences particulières pour les appareils équipés de circuits d'essai ou de mesure

ISA - International Society of Automation, Equipment for biosafety laboratories

ISA 82.02.02-1996 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use
ISA 82.02.04-1996 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use
ISA 61010-1-2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT@ CONTROL@ AND LABORATORY USE - Part 1: General requirements (82.02.01)
ISA 61010-1-2012 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT@ CONTROL@ AND LABORATORY USE – Part 1: General requirements (82.02.01)

HU-MSZT, Equipment for biosafety laboratories

国家质量监督检验检疫总局, Equipment for biosafety laboratories

SN/T 2024-2017 Technical requirements for biosafety classification of entry-exit animal quarantine laboratories

Danish Standards Foundation, Equipment for biosafety laboratories

DS/CEN/CR 12739:1999 Biotechnology - Laboratories for research, development and analysis - Report on the selection of equipment needed for biotechnology laboratories according to the degree of hazard
DS/EN 12128:1998 Biotechnology - Laboratories for research, development and analysis - Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements
DS/EN 61010-2-010:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
DS/EN 61010-2-051:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
DS/EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
DS/EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
DS/IEC/TR 61010-3-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials
DS/IEC/TR 61010-3-081:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
DS/IEC/TR 61010-3-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, Particular requirements for laboratory equipment for mixing and stirring
DS/EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
DS/EN 61010-2-201/AC:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
DS/EN 61010-2-081/A1:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
DS/EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
DS/EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
DS/ISO 22856:2009 Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels
DS/IEC/TR 61010-3-020:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992, Particular requirements for laboratory centrifuges
DS/EN IEC 61010-2-130:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use – Particular requirements for equipment intended to be used in educational establishments by children
DS/EN IEC 61010-2-034:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength
DS/EN 61010-2-061:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

PT-IPQ, Equipment for biosafety laboratories

NP EN 12128-2000 Biotechnology. Laboratories for research,development and analysis Containment levels of microbiology laboratories,areas of risk,localities and physical safety requirements

Agricultural Standard of the People's Republic of China, Equipment for biosafety laboratories

农业部2406号公告-1-2016 General requirements for safety management of agricultural genetically modified organisms.Laboratory

Lithuanian Standards Office , Equipment for biosafety laboratories

LST EN 12128-2000 Biotechnology - Laboratories for research, development and analysis - Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements
LST EN 61010-2-010-2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials (IEC 61010-2-010:2014)
LST EN 61010-2-010-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010: Particular requirements for laboratory equipment for the heating of material (IEC 61010-2-010:2003)
LST EN 61010-2-051-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2003)
LST EN 61010-2-020-2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006)
LST EN 61010-2-081-2003 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001)
LST EN 61010-2-081-2003/A1-2003 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001)
LST EN 61010-2-081-2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2015)

AENOR, Equipment for biosafety laboratories

UNE-EN 12128:1998 Biotechnology - Laboratories for research, development and analysis - Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements
UNE-EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
UNE-CR 12739:2000 BIOTECHNOLOGY. LABORATOIRES FOR RESEARCH, DEVELOPMENT AND ANALYSIS. REPORT ON THE SELECTION OF EQUIPMENT NEEDED FOR BIOTECHNOLOGY LABORATORIES ACCORDING TO THE DEGREE OF HAZARD
UNE-EN 61010-2-051:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
UNE-EN 61010-2-081:2003 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
UNE-EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
UNE-EN 61010-2-081/A1:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
UNE-EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006)
UNE-EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
UNE-EN 61010-2-061:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
UNE-EN 61010-2-101:2004 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
UNE-EN 61010-031:2004/A1:2008 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
UNE-EN 61010-031:2004 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

European Committee for Electrotechnical Standardization（CENELEC）, Equipment for biosafety laboratories

EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
EN 61010-2-101:2017 Safety requirements for electrical equipment for measurement@ control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
EN 61010-2-020:2006 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges
EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement@ control@ and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
EN IEC 61010-2-101:2022/A11:2022 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Safety requirements for in vitro diagnostic (IVD) medical equipment
EN IEC 61010-2-101:2022 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Safety requirements for in vitro diagnostic (IVD) medical equipment
EN 61010-2-101:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
EN 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Remains Current)
EN IEC 61010-2-201:2018 Safety requirements for electrical equipment for measurement@ control@ and laboratory use - Part 2-201: Particular requirements for control equipment
prEN IEC 61010-2-201:2020 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
EN IEC 61010-2-011:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
EN 61010-1:1993 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 1: General Requirements (Incorporates Amendment A2: 1995; Remains Current)
EN 61010-1:2010/A1:2019/AC:2019-04 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes Safety requirements for electrical equipme
EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
EN IEC 61010-2-101:2022/prAB Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101 Particular requirements for in vitro diagnostic (IVD) medical equipment
EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
EN 61010-031:2015 Safety requirements for electrical equipment for measurement@ control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

CENELEC - European Committee for Electrotechnical Standardization, Equipment for biosafety laboratories

EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement@ control@ and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of material
EN 61010-2-051:1995 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use Part 2-051: Particular Requirements for Laboratory Equipment for Mechanical Mixing and Stirring
EN 61010-2-020:1994 Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges
EN IEC 61010-2-120:2018 Safety requirements for electrical equipment for measurement@ control@ and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment
EN 61010-2-010:1994 Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Incorporates Amendment A1: 1996)
EN 61010-1:2001 Safety requirements for electrical equipment for measurement@ control@ and laboratory use Part 1: General requirements (Incorporating Corrigendum June 2002)

KR-KS, Equipment for biosafety laboratories

KS C IEC 61010-2-051-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
KS C IEC 61010-2-010-2018(2023) Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-010-2018 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-020-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges
KS C IEC 61010-2-41-2002(2023) Safety requipements for electrical equipment for measurement, control, and laboratory use－Part 2－41：Particular requirements for autoclaves using steam for the treatment of medicals, and for laboratory
KS C IEC 61010-1-2018(2023) Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
KS C IEC 61010-1-2018 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
KS P ISO 10993-8-2002 Biological evaluation of medical devices－Part 8：Selection and qualification of reference materials for biological tests

CZ-CSN, Equipment for biosafety laboratories

CSN 66 8002-1965 Safety code for handling with explosives in laboratories
CSN 36 4901 Za-1987

海关总署, Equipment for biosafety laboratories

SN/T 5335-2020 Technical specifications for biosafety operations in African swine fever testing laboratories

International Electrotechnical Commission (IEC), Equipment for biosafety laboratories

IEC 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-101:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC 61010-2-101:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC 61010-2-101:2018 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-051:2018 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-010:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2019 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:1995 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-020:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-020:1992 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 2-020: particular requirements for laboratory centrifuges
IEC 61010-2-020:2016 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-010:1992 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 2-010: particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-120:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment
IEC 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-081:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-081:2001/AMD1:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and o
IEC 61010-2-081:2009 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-081:2001+AMD1:2003 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and o
IEC 61010-2-081:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and ot
IEC 61010-2-011:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
IEC 61010-2-011:2019 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
IEC 61010-2-201:2017 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
IEC 61010-2-011:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
IEC 61010-2-201:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
IEC 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
IEC 61010-1:2001 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 61010-1/COR1:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 61010-1/COR2:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 61010-1:1990 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 1: general requirements
IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 61010-2-081/AMD1:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes; Amendment 1
IEC 61010-2-081:2019 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and ot
IEC 61010-1:2010/COR1:2011 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 61010-1:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC TR3 61010-3-010:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
IEC TR 61010-3-101:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-101: Conformity verification report for IEC 61010-2-101:2002; Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC TR 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992 - Particular requirements for laboratory centrifuges
IEC 61010-2-061:2018 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionizati
IEC 61010-2-034:2023 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment f
IEC 61010-2-034:2023 EXV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment f
IEC 61010-2-130:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for equipment intended to be used in educational establishments by children
IEC TR3 61010-3-051:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-045:2000 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields
IEC 61010-2-041:1995 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
IEC 61010-2-101:2018 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC 61010-031:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
IEC 61010-031:2008 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
IEC 61010-031:2002+AMD1:2008 CSV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

TH-TISI, Equipment for biosafety laboratories

TIS 2002-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-010: particular requirements for laboratory equipment for the heating of materials
TIS 2009-2000 Safety requirement for electrical equipment for measurement, control and laboratory use.part 2: particular requirements for laboratory equipment for mixing and stirring
TIS 2003-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-020: particular requirements for laboratory centrifuges
TIS 2001-2000 Safety requirements for electrical equipment for measurement, control, and laboratory use.part 1: general requirements
TIS 2004-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 031: safety requirements for hand.held probe assemblies for electrical measurement and test

ZA-SANS, Equipment for biosafety laboratories

SANS 61010-2-010:2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials
SANS 61010-2-101:2003 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
SANS 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-020: Particular requirements for laboratory centrifuges
SANS 61010-1:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements
SANS 61010-2-081:2005 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
SANS 61010-2-031:1993 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test

RU-GOST R, Equipment for biosafety laboratories

GOST IEC 61010-2-010-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST IEC 61010-2-010-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST IEC 61010-2-051-2014 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
GOST IEC 61010-2-051-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
GOST IEC 61010-2-020-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
GOST IEC 61010-2-020-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
GOST R IEC 61010-2-010-1999 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST R IEC 61010-2-051-1999 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
GOST IEC 61010-2-081-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-081. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
GOST R IEC 61010-2-020-1999 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
GOST IEC 61010-031-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 031. Safety requirements for hand-held probe assemblies for electrical measurement and test
GOST 12.2.091-2012 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST 12.2.091-1994 Safetty requirements for indicating and recording electricalmeasuring instruments and their acessories
GOST IEC 61010-2-101-2013 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-101. Particular requirements for in vitro diagnostic (IVD) medical equipment
GOST IEC 61010-2-061-2014 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometer with thermal atomization and ionization

ES-UNE, Equipment for biosafety laboratories

UNE-EN IEC 61010-2-051:2021/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by AENOR in June of 2015.)
UNE-EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (Endorsed by Asociación Española de Normalización in June of 2017.)
UNE-EN IEC 61010-2-101:2023 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Safety requirements for in vitro diagnostic (IVD) medical equipment
UNE-EN IEC 61010-2-101:2023/A11:2023 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Safety requirements for in vitro diagnostic (IVD) medical equipment
UNE-EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (Endorsed by Asociación Española de N...
UNE-EN IEC 61010-2-201:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by AENOR in July of 2013.)
UNE-EN IEC 61010-2-011:2021/A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment (Endorsed by Asociación Española de Normalización in December of 2021.)
UNE-EN 61010-1:2011/A1:2020 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
UNE-EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Endorsed by Asociación Española de Normalizaci...
UNE-EN IEC 61010-2-061:2021/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Endorsed by Asociación Española de Normalizaci...
UNE-EN IEC 61010-2-011:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment (Endorsed by Asociación Española de Normalización in December of 2021.)
UNE-EN 61010-2-101:2018 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
UNE-EN 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial app...
UNE-EN IEC 61326-3-2:2018 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial application...

American Society for Testing and Materials (ASTM), Equipment for biosafety laboratories

ASTM D5245-92(2005) Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D5245-19 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D5245-92(1998) Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D5245-92(2012) Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM E829-16 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis

Professional Standard - Public Safety Standards, Equipment for biosafety laboratories

GA 1802.1-2022 Anti-terrorism prevention requirements in the field of biosecurity Part 1: High-level pathogenic microorganism laboratory

Xinjiang Provincial Standard of the People's Republic of China, Equipment for biosafety laboratories

DB65/T 4553-2022 Specifications for biosafety risk monitoring procedures for novel coronavirus etiology laboratories

AT-OVE/ON, Equipment for biosafety laboratories

OVE EN 61010-2-051/AA-2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Amendment) (english version)

