ZH

RU

ES

Measuring the Density of Trace Liquids

Measuring the Density of Trace Liquids, Total:494 items.

In the international standard classification, Measuring the Density of Trace Liquids involves: Measurement of volume, mass, density, viscosity, Measurement of fluid flow, Petroleum products in general, Metrology and measurement in general, Analytical chemistry, Crude petroleum, Fuels, Paints and varnishes, Organic chemicals, Cereals, pulses and derived products, Equipment for petroleum and natural gas industries, Particle size analysis. Sieving, Document imaging applications, Thermodynamics and temperature measurements, Adhesives, Radiation protection, Ceramics, Semiconducting materials, Magnetic materials, Construction materials, Road engineering, Plastics, Milk and milk products, Fluid power systems, Wastes, Products of the chemical industry, Semiconductor devices, Geology. Meteorology. Hydrology, Optoelectronics. Laser equipment, Soil quality. Pedology, Vocabularies, Natural gas, Non-textile floor coverings, Mechanical testing, Linear and angular measurements, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Solar energy engineering, Aerospace fluid systems and components, Rubber and plastics products, Metalliferous minerals, Water quality, Air quality, Freight distribution of goods, Road vehicle systems, Inorganic chemicals, Radiation measurements, Insulating fluids, Fertilizers, Optics and optical measurements, Nuclear energy engineering, Non-ferrous metals, Powder metallurgy, Materials for the reinforcement of composites, Paint ingredients, Hydraulic fluids, Lubricants, industrial oils and related products, Electromechanical components for electronic and telecommunications equipment, Surface treatment and coating, Diagnostic, maintenance and test equipment, Aids for disabled or handicapped persons, Testing of metals, Earthworks. Excavations. Foundation construction. Underground works, Waxes, bituminous materials and other petroleum products, Microbiology.


Natural Gas Processor's Association (NGPA), Measuring the Density of Trace Liquids

  • GPA RR-147-1995 Density Measurements on Natural Gas Liquids
  • GPA RR-62-1982 Water-Hydrocarbon Liquid-Liquid-Vapor Equilibrium Measurements to 530 Degrees F
  • GPA STD 2172-2009 Calculation of Gross Heating Value, Relative Density, Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer (Third Edition)
  • GPA STD 2188-1989 Tentative Method for the Determination of Ethyl Mercaptan in Lp-Gas Using Length of Stain Tubes
  • GPA RR-93-1986 Gas Solubilities and Vapor-Liquid Equilibrium Measurements of H2, CO2 and NH3 in Water-Phenol Mixtures from 110 Degrees F to 550 Degrees F

Professional Standard - Aerospace, Measuring the Density of Trace Liquids

  • QJ 2485-1993 Cryogenic liquid (liquid hydrogen, liquid oxygen) density measurement specification
  • QJ 1230-1987 Estimation of Uncertainty in Temperature Measurement of Liquid Rocket Engine
  • QJ 1794-1989 Uncertainty Estimation Method for Steady-state Flow Measurement of Liquid Rocket Engine
  • QJ 2968-1997 Method for measuring medium and high temperature temperature of liquid rocket engine
  • QJ 1789-2011 Evaluation of Measurement Uncertainty in Liquid Rocket Motor Test
  • QJ 1086-1986 Cryogenic temperature measurement specification for liquid rocket engine test
  • QJ 1789.1-2011 Evaluation of Measurement Uncertainty in Liquid Rocket Motor Test
  • QJ 1789.2-2011 Evaluation of Measurement Uncertainty in Liquid Rocket Motor Test
  • QJ 1789.3-2011 Evaluation of Measurement Uncertainty in Liquid Rocket Motor Test
  • QJ 1229-1987 Estimation Method of Measurement Uncertainty of Steady State Parameters of Liquid Rocket Engine
  • QJ 1789-1989 Uncertainty Estimation Method for Steady State Thrust Measurement of Liquid Rocket Engine
  • QJ 1790-1989 Uncertainty Estimation Method for Steady-state Pressure Measurement of Liquid Rocket Motor

PL-PKN, Measuring the Density of Trace Liquids

  • PN B13041-1988 Hydrometers for measuring of urine density
  • PN T04900-1972 Microv/ave devices Measuring meihods o? ?lux densi?y microwaye power for sa?efy opplica?ions
  • PN C04829-1992 Agents for laundering and washing. Washing powders. Determination of apparent density. Method by measuring the mass of a given volume

Japanese Industrial Standards Committee (JISC), Measuring the Density of Trace Liquids

  • JIS Z 8804:2012 Methods of measuring density and specific gravity of liquid
  • JIS Z 8803:2011 Methods for viscosity measurement of liquid
  • JIS Z 8807:2012 Methods of measuring density and specific gravity of solid
  • JIS B 7555:2003 Method of flow measurement by coriolis meters (mass flow, density and volume flow measurement)
  • JIS Z 8705:1992 Method of temperature measurement by liquid-in-glass thermometers
  • JIS Z 8822:2001 Determination of particle size distribution by the mass of sediment-particles in liquid
  • JIS H 7313:2007 Superconductivity -- Measurements for bulk high temperature superconductors -- Trapped flux density of large grain oxide superconductors
  • JIS A 1104 ERRATUM 1:2000 Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)

American National Standards Institute (ANSI), Measuring the Density of Trace Liquids

  • ANSI/ASME MFC-2M-1983 Measurement Uncertainty for Fluid Flow in Closed Conduits
  • ANSI/ASME MFC-5M-1985 Measurement of Liquid Flow in Closed Conduits using Transit-Time Ultrasonic Flowmeters
  • BS EN ISO 748:2021 Tracked Changes. Hydrometry. Measurement of liquid flow in open channels. Velocity area methods using point velocity measurements (British Standard)

未注明发布机构, Measuring the Density of Trace Liquids

  • ASME MFC-2M-1983 Uncertainty in liquid flow measurements in sealed pipes
  • BS ISO 13689:2001 Refrigerated light hydrocarbon fluids — Measurement of liquid levels in tanks containing liquefied gases — Microwave - type level gauge
  • BS ISO 13359:1998(1999) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
  • BS EN 62047-9:2011(2012) Semiconductor devices — Micro - electromechanical devices Part 9 : Wafer to wafer bonding strength measurement for MEMS
  • BS 1041-2.1:1985(2007) Temperature measurement — Part 2 : Expansion thermometers — Section 2.1 Guide to selection and use of liquid - in - glass thermometers

National Metrological Verification Regulations of the People's Republic of China, Measuring the Density of Trace Liquids

