ZH
RU
ES
Melting point test
Melting point test, Total:259 items.
In the international standard classification, Melting point test involves: Linear and angular measurements, Pharmaceutics, Glass, Plastics, Environmental protection, Analytical chemistry, Edible oils and fats. Oilseeds, Products of the chemical industry, Welding, brazing and soldering, Environmental testing, Testing of metals, Organic chemicals, Lubricants, industrial oils and related products, Protection against fire, Textile fibres, Petroleum products in general, Waxes, bituminous materials and other petroleum products, Physics. Chemistry, Farming and forestry, Paints and varnishes, Fuels, Protection against dangerous goods, Adhesives, Road vehicle systems, Milk and milk products, Test conditions and procedures in general, Electrical wires and cables, Surface treatment and coating, Optoelectronics. Laser equipment, Measurement of volume, mass, density, viscosity, Electronic display devices, Raw materials for rubber and plastics, Insulating materials, Wastes, Construction materials, Electromechanical components for electronic and telecommunications equipment, Non-destructive testing, Thermodynamics and temperature measurements, Electronic tubes, Products of the textile industry, Non-textile floor coverings, Power stations in general.
Professional Standard - Machinery, Melting point test
- JB/T 6177-1992 Melting point determination apparatus
- JB/T 8630-1997 Test method of determining melting heat, melting point and crystallization heat and crystallizing point of electrical insulation materials with differential scanning calorimetric method
- JB/T 5996-1992 Roundness measurement Assessment of accuracy of three-point measuring method and the measurement instrument used
工业和信息化部, Melting point test
National Metrological Verification Regulations of the People's Republic of China, Melting point test
- JJG 701-1990 Verification Regulation of Melting-Point-Measuring Instruments with Capillary Method
- JJG 701-2008 Verification Regulation of Melting-point Measurement Instruments
- JJG 463-1996 Verification Regulation of Melting-Point-Measuring Instruments With Thermo-Micro-Method
- JJG(民航) 0088-2006 Verification Regulation of 101-5HJ Igniter Circuit Tester
PL-PKN, Melting point test
Professional Standard - Military and Civilian Products, Melting point test
- WJ 2293-1995 Verification rules for microscope temperature platform melting point tester
Indonesia Standards, Melting point test
IN-BIS, Melting point test
未注明发布机构, Melting point test
- BS 4633 & 04634:1970(2011) Method for The determination of crystallizing point Method for The determination of melting point and / or melting range
- BS ISO 8820-4:2010 Road vehicles — Fuse - links Part 4 : Fuse - links with female contacts (type A) and bolt - in contacts (type B) and their test fixtures
(U.S.) Ford Automotive Standards, Melting point test
RU-GOST R, Melting point test
- GOST 33454-2015 Testing of chemicals of environmental hazard. Determination of the melting point/melting range
- GOST R 53717-2009 Petroleum products. Test method for flash point by Tag closed cup tester
- GOST R 59683-2021 Petroleum products. Standard test methods for flash point by continuously closed cup tester
- GOST 14618.12-1978 Essential oils, aromatics and their intermediates. Methods for determination of distillation, melting and congelation temperature limits
- GOST 34238-2017 Petroleum products. Methods for determination of flash point by small scale closed cup tester
- GOST 21107.4-1975 Gas discharge devices. Ignitrons. Methods for measurement of parameters
- GOST 22091.9-1986 X-ray devices. The methods of measuring effective focus spot size
- GOST R 54279-2010 Petroleum products. Methods for determination of flash point in Pensky-Martens closed cup tester
NL-NEN, Melting point test
Korean Agency for Technology and Standards (KATS), Melting point test
American Society for Testing and Materials (ASTM), Melting point test
- ASTM D5440-93(2003) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM F766-82(2005) Standard Test Method for Melting Point of Waxes
- ASTM E324-23 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM E324-99 Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM D3828-05 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
- ASTM D93-02 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D3828-12a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
- ASTM D93-20 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D5440-93(1997) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5440-93(2009) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5440-17(2021) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5440-17 Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM F766-82(2000)e1 Standard Test Method for Melting Point of Waxes
- ASTM F766/F766M-82(2010)e1 Standard Test Method for Melting Point of Waxes
- ASTM D56-70 Standard Method Of Test For Flash Point By Tag Closed Tester
- ASTM D93-90e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
- ASTM D93-80e1 Standard Test Methods for Flash Point By Pensky-Martens Closed Tester
- ASTM D56-21 Standard Test Method for Flash Point by Tag Closed Cup Tester
- ASTM D56-21a Standard Test Method for Flash Point by Tag Closed Cup Tester
- ASTM D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester
- ASTM D1465-04 Standard Test Method for Blocking and Picking Points of Petroleum Wax
