ZH
RU
ES

peak area unit

peak area unit, Total:498 items.

In the international standard classification, peak area unit involves: Fibre optic communications, Products of the textile industry, Lubricants, industrial oils and related products, Rubber and plastics products, Measurement of volume, mass, density, viscosity, Textile fibres, Reinforced plastics, Non-textile floor coverings, Road engineering, Water quality, Products of the chemical industry, Leather technology, Materials for the reinforcement of composites, Buildings, Construction materials, Particle size analysis. Sieving, Surface treatment and coating, Metrology and measurement in general, Raw materials for rubber and plastics, Farming and forestry, Adhesives, Geology. Meteorology. Hydrology, Materials for aerospace construction, Elements of buildings, Paper and board, Non-ferrous metals, Medical equipment, Photography, Paints and varnishes, Waxes, bituminous materials and other petroleum products, Insulating materials.

American National Standards Institute （ANSI), peak area unit

ANSI/TIA-492CAAB-2000 Detail Specification for Class IVa Dispersion Unshifted Single-Mode Optical Fibers with Low Water Peak
BS EN ISO 9073-1:2023 Nowovens. Test methods Determination of mass per unit area (British Standard)

TIA - Telecommunications Industry Association, peak area unit

TIA/EIA-492CAAB-2000 Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Fibers with Low Water Peak

Standard Association of Australia （SAA）, peak area unit

AS 4878.3:2001 Methods of test for coated fabrics - Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
AS/NZS 2111.9:1996 Textile floor coverings - Tests and measurements - Determination of the number of tufts per unit length and per unit area
AS/NZS 2111.3:1996 Textile floor coverings - Tests and measurements - Determination of mass per unit area
AS 1012.5:1999 Methods of testing concrete - Determination of mass per unit volume of freshly mixed concrete
AS/NZS 4257.3:1994 Plastic roof and wall cladding materials - Methods of test - Determination of mass per unit area of sheet
AS 2001.2.13:1987 Methods of test for textiles - Physical tests - Determination of mass per unit area and mass per unit length of fabrics
AS 2836.3:1998 Methods of testing surgical dressing and surgical dressing materials - Method for the determination of mass per unit area
AS 2331.2.3:2001 Methods of test for metallic and related coatings - Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings

American Society for Testing and Materials (ASTM), peak area unit

ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D3880/D3880M-90(2009)e1 Standard Test Method for Asbestos Strength Units
ASTM D5261-92(2009) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D5261-92(2003) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D3776/D3776M-09ae2 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09a(2013) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09a(2017) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09ae1 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM B137-95(2009) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM D3776/D3776M-09a Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D6475-17 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
ASTM D6242-98(2004) Standard Test Method for Mass Unit Area of Nonwoven Fabrics
ASTM D6242-98 Standard Test Method for Mass Unit Area of Nonwoven Fabrics
ASTM D5261-10 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D5261-92(1996) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D3776-07 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D5261-10(2018) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D6566-12 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D6566-17 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D6566-18 Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM D5848-05 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D899-00(2007) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D6566-00(2006) Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D3776-96(2002) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776-96 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D6566-00 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D899-00 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D898-96 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
ASTM D8122-21 Standard Test Method for Determining Mass per Unit Area of Geohazard Nettings
ASTM D898-05 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
ASTM D6566-18(2023) Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM D5848-20 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D6566-14 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D899-00(2013) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D6475-00 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
ASTM D5848-10e1 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D5848-07 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D5848-10 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D5848-98 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D646-13 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)
ASTM D646-96(2007) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D646-96(2001) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D646-96 Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D5993-18(2022) Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
ASTM D5993-18 Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
ASTM B767-88(2006) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(1994) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(2001) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(2016) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM D6475-06 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
ASTM B767-88(2021) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(2010) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures

CL-INN, peak area unit

INDITECNOR 2.4-11ch-1948

KR-KS, peak area unit

KS M ISO 2286-2-2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
KS K ISO 1763-2022 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
KS K ISO 9073-1-2018 Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area
KS K ISO 9073-1-2018(2023) Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area
KS K ISO 7211-6-2019 Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric

BE-NBN, peak area unit

NBN-EN 430-1994 Resilient floor coverings - Determination of mass per unit area
NBN G 58-005-1973
NBN EN ISO 3892:1995 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:1980)
NBN-EN 29073-1-1992 Textiles. Test methods for nonwovens. Part 1: Determination of mass per unit area (ISO 9073-1:1989)
NBN EN ISO 1460:1995 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992)
NBN I 07-003-1986

