ZH
RU
ES
Gas instrument factory
Gas instrument factory, Total:499 items.
In the international standard classification, Gas instrument factory involves: Mining equipment, Analytical chemistry, Power stations in general, Water quality, Medical equipment, Metrology and measurement in general, Burners. Boilers, Road vehicle systems, Nuclear energy engineering, Environmental testing, Fluid storage devices, Alarm and warning systems, Measurement of fluid flow, Air quality, Fuels, Radiation measurements, Extraction and processing of petroleum and natural gas, Linear and angular measurements, Education, Occupational safety. Industrial hygiene, Equipment for the chemical industry, Industrial automation systems, Products of the chemical industry, Physical planning. Town planning, Electrical and electronic testing, Electrical engineering in general, Quality, Optics and optical measurements, Materials for aerospace construction, Equipment for petroleum and natural gas industries, Internal combustion engines, Inorganic chemicals, Insulating fluids, Radiation protection, Transformers. Reactors, Electronic tubes, Optoelectronics. Laser equipment, Electrical equipment for working in special conditions, Electromagnetic compatibility (EMC), Measurement of volume, mass, density, viscosity, Non-destructive testing, Installations in buildings, Protective equipment, Power transmission and distribution networks, Chipless working equipment, Insulating materials, Pipeline components and pipelines, Natural gas, Lamps and related equipment, Compressors and pneumatic machines, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Vocabularies, Farm buildings, structures and installations, Agricultural machines, implements and equipment, Gears, Law. Administration, Hydraulic energy engineering, Electricity. Magnetism. Electrical and magnetic measurements.
Japanese Industrial Standards Committee (JISC), Gas instrument factory
IN-BIS, Gas instrument factory
British Standards Institution (BSI), Gas instrument factory
- BS EN 61207-7:2014 Expression of performance of gas analyzers. Tuneable semiconductor laser gas analyzers
- ASME PTC 47-2020 Integrated Gasification Combined Cycle Power Generation Plants
- BS 6020-5:1982 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% gas
- BS IEC 60951-2:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air
- BS ISO 6338:2023 Method to calculate GHG emissions at LNG plant
- BS EN IEC 61207-3:2019 Tracked Changes. Gas Analyzers. Expression of performance. Paramagnetic oxygen analysers
- BS EN 61207-6:2015 Tracked Changes. Expression of performance of gas analyzers. Photometric analyzers
- 22/30456233 DC BS EN ISO 6338. Method to calculate GHG emissions at LNG plant
- BS EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Performance requirements for apparatus for the detection of combustible gases
- BS EN IEC 62465:2019 Nuclear power plants. Instrumentation and control important to safety. Management of ageing of electrical cabling systems
- BS EN IEC 61207-2:2019 Expression of performance of gas analyzers - Measuring oxygen in gas utilizing high-temperature electrochemical sensors
- 22/30400792 DC BS IEC 63261. Representation of electrical & instrument objects in digital 3D plant models during engineering
- BS EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- BS EN 61181:2007+A1:2012 Mineral oil-filled electrical equipment. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- BS EN IEC 60709:2019 Tracked Changes. Nuclear power plants. Instrumentation, control and electrical systems important to safety. Separation
- BS IEC/IEEE 62582-1:2011 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. General
- 17/30356584 DC BS EN 61577-2. Radiation protection instrumentation. Radon and radon dec ay product measuring instruments. Part 2. Specific requirements for <sup>222</sup>Rn and <sup>220</sup>Rn measuring instruments
- BS EN IEC/IEEE 62582-6:2021 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods - Insulation resistance
- BS ISO 17089-1:2010 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Meters for custody transfer and allocation measurement
- BS IEC/IEEE 62582-3:2012 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Elongation at break
- BS 6020-2:1981 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 5% methane in air
- BS 6020-4:1981 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% lower explosive limit
- BS 6020-1:1981 Instruments for the detection of combustible gases - Specification for general requirements and test methods
- BS 6020-3:1982 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 100% methane
- 22/30427567 DC BS ISO 23139. Biological equipment for treating air and other gases. Application guidance for deodorization in wastewater treatment plants
- BS ISO 23139:2023 Biological equipment for treating air and other gases. Requirements and application guidance for deodorization in wastewater treatment plants
- BS IEC/IEEE 62582-2:2022 Tracked Changes. Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Indenter measurements
- BS EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
- BS EN 13625:2002(2007) Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
Natural Gas Processor's Association (NGPA), Gas instrument factory
Professional Standard - Electricity, Gas instrument factory
- DL/T 1462-2015 Calibration code for power plant hydrogen system instrumentation
- DL/T 1002-2006 Calibration for low-level dissolved oxygen meter.standard gases calibration
- DL/T 1814-2018 Guidelines for analysis and judgment of dissolved gas in oil-immersed power transformer factory test oil
- DL/T 5139-2001 Specification for designing gas-insulation metal-enclosed switchgear of hydropower station
- DL/T 5139-2001（条文说明） Specification for designing gas-insulation metal-enclosed switchgear of hydropower station(explanation)
Professional Standard - Energy, Gas instrument factory
- DL/T 1462-2023 On-line Instrument Inspection Regulations for Hydrogen System in Power Plants
- NB/T 20026-2014 General requirements for instrumentation and control systems important to safety in nuclear power plants
- NB/T 20026-2010 Nuclear power plants-Instrumentation and control for systems important to safety-General requirements for systems
- NB/T 20296-2014 Maintenance requirement of electrical, instrumentation and control equipment important to safety of nuclear power plant
- NB/T 20053-2011 Installation requirement of electric,instrumentation and control equipment important to safety of nuclear power plant
- NB/T 20229-2013 Electrical module type test of safety important instrumentation and control system for nuclear power plants
- NB/Z 20540-2019 Guidelines for the application of commercial-grade items in nuclear power plant safety-level electrical instrumentation and control equipment
- NB/T 25110-2020 Technical guidelines for commissioning of combustible gas monitoring and control systems in nuclear power plants
- NB/T 20476.9-2019 Renewal of operating license for nuclear power plants Part 9: Time-limited aging analysis of electrical and I&C equipment
- NB/T 20031-2021 Control of Combustible Gas Concentration in Containment after Accident of PWR Nuclear Power Plant
CZ-CSN, Gas instrument factory
Professional Standard - Medicine, Gas instrument factory
- YY 0601-2007 Anaesthetic gas monitors
- YY 0601-2009 Medical electrical equipment Particular requirements for basic safety and essential performance of respiratory gas monitors
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas instrument factory
未注明发布机构, Gas instrument factory
- BS EN ISO 11196:1997 Anaesthetic gas monitors
- BS EN 61207-7:2013(2015) Expression of performance of gas analyzers Part 7 : Tuneable semiconductor laser gas analyzers
- BS EN IEC IEEE 62582-6:2021 Nuclear power plants — Instrumentation and control important to safety — Electrical equipment condition monitoring methods Part 6 : Insulation resistance
- BS EN 60761-3:2004(2005) Equipment for continuous monitoring radioactivityingaseous effluents — Part 3 : Specific requirements for radioactive noble gas monitors
- BS EN ISO 21647:2009 Medical electrical equipment — Particular requirements for the basic safety and essential performance of respiratory gas monitors
US-FCR, Gas instrument factory
American Society of Mechanical Engineers (ASME), Gas instrument factory
National Metrological Verification Regulations of the People's Republic of China, Gas instrument factory
Taiwan Provincial Standard of the People's Republic of China, Gas instrument factory
Korean Agency for Technology and Standards (KATS), Gas instrument factory
- KS R 5035-2005(2010) Gas leakage alarms for LP gas automobiles
- KS R 5035-1980 Gas leakage alarms for LP gas automobiles
- KS I 2218-2009 Detector tube type gas measuring instruments
- KS E 4090-2013 Portable type methane gas detector
- KS I 2217-2009 Non-dispersive infrared gas analyzer
- KS I 2219-2015 General rules for calibration method of gas analyzer
- KS C IEC 61207-6-2014(2019) Expression of performance of gas analyzers — Part 6: Photometric analyzers
- KS E 4115-2006(2011) Interferometer type gas alarms
- KS I 2219-2015(2020) General rules for calibration method of gas analyzer
- KS E 4115-1980 Interferometer type gas alarms
- KS C IEC 61207-2-2014(2019) Expression of performance of gas analyzers — Part 2: Oxygen in gas(utilizing high-temperature electrochemical sensors)
- KS B ISO 9951-2014(2019) Measurement of gas flow in closed conduits — Turbine meters
- KS P ISO 7767:2009 Oxygen monitors for monitoring patientbreathing mixtures－Safety requirements
- KS P ISO 7767:2003 Oxygen monitors for monitoring patientbreathing mixtures－Safety requirements
- KS C 6591-2007(2018) Installation, operation and maintenance of combustible gas detection instruments
- KS C 6592-2007(2018) Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide
- KS C IEC 62582-1:2017 Nuclear power plants — Instrumentation and control important to safety — Electrical equipment condition monitoring methods — Part 1: General
- KS I ISO 6145-7:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 7:Thermal mass-flow controllers
- KS I ISO 6145-7:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
- KS I ISO TR 12148-2011(2016) Natural gas－Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)
- KS C IEC 62582-1-2017(2022) Nuclear power plants — Instrumentation and control important to safety — Electrical equipment condition monitoring methods — Part 1: General
- KS C 6593-2007(2018) Installation, operation and maintenance of toxic gas-Detection instruments：Hydrogen sulfide
- KS C IEC 61577-3-2014(2019) Radiation protection instrumentation — Radon and radon decay product measuring instruments — Part 3: Specific requirements for radon decay product measuring instruments
- KS P ISO 21647-2010(2016) Medical electrical equipment－Particular requirements for the basic safety and essential performance of respiratory gas monitors
- KS I ISO TR 12148:2011 Natural gas－Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)
- KS C 6599-2007(2018) Installation, operation and maintenance of combustible gases detection instruments in domestic premises
Group Standards of the People's Republic of China, Gas instrument factory
- T/SBX 025-2019 Fixed Gas Detector
- T/CNS 41-2020 Design criteria for the instrumentation system of high temperature gas cooled reactor nuclear power plant
- T/ZZB 019-2015 Tunable laser gas analyzer
- T/SBX 15-2018 Portable Gas Detection Alarm
- T/CTS 10-2022 Quick screening breath alcohol analyzer
- T/CEC 542.1-2021 General Specifications for Gas Test Instruments for Electric Power Part 1: Gas Humidity Test Instruments
- T/BSRS 027-2020 Technical specification for the analysis of gamma spectra of inert gas in gaseous effluents for nuclear power plants
- T/QGCML 935-2023 Portable High Sensitivity Multi-parameter Gas Detector
- T/CNS 29-2020 Core thermal hydraulic design criteria for high temperature gas cooled reactor nuclear power plant
- T/CEC 542.2-2022 General technical requirements for gas testing instruments for electric power Part 2: Gas chromatography for sulfur hexafluoride gas purity testers
- T/CNS 35-2020 Design criteria for the primary circuit gas sampling and analyzing system of high temperature gas-cooled reactor nuclear power plant
- T/CCSAS 015-2022 Code for safe use and maintenance of gas detector
- T/CEC 567-2021 SF6/N2 mixed gas mixture ratio detector technical conditions
- T/ZZB 0373-2018 Automotive dashboard and airbag inject integratedly mould
- T/CEC 126-2016 Calibration method of sulfur hexafluoride gas decomposition product detector
- T/CEC 293-2020 Technical specifications for charged detection instruments for sulfur hexafluoride gas decomposition products
Association Francaise de Normalisation, Gas instrument factory
- NF C46-251-7*NF EN 61207-7:2014 Expression of performance of gas analyzers - Part 7 : tunable semiconductor laser gas analyzers
- NF EN 61207-7:2014 Expression des performances des analyseurs de gaz - Partie 7 : analyseurs de gaz laser à semiconducteurs accordables
- NF X20-302:1974 Gas analysis by mass spectrometry. Determination of gas chemical composition.
- NF C46-253*NF EN 61207-3:2002 Gas analysers - Expression of performance - Part 3 : paramagnetic oxygen analysers.
- NF C46-251-3*NF EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3 : paramagnetic oxygen analysers
- NF EN 61207-6:2015 Expression des performances des analyseurs de gaz - Partie 6 : analyseurs photométriques
- NF EN IEC 61207-3:2019 Analyseurs de gaz - Expression des performances - Partie 3 : analyseurs d'oxygène paramagnétiques
- NF EN 61577-2:2017 Instrumentation pour la radioprotection - Instruments de mesure du radon et des descendants du radon - Partie 2 : exigences spécifiques pour les instruments de mesure du 222Rn et du 220Rn
- NF C23-541-2:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2 : performance requirements for apparatus for the detection of combustible gases.
- NF C46-251-6*NF EN 61207-6:2015 Expression of performance of gas analyzers - Part 6 : photometric analyzers
- NF C46-256:1994 Expression of performance of gas analysers. Part 6 : photometric analyzers.
- NF EN IEC/IEEE 62582-6:2021 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Méthodes de surveillance de l'état des matériels électriques - Partie 6 : résistance d'isolement
- NF C27-240/A1*NF EN 61181/A1:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- NF C23-570:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
- NF C23-570*NF EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
- NF C23-558:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.
- NF C46-251:1994 Expression of performance of gas analyzers. Part 1 : general.
- NF D30-500/A1:1997 Test gases - Test pressures - Appliances categories.
- NF EN 61207-1:2011 Expression des performances des analyseurs de gaz - Partie 1 : généralités
- NF C46-251-2*NF EN IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2 : measuring oxygen in gas utilizing high-temperature electrochemical sensors
- NF EN IEC 61207-2:2019 Expression des qualités de fonctionnement des analyseurs de gaz - Partie 2 : mesure de l'oxygène contenu dans le gaz en utilisant des capteurs électrochimiques à haute température
- NF ISO 17089-1:2020 Mesurage du débit des fluides dans les conduites fermées - Compteurs à ultrasons pour gaz - Partie 1 : compteurs pour transactions commerciales et allocations
- NF EN 61181/A1:2012 Matériels électriques imprégnés d'huile minérale - Application de l'analyse des gaz dissous (AGD) lors d'essais en usine de matériels électriques
- NF EN 61181:2007 Matériaux électriques imprégnés d'huile minérale - Application de l'analyse des gaz dissous (AGD) lors d'essais en usine de matériels électriques
- NF C27-240:1993 Impregnated insulating materials. Application of dissolved gas analysis (dga) to factory tests on electrical equipment.
- NF C27-240*NF EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- NF EN 14624:2020 Performances des détecteurs de fuites portables et des détecteurs de gaz fixes pour tous les fluides frigorigènes
- NF X10-122-1:2011 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1 : meters for custody transfer and allocation measurement.
- NF C23-557:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.
- NF X10-122-1*NF ISO 17089-1:2020 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1 : meters for custody transfer and allocation measurement
- NF EN 60761-3:2005 Équipements de surveillance en continu de la radioactivité dans les effluents gazeux - Partie 3 : exigences particulières aux moniteurs de gaz rares radioactifs
- NF E35-422*NF EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- NF C46-252*NF EN 61207-2:1994 Expression of performance of gas analyzers. Part 2 : oxygen in gas (utilizing high-temperature electrochemical sensors).
German Institute for Standardization, Gas instrument factory
- DIN EN 61207-7:2015-07 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers (IEC 61207-7:2013); German version EN 61207-7:2013 / Note: Applies in conjunction with DIN EN 61207-1 (2011-04).
- DIN EN 61207-6:1995 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994
- DIN EN 50270:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2006
- DIN 12404:1980 Laboratory glassware; gas inlet tubes
- DIN EN 61207-6:2016-03 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015 / Note: DIN EN 61207-6 (1995-02) remains valid alongside this standard until 2017-12-30.
- DIN EN IEC 61207-3:2020-12 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (IEC 61207-3:2019); German version EN IEC 61207-3:2019 / Note: DIN EN 61207-3 (2002-11) and DIN EN 61207-3 Berichtigung 1 (2003-05) remain valid alongside this standard u...
- DIN EN 13625:2002-03 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001
- DIN EN 61207-1:2011-04 Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:2010); German version EN 61207-1:2010 / Note: DIN EN 61207-1 (1995-02) remains valid alongside this standard until 2013-07-01.
- DIN 25455:1990 Treatment of radioactive contaminated gases in nuclear power plants; light water reactors
- DIN EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2015
- DIN EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007); German version EN 61181:2007
- DIN 51893:2013-12 Gas analysis - Requirements for specifications of analysers/analytical equipment
- DIN EN IEC 61207-2:2021-03 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (IEC 61207-2:2019); German version EN IEC 61207-2:2019 / Note: DIN EN 61207-2 (1995-02) remains valid alongside this standar...
- DIN EN IEC 61207-3:2020 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (IEC 61207-3:2019); German version EN IEC 61207-3:2019
- DIN 12473-1:1976 Laboratory glassware; gas sampling tubes with straight bore stopcocks
- DIN ISO 23139:2022-10 Biological equipment for treating air and other gases - Application guidance for deodorization in wastewater treatment plants (ISO/DIS 23139:2022); Text in German and English / Note: Date of issue 2022-08-26
- DIN EN 61207-3:2002 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002); German version EN 61207-3:2002
- DIN 11622-2:2015-09 Silage and liquid manure containers, containers in biogas plants, bunker silos and trench silos - Part 2: Silage and liquid manure containers and containers in biogas plants made of concrete
- DIN 12804:1975 Laboratory glassware; densitiy hydrometers for liquefied gases of hydrocarbons
- DIN 12473-2:1976 Laboratory glassware; gas sampling tubes with V-bore stopcocks
- DIN 11622-2:2015 Silage and liquid manure containers, containers in biogas plants, bunker silos and trench silos - Part 2: Silage and liquid manure containers and containers in biogas plants made of concrete
- DIN EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- DIN EN 14624:2020-08 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants; German version EN 14624:2020
- DIN VDE 0405-4:2005 Determination of the breath alcohol concentration - Part 4: Testing of evidential breath analyzers by using calibration gas
- DIN EN 61207-6:2016 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015
- DIN 12702:1978 Laboratory glassware; volumetric glassware for gas analysis, gas burettes, azotometers, eudiometers, nitrometers
- DIN IEC 62302:2008 Radiation protection instrumentation - Equipment for sampling and monitoring radioactive noble gases (IEC 62302:2007)
ES-UNE, Gas instrument factory
- UNE-EN 61207-7:2013 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers (Endorsed by AENOR in January of 2014.)
- UNE-EN 61207-7:2013/AC:2015 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers (Endorsed by AENOR in September of 2015.)
- UNE-EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers (Endorsed by AENOR in February of 2015.)
- UNE 60495-2:2009 ERRATUM:2010 Gaseous fuels. Diaphragm domestic meter supports for gaseous fuels. Part 2: Meters placed outside.
- UNE-EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (Endorsed by Asociación Española de Normalización in October of 2019.)
- UNE-EN IEC 62465:2019 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems (Endorsed by Asociación Española de Normalización in August of 2019.)
- UNE-EN 61207-1:2010 Expression of performance of gas analyzers -- Part 1: General (Endorsed by AENOR in November of 2010.)
- UNE-EN IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (Endorsed by Asociación Española de Normalización in October of 2019.)
- UNE-EN 60761-3:2004 Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 3: Specific requirements for radioactive noble gas monitors (Endorsed by AENOR in March of 2005.)
- UNE-EN 14624:2021 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- UNE-EN IEC/IEEE 62582-6:2021 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 6: Insulation resistance (Endorsed by Asociación Española de Normalización in September of 2021.)
European Committee for Standardization (CEN), Gas instrument factory
- EN 13205:2001 Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations
- EN 50016:1978 Electrical apparatus for potentially explosive atmospheres; Pressurized apparatus "p"
- EN 50016:1978/A1:1979 Electrical apparatus for potentially explosive atmospheres; pressurized apparatus p
- EN 50015:1978 Electrical apparatus for potentially explosive atmospheres; Oil immersion "o"
- EN 50015:1978/A1:1979 Electrical apparatus for potentially explosive atmospheres; oil immersion o
- EN 50014:1978 Electrical apparatus for potentially explosive atmospheres; general requirements
- EN 50014:1978/A1:1979 Electrical apparatus for potentially explosive atmospheres; general requirements
- EN 50014:1978/A2:1982 Electrical apparatus for potentially explosive atmospheres; general requirements
- EN 50014:1978/A3:1982 Electrical apparatus for potentially explosive atmospheres; general requirements
- EN 50014:1978/A4:1982 Electrical apparatus for potentially explosive atmospheres; general requirements
- EN 50014:1978/A5:1986 Electrical apparatus for potentially explosive atmospheres; general requirements
- EN 50033:1991 Electrical apparatus for potentially explosive atmospheres; caplights for mines susceptible to firedamp
- EN 50017:1978 Electrical apparatus for potentially explosive atmospheres; Powder filling "q"
- EN 50017:1978/A1:1979 Electrical apparatus for potentially explosive atmospheres; powder filling q
- EN 50018:1978 Electrical apparatus for potentially explosive atmospheres; Flameproof enclosure "d".
- EN 50018:1978/A1:1979 Electrical apparatus for potentially explosive atmospheres; flameproof enclosure d
- EN 50018:1978/A2:1982 Electrical apparatus for potentially explosive atmospheres; flameproof enclosure d
- EN 50018:1978/A3:1985 Electrical apparatus for potentially explosive atmospheres; flameproof enclosure d
- EN 50019:1978 Electrical apparatus for potentially explosive atmospheres; increased safety "e"
- EN 50019:1978/A1:1979 Electrical apparatus for potentially explosive atmospheres; increased safety e
- EN 50019:1978/A2:1983 Electrical apparatus for potentially explosive atmospheres; increased safety e
- EN 50019:1978/A3:1985 Electrical apparatus for potentially explosive atmospheres; increased safety e
- EN 50019:1978/A5:1990 Electrical apparatus for potentially explosive atmospheres; increased safety e
- EN ISO 6145-7:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
- EN 50020:1977 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
- EN 50020:1977/A1:1979 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
- EN 50020:1977/A2:1985 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
- EN 50020:1977/A3:1990 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
- EN 50020:1977/A4:1990 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
- EN 50020:1977/A5:1990 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
- EN 50028:1987 Electrical apparatus for potentially explosive atmospheres; encapsulation m
- EN 50039:1980 Electrical apparatus for potentially explosive atmospheres. Intrinsic safety "i" Systems
- EN 13625:2001 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
AENOR, Gas instrument factory
- UNE 73109:2001 ENVIRONMENT QUALIFICATION CRITERIA FOR ELECTRICAL EQUIPMENT AND INSTRUMENTATION IN NUCLEAR POWER PLANTS.
- UNE-EN 61207-3:2004 Gas analyzers - Expression of performance -- Part 3: Paramagnetic oxygen analyzers
- UNE 176101:2010 Automatic agrometerological weather stations networks. Characteristics, instrumentation and specific aspects.
- UNE-EN 61207-2:2002 Expression of performance of gas analyzers -- Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors).
- UNE 82501:2004 Measuring instruments. Instruments intended to measure the emissions of exhaust pollutant gaz of motor vehicles. Characteristics and test methods.
- UNE 60495-2:2009 Gaseous fuels. Diaphragm domestic meter supports for gaseous fuels. Part 2: Meters placed outside.
- UNE-EN 61181:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- UNE-EN 61181:2008/A1:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- UNE-EN 13625:2002 Non-destructive testing. Lead test. Guide to the selection of instrumentation for the measurement of gas leakage.
Professional Standard - Petroleum, Gas instrument factory
- SY/T 6537-2002 Analysis methods of gas and solution for natural gas treating plant
- SY/T 6537-2016 Gas and solution analysis method in natural gas purification plant
- SY/T 6370-1998 Measuring instruments of core gas permeability
- SY/T 6810-2010 The calibration method of measuring instruments of core gas
- SY 6810-2010 Calibration method of rock gas permeability tester
European Committee for Electrotechnical Standardization（CENELEC）, Gas instrument factory
- EN 61207-7:2013 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers
- EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
- EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers
- EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (Incorporates Amendment A1: 2012)
- EN 61207-1:2010 Expression of performance of gas analyzers - Part 1: General
国家市场监督管理总局、中国国家标准化管理委员会, Gas instrument factory
- GB/T 40444-2021 General requirements for instrumentation and control systems important to safety in nuclear power plants
- GB/T 36242-2018 Volume conversion device for gas meter
API - American Petroleum Institute, Gas instrument factory
- API SALES OF NGL & LRG-1996 1996 Sales of Natural Gas Liquids and Liquefied Refinery Gases
- API SALES OF NGL & LRG-2000 1999 Sales of Natural Gas Liquids and Liquefied Refinery Gases
- API RP 550 P3-1977 Manual on Installation of Refinery Instruments and Control Systems Part III - Fired Heaters and Inert Gas Generators
- API RP 550 P2 S5-1983 Manual on Installation of Refinery Instruments and Control Systems - Part 11-Process Stream Analyzers Section 5-0xygen Analyzers (FOURTH EDITION)
- API RP 550 P3-1975 Manual on Installation of Refinery Instruments and Control Systems Part III-Fired Heaters and Inert Gas Generators (First Edition)
- API RP 550 P2 S7-1984 Manual on Installation of Refinery Instruments and Control Systems - Part 11-Process Stream Analyzers - Section 7 - electrochemical liquid analyzers (FOURTH EDITION)
- API PUBL 931 C16-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 16-ODOR
- API STD 680-1987 Packaged Reciprocating Plant and Instrument Air Compressors for General Refinery Services
- API RP 550 P1 S9-1974 MANUAL ON INSTALLATION OF REFINERY INSTRUMENTS AND CONTROL SYSTEMS PART I-PROCESS INSTRUMENTATION AND CONTROL SECTION 9-AIR SUPPLY SYSTEMS (THIRD EDITION)
- API RP 550 P1 S9-1980 Manual on Installation of Refinery Instruments and Control Systems Part I - Process Instrumentation and Control Section 9 - Air Supply Systems (FOURTH EDITION)
- API PUBL 931 C4-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 4-GAS FLOW MEASUREMENT METHODS
- API PUBL 931-1975 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS AND VOLUME ON LIQUID WASTES
- API PUBL 931 C6-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 6-DISPERSION OF GASES
- API PUBL 931 C17-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 17-NOISE
Compressed Gas Association (U.S.), Gas instrument factory
- CGA P-8.6-2015 UNMANNED AIR GAS PLANTS-DESIGN AND OPERATION
- CGA P-64-2014 Guideling for the location of occupied buildings in industrial gas plants
- CGA SB-28-2013 SAFETY OF INSTRUMENT AIR SYSTEMS BACKED UP BY GASES OTHER THAN AIR
Danish Standards Foundation, Gas instrument factory
- DS/INF 111:1996 Distribution plant of industrial gases at user's works
- DS/EN 61207-3/Corr.2:2003 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
- DS/EN 61207-3/Corr.1:2003 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
- DS/EN 61207-3:2002 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
- DS/EN 61181:1994 Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipmqnt
- DS/EN 61207-1:2011 Expression of performance of gas analyzers - Part 1: General
- DS/EN 61181:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- DS/EN 61181/A1:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- DS/EN IEC/IEEE 62582-6:2021 Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 6: Insulation resistance
- DS/EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
United States Navy, Gas instrument factory
International Electrotechnical Commission (IEC), Gas instrument factory
- IEC 61207-7:2013/COR1:2015 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers; Corrigendum 1
- IEC 61207-3:1998 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
- IEC 60951-2:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring system for accident and post-accident conditions - Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air
- IEC 61207-3:2019 RLV Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
- IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
- IEC 61207-3:2002/COR2:2003 Gas analyzers - Expression of performance - Part 3：Paramagnetic oxygen analyzers; Technical Corrigendum 2
- IEC/IEEE 62582-2:2011/AMD1:2016 Nuclear power plants - Instrumentation and control important to
safety - Electrical equipment condition monitoring methods - Part 2:
Indenter modulus
- IEC/IEEE 62582-2:2011+AMD1:2016 CSV Nuclear power plants - Instrumentation and control important to
safety - Electrical equipment condition monitoring methods - Part 2:
Indenter modulus
- IEC/IEEE 62582-2-2011+AMD1-2016 CSV Nuclear power plants - Instrumentation and control important to
safety - Electrical equipment condition monitoring methods - Part 2:
Indenter modulus
- IEC 61181:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- IEC 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- IEC 61181:1993 Impregnated insulating materials; application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- IEC 61181:2007+AMD1:2012 CSV Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- IEC 60231C:1974 General principles of nuclear reactor instrumentation
- IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors
- IEC TS 61081:1991 Pneumatic instruments driven by associated process gas - Safe installation and operating procedures - Guidelines
- IEC/IEEE 62582-6:2019 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 6: Insulation resistance
- IEC/IEEE 62582-6-2019 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 6: Insulation resistance
- IEC TR 61081:1991 Pneumatic instruments driven by associated process gas; safe installation and operating procedures; guidelines
- IEC 61181:2007/AMD1:2012 Amendment 1 - Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- IEC 60231E:1977 General principles of nuclear reactor instrumentation. Fifth supplement: Gascooled high temperature power reactor with indirect-cycle turbines
- IEC/IEEE 62582-2:2022 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 2: Indenter measurements
- IEC/IEEE 62582-2-2022 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 2: Indenter measurements
- IEC/IEEE 62582-2-2022 RLV Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 2: Indenter measurements
American National Standards Institute （ANSI), Gas instrument factory
Henan Provincial Standard of the People's Republic of China, Gas instrument factory
- DB41/T 1276-2016 Portable combustible gas inspection instrument
- DB41/T 1522-2018 Technical specification for inspection and detection of flammable and toxic gas alarms
- DB41/T 1041-2015 Pressure Type Sulfur Hexafluoride Gas Density Controller Calibrator
American Gas Association, Gas instrument factory
- AGA GMM-3-1990 Gas Measurement Manual - Part 3: Gas Orifice Meters (XQ9011)
- AGA GMM-12 AND 13-1999 Gas Measurement Manual - Part 12: Meter Proving; and Part 13: Distribution Meter Data (XQ0278; Reprinted 12/1999)
- AGA REPORT 9-2007 Measurement of Gas by Multipath Ultrasonic Meters (Second Edition; XQ0701; Also Known as API MPMS 14.9)
- AGA GMM-9-1988 Gas Measurement Manual - Part 9: Design of Meter and Regulator Stations (XQ8803)
- AGA GMM-14-1982 Gas Measurement Manual - Part 14: Meter Repair and Selection (XQ0381)
International Organization for Standardization (ISO), Gas instrument factory
- ISO 6338:2023 Method to calculate GHG emissions at LNG plant
- ISO/FDIS 6338 Method to calculate GHG emissions at LNG plant
- ISO 8158:1985 Evaluation of the performance characteristics of gas analysers
- ISO 6145-7:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
- ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
- ISO 6145-5:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
- ISO/FDIS 23139:2023 Biological equipment for treating air and other gases — Requirements and application guidance for deodorization in wastewater treatment plants
- ISO 23139:2023 Biological equipment for treating air and other gases — Requirements and application guidance for deodorization in wastewater treatment plants
- ISO 17089-1:2019 Measurement of fluid flow in closed conduits — Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement
- ISO/TR 12148:2009 Natural gas - Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)
SE-SIS, Gas instrument factory
- SIS SS IEC 780:1988 Nuclear instrumentation — Qualification of electrical items of the safety system for nuclear power generating stations
- SIS SEN 21 08 56-1969 Electrical apparatus for explosive gas atmospheres Measuring instruments and accessories
- SIS SS-EN 50 058-1992 Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % (v/v) gas
- SIS SMS 2956-1972 Vitreous enamels. Apparatus for testing with acid and neutral liquids and vapours
教育部, Gas instrument factory
CENELEC - European Committee for Electrotechnical Standardization, Gas instrument factory
- EN 50016:1977 Electrical Apparatus for Potentially Explosive Atmospheres: Pressurized Apparatus 'P'
- EN 50016:1995 Electrical Apparatus for Potentially Explosive Atmospheres Pressurized Apparatus ?p?
- EN 50016:2002 "Electrical Apparatus for Potentially Explosive Atmospheres - Pressurized Apparatus ""p"""
- EN 61207-6:1994 Expression of Performance of Gas Analyzers Part 6: Photometric Analyzers
- EN 50015:1994 Electrical Apparatus for Potentially Explosive Atmospheres - Oil Immersion 'O'
- EN 50015:1998 "Electrical Apparatus for Potentially Explosive Atmospheres - Oil Immersion ""o"""
- EN 50015:1977 Electrical Apparatus for Potentially Explosive Atmospheres: Oil Immersion 'O'
- EN 61181:1993 Impregnated Insulating Materials - Application of Dissolved Gas Analysis (DGA) to Factory Tests on Electrical Equipment
- EN 61207-1:1994 Expression of Performance of Gas Analyzers Part 1: General
- EN 50017:1994 Electrical Apparatus for Potentially Explosive Atmospheres Powder Filling ?Q?
- EN 50019:2000 "Electrical Apparatus for Potentially Explosive Atmospheres Increased Safety ""e"" (Incorporating Corrigendum April 2003)"
- EN 50017:1998 "Electrical Apparatus for Potentially Explosive Atmospheres - Powder Filling ""q"""
- EN 50018:2000 Electrical Apparatus for Potentially Explosive Atmospheres - Flameproof Enclosures 'd'
- EN 50017:1977 Electrical Apparatus for Potentially Explosive Atmospheres: Powder Filling ?Q?
- EN 50019:1994 Electrical Apparatus for Potentially Explosive Atmospheres - Increased Safety 'E'
- EN 50018:1994 Electrical Apparatus for Potentially Explosive Atmospheres - Flameproof Enclosures 'd'
- EN 50019:1985 Electrical Apparatus for Potentially Explosive Atmospheres: Increased Safety 'E'
- EN 50033:1986 Electrical Apparatus for Potentially Explosive Atmospheres: Caplamps for Mines Susceptible to Firedamp
- EN 50020:1994 Electrical Apparatus for Potentially Explosive Atmospheres - Intrinsic Safety 'i'
- EN 50073:1999 Guide for Selection@ Installation@ Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen
国家能源局, Gas instrument factory
- NB/T 20428-2017 General requirements for computer security prevention of nuclear power plant instrumentation and control systems
- SY/T 6679.4-2016 Comprehensive logging tool calibration method Part 4: Infrared gas analyzer
- NB/T 10162-2019 General technical conditions for infrared gas analyzers used in coal mines
- NB/T 20512.3-2018 Nuclear power plant operating license extension Part 3: Review of aging management of electrical and instrumentation and control equipment
CN-STDBOOK, Gas instrument factory
- 图书 A-4762 Gas flowmeter volume corrector and gas precession vortex flowmeter
BELST, Gas instrument factory
- STB 1626.1-2006 Boilers plant working on gas, liquid and solid fuel. Emission limits for pollutants
Professional Standard - Chemical Industry, Gas instrument factory
PL-PKN, Gas instrument factory
- PN E08114-1972 Electrical apparatus for explosive gaz atmospheres Oil-immersed apparatus
- PN E88000-1969 Switchboard electrical measuring instruments Main overall dimenjions
Professional Standard - Education, Gas instrument factory
工业和信息化部, Gas instrument factory
- HG/T 5831-2021 Online gas mass spectrometer analyzer for chemical industry
- HG/T 3987-2016 Electrochemical hydrogen sulfide gas detector
- HG/T 5227-2017 Fluidized catalytic cracking regeneration flue gas laser gas analyzer
Professional Standard - Nuclear Industry, Gas instrument factory
- EJ/T 626-1992 Requirements for installation, inspection and testing of nuclear power plant electrical, instrumentation and control equipment
- EJ 530-1990 Quality assurance program requirements for the design and manufacture of safety-level instruments and electrical equipment in nuclear power plants
RO-ASRO, Gas instrument factory
- STAS SR 9296-1996 Water supplies Chlorination plants for water with gaseous chlorine General design specifications
- STAS SR EN 50014-1995 Electrical apparatus for potentially explosive atmospheres General requirements
- STAS 11774-1980 Plants and installations for heat treatment COMBUSTIB1LE GAS VERTICAL FURNACES Main parameters
RU-GOST R, Gas instrument factory
- GOST 4.170-1985 System of product-quality indices. Analysers for aerosols of solid and granular materials. Nomenclature of indices
- GOST R 53174-2008 Electric generating plants with diesel and gas internal combustion engines. General specifications
- GOST 21107.4-1975 Gas discharge devices. Ignitrons. Methods for measurement of parameters
- GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
- GOST R 56325-2014 Medical electrical equipment. Respiratory gas monitors. Technical requirements for governmental purchases
- GOST 5439-1976 Natural and synthetic combustion gases. Method for determination of volume fraction of components using a set of gas analysers (SGA)
- GOST R EN 308-2011 Heat exchangers. Test methods for determining the power criteria of air/air and an air/exhaust gas mixture heat recovery devices
- GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
- GOST 21107.1-1975 Gas discharge devices. Methods of measurement of electrical parameters of stabilizing tube
- GOST 4.374-1985 Product-quality index system. Gas analysers. Index nomenclature
- GOST R 53178-2008 Electric generating plants with gasiline, diesel and gas internal combustion engines. Test methods
- GOST 21107.14-1980 Gas discharge devices. Methods of the measurement of electrical parameters of tacitrons
- GOST 13320-1981 Automatic instruments of contnuous action used for gas analysis. General requirements
- GOST 24032-1980 Mine instruments for gas analysis. General technical requirements. Testing methods
- GOST 21107.7-1975 Gas discharge devices. Methods of measurement of electrical parameters of spark discharges
- GOST 21107.8-1976 Gas discharge devices. Measuring methods of electrical characteristics of impulsive diodes
- GOST 21107.9-1976 Gas-discharge devices. Methods of measurement of electrial parameters of pulse thyratrons
- GOST R 8.766-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration dissolving in water gasses (oxygen, hydrogen)
- GOST R 8.922-2016 State system for ensuring the traceability of measurements. Gas analyzers and gas alarm devices for determination of combustible gases and vapors in working zone air. Testing method
- GOST 8.618-2013 State system for ensuring the traceability of measurements. Gas analyzers and gas alarm devices for determination of combustible gases and vapors in working zone air. Verification procedure
- GOST 8.652-2016 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration of dissolving in water gasses (oxygen, hydrogen)
- GOST 8.583-2003 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the refractive index of solid, liquid and gaseous medium
- GOST 8.578-2008 State system for ensuring the uniformity of measurements. State verification scheme for measuring instruments of the content of components in gaseous media
- GOST 8.611-2013 State system for ensuring the uniformity of measurements. Flow rate and quantity of gas. Technique (method) measurements by ultrasonic meters
- GOST 8.578-2002 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in gaseous media
- GOST 21107.5-1975 Gas discharge devices. Methods of measurement of electrical parameters of glow-discharge thyratrons and gas-filled rectifiers
- GOST 21107.3-1975 Gas discharge devices. Decatrons. Polyatrons. Methods for measurement of electrical parameters
- GOST 21107.6-1975 Gas discharge devices. Methods of measurement of electrical parameters of charactes display
- GOST 4.163-1985 Product-quality index system. Chromatographic liquid and gas analysers. Nomenclature of indices
- GOST 4.189-1985 System of product-quality indices. Electrical measuring resording instruments. Nomenclature of indices
National Metrological Technical Specifications of the People's Republic of China, Gas instrument factory
- JJF 1907-2021 Calibration Specification for Ambient Air online Monitoring Instruments
- JJF 1363-2019 Program of Pattern Evaluation of Sulfur Hydrogen Gas Detectors
- JJF 1158-2006 Calibration Specification for Stable Isotope Gas Mass Spectrometer
- JJF 1363-2012 Program of Pattern Evaluation of Sulfur Hydrogen Gas Analyzers
- JJF(京) 53-2018 Calibration specification for gas flowmeter volume corrector
- JJF 1979-2022 Calibration specifications for radioactive noble gas monitors
- JJF(京)53-2018 Calibration specification for gas flowmeter volume corrector
- JJF 1481-2014 Program of Pattern Evaluation of Vehicle Exhaust Emissions Measuring Instrument
- JJF 1364-2012 Program of Pattern Evaluation of Sulfur Dioxide Gas Detectors
- JJF 1764-2019 Program of Pattern Evaluation of Hydrogen Sulfide Gas Detectors for Mining
- JJF 1785-2019 Program of Pattern Evaluation of Breath Alcohol Analyzers
Military Standards (MIL-STD), Gas instrument factory
化学工业部, Gas instrument factory
AT-OVE/ON, Gas instrument factory
- OVE EN IEC 61207-3:2021 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (german version)
Society of Automotive Engineers (SAE), Gas instrument factory
- SAE J2970-2023 Minimum Performance Requirements for Non-Refrigerant Tracer Gases and Electronic Tracer Gas Leak Detectors
American Society for Testing and Materials (ASTM), Gas instrument factory
- ASTM D3284-05 Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
- ASTM D3284-05(2011) Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
- ASTM D3284-05(2019) Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
- ASTM D3284-99 Standard Test Method for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
- ASTM E498-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM E498/E498M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM E498/E498M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM D1137-53 Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer
- ASTM E1603/E1603M-11(2017) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603-99 Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603-99(2006) Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603/E1603M-11 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM D7165-22 Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
- ASTM F1452-92 Standard Specification for Minimum Performance and Safety Requirements for Anesthetic Gas Monitors
Occupational Health Standard of the People's Republic of China, Gas instrument factory
- GBZ/T 206-2007 Specification for gas detection in confined space by direct-reading detectors
- GBZ/T 222-2009 Guideline for selection of direct-reading gas detector in the confined space
Professional Standard - Aviation, Gas instrument factory
- HB 6813.10-1993 Nozzle body for measuring tools of pneumatic measuring instruments (L=58~78)
- HB 6813.11-1993 Nozzle body for measuring tools of pneumatic measuring instruments (L=58~78)
American Petroleum Institute (API), Gas instrument factory
- API RP 55-1995(2013) Recommended Practice for Oil and Gas Producing and Gas Processing Plant Operations Involving Hydrogen Sulfide
Lithuanian Standards Office , Gas instrument factory
- LST EN 61207-6-2001 Expression of performance of gas analyzers. Part 6: Photometric analyzers (IEC 61207-6:1994)
- LST EN 61207-3-2003 Gas analyzers. Expression of performance. Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002)
- LST EN 61181-2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007)
- LST EN 61207-1-2010 Expression of performance of gas analyzers -- Part 1: General (IEC 61207-1:2010)
- LST EN 61207-2-2001 Expression of performance of gas analyzers. Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994 + corrigendum 1994)
- LST EN 61181-2007/A1-2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007/A1:2012)
- LST EN 13625-2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
KR-KS, Gas instrument factory
US-CFR-file, Gas instrument factory
- CFR 40-1065.308-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.308:Continuous gas analyzer system-response and updating-recordingverification—for gas analyzers not continuously compensated for other gas species.
- CFR 40-1065.309-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.309:Continuous gas analyzer system-response and updating-recordingverification—for gas analyzers continuously compensated for other gas species.
- CFR 40-98.252-2013 Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart Y:Petroleum refineries. Section98.252:GHGs to report.
- CFR 40-98.253-2013 Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart Y:Petroleum refineries. Section98.253:Calculating GHG emissions.
ISA - International Society of Automation, Gas instrument factory
HU-MSZT, Gas instrument factory
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Gas instrument factory
- IEEE 62582-1-2011 Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 1: General
- IEEE 62582-2-2011 Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 2: Indenter modulus
- IEEE P62582-6/FDIS-2018 NUCLEAR POWER PLANTS ? INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY ? ELECTRICAL EQUIPMENT CONDITION MONITORING METHODS ? Part 6: Insulation resistance
- IEEE P62582-6/CD2-2017 NUCLEAR POWER PLANTS ? INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY ? ELECTRICAL EQUIPMENT CONDITION MONITORING METHODS ? Part 6: Insulation resistance
- IEEE 62582-3-2012 Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 3: Elongation at break
- IEEE 62582-5-2015 Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 5: Optical time domain reflectometry
CEN - European Committee for Standardization, Gas instrument factory
- EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers
Professional Standard - Coal, Gas instrument factory
- MT 563-1996 General technical specifications for portable gas measuring instruments used in coal mines
IT-UNI, Gas instrument factory
- UNI 11291-6-2021 Gas measurement systems - Hourly based gas metering systems - Part 6: Requirements for meters with Qmax ≤ 10m3/h
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gas instrument factory
- GB/T 35212.1-2017 Analysis and evaluation methods of gas and solution and desulfurization decarbonization and sulfur recovery for natural gas treating plant—Part 1: Gas and solution analysis
Standard Association of Australia （SAA）, Gas instrument factory
- IEC/IEEE 62582-2:2022 RLV Nuclear power plants — Instrumentation and control important to safety — Electrical equipment condition monitoring methods — Part 2: Indenter measurements
Institute of Electrical and Electronics Engineers (IEEE), Gas instrument factory
- IEC/IEEE 62582-1:2011 Edition 1.0 2011-08 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General
- IEEE 62582-4-2011 Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 4: Oxidation induction techniques
- IEC/IEEE 62582-4:2011 Edition 1.0 2011-08 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 4: Oxidation induction techniques
SAE - SAE International, Gas instrument factory
- SAE J2992-2020 FTIR Gas Analyzer Performance Evaluation / Qualification for Automotive Testing
- SAE J2992-2015 FTIR Gas Analyzer Performance Evaluation / Qualification for Automotive Testing
Professional Standard - Environmental Protection, Gas instrument factory
- HJ 920-2017 Emergency Monitoring of Inorganic Harmful Gases in Ambient Air with Portable Fourier Transform Infrared Instrument
Underwriters Laboratories (UL), Gas instrument factory
- UL 25 BULLETIN-2009 UL Standard for Safety Meters for Flammable and Combustible Liquids and LP-Gas
- UL 25 BULLETIN-2012 UL Standard for Safety Meters for Flammable and Combustible Liquids and LP-Gas
- UL 25 BULLETIN-2008 UL Standard for Safety Meters for Flammable and Combustible Liquids and LP-Gas
- UL 25 BULLETIN-2001 UL Standard for Safety Meters for Flammable and Combustible Liquids and LP-Gas
- UL 25 BULLETIN-2006 UL Standard for Safety Meters for Flammable and Combustible Liquids and LP-Gas
- UL 25 BULLETIN-2007 UL Standard for Safety Meters for Flammable and Combustible Liquids and LP-Gas
YU-JUS, Gas instrument factory
- JUS N.A5.864-1985 Basic environmental testing procedures. Test Qk: Sealing, tracer gas method with mass spectrometer