ZH
RU
ES

multiple internal standard method

multiple internal standard method, Total:500 items.

In the international standard classification, multiple internal standard method involves: Nuclear energy engineering, Applications of information technology, Fasteners for aerospace construction, Meat, meat products and other animal produce, Medical sciences and health care facilities in general, Wastes, Raw materials for rubber and plastics, Biology. Botany. Zoology, Astronomy. Geodesy. Geography, Adhesives, Microbiology, Products of the chemical industry, Analytical chemistry, Internal combustion engines, Optics and optical measurements, Ceramics, Leather technology, Veterinary medicine, Industrial trucks, Tyres, Lifting equipment, General methods of tests and analysis for food products, Soil quality. Pedology, Farming and forestry, Pesticides and other agrochemicals, Food products in general, Burners. Boilers, Water quality, Plastics, Laboratory medicine, Telecommunication systems, Road vehicle systems, Lamps and related equipment, Road engineering, Road vehicles in general, Construction materials, Structures of buildings, Particle size analysis. Sieving, Waxes, bituminous materials and other petroleum products, Earthworks. Excavations. Foundation construction. Underground works, Transport, Metalliferous minerals, Milk and milk products, Petroleum products in general, Standardization. General rules, Pipeline components and pipelines, Paint ingredients, Domestic, commercial and industrial heating appliances, Vocabularies, Test conditions and procedures in general, Refractories, Open systems interconnection (OSI), Electricity. Magnetism. Electrical and magnetic measurements, Radiocommunications, Kitchen equipment, Geology. Meteorology. Hydrology, Organic chemicals, Shipbuilding and marine structures in general, Cycles, Iron and steel products, Buildings, Air quality, Materials for the reinforcement of composites, Fuels, Linear and angular measurements, Quality, Paints and varnishes, Software development and system documentation, Resistors, Ferrous metals, Paper and board, Measurement of volume, mass, density, viscosity, Fruits. Vegetables, Materials for aerospace construction, Space systems and operations, Electrical wires and cables, Insulating materials, Crude petroleum, Fibre optic communications, Aerospace fluid systems and components, Telecommunications in general, Thermodynamics and temperature measurements, Lubricants, industrial oils and related products, Measurement of fluid flow, Coals, Testing of metals, Electrical engineering in general, Rubber, Solar energy engineering, Mechanical testing, Reinforced plastics, Measurement of force, weight and pressure, Wood, sawlogs and sawn timber, Wood-based panels, Surface treatment and coating, Products of the textile industry, Sports equipment and facilities, Equipment for entertainment, Information technology (IT) in general, Medical equipment, Environmental testing, Construction industry, Glass, Information sciences. Publishing.

Institute of Electrical and Electronics Engineers (IEEE), multiple internal standard method

IEEE 675-1982 Standard Multiple Controllers in a CAMAC Crate
ST 377-41:2023 ST 377-41:2023 - SMPTE Standard - MXF Multichannel Audio Controlled Vocabulary: Content Property Values
IEEE Unapproved Draft Std P802.1ak-2007/Cor 1_D3.0 IEEE Draft Standard for Local and Metropolitan Area Networks--Virtual Bridged Local Area Networks--Amendment 07: Multiple Registration Protocol-Corrigendum 1: Corrections to the Multiple Registration Protocol (Corrigendum to IEEE 802.1 ak-2007)
IEEE Unapproved Draft Std P802.1ak-2007/Cor 1_D3.0,May 2008 IEEE Draft Standard for Local and Metropolitan Area Networks--Virtual Bridged Local Area Networks--Amendment 07: Multiple Registration Protocol-Corrigendum 1: Corrections to the Multiple Registration Protocol (Corrigendum to IEEE 802.1 ak-2007)
Std 802.1ak-2007 IEEE Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment 07: Multiple Registration Protocol
IEEE Std 802.1ak-2007 IEEE Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment 07: Multiple Registration Protocol

International Telecommunication Union (ITU), multiple internal standard method

ITU-T H.460.16 FRENCH-2005 Multiple message release sequence capability within H.323 Systems
ITU-T H.460.16 SPANISH-2005 Multiple message release sequence capability within H.323 Systems
ITU-R INFORME BS.945-2 SPANISH-1990 METHODS FOR THE ASSESSMENT OF MULTIPLE INTERFERENCE
ITU-R RAPPORT BS.945-2 FRENCH-1990 Methods for the assessment of multiple interference
ITU-T H.610-2003 Full service VDSL System architecture and customer premises equipment SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS Broadband and triple-play multimedia services Broadband multimedia services over VDSL Study Group 16
ITU-T G.8201-2003 Error performance parameters and objectives for multi-operator international paths within the Optical Transport Network (OTN) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital networks ?Quality and availability targets Study

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, multiple internal standard method

REPORT BS.945-2-1990 Methods for the assessment of multiple interference

Professional Standard - Commodity Inspection, multiple internal standard method

SN/T 1586.3-2011 Identification of Phaseolus vulgaris by multiple PCR
SN/T 4005-2013 Test methods for testing the burning behaviour of resilient filling materials used in furniture.Loss in mass
SN/T 3398-2012 Detection for quarantine viruses on soybean by multiple-real time RT-PCR
SN/T 3580-2013 Multiplex real-time fluorescent PCR detection method for four dangerous soybean fungi
SN/T 4035-2014 Methods of measuring rolling resistance of passenger car, truck and bus tyres for import and export.Multi-point test method
SN/T 0184.2-2006 Detection of Listeria monocytogenes in foods.Part 2:Multi-PCR method
SN/T 3393-2012 Rapid simultaneous screen method of five bio-terrorism bacteria at frontier port.Gene suspension array with multiple primers on genus level
SN/T 2206.11-2014 Determination of microorganism in cosmetics.Part 11: Multiplex fluorescent real-time PCR method for Staphylococcus aureus
SN/T 3953-2014 Detection of rotavirus (group A),norovirus and astrovirus by multiple RT-PCR at frontier port