British Standards Institution (BSI), peak area unit

BS EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BS EN ISO 2286-2:2016 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BS EN ISO 10352:2020 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
BS 2471:2005 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
19/30336188 DC BS EN ISO 10352. Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
ISO 9073-1:2023 Nowovens. Test methods - Determination of mass per unit area
BS EN ISO 23997:2012 Resilient floor coverings. Determination of mass per unit area
BS ISO 3374:2000 Reinforcement products - Mats and fabrics - Determination of mass per unit area
BS EN 12127:1998 Textiles - Fabrics - Determination of mass per unit area using small samples
BS 2866:1984 Methods for determination of the mass of warp and weft per unit area of fabric
BS EN 984:2002 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings
BS ISO 1763:2020 Textile floor coverings. Determination of number of tufts and/or loops per unit length and per unit area
19/30375464 DC BS ISO 1763. Textile floor coverings. Determination of number of tufts and/or loops per unit length and per unit area
BS EN 718:1996 Resilient floor coverings - Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings
BS EN ISO 3892:2001 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
BS EN 2329:1993 Textile glass fibre preimpregnates - Test method for the determination of mass per unit area
BS EN 984:2001 Textile floor coverings. Determination of the mass per unit area of the use surface of needled floor coverings
BS EN 1849-2:2009 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets
BS EN 1849-2:2010 Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastic and rubber sheets
BS EN ISO 2420:2017 Leather. Physical and mechanical tests. Determination of apparent density and mass per unit area
BS EN ISO 10352:2010 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area
BS EN 1849-1:2000 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Bitumen sheets for roof waterproofing
22/30442768 DC BS EN ISO 9073-1. Nonwovens. Test methods. Part 1. Determination of mass per unit area
BS EN 14196:2003 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
BS EN ISO 2106:2011 Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
BS EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
BS EN ISO 2106:2020 Tracked Changes. Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
BS EN ISO 1460:2020 Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area
19/30355099 DC BS EN ISO 2106. Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
BS EN ISO 1460:1995 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
BS EN 1849-2:2001 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets for roof waterproofing
BS 3424 Pt.3:1982 Testing coated fabrics. Methods 5A, 5B and 5C. Methods for determination of mass per unit area
BS EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
BS EN ISO 10111:2002 Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
BS EN 2331:1993 Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area
BS ISO 7211-6:2020 Tracked Changes. Textiles. Methods for analysis of woven fabrics construction. Determination of the mass of warp and weft per unit area of fabric
20/30404049 DC BS EN ISO 1460. Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area
BS EN 1849-2:2019 Tracked Changes. Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastics and rubber sheets for roof waterproofing

Professional Standard - Textile, peak area unit

FZ/T 20008-2015 Test for the mass per unit area of wool fabric
FZ/T 20008-2006 Test for the mass per unit area of wool fabric
FZ/T 20008-1993 Determination of weight per unit area of woolen fabrics
FZ/T 60003-1991 Determination of mass per unit area of nonwoven fabrics
FZ/T 60003-1993 Determination of mass per unit area of nonwoven fabrics
FZ/T 01033-1993 Determination of the mass per unit area and the amount of pile (cover) of pile fabrics
FZ/T 01033-2012 Test method of mass per unit area and pile percent of pile fabric
FZ/T 01094-2008 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of the mass of warp and weft per unit area of fabric
FZ/T 01094-1999 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of the mass of warp and weft per unit area of fabric

SE-SIS, peak area unit

SIS 83 25 16-1973 Carpets. Determination of mass of pile per unit area
SIS 83 25 11-1973 Carpets. Determination of number of tufts or loops per unit length and per unit area
SIS SS 22 41 45-1984 Textile glass - Woven fabrics - Deter- mination of mass per unit area
SIS 83 25 12-1973 Machine-made textile floor coverings. Determination of mass per unit area
SIS SS 83 25 16-1982 Carpets - Determination of mass of effective pile per unit area that can be shorn away from the substrate
SIS SS-ISO 3892:1983 Conversion coatings on metallic ma- terials - Determination of coating m?ss per unit area - Gravimetric methods
SIS SMS 2951-1971 Determination of the weight per unit area of hot dip galvanized coatings on ferrous materials by chemical dissolution of the coating; gravimetric method

International Organization for Standardization (ISO), peak area unit

ISO 9864:1990 Geotextiles; determination of mass per unit area
ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 1763:2020 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
ISO 1763:1986 Carpets; Determination of number of tufts and/or loopsn per unit length and per unit area
ISO 3801:1977 Textiles; Woven fabrics; Determination of mass per unit length and mass per unit area
ISO 1763:1973 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
ISO 23997:2007 Resilient floor coverings - Determination of mass per unit area
ISO 3374:1980 Textile glass — Glass mats — Determination of mass per unit area
ISO 3374:2000 Reinforcement products - Mats and fabrics - Determination of mass per unit area
ISO 1958:1973 Textile floor coverings — Determination of mass of total pile yarn per unit area
ISO 1764:1975 Textile floor coverings — Determination of mass per unit area of machine made textile floor coverings
ISO 3374:1990 Textile glass mats; determination of mass per unit area
ISO 4605:1978 Textile glass; Woven fabrics; Determination of mass per unit area
ISO/FDIS 9073-1 Nonwovens — Test methods — Part 1: Determination of mass per unit area
ISO 3892:2000 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
ISO 10352:1997 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
ISO 2420:2017 | IULTCS/IUP 5 Leather — Physical and mechanical tests — Determination of apparent density and mass per unit area
ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
ISO 3892:1980 Conversion coatings on metallic materials; Determination of coating mass per unit area; Gravimetric methods
ISO 9073-1:1989 Textiles; test methods for nonwovens; part 1: determination of mass per unit area
ISO 10352:1991 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
ISO 2095:1977 Textile floor coverings — Determination of mass of effective pile per unit area that can be shorn away from the substrate
ISO 2106:1982 Anodizing of aluminium and its alloys; Determination of mass per unit area (surface density) of anodic oxide coatings; Gravimetric method
ISO 10352:2020 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area
ISO 1460:1992 Metallic coatings; hot dip galvanized coatings on ferrous materials; gravimetric determination of the mass per unit area
ISO 2106:1982/Amd 1:1983 Anodizing of aluminium and its alloys; determination of surface density of anodic oxide coatings; gravimetric method; amendment 1
ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
ISO 7211-6:2020 Textiles — Methods for analysis of woven fabrics construction — Part 6: Determination of the mass of warp and weft per unit area of fabric
ISO 10111:2019 Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
ISO 1460:1973 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Determination of the mass per unit area — Gravimetric method
ISO 1460:2020 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Determination of the mass per unit area — Gravimetric method
ISO 7211-6:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 6 : Determination of the mass of warp and weft per unit area of fabric
ISO 10111:2000 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

