ZH
RU
ES

clock

clock, Total:336 items.

In the international standard classification, clock involves: Telecommunication systems, Measurement of time, velocity, acceleration, angular velocity, Electrical accessories, Horology, Graphical symbols, Finances. Banking. Monetary systems. Insurance, Telecommunication terminal equipment, Networking, Materials for aerospace construction, Road vehicle systems, Road vehicles in general, Printed circuits and boards, Audio, video and audiovisual engineering, Linear and angular measurements, Integrated circuits. Microelectronics, Construction of airports, Corrosion of metals, Industrial automation systems, Kitchen equipment, Electricity. Magnetism. Electrical and magnetic measurements, Internal combustion engines for road vehicles, Applications of information technology, Protection against crime, Diagnostic, maintenance and test equipment, Domestic safety, Components and accessories for telecommunications equipment.

International Telecommunication Union (ITU), clock

ITU-T G.8273.2/Y.1368.2-2017 Timing characteristics of telecom boundary clocks and telecom time slave clocks
ITU-T G.8273.2/Y.1368.2-2014 Timing characteristics of telecom boundary clocks and telecom time slave clocks
ITU-T G.8273.2/Y.1368.2 AMD 1-2015 Timing characteristics of telecom boundary clocks and telecom time slave clocks; Amendment 1
ITU-T G.812-2004 Timing requirements of slave clocks suitable for use as node clocks in synchronization networks Study Group 15
ITU-T G.811-1997 Timing Characteristics of Primary Reference Clocks - Series G: Transmission Systems and Media Digital Systems and Networks Digital Transmission Systems - Digital Networks - Design Objectives for Digital Networks Study Group 13; 10 pp
ITU-T G.8272 NOTE-2015 Timing characteristics of primary reference time clocks
ITU-T Y.1367 NOTE-2015 Timing characteristics of primary reference time clocks
ITU-T G.8272/Y.1367-2015 Timing characteristics of primary reference time clocks
ITU-T G.8273/Y.1368-2013 Framework of phase and time clocks
ITU-T G.812 NOTE 1-2005 Timing requirements of slave clocks suitable for use as node clocks in synchronization networks Study Group 13
ITU-T G.8272.1/Y.1367.1-2016 Timing characteristics of enhanced primary reference time clocks
ITU-T G.8273.4/Y.1368.4 AMD 1-2021 Timing characteristics of telecom boundary clocks and telecom time slave clocks for use with partial timing support from the network; Amendment 1
ITU-T G.812 ERRATUM 1-2005 Timing requirements of slave clocks suitable for use as node clocks in synchronization networks; Erratum 1
ITU-T G.8263/Y.1363-2017 Timing characteristics of packet-based equipment clocks
ITU-T G.8262/Y.1362-2015 Timing characteristics of a synchronous Ethernet equipment slave clock
ITU-T G.8272/Y.1367 ERRATUM 1-2015 Timing characteristics of primary reference time clocks; Erratum 1
ITU-T G.8272/Y.1367 AMD 1-2016 Timing characteristics of primary reference time clocks; Amendment 1
ITU-T G.8273.2 AMD 2-2015 Timing characteristics of telecom boundary clocks and telecom time slave clocks Amendment 2 (Study Group 15)
ITU-T G.8272-2012 Timing characteristics of primary reference time clocks Study Group 15
ITU-T Y.1367-2012 Timing characteristics of primary reference time clocks (Study Group 15)
ITU-T Y.1368.4 AMD 1-2021 Timing Characteristics of Telecom Boundary Clocks and Telecom Time Slave Clocks for Use with Partial Timing Support from the Network Amendment 1 (Study Group 15)
ITU-T G.8273.4 AMD 1-2021 Timing Characteristics of Telecom Boundary Clocks and Telecom Time Slave Clocks for Use with Partial Timing Support from the Network Amendment 1 (Study Group 15)
ITU-T G.8263-2012 Timing characteristics of packet-based equipment clocks (Study Group 15)
ITU-T G.8266/Y.1376-2016 Timing characteristics of telecom grandmaster clocks for frequency synchronization
ITU-T G.8272.1/Y.1367.1 AMD 1-2017 Timing characteristics of enhanced primary reference time clocks; Amendment 1
ITU-T Y.1368-2013 Framework of phase and time clocks (Study Group 15)
ITU-T G.8273/Y.1368 AMD 2-2015 Framework of phase and time clocks; Amendment 2
ITU-T G.8273/Y.1368 AMD 1-2015 Framework of phase and time clocks; Amendment 1
ITU-T Y.1363 AMD 1-2013 Timing characteristics of packet-based equipment clocks Amendment 1 (Study Group 15)
ITU-T Y.1363-2012 Timing characteristics of packet-based equipment clocks (Study Group 15)
ITU-T Y.1367 AMD 1-2013 Timing characteristics of primary reference time clocks Amendment 1 (Study Group 15)
ITU-T G.8263/Y.1363 AMD 2-2014 Timing characteristics of packet-based equipment clocks; Amendment 2
ITU-T G.8262/Y.1362 CORR 1-2016 Timing characteristics of a synchronous Ethernet equipment slave clock; Corrigendum 1
ITU-T Y.1368 AMD 1-2015 Framework of phase and time clocks Amendment 1 (Study Group 15)
ITU-T G.8262-2015 Timing characteristics of synchronous Ethernet equipment slave clock (Study Group 15)
ITU-T Y.1362 AMD 1-2012 Timing characteristics of a synchronous Ethernet equipment slave clock Amendment 1 (Study Group 15)
ITU-T G.812 FRENCH-2004 Timing requirements of slave clocks suitable for use as node clocks in synchronization networks Study Group 15
ITU-T G.812 SPANISH-2004 Timing requirements of slave clocks suitable for use as node clocks in synchronization networks Study Group 15
ITU-R BS.2032-2013 Synchronization of digital audio sample clock to video references
ITU-T Y.1362-2007 Timing characteristics of synchronous Ethernet equipment slave clock (EEC) Study Group 15
ITU-T G.8262-2007 Timing characteristics of synchronous Ethernet equipment slave clock (EEC) Study Group 15
ITU-T Y.1363 AMD 2-2014 Timing characteristics of packet-based equipment clocks Amendment 2 (Study Group 15)
ITU-T G.8263 AMD 2-2014 Timing characteristics of packet-based equipment clocks Amendment 2 (Study Group 15)
ITU-T G.812 NOTE-2005 Timing requirements of slave clocks suitable for use as node clocks in synchronization networks (Study Group 13)
ITU-T Y.1362 AMD 1 AMD 1-2012 Timing characteristics of a synchronous Ethernet equipment slave clock Amendment 1 Study Group 15
ITU-T G.8262 AMD 2-2012 Timing characteristics of a synchronous Ethernet equipment slave clock Amendment 2 Study Group 15
ITU-T G.8262 AMD 1-2008 Timing characteristics of synchronous Ethernet equipment slave clock (EEC) Amendment 1 Study Group 15
ITU-T Y.1362 AMD 1-2008 Timing characteristics of synchronous Ethernet equipment slave clock (EEC) Amendment 1 Study Group 15
ITU-T G.8262 AMD 2-2010 Timing characteristics of a synchronous Ethernet equipment slave clock (EEC) Amendment 2 Study Group 15

Henan Provincial Standard of the People's Republic of China, clock

DB41/T 1445-2017 clock calibrator

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, clock

CEPT T/CS 20-18-1981 Caracteristique Horloge Temps Reel

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, clock

JEDEC JEP152-2007 DDR2 DIMM Clock Skew Measurement Procedure Using A Clock Reference Board
JEDEC JESD82-8.01-2004 Standard for Definition of CU877 PLL Clock Driver for Registered DDR2 DIMM Applications
JEDEC JESD82-11-2004 Standard for Definition of CU878 PLL Clock Driver for Registered DDR2 DIMM Applications
JEDEC JESD82-15-2005 Standard for Definition of CUA878 PLL Clock Driver for Registered DDR2 DIMM Applications
JEDEC JESD82-21-2007 Standard for Definition of CUA845 PLL Clock Driver for Registered DDR2 DIMM Applications
JEDEC JESD82-2000 Definition of CDCV857 PLL Clock Driver for Registered DDR DIMM Applications
JEDEC JESD82-1A-2004 Definition of CVF857 PLL Clock Driver for Registered PC1600, PC2100, PC2700 a n d PC3200 DIMM Applications
JEDEC JESD82-18A-2007 Standard for Definition of CUA877 and CU2A877 PLL Clock Drivers for for Registered DDR2 DIMM Applications

Korean Agency for Technology and Standards (KATS), clock

KS B 5309-1992 Clocks with chart drum
KS B 5431-1997(2012) Watches and clocks - Accuracy indication
KS R 1109-1997(2002) ROAD VEHICLES-TEST METHOD FOR THE DIRECT DRIVER'S FIELD OF VIEW

National Metrological Verification Regulations of the People's Republic of China, clock

JJG 722-2018 Standard Digital Clocks
JJG 722-1991 Varification Regulation of Standard Digital Clock
JJG 106-1981 Verification Regulation of Chronometer with Pointer Indication

U.S. Air Force, clock

AIR FORCE MIL-PRF-32144 REV B-2012 CLOCK, AIRCRAFT, ELECTRONIC
AIR FORCE MIL-PRF-32144 REV A-2007 CLOCK, AIRCRAFT, ELECTRONIC
AIR FORCE MIL-C-38207 A VALID NOTICE 3-2008 CLOCK AIRCRAFT, MECHANICAL ABU-11/A
AIR FORCE QPL-38207-2013 Clock Aircraft, Mechanical ABU-11/A
AIR FORCE QPL-38207-9-2000 CLOCK, AIRCRAFT, MECHANICAL ABU-11/A

IETF - Internet Engineering Task Force, clock

RFC 7273-2014 RTP Clock Source Signalling
RFC 7160-2014 Support for Multiple Clock Rates in an RTP Session