Canadian Standards Association (CSA), Equipment for biosafety laboratories

CAN/CSA-C22.2 NO.61010-2-020-2009 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (Second Edition)
CSA C22.2 No.61010-2-020-09-CAN/CSA-2009 Safety requirements for electrical equipment for measurement, control, and laboratory use ?Part 2-020: Particular requirements for laboratory centrifuges Second Edition
CSA C22.2 No.61010-2-051-04-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring Second Edition
CSA C22.2 No.61010-2-010-04-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials Second Edition
CSA C22.2 No.61010-2-045-04-2004 R鑗les de s閏urit?pour appareils 閘ectriques de mesurage, de r間ulation et de laboratoire Partie 2-045: Prescriptions particuli鑢es pour appareils de d閟infection/lavage utilis閟 dans les domaines m閐ical, pharmaceutique, v閠閞inaire et en laboratoire
CSA C22.2 No.61010-2-081-01-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-081: Particular requirements for automatic and semiautomatic laboratory equipment for analysis and other purposes First Edition; IEC 61010-2-081:2001
CSA/CIE 61010-2-045-02:2004 R鑗les de s閏urit?pour appareils 閘ectriques de mesurage, de r間ulation et de laboratoire Partie 2-045: Prescriptions particuli鑢es pour appareils de d閟infection/lavage utilis閟 dans les domaines m閐ical, pharmaceutique, v閠閞inaire et en laboratoire
CAN/CSA-IEC 61010-2-201:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (First Edition)
CAN/CSA-C22.2 NO.61010-2-081-2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (Second Edition)
CSA C22.2 No.61010-2-081-04-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-081: Particular requirements for automatic and semiautomatic laboratory equipment for analysis and other purposes First Edition

CU-NC, Equipment for biosafety laboratories

NC 19-03-37-1986 Occupational Hygiene and Safety Standards System. Works with Chemical Substances in Laboratories. Safety General Requirements

UNKNOWN, Equipment for biosafety laboratories

农业农村部公告第323号-24-2020

IEC - International Electrotechnical Commission, Equipment for biosafety laboratories

IEC TR 61010-3-010:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-010: Conformity Verification Report for IEC 61010-2-010@ Particular Requirements for Laboratory Equipment for the Heating of Materials (Edition 1.0)
IEC TR 61010-3-051:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-051: Conformity Verification Report for IEC 61010-2-051@ Particular Requirements for Laboratory Equipment for Mixing and Stirring (Edition 1.0)

Japanese Industrial Standards Committee (JISC), Equipment for biosafety laboratories

JIS C 1010-2-201:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-201: Particular requirements for control equipment
JIS C 1010-2-201:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-201: Particular requirements for control equipment
JIS C 1010-1:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 1: General requirements
JIS C 1010-1:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use.Part 1: General requirements
JIS C 1010-1:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 1: General requirements
JIS C 1010-31:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 31: Safety requirements for hand-held probe assemblies for electrical measurement and test

BE-NBN, Equipment for biosafety laboratories

NBN-EN 61010-1-1994 Safety requirements for electrical equipment for measurement, control and laboratory use Part 1: General requirements

Instrument Society of America (ISA), Equipment for biosafety laboratories

ISA 82.02.01-2004 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use ?Part 1: General Requirements Approved 12 July 2004 ANSI/ISA?1010-1 (82.02.01) CSA C22.2 No. 1010.1 ANSI/UL 61010-1 AMERICAN NATIONAL STANDARD ISA The Instrumentati

PL-PKN, Equipment for biosafety laboratories

PN-EN 61010-1-2011/A1-2019-04 P Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 1: General requirements

GOSTR, Equipment for biosafety laboratories

GOST IEC 61010-1-2014 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
GOST R IEC 61010-2-034-2018 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-034. Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength
GOST IEC/TS 62850-2016 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children
GOST 12.2.091-2002 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

American National Standards Institute （ANSI), Equipment for biosafety laboratories

ANSI/ISA 61010-1(82.02.01)-2012 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General requirements

American Society of Mechanical Engineers (ASME), Equipment for biosafety laboratories

ASME SPPE-2b Addenda-1995 Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations; Addenda
ASME SPPE-2-1988 Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations
ASME SPPE-2-1982 Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations
ASME SPPE-2-1977 Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations