ZH
RU
ES
diluent ph
diluent ph, Total:450 items.
In the international standard classification, diluent ph involves: Paint ingredients, Organic chemicals, Paints and varnishes, Analytical chemistry, Crude petroleum, Coatings and related processes used in aerospace industry, Products of the chemical industry, Lubricants, industrial oils and related products, Laboratory medicine, Microbiology, Construction materials, Valves, Reinforced plastics, Spices and condiments. Food additives, Measurement of volume, mass, density, viscosity, Road engineering, Wastes, Plastics, Test conditions and procedures in general, Processes in the food industry, Sterilization and disinfection, Waxes, bituminous materials and other petroleum products, Surface treatment and coating, Measurement of fluid flow, Fuels, Milk and milk products, Raw materials for rubber and plastics, Veterinary medicine, Farming and forestry.
(U.S.) Ford Automotive Standards, diluent ph
- FORD ESK-M14J233-A-1994 THINNER
- FORD ESK-M14J250-A-1990 THINNER
- FORD ESK-M14J512-A1-1988 THINNER
- FORD SK-M14J9550-C-1994 THINNER
- FORD SK-M14J9561-A-1995 THINNER
- FORD SK-M14J9571-A-1994 THINNER
- FORD SK-M14J9571-B-1994 THINNER
- FORD SK-M14J9573-B-1994 THINNER
- FORD S-M14J210-A-1994 THINNER
- FORD S-M14J4500-A-1994 THINNER
- FORD WSK-M14J243-A-1990 THINNER
- FORD M14J200-A-1991 AROMATIC HYDROCARBON THINNERS
- FORD WSS-M14J519-A-1998 FADE OUT THINNER
- FORD WSS-M14J521-A1-1998 PRIMER THINNER
- FORD WSS-M14J520-A-1998 RETARDER THINNER
- FORD ESK-M14J229-A-1994 THINNER, FOR BASECOAT
- FORD WSS-M14J514-A-1997 SOLVENT, AROMATIC HYDROCARBON, THINNER
- FORD WSK-M14J247-A-1997 SOLVENT, NITROCELLULOSE THINNER
- FORD WSK-M14J248-A-1990 SOLVENT, NITROCELLULOSE THINNER
- FORD M14J100-A-1991 ALIPHATIC HYDROCARBON THINNERS
- FORD M14J504-A-1990 THINNER - EXEMPT ENAMEL
- FORD M14J506-A-1990 ENAMEL REDUCER - HIGH EFFICIENCY ACRYLIC
- FORD ESK-M14J512-A1-2012 THINNER ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESK-M14J250-A2-1990 THINNER (Shown on ESK-M14J250-A)
- FORD ESK-M14J512-A2-1988 THINNER Shown on ESK-M14J512-A1
- FORD SK-M14J9561-B-1995 THINNER (Shown on SK-M14J9561-A)
- FORD SK-M14J9561-C-1995 THINNER (Shown on SK-M14J9561-A)
- FORD ESK-M14J232-A-1994 THINNER, MIXTURE OF MIBK AND DIACETONEALCOHOL, DILUTION OF PAINTS
- FORD M14J147-1991 ALIPHATIC HYDROCARBON THINNERS (Shown on M14J100A)
- FORD WSS-M14J521-A2-1998 PURGE THINNER (Shown on WSS-M14J521-A1)
- FORD SK-M14J9561-D-1995 THINNER, RECYCLING BASECOAT, SOLID COLOUR AND CLEARCOAT, DILUTION OF PAINT (Shown on SK-M14J9561-A)
- FORD M14J136-A-1991 ALIPHATIC HYDROCARBON THINNERS Shown on M14J100-A
- FORD M14J148-1991 ALIPHATIC HYDROCARBON THINNERS (Shown on M14J100-A)
- FORD M14J167-A-1991 ALIPHATIC HYDROCARBON THINNERS Shown on M14J100-A
- FORD M14J208-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
- FORD M14J210-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
- FORD M14J217-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
- FORD M14J220-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
- FORD M14J242-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
- FORD M14J245-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
- FORD M14J260-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
- FORD S-M14J19-A-1995 THINNER, TOLUENE/XYLENE, LACQUER VISCOSITY REDUCTION
- FORD ASL PAINTS-14J-2020 APPROVED SOURCE LIST (ASL) - CATEGORY PAINTS AND COATING MATERIALS - SOLVENTS / THINNERS
- FORD WSK-M14J246-A-2012 THINNER, SUEDE COATING ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M14J262-A-1993 THINNER, GENERAL, FOR USE WITH AUTOMOTIVE REFINISH PRODUCTS
- FORD ASL CHEMICALS-99B-2020 APPROVED SOURCE LIST (ASL) - CATEGORY CHEMICALS - MISCELLANEOUS: ASSEMBLY AIDS / SOLVENTS / THINNERS / DISPERSANTS / FLOW AGENTS /
- FORD WSK-M14J263-A-2012 THINNER, GENERAL, FOR USE WITH AUTOMOTIVE REFINISH PRODUCTS ***TO BE USED WITH FORD WSS-M99P1111-A***
HU-MSZT, diluent ph
TH-TISI, diluent ph
United States Navy, diluent ph
- NAVY TT-T-2935 VALID NOTICE 1-2005 THINNER, PURGING
- NAVY TT-T-2935-2000 THINNER, PURGING
- NAVY MIL-R-25410 G NOTICE 1-1997 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
- NAVY MIL-R-25410 G-1991 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
- NAVY QPL-16173-84 NOTICE 1-2008 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
- NAVY QPL-16173-QPD-2010 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
- NAVY QPL-16173-2010 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
- NAVY QPL-16173-QPD-2011 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
- NAVY QPL-16173-2011 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
- NAVY QPL-16173-2012 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
- NAVY QPL-16173-QPD-2013 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
- NAVY QPL-16173-2013 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
- NAVY QPL-16173-QPD-2012 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
- NAVY MIL-R-29585 NOTICE 1-1997 REGULATOR, OXYGEN, CHEST MOUNTED, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
- NAVY MIL-R-29585-1991 REGULATOR, OXYGEN, CHEST MOUNTED, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
Society of Automotive Engineers (SAE), diluent ph
Taiwan Provincial Standard of the People's Republic of China, diluent ph
SAE - SAE International, diluent ph
PL-PKN, diluent ph
Professional Standard - Chemical Industry, diluent ph
Japanese Industrial Standards Committee (JISC), diluent ph
GM Europe, diluent ph
Group Standards of the People's Republic of China, diluent ph
工业和信息化部, diluent ph
AENOR, diluent ph
- UNE 48085:1985 WATER IN SOLVENTS AND THINNERS
- UNE 48057:1960 CORROSION TEST, OF SOLVENTS AND DILUENTS
- UNE 48050:1959 NON VOLATILE MATTER IN SOLVENTS AND DILUENTS OF PAINTS AND VARNISHES
- UNE 48161:1964 DILUENTS FOR NITROCELULOSIC ENAMELS AND VARNISHES CLOTHINGHTENERS
- UNE 48056:1960 ETHERS IN DILUENTS AND ENAMELS AND NITROCELULOSIC VARNISHES
- UNE 48055:1960 KETONES IN DILUENTS OF ENAMEL AND NITROCELULOSE VARNISHES
- UNE 48186:1964 DELAY DILUENT FOR INTROCELULOSIC ENAMELS AND VARNISHES CLOTH-TIGHTENERS
- UNE 48107:1961 HYDROCARBONS IN DILUENTS OF ENAMELS AND VARNISHES NITROCELULOSIC
- UNE-EN 15322:2014 Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
- UNE 104281-5-3:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTING AND ADHESIVES. TESTING METHODS. DILUTION STABILITY
- UNE-EN 13358:2010 Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
- UNE 125300-1:1994 LIGHT GAUGE METAL CONTAINERS. ROUND METAL CONTAINERS FOR PAINTS, VARNISHES AND DILUENTS. DIMENSIONAL CHARACTERISTICS.
Korean Agency for Technology and Standards (KATS), diluent ph
CZ-CSN, diluent ph
Canadian General Standards Board (CGSB), diluent ph
Professional Standard - Speciality, diluent ph
KR-KS, diluent ph
中国石油化工总公司, diluent ph
ES-AENOR, diluent ph
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, diluent ph
- GB/T 1751-1992 Determination of water of thinners and retarders
- GB/T 1755-1979 Methods of test for dilution ratio of thinners and anti-blushing agents
- GB/T 1753-1979 Method of test for evaporation rate of thinners and anti-blushing agents
- GB/T 1752-1979 Method for blushing test of thinners and anti-blushing agents
- GB/T 1722-1992 Estimation of colour of varnishes, boiled oils and thinners
- GB 19825-2005 Food additive.Diluted benzoyl peroxide
- GB/T 1721-1979 Methods of test for appearance and transparency of varnishes,boiled oils and thinners
- GB/T 1721-2008 Determination of appearance and transparency of varnishes,boiled oils and thinners
GM North America, diluent ph
GM Daewoo, diluent ph
VE-FONDONORMA, diluent ph
Indonesia Standards, diluent ph
RO-ASRO, diluent ph
- STAS 3122-1980 Paints and varnishes. THINNERS FOR NITROCELLULOSE ASE PRODUCTS
Standard Association of Australia (SAA), diluent ph
U.S. Military Regulations and Norms, diluent ph
Professional Standard - Medicine, diluent ph
American Society for Testing and Materials (ASTM), diluent ph
- ASTM D1617-22 Standard Test Method for Ester Value of Solvents and Thinners
- ASTM D1617-90(2001) Standard Test Method for Ester Value of Solvents and Thinners
- ASTM D1617-07 Standard Test Method for Ester Value of Solvents and Thinners
- ASTM D1617-90(1996) Standard Test Method for Ester Value of Solvents and Thinners
- ASTM D1617-07(2012) Standard Test Method for Ester Value of Solvents and Thinners
- ASTM D1296-01 Standard Test Method for Odor of Volatile Solvents and Diluents
- ASTM D1296-01(2007) Standard Test Method for Odor of Volatile Solvents and Diluents
- ASTM D1296-23 Standard Test Method for Odor of Volatile Solvents and Diluents
- ASTM D3272-76(2003) Standard Practice for Vacuum Distillation of Solvents From Solvent-Reducible Paints For Analysis
- ASTM D3271-87(2006) Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
- ASTM D1720-96(2000) Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
- ASTM D1720-03 Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
- ASTM D1720-96 Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
- ASTM D1720-03(2012) Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
- ASTM D1720-03(2008) Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
- ASTM D322-97(2007) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
- ASTM D322-97 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
- ASTM D8004-23 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
- ASTM D322-97(2012) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
British Standards Institution (BSI), diluent ph
- BS EN 13074-1:2019 Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders. Recovery by evaporation
- BS EN 13074-2:2019 Tracked Changes. Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders. Stabilization after recovery by evaporation
- BS EN 15626:2016 Tracked Changes. Bitumen and bituminous binders. Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test. Aggregate method
- BS 6782-16:2001 Binders for paints. General methods of test for water-dilutable binders
- BS 6782-17:2001 Binders for paints - Determination of MEQ value of water-dilutable binders
- BS EN 15322:2013 Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders
- BS EN 15322:2009 Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
- BS EN ISO 22518:2020 Paints and varnishes. Determination of solvents in water-thinnable coating materials. Gas-chromatographic method
- BS EN 14896:2006*BS 2000-546:2006 Bitumen and bituminous binders — Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders — Rotating spindle
viscometer method
- BS EN 14896:2006 Bitumen and bituminous binders — Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders — Rotating spindle
viscometer method
- BS EN 13358:2019 Bitumen and bituminous binders. Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
- BS EN 14895:2006*BS 2000-542:2006 Bitumen and bituminous binders — Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders
- BS EN 14895:2007 Bitumen and bituminous binders. Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders
- BS EN 14895:2006 Bitumen and bituminous binders — Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders
- BS EN ISO 8781-3:1991 Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the change in gloss
- BS EN 15626:2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
- BS EN 12846-2:2011 Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer. Cut-back and fluxed bituminous binders
- BS EN ISO 8781-2:1991 Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the change in fineness of grind
- BS 3680-2D:1993 Measurement of liquid flow in open channels. Dilution methods. Methods of measurement using fluorescent tracers
- BS 3680-2C:1993 Measurement of liquid flow in open channels. Dilution methods. Methods of measurement using chemical tracers
- BS EN ISO 8780-4:1991 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a bead mill
- BS EN ISO 4973:2023 Cosmetics. Microbiology. Quality control of culture media and diluents used in cosmetics standards
German Institute for Standardization, diluent ph
- DIN 53238-24:1995 Pigments and extenders - Method for assessment of ease of dispersion - Part 24: Microscopic assessment of dispersions of pigments and extenders
- DIN EN 15626:2016-09 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method; German version EN 15626:2016
- DIN 52024:2002 Bitumen and bituminous binders - Distillation of fluxed bitumen
- DIN EN 13074-1:2019-05 Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation; German version EN 13074-1:2019
- DIN 53770-1:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 1: Preparation of acid extracts
- DIN 53770-1:2014 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 1: Preparation of acid extracts
- DIN EN 13074-2:2019-05 Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation; German version EN 13074-2:2019
- DIN EN ISO 3262-3:2022-10 Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO/DIS 3262-3:2022); German and English version prEN ISO 3262-3:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-3 (1998-09).
- DIN 52033:2014-02 Bitumen and bituminous binders - Determination of the stickiness of rapid curing cut-backs
- DIN EN ISO 787-9:1995 General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension (ISO 787-9:1981); German version EN ISO 787-9:1995
- DIN 53176:2002 Binders for paints and varnishes - Determination of the amine value of water thinnable binders
- DIN 1995-4:2005 Bitumen and bituminous binders - Requirements for the binders - Part 4: Petroleum cut-back bitumen
- DIN EN 15322:2013-07 Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders; German version EN 15322:2013
- DIN EN ISO 22518:2021-02 Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019); German version EN ISO 22518:2020
- DIN 53770-7:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 7: Chromium content
- DIN 53770-6:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 6: Cadmium content
- DIN 53770-10:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 10: Copper content
- DIN 53770-14:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 14: Selenium content
- DIN 53770-2:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 2: Antimony content
- DIN 53770-4:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 4: Barium content
- DIN 53770-5:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 5: Lead content
- DIN 53770-11:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 11: Manganese content
- DIN 53770-13:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 13: Mercury content
- DIN 53770-12:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 12: Nickel content
- DIN 53770-9:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 9: Cobalt content
- DIN 53770-15:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 15: Zinc content
- DIN 53770-3:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 3: Arsenic content
- DIN 52033:2014 Bitumen and bituminous binders - Determination of the stickiness of rapid curing cut-backs
- DIN 51380:2016 Testing of lubricants - Test for fuel diluent in used automotive engine oils - Gas chromatography method
- DIN 51380:1990 Testing of lubricants; test for fuel diluent in used automotive engine oils; gas chromatography method
- DIN 53770-8:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 8: Chromium(VI) content
- DIN 55682:2000 Solvents for paints and varnishes - Determination of solvents in waterthinnable coating materials - Gas chromatographic method
- DIN EN 13358:2019 Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
- DIN EN 13358:2019-09 Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes; German version EN 13358:2019
- DIN 52045-1:2015-08 Bitumen and bituminous binders - Evaporation test - Part 1: Testing of petroleum cut-back bitumen
- DIN EN 15626:2016 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
- DIN EN 15626:2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method; German version EN 15626:2009
- DIN EN ISO 4973:2022-11 Cosmetics - Microbiology - Quality control of culture media and diluents used in Cosmetics standards (ISO/DIS 4973:2022); German and English version prEN ISO 4973:2022 / Note: Date of issue 2022-09-30
RU-GOST R, diluent ph
- GOST 31089-2003 Household solvents (diluents) for paint coating materials. General specifications
- GOST 11504-1973 Petroleum bitumens. Method for determination of diluent quantity vaporized from liquid bitumens
- GOST EN 13358-2013 Bitumens and bituminous binders. Determination of the distillation characteristics of cut-back and fluxed with mineral fluxes bituminous binders
US-GSA, diluent ph
International Organization for Standardization (ISO), diluent ph
- ISO 8655-4:2022 Piston-operated volumetric apparatus — Part 4: Dilutors
- ISO 3262-3:2023 Extenders — Specifications and methods of test — Part 3: Blanc fixe
- ISO 6887:1983 Microbiology - General Guidance for the Preparation of Dilutions for Microbiological Examination First Edition
- ISO 22518:2019 Paints and varnishes — Determination of solvents in water-thinnable coating materials — Gas-chromatographic method
- ISO 9555-4:1992 Measurement of liquid flow in open channels; tracer dilution methods for the measurement of steady flow; part 4: fluorescent tracers
- ISO 9555-3:1992 Measurement of liquid flow in open channels; tracer dilution methods for the measurement of steady flow; part 3: chemical tracers
- ISO 9555-2:1992 Measurement of liquid flow in open channels; tracer dilution methods for the measurement of steady flow; part 2: radioactive tracers
- ISO 8261:2001 Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination
- ISO 9555-1:1994 Measurement of liquid flow in open channels - Tracer dilution methods for the measurement of steady flow - Part 1: General
IN-BIS, diluent ph
Henan Provincial Standard of the People's Republic of China, diluent ph
Military Standard of the People's Republic of China-General Armament Department, diluent ph
- GJB 3459A-2021 Specification for military solvent-diluted protective penetrating oils
- GJB 3459-1998 Specification for military solvent-diluted protective penetrating oils
- GJB 2589.22A-2021 Test methods for physical and chemical properties of military leather fur Part 22: Determination of pH and dilution difference
- GJB 3459-1998(XG1-2015) Modification sheet 1-2015 to specifications for military solvent-diluted protective penetrating oil
ES-UNE, diluent ph
- UNE-EN 13074-1:2019 Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation
- UNE-EN 13074-2:2019 Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilization after recovery by evaporation
- UNE-EN ISO 22518:2021 Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019)
- UNE-EN 13358:2020 Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
- ISO 4973:2023 Cosmetics — Microbiology — Quality control of culture media and diluents used in cosmetics standards
Sichuan Provincial Standard of the People's Republic of China, diluent ph
- DB51/T 1769-2014 Limits of harmful substances in thinners for solvent-based wood coatings
Professional Standard - Petrochemical Industry, diluent ph
- SH/T 0105-1992 Method for Determination of Oil Film Thickness of Solvent Diluted Antirust Oil
FI-SFS, diluent ph
Association Francaise de Normalisation, diluent ph
- NF EN 13074-2:2019 Bitumes et liants bitumineux - Récupération du liant d'une émulsion bitumineuse ou d'un bitume fluidifié ou fluxé - Partie 2 : stabilisation après récupération par évaporation
- NF T31-110:1988 EXTENDERS. NATURAL SILICA FOR PAINT INDUSTRY. SPECIFICATIONS AND TEST METHODS.
- NF X41-580-5:2006 Wood preservatives - physicochemical testing - Part 5 : dilution testing.
- NF EN ISO 22518:2020 Peintures et vernis - Détermination des solvants dans des peintures diluables à l'eau - Méthode par chromatographie en phase gazeuse
- NF T30-311*NF EN ISO 22518:2020 Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method
- NF T31-210-1*NF EN ISO 8780-1:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 1 : introduction.
- NF L16-104:1990 Aerospace industry. Paints and varnishes. Determination of the phosphoric acid content of a reactive diluent.
- NF T31-220-3*NF EN ISO 8781-3:1995 Pigments and extenders. Methods of assessment of dispersion characteristics. Part 3 : assessment from the change in gloss.
- NF T72-230:1988 WATER-MISCIBLE,NEUTRALIZABLE ANTISEPTICS AND DISINFECTANTS USED IN LIQUID FORM. DETERMINATION OF SPORICIDAL ACTIVITY. DILUTION-NEUTRALIZATION METHOD.
- NF T31-311-2*NF EN 14469-2:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2 : preparation of test specimens
- NF T66-003*NF EN 13358:2019 Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
- NF T31-111:1991 EXTENDERS. THERMALY TREATED SILICA FOR PAINT INDUSTRY. SPECIFICATIONS AND TEST METHODS.
- NF ISO 9555-3:1994 Mesure de débit des liquides dans les canaux découverts - Méthodes de dilution en régime permanent utilisant des traceurs - Partie 3 : traceurs chimiques.
- NF T66-003:2010 Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes.
- NF T31-311-4*NF EN 14469-4:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4 : determination of bleeding of colouring materials
- NF T31-210-4*NF EN ISO 8780-4:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 4 : dispersion using a bead mill.
- NF ISO 9555-2:1994 Mesure de débit des liquides dans les canaux découverts - Méthodes de dilution en régime permanent utilisant des traceurs - Partie 2 : traceurs radioactifs.
- NF T66-043-1*NF EN 15626:2017 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
- NF EN 13358:2019 Bitumes et liants bitumineux - Détermination des caractéristiques de distillation des bitumes fluidifiés et fluxés par des fluxants d'origine minérale
- NF ISO 9555-4:1994 Mesure de débit des liquides dans les canaux découverts - Méthodes de dilution en régime permanent utilisant des traceurs - Partie 4 : traceurs fluorescents.
- NF U47-107:2004 Animal health analysis methods - Guidelines for antimicrobial susceptibility testing with the agar diffusion method.
- NF T31-210-6*NF EN ISO 8780-6:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 6 : dispersion using a triple-roll mill.
- NF T31-210-5*NF EN ISO 8780-5:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 5 : dispersion using an automatic muller.
- NF V08-010:1996 MICROBIOLOGY OF FOOD ANIMAL FEEDING STUFFS. GENERAL RULES FOR PREPARATION OF DILUTIONS FOR MICROBIOLOGICAL EXAMINATION.
- NF ISO 9555-1:1994 Mesure de débit des liquides dans les canaux découverts - Méthodes de dilution en régime permanent utilisant des traceurs - Partie 1 : généralités.
CU-NC, diluent ph
- NC 26-134-2-1987 Drugs. Veterinary Drugs. Diluent for Lyoohilized "New Castle La Sota" Vaccine Quality Specifications
卫生健康委员会, diluent ph
- WS/T 798-2022 Standard application of dilution method for qualitative testing of disinfectant efficacy
Lithuanian Standards Office , diluent ph
- LST EN 15322-2013 Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
- LST EN 15322-2009 Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
- LST EN ISO 22518:2021 Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019)
- LST EN 13358-2010 Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
- LST EN 14733-2005+A1-2011 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
- LST EN 15626-2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
Anhui Provincial Standard of the People's Republic of China, diluent ph
- DB34/T 4100-2022 Technical Requirements for Recycling of Flat Panel Displays by Diluent Distillation
U.S. Air Force, diluent ph
European Committee for Standardization (CEN), diluent ph
- EN ISO 3262-3:2023 Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
- EN 15322:2013 Bitumen and bituminous binders - Framework for specifying cutback and fluxed bituminous binders
- EN ISO 22518:2020 Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019)
- EN ISO 8780-1:1995 Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 1: Introduction (ISO 8780-1 : 1990)
- EN 15626:2016 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
- EN 13900-1:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction
- EN ISO 8781-3:1995 Pigments and Extendens - Methods of Assessment of Dispersion Characteristics - Part 3: Assessment from the Change in Gloss (ISO 8781-3: 1990)
Danish Standards Foundation, diluent ph
- DS/EN 15322:2013 Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
- DS/EN 13358:2010 Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
- DS/EN 15626:2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
SE-SIS, diluent ph
- SIS SS 15 02 14-1992 Petroleum products — Determination of gasoline diluent in used gasoline engine oils by distillation
IT-UNI, diluent ph
- UNI EN ISO 22518:2021 Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method
AT-ON, diluent ph
- OENORM EN ISO 22518:2021 Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019)
CH-SNV, diluent ph
- SN EN ISO 22518:2021 Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gaschromatographic method (ISO 22518:2019)
CEN - European Committee for Standardization, diluent ph
- PREN 13358-2018 Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
- EN 15626:2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, diluent ph
- GB/T 34682-2017 Determination of volatile organic compound(VOC) content in reactive diluent containing coatings
American National Standards Institute (ANSI), diluent ph
- ANSI/ASTM D6471:1999 Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service