Consumer Electronics Association （U.S.), multiple internal standard method

CEA-2030-2005 Multi Room Audio Cabling Standard

Professional Standard - Agriculture, multiple internal standard method

99兽药质量标准汇编(2006至2011年)-2012 Domestic veterinary drug standard doramectin
153兽药质量标准汇编(2006至2011年)-2012 Domestic Veterinary Drug Standard Astragalus Polysaccharide Powder
100兽药质量标准汇编(2006至2011年)-2012 Domestic Veterinary Drug Standard Doramectin Injection
137兽药质量标准汇编(2006至2011年)-2012 Domestic Veterinary Drug Standard Astragalus Polysaccharide Oral Liquid
164兽药质量标准汇编(2006至2011年)-2012 Domestic Veterinary Drug Standard Domperidone Injection
223兽药质量标准汇编(2006至2011年)-2012 Domestic veterinary drug standard recombinant lysostaphin powder
243药典三部-2010 Appendix Ⅹ XB In vivo biological activity assay of recombinant human erythropoin
285药典四部-2015 3500 Biological activity-potency assay 3522 Recombinant human erythropoin in vivo biological activity assay
280药典四部-2020 3500 Biological activity-potency assay 3522 Recombinant human erythropoin in vivo biological activity assay
820兽药质量标准2017年版 Biological Products Volume 1 Veterinary Drug Quality Standard Foot-and-Mouth Disease Virus Multiplex RT-PCR Detection Kit
304药典三部-2015 Biological Activity - Potency Assay 3522 General Rules for In vivo Biological Activity Assay of Recombinant Human Erythropoin 132

Jilin Provincial Standard of the People's Republic of China, multiple internal standard method

DB22/T 1676-2012 Determination of various pathogenic bacteria in frozen and fresh squid by multiplex PCR method
DB22/T 2566-2016 Multiple PCR method for detection of Haemophilus influenzae type b nucleic acid

American Society of Mechanical Engineers (ASME), multiple internal standard method

ASME SEC II D APPENDIX 7-2001 Appendix 7 Guidelines on Multiple Marking of Materials
ASME SEC II A NMA APP B-2001 Appendix B - Nonmandatory Guidelines on Multiple Marking of Materials
ASME SEC II B NMA APP B-2001 Appendix B - Nonmandatory Guidelines on Multiple Marking of Materials

Group Standards of the People's Republic of China, multiple internal standard method

T/SPMA T/SPMA004-2023 Detection of malaria parasite nucleic acid by multiplex PCR methods
T/CBPIA 0005-2023 Recombinant lysyl endopeptidase quality standard
T/GXAS 489-2023 Establishment of multiplex RT-PCR and multiplex qRT-PCR for differential detection of ASFV, CSFV and APPV
T/CBPIA 0004-2023 Recombinant dual basic amino acid endopeptidase quality standard
T/GXAS 488-2023 Establishment of multiplex RT-PCR and multiplex qRT-PCR for differential detection of senecavirus A and serotype Ο, A, Asia I foot-and-mouth disease virus
T/GDMDMA 0001-2021 Multiple Respiratory Pathogen Nucleic Acids Detection Kit (Fluorometric PCR)
T/CATAGS 4-2019 Excess Baggage TicketSettlement Rules
T/JPMA 003-2019 Multiplex PCR assay for the detection of 11 pathogenic bacteria in bacterial diarrheal diseases
T/CSP 6-2019 Particulate technology-Dispersion stability analysis-Static Multiple Light Scattering
T/CQAE 11016-2021 Calculation Method of Software Quality Index Weight
T/JPMA 016-2022 Detection of pathogenic Vibrio and Plesiomonas shigelloides Multiplex PCR-capillary electrophoresis
T/PVIT 0002-2023 Evaluation indexes and method for video and image recompression
T/CECS 569-2019 Standard for measurement method of indoor air radon

American Society for Testing and Materials (ASTM), multiple internal standard method