- ASTM D1465-10(2015) Standard Test Method for Blocking and Picking Points of Petroleum Wax
- ASTM D56-87 Standard Test Method for Flash Point by Tag Closed Tester
- ASTM D56-93 Standard Test Method for Flash Point by Tag Closed Tester
- ASTM D3828-16a(2021) Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
- ASTM E324-79(1989)e1 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM E324-16 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM D6450-16a(2021) Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
- ASTM D7094-17 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM D7094-17a Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM E28-67 Standard Method Of Test For Softening Point By Ring-And-Ball Apparatus
- ASTM D127-87(2004) Standard Test Method for Drop Melting Point of Petroleum Wax Including Petrolatum
- ASTM D127-63(1977) Standard Test Method for Drop Melting Point Of Petroleum Wax Including Petrolatum
- ASTM D127-19 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM D87-04 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D7236-16a Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
- ASTM D7236-16a(2021) Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
- ASTM D93-00 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D93-02a Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D93-10a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D7094-04 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM D7094-04(2009) Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
- ASTM D6450-99 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
- ASTM D6450-16a Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
- ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D6450-12e1 Standard Test Method for Flash Point by Continuously Closed Cup 40;CCCFP41; Tester
- ASTM D5399-95(2000) Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
- ASTM D5399-04(2009) Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
- ASTM C1276-94(1999) Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
- ASTM D1519-95(2009)e1 Standard Test Method for Rubber Chemicals-Melting Range
- ASTM D93-06 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D93-13 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D93-13e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D6493-99 Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
- ASTM D8174-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
- ASTM D8175-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
- ASTM F2625-10(2016) Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
- ASTM D36-06 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- ASTM E28-99(2009) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
- ASTM E1941-98 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
- ASTM E1941-04 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
- ASTM D7094-12e1 Standard Test Method for Flash Point by Modified Continuously Closed Cup 40;MCCCFP41; Tester
- ASTM D6493-05 Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
- ASTM D6493-05(2010) Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
- ASTM C1276-94(2005) Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
- ASTM F2625-10 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
- ASTM D5252-98a Standard Practice for the Operation of the Hexapod Drum Tester
- ASTM D5251-98a Standard Practice for the Operation of the Tetrapod Walker Drum Tester
- ASTM D5251-98a(2003) Standard Practice for the Operation of the Tetrapod Walker Drum Tester
- ASTM D36/D36M-14e1 Standard Test Method for Softening Point of Bitumen &40;Ring-and-Ball Apparatus&41;
- ASTM D36/D36M-14 Standard Test Method for Softening Point of Bitumen 40;Ring-and-Ball Apparatus41;
- ASTM D127-05 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM D127-08 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM D127-08(2015) Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM F2625-07 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
British Standards Institution (BSI), Melting point test
- BS 4633 and 4634:1970 Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range
- BS EN ISO 17637:2011 Non-destructive testing of welds. Visual testing of fusion-welded joints
- BS EN ISO 3679:2022 Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
- 22/30441177 DC BS EN ISO 3679. Determination of flash point Method for flash no-flash and flash point by small scale closed cup tester
- BS ISO 8820-4:2016 Road vehicles. Fuse-links. Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
- BS ISO 8820-4:2011 Road vehicles. Fuse-links. Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
- BS 2000-133:1993 Methods of test for petroleum and its products - Determination of drop melting point of wax and petrolatum
- BS EN ISO 6321:2002 Animal and vegetable fats and oils. Determination of melting point in open capillary tubes (slip point)
- BS EN ISO 6321:2021 Animal and vegetable fats and oils. Determination of melting point in open capillary tubes. Slip point
- 18/30382072 DC BS IEC 61468. Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation. Characteristics and test methods of self-powered neutron detectors
- 19/30400212 DC BS IEC 61468. Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation. Characteristics and test methods of self-powered neutron detectors
- BS EN ISO 10360-10:2016 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Laser trackers for measuring point-to-point distances
- 20/30424263 DC BS EN ISO 6321. Animal and vegetable fats and oils. Determination of melting point in open capillary tubes (slip point)
European Committee for Standardization (CEN), Melting point test
- EN ISO 17637:2011 Non-destructive testing of welds - Visual testing of fusion-welded joints
国家市场监督管理总局、中国国家标准化管理委员会, Melting point test
- GB/T 40320-2021 Measuring method for mechanical melting temperature of aluminum alloy
SG-SPRING SG, Melting point test
- SS 11 Pt.16-1986 Methods Of Sampling And Test For Oils And Fats Part 16 : Determination Of Melting Point (Slip Point)
CL-INN, Melting point test
CZ-CSN, Melting point test
- CSN 66 6409-1967 Determining the melting point of photo graphic layers
- CSN 58 8754-1994 Methods of test for fats and oils etermination of melting point by clearing
- CSN 66 6653-1981 Determination of deformation temperature, liberating temperature and melting point
- CSN ISO 6321:1994 Animal and vegetables fats and oils.Determination of melting point in open capillary tubes(slip point)
RO-ASRO, Melting point test
AASHTO - American Association of State Highway and Transportation Officials, Melting point test
- T73-1989 Standard Method of Test for Flash Point by Pensky-Martens Closed Tester
- T 53-2009 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 53-2006 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 53-1992 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 73-2003 Standard Method of Test for Flash Point by Pensky-Martens Closed Cup Tester (ASTM Designation: D 93-02a; No Replacement)
- T73-1999 Standard Method of Test for Flash Point by Pensky-Martens Closed Tester (Nineteenth Edition; Revision Per Interim Specifications - Tests and Methods - 1999)
German Institute for Standardization, Melting point test
- DIN EN ISO 3679:2023 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)
- DIN 51532:2012 Petroleum waxes - Determination of melting point (cooling curve)
- DIN 51532:2012-12 Petroleum waxes - Determination of melting point (cooling curve)
- DIN EN ISO 3679:2023-03 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022); German version EN ISO 3679:2022
- DIN EN ISO 6321:2021-09 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021); German version EN ISO 6321:2021
- DIN VDE 0472-621:1983 Testing of cables, wires and flexible cords; crystallite melting point VDE Specification
- DIN 51755:1974-03 Testing of Mineral Oils and Other Combustible Liquids; Determination of Flash Point by the Closed Tester according to Abel-Pensky
- DIN 57472-621:1983 Testing of cables, wires and flexible cords; crystallite melting point [VDE Specification]
- DIN EN 60512-16-5:2009 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008); German version EN 60512-16-5:2008
- DIN EN 60512-16-5:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008); German version EN 60512-16-5:2008 / Note: DIN IEC 6051...
VN-TCVN, Melting point test
- TCVN 4336-1986 Organic compounds.Determination of melting point
- TCVN 2693-2007 Petroleum Products.Test methods for determination of flash point by Pensky-Martens closed cup tester
- TCVN 6119-2007 Animal and vegetable fats and oils.Determination of melting point in open capillary tubes (slips point)
- TCVN 2641-2008 Animal and vegetable fats and oils.Flashpoint limit test using Pensky-Martens closed cup flash tester
HU-MSZT, Melting point test
International Organization for Standardization (ISO), Melting point test
- ISO 1218:1975 Plastics; Polyamides; Determination of "melting point"
- ISO 6244:1982 Petroleum waxes and petrolatums; Determination of drop melting point
- ISO 3841:1977 Petroleum waxes; Determination of melting point (cooling curve)
- ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
- ISO 6321:2002 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point)
- ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point
- ISO 6321:1991 Animal and vegetable fats and oils; determination of melting point in open capillary tubes (slip point)
- ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
Professional Standard - Chemical Industry, Melting point test
SE-SIS, Melting point test
- SIS SS IEC 808:1988 Complementary instrumentation for counting ratemeters — Characteristics and test methods
- SIS SS IEC 650:1981 Nuclear instrumentation - Analogue counting ratemeters - Characteristics and test methods
- SIS 02 18 10-1968 Flash point by the Abel-Pensky tester
- SIS 02 18 12-1968 Flash point by the Pensky-Martens tester
- SIS SS IEC 739:1986 Nuclear instrumentation - Digital counting ratemeters - Characteristics and test methods
- SIS 02 18 11-1968 Flash point by the Abel-Pensky tester with stirrer
- SIS SS IEC 527:1981 Nuclear instrumentation - Direct current amplifiers - Characteristics and test methods
- SIS SS IEC 773:1985 Rotating electrical machinery - Test methods and apparatus for the measurement of the operational characteristics of brushes
- SIS SEN 06 01 15-1971 Coordination ofrated values for watthour meters and associated fuses. Requirements and type-tests
- SIS SS IEC 295:1983 Nuclear instrumentation - D.C. periodmeters: characteristics and test methods
- SIS SS IEC 744:1984 Nuclear instrumentation — Safety logic assemblies of nuclear power plants — Characteristics and test methods
Association Francaise de Normalisation, Melting point test
- NF T20-051:1985 Chemical products for industrial use. Determination of melting point. Method for the determination of cristallizing point (freezing point).
- NF T60-114:1970 Petroleum products. Melting point of paraffins.
- NF T76-106:1981 ADHESIVES. DETERMINATION OF THE CONVENTIONAL MELTING POINT OF ADHESIVES HOT-MELT. ("BALL AND RING" METHOD).
- NF EN 60512-16-5:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-5 : essais mécaniques des contacts et des sorties - Essai 16e : force de rétention du calibre (contacts élastiques)
- NF T60-226:2002 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point).
- NF T60-226*NF EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point
- NF EN ISO 6321:2021 Corps gras d'origines animale et végétale - Détermination du point de fusion en tube capillaire ouvert
- NF C93-400-16-5*NF EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5 : mechanical tests on contacts and terminations - Test 16e : gauge retention force (resilient contacts)
- NF T51-049:1969 Plastics. Polyamide resins. Determination of melting point. So-called capillary tube method.
- NF T51-050:1969 Plastics. Polyamide resins. Determination of melting point. Meniscus method.
AENOR, Melting point test
- UNE 22542:1992 TESTER AND OHMMETERS FOR ELECTRIC SHOT-FIRING CIRCUITS.
- UNE 51024:1987 PETROLEUM PRODUCTS. DETERMINATION OF FLASH POINT. ABEL-PENSKY CLOSED TESTER
- UNE 51100:1996 PETROLEUM WAXES AND PETROLATUMS. DETERMINATION OF DROP MELTING POINTS.
- UNE-EN ISO 6321:2003 Animal and vegetable fats and oils. Determination of melting point in open capillary tubes (slip point). (ISO 6321:2002)
- UNE 84083:2005 Cosmetic raw materials. Determination of the melting point. Closed capillary method.
Professional Standard - Agriculture, Melting point test
- NY/T 1860.20-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 20: Melting point/melting range
- GB 617-1988 General method for determination of melting point range of chemical reagents
- NY/T 1860.20-2010 Guidance on the determination of physico-chemical properties of pesticides.Part 20:Melting point
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Melting point test
- GB/T 617-1988 Chemical reagent--General method for the determination of melting range
- GB/T 617-2006 Chemical reagent General method for the determination of melting range
- GB/T 21781-2008 Test methods for melting point and melting range of chemical products.Capillary tube method
- GB/T 2539-2023 Determination of melting point of petroleum wax by cooling curve method
- GB/T 2539-2008 Petroleum waxes. Determination of melting point. Cooling curve method
- GB/T 24892-2010 Animal and vegetable fats and oils-Determination of melting point in open capillary tubes(slip point)
- GB/T 15332-1994 Determination of the softening point of hot-melt adhesives--Ball and ring method
- GB/T 28724-2012 Determination of melting temperature for chemicals(pharmaceuticals).Differential scanning calorimetry(DSC)
Military Standard of the People's Republic of China-General Armament Department, Melting point test
- GJB 772.110-1991 Explosives Test Methods Melting Point Determination Capillary Method
AR-IRAM, Melting point test
BE-NBN, Melting point test
Professional Standard - Petroleum, Melting point test
- SY/T 7516-2010 Determination of pour point of modified crude oil.Melting method
YU-JUS, Melting point test
- JUS H.P8.096-1988 Testing of pesticides. Lindan, technical. Determination ofmelting point
- JUS H.P8.087-1988 Testing of pesticides. DDT, technical. Determination of melting point
- JUS H.P8.501-1983 Testing of pesticides. Determination for flash point by Pensky-Martens closed tester
- JUS H.P8.088-1988 Testing of pesticides. DDT, technical. Determination of melting point of separatedfp-p'- DDT
- JUS E.K8.044-1991 Anima1 and vegetable fats and oils. Determinat ion of melting point in open capillarjr tubes (sllp point)
VE-FONDONORMA, Melting point test
The American Road & Transportation Builders Association, Melting point test