Association Francaise de Normalisation, peak area unit

NF G37-102-2*NF EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2 : methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
NF EN 14971:2006 Textiles - Étoffes tricotées - Détermination du nombre de mailles par unité de longueur et unité de surface
NF T57-511*NF EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
NF G07-169*NF EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area.
NF G35-004:1987 Carpets. Determination of number of tufts and/or loops per unit length and per unit area.
NF G35-045:1995 DETERMINATION OF THE MASS PER UNIT AREA OF THE USE SURFACE OF NEEDLED FLOOR COVERINGS. (EUROPEAN STANDARD EN 984).
NF G07-169:1994 Textiles. Tests for knitted fabrics. Determination of number of stiches per unit length and unit surface.
NF X11-602:1977 Determination of the area per unit of mass of powders by various methods of air permeametry.
NF X11-601:1979 Sieving and granulometry. Determination of the area per unit of mass or volume of powders by permeametry. Lea and nurse method.
NF G35-045*NF EN 984:2002 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings.
NF G07-115:1977 Textiles. Test for woven fabrics. Method of determining of mass per unit length and mass per unit area of pieces.
NF T43-002:1954 Rubber. Determination of stress by unit area corresponding to a fixed elongation.
NF P12-102/A1*NF EN 772-2/A1:2005 Methods of test for masonry units - Part 2 : determination of percentage area of voids in masonry units (by paper indentation)
NF G35-004*NF ISO 1763:2022 Textile floor coverings - Determination of number of tufts and/or loops per unit length and per unit area
NF ISO 1763:2022 Revêtements de sol textiles - Détermination du nombre de touffes et/ou de boucles par unité de longueur et par unité de surface
NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
NF B38-304:1993 Textile glass. Mats. Determination of mass per unit area.
NF EN ISO 3892:2001 Couches de conversion sur matériaux métalliques - Détermination de la masse de revêtement par unité de surface - Méthodes gravimétriques
NF G38-108:1995 Geotextiles and geotextiles and geotextile-related products. Determination of mass per unit area.
NF G52-011*NF EN ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
NF P12-102*NF EN 772-2:1999 Methods of test for masonry units - Part 2 : determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
NF G07-171-1*NF EN 29073-1:1992 Textiles. Test methods for nonwovens. Part 1 : determination of mass per unit area.
NF A91-474:1995 CONVERSION COATINGS ON METALLIC MATERIALS. DETERMINATION OF COATING MASS PER UNIT AREA. GRAVIMETRIC METHODS. (EUROPEAN STANDARD EN ISO 3892).
NF A91-474*NF EN ISO 3892:2001 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
NF T57-511:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area.
NF T57-511:1997 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area.
NF EN ISO 1460:2020 Revêtements métalliques - Revêtements de galvanisation à chaud sur métaux ferreux - Détermination gravimétrique de la masse par unité de surface
NF X11-622:1977 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. Various readings of the basic method.
NF A91-480*NF EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
NF G38-066:2004 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers.
NF EN ISO 10352:2020 Plastiques renforcés de fibres - Mélanges à mouler et préimprégnés - Détermination de la masse surfacique et de la masse des fibres par unité de surface
NF EN ISO 2106:2020 Anodisation de l'aluminium et de ses alliages - Détermination de la masse surfacique (masse par unité de superficie) des couches d'oxydation anodique - Méthode gravimétrique
NF L17-721*NF EN 2329:1993 Aerospace series. Textile glass fibre preimpregnates. Test method for the determination of mass per unit area.
NF G07-157:1984 Textiles. Woven fabrics. Construction. Methods of analysis. Determination of the mass of warp and weft per unit area of fabric.
NF A91-123:1995 Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area.
NF G38-066*NF EN 14196:2016 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
NF G38-108*NF EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
NF P84-128-2:2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2 : plastic and rubber sheets.
NF A91-125*NF EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
NF ISO 7211-6:2020 Textiles - Méthodes d'analyse de la construction des tissus - Partie 6 : détermination de la masse des fils de chaîne et de trame par unité de surface d'un tissu
NF A91-125:2002 Metallic coatings and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods.
NF P84-128-1*NF EN 1849-1:1999 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1 : bitumen sheets for roof waterproofing
NF P84-128-2*NF EN 1849-2:2019 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2 : plastics and rubber sheets for roof waterproofing
NF G07-154-6*NF ISO 7211-6:2020 Textiles - Methods for analysis of woven fabrics construction - Part 6 : determination of the mass of wrap and weft per unit area of fabric

Danish Standards Foundation, peak area unit

DS/EN ISO 2286-2:1999 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
DS/EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
DS/EN ISO 23997:2012 Resilient floor coverings - Determination of mass per unit area
DS/EN 12127:1998 Textiles - Fabrics - Determination of mass per unit area using small samples
DS/EN 2557:1997 Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area
DS/EN ISO 3892:2001 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
DS/EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
DS/EN 984:2002 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings
DS/EN ISO 3892:1995 Conversion coatings on metallic materials - Determination of coating mass per unit area- Gravimetric methods
DS/ISO 3892:1983 Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods
DS/ISO 9073-1:1993 Textiles - Test methods for nonwovens - Part 1: Determination of mass per unit areal
DS/EN 29073-1:1993 Textiles. Test methods for nonwoven. Part 1: Determination of mass per unit area
DS/ISO 1460:1980 Metallic coatings. Hot dip galvanized coatings on ferrous materials. Determination of the mass per unit area. Gravimetric method
DS/EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
DS/ISO 2106:1988 Anodizing of aluminium and its alloys. Determination of mass pr. unit area (surface density) of anodic oxide coatings. Gravimetric method
DS/EN 1849-2:2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
DS/EN 14196:2004 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
DS/EN ISO 1460:1996 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
DS/EN 2329:1993 Aerospace series. Textile glass fibre preimpregnates. Test method for the determination of mass per unit area
DS/EN 1849-1:2000 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
DS/EN ISO 10111:2002 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
DS/EN 2559:1998 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
DS/EN ISO 9864:2006 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
DS/EN 718:1996 Resilient floor coverings - Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings
DS/EN 2331:1993 Aerospace series. Textile glass fibre preimpregnates. Test method for the determination of the resin and fibre content and mass of fibre per unit area

Korean Agency for Technology and Standards (KATS), peak area unit

KS M ISO 2286-2-2017(2022) Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
KS M ISO 2286-2:2012 Rubber- or plastics-coated fabrics-Determination of roll characteristics-Part 2:Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS M ISO 2286-2:2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS K ISO 1763:2022 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
KS K ISO 1763-2010(2020) Carpets－Determination of number of tufts and/or loops per unit length and per unit area
KS K ISO 1763:2010 Carpets－Determination of number of tufts and/or loops per unit length and per unit area
KS L ISO 4605-2008(2013) Textile glass－Woven fabrics－Determination of mass per unit area
KS K ISO 23997:2010 Resilient floor coverings－Determination of mass per unit area
KS K ISO 23997-2010(2020) Resilient floor coverings－Determination of mass per unit area
KS F 2234-2016 Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards
KS L ISO 3374:2003 Reinforcement products－Mat and fabics－Determination of mass per unit area
KS L ISO 4605:2008 Textile glass－Woven fabrics－Determination of mass per unit area
KS L ISO 3374-2003(2018) Reinforcement products－Mat and fabics－Determination of mass per unit area
KS D ISO 1460-2002(2022) Hot dip galvanized coating on ferrous materials - Gravimetric determination of the mass per unit area
KS M ISO 10352-2012(2017) Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
KS D ISO 3892-2002(2022) Conversion coatings on metallic materials－Determination of coating mass per unit area－Gravimetric methods
KS K ISO 9073-1:2018 Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area
KS D ISO 1460-2002(2017) Hot dip galvanized coating on ferrous materials - Gravimetric determination of the mass per unit area
KS D ISO 3892-2002(2017) Conversion coatings on metallic materials－Determination of coating mass per unit area－Gravimetric methods
KS K ISO 9073-1:2010 Textiles－Test methods for nonwovens－Part 1：Determination of mass per unit area
KS M ISO 10352-2012(2022) Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
KS D ISO 3892:2002 Conversion coatings on metallic materials－Determination of coating mass per unit area－Gravimetric methods
KS M ISO 10352:2012 Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
KS D 8310-2001 Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-destructive measurement by split-beam microscope)
KS D 8310-1986 Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-destructive measurement by split-beam microscope)
KS K ISO 7211-6:2019 Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric
KS K ISO 9864:2007 Geosynthetics-Test method for the determination of mass per unit area of geotextiles and geotextile-related products
KS D ISO 1460:2002 Hot dip galvanized coating on ferrous materials - Gravimetric determination of the mass per unit area
KS K ISO 9864-2007(2022) Geosynthetics－Test method for the determination of mass per unit area of geotextiles and geotextile-related products
KS D ISO 10111-2012(2017) Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
KS D ISO 10111:2012 Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
KS K ISO 9864-2007(2017) Geosynthetics－Test method for the determination of mass per unit area of geotextiles and geotextile-related products
KS D ISO 10111-2012(2022) Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
KS K ISO 7211-6:2012 Textiles－Woven fabrics－Construction－Methods of analysis－Part 6：Determination of the mass of warp and weft per unit area of fabric

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, peak area unit

GB/T 4669-1995 Textiles--Woven fabrics--Determination of mass per unit length and mass per unit area
GB/T 13762-1992 Geotextiles--Determination of mass per unit area
GB/T 4669-2008 Textiles.Woven fabrics.Determination of mass per unit length and mass per unit area
GB/T 15964-2008 Carpets.Determination of number of tufts or loops per unit length and per unit area
GB/T 9792-2003 Conversion coatings on metallic materials-Determination of coating mass per unit area-Gravimetric methods
GB/T 9914.3-2001 Test method for reinforcement products Part 3: Determination of mass per unit area
GB/T 9914.3-2013 The method for reinforcement products.Part 3:Determination of mass per unit area
GB/T 32788.6-2016 Test method for properties of prepreg.Part 6:Determination of mass per unit area
GB/T 9792-1988 Gravimetric method for determination of coating mass per unit area of conversion coatings on metallic materials
GB/T 24218.1-2009 Textiles.Test methods for nonwovens.Part 1:Determination of mass per unit area
GB/T 31529-2015 Digital printing materials.Computer direct plate-making plate(CTP Plate).Test of unit area weight of photosensitive coating
GB/T 13762-2009 Geosynthetics.Test method for the determination of mass per unit area of geotextiles and geotextile-related products
GB/T 20017-2005 Metallic and other inorganic coatings.Measurement of mass per unit area.Review of gravimetric and chemical analysis methods
GB/T 29256.6-2012 Textiles.Woven fabrics.Construction.Methods of analysis.Part 6:Determination of the mass of warp and weft per unit area of fabric

Lithuanian Standards Office , peak area unit

LST ISO 3801:1998 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
LST EN 14971-2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
LST EN ISO 2286-2:2000 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998)
LST EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
LST EN ISO 23997:2012 Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007)
LST EN 12127-1999 Textiles - Fabrics - Determination of mass per unit area using small samples
LST EN 2557-2001 Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area
LST EN 984-2002 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings
LST EN 29073-1-2000 Textiles - Test methods for nonwovens - Part 1: Determination of mass per unit area
LST EN ISO 3892:2002 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000)
LST EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
LST EN 1849-2-2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
LST EN 14196-2004 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
LST EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)
LST EN 1849-1-2001 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
LST EN 2329-2001 Aerospace series - Textile glass fibre preimpregnates - Test method for the determination of mass per unit area
LST EN 2559-2001 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
LST EN ISO 1460:2001 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992)
LST EN ISO 1460:2020 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)
LST EN 718-2002 Resilient floor coverings - Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings
LST EN ISO 10111:2003 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2000)

AENOR, peak area unit

UNE 40339:2002 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area.
UNE-EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
UNE-EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
UNE 40258:1996 CARPETS. DETERMINATION OF NUMBER OF TUFS AND/OR LOOPS PER UNIT LENGTH AND PER UNIT AREA.
UNE 40243:1974 CARPETS. DETERMINATION OF MASS OF TOTAL PILE YARN PER UNIT AREA.
UNE-EN 12127:1998 TEXTILES. FABRICS. DETERMINATION OF MASS PER UNIT AREA USING SMALL SAMPLES.
UNE-EN ISO 23997:2012 Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007)
UNE-EN 2557:1997 AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF MASS PER UNIT AREA.
UNE 40293:1975 MACHINE MADE TESTILE FLOOR COVERINGS. DETERMINATION OF MASS PER UNIT AREA.
UNE-EN 984:2002 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings.
UNE-EN ISO 3892:2002 Conversion coatings on metallic materials- Determination of coating mass per unit area- Gravimetric methods. (ISO 3892:2000)
UNE-EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
UNE-EN 29073-1:1993 TEXTILES. TEST METHODS FOR NONWOVENS. PART 1: DETERMINATION OF MASS PER UNIT AREA. (ISO 9073-1:989)
UNE-EN 1849-2:2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
UNE-EN 2329:1996 AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA.
UNE 40600-6:1996 TEXTILES. WOVEN FABRICS. CONSTRUCTION. METHODS OF ANALYSIS. PART 6: DETERMINATION OF THE MASS OF WARP AND WEFT PER UNIT AREA OF FABRIC.
UNE-EN 14196:2017 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
UNE-EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)
UNE-EN 2559:1997 AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN AND FIBRE CONTENT AND THE MASS OF FIBRE PER UNIT AREA.
UNE-EN ISO 1460:1996 METALLIC COATINGS. HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS. GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA. (ISO 1460:1992).
UNE-EN 1849-1:2000 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THICKNESS AND MASS PER UNIT AREA - PART 1: BITUMEN SHEETS FOR ROOF WATERPROOFING.
UNE-EN ISO 10111:2002 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods. (ISO 10111:2000)

Professional Standard - Chemical Industry, peak area unit

HG/T 3050.2-2001 Rubber-or plastics-coated fabrics - Determination of roll characteristics - Part 2:Method for determination of total mass per unit area,mass per unit area of coating and mass per unit area of substrate

工业和信息化部, peak area unit

HG/T 3050.2-2020 Determination of properties of whole rolls of rubber or plastic coated fabrics Part 2: Methods for determination of total mass per unit area, coating mass per unit area and mass of base fabric per unit area

German Institute for Standardization, peak area unit

DIN EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998); German version EN ISO 2286-2:1
DIN EN 14971:2006-04 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area; German version EN 14971:2006
DIN EN ISO 10352:2020-12 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
DIN EN ISO 2286-3:1998 Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998
DIN EN ISO 2286-2:2017-01 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-...
DIN 1229:1996 Masses per unit area for gully tops and manhole tops for vehicular and pedestrian areas
DIN EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area; English version of DIN EN 14971:2006-04
DIN 277-3:2005 Areas and volumes of building - Part 3: Quantities and reference units
DIN EN ISO 23997:2012-04 Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007); German version EN ISO 23997:2012
DIN EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-2:2
DIN EN ISO 2286-3:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:2016); German version EN ISO 2286-3:2016
DIN EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
DIN EN 12127:1997-12 Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
DIN EN 772-2:2005 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation); German version EN 772-2:1998 + A1:2005
DIN EN 2557:1997-05 Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area; German version EN 2557:1997
DIN EN ISO 9073-1:2022-06 Nonwovens - Test methods - Part 1: Determination of mass per unit area (ISO/DIS 9073-1:2022); German and English version prEN ISO 9073-1:2022 / Note: Date of issue 2022-05-20*Intended as replacement for DIN EN 29073-1 (1992-08).
DIN EN 984:2002-04 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings; German version EN 984:2001
DIN EN ISO 2420:2017-05 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017); German version EN ISO 2420:2017
DIN EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998
DIN EN 2329:1993-04 Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993
DIN EN ISO 2106:2020-05 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019); German version EN ISO 2106:2020
DIN EN 2329:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993
DIN EN 14196:2004 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers; German version EN 14196:2003
DIN 50990:1993 Measurement of coating thickness; determination of the mass per unit area of metallic coatings by atomic absorption spectrometric method; flame method, F AAS
DIN EN 14196:2016-08 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers; German version EN 14196:2016
DIN EN 29073-1:1992-08 Textiles; test method for nonwovens; part 1: determination of mass per unit area (ISO 9073-1:1989); german version EN 29073-1:1992 / Note: To be replaced by DIN EN ISO 9073-1 (2022-06).
DIN EN ISO 3892:2001-12 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001
DIN EN ISO 1460:2020-12 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020); German version EN ISO 1460:2020
DIN 53220:1978 Paints, varnishes and similar coating materials; paint consumption required for coating an area, concepts and parameters
DIN EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
DIN EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005); German version EN ISO 9864:2005
DIN EN 1849-1:2000-01 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing; German version EN 1849-1:1999 / Note: DIN 52123 (1985-08) remains valid alongside this standard until 2001-09-01.
DIN EN ISO 10111:2019-04 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019); German version EN ISO 10111:2019
DIN EN 1849-2:2019 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing
DIN EN 14196:2016 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers; German version EN 14196:2016
DIN EN ISO 9073-1:2023-09 Nonwovens - Test methods - Part 1: Determination of mass per unit area (ISO 9073-1:2023); German version EN ISO 9073-1:2023
DIN EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
DIN EN ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017); German version EN ISO 2420:2017
DIN EN ISO 10111:2018 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO/DIS 10111:2018); German and English version prEN ISO 10111:2018

European Committee for Standardization (CEN), peak area unit

EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
prEN 672-1992 Cork floorcoverings; determination of mass per unit volume
EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
EN ISO 2286-2:1998 Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 2: Methods for Determination of Total Mass Per Unit Area, Mass Per Unit Area of Coating and Mass Per Unit Area of Substrate ISO 2286-2:1998
prEN 430-1990 Resilient floorcoverings; determination of mass per unit area
EN 14196:2016 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
prEN 718-1992 Resilient floorcoverings; determination of mass per unit area of a reinforcement or a backing
prEN 984-1992 Determination of the mass per unit area of the use surface of needled floorcoverings
EN 430:1994 Resilient Floor Coverings - Determination of Mass per Unit Area
EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples
EN 984:2001 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings
EN 984:1995 Determination of the Mass per Unit Area of the Use Surface of Needled Floor Coverings
prEN 965-1992 Geotextiles and geotextile-related products; determination of mass per unit area
EN 965:1995 Geotextiles and Geotextile-Related Products - Determination of Mass per Unit Area
EN 2557:1997 Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area
EN ISO 3892:1994 Conversion Coatings on Metallic Materials - Determination of Coating Mass per Unit Area - Gravimetric Methods (ISO 3892 : 1980)
EN 29073-1:1992 Textiles - Test Methods for Nonwoven - Part 1: Determination of Mass Per Unit Area
EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
FprEN ISO 9073-1 Nowovens - Test methods - Part 1: Determination of mass per unit area (ISO/FDIS 9073-1:2023)
EN ISO 10352:1997 Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Mass per Unit Area
EN ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
EN ISO 9073-1:2023 Nonwovens - Test methods - Part 1: Determination of mass per unit area (ISO 9073-1:2023)
EN ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
EN 14196:2003 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
EN ISO 3892:2001 Conversion Coatings on Metallic Materials - Determination of Coating Mass Per Unit Area - Gravimetric Methods ISO 3892:2000
EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)
EN 772-2:1998 Methods of test for masonry units ?Part 2: Determination of percentage area of voids in masonry units (by paper indentation) Incorporates Amendment A1: 2005
EN 2329:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unita area
EN ISO 1460:2020 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)
EN 718:1995 Resilient Floor Coverings - Determination of Mass Per Unit Area of a Reinforcement or a Backing of Polyvinyl Chloride Floor Coverings
EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)
EN 1849-1:1999 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
EN ISO 1460:1994 Metallic Coatings - Hot Dip Galvanized Coatings on Ferrous Materials - Gravimetric Determination of the Mass per Unit Area (ISO 1460:1992)
EN 1849-2:2001 Flexible Sheets for Waterproofing - Determination of Thickness and Mass Per Unit Area - Part 2: Plastic and Rubber Sheets for Roof Waterproofing

ZA-SANS, peak area unit

SANS 79:2004 Textiles - Mass per unit area of conditioned fabrics
SANS 147:1986 Carpets - Determination of number of tufts and/or loops per unit length and per unit area
SANS 5385:2005 Mass per unit area of conditioned knitted textiles
SANS 6005:2005 Mass per unit area of effective pile above the substrate of textile floor coverings
SANS 3892:2000 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
SANS 2106:1982 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxide coatings - Gravimetric method
SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

GM Daewoo, peak area unit

GMKOREA EDS-T-7611-2011

Professional Standard - Agriculture, peak area unit

NY/T 251-1995 Determination of mass per unit area of sisal fabric

农业农村部, peak area unit

NY/T 251-2019 Determination of mass per unit area of sisal fabric

IT-UNI, peak area unit

UNI EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
UNI EN ISO 1460:2020 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area

ES-UNE, peak area unit

UNE-EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
UNE-EN ISO 2420:2018 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017)
UNE-EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
UNE-EN ISO 1460:2021 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)
UNE-EN ISO 10111:2020 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
UNE-EN 1849-2:2020 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing

VN-TCVN, peak area unit

TCVN 7837-2-2007 Rubber.or plastics-coated fabrics.Determination of roll characteristics.Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
TCVN 5096-1990 Textiles.Woven fabrics construction.Method of analysis determination of the mass of warp and weft per unit area of fabrics
TCVN 7665-2007 Metallic coatings.Hot dip galvanized coatings on ferrous materials.Gravimetric determination of the mass per unit area

RO-ASRO, peak area unit

STAS SR ISO 9864:1996 Geotextiles Determination of mass per unit area
STAS 8750/3-1972 CARPETS AND MOQUETTES Determination of mass per unit area
STAS 12708-1989 WOVEN FABRICS Determination of mass of warp and weft per unit area of fabric
STAS SR ISO 1460:1994 Metallic coatings. Het dip galvanized coatings on ferrous materials. Gravimetric determination of. the mass per unit area

Japanese Industrial Standards Committee (JISC), peak area unit

JIS K 6404-2-2:1999 Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of the total mass per unit area, coating mass per unit area, and mass per unit area of the substrate
JIS L 1021-5:2007 Textile floor coverings -- Part 5: Determination of number of tufts and/or loops per unit length and per unit area
JIS H 8688:2013 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxidation coatings
JIS H 8688:1998 Test method for determination of mass per unit area of anodic oxide coatings on aluminium and aluminium alloys -- Gravimetric method

PK-PSQCA, peak area unit

PS 143-1961 DETERMINATION OFWEIGHT PER UNIT LENGTH AND WEIGHT PER UNIT AREA OF WOVEN OR KNITTED FABRICS
PS 145-1961 DETERMINATION OF THE WEIGHT OF WARP AND WEFT (FREE FROM ADDED MATTER) PER UNIT AREA OF CLOTH

Indonesia Standards, peak area unit

SNI ISO 3801:2010 Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area)
SNI ISO 7211-6:2011 Textiles - Woven fabric - Construction - Method of analysis - Part 6: Determination of the mass of warp and weft per unit area of fabric

RU-GOST R, peak area unit

GOST 25937-1983 Materials for shoes. Method for determination of specific volume and surface resistance
GOST 6943.16-1994 Textile glass. Woven fabrics. Non-woven cloth. Methods for determination of mass per unit area
GOST R 55398-2013 Reinforced bitumen sheets for waterproofing of bridge decks. Method for determination of thickness and mass per unit area
GOST EN 1849-1-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Methods for determination of thickness and mass per unit area
GOST ISO 9864-2014 Geosynthetics. Test method for the determination of mass per unit area of geotextiles and geotextile-related products

AT-ON, peak area unit

OENORM EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
ONORM S 1403-1975 Textile floor coverings; determination of mass per piece, mass per unit length and mass per unit area
ONORM EN 29073-1-1993 Textiles - Test methods for nonwovens -Determination of mass per unit area
ONORM EN 2329-1993 Aerospace series - Textile glass fibre preimpregnates -Test method for the determination of mass per unit area
OENORM EN ISO 1460:2020 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)

CH-SNV, peak area unit

SN EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
VSM 12011.1-1922
VSM 33811.2-1973
SN ISO 4605:1983 Textile glass — Woven fabrics — Determination of mass per unit area
SN EN ISO 1460:2021 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)

PL-PKN, peak area unit

PN-EN ISO 10352-2021-02 E Fibre-reinforced plastics--Moulding compounds and prepregs--Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
PN-EN ISO 1460-2021-03 E Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area (ISO 1460:2020)

FI-SFS, peak area unit

SFS 3192-1974

NL-NEN, peak area unit

NEN 6155-1972 Determination of mass per area of the pile yarn of carpets

TR-TSE, peak area unit

TS 3243-1978 Machine-Made Textile Floor Coverings- Determination Of Mass Per Unit Area

未注明发布机构, peak area unit

BS EN 430:1994(1999) Resilient floor coverings — Determination ofmass per unit area
ISO 3801:1977/Cor 1:1983 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area. Corrigendum 1
BS EN 965:1995(1999) Geotextiles and geotextile - related products — Determination ofmass per unit area
BS EN 2329:1993(1999) Textile glass fibre preimpregnates — Test method for the determination ofmass per unit area
ISO 3982:2000 Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
BS EN 2331:1993(1999) Textile glass fibre preimpregnates — Test method for the determination ofthe resin and fibre content and mass offibre per unit area

Canadian General Standards Board （CGSB), peak area unit

CGSB 148.1 NO.2-M85-CAN/CGSB-1985 Methodes D'Essai Pour Geotextiles Et Geomembranes Masse Surfacique

PT-IPQ, peak area unit

NP 525-1988 Zinc-coated products Determination of the mass per unit área and of the coating mean thickness
NP 3210-1988 Textiles Carpets. Determination of number of tufts or loopsn per unit lenght and per unit área
NP EN 1849-1-2001 Flexible sheets for waterproofing Determination of thickness and mass per unit area Part 1:Bitumen sheets for roof waterproofing
NP EN 772-2-2001 Methods of test for masonry units Part 2:Determination of percentage area of voids in aggregate concrete masonry units(by paper indentation)

(U.S.) Ford Automotive Standards, peak area unit

FORD FLTM EU-BS 050-2-2000 DETERMINATION OF DENSITY AND THICKNESS OF BOARDS AND WEIGHT PER UNIT AREA OF COATED BOARDS
FORD FLTM EU-BS 050-02-2000 DETERMINATION OF DENSITY AND THICKNESS OF BOARDS AND WEIGHT PER UNIT AREA OF COATED BOARDS
FORD FLTM BN 106-01-2001 DETERMINATION OF WEIGHT PER UNIT AREA AND DENSITY OF TRIM MATERIALS Replaces FLTM BN 006-01, FLTM EU-BN 006-01
FORD FLTM BN 106-1-2001 DETERMINATION OF WEIGHT PER UNIT AREA AND DENSITY OF TRIM MATERIALS (Replaces FLTM BN 006-01, FLTM EU-BN 006-01)

YU-JUS, peak area unit

JUS C.A6.050-1989 Converslou coatlngs trn metal11c materlals. Determinat ion of coating mass per unit area. Gravimotric metbods
JUS C.T7.225-1984 Anodic oxidation of aluminium and aluminium alloys. Determination of mass par unit area of anodic oxide coatings. Gravimetric method

General Motors do Brasil, peak area unit

GMSA LTP.EM.124-2011 Procedure for determining weight per unit area Procedimento para determina@o de peso por unidade de Area Do Not use on New Programs; No Replacement
GMSA LTP .PE.110-2011 Test method for determining the weight per unit area of the backing of PVC 鈥?coated Determina莽茫o do peso por unidade de 谩rea da base de materiais vin铆licos Do Not use on New Programs; No Replacement

TH-TISI, peak area unit

TIS 121.12-2010 Standard test methods for textiles.part 12: woven fabrics.determination of mass per unit length and mass per unit area

国家市场监督管理总局、中国国家标准化管理委员会, peak area unit

GB/T 39500-2020 Leather—Physical and mechanical tests—Determination of apparent density and mass per unit area

IX-SA, peak area unit

AS 1587:1973

ES-AENOR, peak area unit

IN-BIS, peak area unit

IS 9838-1981

Aerospace, Security and Defence Industries Association of Europe (ASD), peak area unit

ASD-STAN PREN 2557-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of Mass Per Unit Area (Issue P 1)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, peak area unit

GB/T 34689-2017 Digital printing materials—Computer direct plate-making plate(CTP Plate)—Test of unit area mass of oxidation layer

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, peak area unit

PREN 2557-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of Mass Per Unit Area (Issue P 1)
PREN 2329-1983 Test Method for the Determination of Mass per Unit Area of Woven Textile Glass Fibre Fabric Preimpregnate Aerospace Series (Edition 1)

Military Standard of the People's Republic of China-General Armament Department, peak area unit

GJB 2589.2A-2021 Test methods for physical and chemical properties of military leather fur Part 2: Determination of apparent density and mass per unit area

CEN - European Committee for Standardization, peak area unit

EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
PREN 1849-2017 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing

GM Holden Ltd, peak area unit

HOLDEN HN 0030-2012 Determination of Mass Per Unit Area of Trim Materials Do Not Use on New Programs, No Replacement. Limited for current use

European Association of Aerospace Industries, peak area unit

AECMA PREN 2559-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area Issue P 1