ZH
RU
ES
How to fix the flange?
How to fix the flange?, Total:114 items.
In the international standard classification, How to fix the flange? involves: Electromechanical components for electronic and telecommunications equipment, Electrical accessories, Pipeline components and pipelines, Fasteners for aerospace construction, Machine tools, Chipless working equipment, Vacuum technology, Internal combustion engines for road vehicles, Shipbuilding and marine structures in general, Resistors, Farming and forestry, Machine tool systems, Semiconductor devices, Fluid storage devices.
TR-TSE, How to fix the flange?
Defense Logistics Agency, How to fix the flange?
- DLA MS20756 REV D-2008 FLANGE, SWIVEL, RETAINING
- DLA MS20756 REV E-2009 FLANGE, SWIVEL, RETAINING
- DLA MS20756 REV F (1)-2012 FLANGE, SWIVEL, RETAINING
- DLA MIL-DTL-24044/1 C-2011 FLANGES, FIXED, COAXIAL LINE, RIGID
- DLA MS20757 REV C-2013 CONNECTOR, FIXED FLANGE, TO HOSE
- DLA DSCC-DWG-89099 REV G-2005 RESISTOR, FIXED, FILM, CHIP, FLANGE MOUNT, SINGLE TAB, HIGH POWER, 10 WATTS
- DLA DSCC-DWG-89100 REV B-2002 SEMICONDUCTOR DEVICE, POWER SWITCHING REGULATOR ASSEMBLY
CZ-CSN, How to fix the flange?
Professional Standard - Electron, How to fix the flange?
- SJ/T 10161.2-1991 Vacuum rubber seal plane flanges.Dimensions of fixed flanges
- SJ 20106-1992 Detail Specification for Fixed Connectors,Electrical,Box Mounting Flange,Crimp Type,Bayonet Coupling,SeriesⅡ,Classes E and T,for JY 27513
- SJ 50599/10-2006 Detail specification for fixed connectors, electrical, wall mounting flange, crimp type, bayonet coupling, series Ⅰ, for JY27466(classes T)
- SJ 50599/11-2006 Detail specification for fixed connectors, electriclal, back panel, box mounting flange, crimp type, bayonet coupling, series Ⅰ,for JY27505(classes E)
FI-SFS, How to fix the flange?
U.S. Air Force, How to fix the flange?
Korean Agency for Technology and Standards (KATS), How to fix the flange?
KR-KS, How to fix the flange?
Association Francaise de Normalisation, How to fix the flange?
- NF E63-117:2008 Tools for pressing - Retainers for flanged punches - Reduced retainers
- NF E63-114:2006 Tools for pressing - Square retainers and backing plates for flanged punches - Top fixing.
- NF E63-113:2006 Tools for pressing - Rectangular retainers and backing plates for flanged punches - Top fixing.
- NF E63-108:2008 Tools for pressing - Square retainers and backing plates for flanged punches - Bottom fixing.
- NF EN 846-4/A1:2005 Méthodes d'essai des composants accessoires de maçonnerie - Partie 4 : détermination de la résistance et de la rigidité des brides de fixation
- NF EN 846-4:2002 Méthodes d'essai des composants accessoires de maçonnerie - Partie 4 : détermination de la résistance et de la rigidité des brides de fixation
- NF E63-107:2008 Tools for pressing - Rectangular retainers and backing plates for flanged punches - Bottom fixing.
- NF E63-107:1997 Press tools. Rectangular retainers and percussion plats for flanged punches. Bottom fixing.
- NF E63-108:1997 Press tools. Square retainers and percussion plates for flanged punches. Bottom fixing.
- NF F56-331:1978 Fixed railway installations. Equipment for overhead telecommunication and signalling lines. Flat steel clamp.
- NF T58-202-4*NF EN 12573-4:2000 Welded static non-pressurised thermoplastic tanks - Part 4 : design and calculation of flanged joints.
- NF E62-507-3:2009 Hollow taper interface with flange contact surface - Part 3 : dimensions of shanks for stationary tools.
- NF E62-507-3*NF ISO 12164-3:2015 Hollow taper interface with flange contact surface - Part 3 : dimensions of shanks for stationary tools
- NF E62-507-4:2009 Hollow taper interface with flange contact surface - Part 4 : dimensions of receivers for stationary tools.
- NF E62-507-4*NF ISO 12164-4:2015 Hollow taper interface with flange contact surface - Part 4 : dimensions of receivers for stationary tools
- NF R16-217:1986 Road vehicles. Single fuel filters with horizontal flanges and centre bolt fixing for compression ignition engines. Mounting and connecting dimensions.
PL-PKN, How to fix the flange?
- PN H74302-1968 Pipelines and ?ixtures S?uds for flanged join?s
- PN M43815-02-1986 Vacuum joints langes of bakable ixed joints
- PN H74303-1968 Pipelines and fixtures High hexagon nuts for flanged join?s
- PN H74301-1968 Pipelines and fixtures Bolts, hexagonal nu?s and dis?ance sleeves for flanged connec?ions Reauiremenfs
Society of Automotive Engineers (SAE), How to fix the flange?
- SAE AGS981-5-1975 AGS981 Female Flanges. (Bolted.) (Steel)
- SAE AS4847-2004 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
- SAE AS4847A-2012 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
- SAE AS4847-1994 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard for
- SAE AS4847A-2007 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
- SAE AIR869B-2014 V-Couplings, Including V-Band and V-Retainer Coupling Assemblies, Flange and Seal Design, Application of
CH-SNV, How to fix the flange?
Professional Standard - Machinery, How to fix the flange?
- JB/ZQ 4743-2006 Flange-fixed cylinder for metallurgical equipment (PN≤0.63MPa)
NO-SN, How to fix the flange?
- NS 2538-1982 Marine industry - Set-on flanges - Nominal pressure PN 16
- NS 2537-1982 Marine industry - Set-on flanges - Nominal pressure PN 10
SAE - SAE International, How to fix the flange?
- SAE AS4847B-2018 Shank Nuts@ Captive Blind Fastener@ Mating Retaining Flange@ Design Standard For
RU-GOST R, How to fix the flange?
- GOST 30676-2000 Circular grinding machines. Flanges for mounting of grinding wheels. Construction and dimensions
- GOST 24934-1981 Vacuum equipment. Fixed screw flanges. Basic and allied dimensions
- GOST 2829-1976 Spigot-mounted magnetos for automobiles and tractors. Fixing dimensions
- GOST 28958-1991 Machinery for forestry. Disc trenchers. Disc-to-hub flange fixing dimensions
- GOST 16195-1970 Blanks of male dies holders for wedged and flanged fixing of male dies of horizontal forging machines. Construction and dimensions
ES-UNE, How to fix the flange?
- SAE AS4847B-2023 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
Professional Standard - Chemical Industry, How to fix the flange?
- HG/T 20635-2009 Specification for selection of steel pipe flanges,gaskets and bolting(Class designated)
- HG 20614-1997(编制说明) Steel pipe flanges, gaskets, fasteners optional regulations (European system)
- HG 20614-1997 Steel pipe flanges, gaskets, fasteners optional regulations (European system)
- HG 20635-1997 Steel pipe flanges, gaskets, fasteners optional regulations (American system)
- HG 20635-1997(编制说明) Steel pipe flanges, gaskets, fasteners optional regulations (American system)
- HG/T 20614-2009 Specication for selection of steel pipe flanges,gaskets and bolting(PN designated)
German Institute for Standardization, How to fix the flange?
- DIN 86059:2013-01 Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10
- DIN 86059:2013 Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10
- DIN 86059:1976 Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10
- DIN 86064:2013-01 Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10
- DIN 86064:2013 Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10
- DIN 86064:1976 Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10
- DIN EN 12573-4:2000 Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints; German version EN 12573-4:2000
- DIN ISO 12164-3:2018-12 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools (ISO 12164-3:2014)
- DIN ISO 12164-4:2018-12 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools (ISO 12164-4:2014)
- DIN 47636-3:1986 Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing without mounting flange and eyelet-fastening for the separable connector
- DIN ISO 12164-3:2018 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools (ISO 12164-3:2014)
- DIN 47636-1:1986 Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing with mounting flange and eyelet-fastening for the separable connector
- DIN ISO 12164-3:2016 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools (ISO 12164-3:2014)
- DIN ISO 12164-4:2018 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools (ISO 12164-4:2014)
- DIN ISO 12164-4:2016 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools (ISO 12164-4:2014)
US-CFR-file, How to fix the flange?
- CFR 13-121.406-2013 Business Credit and Assistance. Part121:Small business size regulations. Section121.406:How does a small business concern qualify to provide manufactured products or other supply items under a small business set- aside, service-disabled veteran- owned sma
Danish Standards Foundation, How to fix the flange?
- DS/ISO 6688:1983 Machinery for forestry. Disc trenchers. Disc-to-hub flange fixing dimensions
International Organization for Standardization (ISO), How to fix the flange?
- ISO 6688:1982 Machinery for forestry; Disc trenchers; Disc-to-hub flange fixing dimensions
- ISO 12164-3:2014 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools
- ISO 12164-3:2008 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools
- ISO 12164-4:2008 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools
- ISO 12164-4:2014 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to fix the flange?
- GB/T 43079.1-2023 Regulations for the selection of steel pipe flanges, gaskets and fasteners Part 1: PN series
- GB/T 43079.2-2023 Regulations for the selection of steel pipe flanges, gaskets and fasteners Part 2: Class series
British Standards Institution (BSI), How to fix the flange?
- BS ISO 12164-3:2008 Hollow taper interface with flange contact surface - Dimensions of shanks for stationary tools
- BS ISO 12164-4:2014 Hollow taper interface with flange contact surface. Dimensions of receivers for stationary tools
- BS ISO 12164-3:2014 Hollow taper interface with flange contact surface. Dimensions of shanks for stationary tools
- BS ISO 12164-4:2008 Hollow taper interface with flange contact surface - Dimensions of receivers for stationary tools
European Committee for Standardization (CEN), How to fix the flange?
- EN 12573-4:2000 Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints
ES-AENOR, How to fix the flange?
Japanese Industrial Standards Committee (JISC), How to fix the flange?
- JIS B 6064-3:2013 Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools
- JIS B 6064-4:2013 Hollow taper interface with flange contact surface.Part 4: Dimensions of receivers for stationary tools
- JIS K 7036:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test method to prove the design of bolted flange joints
European Association of Aerospace Industries, How to fix the flange?
- AECMA PREN 3059-2001 Aerospace Series Bearings, Airframe Rolling Rigid Single Row Ball Bearings in Steel, with Flanged Alignment Housing, Cadmium Plated Dimensions and Loads Edition P 2
- AECMA PREN 3059-1994 Aerospace Series Bearings, Airframe Rolling Rigid Single Row Ball Bearings in Steel, with Flanged Alignment Bush, Cadmium Plated Dimensions and Loads Edition P 1
- AECMA PREN 3060-1994 Aerospace Series Bearings, Airframe Rolling Rigid Single Row Ball Bearings in Steel, Cadmium Plated, with Flanged Alignment Bush, Cadmium Plated Dimensions and Loads
- AECMA PREN 3060-2001 Aerospace Series Bearings, Airframe Rolling Rigid Single Row Ball Bearings in Steel, Cadmium Plated, with Flanged Alignment Housing, Cadmium Plated Dimensions and Loads Edition P 2
- AECMA PREN 3061-1997 Aerospace Series Bearings, Airframe Rolling Rigid Single Row Ball Bearings in Corrosion Resisting Steel, with Flanged Alignment Bush Dimensions and Loads Edition P 1