ZH

RU

ES

bathroom

bathroom, Total:199 items.

In the international standard classification, bathroom involves: Installations in buildings, Furniture, Products of the textile industry, Reinforced plastics, Materials for aerospace construction, Protection of and in buildings, Burners. Boilers, Domestic, commercial and industrial heating appliances, Ventilators. Fans. Air-conditioners, Aids for disabled or handicapped persons, Electrical equipment for working in special conditions, Footwear, Home economics in general, Rubber and plastics products, Solar energy engineering, Environmental protection, Hospital equipment, Wastes, Plastics, Medical equipment, Domestic electrical appliances in general, Miscellaneous domestic and commercial equipment, Flexible drives and transmissions, Thermodynamics and temperature measurements, Equipment for children, Lifting equipment, Textile machinery, Shipbuilding and marine structures in general, Radiation protection, Sports equipment and facilities, Buildings, Body care equipment, Ground service and maintenance equipment, Measurement of force, weight and pressure, Valves, Optical equipment.


Taiwan Provincial Standard of the People's Republic of China, bathroom

Standard Association of Australia (SAA), bathroom

Anhui Provincial Standard of the People's Republic of China, bathroom

Group Standards of the People's Republic of China, bathroom

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, bathroom

Military Standards (MIL-STD), bathroom

Association Francaise de Normalisation, bathroom

  • NF D11-128:2006 Baths for domestic purpose.
  • NF D12-208:2012 Sanitary appliances - Built-in frames.
  • NF EN IEC 63044-5-2:2019 Systèmes Electroniques pour les Foyers Domestiques et les Bâtiments (HBES) et Systèmes de Gestion Technique du Bâtiment (SGTB) - Partie 5-2 : exigences CEM relatives aux HBES/SGTB destinés à être utilisés dans des environnements résidentiels, ...
  • NF EN IEC 63044-4:2021 Systèmes électroniques pour les foyers domestiques et les bâtiments (HBED) et systèmes de gestion technique du bâtiment (SGTB) - Partie 4 : exigences générales de sécurité fonctionnelle pour les produits destinés à être intégrés dans les ...
  • NF EN 14240:2004 Ventilation des bâtiments - Plafonds refroidis - Essais et évaluation
  • NF S54-042:2006 Thermometers for bath - Temperature indicators - Specifications and marks.
  • NF EN 12792:2003 Ventilation des bâtiments - Symboles, terminologie et symboles graphiques
  • NF EN IEC 63044-6:2021 Systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) et systèmes de gestion technique du bâtiment (SGTB) - Partie 6 : exigences de planification et d'installation
  • NF EN 12236:2002 Ventilation des bâtiments - Supports et appuis pour réseau de conduits - Prescriptions de resistance
  • NF EN 1505:1998 Ventilation des bâtiments - Conduits en tôle et accessoires à section rectangulaire - Dimensions.
  • FD CEN/TR 14788:2006 Ventilation des bâtiments - Conception et dimensionnement des systèmes de ventilation résidentiels
  • XP CEN/TS 17153:2018 Ventilation des bâtiments - Correction du débit d'air en fonction des conditions ambiantes
  • NF EN 13030:2002 Ventilation des bâtiments - Bouches d'air - Essai de performance des grilles d'air extérieur soumises à une pluie simulée
  • NF EN ISO 12241:2022 Isolation thermique des équipements de bâtiments et des installations industrielles - Méthodes de calcul
  • NF EN 14134:2019 Ventilation des bâtiments - Mesure de la performance et vérifications des systèmes de ventilation résidentiels
  • NF E51-776-1:2018 Ventilation des bâtiments - Appareils de régulation de débit d'air en conduits - Partie 1 : essais
  • NF EN ISO 21003-1:2008 Systèmes de canalisations multicouches pour installations d'eau chaude et froide à l'intérieur des bâtiments - Partie 1 : généralités
  • NF EN 12237:2003 Ventilation des bâtiments - Réseau de conduits - Résistance et étanchéité des conduits circulaires en tôle
  • NF EN 13403:2003 Ventilation des bâtiments - Conduits non métalliques - Réseau de conduits en panneaux isolants de conduits
  • NF EN 13180:2002 Ventilation des bâtiments - Réseau de conduits - Dimensions et prescriptions mécaniques pour les conduits flexibles
  • NF EN 12238:2001 Ventilation des bâtiments - Bouches d'air - Essais aérodynamiques et caractérisation pour applications en diffusion à mélange
  • NF EN 16445:2013 Ventilation des bâtiments - Bouches d'air - Essais aérodynamiques et étalonnage pour applications de fluides mixtes pour les essais non-isothermes pour jet froid
  • NF ISO 18651-1:2011 Machines et matériels pour la construction des bâtiments - Vibrateurs internes pour béton - Partie 1 : terminologie et spécifications commerciales