ASTM C1500-08(2017) Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
ASTM D4669-18 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
ASTM D4669-98 Standard Test Method for Polyurethane Raw Materials Determination of Specific Gravity of Polyols
ASTM D1995-92(2004) Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D4669-98(2002)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
ASTM D4669-07 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
ASTM D1995-92(2011) Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D4669-07(2013)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
ASTM F1165-15 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM F1165-10 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM D8310-20 Standard Test Method for Analysis of Target Phenols (TPs) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D6021-96(2001)e1 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ASTM D8025-23 Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
ASTM D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ASTM D3142-05 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D2320-98(2003) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D2320-98 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D854-05 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM F1165-98 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM F1165-98(2004) Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM D287-92 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
ASTM D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D287-92(2000)e1 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
ASTM D287-12b(2019) Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
ASTM D287-22 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
ASTM D5550-94 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D5550-00 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM F2918-11 Standard Test Method for Weighing a Bicycle
ASTM D153-84(1996)e1 Standard Test Methods for Specific Gravity of Pigments
ASTM D153-84(2008) Standard Test Methods for Specific Gravity of Pigments
ASTM D153-84(2020) Standard Test Methods for Specific Gravity of Pigments
ASTM D153-84(2014) Standard Test Methods for Specific Gravity of Pigments
ASTM C604-02(2007) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D70-03 Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM C604-02 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-98 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D4892-89(2004) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM C604-02(2007)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D70-97 Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM D287-92(2006) Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
ASTM D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D5443-04(2009)e1 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200176;C by Multi-Dimensional Gas Chromatography
ASTM C373-88(2006) Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products
ASTM C373-14 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, Ceramic Tiles, and Glass Tiles
ASTM C373-16 Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
ASTM D70/D70M-21 Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D5550-14 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D4892-14 Standard Test Method for Density of Solid Pitch 40;Helium Pycnometer Method41;
ASTM D6430-99(2005) Standard Guide for Using the Gravity Method for Subsurface Investigation
ASTM D6430-99 Standard Guide for Using the Gravity Method for Subsurface Investigation
ASTM D1258-05 Standard Test Methods for High-Gravity Glycerin
ASTM F1139-88(2010) Standard Specification for Steam Traps and Drains
ASTM D1258-95(1999) Standard Test Methods for High-Gravity Glycerin
ASTM F2918-11(2015) Standard Test Method for Weighing a Bicycle
ASTM D6430-99(2010) Standard Guide for Using the Gravity Method for Subsurface Investigation
ASTM F2918-11(2023) Standard Test Method for Weighing a Bicycle
ASTM A1061/A1061M-09 Standard Test Methods for Testing Multi-Wire Steel Strand
ASTM D7405-08 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-10 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-08a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-20 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D854-00 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-00e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-02 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D891-95(2004) Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM D891-95(2000) Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM D167-12 Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
ASTM D5550-23 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D891-09 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM D1946-82 Standard Method for Analysis of Reformed Gas by Gas Chromatography
ASTM D1946-77 Standard Method for Analysis Of Reformed Gas By Gas Chromatography
ASTM E252-84(1999) Standard Test Method for Thickness of Thin Foil and Film by Weighing
ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C138/C138M-23 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM D4890-06 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
ASTM D6689-01(2006) Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM D4890-98 Standard Test Methods for Polyurethane Raw Materials Determination of Gardner and APHA Color of Polyols
ASTM D6689-01 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM D5965-02 Standard Test Methods for Specific Gravity of Coating Powders
ASTM D5965-96 Standard Test Methods for Specific Gravity of Coating Powders
ASTM D1429-03 Standard Test Methods for Specific Gravity of Water and Brine
ASTM D5965-02(2013) Standard Test Methods for Specific Gravity of Coating Powders
ASTM D1429-13 Standard Test Methods for Specific Gravity of Water and Brine
ASTM D1429-08 Standard Test Methods for Specific Gravity of Water and Brine
ASTM F1803-97 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ASTM C20-00(2005) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
ASTM C20-00 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
ASTM D646-13 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)
ASTM D1217-93(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM E1235-95e1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E1235-01 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E1235-08 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E1235-12 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM D7405-10a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D3142-97 Standard Test Method for Density of Liquid asphalts (Hydrometer Method)
ASTM E2008-08(2014)e1 Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM F205-94(2015) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM D8024-23 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D8024-16 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D3377-04(2018) Standard Test Method for Weight Loss of Solventless Varnishes
ASTM E1181-02(2008) Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02(2008)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM D5965-02(2007) Standard Test Methods for Specific Gravity of Coating Powders
ASTM D1298-99e1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1217-93(1998) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D4892-89(1999)e1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2008-17(2021) Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D4892-14(2019)e1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM F794-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM F794-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM D1480-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D646-96(2007) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D646-96(2001) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D646-96 Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM C604-18 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D8018-15(2020) Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM C329-88(1999) Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
ASTM D5355-95(2006) Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM D291-86(2002) Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM D5355-95(2001) Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM D5355-95 Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM C97-02 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM C97/C97M-18 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM E1181-02(2023) Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM D5355-95(2017) Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM D5355-95(2021) Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM D5355-95(2012) Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM C97/C97M-15 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM D2337-01(2005) Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
ASTM D2337-01(2010) Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
ASTM D2337-84(1996)e1 Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
ASTM E2539-14(2017) Standard Test Method for Multiangle Color Measurement of Interference Pigments
ASTM E1868-97 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E2008-07 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D5236-18 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
ASTM D7582-10e1 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM E1641-07 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1131-20 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM D6370-99(2003) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM D5236-17 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
ASTM D5236-18a Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
ASTM E2008-08 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E1868-09 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-10(2015) Standard Test Methods for Loss-On-Drying by Thermogravimetry
ASTM F1803-15 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter&x2009;
ASTM F1803-15(2019) Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ASTM C138/C138M-01a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-07 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-08 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-09 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-16a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-10 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-17a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C604-18(2023) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C20-00(2015) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
ASTM D7157-12 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
ASTM D6671-01 Standards Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D2395-93(1997)e1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D2395-06 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D3377-00 Standard Test Method for Weight Loss of Solventless Varnishes
ASTM D3377-96 Standard Test Method for Weight Loss of Solventless Varnishes
ASTM D2395-07 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D2395-07a Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM D3377-04 Standard Test Method for Weight Loss of Solventless Varnishes
ASTM D2395-93(1997)e2 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D2756-02 Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM D3776-09 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D2756-85(1998) Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM D2395-02 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM E436-03(2008) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM D291-86(1994)e1 Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM F2128-13(2021) Standard Test Method for Treestand Repetitive Loading Capability
ASTM D3776/D3776M-20 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM D291-07(2012) Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM F1934-98(2018) Standard Test Method for Weighing a Backpacking or Mountaineering Tent
ASTM F2128-22 Standard Test Method for Treestand Repetitive Loading Capability
ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM D2756-07(2017) Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM D2395-17(2022) Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D291-07 Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM D291-07e1 Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM D2395-07ae1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D3377-04(2013) Standard Test Method for Weight Loss of Solventless Varnishes
ASTM F1992-99 Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes
ASTM F1992-99(2007) Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes
ASTM A1061/A1061M-20a Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
ASTM D2198-84(1996)e1 Standard Test Method for Stain Removal From Multicolor Lacquers
ASTM A1061/A1061M-20 Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
ASTM A1061/A1061M-20ae1 Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
ASTM D2198-02 Standard Test Method for Stain Removal From Multicolor Lacquers
ASTM C147-86(2010) Standard Test Methods for Internal Pressure Strength of Glass Containers

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, multiple internal standard method

GB/T 35627-2017 Indoor multi-dimensional location information GML
GB/T 34916-2017 Nanotechnologies—Multi-walled carbon nanotubes—Determination of amorphous carbon content by thermogravimetric analysis

IETF - Internet Engineering Task Force, multiple internal standard method

RFC 6826-2013 Multipoint LDP In-Band Signaling for Point-to-Multipoint and Multipoint-to-Multipoint Label Switched Paths
RFC 5752-2010 Multiple Signatures in Cryptographic Message Syntax (CMS)
RFC 4073-2005 Protecting Multiple Contents with the Cryptographic Message Syntax (CMS)
RFC 5462-2009 "Multiprotocol Label Switching (MPLS) Label Stack Entry: ""EXP"" Field Renamed to ""Traffic Class"" Field"
RFC 6445-2011 Multiprotocol Label Switching (MPLS) Traffic Engineering Management Information Base for Fast Reroute
RFC 7246-2014 Multipoint Label Distribution Protocol In-Band Signaling in a Virtual Routing and Forwarding (VRF) Table Context

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, multiple internal standard method

GB/T 19915.5-2005 Protocol of multiplex PCR identification of Streptococus suis type 2
GB/T 21406-2008 Internal combustion engines.Engine weight(mass)declaration
GB/T 1966-1996 Test method for apparent porosity and bulk density of porous ceramic
GB/T 4501-2016 Laboratory test methods for truck and bus tyres capabilities
GB/T 4501-2023 Indoor test method for truck tire performance
GB/T 4501-2008 Laboratory test methods for truck and bus tyres capabilities
GB/T 6730.87-2023 Determination of iron ore total iron and other multi-element content wavelength dispersive X-ray fluorescence spectrometry (cobalt internal standard method)
GB/T 4833.2-2008 Multichannel analyzers.Part2:Test methods as multichannel scalers
GB/T 223.71-1997 Methods for chemical analysis of iron, steel and alloy. The gravimetric method after combustion in the pipe furnace for the determination of carbon content

Taiwan Provincial Standard of the People's Republic of China, multiple internal standard method

CNS 7437-1981 Method of Test for Foots in Raw Linseed Oil (Gravimetric Method)
CNS 13570-3-2000 Method of test for pesticide residues in food-Multi-residue analysis(III)
CNS 13570-1-1999 Method of Test for Pesticide Residues in Foods-Multi-residue Analysis(I)
CNS 13570-2-1999 Method of test for pesticide residuesin foods-Multi-residue analysis (Ⅱ)
CNS 13570.1-1999 Method of Test for Pesticide Residues in Foods-Multi-residue Analysis(I)
CNS 13570.3-2000 Method of test for pesticide residues in food-Multi-residue analysis(III)
CNS 13570.2-1999 Method of test for pesticide residuesin foods-Multi-residue analysis (Ⅱ)
CNS 14683-2002 Method of test for veterinary drug residues in food－Hormone mulit-residue analysis

National Metrological Technical Specifications of the People's Republic of China, multiple internal standard method

JJF 2030-2023

Professional Standard - Labor and Labor Safety, multiple internal standard method

LD 67-1994 Contents and methods of hoisting machinery safety inspection

VE-FONDONORMA, multiple internal standard method

RO-ASRO, multiple internal standard method

STAS SR 13285-1994 Leather and furs Determination of mucopolysacharides Gravimetric method

Professional Standard - Hygiene , multiple internal standard method

WS/T 815-2023 Severe trauma pre-hospital and in-hospital information linkage standards

Professional Standard - Machinery, multiple internal standard method

JB/T 11988-2014 Internal combustion counterbalanced forklift trucks.Energy efficiency test methods

Professional Standard - Railway, multiple internal standard method

TB/T 3082-2003 Testing methods for diesel locomotive crane
TB/T 2964.2-1999 Diesel locomotive diesel filter element efficiency inspection method gravimetric method
TB/T 2769.8-1997 Test method for heavy-duty rail car body interior noise measurement
TB/T 3056.3-2002 Diesel locomotive engine oil filter element primary efficiency test method gravimetric method
TB/T 1145-1975 Solution preparation and calibration method (only for domestic issue)

国家质量监督检验检疫总局, multiple internal standard method

SN/T 4603-2016 Multiplex PCR and multiplex real-time fluorescence PCR method for detection of common pathogenic genes of toxigenic Vibrio parahaemolyticus in exported food and water

Shandong Provincial Standard of the People's Republic of China, multiple internal standard method

DB37/T 3317-2018 Multiplex PCR and Dot Hybridization Detection Method for Chicken Leukemia

Guangxi Provincial Standard of the People's Republic of China, multiple internal standard method

DB45/T 1506-2017 Detection of Mycoplasma bovis by Multiplex Polymerase Chain Reaction
DB45/T 918-2013 Detection of Bovine Cryptosporidium by Multiplex Polymerase Chain Reaction
DB45/T 2353-2021 Multiple reverse transcription polymerase chain reaction method for differential detection of main viral diarrhea in pigs
DB45/T 1340-2016 Detection of H5, H7 and H9 Subtype Avian Influenza Viruses by Multiplex RT-PCR

The American Road & Transportation Builders Association, multiple internal standard method

AASHTO T 295-2013 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
AASHTO T 295-2007 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
AASHTO T 100-2014 Standard Method of Test for Specific Gravity of Soils
AASHTO T 100-2015 Standard Method of Test for Specific Gravity of Soils
AASHTO T 295-2008 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
AASHTO T 121M/T 121-2016 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
AASHTO T 121M/T 121-2011 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
AASHTO T 121M/T 121-2015 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
AASHTO TP 70-2011 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO TP 70-2013 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 350-2014 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 295-2002 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method HM-22; Part IIA; ASTM Designation D 3142-97
AASHTO M 332-2014 Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test
AASHTO M 332-2021 Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test
AASHTO T 84-2010 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
AASHTO T 84-2013 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
AASHTO T 228-2009 Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials
AASHTO T 85-2010 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
AASHTO T 85-2013 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
AASHTO T 85-2014 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
AASHTO T 85-2021 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate

AASHTO - American Association of State Highway and Transportation Officials, multiple internal standard method

T 295-2008 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T 295-2013 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T 295-2007 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T 295-1992 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method (ASTM D3142-84 (R 1989))
T 100-2014 Standard Method of Test for Specific Gravity of Soils
T 100-2006 Standard Method of Test for Specific Gravity of Soils
M 176-2006 Standard Specification for Porous Concrete Pipe (ASTM Designation: C 654-03; Renumbered as M 176M/M 176)
T 295-2002 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method (HM-22; Part IIA; ASTM Designation D 3142-97)
T 227-2002 Standard Method of Test for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
T 350-2014 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2009 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2011 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2012 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2013 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2007 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T100-1993 Standard Method of Test for Specific Gravity of Soils (ASTM D854-83)
M 332-2014 Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test
T 121M/T 121-2012 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2005 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2016 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2011 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2017 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2009 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2015 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 295-1997 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method (Nineteenth Edition; ASTM D3142-84(89); Revised Per Interim Specifications - Tests and Methods - 1999)
T 84-2009 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2000 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2010 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2013 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2008 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 85-2013 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
T 85-2014 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
T 85-2010 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
T 85-2008 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
T 228-2009 Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials
T 228-2006 Standard Method of Test for Specific Gravity of Semi-Solid Bituminous Materials

CZ-CSN, multiple internal standard method

CSN 50 0348-1982 Paper testing methods. Internal tearing resistance (Elmendorf method)
CSN 01 0251-1988 Precision of test methods Determination of repeatability and repro- ducibility for a standard test mcthod by inter-laboratory tests
CSN IEC 830:1994 Test methods for multichannel analyzers as multichannel scalers

American National Standards Institute （ANSI), multiple internal standard method

ANSI/ASTM D4669:1998 Polyurethane Raw Materials, Determination of Specific Gravity of Polyols, Method for Testing (08.03)
ANSI/BOMA Z65.4-2010 Multi-Unit Residential Buildings: Standard Methods of Measurement
ANSI/BOMA Z65.1-1996 Method for Measuring Floor Area in Office Buildings
BS ISO 4358:2023 Test methods for civil multi-copter unmanned aircraft system (British Standard)

European Telecommunications Standards Institute (ETSI), multiple internal standard method

ETSI ETR 070-1993 Human Factors (HF); the Multiple Index Approach (MIA) for the Evaluation of Pictograms

Professional Standard - Post and Telecommunication, multiple internal standard method

YDN 077-1997 China Public Multimedia Communication Network Technical System (Internal Standard)
YD/T 1810-2008 Testing Methods for SDH-Based MSTP Embedded With MPLS
YDN 075-1998 China Public Multimedia Communication Network Network Management Specifications (Internal Standard)
YDN 106-1998 Technical requirements for ATM-based multimedia broadband backbone network (internal standard)
YD/T 1474-2006 Technical requirements of multi-sesvice transport platform (MSTP) based on SDH.Embedded with MPLS function
YD/T 1391.1-2005 MultiProtocol Label Switching (MPLS) Testing methods

CU-NC, multiple internal standard method

NC 48-54-1988 Hydrology. Exploitation Hydrometry in.Internal Systems. Determination of Flows. Riverbed Method
NC 48-56-1988 Hydrology. Exploitation Hydrometry in Internal Systems Determination of Flows Gaugihg Method
NC 48-57-1988 Hydrology. Exploitation Hydrology in Internal Systems Determination of Flows Hydrometric Regulating Work Methods
NC 48-47-1988 Hydraulics. Internal Systems Exploitation Hydrometry Terms and Definitions
NC 48-50-1988 Hydraulics and Hydrology. Internal Systems Exploitation Hydrometry. Determination of Water Loss. Measurement Method

Society of Automotive Engineers (SAE), multiple internal standard method

SAE J860-2009 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE HS-4200-1999 Crane Standards Manual IMAGES ARE NOT INCLUDED; PLEASE REFER TO GLOBAL
SAE AS1895/13C-1996 Flange End, Female, Type I, Standard Profile, Design Standard
SAE AS1895/13C-2007 FLANGE END, FEMALE, TYPE I STANDARD PROFILE DESIGN STANDARD
SAE AS1895/13B-1992 FLANGE END, FEMALE, TYPE I STANDARD PROFILE DESIGN STANDARD
SAE AS1895/11C-2013 FLANGE, FEMALE, BUTT WELD, TYPE I STANDARD PROFILE
SAE AS1895/11-1985 FLANGE, FEMALE, BUTT WELD, TYPE I (STANDARD PROFILE)
SAE AS1895/11A-1988 FLANGE, FEMALE, BUTT WELD, TYPE I (STANDARD PROFILE)
SAE AS1895/3B-1992 FLANGE, FEMALE, SEAM WELD, TYPE I STANDARD PROFILE
SAE AS1895/11B-1992 FLANGE, FEMALE, BUTT WELD, TYPE I STANDARD PROFILE
SAE AS1895/3C-2013 FLANGE, FEMALE, SEAM WELD TYPE I STANDARD PROFILE
SAE AS1895/3D-2021 FLANGE, FEMALE, SEAM WELD TYPE I STANDARD PROFILE
SAE AS1895/13A-1985 FLANGE END, FEMALE, TYPE 1 (STANDARD PROFILE) DESIGN STANDARD
SAE AS1895/13-1985 FLANGE END, FEMALE, TYPE 1 (STANDARD PROFILE) DESIGN STANDARD
SAE AS1895/3-1985 FLANGE, FEMALE, SEAM WELD, TYPE 1 (STANDARD PROFILE)
SAE AS1895/3A-1988 FLANGE, FEMALE, SEAM WELD, TYPE 1 (STANDARD PROFILE)
SAE AS1895/15D-1996 Flange End, Female, Type II, Low Profile Design Standard
SAE AS1895/15-1985 FLANGE END, FEMALE, TYPE II (LOW PROFILE) DESIGN STANDARD
SAE AS1895/15C-1994 FLANGE END, FEMALE, TYPE II LOW PROFILE DESIGN STANDARD
SAE AS1895/15B-1992 FLANGE END, FEMALE, TYPE II LOW PROFILE DESIGN STANDARD
SAE AS1895/15D-2007 FLANGE END, FEMALE, TYPE II LOW PROFILE DESIGN STANDARD
SAE AS1895/15A-1988 FLANGE END, FEMALE, TYPE II (LOW PROFILE) DESIGN STANDARD

SAE - SAE International, multiple internal standard method

SAE J860-1996 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860-2015 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860-1985 Test Method for Measuring Weight of Organic Trim Materials
SAE J860-2022 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE AS1895/3C-1996 Flange@ Female@ Seam Weld@ Type I Standard Profile

Guangdong Provincial Standard of the People's Republic of China, multiple internal standard method

DB44/T 1897-2016 Rapid assessment method for major defects of LED indoor lighting products
DB44/T 1610-2015 Test method for airtight performance of car/light truck tubeless tire (static)

Korean Agency for Technology and Standards (KATS), multiple internal standard method

KS F 2494-2007 Standard test method of the laboratory permeability test for
KS F 2394-2014 Standard test method for permeability of porous pavement
KS B 7309-2018 Test method of communication performance for the indoor mobile robot — Part 2: Multi-RAT communication enviornment
KS F 2353-2010(2022) Standard test method for specific bulk gravity of compacted asphalt mixtures
KS F 2353-1985 Standard test method for specific bulk gravity of compacted asphalt mixtures
KS F 2394-2019 Standard test method for permeability of porous pavement

RU-GOST R, multiple internal standard method

GOST 19570-1974 Autoclave cellular concrete panels for internal walls, partitions and floors of house and civil buildings. Technical requirements
GOST 33010-2014 Gas-fired insets for heating more than one room. Requirements and test methods
GOST 12730.4-1978 Concretes. Methods of determination of porosity parameters
GOST 30744-2001 Cements. Methods of testing with using polyfraction standard sand
GOST 1451-1977 Hoisting cranes. Wind load. Norms and methods of determination

GOSTR, multiple internal standard method

GOST 19570-2018 Panels of autoclaved cellular concrete for interior load-bearing walls, partitions and ceilings of residential and public buildings. General specifications
GOST 12730.4-2020 Concretes. Methods of determination of porosity parameters

国家市场监督管理总局、中国国家标准化管理委员会, multiple internal standard method

GB/T 38431-2019 Particulate—Dispersion stability analysis─Static multiple light scattering
GB/T 38949-2020 Determination of pore size for porous membranes—Standard particle method
GB/T 39270-2020 Voltage dip indices and severity assessment method

Shanghai Provincial Standard of the People's Republic of China, multiple internal standard method

DB31/T 431-2009 Multiplex RT-PCR Detection Method of Swine Influenza Virus HA1/HA3, NA1/NA2 Subtypes

PL-PKN, multiple internal standard method

PN C45300-04-1986 Aromatic hydrocarbons Test methods Determination of colour intensity in test with sulphoric acid using bichromate colour standards

Association Francaise de Normalisation, multiple internal standard method

NF ISO 5005:2009 Engins de terrassement - Méthode de repérage du centre de gravité
XP CEN/TS 17174:2018 Aliments des animaux : Méthodes d'échantillonnage et d'analyse - Critères de performance pour les méthodes d'analyse validées par un ou plusieurs laboratoires pour le dosage des métaux lourds
NF X32-102:2023 Biodiversité et génie écologique - Démarche de conduite d'un état initial de la biodiversité dans le cadre d'un projet
NF X11-682:1984
NF X11-683:1981

ZA-SANS, multiple internal standard method

SANS 315:2005 Milk - Determination of fat content - Gravimetric method (Reference method)
ARP 015-1998 Methodology for the development of standards
SANS 318:2005 Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method)
SANS 829:2009 Performance standards in building - Contents and presentation

(U.S.) Ford Automotive Standards, multiple internal standard method

FORD ESR-M99J278-A-2005 PAINT, INTERIOR TRIM, RECOLOR ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Nuclear Industry, multiple internal standard method

EJ/T 577-1991 Test method when multi-channel analyzer is used as multi-channel scaler

British Standards Institution (BSI), multiple internal standard method

BS EN 13090:2000 Means for resealing threaded joints of gas pipework in buildings
PD ISO/TS 23690:2023 Nanotechnologies. Multiwall carbon nanotubes. Determination of carbon impurity content by thermogravimetric analysis
BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
BS EN ISO 21253-2:2019 Water quality. Multi-compound class methods - Criteria for the quantitative determination of organic substances using a multi-compound class analytical method

TR-TSE, multiple internal standard method

TS 116-1964 STANDARD METHODS OF THE TEST FOR SPECIFIC GRAV1TY OF CREOSOTE

IT-UNI, multiple internal standard method

UNI 3518-1954

API - American Petroleum Institute, multiple internal standard method

API STD 2547-1972 Standard Method Of Test for Density@ Specific Gravity or API Gravity Of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
API STD 2547-1970 Standard Method Of Test for Density@ Specific Gravity or API Gravity Of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

Danish Standards Foundation, multiple internal standard method

DS/ISO 8450:1992 Pipework. Single overlap flexible metal hoses (unpacked, no tightness, circular or polygonal section, in protected carbon steel)
DS/ISO 8448:1992 Pipework. Double overlap flexible metal hoses (unpacked, limited tightness, circular or polygonal section, in protected carbon steel)
DS/ISO 8447:1992 Pipework. Single overlap flexible metal hoses (rubber packing, limited tightness, circular or polygonal section, in protected carbon steel)
DS/EN 301213-5 V1.1.1:2002 Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods; Part 5: Multi-Carrier Time Division Multiple Access (MC-TDMA) methods
DS/EN 301213-2 V1.3.1:2003 Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods; Part 2: Frequency Division Multiple Access (FDMA) methods
DS/EN 301213-3 V1.1.2:2003 Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods; Part 3: Time Division Multiple Access (TDMA) methods

International Electrotechnical Commission (IEC), multiple internal standard method

IEC 60830:1987 Test methods for multichannel analyzers as multichannel scalers.

交通运输部, multiple internal standard method

JT/T 1322-2020 Detection method of energy utilization efficiency of port internal combustion engine driven cranes

National Association of Corrosion Engineers (NACE), multiple internal standard method

NACE SP0116-2016 Multiphase Flow Internal Corrosion Direct Assessment (MP-ICDA) Methodology for Pipelines (Item No. 21402)

Underwriters Laboratories (UL), multiple internal standard method

UL 219-2013 UL Standard for Safety Lined Fire Hose for Interior Standpipes (Fourth Edition; Reprint with Revisions Through and Including December 11@ 2018)
UL 1777-2015 UL Standard for Safety Chimney Liners (Fifth Edition; Reprint with Revisions Through and Including April 11@ 2019)
UL 539-2009 UL Standard for Safety Single and Multiple Station Heat Alarms (Sixth Edition; Reprint with revisions through and including December 23@ 2014)

Professional Standard - Non-ferrous Metal, multiple internal standard method

YS/T 118.2-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (multi-chamber roasting furnace)

International Organization for Standardization (ISO), multiple internal standard method

ISO/TS 23690:2023 Nanotechnologies — Multiwall carbon nanotubes — Determination of carbon impurity content by thermogravimetric analysis
ISO/TR 24578:2012 Hydrometry - Acoustic Doppler profiler - Method and application for measurement of flow in open channels
ISO 15769:2010 Hydrometry - Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods

海关总署, multiple internal standard method

SN/T 5225-2019 Multiplex PCR method for rapid detection of five diarrheagenic Escherichia coli in imported and exported foods

Professional Standard - Medicine, multiple internal standard method

YY/T 0511-2009 Test method for evaluation of the biodegradation and osteogenesis of porous bioceramic in vivo

German Institute for Standardization, multiple internal standard method

DIN EN 302-8:2017 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear; German version EN 302-8:2017
DIN EN 301213-5:2002-11 Fixed Radio Systems - Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods - Part 5: Multi-Carrier Time Division Multiple Access (MC-TDMA) methods ...

Standard Association of Australia （SAA）, multiple internal standard method

AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method

Military Standard of the People's Republic of China-General Armament Department, multiple internal standard method

GJB 7901-2012 Calibration method of space tracking, telemetering and command ship at dock
GJB 8276-2015 Calibration method of dual polarization Doppler weather radar
GJB 9352-2018 Internal calibration method of spaceborne synthetic aperture radar

ANSI - American National Standards Institute, multiple internal standard method

X9.65-2004 Triple Data Encryption Algorithm (TDEA)@ Implementation Standard

CY-CYS, multiple internal standard method

CYS 139-1984 CYPRUS STANDARD BUILDING CONSTRUCTION - MODULAR COORDINAON -MULTMODULES FOR HORIZOJTAL COORDINATING DIMENSIONS

Professional Standard - Electron, multiple internal standard method

SJ 1886-1981 Marking content and method of thermistors

Xinjiang Provincial Standard of the People's Republic of China, multiple internal standard method

DB65/T 3971-2017 Simultaneous Determination of Multiple Heavy Metals in Vegetables and Fruits by Plasma Mass Spectrometry

BE-NBN, multiple internal standard method

NBN X 03-009-1988 Precision of tests methods - Détermination of repeatabi1ity and reproductibi1ity for a standard test method by inter-laboratory tests

IX-FAO, multiple internal standard method

CODEX STAN 36-1981(En) International Codex Alimentarius standards for quick-frozen gutted and non-veined fish
CODEX STAN 36-1981,Rev.1-1995(Ch) International Codex Alimentarius standards for quick-frozen gutted and non-veined fish
CODEX STAN 181-1991(En) International Codex Alimentarius Standards for Weight Control Formulas
CODEX STAN 181-1991(Ch) International Codex Alimentarius Standards for Weight Control Formulas

European Committee for Standardization (CEN), multiple internal standard method

EN 13798:2002 Hydrometry - Specification for a reference raingauge pit

Sichuan Provincial Standard of the People's Republic of China, multiple internal standard method

DB51/T 2628-2019 Specifications for exterior and interior signs of judicial offices

Lithuanian Standards Office , multiple internal standard method

LST EN 301 213-5 V1.1.1-2007 Fixed Radio Systems;Point-to-multipoint equipment;Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods;Part 5: Multi-Carrier Time Division Multiple Access (MC-TDMA) methods
LST EN 301 213-3 V1.2.1-2002 Fixed Radio Systems; Point - to multipoint equipment; Point - to multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 3: Time Divisison Multiple Access (TDMA) methods
LST EN 301 213-2 V1.1.1-2002 Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods; Part 2: Frequency Division Multiple Access (FDMA) methods
LST EN 301 213-3 V1.4.1-2007 Fixed Radio Systems;Point-to-multipoint equipment;Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods;Part 3: Time Division Multiple Access (TDMA) methods
LST EN 301 213-3 V1.3.1-2007 Fixed Radio Systems;Point-to-multipoint equipment;Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods;Part 3: Time Division Multiple Access (TDMA) methods
LST EN 301 213-3 V1.1.1-2007 Fixed Radio Systems;Point-to-multipoint equipment;Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods;Part 3: Time Division Multiple Access (TDMA) methods
LST EN 301 213-2 V1.3.1-2007 Fixed Radio Systems;Point-to-multipoint equipment;Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods;Part 2: Frequency Division Multiple Access (FDMA) methods
LST EN 301 213-2 V1.2.1-2007 Fixed Radio Systems;Point-to-multipoint equipment;Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods;Part 2: Frequency Division Multiple Access (FDMA) methods

ETSI - European Telecommunications Standards Institute, multiple internal standard method

ETSI EN 301 213-5:2001 Fixed Radio Systems; Point-to-Multipoint Equipment; Point-to-Multipoint Digital Radio Systems in Frequency Bands in the Range 24@25 GHz to 29@5 GHz Using Different Access Methods; Part 5: Multi-Carrier Time Division Multiple Access (MC-TDMA) Methods (V1.1

Professional Standard - Petrochemical Industry, multiple internal standard method

SH/T 0703-2001 Standard test method for measuring apparent viscosity at high-temperature and high-shear rate by multicell capillary viscometer

Professional Standard - Environmental Protection, multiple internal standard method

HJ 618-2011 Determination of atmospheric articles PM and PM in ambient air by gravimetric method

Japanese Industrial Standards Committee (JISC), multiple internal standard method

JIS A 1161:1994 Testing methods for bulk specific gravity, water content, absorption and compressive strength of cellular concrete
JIS C 8943:2009 Indoor measuring method of output power for multi-junction solar cells and modules (Component reference cell method)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., multiple internal standard method

ASHRAE LV-11-C053-2011 Development of an Experimental Methodology to Determine Monolayer and Multilayer Particle Resuspension from Indoor Surfaces

Professional Standard - Urban Construction, multiple internal standard method

CJ 26.7-1991 Water quality inspection method of urban sewage - Determination gravimetric method of standard oil

Professional Standard - Electricity, multiple internal standard method

DL/T 2218-2021 Quantitative detection method of corrosive sulfur dibenzyl disulfide in insulating oil by gas chromatography multiplex mass spectrometry

Fujian Provincial Standard of the People's Republic of China, multiple internal standard method

DB35/T 1555-2016 Multiplex RT-PCR Detection Method of Narcissus Yellow Streak Virus, Narcissus Mosaic Virus and Narcissus Latent Virus

KR-KS, multiple internal standard method

KS B 7309-2023 Test method of communication performance for the indoor mobile robot — Part 2: Multi-RAT communication environment

Indonesia Standards, multiple internal standard method

SNI 19-6463-2000 Method for calibration of bourdon manometers by dead weight tester

HU-MSZT, multiple internal standard method

MSZ 10067-1960

Professional Standard - Press and Publication, multiple internal standard method

CY/T 81-2012 Principles and Methods of Publishing Content Resource Identification