ZH
RU
ES

poor peak resolution

poor peak resolution, Total:496 items.

In the international standard classification, poor peak resolution involves: Installations in buildings, Products of the chemical industry, Pumps, Adhesives, Insulation, Rubber, Agricultural machines, implements and equipment, Plastics, Equipment for the chemical industry, Ferrous metals, Organic chemicals, Construction materials, Analytical chemistry, Cutting tools, Switchgear and controlgear, Sugar. Sugar products. Starch, Particle size analysis. Sieving, Equipment for processing of minerals, Fluid power systems, Geology. Meteorology. Hydrology, Water quality, Electrical engineering in general, Coals, Rubber and plastics products, Vocabularies, Testing of metals, Air quality, Fluid storage devices, Radiation measurements, Astronomy. Geodesy. Geography, Pulps, Valves, Radiocommunications, Packaging materials and accessories, Sacks. Bags, Non-ferrous metals, Aircraft and space vehicles in general, Inorganic chemicals, Cases. Boxes. Crates, Packaging and distribution of goods in general, Elements of buildings, Electrical accessories, Space systems and operations, Wastes, Textile fibres, Protection against fire, Raw materials for rubber and plastics, Printed circuits and boards, Safety of machinery, Ergonomics, Protection of and in buildings, Road vehicle systems, Radiation protection, Electronic components in general, Cinematography, Mechanical testing, Audio, video and audiovisual engineering, Metalliferous minerals, Iron and steel products, Telecommunication systems, Semiconducting materials, Nuclear energy engineering, Leather technology, Lifting equipment, Spices and condiments. Food additives, Fertilizers, Optics and optical measurements, Optical equipment, Insulating fluids, Electrical wires and cables, Paints and varnishes, Ferroalloys, Ventilators. Fans. Air-conditioners, Chipless working equipment, Paint ingredients, Medical equipment, Earthworks. Excavations. Foundation construction. Underground works, Farming and forestry, Products of the textile industry, Semiconductor devices, Dentistry, Body care equipment.

BE-NBN, poor peak resolution

NBN T 63-123-1980 Surface active agents - Analysis of soaps - Determination of low contents of free glycerol - Spectrophotometric method
NBN EN ISO 2871-2:1995 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2 : Cationic- active matter of low molecular mass (between 200 and 500) (ISO 2871-2:1990)
NBN-ISO 2272:1990 Surface active agents - Soaps - Determination of low contents of free glycerol by molecular absorption spectrometry

AT-ON, poor peak resolution

ONORM C 9444-1984 Testing of elastomers; analysis of multi-peak traces obtained in fear-, adhesion- and peel tests
ONORM EN 28510-1-1993 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90° peel (ISO 8510-1:1990)
ONORM EN 28510-2-1993 Adhesives - Peel test for a flexible-bonded-to-ngid test specimen assembly - Part 2: 180° peel (ISO 8510-2:1990)

German Institute for Standardization, poor peak resolution

DIN VDE 0418-4:1967 Specifications for electric integrating meters; Maximum demand indicators
DIN ISO 6133:2004 Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998)
DIN 10756:2009 Analysis of honey - Determination of free acidity
DIN 10756:2021 Analysis of honey - Determination of free acidity
DIN ISO 6133:2017 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:2015)
DIN 10756:2021-03 Analysis of honey - Determination of free acidity
DIN EN ISO 10304-4:1999 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:1997); German version EN ISO 10304-4:1999
DIN 66120:1983 Particle size analysis; size analysis by air classification with centrifugal counterflow classifier
DIN 66120:2016 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
DIN EN ISO 28921-2:2017-05 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015); German version EN ISO 28921-2:2017
DIN EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens English version of DIN EN 14488-3:2006-09
DIN 66120:2016-10 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
DIN 55571-2:2016 Hot-Tack - Part 2: Peel strength measuring devices
DIN 55571-2:2021 Hot-Tack - Part 2: Peel strength measuring devices
DIN 55571-2:2021-07 Hot-Tack - Part 2: Peel strength measuring devices
DIN EN 1875-3:2023-04 Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation); German version EN 1875-3:2023
DIN EN 1875-3:2023 Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation)
DIN EN ISO 21028-1:2017-01 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016); German version EN ISO 21028-1:2016
DIN EN 14488-3:2021-05 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German and English version prEN 14488-3:2021 / Note: Date of issue 2021-04-09*Intended as replacement for DIN EN 14488-3 (2006...
DIN EN 14488-3:2006-09 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German version EN 14488-3:2006 / Note: To be replaced by DIN EN 14488-3 (2021-05).
DIN EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
DIN SPEC 43629-4:2017 Cable distribution cabinet - Part 4: Cable distribution cabinet with low construction depth
DIN SPEC 43629-4:2017-09 Cable distribution cabinet - Part 4: Cable distribution cabinet with low construction depth
DIN EN 28510-1:1993 Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 1: 90° peel (ISO 8510-1:1990); German version EN 28510-1:1993
DIN EN 28510-1:2014 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90° peel; German version EN 28510-1:2014
DIN EN ISO 28921-1:2022-09 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022); German version EN ISO 28921-1:2022
DIN EN ISO 2871-2:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010); German version EN ISO 2871-2:2010
DIN ISO 2115:2001 Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature (ISO 2115:1996)
DIN ISO 2115:2001-04 Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature (ISO 2115:1996)
DIN EN ISO 8510-2:2010-12 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006); German version EN ISO 8510-2:2010
DIN EN ISO 21028-2:2018-07 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018); German version EN ISO 21028-2:2018
DIN 53345-2:1978 Testing of fat liquors and greases for leather; methods of analysis, determination of ionity
DIN ISO 9022-5:1999 Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure (ISO 9022-5:1994)
DIN EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013
DIN EN ISO 10304-4:1999-07 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:1997); German version EN ISO 10304-4:1999 / Note: To be replaced ...
DIN EN ISO 10304-4:2021-08 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO/DIS 10304-4:2020); German and English version prEN ISO 10304-4:2020 / Not...
DIN ISO 48-3:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN 54407:2015 Testing of ion exchange resins - Determination of bead size distribution
DIN 54407:2003 Testing of ion exchange resins - Determination of bead size distribution
DIN 23006-5:2005 Preparation of hard coal - Assessment of preparation equipment and processes - Part 5: Size reduction and dissociation
DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN 66111 Beiblatt 1:1989-02 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN EN ISO 21028-1:2017 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016); German version EN ISO 21028-1:2016

Professional Standard - Machinery, poor peak resolution

JB/T 9073-2016 Centrifugal cryogenic liquid pumps used for air separation plants
JB/T 9073-1999 Centrifugal cryogenic liquid pumps used for air separation plants
JB/T 53143-1999 Product quality classification of centrifugal cryogenic liquid pumps for air separation equipment
JB/T 6896-2007 Surface cleanliness of air separation plants
JB/T 6418-2010 Separating machine.Measurement method of cleanliness
JB/T 6418-1992 Method for Determination of Cleanliness of Separation Machinery
JB/T 6896-1993 Surface Cleanliness of Air Separation Plants
JB/T 53155-1999 Quality classification of cryogenic globe valves and throttle valves for air separation equipment
JB/T 9081-2016 Cryogenic shutoff valves and throttle valves used for air separation plants.Specifications
JB/T 9081-1999 Specifications for cryogenic shutoff valves and throttle valves used for air separation plants
JB/T 9426.3-2011 Lenses for motion picture camera.Part 3：Distance and aperture scale markings

British Standards Institution (BSI), poor peak resolution

BS EN 1944:1996 Self adhesive tapes - Measurement of unwind adhesion at low speed
BS ISO 19830:2015 Surface chemical analysis. Electron spectroscopies. Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
BS ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS ISO 6133:2015 Tracked Changes. Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS ISO 13318-3:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods - Centrifugal X-ray method
BS 6829-1.2:1988 Analysis of surface active agents (raw materials). General methods. Method for determination of free alkalinity or free acidity
BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
BS 6829 Sec.1.2:1988 Analysis of surface active agents (raw materials). General methods. Method for determination of free alkalinity or free acidity
BS ISO 20411:2018 Surface chemical analysis. Secondary ion mass spectrometry. Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
BS ISO 19935-3:2021 Plastics. Temperature modulated DSC. Separation of overlapping thermal transitions
BS EN IEC 60947-3:2021 Low-voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors and fuse-combination units
BS EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Cationic-active matter of low molecular mass (between 200 and 500)
BS PD ISO/TR 19473:2015 Space systems. Best practices for orbit elements at payload. LV separation
21/30404487 DC BS ISO 923. Coal. Density separation equipment for coal. Performance evaluation
BS ISO 923:2022 Tracked Changes. Coal. Density separation equipment for coal. Performance evaluation
BS ISO 17862:2013 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
18/30361074 DC BS EN 60947-3. Low-voltage switchgear and controlgear. Part 3. Switches, disconnectors, switch-disconnectors and fuse-combination units
22/30426767 DC BS ISO 5146. Coal preparation plant. Density tracer testing for measuring performance of coal density separators
21/30433501 DC BS EN 14488-3. Testing sprayed concrete - Part 3. Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
BS ISO 13084:2011 Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
14/30312641 DC BS HD 60364-4-46. Low-voltage electrical installations. Part 4-46. Protection for safety. Isolation and switching
20/30383740 DC BS ISO 19935-3. Plastics. Temperature modulated DSC. Part 3. Separation of overlapping thermal transitions
BS ISO 13084:2018 Tracked Changes. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
BS EN 1093-6+A1:1999 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Separation efficiency by mass, unducted outlet
BS EN 1093-6:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Separation efficiency by mass, unducted outlet
22/30457209 DC BS IEC 60947-3 Ed.4.0 AMD1. Low-voltage switchgear and controlgear - Part 3. Switches, disconnectors, switch-disconnectors and fuse-combination units
BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS ISO 12406:2010 Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of arsenic in silicon
BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results

Korean Agency for Technology and Standards (KATS), poor peak resolution

KS C 0703-1981(1997) CRITERIONS FOR INSULATION OF HOUSEHOLD APPLIANCES AND EQUIPMENT
KS C 0703-1981 CRITERIONS FOR INSULATION OF HOUSEHOLD APPLIANCES AND EQUIPMENT
KS D ISO 15349-1-2005(2015) Unalloyed steel－Determination of low carbon content－Part 1：Infrared absorption method after combustion in an electric resistance furnace(by peak separation)
KS M ISO 2272:2007 Surface active agents－Soaps－Determination of low contents of free glycerol by molecular absorption spectrometry
KS B ISO 21028-1:2006 Cryogenic vessels-Toughness requirements for material at cryogenic temperature-Part 1:Temperatures below-80 ℃
KS B ISO 21028-1:2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS A ISO 13318-2-2014(2019) Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 2: Photocentrifuge method
KS B ISO 21028-1-2017(2022) Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS M ISO 5263-2:2009 Pulps-Laboratory wet disintegration-Part 2:Disintegration of mechanical pulps at 20 ℃
KS M ISO 5263-3:2009 Pulps－Laboratory wet disintegration－Part 3：Disintegration of mechanical pulps at ≥85 ℃
KS M ISO 8510-1:2012 Adhesives-Peel test for a flexible-bonded-to-rigid test specimen assembly-Part 1:90 ° peel
KS M ISO 8510-2:2012 Adhesives－Peel test for a flexible-bonded-to-rigid test specimen assembly－Part 2：180° peel
KS T 1021-2018 Standard boxes and containers for cold chain logistics of agricultural products
KS T 1026-2006(2011) Standard packaging container of sap for low temperature distribution
KS M ISO 2871-2:2007 Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
KS M ISO 2871-2-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
KS M ISO 15825-2017(2022) Rubber compounding ingredients－Carbon black－Determination of aggregate size distribution by disc centrifuge photosedimentometry
KS B ISO 21028-2:2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
KS M ISO 2272-2007(2022) Surface active agents－Soaps－Determination of low contents of free glycerol by molecular absorption spectrometry
KS M ISO 2272-2007(2017) Surface active agents－Soaps－Determination of low contents of free glycerol by molecular absorption spectrometry
KS M ISO 2871-2-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
KS B ISO 21028-2-2006(2016) Cryogenic vessels－Toughness requirements for materials at cryogenic temperature－Part 2：Temperatures between －80 ℃ and －20℃
KS D ISO 18114:2005 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials
KS I ISO 10304-4-2008(2018) Water quality－Determination of dissolved anions by liquid chromatography of ions－Part 4：Determination of chlorate, chloride and chlorite in water with low contamination
KS D ISO 18114-2005(2020) Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials
KS D ISO 17560-2003(2018)
KS B ISO 21028-2:2006 Cryogenic vessels-Toughness requirements for materials at cryogenic temperature-Part 2:Temperatures between -80 ℃ and -20℃
KS M ISO 5267-2:2017 Pulp－Determination of drainability－Part 2: “Canadian Stanard” freeness method
KS P ISO 19448:2021 Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode

Association Francaise de Normalisation, poor peak resolution

NF P18-511-3*NF EN 14488-3:2006 Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
NF T46-055:2005 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength.
NF ISO 6133:2015 Caoutchouc et plastiques - Analyse des tracés multi-pics obtenus lors des déterminations de la résistance au déchirement et de la force d'adhérence
NF E75-232:1993 Abrasive grains. Sampling and splitting.
NF T46-055*NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
NF EN IEC 60947-3:2021 Appareillage à basse tension - Partie 3 : interrupteurs, sectionneurs, interrupteurs-sectionneurs et combinés-fusibles
NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.
NF C20-040-5:2004 Insulation coordination for equipment within low-voltage systems - Part 5 : a comprehensive method for determining clearances and creepage distances equal to or less than 2 mm.
NF A11-102:1977 Chemical analysis of ferroniobium.Spectrophotometric determination of niobium after separation on ion exchange resins.
NF EN ISO 21028-1:2016 Récipients cryogéniques - Exigences de ténacité pour les matériaux à température cryogénique - Partie 1 : températures inférieures à - 80 oC
NF E29-490-2*NF EN ISO 28921-2:2017 Industrial valves - Isolating valves for low-temperature applications - Part 2 : type testing
NF EN ISO 28921-2:2017 Robinetterie industrielle - Robinets d'isolement pour application à basses températures - Partie 2 : essais de type
NF E86-506-1*NF EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1 : temperatures below - 80 oC
NF EN ISO 2871-2:2010 Agents de surface - Détergents - Détermination de la teneur en matière active cationique - Partie 2 : matière active cationique à faible masse moléculaire (entre 200 et 500)
NF T73-320-2*NF EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
NF EN ISO 8510-2:2011 Adhésifs - Essai de pelage pour un assemblage collé flexible-sur-rigide - Partie 2 : pelage à 180 degrés
NF T73-321:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
NF C63-001-3*NF EN IEC 60947-3:2021 Low-voltage switchgear and controlgear - Part 3 : switches, disconnectors, switch-disconnectors and fuse-combination units
NF C63-130/A2*NF EN 60947-3/A2:2015 Low-voltage switchgear and controlgear - Part 3 : switches, disconnectors, switch-disconnectors and fuse-combination units
NF T76-096-1*NF EN 28510-1:2014 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1 : 90 o peel
NF E29-490-1:2013 Industrial valves - Isolating valves for low-temperatures applications - Part 1: design, manufacturing and production testing
NF ISO 2272:1989 Agents de surface - Savons - Dosage du glycérol libre en faibles teneurs par spectrométrie d'absorption moléculaire
NF ISO 23830:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Répétabilité et constance de l'échelle des intensités relatives en spectrométrie statique de masse des ions secondaires
NF EN ISO 10304-4:2022 Qualité de l'eau - Dosage des anions dissous par chromatographie des ions en phase liquide - Partie 4 : dosage des ions chlorate, chlorure et chlorite dans des eaux faiblement contaminées
NF C63-130:1993 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. PART 3 : SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS. (EUROPEAN STANDARD EN 60 947-3).
NF EN ISO 28921-1:2022 Robinetterie industrielle - Robinets d'isolement pour application à basses températures - Partie 1 : conception, essais de fabrication et de production
NF T20-581:1965 Chemical analysis of ammonium nitrate for technical use. Determination of free acidity.
NF T60-311*NF ISO 2272:1989 Surface active agents. Soaps. Determination of low contents of free glycerol by molecular absorption spectrometry.
NF E29-490-1*NF EN ISO 28921-1:2017 Industrial valves - Isolating valves for low-temperature applications - Part 1 : design, manufacturing and production testing
NF EN 61857-1:2009 Systèmes d'isolation électriques - Procédures d'évaluation thermique - Partie 1 : exigences générales - Basse tension
NF EN ISO 21028-2:2018 Récipients cryogéniques - Exigences de ténacité pour les matériaux à température cryogénique - Partie 2 : températures comprises entre -80 oC et -20 oC
NF A06-371:1984 Chemical analysis of steel. Molecular absorption spectrophotometric determination of zirconium (after separation by extraction).
NF T20-575:1966 Chemical analysis of ammonium sulphate for technical use. Spectrophotometric determination of chloride ions.
NF E52-201:1986 Lifting accessories. Static strength tests of detached lifting accessories.
NF C20-040-5:2008 Insulation coordination for equipment within low-voltage systems - Part 5 : comprehensive method for determining clearances and creepage distances equal to or less than 2 mm.
NF C63-079:1981 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. DEFINITIONS,CLASSIFICATION AND DESIGNATION. (EUROPEAN STANDARD EN 50 032).
NF T20-741:1967 Chemical analysis of maleic and phthalic anhydrides. Potentiometric determination of free acidity.
NF P84-502-2:1993 Géomembranes - Essais sur joints - Partie 2 : détermination de la résistance en traction-pelage.
NF T90-049*NF EN ISO 10304-4:2022 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4 : determination of chlorate, chloride and chlorite in water with low contamination
NF E86-506-2*NF EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2 : temperatures between -80 oC and -20 oC
NF EN 14488-3:2006 Essais pour béton projeté - Partie 3 : résistances à la flexion (au premier pic, ultime et résiduelle) d'éprouvettes parallélépipèdiques en béton renforcé par des fibres

European Committee for Standardization (CEN), poor peak resolution

EN 1944:1996 Self adhesive tapes - Measurement of unwind adhesion at low speed
prEN ISO 21028-1 rev Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
EN 1252-2:2001 Cryogenic Vessels - Materials - Part 2: Toughness Requirements for Temperatures between -80 degrees C and -20 Degrees C
EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
EN 1252-1:1998/AC:1998 Cryogenic Vessels - Materials - Part 1: Toughness Requirements for Temperatures Below - 80 Degrees C Ratified European Text
EN 1252-1:1998 Cryogenic vessels Materials Part 1: Toughness requirements for temperatures below p80 °C (Incorporating corrigendum December 1998)
EN ISO 28921-2:2017 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing
EN ISO 28921-1:2017 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
EN ISO 28921-1:2022 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022)
prEN 14488-3-2021 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method
EN ISO 13304-2:2022 Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation - Part 2: Ex vivo human tooth enamel dosimetry (ISO 13304-2:2020)
EN ISO 2871-2:1994 Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 2: Cationic-Active Matter of Low Molecular Mass (Between 200 and 500) (ISO 2871-2:1990)
EN 2997-11:1997 Aerospace Series - Connectors, Electrical, Circular, Coupled by Threaded Ring, Fire-Resistant or Non Fire-Resistant, Operating Temperatures 175 Degrees Celsius Continuous, 200 Degrees Celsius Continuous, 260 Degrees Celsius Peak - Part 11: Dummy Rece
EN 2997-5:1997 Aerospace Series - Connectors, Electrical, Circular, Coupled by Threaded Ring, Fire-Resistant or Non Fire-Resistant, Operating Temperatures 175 Degrees Celsius Continuous, 200 Degrees Celsius Continuous, 260 Degrees Celsius Peak - Part 5: Hermetic Sq
EN 16318:2013+A1:2016 Fertilizers and liming materials - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)

North Atlantic Treaty Organization Standards Agency, poor peak resolution

STANAG 7012-1995 MINIMUM RADIOTELEPHONY (R/T) AERODROME DEPARTURE PROCEDURES

International Organization for Standardization (ISO), poor peak resolution

ISO 2272:1972 Surface active agents — Analysis of soaps — Determination of low contents of free glycerol spectrophotometric method
ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 19830:2015 Surface chemical analysis - Electron spectroscopies - Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 13318-2:2001 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method
ISO 13318-2:2007 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method
ISO 13318-3:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 3: Centrifugal X-ray method
ISO 923:2022 Coal — Density separation equipment for coal — Performance evaluation
ISO 21028-1:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C
ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
ISO 28921-2:2015 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing
ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
ISO 2871-2:1990 Surface active agents; detergents; determination of cationic-active matter content; part 2: cationic active matter of low molecular mass (between 200 and 500)
ISO 19935-3:2021 Plastics - Temperature modulated DSC - Part 3: Separation of overlapping thermal transitions
ISO 28921-1:2022 Industrial valves — Isolating valves for low-temperature applications — Part 1: Design, manufacturing and production testing
ISO 13304-2:2020 Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Part 2: Ex vivo human tooth enamel dosimetry
ISO 21028-2:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between - 80 °C and - 20 °C
ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C
ISO/CD 21028-1:2011 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C
ISO 2272:1989 Surface active agents; soaps; determination of low contents of free glycerol by molecular absorption spectrometry
ISO 28921-1:2013 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing
ISO 20411:2018 Surface chemical analysis - Secondary ion mass spectrometry - Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
ISO 2115:1996 Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature
ISO/FDIS 5146:2023 Coal and coke — Coal preparation plant — Density tracer testing for measuring performances of coal density separators
ISO 5146:2023 Coal and coke — Coal preparation plant — Density tracer testing for measuring performances of coal density separators
ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
ISO 18114:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
ISO 18114:2021 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
ISO 10304-4:2022 Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 4: Determination of chlorate, chloride and chlorite in water with low contamination
ISO 16531:2020 Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
ISO 12406:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of arsenic in silicon
ISO/CD 13318-1 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles and guidelines
ISO 17560:2014 Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth profiling of boron in silicon
ISO/DIS 13318-1:2023 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles and guidelines
ISO 8916:1988 Ethylene for industrial use; determination of traces of polar compounds; preparation of condensate samples by low-temperature scrubbing technique
ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, poor peak resolution

GB/T 12833-1991 Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 10606.6-1989 Terminology of air separation plant--Cryogenic liquid pump
GB/T 42342.2-2023 Liquid Phase Centrifugal Sedimentation Method for Particle Size Distribution Part 2: Photoelectric Centrifugal Method
GB/T 10606.4-1989 Terminology of air separation plant--Cryogenic liquid storage and transportation equipment
GB/T 24975.2-2010 Guide of environmental design for low-voltage apparatus- Part 2:Disconnectors
GB/T 14634.2-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 2:Determination of emission dominantpeak and chromaticity
GB/T 223.41-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
GB 223.41-1985 Iron and steel and alloy chemical analysis method ion exchange separation-pyrogallol photometric determination of tantalum content
GB/T 223.40-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content
GB 14048.3-2002 Low-voltage switchgear and controlgear Part 3: Switches,disconnectors,switch-disconnectors and fuse-combination units
GB 14048.3-2008 Low-voltage switchgear and controlgear.Part 3:Switches,disconnectors,switch-disconnectors and fuse-combination units
GB/T 223.42-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalum content
GB 223.42-1985 Chemical analysis method of iron, steel and alloy Ion exchange separation of bromide o Glycinol red photometric method for determination of tantalum content
GB/T 6909.2-1986 Methods for analysis of water for boiler and for cooling--The determination of hardness--Low hardness
GB/T 10305-1988 Test method for particle distribution of cathode carbonates by centrifugation sedimentation
GB/T 6730.46-2006 Iron ores Determination of arsenic content Arseno-molybdenum blue spectrophotometric method after the distillation separation
GB/T 20564.14-2023 High-strength cold-rolled steel sheets and strips for automobiles—Part 14: Low-density steels
GB/T 6730.45-2006 Iron ores Determination of arsenic content Arseno-molybdenum blue spectrophotometric method after hydrogen arsenide separation
GB/T 223.31-2008 Iron,steel and alloy.Determination of arsenic content.Distillation-molybdenum blue spectrophotometric method
GB/T 25186-2010 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of relative sensitivity factors from ion-implanted reference materials
GB/T 2904-1982 Nickel-Chromium/Gold-Iron,Copper/Gold-Iron low temperature thermocouple wires and their reference tables
GB/T 4702.7-2016 Chromium metal.Determination of nitrogen content.Distillation-nessler reagent spectrophotometric method
GB/T 6730.46-1986 Methods for chemical analysis of iron ores--The extraction separation-molybdenum blue photometric method for the determination of arsenic content
GB/T 32551-2016(英文版) Fluorspar powder in bulk—Determination of transportable moisture limits—Flow《Arial》table method
GB/T 20564.4-2022 Continuously cold rolled high strength steel sheet and strip for automobile—Part 4：High strength low alloy steel
GB/T 20564.4-2010 Continuously cold rolled high strength steel sheet and strip for automobile.Part 4:High strength low alloy steel
GB/T 223.31-1994 Methods for chemical analysis of iron, steel and alloy.The distillation-molybdenum blue spectrophotometric method for the determination of arsenic content
GB/T 10267.6-1988 Method for analysis of calcium metal--The determination of iron,nickel,copper and manganese in calcium metal by atomic absorption spectrophotometry after extractive separation
GB 223.31-1984 Methods for chemical analysis of iron,steel and alloy--The distillation-molybdenum blue photometric method for the determination of arsenic content
GB/T 6730.24-2006 Iron ores Determination of total rare earth contentd Chlorophosphonazo mA spectrophotometric method
GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results
GB/T 17593-1998 Textiles--Test method of heavy metal ions--Atomic absorption spectrophotometry
GB/T 7494-1987 Water quality--Determination of anionic surfactants--Methylene blue spectrophotometric method

Indonesia Standards, poor peak resolution

SNI 0834.2-2008 Paddy separators machines - Part 2: Minimum performance

SE-SIS, poor peak resolution

SIS SS 24 21 23-1982 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
SIS SMS-187-1928

AENOR, poor peak resolution

UNE 53612:1984 RUBBER-ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH
UNE 35054-1:1985 FERRONIOBIUM. SPECTROPHOTOMETRIC DETERMINATION OF NIOBIUM AFTER SEPARATION ON ION EXCHANGE RESIUS
UNE-HD 60364-4-46:2017/A11:2017 Low-voltage electrical installations - Part 4-46: Protection for safety - Isolation and switching
UNE-HD 60364-4-46:2017 Low-voltage electrical installations - Part 4-46: Protection for safety - Isolation and switching
UNE 55725:1987 SURFACE ACTIVE AGENTS. DETERMINATION OF LOW CONCENTRATIONS OF NON-IONIC SUFACTANTS IN AQUEOUS MEDIA USING DRAGENDORFF REAGENT
UNE-EN 60947-3:2009/A1:2013 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
UNE-EN 60947-3:2009 Low-voltage switchgear and controlgear -- Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
UNE-EN ISO 21028-1:2017 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
UNE-EN 14488-3:2007 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
UNE 55905:1991 SURFACE ACTIVE AGENTS. SOAPS. DETERMINATION OF LOW CONTENTS OF FREE GLYCEROL BY MOLECULAR ABSORPTION SPECTROMETRY.
UNE-EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)

Group Standards of the People's Republic of China, poor peak resolution

T/YNSX 6-2020 High Molecular Weight High Density Polyethylene (HMWHDPE) Double Wave Wound Structural Wall Pipe
T/CECS 10143-2021 High Molecular Weight High Density Polyethylene (HMWHDPE) Dual-Crest Winding Structure Wall Drain Pipe
T/YNSX 006-2022 High molecular weight high density polyethylene (HMWHDPE) double crest reinforced reinforced winding structure wall drainage pipe
T/ZZB 1957-2020 Low line density ultra-high molecular weight polyethylene filament yarns
T/CSTM 00985-2023 Test method for the complex permittivity of low-loss dielectric plates－Split-cylinder resonator method
T/GXAF 0010-2023 Spectrophotometric method for the determination of free amino acid content in water-soluble fertilizers

NZ-SNZ, poor peak resolution

AS/NZS 3889:1993 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength
AS/NZS 1301.206S:2015 Methods of test for pulp and paper Part 206s: Freeness of pulp

ES-UNE, poor peak resolution

UNE-ISO 6133:2022 Rubber and plastics. Analysis of multi-peak traces obtained of determinations of tear strength and adhesion strength
UNE-EN ISO 28921-2:2018 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
UNE-EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
UNE-EN 1875-3:2023 Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation)
UNE-EN IEC 60947-3:2022 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
UNE-EN 60947-3:2009/A2:2016 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
UNE-EN 60947-3:2009 ERRATUM:2010 Low-voltage switchgear and controlgear -- Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
UNE-EN ISO 28921-1:2023 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022)
UNE-EN ISO 10304-4:2022 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:2022)

Military Standard of the People's Republic of China-General Armament Department, poor peak resolution

GJB 448-1988 Adhesive low temperature 90° peel strength test method (metal to metal)
GJB 599A-1993 General specification for environmentally resistant rapid separation high-density small circular electrical connectors
GJB 599-1988 General specification for environmentally resistant rapid separation high-density small circular electrical connectors
GJB 8671.13-2015 Test methods for metal cartridges Part 13: Low temperature strength test
GJB 3090-1997 Radar feeder subsystem performance test method power distribution ratio, isolation, air tightness
GJB 599B-2012 General specification for environment resistant quick disconnect high density miniature circular electrical connectors

Professional Standard - Coal, poor peak resolution

MT/T 807-1999 Separation of vitrinite group in bituminous coal
MT/T 932-2005 Test of density and moisture and sympathetic detonation of industrial explosive

American Society for Testing and Materials (ASTM), poor peak resolution

ASTM E611-92 Test Methods for Low Concentrations of Diethylene Glycol in Ethylene Glycol by Gas Chromatography
ASTM D5542-04(2009) Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM E1250-88(2005) Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
ASTM E1250-88(2000) Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
ASTM E1250-15 Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
ASTM E1438-06 Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
ASTM E1880-06 Standard Practice for Tissue Cryosection Analysis with SIMS
ASTM E1880-12 Standard Practice for Tissue Cryosection Analysis with SIMS
ASTM D3561-11 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D3561-16 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM F904-22 Standard Practice for Separation of Plies for Bond Strength of Laminated Flexible Materials

RO-ASRO, poor peak resolution

STAS 9475/2-1974 ION EXCHANGERS Size analysis
STAS 8179/3-1975 LOW-DENSITY POLYETHYLENE GRANULESMethods of analysis
STAS 9475/4-1974 ION EXCHANGERS Determination of water content and apparent density
STAS SR CEI 811-5-1-1995 Common test methods for insulating and sheathing materials of electric cables. Part 5: Methods specific to filing compounds. Section One: Drop-point-Separation of oil-Lower temperature brittleness Total acrd number-Absence of corrosive components-Permitiv

YU-JUS, poor peak resolution

JUS G.S2.152-1985 Rubber and plastics. Analysis of multi-peak traces obtained in determination of tear strength and adhesion strength

Danish Standards Foundation, poor peak resolution

DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
DS/EN 60947-3/A1:2012 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
DS/EN IEC 60947-3:2021 Low-voltage switchgear and controlgear – Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
DS/EN 60947-3:2009 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
DS/EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
DS/EN ISO 8510-2:2011 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel
DS/EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
DS/EN ISO 10304-4:2000 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination
DS/EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple

Japanese Industrial Standards Committee (JISC), poor peak resolution

JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6854-2:1999 Adhesives -- Determination of peel strength of bonded assemblies -- Part 2: 180 degree SIGN peel
JIS K 6854-1:1999 Adhesives -- Determination of peel strength of bonded assemblies -- Part 1: 90 degree SIGN peel
JIS Z 8823-2:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method
JIS Z 8823-2:2016 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method
JIS G 1211-4 AMD 1:2013 Iron and steel.Determination of carbon content.Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 1)
JIS G 1211-4 AMD 2:2017 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 2)
JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
JIS G 1211-4:2011 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating
JIS K 6854-3:1999 Adhesives -- Determination of peel strength of bonded assemblies -- Part 3: Adhesives -- 180 degree SIGN peel test for flexible-to-flexible bonded assemblies (T-peel test)
JIS B 9711:2002 Safety of machinery -- Minimum gaps to avoid crushing of parts of the human body
JIS G 1228-2:2022 Iron and steel -- Determination of nitrogen -- Part 2: Spectrophotometric methods after ammonium distillation separation
JIS K 0158:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
JIS K 0164:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of boron in silicon
JIS K 0163:2010 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of relative sensitivity factors from ion-implanted reference materials
JIS K 6828-2:2003 Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature
JIS K 5101-11-2:2004 Test methods for pigments -- Part 11: Density -- Section 2: Centrifugal degassing method
JIS K 0157:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
JIS G 1232-2:2021 Iron and steel -- Determination of zirconium -- Part 2: Xylenol orange spectrophotometric method after fluoride coprecipitation separation
JIS Z 8823-1:2001 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 1: General principles and guidelines

RU-GOST R, poor peak resolution

GOST 2327-1989 Low-voltage switches, switch-disconnectors. General technical specifications
GOST IEC 60664-5-2013 Insulation coordination for equipment within low-voltage systems. Part 5. Comprehensive method for determining clearances and creepage distance equal to or less than 2 mm
GOST 17038.2-1979 Ionizing-radiation scintillation detectors. Method for measurement of detector light yield of full absorption peak or compton distribution edge
GOST R 25645.157-1994 Earth's lower ionosphere. Model of global distribution of concentration and effective collision frequency of electrons for VLE-LF radio foreacast
GOST R 54892-2012 Installation of air separation plants and other cryogenic equipment. General provisions
GOST 26460-1985 Air separation products. Gases. Cryogens. Packing, marking, transportation and storage
GOST IEC 60754-3-2021 Test on gases evolved during combustion of materials from cables. Part 3. Measurement of low level of halogen content by ion chromatography
GOST 30011.3-1993 Low - voltage switchgrears and controlgears. Part 3. Switches, disconnectors, switch - disconnectores and fuse-combination units
GOST 25645.146-1989 Earth's ionosphere. Model of global distribution of concentration, temperature and effective collision frequency of electrons
GOST R 54351-2011 Food common salt. Determination of chlor-ion mass fraction by mercurymetric method
GOST R 50571-5-53-2013 Low-voltage electrical installations. Part 5-53. Selection and erection of electrical equipment. Isolation, switching and control
GOST R 50571.5.53-2013 Low-voltage electrical installations. Part 5-53. Selection and erection of electrical equipment. Isolation, switching and control

(U.S.) Ford Automotive Standards, poor peak resolution

FORD WSS-M2C218-A1-2021 DUAL CLUTCH TRANSMISSION FLUID, LOW VISCOSITY, AMBER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M1C214-A-2004 GREASE, LOW OIL SEPARATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C218-A2-2021 DUAL CLUTCH TRANSMISSION FLUID, LOW VISCOSITY, YELLOW ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2C218-A1)
FORD WSF-M4G356-A-1994 SEALANT, SILICONE RUBBER, TWO COMPONENT, LOW VISCOSITY, FORM IN PLACE

ZA-SANS, poor peak resolution

SANS 16133:2003 Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
SANS 163-1:1992 Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination
SANS 60947-3:2006 Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

GM Daewoo, poor peak resolution

GMKOREA EDS-T-4529-2011 Test Procedure of Headrest Separation Strength

CH-SNV, poor peak resolution

SNV 010 130-1931 Quality management and quality assurance Standards — Guidelines for selection and use

Association of German Mechanical Engineers, poor peak resolution

VDI 3870 Blatt 11-1996 Analysis of rainwater - Determination of free acidity
VDI 3677 Blatt 2-2004 Filtering separators - Depth fiber filters
VDI 2452 Blatt 2-1975 Gaseous air pollution measurement; determination of fluoric ion concentration; preseparation and electrometric detection
VDI 3869 Blatt 3-2010 Measurement of ammonia in ambient air - Sampling with diffusion separators (denuders) - Photometric or ion chromatographic analysis

Standard Association of Australia （SAA）, poor peak resolution

AS 2434.9:2000 Method for the analysis and testing of lower rank coal and its chars - Determination of four acid-extractable ions in lower rank coal
AS 5009.2:2003 Determination of particle size distribution by centrifugal liquid sedimentation methods - Photocentrifuge method
AS 2434.9:2000(R2013)
AS 5213:2019 Density tracer testing for measuring performance of coal density separators
AS 60947.3:2018 Low-voltage switchgear and controlgear, Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2015 (ED. 3.2) MOD)

Shaanxi Provincial Standard of the People's Republic of China, poor peak resolution

DB61/T 1294-2019 Determination of low-concentration sulfur dioxide in exhaust gas from stationary pollution sources Molecular sieve adsorption tube sampling-ion chromatography

未注明发布机构, poor peak resolution

BS 6319-9:1987(1999) Testing of resin compositions for use in construction — Part 9 : Method for measurement and classification of peak exotherm temperature
BS ISO 13318-3:2004(2007) Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 3 : Centrifugal X - ray method
BS EN ISO 28921-2:2017 Industrial valves — Isolating valves for low - temperature applications Part 2 : Type testing
BS EN IEC 60947-3:2021(2022) Low - voltage switchgear and controlgear Part 3 : Switches, disconnectors, switch - disconnectors and fuse - combination units
BS EN ISO 28921-1:2017 Industrial valves — Isolating valves for low - temperature applications Part 1 : Design, manufacturing and production testing
BS ISO 13318-1:2001(2002) Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1 : General principles and guidelines

International Electrotechnical Commission (IEC), poor peak resolution

IEC 60664-5:2003 Insulation coordination for equipment within low-voltage systems - Part 5: A comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
IEC 60947-3:2020 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2012 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2008 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:1999 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2005 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2015 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2008+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3/COR1:2013 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3/COR1:1999 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC TS 62561-8:2018 Lightning protection system components (LPSC) - Part 8: Requirements for components for isolated LPS
IEC 60947-3:2001 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:1990 Low-voltage switchgear and controlgear; part 3: switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2020/COR1:2021 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units; Corrigendum 1
IEC 60947-3/AMD1:2001 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units; Amendment 1
IEC 60947-3:2008/AMD2:2015 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units; Amendment 2
IEC 60947-3/AMD1/COR1:2013 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units; Corrigendum 1
IEC 60947-3/AMD1/COR1:2001 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units; Amendment 1
IEC 60947-3/AMD2:2005 Amendment 2 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2008/AMD1:2012/COR1:2012 Corrigendum 1 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3/AMD1:1994 Low-voltage switchgear and controlgear; part 3: switches, disconnectors, switch-disconnectors and fuse-combination units; amendment 1
IEC 60947-3:2008/AMD1:2012/COR1:2013 Amendment 1 - Corrigendum 1 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

American Welding Society (AWS), poor peak resolution

WRC 020:1955 Part 1: High-Strength Low Alloy Steels
WRC 213:1976 Part 1: Weldability of Niobium Containing High Strength Low Alloy Steel

National Sanitation Foundation (NSF), poor peak resolution

NSF MINERAL OIL-2004 High Viscosity, Class I Medium and Low Viscosity, Class II Medium and Low Viscosity, and Class III Medium and Low Viscosity (per the World Health Organization classification) ORAL RISK ASSESSMENT DOCUMENT

ES-AENOR, poor peak resolution

KR-KS, poor peak resolution

KS B ISO 21028-1-2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS B ISO 21028-2-2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
KS D ISO 17560-2003(2023)
KS M ISO 5267-2-2017 Pulp－Determination of drainability－Part 2: “Canadian Stanard” freeness method
KS P ISO 19448-2021 Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode

PL-PKN, poor peak resolution

PN C89286-02-1989 Polyethylene Iow density Classification and designation
PN-EN IEC 60947-3-2021-07 E Low-voltage switchgear and controlgear -- Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2020)
PN C04860-10-1991 Ion exchange resins. Testing methods. Determination of the total strong acidic and weak acidic exchange capacitias of cationites
PN C04860-05-1991 ?on exchange resins Testing methods Determination of granulometric composition (mesh analysis)

CENELEC - European Committee for Electrotechnical Standardization, poor peak resolution

PRHD 60364-4-46-2014 Low-voltage electrical installations - Part 4-46: Protection for safety - Isolation and switching

International Telecommunication Union (ITU), poor peak resolution

ITU-R F.613-1986 Use of Ionospheric Channel Sounding Systems Operating in the Fixed Service at Frequencies Below About 30 MHz - Section 3Ac - Influence of the Ionosphere
ITU-R F.613 FRENCH-1986 Use of Ionospheric Channel Sounding Systems Operating in the Fixed Service at Frequencies Below About 30 MHz - Section 3Ac - Influence of the Ionosphere
ITU-R F.613 SPANISH-1986 THE USE OF IONOSPHERIC CHANNEL SOUNDING SYSTEMS OPERATING IN THE FIXED SERVICE AT FREQUENCIES BELOW ABOUT 30 MHz

ETSI - European Telecommunications Standards Institute, poor peak resolution

TS 101 952-1-1-2002 Access Network xDSL Transmission Filters; Part 1: ADSL Splitters for European Deployment; Sub-Part 1: Specification of the Low Pass Part of ADSL/POTS Splitters (V1.1.1)
TS 101 952-2-1-2002 Access Network xDSL Transmission Filters; Part 2: ADSL Splitters for European Deployment; Sub-Part 1: Specification of the Low Pass Part of ADSL/POTS Splitters (V1.1.1)
TR 101 728-2002 Access and Terminals (AT); Study for the Specification of Low Pass Filter Section of POTS/ADSL Splitters (V1.2.1)
TR 101 953-1-1-2002 Access and Terminals (AT); Unified and Generic Testing Methods for European Specific DSL Splitters; Part 1: ADSL Splitters for European Deployment; Sub-Part 1: Specification of Testing Methods for Low Pass Part of ADSL/POTS Splitters (V1.1.1)
TR 101 953-2-1-2003 Access network xDSL transmission filters; Part 2: VDSL splitters for European deployment; Sub-part 1: Specification of Testing methods for low pass part of VDSL/POTS splitters (V1.1.1)

United States Navy, poor peak resolution

NAVY DOD-STD-2145 VALID NOTICE 1-1989 DISCONNECT SWITCH BOXES, CONTACTOR PANELS AND SWITCHBOARDS, LOW MAGNETIC FIELD DESIGN OF (METRIC)
NAVY DOD-STD-2145-1983 DISCONNECT SWITCH BOXES, CONTACTOR PANELS AND SWITCHBOARDS, LOW MAGNETIC FIELD DESIGN OF (METRIC)

Professional Standard - Aerospace, poor peak resolution

QJ 3272-2006 Detail specification for YF5 and YF8 vacuum separation low frequency electrical connectors for spacecraft

HU-MSZT, poor peak resolution

MI 14026/4-1971

General Motors Corporation (GM), poor peak resolution

GM 9985918-2003 Adhesive, One-Part, Antiflutter High Expansion, Low Strength
GM 9985996-1996 Adhesive, One-Part, Antiflutter, Low Expansion, High Strength
GM 9986085-1995 Adhesive, One-Part, 200% Expanding,Low Strength, Anti-Flutter

Professional Standard - Building Materials, poor peak resolution

JC/T 781-1989 Test method for delamination strength of honeycomb type core
JC/T 781-2006 Test method for delamiation strength of honeycomb core

National Metrological Verification Regulations of the People's Republic of China, poor peak resolution

JJG(电子) 12018-1988 Trial Verification Regulations for Model ZN3991 Dual Channel Separation Meter

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, poor peak resolution

GB/T 14048.3-2017 Low-voltage switchgear and controlgear—Part3: Switches，disconnectors，switch-disconnectors and fuse-combination units
GB/T 14048.3-2008 Low-voltage switchgear and controlgear - Part 3:Switches, disconnectors, switch-disconnectors and fuse-combination units
GB/T 35685.1-2017 Low-voltage switchgear and controlgear enclosed equipment—Part 1:Enclosed switch-disconnectors to provide isolation during repair and maintenance work

Hunan Provincial Standard of the People's Republic of China, poor peak resolution

DB43/T 1403-2018 Water Quality Determination of Ammonia Nitrogen-Gas-liquid Separation and Collection Spectrophotometry
DB43/T 1404-2018 Determination of total cyanide in water and soil by gas-liquid separation and collection spectrophotometry

Lithuanian Standards Office , poor peak resolution

LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
LST EN 14488-3-2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
LST EN 60947-3-2009 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2008)
LST EN IEC 60947-3:2021 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2020)
LST EN 60947-3-2009/A1-2012 Low-voltage switchgear and controlgear -- Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2008/A1:2012)
LST EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)
LST EN ISO 8510-2:2010 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006)

European Committee for Electrotechnical Standardization（CENELEC）, poor peak resolution

EN IEC 60947-3:2021 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

TH-TISI, poor peak resolution

TIS 1762.2-1999 Surface active agents.detergents.determination of cationic-active matter content.part 2 : cationic-active matter of low molecular mass (between 200 and 500)

Taiwan Provincial Standard of the People's Republic of China, poor peak resolution

CNS 8816-1982 Fastening Dimensions of Two - Piece Divided Rims for Industrial Vehicles
CNS 4985-1979 Method of Test for Biodegradability of Nonionic Surface Active Agent
CNS 12704-1990 Method of Test for Particle Size Distribution of Alumina or Quartz Using Centrifugal Sedimentation
CNS 13576-1995 Instrument for Surgery-Scalpela with detachable blades fitting dimensions

IN-BIS, poor peak resolution

IS 13947 Pt.3-1993 Specification for low-voltage switchgear and controlgear. Part 3: Switches, disconnectors, switch disconnectors and fuse combination units
IS 6213 Pt.2-1971

Professional Standard - Aviation, poor peak resolution

HB/Z 5108.1-1999 Analytical methods for phosphating solutions - Potentiometric titration for the determination of free and total acidity

CEN - European Committee for Standardization, poor peak resolution

EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C

Professional Standard - Commodity Inspection, poor peak resolution

SN 0044-1992 Method for inspection of PONA of naphtha for exportMethod for isolation of represenlativesaturates fraction from low-olefinic petroleum naphtha

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, poor peak resolution

PREN 3733-001-1995 Aerospace Series Circular Optical Connector@ Single Channel@ Coupled by Self-Locking Ring Operating Temperatures 150 Degrees Celsius Continuous 200 Degrees Celsius Continuous@ 260 Degrees Celsius Peak and Fire Resistant Part 001: Technical Specification
PREN 2997-002-1990 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Operating Temperatures 175 Degrees Celsius Continuous@ 200 Degrees Celsius Continuous@ 260 Degrees Celsius Peak and Fire Resistant Part 002- Specification of Performance and Cont
PREN 4067-001-1997 Aerospace Series Connectors@ Electrical@ Circular@ Scoop-Proof@ Coupled by Threaded Ring@ Fire-Resistant@ Operating Temperature 260 Degrees C Peak Part 001: Technical Specification (Edition P 1)
PREN 2997-002-2010 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Fire-Resistant or Non Fire-Resistant@ Operating Temperatures - 65 Degrees C to 175 Degrees C Continuous@ 200 Degrees C Continuous@ 260 Degrees C Peak Part 002: Specification of P
PREN 2997-007-2005 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Fire Resistant or Non Fire-Resistant@ Operating Temperatures - 65 Degrees C to 175 Degrees C Continuous@ 200 Degrees C Continuous@ 260 Degrees C Peak Part 007: Hermetic Receptacl
PREN 2997-010-2005 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Fire-Resistant or Non Fire-Resistant@ Operating Temperatures - 65 Degrees C to 175 Degrees C Continuous@ 200 Degrees C Continuous@ 260 Degrees C Peak Part 010: Protective Cover f
PREN 2997-001-2005 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Fire-Resistant or Non Fire-Resistant@ Operating Temperatures - 65 Degrees C to 175 Degrees C Continuous@ 200 Degrees C Continuous@ 260 Degrees C Peak Part 001: Technical Specific
PREN 2997-011-2005 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Fire-Resistant or Non Fire-Resistant@ Operating Temperatures - 65 Degrees C to 175 Degrees C Continuous@ 200 Degrees C Continuous@ 260 Degrees C Peak Part 011: Dummy Receptacle P
PREN 2997-001-2010 Aerospace series Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures - 65 Degrees C to 175 Degrees C continuous@ 200 Degrees C continuous@ 260 Degrees C peak Part 001: Technical specific
PREN 2997-010-2009 Aerospace series Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures – 65 degree C to 175 degree C continuous@ 200 degree C continuous@ 260 degree C peak Part 010: Protective cover for p
PREN 2997-002-2005 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Fire-Resistant or Non Fire-Resistant@ Operating Temperatures - 65 Degrees C to 175 Degrees C Continuous@ 200 Degrees C Continuous@ 260 Degrees C Peak Part 002: Specification of P
PREN 2997-001-1990 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Operating Temperatures 175 Degrees Celsius Continuous@ 200 Degrees Celsius Continuous@ 260 Degrees Celsius Peak and Fire Resistant Part 001- Technical Specification (Edition P 1;
PREN 2997-005-1990 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Operating Temperatures 175 Degrees Celsius Continuous@ 200 Degrees Celsius Continuous@ 260 Degrees Celsius Peak and Fire Resistant Part 005- Hermetic Square Flange Receptacle Pro
PREN 4067-008-2000 Aerospace Series Connectors@ Electrical@ Circular@ Scoop-Proof@ Coupled by Threaded Ring@ Fire-Resistant@ Operating Temperature 260 Degrees C Peak Part 008: Plug Product Standard (Edition P 1)
PREN 2997-008-2005 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Fire Resistant or Non Fire-Resistant@ Operating Temperatures - 65 Degrees to 175 Degrees C Continuous@ 200 Degrees C Continuous@ 260 Degrees C Peak Part 008: Plug Product Standar
PREN 2997-014-2009 Aerospace series Connectors@ electrical@ circular@ coupled be threaded ring@ fire-resistant or non fire-resistant@ operating temperatures - 65 degree C to 175 degree C continuous@ 200 degree C continuous@ 260 degree C peak Part 014: Square flange receptac
PREN 2997-015-2009 Aerospace series Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures - 65 degree C to 175 degree C continuous@ 200 degree C continuous@ 260 degree C peak Part 015: Jam-nut mounted recept
PREN 2997-005-2005 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Fire-Resistant or Non Fire-Resistant@ Operating Temperatures -65 Degrees C to 175 Degrees C Continuous@ 200 Degrees C Continuous@ 260 Degrees C Peak Part 005: Hermetic Square Fla
PREN 2997-009-2005 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Fire-Resistant or Non Fire-Resistant@ Operating Temperatures - 65 Degrees C to 175 Degrees C Continuous@ 200 Degrees C Continuous@ 260 Degrees C Peak Part 009: Protective Cover f
PREN 2997-016-2009 Aerospace series Connectors@ electrical@ circular@ coupled be threaded ring@ fire-resistant or non fire-resistant@ operating temperatures - 65 degree C to 175 degree C continuous@ 200 degree C continuous@ 260 degree C peak Part 016: Plug with integrated a
PREN 2997-008-1990 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Operating Temperatures 175 Degrees Celsius Continuous@ 200 Degrees Celsius Continuous@ 260 Degrees Celsius Peak and Fire Resistant Part 008- Plug Product Standard (Issue P 1)
PREN 2997-004-1990 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Operating Temperatures 175 Degrees Celsius Continuous@ 200 Degrees Celsius Continuous@ 260 Degrees Celsius Peak and Fire Resistant Part 004- Jam- Nut Mounted Receptacle Product S
PREN 2997-009-1990 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Operating Temperatures 175 Degrees Celsius Continuous@ 200 Degrees Celsius Continuous@ 260 Degrees Celsius Peak and Fire Resistant Part 009- Flight Flank for Receptacle Product S
PREN 2997-007-1990 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Operating Temperatures 175 Degrees Celsius Continuous@ 200 Degrees Celsius Continuous@ 260 Degrees Celsius Peak and Fire Resistant Part 007- Hermetic Receptacle with Round Flange

AT-OVE/ON, poor peak resolution

OVE EN IEC 60947-3:2021 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (german version)

Professional Standard - Electron, poor peak resolution

SJ/T 11330-2006 Specification of interfaces for digital television receiving equipment--Part 4: Video interface of S-Video

Professional Standard - Post and Telecommunication, poor peak resolution

YD/T 1064-2000 Access network technical specifications—Low-speed splitterless asymmetric digital subscriber line system(ADSL.lite)

CZ-CSN, poor peak resolution

CSN 64 9006-1985 Aqueous dispersions of polymers and opolymers etermination of white point tempe- ature and minimum film-forming emperature
CSN 70 0641 Cast.2-1976 Chemical analysis of glass. Determinat- ion of sodium and potassium oxides. Fláme photometric method (after se- paration with ion exehangers)
CSN 21 0304-1989 Forming machines. Horizontal forging presses with vertical die parting face. Geometrical accuracy

Professional Standard - Nuclear Industry, poor peak resolution

EJ/T 814-1994 Determination of Thorium in Uranium Ore PMBP Extraction and Separation of Arsenazo Ⅲ Spectrophotometry

ESDU - Engineering Sciences Data Unit, poor peak resolution

ESDU 83045 C-2002 Strong winds in the atmospheric boundary layer. Part 2: discrete gust speeds.
ESDU 83045 C-2012 Strong winds in the atmospheric boundary layer Part 2: discrete gust speeds
ESDU 74009 A-1997 Lift coefficient increment at low speeds due to full-span split flaps.

European Association of Aerospace Industries, poor peak resolution

AECMA PREN 3733-001-1995 Aerospace Series Circular Optical Connector, Single Channel, Coupled by Self-Locking Ring Operating Temperatures 150 Degrees Celsius Continuous 200 Degrees Celsius Continuous, 260 Degrees Celsius Peak and Fire Resistant Part 001: Technical Specification

国家市场监督管理总局、中国国家标准化管理委员会, poor peak resolution

GB/T 223.37-2020 Iron, steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation

GOSTR, poor peak resolution

GOST 6768-1975 Rubber and rubberized fabric. Method for determination of the bond strength at ply separation

Liaoning Provincial Standard of the People's Republic of China, poor peak resolution

DB21/T 612-1991 Determination of potassium and sodium ions in soil soluble salts - flame photometry
DB21/T 611-1991 Determination of calcium and magnesium ions in soil soluble salts - Atomic absorption spectrophotometry

工业和信息化部, poor peak resolution

YS/T 1259-2018 Determination of fluoride ion content on the surface of zirconium alloy pipes by spectrophotometry

PT-IPQ, poor peak resolution

NP EN 1876-1-2000 Rubber-or plastics-coated fabrics Low temperature tests Part 1:Bending test

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, poor peak resolution

JEDEC JESD4-1983 Definition of External Clearance and Creepage Distances of Discrete Semiconductor Packages for Thyristors and Rectifier Diodes

中华人民共和国环境保护部, poor peak resolution

GB 7494-1987 Water quality-Determination of anionic surfactants-Methylene blue spectrophotometric method