IL-SII, bathroom

国家市场监督管理总局、中国国家标准化管理委员会, bathroom

German Institute for Standardization, bathroom

  • DIN EN 14516/A1:2017 Baths for domestic purposes; German and English version EN 14516:2015/prA1:2017
  • DIN EN 14516:2019-05 Baths for domestic purposes; German version EN 14516:2015+A1:2018
  • DIN EN 232:2013-01 Baths - Connecting dimensions; German version EN 232:2012
  • DIN 23323:2007 Bathing sandals for miners
  • DIN 23323:1985 Bathing sandals for mining
  • DIN EN 14516:2019 Baths for domestic purposes (includes Amendment :2018)
  • DIN 68935:1999 Coordinating dimensions for bathroom furniture, appliances and sanitary equipment
  • DIN 20180:2010 Pulley for clothes hoists in pithead baths
  • DIN 20180:1991 Pulley for clothes hoists in pithead baths
  • DIN 81303:2003 Mortise-locks for hinged doors of lavatory and bath on ships
  • DIN 18022:1989 Domestic kitchens, bathrooms and WCs; design principles
  • DIN 5050-1:1992 Solariums and domestic sun lamps; measuring, marking, classification
  • DIN 68935:2009 Coordinating dimensions for bathroom furniture, appliances and sanitary equipment
  • DIN 68935:2009-10 Coordinating dimensions for bathroom furniture, appliances and sanitary equipment
  • DIN 18017-3:1990 Ventilation of bathrooms and WCs without outside windows by fans
  • DIN 81309:2003-08 Rim-locks with latch-bolt for hinged doors of lavatory and bath on ships
  • DIN 81309:2003 Rim-locks with latch-bolt for hinged doors of lavatory and bath on ships
  • DIN 19643-1:2023-06 Treatment of water of swimming pools and baths - Part 1: General requirements / Note: This standard is part of the DVGW body of rules.
  • DIN 5050-1:2010 Solariums and domestic sun lamps - Part 1: Measuring and marking
  • DIN 18017-3:2009 Ventilation of bathrooms and WCs without outside windows - Part 3: Ventilation by fans
  • DIN 19643-4:2023-06 Treatment of water of swimming pools and baths - Part 4: Combinations of process with ultrafiltration / Note: This standard is part of the DVGW body of rules.
  • DIN 20182:2010 Double loop chain for hoisting clothes in pithead baths - Not tested, non-calibrated
  • DIN 19645:2016-07 Treatment of spent filter backwash water from systems for treatment of water of swimming-pools and baths / Note: This standard is part of the DVGW body of rules.
  • DIN 18017-1:1987 Ventilation of bathrooms and WCs without outside windows; single shaft systems without ventilators

ES-UNE, bathroom

HU-MSZT, bathroom

NL-NEN, bathroom

  • NEN-EN 232-1993 Baths. Connecting dimensions
  • NEN 3369-1971 Standard methods for measuring performance of plastic buckets, washing bowls and baths
  • NEN-EN 274-1993 Sanitary tapware. Waste fittings for basins, bidets and baths. General technical specifications

IN-BIS, bathroom

Japanese Industrial Standards Committee (JISC), bathroom

Korean Agency for Technology and Standards (KATS), bathroom

United States Navy, bathroom

US-FCR, bathroom

Henan Provincial Standard of the People's Republic of China, bathroom

CZ-CSN, bathroom

ZA-SANS, bathroom

AENOR, bathroom

AR-IRAM, bathroom

US-VA, bathroom

British Standards Institution (BSI), bathroom

  • BS 8445:2012 Bath and shower mats. Testing. Assessment of slip resistance properties
  • BS EN 263:2002 Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
  • BS EN 12312-13:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Lavatory service equipment
  • BS EN 263:2008 Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
  • BS EN 198:2008 Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods

GB-REG, bathroom

KR-KS, bathroom

ES-AENOR, bathroom

Professional Standard - Light Industry, bathroom

中华人民共和国国家卫生和计划生育委员会, bathroom

  • GB 9665-1988 Hygienic Standards for Public Bathrooms (Abolished)

TH-TISI, bathroom

  • TIS 797-2001 Vitreous china sanitary appliances: bathroom accessories

Indonesia Standards, bathroom

SE-SIS, bathroom

  • SIS SS 92 36 12-1989 Wall coverings for bathrooms — Determination of water tightness
  • SIS SS 92 36 14-1989 Wall coverings for bathrooms — Determination of cleanability
  • SIS SS 92 36 13-1989 Wall coverings for bathrooms — Determination of resistance to mould
  • SIS SS 92 36 01-1989 Wall coverings for bathrooms in dwellings — Functional requirements
  • SIS SS 92 36 21-1989 Floor and wall surfaces in bathrooms — Determination of water tightness
  • SIS SS 92 36 15-1989 Wall coverings for bathrooms — Determination of water tightness in case of movements in the wall structure — Tension load
  • SIS SS 92 36 16-1989 Wall coverings for bathrooms — Determination of water tightness in case of movements in the wall structure — Shear load

Professional Standard - Recommended Standards for Engineering Construction, bathroom

  • CECS 108-2000 Specification for design of water supply and drainge in public bathroom

RO-ASRO, bathroom

  • STAS 3581/2-1989 Solid fuel burning appliances STOVES FOR BATH OVENS
  • STAS 3581/1-1982 Solid fuel burning appliances STOVE-GEYSER FOR BATHROOM Performance chavacteristics

American Society of Mechanical Engineers (ASME), bathroom

AT-ON, bathroom

American Society for Testing and Materials (ASTM), bathroom

  • ASTM F1967-01 Standard Consumer Safety Specification for Infant Bath Seats
  • ASTM F1967-99 Standard Consumer Safety Specification for Infant Bath Seats
  • ASTM F1967-08 Standard Consumer Safety Specification for Infant Bath Seats
  • ASTM F1967-08a Standard Consumer Safety Specification for Infant Bath Seats
  • ASTM F1967-11 Standard Consumer Safety Specification for Infant Bath Seats
  • ASTM F1967-07 Standard Consumer Safety Specification for Infant Bath Seats
  • ASTM F1967-07a Standard Consumer Safety Specification for Infant Bath Seats
  • ASTM F1967-04 Standard Consumer Safety Specification for Infant Bath Seats
  • ASTM F1967-18 Standard Consumer Safety Specification for Infant Bath Seats
  • ASTM F1967-19 Standard Consumer Safety Specification for Infant Bath Seats
  • ASTM F444-88(1999) Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
  • ASTM F444-88(2017) Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas

Professional Standard - Commodity Inspection, bathroom

  • SN/T 4132-2015 Determination of slip resistance of plastic bath and shower mats.Ramp test

European Committee for Standardization (CEN), bathroom

  • EN 263:2008 Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
  • EN 12312-13:2017 Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment

Canadian Standards Association (CSA), bathroom

  • CSA B79-05-2005 Avaloirs de sol, avaloirs pluviaux, avaloirs de douche et orifices de nettoyage dans la construction r閟identielle troisi鑝e 閐ition

YU-JUS, bathroom

  • JUS U.A9.211-1990 Spatial needs of disabted peopte in buildings and environment. Accessible etements and spaces. athroom etements

Jiangsu Provincial Standard of the People's Republic of China, bathroom

  • DB32/T 3761.13-2020 Part 13 of the Technical Specifications for the Prevention and Control of Novel Coronavirus Pneumonia: Public Bathrooms




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved