ZH
RU
ES

terminal peak shape

terminal peak shape, Total:56 items.

In the international standard classification, terminal peak shape involves: Aerospace fluid systems and components, Fasteners, Pipeline components and pipelines, Bearings, Measurement of fluid flow, Fluid power systems, Non-ferrous metals, Products of non-ferrous metals.

AASHTO - American Association of State Highway and Transportation Officials, terminal peak shape

DIVISION I 10.28-1996 Forked Ends (Interim 2000)

Society of Automotive Engineers (SAE), terminal peak shape

SAE AS4825-1995 Gasket, Fitting End, 24 Degree Cone
SAE AS1159-5-1944 AS1159 Clips, Saddle, with Pressed Ends (M.S.)
SAE AS489-4-1941 AS489 Clips, Saddle, with Pressed Ends (Aluminium Alloy)
SAE AS1160-3-1944 AS1160 Clips, Saddle, with Pressed Ends (Aluminium Alloy)
SAE AS5201-2000 Fitting End, External Taper Pipe Thread, Design Standard FSC 4730
SAE AS3212-1-1950 AS3212 Standard Tubes for Oil Coolers - Pentagon Ends
SAE AS5200-2000 Port or Fitting End, Internal Taper Pipe Thread, Design Standard FSC 4730
SAE AS1014-1960 FITTING END; ATTACHABLE, SWIVEL FLANGE, FLEXIBLE METAL HOSE - STRAIGHT, 45 DEGREES ELBOW AND 90 DEGREES ELBOW STYLES
SAE AS1012-1960 FITTING END; ATTACHABLE, SWIVEL FEMALE 37 DEGREE MACHINED FLARE, FLEXIBLE METAL HOSE - STRAIGHT, 45 DEGREE ELBOW AND 90 DEGREE ELBOW STYLES

Aerospace Industries Association/ANSI Aerospace Standards, terminal peak shape

AIA/NAS NASM20067-2015 KEY, MACHINE, SQUARE IN CROSS SECTION, ONE END SQUARE, OTHER END ROUND (Rev 2)
AIA/NAS NASM20067-2010 KEY, MACHINE, SQUARE IN CROSS SECTION, ONE END SQUARE, OTHER END ROUND (Rev 1)
AIA/NAS NAS 0295-1993 Bearing - Thin Shell, Open and Closed Ends, Regular and Extra Capacity, Single Row, Small Needle (Rev. 2)
AIA/NAS NAS 116-1946 Rod Assembly - Control, Riveted Tube, 1/2 O.D., Alum. Alloy, 1/4 Adjustable Clevis Ends (Rev. 2)
AIA/NAS NAS 117-1946 Rod Assembly - Control, Riveted Tube, 1/2 O.D., Alum. Alloy, 1/4 Adjustable Clevis and Bearing Ends (Rev. 2)

BE-NBN, terminal peak shape

PL-PKN, terminal peak shape

PN W49053-1992 Deck machinery. Warping end profiles

American Gear Manufacturers Association, terminal peak shape

AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair

Aerospace Industries Association, terminal peak shape

AIA NAS 534-1979 (Inactive)Ring Flexible Tubing End (Rev. 3)
AIA NASM35812-1998 Clevis, Rod, End-Adjustable and Plain, Steel FSC 5340

United States Navy, terminal peak shape

NAVY AN665 REV 4 NOTICE 3-1998 TERMINAL-THREADED CLEVIS TIE ROD
NAVY AN665 REV 4 VALID NOTICE 2-1993 TERMINAL-THREADED CLEVIS TIE ROD
NAVY AN665 REV 4 VALID NOTICE 1-1989 TERMINAL-THREADED CLEVIS TIE ROD
NAVY AN665 REV 4-1965 TERMINAL-THREADED CLEVIS TIE ROD

HU-MSZT, terminal peak shape

CH-SNV, terminal peak shape

German Institute for Standardization, terminal peak shape

DIN 3900:2001 Non soldering compression fittings with cutting ring series LL - Straight studs with taper thread
DIN 3903:2001 Non soldering compression fittings with cutting ring - Elbow stud with taper threaded stud end (not for new design)
DIN 3913:2001 Non soldering compression fittings with cutting ring - Run T-stud with taper threaded stud end (not for new design)
DIN 3906:2001 Non soldering compression fittings with cutting ring - Branch T-stud with taper threaded stud end (not for new design)
DIN ISO 12151-2:2004 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)
DIN 3489:2001 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring

YU-JUS, terminal peak shape

JUS N.P2.100-1986 Electrical equipment of road vehfcles. Cilindrical fuse-links with conic ends. Technical requirements and tests

European Committee for Standardization (CEN), terminal peak shape

EN 4557:2003 Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Tees nipples, welded end; Inch series
EN 4552:2003 Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Straight nipples, welded end - Inch series

International Organization for Standardization (ISO), terminal peak shape

ISO 3847:1977 Liquid flow measurement in open channels by weirs and flumes; End-depth method for estimation of flow in rectangular channels with a free overfall
ISO 12151-1:2010 Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
ISO 12151-1:1999 Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
ISO 12151-2:2003 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings
ISO 4371:1984 Measurement of liquid flow in open channels by weirs and flumes; End depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method)

British Standards Institution (BSI), terminal peak shape

BS ISO 12151-2:2003 Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings
BS ISO 12151-6:2009 Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-6 60 ° cone ends

European Association of Aerospace Industries, terminal peak shape

AECMA PREN 4226-1995 Aerospace Series Pipe Couplings 60 Degree; in Anodized Aluminium Alloy, Unions; Elbows 90 Degree with Flexible Tube Fitting End

Korean Agency for Technology and Standards (KATS), terminal peak shape

KS B ISO 12151-1:2006 Connections for hydraulic fluid power and general use-Hose fittings- Part 1:Hose fittings with ISO 8434-3 O-ring face seal ends
KS B ISO 12151-1:2013 Connections for hydraulic fluid power and general use-Hose fittings- Part 1:Hose fittings with ISO 8434-3 O-ring face seal ends
KS B ISO 12151-2:2006 Connections for hydraulic fluid power and general use-Hose fittings-Part 2:Hose fittings with KS B ISO 8434-1 and KS B ISO 8434-4 24° cone connector ends with O-rings

RO-ASRO, terminal peak shape

STAS 10806/5-1986 Wood working tools BORING CUTIERS WITH CARBIDE TIPS FOR VENEERS RONE OVING AT EDGE Shapes and mam dimensions

Standard Association of Australia （SAA）, terminal peak shape

AS 3778.4.10:1991 Measurement of water flow in open channels - Measurement using flow gauging structures - End-depth method for estimation of flow in rectangular channels with a free overfall
AS 3778.4.11:1991 Measurement of water flow in open channels - Measurement using flow gauging structures - End-depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method)

Association Francaise de Normalisation, terminal peak shape

NF E48-079-2*NF ISO 12151-2:2007 Connections for hydraulic fluid power and general use - Hose fittings - Part 2 : hose fittings with ISO 8434-1 and ISO 8434-4 24 o cone connector ends with O-rings.