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, clock

ITU-T Y.1368.2-2017 Timing characteristics of telecom boundary clocks and telecom time slave clocks (Study Group 15)
ITU-T G.8273.2-2014 Timing characteristics of telecom boundary clocks and telecom time slave clocks (Study Group 15)
ITU-T G.8273.2 AMD 2-2019 Timing characteristics of telecom boundary clocks and telecom time slave clocks Amendment 2 (Study Group 15)
ITU-T G.8273.2 AMD 1-2015 Timing characteristics of telecom boundary clocks and telecom time slave clocks Amendment 1 (Study Group 15)
ITU-T Y.1368.2 AMD 1-2017 Timing characteristics of telecom boundary clocks and telecom time slave clocks Amendment 1 (Study Group 15)
ITU-T G.8272-2018 Timing characteristics of primary reference time clocks (Study Group 15)
ITU-T G.8272-2015 Timing characteristics of primary reference time clocks (Study Group 15)
ITU-T Y.1367-2015 Timing characteristics of primary reference time clocks (Study Group 15)
ITU-T Y.1368.3-2017 Timing characteristics of telecom transparent clocks (Study Group 15)
ITU-T G.8273.3-2017 Timing characteristics of telecom transparent clocks (Study Group 15)
ITU-T Y.1368-2018 Framework of phase and time clocks (Study Group 15)
ITU-T G.8273-2018 Framework of phase and time clocks (Study Group 15)
ITU-T G.8272.1-2016 Timing characteristics of enhanced primary reference time clocks (Study Group 15)
ITU-T Y.1367.1-2016 Timing characteristics of enhanced primary reference time clocks (Study Group 15)
ITU-T G.811.1-2017 Timing characteristics of enhanced primary reference clocks (Study Group 15)
ITU-T G.811 AMD 1-2016 Timing characteristics of primary reference clocks Amendment 1 (Study Group 13)
ITU-T G.8272 AMD 1-2013 Timing characteristics of primary reference time clocks Amendment 1 (Study Group 15)
ITU-T G.8272 AMD 1-2016 Timing characteristics of primary reference time clocks Amendment 1 (Study Group 15)
ITU-T Y.1367 AMD 1-2016 Timing characteristics of primary reference time clocks Amendment 1 (Study Group 15)
ITU-T G.8263-2017 Timing characteristics of packet-based equipment clocks (Study Group 15)
ITU-T Y.1363-2017 Timing characteristics of packet-based equipment clocks (Study Group 15)
ITU-T G.8262.1-2019 Timing characteristics of enhanced synchronous equipment slave clock (Study Group 15)
ITU-T Y.1368.3 AMD 1-2018 Timing characteristics of telecom transparent clocks Amendment 1 (Study Group 15)
ITU-T G.8273.3 AMD 1-2018 Timing characteristics of telecom transparent clocks Amendment 1 (Study Group 15)
ITU-T G.8262 NOTE-2009 Timing characteristics of synchronous Ethernet equipment slave clock (EEC) (Study Group 15)
ITU-T G.8273 AMD 2-2015 Framework of phase and time clocks Amendment 2 (Study Group 15)
ITU-T Y.1376-2016 Timing characteristics of telecom grandmaster clocks for frequency synchronization (Study Group 15)
ITU-T G.8266-2016 Timing characteristics of telecom grandmaster clocks for frequency synchronization (Study Group 15)
ITU-T G.8272.1 AMD 1-2017 Timing characteristics of enhanced primary reference time clocks Amendment 1 (Study Group 15)
ITU-T Y.1367.1 AMD 1-2017 Timing characteristics of enhanced primary reference time clocks Amendment 1 (Study Group 15)
ITU-T G.8262 CORR 1-2016 Timing characteristics of synchronous Ethernet equipment slave clock Corrigendum 1 (Study Group 15)
ITU-T Y.1362 CORR 1-2016 Timing characteristics of synchronous Ethernet equipment slave clock Corrigendum 1 (Study Group 15)
ITU-T G.813 CORR 2-2016 Timing characteristics of SDH equipment slave clocks (SEC) Corrigendum 2 (Study Group 15)
ITU-T Y.1376 AMD 1-2018 Timing characteristics of telecom grandmaster clocks for frequency synchronization Amendment 1 (Study Group 15)
ITU-T G.8266 AMD 1-2018 Timing characteristics of telecom grandmaster clocks for frequency synchronization Amendment 1 (Study Group 15)
ITU-T G.812-1998 Timing Requirements of Slave Clocks Suitable for Use as Node Clocks in Synchronization Networks - Series G: Transmission Systems and Media@ Digital Systems and Networks - Digital Transmission Systems - Digital Networks - Design Objectives for Digital Netw

Underwriters Laboratories (UL), clock

UL 917 BULLETIN-2003 Clock-Operated Switches
UL 917 BULLETIN-2002 UL Standard for Safety Clock-Operated Switches
UL 917 BULLETIN-2013 UL Standard for Safety Clock-Operated Switches (COMMENTS DUE: May 27@ 2013)
UL 887 BULLETINS-2005 Delayed-Action Timelocks / Note: revision of ANSI/UL 887-1994 * Approved 2004-01-28.
UL 917 BULLETIN-2015 UL Standard for Safety Clock-Operated Switches (COMMENTS DUE: July 3@ 2015)

PL-PKN, clock

PN T82141-1962 Telecommunication e?uipment. Char- geable time clock
PN M54780-1952 Recording instruments -- Clock mechanisms -- Classification

German Institute for Standardization, clock

DIN 8270-2:1987 Hands for clocks; lengths
DIN 8327:1982 Label for watches and clocks
DIN 41091-3:1976 Dials for electric clocks; hour-stroke dials
DIN 8313-2:1977 Technical requirements and verification for clocks and clockmovements with electrical energy source; frequency of resonator 1000 Hz, terms of delivery for clock movements
DIN 8327 Bb.1:1982 Label for watches and clocks; example for label-datas
DIN 8270-1:1988 Hands for clocks; fitting dimensions, fits, combinations of dimensions
DIN 41079:1974 Fastening of clockworks an dials for electric secundary clocks; mounting dimensions
DIN EN 300462-6-1:2000-06 Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 6-1: Timing characteristics of primary reference clocks (Endorsement of the English version EN 300462-6-1 V 1.1.1 (1998-05) as German standard) / Note: Endors...
DIN EN 300462-6-1:2000 Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 6-1: Timing characteristics of primary reference clocks (Endorsement of the English version EN 300462-6-1 V 1.1.1 (1998-05) as German standard)
DIN EN 301259:2000 Private Integrated Services Network (PISN) - Inter-exchange signalling protocol - Private Integrated Network eXchange (PINX) clock synchronization (ISO/IEC 15507 (1997), modified) (Endorsement of the English version EN 301259 V 1.1.1 (1998-10) as German s

Military Standard of the People's Republic of China-General Armament Department, clock

GJB 817-1990 Mechanical clock for ships
GJB 2162A-2012 General specification for aviation clock
GJB 2162-1994 Specification for mechanical aeronautical clocks

Conference of European Post Telecommunication (CEPT), clock

CEPT T/CS 20-18 E-1981 Real Time Clock; (ETSI ETR 202:1995)

工业和信息化部, clock

YD/T 4054-2022 Telecom Equipment Precision Time Protocol (PTP) Boundary Clock and Slave Clock Test Methods
YD/T 3419-2018 Packet Bearer Equipment Precision Time Protocol (PTP) Boundary Clock and Slave Clock Performance Requirements
QB/T 5385-2019 Clock with balance spring oscillating system
YD/T 3012-2016 Access network technology requires that the DSL system support clock synchronization and time synchronization

US-FCR, clock

FCR FED FCGS 16570-1972 WATCHMAN'S CLOCK SYSTEM
FCR FED H-08-4 VOL 4-E-NC-5-1988 ELEVATION "A"-CODE ONE ALARM, CLOCK, GROUND FAULT METER & RECEPTACLE
FCR FED H-08-4 VOL 4-E-NC-6-1988 CLOCK, "CODE ONE" ALARM, AND GROUND FAULT METER FOR USE WITH NURSE CONSOLES

IN-BIS, clock

IS 14145-1994 Mains operated clocks - specification
IS 5160-1969
IS 10996-1984
IS 12472-1988
IS 8969-1978

Taiwan Provincial Standard of the People's Republic of China, clock

CNS 8662-1982 Graphic Symbols for Clocks and Electrical Time Service Devices
CNS 8663-1982 Graphic Symbols for Components for Precision Engineering Devices, Especially Clocks

Professional Standard - Finance, clock

JR/T 0084-2012 Network time synchronization specification for securities and futures industry

HU-MSZT, clock

MSZ 6278-1957

Professional Standard - Post and Telecommunication, clock

YD/T 900-1997 Technical requirement for SDH equipment - clock
YD/T 1012-1999 Node clock set of digital synchronization network and its timing feature
YD/T 1479-2006 Technical requirements and testing methods of primary reference clock equipment
YD/T 1355-2005 Technical requirements and test method of Mini-BRTS equipment

National Metrological Technical Specifications of the People's Republic of China, clock

JJF 1662-2017 Calibration Specification for Clock Testers
JJF 1901-2021 Calibration Specification for Analog Clocks
JJF 1206-2008 Calibration Specification for the Remote Calibration for Frequency Standard and Digital Clock

SAE - SAE International, clock

SAE J3076-2015 Clock Extension Peripheral Interface (CXPI)

Society of Automotive Engineers (SAE), clock

SAE J3076-2022 Clock Extension Peripheral Interface (CXPI)

未注明发布机构, clock

GJB 817A-2020 Specification for mechanical clocks for use on ships

RU-GOST R, clock

GOST 3145-1984 Mechanical clocks with signal. General specifications
GOST 577-1968 Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

Alliance of Telecommunications Industry Solutions （ATIS), clock

ATIS T1.TR.6-1990 Slave Stratum Clock Performance Measurement Guidelines

ATIS - Alliance for Telecommunications Industry Solutions, clock

T1.TR.6-1990 Slave Stratum Clock Performance Measurement Guidelines

JSAE - Society of Automotive Engineers of Japan@ Inc., clock

JASO D305-1998 Automotive Parts - Automotive Clock Test
JASO D015-3-2014 Automobiles - Clock Extension Peripheral Interface (CXPI) - Part 3: Protocol specification

Professional Standard - Aerospace, clock

QJ 2460-1993 General technical requirements for satellite clocks

American National Standards Institute （ANSI), clock

ANSI/UL 826-2009 Standard for Safety for Household Electric Clocks
ANSI/IEEE 1588:2008 Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems

Group Standards of the People's Republic of China, clock

T/SXQCTB 002-2023 Technical Specification for Automotive Clock Spring
T/CAICI 62-2023 Technical specification of intelligent clock distribution system
T/CSCP 0005-2022 Material Corrosion Big Data Evaluation Technology—Corrosion Clock Diagram Method

Defense Logistics Agency, clock

DLA SMD-5962-91641 REV B-2010 MICROCIRCUIT, DIGITAL, CMOS, REAL TIME CLOCK, MONOLITHIC SILICON
DLA MIL-M-38510/35 C VALID NOTICE 1-2010 Microcircuits, Digital, Clock Drivers, Monolithic Silicon
DLA SMD-5962-93252-1995 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 1-TO-8 MINIMUM SKEW CLOCK DRIVER WITH MULTIPLEXED CLOCK INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95627 REV E-2011 MICROCIRCUIT, MEMORY, DIGITAL, 1024 X 18 CLOCKED FIFO, MONOLITHIC SILICON
DLA SMD-5962-93196 REV A-2009 MICROCIRCUIT, DIGITAL, CMOS, LOW SKEW PLL CLOCK DRIVER, MONOLITHIC SILICON
DLA SMD-5962-92327 REV B-2009 MICROCIRCUIT, DIGITAL, ECL, 1 TO 9 DIFFERENTIAL CLOCK DRIVER, MONOLITHIC SILICON
DLA SMD-5962-87669-1987 MICROCIRCUITS, DIGITAL, CLOCK GENERATOR AND RESET INTERFACE, MONOLITHIC SILICON
DLA SMD-5962-87526 REV A-1988 MICROCIRCUIT, MONOLITHIC N-CHANNEL SILICON GATE, CLOCK GENERATOR AND CONTROLLER
DLA SMD-5962-92327 REV A-1994 MICROCIRCUIT, DIGITAL, ECL, 1 TO 9 DIFFERENTIAL CLOCK DRIVER, MONOLITHIC SILICON
DLA MIL-M-38510/422A VALID NOTICE 3-2006 MICROCIRCUITS, DIGITAL, SCHOTTKY TTL, CLOCK GENERATOR AND DRIVER, MONOLITHIC SILICON
DLA MIL-M-38510/422A VALID NOTICE 2-2001 MICROCIRCUITS, DIGITAL, SCHOTTKY TTL, CLOCK GENERATOR AND DRIVER, MONOLITHIC SILICON
DLA MIL-M-38510/422A-1983 MICROCIRCUITS, DIGITAL, SCHOTTKY TTL, CLOCK GENERATOR AND DRIVER, MONOLITHIC SILICON
DLA DSCC-VID-V62/13603-2013 MICROCIRCUIT, LINEAR, 2.5 V TO 3.3 V HIGH PERFORMANCE CLOCK BUFFER, MONOLITHIC SILICON
DLA SMD-5962-84068 REV E-2005 MICROCIRCUIT, DIGITAL, CMOS, CLOCK GENERATOR DRIVER, MONOLITHIC SILICON
DLA SMD-5962-95627 REV D-2005 MICROCIRCUIT, MEMORY, DIGITAL, 1024 X 18 CLOCKED FIFO, MONOLITHIC SILICON
DLA SMD-5962-94696 REV B-2005 MICROCIRCUIT, DIGITAL, ECL, LOW SKEW QUAD CLOCK DRIVER, MONOLITHIC SILICON
DLA SMD-5962-05214 REV B-2013 MICROCIRCUIT, DIGITAL, CMOS, RADIATION HARDENED, PROGRAMMABLE SKEW CLOCK BUFFER, MONOLITHIC SILICON
DLA SMD-5962-78008 REV H-2005 MICROCIRCUIT, DIGITAL, MOS CLOCK DRIVERS, MONOLITHIC SILICON
DLA SMD-5962-91641 REV A-2005 MICROCIRCUIT, DIGITAL, CMOS, REAL TIME CLOCK, MONOLITHIC SILICON
DLA SMD-5962-93176 REV A-1994 MICROCIRCUIT, DIGITAL, CMOS, LOW SKEW CLOCK DRIVER WITH RESET, MONOLITHIC SILICON
DLA DSCC-VID-V62/12618-2012 MICROCIRCUIT, DIGITAL, 200 MHz GENERAL PURPOSE CLOCK BUFFER, PCI-X COMPLIANT, MONOLITHIC SILICON
DLA DSCC-VID-V62/12618 REV A-2013 MICROCIRCUIT, DIGITAL, 200 MHz GENERAL PURPOSE CLOCK BUFFER, PCI-X COMPLIANT, MONOLITHIC SILICON
DLA SMD-5962-92174 REV C-2010 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 1-TO-8 MINIMUM SKEW CLOCK DRIVER, MONOLITHIC SILICON
DLA SMD-5962-92174 REV D-2010 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 1-TO-8 MINIMUM SKEW CLOCK DRIVER, MONOLITHIC SILICON
DLA DSCC-VID-V62/12624-2012 MICROCIRCUIT, LINEAR, LOW VOLTAGE 1:10 LVPECL WITH SELECTABLE INPUT CLOCK DRIVER, MONOLITHIC SILICON
DLA SMD-5962-97540 REV B-2012 MICROCIRCUIT, DIGITAL, 3.3 V PHASE LOCK LOOP CLOCK DRIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-88598 REV A-1990 MICROCIRCUITS, DIGITAL, BIPOLAR CLOCK GENERATOR/MICROCYCLE LENGTH CONTROLLER, MONOLITHIC SILICON
DLA SMD-5962-93112-1994 MICROCIRCUIT, DIGITAL, CMOS, PROGRAMMABLE SKEW CLOCK BUFFER, MONOLITHIC SILICON
DLA SMD-5962-07230-2009 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, 3.3-V HIGH PERFORMANCE CLOCK SYNCHRONIZER AND JITTER CLEANER, MONOLITHIC SILICON
DLA SMD-5962-96566 REV G-2010 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, RADIATION HARDENED, SYNCHRONOUS 4-BIT UP/DOWN DUAL CLOCK COUNTER, MONOLITHIC SILICON
DLA SMD-5962-96566 REV H-2012 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, RADIATION HARDENED, SYNCHRONOUS 4-BIT UP/DOWN DUAL CLOCK COUNTER, MONOLITHIC SILICON
DLA DSCC-VID-V62/12656-2013 MICROCIRCUIT, LINEAR, 1.2 GHz CLOCK DISTRIBUTION IC, 1.6 GHz INPUTS, DIVIDERS, FIVE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-95608 REV B-2006 MICROCIRCUIT, MEMORY, DIGITAL, 1K X 36 DUAL PORT CLOCKED FIFO, MONOLITHIC SILICON
DLA SMD-5962-93196-1994 MICROCIRCUIT, DIGITAL, CMOS, LOW SKEW PLL CLOCK DRIVER, MONOLITHIC SILICON
DLA SMD-5962-97540 REV A-2002 MICROCIRCUIT, DIGITAL, 3.3 V PHASE LOCK LOOP CLOCK DRIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-87734 REV B-1992 MICROCIRCUIT, DIGITAL, CMOS, CLOCK GENERATOR AND READY INTERFACE, MONOLITHIC SILICON
DLA SMD-5962-95715-1996 MICROCIRCUIT, DIGITAL, CMOS, CLOCK GENERATOR DRIVER, MONOLITHIC SILICON
DLA SMD-5962-96566 REV F-2008 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, RADIATION HARDENED, SYNCHRONOUS 4-BIT UP/DOWN DUAL CLOCK OUNTER, MONOLITHIC SILICON
DLA SMD-5962-88702 REV B-2010 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D-TYPE FLIP-FLOP WITH CLOCK ENABLE, MONOLITHIC SILICON
DLA SMD-5962-92190 REV C-2013 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D FLIP-FLOP WITH CLOCK ENABLE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-87627 REV D-2009 MICROCIRCUIT, DIGITAL, FAST CMOS, OCTAL D FLIP-FLOP WITH CLOCK ENABLE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96697 REV A-2008 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 1-LINE TO 8-LINE CLOCK DRIVER, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-89749 REV B-2008 MICROCIRCUITS, DIGITAL, ADVANCED CMOS, UP/DOWN BINARY COUNTER WITH PRESET AND RIPPLE CLOCK, MONOLITHIC SILICON
DLA SMD-5962-96753 REV B-2009 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, RADIATION HARDENED, CLOCK AND WAIT-STATE GENERATION CIRCUIT, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/04757 REV A-2011 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 1-LINE TO 10-LINE CLOCK DRIVER WITH 3-STATE OUTPUTS, MONOLITHIC SILICON

U.S. Military Regulations and Norms, clock

ARMY MIL-DTL-62739 A VALID NOTICE 1-2004 PRINTED WIRING ASSEMBLY, CLOCK/DISPLAY DRIVER
ARMY MIL-DTL-62739 A-1998 PRINTED WIRING ASSEMBLY, CLOCK/DISPLAY DRIVER

Professional Standard - Electron, clock

SJ/T 10613-1995 Gerneral specification for clock and station mark generators

RO-ASRO, clock

STAS 11200/184-1980 Graphical symbols= GRAPHICAL SYMBOL FOR CLOCK, TIME SWITCH AND TIMER

CZ-CSN, clock

Canadian Standards Association (CSA), clock

CSA C22.2 No.177-92-CAN/CSA-1992(R2007) Clock-Operated Switches Second Edition; General Instruction No 1-2
CAN/CSA-E60335-2-26-2013 Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks (Third Edition)

British Standards Institution (BSI), clock

BS ISO 23346:2020 Radio-controlled clocks. Signal receiving measurement method
BS ISO 20794-2:2020 Road vehicles. Clock extension peripheral interface (CXPI) - Application layer
BS IEC 61588:2008 Precision clock synchronization protocol for networked measurement and control systems
BS IEC 61588:2021 Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
BS EN 60335-2-26:2003+A11:2020 Household and similar electrical appliances. Safety - Particular requirements for clocks
19/30375044 DC BS ISO 23346. Radio-controlled clocks. Signal receiving measurement methods
BS ISO 20794-3:2020 Road vehicles. Clock extension peripheral interface (CXPI) - Transport and network layer
BS ISO 20794-4:2020 Road vehicles. Clock extension peripheral interface (CXPI) - Data link layer and physical layer
BS ISO 20794-5:2020 Road vehicles. Clock extension peripheral interface (CXPI). Application layer conformance test plan
BS ISO 14229-8:2020 Road vehicles. Unified diagnostic services (UDS) - UDS on Clock eXtension Peripheral Interface (UDSonCXPI)
19/30355167 DC BS ISO 20794-2. Road vehicles. Clock extension peripheral interface (CXPI). Part 2. Application layer
BS ISO 20794-6:2020 Road vehicles. Clock extension peripheral interface (CXPI) - Transport and network layer conformance test plan
BS EN 60 335-2-26:1991 Specification for safety of household and similar electrical appliances. Particular requirements. Clocks
19/30355170 DC BS ISO 20794-3. Road vehicles. Clock extension peripheral interface (CXPI). Part 3. Transport and network layer
BS ISO 20794-7:2020 Road vehicles. Clock extension peripheral interface (CXPI). Data link and physical layer conformance test plan
15/30331109 DC BS EN 60335-2-26 AMD11. Household and similar electrical appliances. Safety. Part 2-26. Particular requirements for clocks
19/30355173 DC BS ISO 20794-4. Road vehicles. Clock extension peripheral interface (CXPI). Part 4. Data link layer and physical layer

BELST, clock

STB 836-2004 Personnel services. Clock desk, wall and alarm-clock mechanical repaired. Specifications

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, clock

GB 12048-1989 Requirements for clock and synchronization equipment used in the digital network
GB/T 15838-2008 Test methods for the performances of switching equipment clocks in digital network
GB/T 25931-2010 Precision clock synchronization protocol for networked measurement and control systems
GB/T 15838-1995 Measuring methods for the performances of switching equipment clocks in digital synchronous network
GB 4706.70-2003 Safety of household and similar electrical appliances Particular requirements for clocks
GB 4706.70-2008 Household and similar electrical appliances.Safety.Particular requirements for clocks
GB/T 13158-1991 Compatibility test procedures of clock and synchroni-zation equipment of digital switch introduced into di-gital network
GB 13158-1991 Compatibility test method for clock and synchronization equipment of digital switches entering digital network

Professional Standard - Civil Aviation, clock

MH/T 5019-2004 Design code for clock system engineering of civil airport terminal building
MH/T 5019-2016 Code for engineering design of clock system in civil transport airport terminal

Institute of Electrical and Electronics Engineers (IEEE), clock

IEEE P1588a/D3.0, April 2022 IEEE Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems Amendment: Enhancements for Best Master Clock Algorithm (BMCA) Mechanisms
IEEE P1588a/D3.5, June 2023 IEEE Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems Amendment: Precision Time Protocol (PTP) Enhancements for Best Master Clock Algorithm (BMCA) Mechanisms
IEEE P1588a/D3.4, April 2023 IEEE Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems Amendment: Precision Time Protocol (PTP) Enhancements for Best Master Clock Algorithm (BMCA) Mechanisms
IEEE 1588-2002 Precision clock synchronization protocol for networked measurement and control systems
IEEE 1588-2008 Precision clock synchronization protocol for networked measurement and control systems
IEEE 1588/INT 1-10-2009 IEEE Standards Interpretations for IEEE Std 1588 ™-2008 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE Unapproved Draft Std P1588/D2.2, Mar 2008 IEEE Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE 1588-2019 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE Std 1588-2008 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE Std 1588-2002 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE 1588*IEC 61588-2004 IEC/IEEE International Standard - Precision clock synchronization protocol for networked measurement and control systems
IEEE 61588-2004 IEC/IEEE International Standard - Precision clock synchronization protocol for networked measurement and control systems
IEEE Std 1588-2019 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEC 61588:2009(E) IEC/IEEE International Standard - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEC/IEEE 61588-2021 IEC/IEEE International Standard - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE P1588/D1.4V4, September 2018 IEEE Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE P1588/D1.6, August 2019 IEEE Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE P1588/D1.5, May 2019 IEEE Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE Unapproved Draft Std P1588_D2.2, Jan 2008 IEEE Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEC/IEEE 61588:2021 IEC/IEEE International Standard - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE/IEC 61588-2009 IEC/IEEE International Standard - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE/IEC 61588-2021 IEC/IEEE International Standard - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE 1588 IEC 61588 First edition 2004-09 IEC/IEEE International Standard - Precision clock synchronization protocol for networked measurement and control systems
SMPTE EG 35:1999 EG 35:1999 - SMPTE Engineering Guideline - Time and Control Code Time Address Clock Precision for Television, Audio and Film
SMPTE EG 35:2012 EG 35:2012 - SMPTE Engineering Guideline - Time and Control Code Time Address Clock Precision for Television, Audio and Film
EG 35:2012 EG 35:2012 - SMPTE Engineering Guideline - Time and Control Code Time Address Clock Precision for Television, Audio and Film
IEEE P1588c/D1.4, March 2023 IEEE Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems Amendment: Clarification of Terminology

International Electrotechnical Commission (IEC), clock

IEC 61588:2021*IEEE Std 1588 Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEC 61588:2009 Precision clock synchronization protocol for networked measurement and control systems
IEC 61588:2004 Precision clock synchronization protocol for networked measurement and control systems
IEC 61588:2021 Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEC 60335-2-26:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
IEC 60335-2-26:2008 Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks

Danish Standards Foundation, clock

DS/IEC 61588:2009 Precision clock synchronization protocol for networked measurement and control systems
DS/IEC 61588:2021 Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
DS/EN 300462-6-1:2003 Transmission and Multiplexing (TM); Generic requirements for synchronization networks; Part 6-1: Timing characteristics of primary reference clocks
DS/EN 60335-2-26/A1:2008 Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
DS/EN 60335-2-26:2003 Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
DS/ISO 20794-5:2020 Road vehicles – Clock extension peripheral interface (CXPI) – Part 5: Application layer conformance test plan

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., clock

IEEE 1588-2004 Precision clock synchronization protocol for networked measurement and control systems
IEEE 1588 INT 1-10-2009 A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE 1588 INT 1-2005 A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE P1588/D1.5-2019 Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems

CU-NC, clock

NC 90-11-11-1986 Metrological Assurance. Chess Mechanical Clock. Verification Means and Methods
NC 90-11-13-1987 Metrological Assurance. Installations to Verify Clocks. Methods and Means of Verification
NC 90-11-12-1986 Metrological Assurance. Time Delay Measurement. Measurement Methods and Means

CN-QIYE, clock

Q/GDW 11179.12-2015 Technical Specifications for Components Used in Energy Meters Part 12: Clock Chips

European Telecommunications Standards Institute (ETSI), clock

ETSI ETR 202-1995 Public Switched Telephone Network (PSTN); Real Time Clock; (CEPT Recommendation T/CS 20-18 E (1981))
ETSI PRETS 300 462-6-1997 Transmission and Multiplexing (TM); Generic Requirements for Synchronization Networks; Part 6: Timing Characteristics of Primary Reference Clocks
ETSI PRETS 300 462-6-1998 Transmission and Multiplexing (TM); Generic Requirements for Synchronization Networks; Part 6: Timing Characteristics of Primary Reference Clocks
ETSI EN 300 462-6-1-1998 Transmission and Multiplexing (TM); Generic Requierements for Synchronization Networks; Part 6-1: Timing Characteristics of Primary Reference Clocks (V1.1.1)
ETSI PRETS 300 462-5-1996 Transmission and Multiplexing (TM); Generic Requirements for Synchronization Networks; Part 5: Timing Characteristics of Slave Clocks Suitable for Operation in Synchronous Digital Hierarchy (SDH) Equipment
ETSI PRETS 300 462-5-1995 Transmission and Multiplexing (TM); Generic Requirements for Synchronization Networks; Part 5: Timing Characteristics of Slave Clocks Suitable for Operation in Synchronous Digital Hierarchy (SDH) Equipment

ETSI - European Telecommunications Standards Institute, clock

ETR 202-1995 Public Switched Telephone Network (PSTN); Real Time Clock; (CEPT Recommendation T/CS 20-18 E (1981))
PRETS 300 462-6-1998 Transmission and Multiplexing (TM); Generic Requirements for Synchronization Networks; Part 6: Timing Characteristics of Primary Reference Clocks
PRETS 300 462-6-1997 Transmission and Multiplexing (TM); Generic Requirements for Synchronization Networks; Part 6: Timing Characteristics of Primary Reference Clocks
ETSI EN 300 462-6-1:1998 Transmission and Multiplexing (TM); Generic Requierements for Synchronization Networks; Part 6-1: Timing Characteristics of Primary Reference Clocks (V1.1.1)

Society of Motion Picture and Television Engineers (SMPTE), clock

SMPTE EG 35-1999 Time and Control Code Time Address Clock Precision for Television, Audio and Film
SMPTE EG 35-2012 Time and Control Code Time Address Clock Precision for Television, Audio and Film

KR-KS, clock

KS R ISO 20794-2-2023 Road vehicles Clock extension peripheral interface(CXPI) Part 2: Application layer
KS C IEC 60335-2-26-2013(2023) Household and similar electrical appliances－Safety－Part 2-26：Particular requirements for clocks

International Organization for Standardization (ISO), clock

ISO 20794-3:2020 Road vehicles — Clock extension peripheral interface (CXPI) — Part 3: Transport and network layer
ISO 20794-4:2020 Road vehicles — Clock extension peripheral interface (CXPI) — Part 4: Data link layer and physical layer
ISO 20794-2:2020 Road vehicles — Clock extension peripheral interface (CXPI) — Part 2: Application layer
ISO 20794-5:2020 Road vehicles — Clock extension peripheral interface (CXPI) — Part 5: Application layer conformance test plan
ISO 20794-6:2020 Road vehicles — Clock extension peripheral interface (CXPI) — Part 6: Transport and network layer conformance test plan

Association Francaise de Normalisation, clock

NF C73-826:1996 Safety of household and similar electrical appliances. Part 2 : particular requirements for clocks.
NF C73-826/A11*NF EN 60335-2-26/A11:2020 Household and similar electrical appliances - Safety - Part 2-26 : particular requirements for clocks
NF EN 60335-2-26/A1:2008 Appareils électrodomestiques et analogues - Sécurité - Partie 2-26 : règles particulières pour les horloges
NF EN 60335-2-26:2005 Appareils électrodomestiques et analogues - Sécurité - Partie 2-26 : règles particulières pour les horloges
NF EN 300462-6-1:2000 Télécommunications - Transmission et Multiplexage (TM) - Prescriptions génériques pour réseaux de synchronisation - Partie 6-1 : caractéristiques de rythme des horloges de référence primaires
NF EN 62054-21/A1:2017 Équipement de comptage d'électricité (C.A.) - Tarification et contrôle de charge - Partie 21 : exigences particulières pour les horloges de tarification
NF EN 62054-21:2006 Équipement de comptage de l'électricité (c.a.) - Tarification et contrôle de charge - Partie 21 : prescriptions particulières pour horloges de tarification
NF EN 300462-4-1:2000 Télécommunications - Transmissions et Multiplexage (TM) - Prescriptions génériques pour réseaux de synchronisation - Partie 4-1 : caractéristiques de rythme des équipements d'horloges asservies permettant la synchronisation des équipements de ...

ECMA - European Association for Standardizing Information and Communication Systems, clock

ECMA 245-1996 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - PINX Clock Synchronization

Standard Association of Australia （SAA）, clock

AS 1284.7:1994 Electricity metering Part 7: Internal clocks for meters and load control devices

Lithuanian Standards Office , clock

LST EN 300 462-6-1 V1.1.1-2005 Transmission and Multiplexing (TM); Generic requirements for synchronization networks; Part 6-1: Timing characteristics of primary reference clocks
LST EN 60335-2-26-2004 Household and similar electrical appliances. Safety. Part 2-26: Particular requirements for clocks (IEC 60335-2-26:2002)
LST EN 60335-2-26-2004/A1-2008 Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks (IEC 60335-2-26:2002/A1:2008)

VN-TCVN, clock

TCVN 5699-2-26-2007 Household and similar electrical appliances.Safety.Part 2-26: Particular requirements for clocks

AENOR, clock

UNE-EN 60335-2-26:2003/A1:2008 Household and similar electrical appliances - Safety -- Part 2-26: Particular requirements for clocks
UNE-EN 60335-2-26:2003 Household and similar electrical appliances - Safety -- Part 2-26: Particular requirements for clocks

ES-UNE, clock

UNE-EN 60335-2-26:2003/A11:2020 Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks

ZA-SANS, clock

SANS 60335-2-26:2003 Household and similar electrical appliances - Safety Part 2-26: Particular requirements for clocks
SANS 60335-2-26:2009 Household and similar electrical appliances - Safety Part 2-26: Particular requirements for clocks

国家市场监督管理总局、中国国家标准化管理委员会, clock

GB/T 38844-2020 Smart factory—General specification for time synchronization, time management and test in industry automation system

ES-AENOR, clock

UNE 20 004 h5

IX-ECMA, clock

ECMA 245-1997 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - PINX Clock Synchronization (SYNC-SIG)