ZH
RU
ES

Correlation of standard curve

Correlation of standard curve, Total:397 items.

In the international standard classification, Correlation of standard curve involves: Photography, Processes of the textile industry, Products of the textile industry, Test conditions and procedures in general, Tyres, Construction materials, Semiconductor devices, Pipeline components and pipelines, Vocabularies, CHEMICAL TECHNOLOGY, Mechanical testing, Electrical accessories, Rubber and plastics products, Radiocommunications, Applications of information technology, Medical equipment, Water quality, Safety of machinery, Power transmission and distribution networks, Lubrication systems, Paints and varnishes, Air quality, Non-destructive testing, Fruits. Vegetables, Components and accessories for telecommunications equipment, Electrical equipment for working in special conditions, Testing of metals, Farming and forestry, Ergonomics, Accident and disaster control, Road engineering, Measurement of volume, mass, density, viscosity, Analytical chemistry, Fluid power systems, Radiation measurements, Domestic electrical appliances in general, Telecommunication systems, Sterilization and disinfection, Elements of buildings, Software development and system documentation, Quality, Automatic controls for household use, Radiation protection, Mobile services, Electricity. Magnetism. Electrical and magnetic measurements, Character sets and information coding, Optoelectronics. Laser equipment, Installations in buildings, Aerospace electric equipment and systems, Welding, brazing and soldering, Road vehicles in general, Passenger and cabin equipment, Open systems interconnection (OSI), First aid, Fuels, Powder metallurgy, Company organization and management, Telecontrol. Telemetering, Microbiology, Soil quality. Pedology.

American Society for Testing and Materials (ASTM), Correlation of standard curve

ASTM E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM D3888-07 Standard Terminology for Yarn Spinning Systems
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM D4849-02b(2007)e1 Standard Terminology Related to Yarns and Fibers
ASTM D4849-02B(2007)e2 Standard Terminology Related to Yarns and Fibers
ASTM D7235-10 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-21 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-21a Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D6477-02a Standard Terminology Relating to Tire Cord and Fabrics
ASTM C11-10a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-13 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM E431-96(2022) Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
ASTM F412-06 Standard Terminology Relating to Plastic Piping Systems
ASTM E867-06 Standard Terminology Relating to Vehicle-Pavement Systems
ASTM F412-07 Standard Terminology Relating to Plastic Piping Systems
ASTM F412-01a Standard Terminology Relating to Plastic Piping Systems
ASTM F412-01 Standard Terminology Relating to Plastic Piping Systems
ASTM F412-00 Standard Terminology Relating to Plastic Piping Systems
ASTM F412-01ae1 Standard Terminology Relating to Plastic Piping Systems
ASTM C11-07b Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-07a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-07 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM E682-92 Standard Practice for Liquid Chromatography Terms and Relationships
ASTM E682-92(2000) Standard Practice for Liquid Chromatography Terms and Relationships
ASTM E355-96 Standard Practice for Gas Chromatography Terms and Relationships
ASTM E682-92(2011) Standard Practice for Liquid Chromatography Terms and Relationships
ASTM E682-92(2019) Standard Practice for Liquid Chromatography Terms and Relationships
ASTM F412-23 Standard Terminology Relating to Plastic Piping Systems
ASTM E431-96(2016) Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
ASTM D7235-16 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM E355-96(2007) Standard Practice for Gas Chromatography Terms and Relationships
ASTM E682-92(2006) Standard Practice for Liquid Chromatography Terms and Relationships
ASTM C11-03c Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-15a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-10 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-03d Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-08a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-18a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-18b Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-18 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-03b Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-08 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-17 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-16 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM E746-07(2014) Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM F1683-05e1 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component
ASTM F1683-05 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component
ASTM F1683-96a Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Tail Assembly or Membrane Switch Component
ASTM F1683-09 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component
ASTM C11-06 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C286-22 Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
ASTM D7235-05 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-14 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D6109-19 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
ASTM C11-01 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-02 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-01a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-98 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-02a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-04 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-05 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM E355-96(2021)e1 Standard Practice for Gas Chromatography Terms and Relationships
ASTM E355-96(2001) Standard Practice for Gas Chromatography Terms and Relationships
ASTM E355-96(2014) Standard Practice for Gas Chromatography Terms and Relationships
ASTM C11-23 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM E2955-13 Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
ASTM E1936-20 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems
ASTM E1541-98 Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM E2793-22 Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment
ASTM E2793-16 Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment
ASTM D4587-05 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D4587-23 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D6477-03 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM E1936-15 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems
ASTM B913-00e1 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM B913-00 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM D1914-95(2004)e1 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM E1815-18(2023) Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E746-17 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM E746-18 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM E1815-06 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-08(2013)e1 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E2446-23 Standard Practice for Manufacturing Characterization of Computed Radiography Systems
ASTM D1914-95(2010) Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM E2397/E2397M-19 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
ASTM E2397/E2397M-15 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
ASTM D6477-23 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D3016-97 Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
ASTM D5256-05 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM D5256-05(2009) Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM E2793-10 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment
ASTM E2793-10e1 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment
ASTM D5256-14 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM D2260-03 Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM B913-05 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM B913-05(2010) Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM D5256-00 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM E1891-97(2002) Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-97 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-10 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E2397-05 Standard Practice for Determination of Dead Loads and Live Loads associated with Green Roof Systems
ASTM E1891-10a Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E2445/E2445M-14 Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems
ASTM E1891-21 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E2445-05(2010) Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems
ASTM F1268-90(2003) Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems
ASTM F1268-90(2008) Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems
ASTM F1268-90(2012) Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems
ASTM F3143-20 Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator
ASTM D7757-22 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM E1891-10a(2015) Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM B761-06(2011) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-17 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM E1735-95(2000)e1 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MV
ASTM E1735-19 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems from 4 to 25 MeV
ASTM B761-17(2021) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM E1765-07 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
ASTM D7464-19 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D7464-20 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D7464-08(2013) Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

RO-ASRO, Correlation of standard curve

STAS 6901-1978 Psycho-physiological acou stics STANDARD CURVES OF EQUAL LOUDNESS LEVEL AND RELATIONS BETWEEN SOUND PRESSURE LEVELS

VE-FONDONORMA, Correlation of standard curve

SAE - SAE International, Correlation of standard curve

SAE AS4075/1A-2012 Optical Implementation Relating to the High Speed Ring Bus (HSRB) Standard
SAE USCAR39-2019 STANDARD FOR TIRE TRACEABILITY CONTENT AND FORMAT FOR THE RADIO-FREQUENCY IDENTIFICATION (RFID) TAG AND ASSOCIATED TIRE DATA SET

Underwriters Laboratories (UL), Correlation of standard curve

UL 870 BULLETIN-2002 UL Standard for Safety Wireways@ Auxiliary Gutters@ and Associated Fittings
UL 870-2016 UL Standard for Safety Wireways@ Auxiliary Gutters@ and Associated Fittings (Ninth Edition)
UL 870 BULLETIN-2012 UL Standard for Safety Wireways@ Auxiliary Gutters@ and Associated Fittings (COMMENTS DUE: JANUARY 14@ 2013)
UL 870 BULLETIN-2018 UL Standard for Safety Wireways@ Auxiliary Gutters@ and Associated Fittings (COMMENTS DUE: November 26@ 2018)
UL 870 BULLETIN-2016 UL Standard for Safety Wireways@ Auxiliary Gutters@ and Associated Fittings (COMMENTS DUE: FEBRUARY 22@ 2016)
UL 870 BULLETIN-2008 UL Standard for Safety Wireways@ Auxiliary Gutters@ and Associated Fittings (COMMENTS DUE: FEBRUARY 6@ 2008)
UL 870 BULLETIN-2015 UL Standard for Safety Wireways@ Auxiliary Gutters@ and Associated Fittings (COMMENTS DUE: DECEMBER 18@ 2015)
UL 870-1995 UL Standard for Safety Wireways@ Auxiliary Gutters@ and Associated Fittings (Seventh Edition; Reprint with Revisions Through and Including December 15@ 1997)

US-FCR, Correlation of standard curve

FCR AF ETL 00-7-2000 FIRE PROTECTION ENGINEERING CRITERIA - CORRELATION OF US AND HOST NATION CODES AND CRITERIA

International Telecommunication Union (ITU), Correlation of standard curve

ITU-R M.631-1-1992 USE OF HYPERBOLIC MARITIME RADIONAVIGATION SYSTEMS IN THE BAND 283.5-315 kHz
ITU-R SA.1155-1-2013 Protection criteria related to the operation of data relay satellite systems
ITU-R SA.1155-2017 Protection criteria related to the operation of data relay satellite systems
ITU-T R.51-1989 Standardized Text for Distortion Testing of the Code-Independent Elements of a Complete Circuit - Telegraph Transmission (Study Group IX) 2 pp
ITU-T R.51-1988 STANDARDIZED TEXT FOR DISTORTION TESTING OF THE CODE - INDEPENDENT ELEMENTS OF A COMPLETE CIRCUIT
ITU-T R.51 BIS-1988 STANDARDIZED TEXT FOR TESTING THE ELEMENTS OF A COMPLETE CIRCUIT
ITU-R F.1402 FRENCH-1999 FREQUENCY SHARING CRITERIA BETWEEN A LAND MOBILE WIRELESS ACCESS SYSTEM AND A FIXED WIRELESS ACCESS SYSTEM USING THE SAME EQUIPMENT TYPE AS THE MOBILE WIRELESS ACCESS SYSTEM
ITU-R F.1402-1999 Frequency Sharing Criteria between a Land Mobile Wireless Access System and a Fixed Wireless Access System Using the Same Equipment Type as the Mobile Wireless Access System
ITU-R F.1402 SPANISH-1999 Frequency Sharing Criteria between a Land Mobile Wireless Access System and a Fixed Wireless Access System Using the Same Equipment Type as the Mobile Wireless Access System
ITU-R QUESTION 1046-1999 Sharing criteria for BSS networks in the 17.3-17.8 GHz band in Region 2, and in the 21.4-22 GHz band in Regions 1 and 3, and their associated feeder links

Association Francaise de Normalisation, Correlation of standard curve

NF T90-396*NF EN 15843:2010 Water quality - Guidance standard on determining the degree of modification of river hydromorphology
NF EN 301025:2022 Équipements de radiotéléphone en VHF pour la téléphonie générale et équipements associés pour appel numérique sélectif (DSC) de classe " D " - Norme harmonisée pour l'accès au spectre radioélectrique et pour les fonctionnalités relati...
CLC/TR 50417:2016 Safety of household and similar electrical appliances - Interpretations related to European Standards in the EN 60335 series
NF EN 61935-3:2010 Essais des câblages de technologies de l'information symétriques et coaxiaux - Partie 3 : câblages installés selon les spécifications de l'EN 50173-4 et des normes connexes
NF C93-587-2*NF EN 61935-2:2018 Specification for the testing of balanced and coaxial information technology cabling - Part 2 : cords as specified in ISO/IEC 11801 and related standards
NF EN 61935-2:2018 Spécification relative aux essais des câblages symétriques et coaxiaux des technologies de l'information - Partie 2 : cordons tels que spécifiés dans l'ISO/IEC 11801 et normes associées
NF EN 3783:2015 Série aérospatiale - Matériaux composites à base de fibres - Standardisation des caractéristiques mécaniques liées aux fibres
XP CEN/TS 115-4:2020 Sécurité des escaliers mécaniques et trottoirs roulants - Partie 4 : interprétations relatives aux normes de la famille EN 115
NF EN 4705:2020 Série aérospatiale - Méthodes de mesure du comportement lié à la durée de vie des systèmes d'éclairage dans un environnement normalisé destiné aux aéronefs
NF L53-400-008*NF EN 4008-008:2011 Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008 : positioner for crimping tool M22520/7-01 - Product standard.
NF L53-400-007*NF EN 4008-007:2011 Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007 : positioner for crimping tool M22520/2-01 - Product standard.
NF EN 301489-34:2020 Norme de compatibilité électromagnétique (CEM) pour les équipements et services radioélectriques - Partie 34 : conditions spécifiques relatives à la source d'alimentation externe (EPS) des téléphones mobiles - Norme harmonisée couvrant les e...
NF L55-072*NF EN 4705:2020 Aerospace series - Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment
NF C93-587-3*NF EN 61935-3:2010 Testing of balanced and coaxial information technology cabling - Part 3 : installed cabling as specified in EN 50173-4 and related standards
NF L09-777:2020 Série aérospatiale - Codification des références relatives aux produits semi-ouvrés métalliques normalisés sélectionnés pour les constructions aéronautiques
NF EN 50445:2008 Norme de famille de produit pour démontrer la conformité d'un équipement pour le soudage par résistance, le soudage à l'arc et les techniques connexes avec les restrictions de base concernant l'exposition des personnes aux champs électromagné...

British Standards Institution (BSI), Correlation of standard curve

BS EN 15843:2010 Water quality - Guidance standard on determining the degree of modification of river hydromorphology
BS PD ISO/TR 22100-1:2015 Safety of machinery. Relationship with ISO 12100. How ISO 12100 relates to type-B and type-C standards
BS PD CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100. Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015)
PD CEN/TS 115-4:2020 Safety of escalators and moving walks. Interpretations related to EN 115 family of standards
BS EN 61935-3:2010 Testing of balanced and coaxial information technology cabling. Installed cabling as specified in EN 50173-4 and related standards
BS EN 61935-3:2009 Testing of balanced and coaxial information technology cabling - Installed cabling as specified in EN 50173-4 and related standards
BS ISO/IEC 14143-6:2012 Information technology. Software measurement. Functional size measurement. Guide for use of ISO/IEC 14143 series and related International Standards
ISO/IEC 13673:2000 Ed 1 INFORMATION TECHNOLOGY-DOCUMENT PROCESSING AND RELATED COMMUNICATION CONFORMANCE TESTING FOR STANDARD GENERALISED MARKUP LANGUAGE (SGML) SYSTEMS
BS EN 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling. Part 2: Cords as specified in ISO/IEC 11801 and related standards
BS DD IEC/TS 62351-6:2007 Power systems management and associated information exchange - Data and communication security - Security for IEC 61850 profiles
20/30347555 DC BS EN 61935-2. Specification for the testing of balanced and coaxial information technology cabling - Part 2. Cords as specified in ISO/IEC 11801 and related standards
PD CLC/TR 50417:2016 Tracked Changes. Safety of household and similar electrical appliances. Interpretations related to European Standards in the EN 60335 series
BS PD ISO/TS 16949:2009 Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
BS EN 4705:2020 Aerospace series. Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment
DD CEN/TS 81-11:2011 Safety rules for the construction and installation of lifts. Basics and interpretations - Interpretations related to EN 81 family of standards
BS EN ISO 11151-1:2000 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
BS PD IEC/TS 62351-5:2013 Power systems management and associated information exchange. Data and communications security. Security for IEC 60870-5 and derivatives
BS EN 50397-2:2009 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Accessories for covered conductors - Tests and acceptance criteria
BS EN 50397-2:2010 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC. Accessories for covered conductors. Tests and acceptance criteria
17/30370985 DC BS EN 4705. Aerospace series. Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Correlation of standard curve

ITU-R SA.1155-2-2017 Protection criteria related to the operation of data relay satellite systems
ITU-R M.584-1-1986 Standard Codes and Formats for International Radio Paging - Section 8A - Land Mobile Service and Related Subjects
QUESTION 104/6-1999 Sharing criteria for BSS networks in the 17.3-17.8 GHz band in Region 2@ and in the 21.4-22 GHz band in Regions 1 and 3@ and their associated feeder links

Institute of Electrical and Electronics Engineers (IEEE), Correlation of standard curve

IEEE 2846-2022 IEEE Standard for Assumptions in Safety-Related Models for Automated Driving Systems
IEEE Std 2846-2022 IEEE Standard for Assumptions in Safety-Related Models for Automated Driving Systems
IEEE PC93.4/D14, Sept ember 2011 IEEE Draft Standard for Power-Line Carrier Line-Tuning Equipment (30-500 kHz) Associated With Power Transmission Lines
IEEE PC93.4/D15, January 2012 IEEE Draft Standard for Power-Line Carrier Line-Tuning Equipment (30-500 kHz) Associated With Power Transmission Lines
IEEE Std 539-1990 IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
IEEE Std 539-2005 IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
IEEE Std 539-2020 IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
IEEE Std 738-1993 IEEE Standard for Calculating the Current - Temperature Relationship of Bare Overhead Conductors
ANSI/IEEE Std C37.90-1989 IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE Std C37.90-1978 IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
ANSI/IEEE C37.90-1978 IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE P539/D5, April 2020 IEEE Draft Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
IEEE Std P539/D7, Jan 2004 IEEE Draft Standard for Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
IEEE Std 599-1985 IEEE Standard Definitions of Power Systems Data Transmission and Related Channel Terminology
IEEE P738/D10, April 2023 IEEE Approved Draft Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors
IEEE P539/D6, September 2020 IEEE Draft Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
IEEE Std 738-2012 IEEE Draft Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors
IEEE Std P738-2012 Draft 09 IEEE Draft Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors
IEEE Std PC37.90/D15, Jan 2004 Unapproved IEEE Draft Standard for Relays and Relay Systems Associated With Electric Power Apparatus
IEEE P1900.1a/D2.0, August 2012 IEEE Approved Draft Standard for Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management Amendment: Addition of New Terms and Associated Definitions
IEEE Std 1547.1-2020 - Redline IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Energy Resources with Electric Power Systems and Associated Interfaces - Redline
IEEE Std 738-2012 Draft 10 IEEE Draft Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors
IEEE P738/D9, January 2023 IEEE Draft Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors
IEEE Std 1900.1a-2012 IEEE Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management Amendment 1: Addition of New Terms and Associated Definitions
IEEE P738-2012_Cor 1-2013/D2, August 2013 IEEE Approved Draft Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors - Corrigendum 1
IEEE P1900.1/D2, September 2018 IEEE ApprovedDraft Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
IEEE Std 1900.1-2008 IEEE Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
IEEE Std 1900.1-2019 IEEE Standard for Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
ANSI/IEEE Std C37.71-1984 IEEE Standard for Three-Phase, Manually Operated Subsurface Load Interrupting Switches for Alternating-Current Systems
IEEE P1900.1a/D1.0, May 2012 IEEE Draft Standard for Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management Amendment: Addition of New Terms and Associated Definitions
IEEE Std 1547-2018 IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
IEEE P1900.1/D1, September 2018 IEEE Draft Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
IEEE 1453-2022 IEEE Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE Unapproved Draft Std P1900.1/D4.00, Mar 2008 IEEE Draft Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
IEEE Unapproved Draft Std P1900.1/D2.0, Aug 2007 IEEE Draft Standard Definitions and Concepts for Dynamic Spectrum Access-Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
P1900.1/D1, September 2018 IEEE Draft Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
IEEE P1547/D7.0, September 2017 IEEE Draft Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
IEEE P1547/D7.3, December 2017 IEEE Draft Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
IEEE P1547/D7.2, November 2017 IEEE Draft Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
IEEE P1547/D7.1, November 2017 IEEE Draft Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
IEEE P1547/D6.7.2, May 2017 IEEE Draft Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
NFPA (Fire) 51 Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes, 2018 Edition
IEEE P1453/D4.1, May 2021 IEEE Draft Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE P1453/D5.1, February 2022 IEEE Draft Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE P1453/D5.0, December 2021 IEEE Draft Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE P802.15.4z/D08, March 2020 IEEE Approved Draft Standard for Low-Rate Wireless Networks Amendment: Enhanced Ultra WideBand (UWB) Physical Layers (PHYs) and Associated Ranging Techniques
IEEE Std P270/D6b Unapproved IEEE Draft Standard Definitions for Selected Quantities, Units, and Related Terms, With Special Attention to the International System (SI) (Superseded)
IEEE 2800-2022 IEEE Standard for Interconnection and Interoperability of Inverter-Based Resources (IBRs) Interconnecting with Associated Transmission Electric Power Systems
IEEE Std 2800-2022 IEEE Standard for Interconnection and Interoperability of Inverter-Based Resources (IBRs) Interconnecting with Associated Transmission Electric Power Systems
IEEE PC37.90.1/D6.1, June 2012 (Approved Draft) IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE PC37.90.1/D6.1, June 2012 IEEE Draft Standard Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
ANSI Std N42.6-1980 American National Standard Interrelationship of Quartz-Fiber Electrometer Type Exposure Meters and Companion Exposure Meter Chargers
IEEE N42.6-1980 American National Standard Interrelationship of Quartz-Fiber Electrometer Type Exposure Meters and Companion Exposure Meter Chargers
IEEE P1547a/D1.3, December 2019 IEEE Draft Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces - Amendment 1
IEEE Std 1547.1-2020 IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Energy Resources with Electric Power Systems and Associated Interfaces - Redline
IEEE Std C37.90.1/COR 2-2004 Correction to: IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Correlation of standard curve

IEEE C37.90-1989 Standard for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE C37.90-2005 Standard for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE 599-1985 STANDARD DEFINITIONS OF POWER SYSTEMS DATA TRANSMISSION AND RELATED CHANNEL TERMINOLOGY
IEEE C37.71-1984 Standard for Three-Phase@ Manually Operated Subsurface Load-Interrupting Switches for Alternating-Current Systems
IEEE C37.71-2001 Standard for Three-Phase@ Manually Operated Subsurface and Vault Load-Interrupting Switches for Alternating-Current Systems
IEEE P1900.1/D1-2018 Draft Standard for Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks@ System Functionality@ and Spectrum Management
IEEE P1900.1/D2-2018 Draft Standard for Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks@ System Functionality@ and Spectrum Management
IEEE 738-1993 Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors (Includes Access to Additional Content)
IEEE P1547.1/D9.5-2019 Draft Standard Conformance Test Procedures for Equipment Interconnecting Distributed Energy Resources with Electric Power Systems and Associated Interfaces

ISA - International Society of Automation, Correlation of standard curve

ISA S67.02-1980 Nuclear-Safety-Related Instrument Sensing Line Piping and Tubing Standards for Use in Nuclear Power Plants
ISA 67.02.01-2014 Nuclear Safety-Related Instrument-Sensing Line Piping and Tubing Standard for Use in Nuclear Power Plants
ISA S67.02.01-1996 Nuclear Safety-Related Instrument Sensing Line Piping and Tubing Standard for Use in Nuclear Power Plants

German Institute for Standardization, Correlation of standard curve

DIN EN 303095:2018 Reconfigurable Radio Systems (RRS) - Radio reconfiguration related architecture for Mobile Devices (MD) (Endorsement of the English version EN 303 095 V1.3.1 (2018-05) as a German standard)
DIN EN 303095:2015 Reconfigurable Radio Systems (RRS) - Radio Reconfiguration related Architecture for Mobile Devices (Endorsement of the English version EN 303 095 V1.2.1 (2015-06) as German standard)
DIN CEN ISO/TR 22100-1:2021-09 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021); German version CEN ISO/TR 22100-1:2021
DIN EN 302969:2018 Reconfigurable Radio Systems (RRS) - Radio Reconfiguration related requirements for Mobile Devices (Endorsement of the English version EN 302 969 V1.3.1 (2018-05) as a German standard)
DIN EN 302969:2015 Reconfigurable Radio Systems (RRS) - Radio Reconfiguration related Requirements for Mobile Devices (Endorsement of the English version EN 302 969 V1.2.1 (2014-11) as German standard)
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN EN 4705:2019 Aerospace series - Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment; German and English version FprEN 4705:2019
DIN CEN/TS 115-4:2020-11 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards; German version CEN/TS 115-4:2020
DIN ETS 300435:1996 Radio Equipment and Systems (RES) - Digital European Cordless Telecommunications (DECT) - Data Services Profile (DSP) - Base standard including inter-Working to connectionless networks (Service types A and B, Class 1); English version ETS 300435:1996
DIN EN 302217-2-1:2015 Fixed Radio Systems - Characteristics and requirements for point-to-point equipment and antennas - Part 2-1: System-dependent requirements for digital systems operating in frequency bands where frequency co-ordination is applied (Endorsement of the Englis
DIN EN 302217-2-1:2010 Fixed Radio Systems - Characteristics and requirements for point-to-point equipment and antennas - Part 2-1: System-dependent requirements for digital systems operating in frequency bands where frequency co-ordination in applied (Endorsement for the Engli
DIN CLC/TR 50417:2012 Safety of household and similar electrical appliances - Interpretations related to European Standards in the EN 60335 series; German version CLC/TR 50417:2010
DIN EN 4705:2020-05 Aerospace series - Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment; German and English version EN 4705:2020

RTCA - RTCA@ Inc., Correlation of standard curve

RTCA DO-242A CHG 1-2006 Minimum Aviation System Performance Standards for Automatic Dependent Surveillance Broadcast (ADS B)
RTCA DO-242-1998 Minimum Aviation System Performance Standards for Automatic Dependent Surveillance Broadcast (ADS-B) (*** ONLY AVAILABLE IN HARDCOPY ***)

US-RTCA, Correlation of standard curve

RTCA DO-242A-2002 Minimum Aviation System Performance Standards for Automatic Dependent Surveillance Broadcast (ADS-B)

American National Standards Institute （ANSI), Correlation of standard curve

ANSI LC1-2013 Standard for Gas Piping Systems using Corrugated Stainless Steel Tubing (CSST), same as CSA 6.26
ANSI/ATIS 0600328-2012 Protection of Telecommunications Links from Physical Stress and Radiation Effects Associated Requirements for DC Power Systems (A Baseline Standard)
ANSI (NFPA)T 2.25.1 R 2-2005 Pneumatic Fluid Power - Systems Standard For Industrial Machinery - Supplement to ISO 4414:1998 - Pneumatic Fluid Power - General Rules Relating To Systems
ANSI N42.5-1965 American National Standard Interrelationship of QuartzXiber ?leckometer Type Exposure Meters and Companion Exposure Meter Chargers
NFPA 51-2018 Standard for the Design and Installation of Oxygen�CFuel Gas Systems for Welding@ Cutting@ and Allied Processes (Effective Date: 08/11/2016)

European Association of Aerospace Industries, Correlation of standard curve

AECMA PREN 4008-006-1997 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 006: Positioner for Crimping Tool M22520/7 Product Standard Edition P 1
AECMA PREN 4008-007-1997 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 007: Positioner for Crimping Tool M22520/2-01 Product Standard Edition P 1
AECMA PREN 4008-008-1996 Aerospace Series Elements of Electrical and Optical Connection General Accessories and Tooling Positioner for Crimping Tool M22520/7-01 Electrical Contacts According to EN 3155-016 Part 008 - Product Standard
AECMA PREN 3373-010-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 癈 for metric and inch stud series Product standard Edition
AECMA PREN 3373-011-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 癈 for metric and inch stud series Product standard Editi
AECMA PREN 3373-012-2003 Aerospace Series Terminal Lugs and In-line Splices for Crimping on Electric Conductors Part 012: In-line Splices, Insulated and Sealed, for Crimping on Copper Conductors, Temperature up to 150 Degrees C Product Standard Edition P 1
AECMA PREN 3373-013-2003 Aerospace Series Terminal Lugs and in-line Splices for Crimping on Electric Conductors Part 013: In-line Splices, Insulated and Moisture Resistant, for Crimping on Copper Conductors, temperature up to 260 degrees C Product Standard Edition P 1
AECMA PREN 4008-002-1998 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 002: List of Product Standards Edition P 1

International Electrotechnical Commission (IEC), Correlation of standard curve

IEC 61935-1:2009/COR1:2010 Specification for the testing of balanced and coaxial information technology cabling – Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards CORRIGENDUM 1 (Edition 3.0)
IECEx 02:2017 IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) - Rules of Procedure
IECEx 01-S-2017 IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres (IECEx System) - IECEx Supplement to Harmonized Basic Rules IEC CA 01
IEC 61935-3:2008 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
IEC 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards
IEC 61935-1-1:2019 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards
IEC 61935-2:2022 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards
IEC 61935-2:2022 CMV Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards
IEC 61935-1:2015 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards
IEC 61935-1:2009 Specification for testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards

GOSTR, Correlation of standard curve

GOST R 7.0.98-2018 System of standards on information, librarianship and publishing. International standard identifier for libraries and related organizations (ISIL)
GOST R 60.6.3.20-2020 Robots and robotic devices. Robots for pipeline systems diagnostics. Performance criteria and related test methods

ES-UNE, Correlation of standard curve

UNE-CEN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021) (Endorsed by Asociación Española de Normalización in March of 2021.)
UNE-EN 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling -- Part 2: Cords as specified in ISO/IEC 11801 and related standards (Endorsed by AENOR in October of 2010.)
UNE-EN 61935-3:2009 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards (Endorsed by AENOR in April of 2010.)
UNE-CEN/TS 115-4:2021 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards
UNE-EN 4705:2020 Aerospace series - Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment (Endorsed by Asociación Española de Normalización in April of 2020.)

European Committee for Standardization (CEN), Correlation of standard curve

EN ISO/TR 9241-100:2011 Ergonomics of human-system interaction - Part 100: Introduction to standards related to software ergonomics
EN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
EN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
CEN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021)
EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
PD CEN/TS 115-4:2015 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards
CEN/TS 115-4:2020 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards

PT-IPQ, Correlation of standard curve

NP EN 1317-2-2000 Road restraint systems Part 2:Performance classes,impact test acceptance and test methods for safety barriers
NP EN 1317-1-2000 Raod restraint systems Part 1:Terminology and general criteria for test methods

National Association of Corrosion Engineers (NACE), Correlation of standard curve

NACE TM0101-2012 Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems (Item No. 21240)
NACE TM0497-2002 Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems Item No. 21231
NACE TM0101-2001 Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Tank Systems Item No:21240

Danish Standards Foundation, Correlation of standard curve

DS/ISO/TR 22100-1:2021 Safety of machinery – Relationship with ISO 12100 – Part 1: How ISO 12100 relates to type-B and type-C standards
DS/IEC 68-2-57:1990 International Electrotechnical Commission IEC Publication No. 68-2-57:1989 Environmental testing - Part 2: Tests - Test Ff: Vibration - Time-history method
DS/CLC/TR 50417:2010 Safety of household and similar electrical appliances - Interpretations related to European Standards in the EN 60335 series
DS/EN 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards
DS/EN 61935-3:2010 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards
DS/ISO/IEC 13673:2001 Information technology - Document processing and related communication - Conformance Testing for Standard Generalized Markup Language (SGML) Systems
DS/CEN ISO/TR 22100-1:2021 Safety of machinery – Relationship with ISO 12100 – Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021)
DS/EN 50428/A2:2009 Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
DS/EN 50428/A1:2008 Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
DS/EN 50428:2006 Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
DS/EN 50383:2010 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz)
DS/EN 50383/AC:2013 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz)
DS/EN 50397-2:2010 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria
DS/EN 50445:2008 Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
DS/ISO/IEC 10742:1996 Information technology - Telecommunications and information exchange between systems - Elements of management related to OSI Data Link Layer standards

CEN - European Committee for Standardization, Correlation of standard curve

CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
PD CEN/TS 115-4:2014 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards

Korean Agency for Technology and Standards (KATS), Correlation of standard curve

KS A ISO 12789-2:2012 Reference radiation fields－Simulated workplace neutron fields－Part 2：Calibration fundamentals related to the basic quantities
KS C IEC 61935-3:2014 Testing of balanced and coaxial information technology cabling — Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
KS X ISO/IEC 13673:2003 Information technology-Document processing and related communication-Conformance testing for Standard Generalized Markup Language(SGML) systems
KS X ISO/IEC 13673-2015(2020) Information technology — Document processing and related communication — Conformance testing for Standard Generalized Markup Language(SGML) systems
KS X ISO/IEC 13673:2015 Information technology — Document processing and related communication — Conformance testing for Standard Generalized Markup Language(SGML) systems
KS C IEC 61935-3-2014(2019) Testing of balanced and coaxial information technology cabling — Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
KS X ISO/IEC 10742:2007 Information technology-Telecommunications and information exchange between systems-Elements of management information related to OSI Data Link Layer standards
KS X ISO/IEC 10742:2013 Information technology－Telecommunications and information exchange between systems－Elements of management information related to OSI Data Link Layer standards

NATO - North Atlantic Treaty Organization, Correlation of standard curve

STANAG 1001-1994 Standardized System of Designating Days and Hours in Relation to an Operation or Exercise (ED 7 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2
STANAG 1001-1991 Standardized System of Designating Days and Hours in Relation to an Operation or Exercise (ED 6 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2
STANAG 1001-1982 Standardized System of Designating Days and Hours in Relation to an Operation or Exercise (ED 5 AMD 4; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2

European Committee for Electrotechnical Standardization（CENELEC）, Correlation of standard curve

CLC/TR 50417-2014 Safety of household and similar electrical appliances - Interpretations related to European Standards in the EN 60335 series
CLC/TR 50417-2016 Safety of household and similar electrical appliances - Interpretations related to European Standards in the EN 60335 series
EN 61935-3:2009 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards
EN 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards

CENELEC - European Committee for Electrotechnical Standardization, Correlation of standard curve

CLC/TR 50417-2010 Safety of household and similar electrical appliances - Interpretations related to European Standards in the EN 60335 series
EN 61935-2:2003 Generic cabling systems – Specification for the testing of balanced communication cabling in accordance with EN 50173 Part 2: Patch cords and work area cords (Incorporating Corrigendum September 2003)
EN 61935-2:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 Part 2: Patch cords and work area cords (Incorporating Corrigendum December 2005)

Society of Automotive Engineers (SAE), Correlation of standard curve

SAE USCAR39-1-2020 STANDARD FOR TIRE TRACEABILITY CONTENT AND FORMAT FOR THE RADIO-FREQUENCY IDENTIFICATION (RFID) TAG AND ASSOCIATED TIRE DATA SET

未注明发布机构, Correlation of standard curve

BS EN 50428:2005+A2:2009(2010) Switches for household and similar fixed electrical installations — Collateral standard — Switches and related accessories for use in home and building electronic systems (HBES)
ISO 13673:2000 information technology — Document processing and related communication — Conformance testing for Standard Generalized Markup Language (SGML) systems
BS EN 50383:2010(2013) Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz 40 GHz) -

Canadian Standards Association (CSA), Correlation of standard curve

CSA ISO/TR 14061-00-CAN/CSA:2000(R2004) Information pour assister les organismes forestiers dans l'utilisation des normes ISO 14001 et ISO 14004 relatives aux syst鑝es de management environnemental Premi鑢e 閐ition
CAN/CSA-ISO/IEC 13673:2002 Information technology - Document processing and related communication - Conformance testing for Standard Generalized Markup Language (SGML) systems
CAN/CSA-ISO/IEC 10742:1994 Information technology - Telecommunications and information exchange between systems - Elements of management information related to OS1 Data Link Layer standards

International Organization for Standardization (ISO), Correlation of standard curve

ISO/IEC 13673:2000 Information technology - Document processing and related communication - Conformance testing for Standard Generalized Markup Language (SGML) systems
ISO/IEC 14143-6:2012 Information technology - Software measurement - Functional size measurement - Part 6: Guide for use of ISO/IEC 14143 series and related International Standards
ISO/TS 16949:2009 Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
ISO/IEC 10737:1998 Information technology - Elements of management information related to the OSI transport layer
ISO/IEC 10733:1998 Information technology - Elements of management information related to the OSI network layer

ANSI - American National Standards Institute, Correlation of standard curve

INCITS/ISO/IEC 13673:2000 Information technology - Document processing and related communication - Conformance testing for Standard Generalized Markup Language (SGML) systems

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Correlation of standard curve

GB/T 26234-2010 Information technology.Document processing and related communication.Conformance testing for standard generalized markup language(SGML) systems
GB/T 27408-2010 Quality control in laboratories.Evaluating validity of non-standard test method.Practice for a linear relationship
GB/T 18491.6-2010 Information technology.Software measurement.Functional size measurement.Part 6:Guide for use of GB/T 18491 series and related standards

AT-ON, Correlation of standard curve

ONR CEN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021)
ONR CEN/TS 115-4-2020 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards (CEN/TS 115-4:2020)

Lithuanian Standards Office , Correlation of standard curve

LST EN 50428-2005 Switches for household and similar fixed electrical installations. Collateral standard. Switches and related accessories for use in home and building electronic systems (HBES)
LST EN 50428-2005/A1-2008 Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
LST EN 50428-2005/A2-2009 Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
LST EN 50383-2010 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz)
LST CEN/TS 115-4-2020 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards
LST EN 61935-2-2011 Specification for the testing of balanced and coaxial information technology cabling -- Part 2: Cords as specified in ISO/IEC 11801 and related standards (IEC 61935-2:2010)
LST EN 50445-2008 Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
LST EN 61935-3-2010 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards (IEC 61935-3:2008, modified)

AENOR, Correlation of standard curve

UNE-EN 50428:2006 Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
UNE-EN 50428:2006/A1:2008 Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
UNE-EN 50428:2006/A2:2009 Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
UNE-EN 50383:2011 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz)
UNE-EN 50445:2008 Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)

IT-UNI, Correlation of standard curve

UNI CEN/TS 115-4-2021 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards

American Society of Mechanical Engineers (ASME), Correlation of standard curve

ASME SEC V B SE-1815-2002 Standard Test Method for Classification of Film Systems for Industrial Radiography ASTM E1815-96; DELETED

NZ-SNZ, Correlation of standard curve

AS/NZS IEC 61935.1:2012 Specification for the testing of balanced and coaxial information technology cabling Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards

Standard Association of Australia （SAA）, Correlation of standard curve

HB 18.16-1991 Guidelines for third-party certification and accreditation - Guide 16 - Code of principles on third-party certification systems and related Standards
AS/NZS 4231:1994 Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI network layer standards
AS 1289.2.3.1:1998 Methods of testing soils for engineering purposes - Soil moisture content tests - Establishment of correlation - Subsidiary method and the standard method

The American Road & Transportation Builders Association, Correlation of standard curve

AASHTO PP 111-2021 Standard Practice for Definition of Terms Related to Transverse Pavement Profiling Systems and Ground Reference Equipment

National Fire Protection Association (NFPA), Correlation of standard curve

NFPA 51-2006 Standard for the Design and Installation of OxygenFuel Gas Systems for Welding, Cutting, and Allied Processes 2007 Edition

IMO - International Maritime Organization, Correlation of standard curve

IB978E-2002 General Requirements and Performance Standards for Shipborne Radiocommunications and Navigational Equipment including Related Operational Recommendations and Guidance

ATIS - Alliance for Telecommunications Industry Solutions, Correlation of standard curve

0600328-2018 Protection of Telecommunications Links from Physical Stress and Radiation Effects and Associated Requirements for DC Power Systems (A Baseline Standard)
0600328-2007 Protection of Telecommunications Links from Physical Stress and Radiation Effects and Associated Requirements for DC Power Systems (A Baseline Standard)
T1.328-1995 Telecommunications - Protection of Telecommunications Links from Physical Stress and Radiation Effects and Associated Requirements for DC Power Systems (A Baseline Standard)

ZA-SANS, Correlation of standard curve

SANS 16949:2009 Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations

Japanese Industrial Standards Committee (JISC), Correlation of standard curve

JIS X 5307:1995 Information technology -- Telecommunications and information exchange between systems -- Elements of Management Information Related to OSI Transport Layer Standards
JIS X 5306:1994 Information technology -- Telecommunications and information exchange between systems -- Elements of management information related to OSI Network Layer standards

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Correlation of standard curve

PREN 4705-2018 Aerospace series - Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment (Edition P1)

TIA - Telecommunications Industry Association, Correlation of standard curve

TIA/EIA-102.BAEB-1-2001 Project 25 Packet Data Specification - Addendum 1 - Subnetwork Dependent Convergence Protocol (SNDCP) New Technology Standards Project - Digital Radio Technical Standards (Addendum 1 to TIA/EIA-102.BAEB)

ECIA - Electronic Components Industry Association, Correlation of standard curve

EIA-448-21-1989 Method 21 Test Standard for Electromechanical Switches: Environmental Effects of Machine Soldering Using an Infrared System