- AASHTO T 53-2011 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
TH-TISI, Melting point test
- TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup
Professional Standard - Aerospace, Melting point test
- QJ 2196-1991 Test method for gas permeability coefficient of high melting point oxides
Danish Standards Foundation, Melting point test
- DS/EN ISO 6321:2002 Animal vegetable fats and oils - Determination of melting point in open capillary tubes (slip point)
- DS/EN ISO 6321:2021 Animal and vegetable fats and oils – Determination of melting point in open capillary tubes – Slip point (ISO 6321:2021)
- DS/ISO 6321:2021 Animal and vegetable fats and oils – Determination of melting point in open capillary tubes – Slip point
Lithuanian Standards Office , Melting point test
- LST ISO 6244:1997 Petroleum waxes and petrolatums. Determination of drop melting point
- LST EN ISO 6321:2003 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002)
- LST EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021)
- LST ISO 15267:2000 Animal and vegetable fats and oils. Flashpoint limit test using Pensky-Martens closed-cup flash tester (idt ISO 15267:1998)
ES-UNE, Melting point test
- UNE-EN ISO 3679:2023 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022, Corrected versión 2023-05)
- UNE-EN ISO 6321:2022 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021)
- UNE-EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (Endorsed by AENOR in February of 2009.)
Group Standards of the People's Republic of China, Melting point test
- T/QGCML 159-2021 Calibration method of helmet splash resistance molten metal splash tester
- T/SBX 026-2019 Determination of Melting Point of Liquid Crystal Monomer by Differential Scanning Calorimetry
AT-ON, Melting point test
- ONORM N 3001-1991 Animal and vegetable fats and oils — Determination of melting point in open capillary tubes (slip point)
- OENORM EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021)
IT-UNI, Melting point test
- UNI EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point
Anhui Provincial Standard of the People's Republic of China, Melting point test
- DB34/T 925-2009 Determination of Smoke Point of Vegetable Oils and Fats by Digital Smoke Point Apparatus
CH-SNV, Melting point test
- SN 214 051-1984 Testing of metallic materials; hardness fest on welds;Transverse sections of joint weldsGrundlage der vorliegenden Norm ist die Deutsche NormDIN 50163, Teil l (siehe Erl?uterungen).
- SN EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021)
American National Standards Institute （ANSI), Melting point test
- ANSI/ASTM D2538:1995 Test Method for Fusion of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer (08.02)
GOSTR, Melting point test
- GOST 18995.4-1973 Organic chemical products. Methods for determination of melting point interval
- GOST 33192-2014 Petroleum products and other liquids. Method for determination of flash point by tag closed cup tester
Japanese Industrial Standards Committee (JISC), Melting point test
- JIS K 0064:1992 Test methods for melting point and melting range of chemical products
- JIS H 8665:1994 Testing methods for spray fused coatings of self-fluxing alloys
- JIS K 6862:1984 Testing methods for melt viscosity of hot-melt adhesives
Defense Logistics Agency, Melting point test
Association of German Mechanical Engineers, Melting point test
U.S. Air Force, Melting point test
Instrument Society of America (ISA), Melting point test
- ISA RP67.04.02-2010 Methodologies for the Determination of Setpoints for Nuclear Safety-Related Instrumentation
Professional Standard - Electricity, Melting point test
- DL/T 849.2-2004 General technical specification of test instruments used for power equipments Part 2: fault locator for power cable
- DL/T 849.2-2019 General Specifications for Special Test Instruments for Power Equipment Part 2: Cable Fault Detector