Professional Standard - Energy, Measuring the Density of Trace Liquids

  • NB/SH/T 0874-2013 Crude peroleum and liquid petroleum products.Laboratory determination of density.Weighing digital liquid density meter method

Group Standards of the People's Republic of China, Measuring the Density of Trace Liquids

  • T/CAIA YQ002-2016 Testing Method of Micro-Flow Liquid
  • T/CAB 1038-2020 Determination of hydrogen storage density of hydrogenated liquid organic hydrogen carrier - Water displacement method
  • T/CRES 0009-2022 Testing method of thermochemical energy storage temperature and energy density for solid compounds
  • T/IAWBS 012-2019 Test Method for Surface Quality and Micropipe?Density?of Silicon Carbide?Single Crystal?Polishing Wafers——Confocal and Differential Interferometry Optics
  • T/IAWBS 010-2019 Detection method for measuring the surface Detection method for measuring the surface quality and micropipe densityof polished monocrystalline silicon carbide wafers-Laser Scattering Method

PT-IPQ, Measuring the Density of Trace Liquids

  • NP 1695-1980
  • NP 3757-1989 SOLID FUELS Cokes Determination of true relative density, apparent relative density and porosity
  • NP EN ISO 8973:2001 Liquefied petroleum gases Calculation method for density and vapour pressure(ISO 8973:1997)
  • NP EN ISO 3993:2000 Liquefied petroleum gas and light hydrocarbons Determination of density or relative density Pressure hydrometer method (ISO 3993-1995)
  • NP ISO 3233:2000 Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
  • NP 988-2000 Cereais Détermination of bulk density, called "mass per hectolitre" Routine method

RU-GOST R, Measuring the Density of Trace Liquids

  • GOST 8.024-2002 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring density
  • GOST 8.024-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring density of liquid
  • GOST R 8.688-2009 State system for ensuring the uniformity of measurements. Density of petroleum. Requirements for methods of measurement by hydrometers during metering operations
  • GOST 8.576-2001 State system for ensuring the uniformity of measurements. State verification schedule for means measuring flux, flux density and fluence of electrons, energy flux, energy flux density and fluence of energy of electrons and bremsstrahlung radiation
  • GOST 8.595-2010 State system for ensuring the uniformity of measurements. Density and volume of petroleum. The tables of factors for recalculation of density and mass
  • GOST 8.636-2013 State system for ensuring the uniformity of measurements. Density of petroleum. Requirements to methods of measurement by hydrometers during metering operations
  • GOST R 8.701-2010 State system for ensuring the uniformity of measuremenets. Liquid purity measuring instruments. Verification procedure
  • GOST R 56883-2016 Biomass. Determination of bulk density by standard method
  • GOST R 8.599-2003 State system for ensuring the uniformity of measurements. Density and volume of oil. The tables of factots for recalculation of density and mass
  • GOST 8.030-2013 State system for ensuring the uniformity of measurements. State hierarchy scheme for means measuring magnetic flux density, magnetic flux, magnetic moment and gradient of magnetic flux density
  • GOST 18986.23-1980 Zener diodes. Methods for measuring spectral noise density
  • GOST R 50005-1992 Lasers and solid-state laser heads. Measurement methods of peak local energy (power) density
  • GOST 8.195-2013 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring spectral density of radiance, spectral density of radiant intensity, spectral density of irradiance, radiant intensity and irradiance in the wavel
  • GOST 8.588-2006 State system for ensuring the uniformity of measurements. State verification scheme for means of measuring of material optical density
  • GOST R 8.610-2004 State system for ensuring the uniformity of measurements. Density of oil. The tables for recalculation
  • GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
  • GOST 24802-1981 Level meters for liquid and solids. Terms and definitions
  • GOST 8.025-1996 State system for ensuring the uniformity of measurements. State verification schedule for means measuring viscosity of liquids
  • GOST 8.025-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring kinematic viscosity of liquid
  • GOST 8.602-2010 State system for ensuring the uniformity of measurements. Density of oil. The tables for recalculation
  • GOST 8.591-2009 State system for ensuring the uniformity of measurements. Nanometer range relief measure with trapezoidal profile of elements. Verification method
  • GOST 8.031-1982 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means of measuring neutron flux and its density
  • GOST 8.279-1978 State system for ensuring the uniformity of measurements. Glass liquid working thermometers. Calibration methods
  • GOST R 8.845-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Method of measuring volume density of electric charge of air and air ion concentration using aspiration capacitor
  • GOST R 8.774-2011 State system for ensuring the uniformity of measurements. Disperse composition of liquid media. Determination of particle size by dynamic light scattering
  • GOST R 8.646-2008 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring volume densities of ionized air electric charge and air ion number concentration
  • GOST R 8.700-2010 State system for ensuring the uniformity of measurements. Method of surface roughness effective height measurements by means of scanning probe atomic force microscope
  • GOST R 8.797-2012 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring the heat flux surface density in the range from 1 to 10000 W/m2
  • GOST 8.195-1989 State system for ensuring the uniformiry of measurements. State verification schedule for means measuring spectral density of radiance, spectral density of radiant intensity and spectral density of irradiance in the wavelength range of 0,25 - 25,00 mu; ra
  • GOST 8.592-2009 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Geometrical shapes, linear size and manufacturing material requirements
  • GOST 8.171-1975 State system of ensuring the uniformity of measurements. Actual measures of the surface density for radiation thickness gauges. General specifications
  • GOST R 8.780-2012 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the energy, of the distribution of energy density, of the pulse duration and of the laser wavelength in the wavelength range from 0,3 to 2,0 µm
  • GOST R EN 13528-1-2010 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Part 1. General requirements
  • GOST R 8.870-2014 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring of sound velocity in liquids within the velocity range 800 to 2000 m/s
  • GOST R 8.775-2011 State system for ensuring the uniformity of measurements. Disperse composition of gas atmospheres. Determination of nano particle size by differential electrical mobility analysis for aerosol particles

Association Francaise de Normalisation, Measuring the Density of Trace Liquids

  • NF T20-050:1985 Chemical products for industrial use. Determination of density of liquids. Aerometric method.
  • NF M08-016:1992 Petroleum and liquid petroleum products. Determination of density for metrological purposes. Oscillation frequence method.
  • NF X10-112:1977 Measurement of fluid flow in closed conduites.velocity area method using pitot static tubes.
  • NF V03-719:1996 Cereals. Determination of bulk density, called "mass per hectolitre".
  • NF X10-113:1982 Determination of flowrate of fluids in closed conduits of circular cross-section. Method of velocity measurement at one point of the cross-section.
  • NF X10-331:1992 Liquid flow measurement in open channels. Slope-area method.
  • NF B35-212-2*NF EN ISO 15212-2:2002 Oscillation-type density meters - Part 2 : process instruments for homogeneous liquids
  • NF Z43-005:1984 Micrographics. Visual density of microfilms. Method of measurement and values.
  • NF X10-301*NF EN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements
  • NF M08-025*NF ISO 15169:2004 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems.
  • NF T51-425:1983 Plastics. Liquid and solid phenolic resins. Measurement of density.
  • NF X10-309:1986 Liquid flow measurement in open channels. Velocity area methods. Collecting and processing of data for determination of errors measurement.
  • NF ISO 15169:2004 Pétrole et produits pétroliers liquides - Détermination du volume, de la masse volumique et de la masse d'hydrocarbures contenus dans les réservoirs cylindriques verticaux à l'aide de systèmes hybrides de mesurage
  • NF B10-503:1973 QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF POROSITY, OF THE TRUE WEIGHT PER UNIT VOLUME, AND OF THE APPARENT WEIGHT PER UNIT VOLUME.
  • NF E48-652:1990 Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method.
  • NF ISO 4268:2000 Pétrole et produits pétroliers liquides - Mesurages de la température - Méthodes manuelles
  • NF EN ISO 15970:2014 Gaz naturel - Mesurage des caractéristiques - Caractéristiques volumétriques : masse volumique, pression, température et facteur de compression
  • NF M08-016:2005 Petroleum and liquid petroleum products - Determination of density for metrological purposes - Oscillation frequency method.
  • NF M08-016:2014 Petroleum and liquid petroleum products - Determination of density for metrological purposes - Oscillation frequency method
  • NF M07-034:1970 Liquid fuels. Determination of the reid vapour pressure of petroleum and its derivatives by the micro method.
  • NF E48-041:1995 Hydraulic fluid power. Multiple lip packing sets. Methods for measuring stock heights.
  • NF X43-050:1996 Air quality. Determination of the asbestos fiber concentration by transmission electron microscopy. Indirect method.
  • NF C31-888-9*NF EN 61788-9:2005 Superconductivity - Part 9 : measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors.
  • NF C27-261*NF EN 62021-1:2004 Insulating liquids - Determination of acidity - Part 1 : automatic potentiometric titration
  • NF M08-017:2006 Petroleum and liquid petroleum products - Measurement tables for light hydrocarbon liquids - Densities at 15 oC within 500 kg/m3 and 653 kg/m3.
  • NF M07-038:1968 Liquid fuels. Determination of the sodium content in petroleum products (flame photometry method).
  • NF ISO 3939:2006 Transmissions hydrauliques et pneumatiques - Garnitures à lèvres multiples - Méthodes de mesurage des hauteurs d'empilage
  • NF X43-017:1984 Air quality. Measurement of the concentration of solid particles in ambient air. Beta ray absorption method.
  • NF T60-152:1979 Produits pétroliers - Mesure de la viscosité à basse température au moyen du viscosimètre Brookfield - Méthode à bain liquide.
  • NF P84-706:2019 Géosynthétiques bentonitiques - Détermination du flux liquide par unité de longueur de recouvrement
  • NF X10-314:1983 Liquid flow measurement in open channels by weirs and flumes. End-depth method for estimation of flow in rectangular channels with a free overfall.
  • NF R19-501-7:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 7 : particle sizing and counting by microscopic analysis.
  • NF X31-433*NF ISO 16586:2003 Sol quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • NF EN 61788-9:2005 Supraconductivité - Partie 9 : mesures pour supraconducteurs haute température massifs - Densité de flux résiduel des oxydes supraconducteurs à gros grains
  • NF X11-683:1981
  • NF E48-392-2*NF ISO 15086-2:2001 Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2 : measurement of the speed of sound in a fluid in a pipe
  • NF E48-041*NF ISO 3939:2006 Fluid power systems and components - Multiple lip packing sets - Methods for measuring stack heights
  • NF U44-307/A1:2006 Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space.
  • NF U44-307*NF EN 13041:2012 Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space
  • NF X10-114:1993 Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or pitot static tubes.
  • NF P94-057:1992 Soils investingation and testing. Granulometric analysis. Hydrometer method.
  • NF P98-250-6:1991 TESTS RELATING TO PAVEMENTS. PREPARATION OF BITUMINOUS MIXTURES. PART 6 : MEASUREMENT OF THE APPARENT SPECIFIC GRAVITY OF A SPECIMEN USING THE HYDROSTATIC METHOD.

Professional Standard - Petrochemical Industry, Measuring the Density of Trace Liquids

  • SH/T 0413-1992 Determination of Trace Basic Nitrogen Content in Liquid Paraffin
  • SH/T 0409-1992 Determination of Aromatics Content in Liquid Paraffin (UV Spectrophotometry)

Korean Agency for Technology and Standards (KATS), Measuring the Density of Trace Liquids

  • KS A 0531-2016(2021) Viscosity of liquid-Methods of measurement
  • KS A 0531-2016 Viscosity of liquid-Methods of measurement
  • KS B ISO 18481:2020 Hydrometry — Liquid flow measurement using end depth method in channels with a free overfall
  • KS M ISO 13689-2003(2008) Refrigerated light hydrocarbon fluids-Measurement of liquid levelsin tanks containing liquefied gases-Microwave-type level gauge
  • KS B ISO 15212-2:2006 Oscillation-type density meters-Part 2:Process instruments for homogeneous liquids
  • KS B ISO 1768:2007 Glass hydrometers-Conventional value for the thermal cubic expansion coefficient(for use in the preparation of measurement tables for liquids)
  • KS A 0512-2009(2019) Method of temperature measurement by liquid-in-glass thermometers
  • KS M 1071-10-2007 Guide for determination of the viscosity of liquids of chemical substances
  • KS M ISO 15169-2005(2020) Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
  • KS D 0264-1989(2019) Method of measurement of etch pit density of germanium crystal
  • KS C 6111-5-2008(2018) Measurements of the thickness of superconductor films at microwave frequencies
  • KS M ISO 15169:2005 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
  • KS B ISO TR 7178-2003(2013) Liquid flow measurement in open channels-Velocity-area methods-Investigation of total error
  • KS B ISO 10790-2003(2018) Measurement of fluid flow in closed conduits-Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
  • KS B ISO 13359-2014(2019) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
  • KS X ISO 6200-2007(2022) Micrographics-First generation silver-gelatin microforms of source documents-Density specifications and method of measurement
  • KS X ISO 6200-2007(2017) Micrographics-First generation silver-gelatin microforms of source documents-Density specifications and method of measurement
  • KS M ISO 8310-2003(2008) Refrigerated light hydrocarbon fluids-Measurement of temperature in tanks containing liquefied gases-Resistance thermometers and thermocouples
  • KS I ISO 15970-2010(2021) Natural gas-Measurement of properties-Volumetric properties: density, pressure, temperature and compression factor
  • KS W ISO 5884:2007 Aerospace-Fluid systems and components-Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
  • KS M 3047-1993 Method for Measuring Smoke Density and Concentration of Gases Evolved by Incineration or Decomposition of Plastics
  • KS B ISO 10790:2003 Measurement of fluid flow in closed conduits-Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
  • KS P 1975-2018 Protocol for evaluation of precision performance of the quantitative test in in-vitro diagnostic medical laboratory
  • KS I ISO 16586:2009 Soil quality-Determination of soil water content as a volume fraction on the basis of known dry bulk density-Gravimetric method
  • KS X ISO 8126-2007(2012) Micrographics-Duplicating film, silver, diazo and vesicular-Visual density-Specifications and measurement
  • KS B ISO 1088:2005 Liquid flow measurement in open channels-Velocity-area methods-Collection and processing of data for determination of errors in measurement
  • KS D 8310-2001(2016) Anodizing of aluminium and its alloys-Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
  • KS D 8310-2001(2021) Anodizing of aluminium and its alloys-Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
  • KS M ISO 4266-1-2003(2018)
  • KS D ISO 10076:2001 Metallic powde-Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
  • KS D ISO 10076:2013 Metallic powde-Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
  • KS B ISO 1088:2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
  • KS B ISO 1088:2015 Liquid flow measurement in open channels-Velocity-area methods-Collection and processing of data for determination of errors in measurement
  • KS X ISO 8126:2007 Micrographics-Duplicating film, silver, diazo and vesicular-Visual density-Specifications and measurement
  • KS X ISO 8126:2013 Micrographics-Duplicating film, silver, diazo and vesicular-Visual density-Specifications and measurement
  • KS M ISO 2211-2003(2018)
  • KS D ISO 10076-2001(2011) Metallic powde-Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
  • KS M ISO 1183-3:2003 Plastics-Methods for determining the density of non-cellular plastics-Part 3:Gas pyknometer method
  • KS M ISO 21687:2011 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
  • KS M ISO 21687:2016 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
  • KS M ISO 4266-6-2003(2018)
  • KS M ISO 4266-4-2003(2018)
  • KS F 2234-2016 Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards
  • KS M 2450-2007(2017) Test method for low-temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
  • KS M ISO 3233-2002(2012) Paints and varnishes-Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
  • KS B ISO 3939:2006 Fluid power systems and components-Multiple lip packing sets-Methods for measuring stack heights
  • KS B ISO 3939-2006(2016) Fluid power systems and components -Multiple lip packing sets - Methods for measuring stack heights
  • KS B ISO TS 15768:2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters
  • KS M ISO 4266-3-2003(2018)
  • KS C IEC 61788-9-2016(2021) Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
  • KS C IEC 61788-9:2016 Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors

International Organization for Standardization (ISO), Measuring the Density of Trace Liquids

  • ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
  • ISO 748:1979 Liquid flow measurement in open channels; Velocity-area methods
  • ISO 1070:1973 Liquid flow measurement in open channels — Slope-area method
  • ISO 15212-2:2002 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids
  • ISO 1768:1975 Glass hydrometers; Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)
  • ISO 10790:1999/Amd 1:2003 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements); Amendment 1: Guidance for gas measurement
  • ISO 10790:2015 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
  • ISO 12154:2014 Determination of density by volumetric displacement - Skeleton density by gas pycnometry
  • ISO 8130-16:2022 Coating powders — Part 16: Determination of density by liquid displacement in a measuring cylinder
  • ISO 1070:1992/Amd 1:1997 Liquid flow measurement in open channels — Slope-area method — Amendment 1
  • ISO 1070:2018 Hydrometry — Slope-area method
  • ISO 1088:1973 Liquid flow measurement in open channels — Velocity-area methods — Collection of data for determination of errors in measurement
  • ISO 15169:2003 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
  • ISO 4405:2022 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method
  • ISO 18481:2017 Hydrometry - Liquid flow measurement using end depth method in channels with a free overfall
  • ISO 8126:2000 Micrographics - Duplicating film, silver, diazo and vesicular - Visual density - Specifications and measurement
  • ISO/CD 4266-5:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 5: Measurement of temperature in marine vessels
  • ISO 15212-2:2002/cor 1:2008 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids; Technical Corrigendum 1
  • ISO/DIS 4266-2:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels
  • ISO/PRF 4266-2:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels
  • ISO 4266-4:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks
  • ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
  • ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
  • ISO/CD TR 6037 Automated liquid handling systems – Uncertainty of the measurement procedures
  • ISO 4266-1:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks
  • ISO/CD 4266-6:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)
  • ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
  • ISO 10790:1999 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
  • ISO/CD 4266-3:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)
  • ISO 8126:2019 Micrographics — Duplicating film, silver, diazo and vesicular — Specifications and measurement for visual density
  • ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks - Determination of bulk density
  • ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • ISO 1088:2007 Hydrometry - Velocity-area methods using current-meters - Collection and processing of data for determination of uncertainties in flow measurement
  • ISO 11597:1995 Verification of samples of uranyl or plutonium nitrate solutions by density measurements
  • ISO 697:1975 Title missing - Legacy paper document
  • ISO 697:1981 Surface active agents; Washing powders; Determination of apparent density; Method by measuring the mass of a given volume
  • ISO 16586:2003/Cor 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method; Technical Corrigendum 1
  • ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
  • ISO 16232-7:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis
  • ISO 8691:1994 Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing
  • ISO 3939:1977 Fluid power systems and components; Multiple lip packing sets; Methods for measuring stack heights
  • ISO 3846:1977 Liquid flow measurement in open channels by weirs and flumes — Free overfall weirs of finite crest width (rectangular broad-crested weirs)
  • ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption

AR-IRAM, Measuring the Density of Trace Liquids

British Standards Institution (BSI), Measuring the Density of Trace Liquids

  • BS ISO 8130-16:2022 Coating powders - Determination of density by liquid displacement in a measuring cylinder
  • BS EN ISO 8130-16:2023 Coating powders - Determination of density by liquid displacement in a measuring cylinder
  • BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
  • BS EN ISO 15212-2:2002 Oscillation-type density meters — Part 2: Process instruments for homogenous liquids
  • BS ISO TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
  • BS ISO 10790:2015 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
  • BS ISO 10790:1999 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
  • 20/30358619 DC BS EN ISO 748. Hydrometry. Measurement of liquid flow in open channels. Velocity area methods using point velocity measurements
  • BS 734C:1962 Measurement of the density of milk using a hydrometer - Percentage of total solids and non-fatty solids in milk corresponding to given fat content and observed density fat content range 2-6 per cent (with fat in the liquid state)
  • 22/30447788 DC BS ISO 8130-16. Coating powders. Part 16. Determination of density by liquid displacement in a measuring cylinder
  • BS EN ISO 10545-3:1997 Ceramic tiles. Determination of water absorption, apparent porosity, apparent relative density and bulk density
  • BS ISO 18481:2017 Hydrometry. Liquid flow measurement using end depth method in channels with a free overfall
  • BS ISO 8126:2000 Micrographics - Duplicating film, silver, diazo and vesicular - Visual density - Specifications and measurement
  • BS 7755-5.6:1999 Soil quality - Physical methods - Determination of dry bulk density
  • BS ISO 6200:1999 Micrographics. First generation silver-gelatin microforms of source documents. Density specifications and method of measurement
  • BS ISO 4266-4:2023 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in atmospheric tanks
  • BS ISO 15169:2003 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
  • BS ISO 4268:2000 Petroleum and liquid petroleum products. Temperature measurements. Manual methods
  • BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
  • BS EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Gas pyknometer method
  • 23/30461342 DC BS ISO 4266-2. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Part 2. Measurement of level in marine vessels
  • BS ISO 4266-1:2023 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in atmospheric tanks
  • BS ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
  • 22/30461348 DC BS ISO 4266-4. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Part 4. Measurement of temperature in atmospheric tanks
  • BS ISO 3852:2008 Iron ores for blast furnace and direct reduction feedstocks - Determination of bulk density
  • 22/30461339 DC BS ISO 4266-1. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Part 1. Measurement of level in atmospheric tanks
  • BS ISO 16232-7:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by microscopic analysis
  • BS EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
  • BS EN 62021-1:2003 Insulating liquids - Determination of acidity - Automatic potentiometric titration
  • BS 5339:1976 Method of measurement of colour in Hazen units (platinum-cobalt scale) of liquid chemical products
  • BS ISO 1088:2007 Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
  • BS 1041-2.1:1985 Code for temperature measurement - Expansion thermometers - Guide to selection and use of liquid-in-glass thermometers
  • BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
  • BS EN 62047-9:2011 Semiconductor devices. Micro-electromechanical devices. Wafer to wafer bonding strength measurement for MEMS
  • BS EN 62047-9:2013 Semiconductor devices. Micro-electromechanical devices. Wafer to wafer bonding strength measurement for MEMS
  • BS EN ISO 787-11:1995 General methods of test for pigments and extenders. Determination of tamped volume and apparent density after tamping
  • BS 1042 Sec.2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
  • BS 6169-2:1984 Methods for volumetric measurement of liquid hydrocarbons - Turbine meter systems
  • BS ISO 17190-9:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for gravimetric determination of flow rate and bulk density
  • BS EN 14187-4:2017 Tracked Changes. Cold applied joint sealants. Test methods. Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
  • BS ISO 8126:2019 Tracked Changes. Micrographics. Duplicating film, silver, diazo and vesicular. Specifications and measurement for visual density
  • BS EN 62047-25:2016 Semiconductor devices. Micro-electromechanical devices. Silicon based MEMS fabrication technology. Measurement method of pull-press and shearing strength of micro bonding area
  • BS 1041 Sec.2.1:1985 Temperature measurement. Expansion thermometers. Guide to selection and use of liquid-in-glass thermometers
  • BS EN 13041:2011 Soil improvers and growing media. Determination of physical properties. Dry bulk density, air volume, water volume, shrinkage value and total pore space
  • BS EN 13041:2000 Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space
  • BS 1042 Sec.2.1:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method using Pitot static tubes
  • BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • BS EN 13286-4:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating hammer
  • BS EN 13286-5:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating table
  • BS 1042 Sec.2.4:1989 Measurement of fluid flow in closed conduits. Velocity-area methods. Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Measuring the Density of Trace Liquids

  • GB/T 6324.4-1986 Determination of trace sulphur in products of organic liquid--Micro-coulometry method
  • GB/T 13354-1992 Test method for density of adhesives in fluid from.Method of weight cup
  • GB/T 2413-1980 Piezoelectric ceramic materials--Measuring methods for determination of volume density
  • GB/T 2413-1981 Piezoelectric ceramic materials--Measuring methods fordetermination of volume and density
  • GB 2413-1981 Measurement method of bulk density of piezoelectric ceramic materials
  • GB 2413-1980 Measurement method of bulk density of piezoelectric ceramic materials
  • GB/T 25964-2010 Petroleum and liquid petroleum products.Determination of volume,density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
  • GB/T 8927-1988 Petroleum and liquid petroleum products--Method of measuring the temperature
  • GB 8927-1988 Petroleum and liquid petroleum products-Method of measuring the temperature
  • GB/T 32282-2015 Measurement of Dislocation Density in Gallium Nitride Single Crystal by Cathodoluminescence Microscopy
  • GB/T 8927-2008 Petroleum and liquid petroleum products.Temperature measurement.Manual methods
  • GB/T 13984-2005 Micrographics.Duplicating film,silver,diazo and vesicular.Visual density.Specifications and measurement
  • GB/T 31253-2014 Natural gas.Validation for gaseous reference materials.Direct measurement of calorific value and density
  • GB 4120.4-1983 Liquid chlorinated methanes for industrial use--Determination of micro-amounts of water(Karl Fischer method)
  • GB/T 6373-2003 Surface active agents--Determination of apparent density--Method by measuring the mass of a given volume
  • GB/T 21451.4-2008 Petroleum and liquid petroleum products.Measurement of level and temperature in storage tanks by automatic methods.Part 4:Measurement of temperature in atmospheric tanks
  • GB/T 6160-2003 Micrographics First generation silver-gelatin microforms of source documents--Density specifications and method of measurement
  • GB/T 20729-2006 Measurement of conductive liquid flow in closed conduits Flanged electromagnetic flowmeters Overall length
  • GB/T 41853-2022 Semiconductor devices—Micro-electromechanical devices—Wafer to wafer bonding strength measurement
  • GB/T 21451.1-2015 Petroleum and liquid petroleum products.Measurement of level and temperature in storage tanks by automatic methods.Part 1:Measurement of level in atmospheric tanks
  • GB/T 4120.5-1992 Liquid chlorinated methanes for industrial use--Determination of micro-amounts of water(cloud point method)
  • GB/T 13175-1991 Determination of apparent density of powdered detergent.Method by measuring the mass of a given volume
  • GB 9880-1988 Fluid power systems and components--Multiple lip packing sets--Methods for measuring stack heights
  • GB/T 9984.9-2004 Industrial sodium tripolyphosphate-Determination of apparent density-Method by measuring the mass of a given volume
  • GB/T 9984.9-1988 Industrial sodium tripolyphosphate determination of apparent density--Method by measuring the mass of a given volume
  • GB/T 8570.7-1988 Liquefied anhydrous ammonia--Determination of iron content--o-Phenanthroline spectrophotometric method
  • GB/T 6324.4-2008 Test method of organic chemical products. Part 4: Determination of trace sulfur in organic liquid products. Microcoulometric method
  • GB/T 24959-2010 Refrigerated light hydrocarbon fluids.Measurement of temperature in tanks containing liquefied gases.Resistance thermometers and thermocouples
  • GB/T 9272-2007 Paints and varnishes.Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
  • GB/T 17746-1999 Petroleum liquids and gases--Fidelity and security of dynamic measurement--Cabled transmission of electric and/or electronic pulsed data
  • GB/T 8570.7-2010 Determination of liquefied anhydrous ammonia.Part 7:Iron content.o-Phenathroline spectrophotometric method

American Society of Mechanical Engineers (ASME), Measuring the Density of Trace Liquids

  • ASME MFC-1M-1991 Glossary of terms used in measurement of fluid flow in pipes
  • ASME MFC-16-2014 Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
  • ASME MFC-16M-1995 Measurement of fluid flow in closed conduits by means of electromagnetic flowmeters
  • ASME MFC-5.1-2011 Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters

KR-KS, Measuring the Density of Trace Liquids

Professional Standard - Agriculture, Measuring the Density of Trace Liquids

  • GB 6324.4-1986 Determination of Trace Sulfur in Organic Liquid Products Microcoulometry
  • GB 8570.7-1988 Determination of the content of liquid anhydrous ammonium ferric o-phenanthroline spectrophotometric method
  • NY/T 4313-2023 Determination of Arsenic, Cadmium, Lead, Chromium, Copper and Zinc in Biogas Slurry Microwave Digestion-Inductively Coupled Plasma Mass Spectrometry

Military Standard of the People's Republic of China-General Armament Department, Measuring the Density of Trace Liquids

  • GJB 772.104-1989 Test methods for explosives - Determination of density of charge column (block) - Hydrostatic weighing method
  • GJB 8683.3-2015 Test methods for physical parameters of pyrotechnics Part 3: Determination of density of grain column (block) Hydrostatic weighing method

国家市场监督管理总局、中国国家标准化管理委员会, Measuring the Density of Trace Liquids

  • GB/T 40401-2021 Determination of density by volumetric displacement—Skeleton density by gas pycnometry
  • GB/T 21451.5-2019 Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 5: Measurement of temperature in marine vessels
  • GB/T 21451.2-2019 Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 2:Measurement of level in marine vessels
  • GB/T 6324.11-2021 Test method of organic chemical products—Part 11:Determination of trace arsenic in liquid products—Atomic fluorescence spectrometric method

ISA - International Society of Automation, Measuring the Density of Trace Liquids

YU-JUS, Measuring the Density of Trace Liquids

  • JUS H.B8.760-1982 Pesticides. Determiration of specific qravity and density
  • JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content
  • JUS U.C5.092-1994 Liquid flow measurement in open channels by weirs and flumes - End-depth method for estimation of flow in rectangular channels with a free overfall

European Committee for Standardization (CEN), Measuring the Density of Trace Liquids

  • EN ISO 15212-2:2002 Oscillation-type density meters - Part 2: Process instruments for homogenous liquids (ISO 15212-2:2002)
  • FprEN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO/FDIS 748:2021)
  • CEN/TR 16469:2013 Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements
  • prEN ISO 8130-16 Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022)
  • EN ISO 8130-16:2023 Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022)
  • PD CEN/TR 16469:2013 Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements
  • EN ISO 15212-2:2002/AC:2009 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002/Cor 1:2008)
  • EN ISO 9698:2015 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
  • EN 13041:2011 Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space
  • EN ISO 11704:2015 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method (ISO 11704:2010)

AENOR, Measuring the Density of Trace Liquids

  • UNE-ISO 13689:2005 Refrigerated light hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Microwave-type level gauge.
  • UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.
  • UNE 55516:1989 SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF APPARENT DENSITY. METHOD BY MEASURING THE MASS OF A GIVEN VOLUME.
  • UNE-ISO 8310:2005 Refrigerated light hydrocarbon fluids -- Measurement of temperature in tanks containing liquefied gases -- Resistance thermometers and thermocouples
  • UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)

ES-UNE, Measuring the Density of Trace Liquids

  • UNE-EN ISO 748:2023 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
  • UNE-EN 61788-9:2005 Superconductivity -- Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors (Endorsed by AENOR in November of 2005.)
  • UNE-EN 62047-9:2011 Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for MEMS (Endorsed by AENOR in June of 2012.)

German Institute for Standardization, Measuring the Density of Trace Liquids

  • DIN EN ISO 748:2022-12 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021); German version EN ISO 748:2021
  • DIN EN ISO 748:2022 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
  • DIN EN ISO 748:2020 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO/DIS 748:2020); German and English version prEN ISO 748:2020
  • DIN 1996-7:1992 Testing of asphalt; determination of bulk density, compacted density, void content and degree of compaction
  • DIN CEN/TR 16469:2013-04*DIN SPEC 19669:2013-04 Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field mesurements; German version CEN/TR 16469:2013
  • DIN 51774-3:1989-12 Testing of liquid fuels; determination of bromine acceptance by iodometric method (BC)
  • DIN EN ISO 8130-16:2023-04 Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022); German and English version prEN ISO 8130-16:2023 / Note: Date of issue 2023-03-24
  • DIN EN ISO 8130-16:2023 Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022); German and English version prEN ISO 8130-16:2023
  • DIN EN 15761:2022 Pre-shaped growing media - Determination of the dimensions measured and bulk density; German and English version prEN 15761:2021
  • DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
  • DIN EN ISO 15970:2014-09 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008); German version EN ISO 15970:2014
  • DIN 53177:2002-11 Binders for paints and varnishes - Measurement of the dynamic viscosity of liquid resins; Resin solutions and oils by the capillary viscosimeter of isocelses type according to Ubbelohde
  • DIN ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged-type electromagnetic flowmeters - Overall length (ISO 13359:1998)
  • DIN 50451-4:2007 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 4: Determination of 34 elements in ultra pure water by mass spectrometry with inductively coupled plasma (ICP-MS)
  • DIN 54408:2007 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
  • DIN EN ISO 15212-2:2002 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002); German version EN ISO 15212-2:2002
  • DIN ISO 697:1984-01 Surface active agents: washing powders; determination of apparent density; method by measuring the mass of a given volume
  • DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
  • DIN ISO 16586:2012 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
  • DIN CEN/TR 16469:2013 Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field mesurements; German version CEN/TR 16469:2013
  • DIN EN 241:2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method; German version EN 241:2000
  • DIN EN ISO 8130-16:2023-10 Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022); German version EN ISO 8130-16:2023
  • DIN ISO 5884:1989 Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987
  • DIN 65569-2:1992 Aerospace; reinforcement fibres; determination of density of filament yarns; hydrostatic weighing method
  • DIN EN 62047-9:2012-03 Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for MEMS (IEC 62047-9:2011); German version EN 62047-9:2011
  • DIN ISO 697:1984 Surface active agents: washing powders; determination of apparent density; method by measuring the mass of a given volume
  • DIN 51366:2013-12 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
  • DIN ISO 10076:2001 Metallic powders - Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement (ISO 10076:1991)
  • DIN ISO 3939:1978-08 Fluid Power Systems and Components; Multiple Lip Packing Sets, Methods for Measuring Stack Heights
  • DIN 51913:2013 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
  • DIN EN ISO 11704:2015-11 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method (ISO 11704:2010); German version EN ISO 11704:2015 / Note: To be replaced by DIN EN ISO 11704 (2017-10).
  • DIN 51797-4:1981 Testing of liquid fuels; determination of the sodium content; direct determination by atomic absorption spectroscopy
  • DIN ISO 3939:1978 Fluid Power Systems and Components; Multiple Lip Packing Sets, Methods for Measuring Stack Heights
  • DIN 51366:1977 Testing of mineral oil hydrocarbons; measurement of kinematic viscosity by means of the Cannon-Fenske viscometer, for opaque liquids
  • DIN 51366:2013 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
  • DIN 51859:1990 Testing of gaseous fuels and other gases; gravimetric determination of the content of condensate as a function of pressure and temperature

Professional Standard - Nuclear Industry, Measuring the Density of Trace Liquids

  • EJ/T 296.2-2014 Determination of trace uranium in urine liquid fluorometry by ultraviolet

RO-ASRO, Measuring the Density of Trace Liquids

  • STAS 1081-1980 LIQUID SOLUTIONS CONCENTRATION Glossary of terms and units of measure
  • STAS 11071/21-1990 Hierarchy of measuring instruments. Block diagram of hierarchy of measuring instrument for thermal neutrons flux density
  • STAS 11071/9-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR VISCOSITY OF NEWTONIAN LIQUIDS
  • STAS 8972/2-1981 Hydrometry LIQUID FLOOR MEASUREMENT IN OPEN CHANNELS Velocity-area methods
  • STAS SR ISO 5884:1996 Aerospace - Fluid systems and components - Methods for system sampling and measuring the soiid partide contamination of hydraulic fluids
  • STAS 6200/10-1973 SHAPED NATURAL STONES FOR BUILDING Methods of physical, mechanical and mineralogical tests. Delermination of density and volume weight
  • STAS 6200/11-1973 SCHAPED NATURAL STONES FOR BUILDING Methods of physical, mechanical and mineralogical tests. Determination of apparent density and apparent volume weight
  • STAS SR ISO 2211:1994 LIQUID CHEMICAL PRODUCTS - Measurement of colour in Hazen units (platinum-cobalt scale)

API - American Petroleum Institute, Measuring the Density of Trace Liquids

  • API MPMS 14.6 ERTA-1998 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 6 - Continuous Density Measurement
  • API MPMS 14.6-1991 Manual of Petroleum Measurement Standards Chapter 14—Natural Gas Fluid Measurement Section 6—Continuous Density Measurement (Second Edition)
  • API MPMS 7.1-2017 Manual of Petroleum Measurement Standards@ Chapter 7.1 Temperature Determination - Liquid-in-Glass Thermometers (SECOND EDITION)
  • API MPMS 9.1-1981 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Hydrometer Test Method for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products (ASTM D1298)(R 1992)
  • API MPMS 9.1-2002 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Second Edi
  • API MPMS 9.3-1994 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Thermohydrometer Test Method for Density and API Gravity of Crude Petroleum and Liquid Petroleum Products
  • API MPMS 9.3-2002 Manual of Petroleum Measurement Standards Chapter 9—Density Determination Section 3—Standard Test Method for Density@ Relative Density@ and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method (Second Edition)
  • API MPMS 9.1-2012 Manual of Petroleum Measurement Standards Chapter 9.1 - Standard Test Method for Density@ Relative Density@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Third Edition)
  • API MPMS 11.1 VOL V-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume V Table 23B - Generalized Products Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24B - Generalized Products Correction of Volume
  • API MPMS 9.3-2012 Manual of Petroleum Measurement Standards Chapter 9.3 Standard Test Method for Density@ Relative Density@ and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method (Third Edition)

American Society for Testing and Materials (ASTM), Measuring the Density of Trace Liquids

  • ASTM E1109-86(2004) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
  • ASTM E1109-86(1996) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
  • ASTM E1109-86(2009) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
  • ASTM D1122-13 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
  • ASTM UOP851-84 Density of Powders and Solids by Helium Displacement
  • ASTM E344-12 Terminology Relating to Thermometry and Hydrometry
  • ASTM D6822-02(2008) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM C29/C29M-97 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
  • ASTM C29/C29M-97(2003) Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
  • ASTM C29/C29M-17a Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
  • ASTM D7777-13 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
  • ASTM D7777-13(2018)e1 Standard test method for measuring liquid petroleum density, relative density, or API fuel specific gravity using a portable density meter/hydrometer
  • ASTM D3120-08(2019) Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
  • ASTM D5094-90(2003) Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
  • ASTM D6683-01 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids
  • ASTM C559-16(2020) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ASTM D5062-96 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
  • ASTM D5062-09(2017) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
  • ASTM D5062-09(2020) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
  • ASTM D5094-04 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
  • ASTM B873-23 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
  • ASTM C559-16 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ASTM D6683-08 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
  • ASTM B873-21 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
  • ASTM D6752-03e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6752-03 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6752-09 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D7867-13(2020) Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature

Universal Oil Products Company (UOP), Measuring the Density of Trace Liquids

  • UOP 851-2008 Density of Powders and Solids by Helium Displacement

CZ-CSN, Measuring the Density of Trace Liquids

  • CSN 73 1315-1989 Determination of volume mass, den- sity, compactness and porosity of concrete
  • CSN ISO 697:1994 Surface active agents. Washing powders. Determination of apparent density. Method by measuring of a given volume

SE-SIS, Measuring the Density of Trace Liquids

  • SIS SS-ISO 5884:1989 Aerospace — Fluid systems and compo- nents — Methods for system sampling and measuring the solid particle contamination of hydraulic fluids

CU-NC, Measuring the Density of Trace Liquids

  • NC 90-14-34-1988 Standards System for Metrological Assurance. Measurements with Liquid-Filled Glass Thermometers. General Rules

HU-MSZT, Measuring the Density of Trace Liquids

CEN - European Committee for Standardization, Measuring the Density of Trace Liquids

  • EN ISO 9698:2019 Water quality - Tritium - Test method using liquid scintillation counting
  • EN ISO 11704:2018 Water quality - Gross alpha and gross beta activity - Test method using liquid scintillation counting

Professional Standard - Chemical Industry, Measuring the Density of Trace Liquids

  • HG/T 3094-1997 Method for measuring stack height of multi-layer sealing components for hydraulic and pneumatic applications
  • HG/T 3094-1988 Fluid power systems and components-Multiple lip packing sets-Methods for measuring stack heights
  • HG/T 3094-1988(1997) Fluid power systems and componentsMultiple lip packing tsets Methods for measuring stack heights

Danish Standards Foundation, Measuring the Density of Trace Liquids

  • DS/ISO 16586/Corr. 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • DS/ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • DS/ISO 11704:2010 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method
  • DS/ISO 3939:1989 Fluid power systems and components. Multiple lip packing sets. Methods for measuring stack heights
  • DS/ISO 14571:2020 Metallic coatings on non-metallic basis materials – Measurement of coating thickness – Micro-resistivity method
  • DS/EN 62047-9:2011 Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for MEMS
  • DS/EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
  • DS/EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors

ZA-SANS, Measuring the Density of Trace Liquids

  • SANS 319:2008 Measuring systems - Cryogenic liquids and other selected liquid gases in vertical tanks - Pressure differential method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Measuring the Density of Trace Liquids

  • GJB 5382.3-2005 Test methods of physical parameter for pyrotechnic. Part 3: Determination of density for columnar (blocky) sample. Liquid static weighing method

IN-BIS, Measuring the Density of Trace Liquids

TR-TSE, Measuring the Density of Trace Liquids

  • TS 3417-1979 MEASUREMENT OP FLUID PLOW IN CLOSED CONDUITS - VELOCITY AREA METHOD USING PITOT STATIC TUBES

GOSTR, Measuring the Density of Trace Liquids

  • GOST 8.599-2010 State system for ensuring the uniformity of measurements. Density of light petroleum products. The tables for recalculation of density to 15 °С and 20 °С and to conditions of volume's measurement

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Measuring the Density of Trace Liquids

  • GB/T 21451.6-2017 Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)
  • GB/T 21451.3-2017 Petroleum and liquid petroleum products—Measurement of level and temperture in storage tanks by automatic methods—Part 3:Measurement of level in pressurized tanks(non-refrigerated)
  • GB/T 35680-2017 Measuring method for electromagnetic parameters of liquid materials at microwave frequencies using an open-ended coaxial probe
  • GB/T 30537-2014 Superconductivity―Measurements for bulk high temperature superconductors―Trapped flux density of large grain oxide superconductors

BE-NBN, Measuring the Density of Trace Liquids

  • NBN T 63-109-1982 Surface active agents - Washing powders - Determination of apparent density-Method by measuring the mass of a given volume

NL-NEN, Measuring the Density of Trace Liquids

  • NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density
  • NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density

IT-UNI, Measuring the Density of Trace Liquids

Lithuanian Standards Office , Measuring the Density of Trace Liquids

  • LST ISO 4266-5:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 5: Measurement of temperature in marine vessels (idt ISO 4266-5:2002)
  • LST ISO 4266-1:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 1: Measurement of level in atmospheric tanks (idt ISO 4266-1:2002)
  • LST ISO 4266-2:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 2: Measurement of level in marine vessels (idt ISO 4266-2:2002)
  • LST ISO 4266-4:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 4: Measurement of temperature in atmospheric tanks (idt ISO 4266-4:2002)
  • LST ISO 4266-3:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 3: Measurement of level in pressurized storage tanks (non-refrigerated) (idt ISO 4266-3:2002)
  • LST ISO 4266-6:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 6: Measurement of temperature in pressurized storage tanks (non- refrigerated) (idt ISO 4266-6:2002)
  • LST EN 62047-9-2011 Semiconductor devices - Micro-electromechanical devices -- Part 9: Wafer to wafer bonding strength measurement for MEMS (IEC 62047-9:2011)

International Electrotechnical Commission (IEC), Measuring the Density of Trace Liquids

  • IEC 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
  • IEC 62021-1:2003 Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration

European Committee for Electrotechnical Standardization(CENELEC), Measuring the Density of Trace Liquids

  • EN 61788-9:2005 Superconductivity Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors

The American Road & Transportation Builders Association, Measuring the Density of Trace Liquids

  • AASHTO T 295-2008 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method

AASHTO - American Association of State Highway and Transportation Officials, Measuring the Density of Trace Liquids

  • T 19M/T 19-2000 Standard Method of Test for Bulk Density ( Unit Weight ) and Voids in Aggregate

AT-ON, Measuring the Density of Trace Liquids

  • ONORM ISO 697:1986 Surface active agents; washing powders; determination ofapparent density; method by measuring the mass ofa given volume

VN-TCVN, Measuring the Density of Trace Liquids

  • TCVN 4996-1-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 1: Reference method
  • TCVN 6039-3-2008 Plastics.Methods for determining the density of non-cellular plastics.Part 3: Gas pyknometer method
  • TCVN 4996-3-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 3: Routine method
  • TCVN 4996-2-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

Association for Information and Image Management (AIIM), Measuring the Density of Trace Liquids

  • AIIM MS9-1987 Method for Measuring Thickness of Buildup Area on Unitized Microfilm Carriers (Aperture, Camera, Copy, and Image Cards) Addenda - 1996

Association of German Mechanical Engineers, Measuring the Density of Trace Liquids

  • VDI 4253 Blatt 3-2008 Measurement of airborne microorganisms and viruses in ambient air - Culture based method for the quantitative determination of bacteria in air - Method after separation in liquids




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved