pressure digestion tank

pressure digestion tank, Total:500 items.

In the international standard classification, pressure digestion tank involves: General methods of tests and analysis for food products, Kitchen equipment, Commercial vehicles, Valves, Protection against dangerous goods, Fluid storage devices, Protection against fire, Measurement of force, weight and pressure, Pumps, Materials for aerospace construction, Animal feeding stuffs, Sterilization and disinfection, Bottles. Pots. Jars, Products of non-ferrous metals, Equipment for petroleum and natural gas industries, Surface treatment and coating, Inland navigation vessels, Shipbuilding and marine structures in general, Transformers. Reactors, Wind turbine systems and other alternative sources of energy, Pipeline components and pipelines, Railway rolling stock, Fluid power systems, Vocabularies, Earthworks. Excavations. Foundation construction. Underground works, Products of the chemical industry, Occupational safety. Industrial hygiene, Electrical equipment for working in special conditions, Terminology (principles and coordination), Internal combustion engines for road vehicles, Power transmission and distribution networks, Petroleum, petroleum products and natural gas handling equipment, Heat treatment, Water quality, Lubricants, industrial oils and related products, Petroleum products in general, Environmental testing, Electrical wires and cables, Galvanic cells and batteries.

Danish Standards Foundation, pressure digestion tank

DS/EN 13805:2002 Foodstuffs - Determination of trace elements - Pressure digestion
DS/EN 13316:2003 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
DS/EN 13308:2003 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
DS/EN 16206:2012 Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)
DS/EN 14595:2005 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and Vacuum Breather Vent
DS/EN 13094/AC:2009 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
DS/EN 13094:2008 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
DS/EN 15765:2010 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion
DS 2320:2006 Fire protection - Fire extinguishers - Pressure testing, inspection and recharging
DS/EN 15764:2010 Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion
DS/EN 976-1:1998 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks
DS/EN 16277:2012 Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide)
DS/EN 15763:2010 Foodstuffs - Determination of trace elements - Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion
DS/EN 15550:2008 Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
DS/EN 15621:2012 Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES

Lithuanian Standards Office , pressure digestion tank

LST EN 13805-2002 Foodstuffs - Determination of trace elements - Pressure digestion
LST EN 13316-2003 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
LST EN 13308-2003 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
LST EN 14025-2008 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and Construction
LST EN 16206-2012 Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)
LST EN 13094-2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
LST EN 14025-2014 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
LST EN 14595-2005 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and Vacuum Breather Vent
LST EN 13094-2008 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
LST EN 13094-2008/AC-2009 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
LST EN 15765-2010 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion
LST EN 14083-2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion
LST EN 15764-2010 Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion
LST EN 976-1-2000 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks
LST EN 16277-2012 Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide)
LST EN 15763-2010 Foodstuffs - Determination of trace elements - Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion
LST EN 15550-2008 Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
LST EN 15621-2012 Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES

AENOR, pressure digestion tank

UNE-EN 13805:2015 Foodstuffs - Determination of trace elements - Pressure digestion
UNE-EN 13316:2003 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
UNE-EN 16206:2012 Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)
UNE 40019-3:1982 TEXTILE MACHINERY AND ACCESORIES. CYLINDRICAL SLIVER CANS. PART 3: PACKAGING SLIVER CANS (PRESS CANS)
UNE-EN 13308:2003 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve.
UNE-EN 15765:2010 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion
UNE-EN 14083:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion
UNE-EN 15764:2010 Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion
UNE-EN 16277:2012 Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide)
UNE-EN 15763:2010 Foodstuffs - Determination of trace elements - Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion
UNE 192011-5:2013 Procedure for the regulatory inspection. Pressure equipment. Part 5: Specific requirements for cryogenic tanks
UNE-EN 15550:2008 Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
UNE-EN 15621:2012 Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES

German Institute for Standardization, pressure digestion tank

DIN EN 13805:2014-12 Foodstuffs - Determination of trace elements - Pressure digestion; German version EN 13805:2014
DIN 14421:2017-04 Pressure gauges (manometer) for fire pumps
DIN EN 14025:2022 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German and English version prEN 14025:2022
DIN EN 14025:2022-04 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German and English version prEN 14025:2022 / Note: Date of issue 2022-03-04*Intended as replacement for DIN EN 14025 (2020-08).
DIN EN 14025:2020-08 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German version EN 14025:2018 + AC:2020 / Note: To be replaced by DIN EN 14025 (2022-04).
DIN EN 14025:2024-02 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German version EN 14025:2023
DIN EN 13316:2003-02 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; German version EN 13316:2002
DIN 14421:2001 Pressure gauges (manometer) for fire pumps
DIN 14421:2017 Pressure gauges (manometer) for fire pumps
DIN EN 16206:2012-05 Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide); German version EN 16206:2012
DIN EN 14025:2008 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and Construction; English version of DIN EN 14025:2008-08
DIN EN 14595:2005 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent; German version EN 14595:2005
DIN EN 13308:2003-02 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve; German version EN 13308:2002
DIN EN 13316:2003 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; German version EN 13316:2002
DIN EN 14025:2020 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction (includes Corrigendum :2020)
DIN 24376:1980 Name plates surface treatment; pressure feed vessels, terms
DIN 86110:2015-08 Ship service tank piping system - Filling and pressure equalizing equipment for tanks on ships - Sounding pipes
DIN EN 15550:2007 Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion; English version of DIN EN 15550:2007-12
DIN EN 13806:2002-11 Foodstuffs - Determination of trace elements - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion; German version EN 13806:2002
DIN EN 13094:2009 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction (includes Corrigendum AC:2008）; English version of DIN EN 13094:2009-01
DIN EN 14025:2014 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German version EN 14025:2013
DIN EN 14025:2018 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German version EN 14025:2018
DIN 6275:1982 Internal combustion engines for general purposes; Compressed air containers for permissible working overpressures up to 30 bar
DIN 14312:1985 Aluminium alloy cap fire hose coupling type B, for pressure and suction purposes; nominal pressure 16
DIN EN 13094:2008 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction; English version of DIN EN 13094:2008-10
DIN EN 12573-2:2000 Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks; German version EN 12573-2:2000
DIN EN 15765:2010-04 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion; German version EN 15765:2009
DIN EN 13806-1:2023-07 Foodstuffs - Determination of trace elements - Part 1: Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion; German and English version prEN 13806-1:2023 / Note: Date of issue 2023-06-09*Intended as re...
DIN V 14430:2004 Fire fighting - Positive pressure foam systems and compressed air foam systems
DIN 14381:2017 Firefighting and fire protection - Pressure valve type B PN 16 - Self-locking
DIN 14381:2017-04 Firefighting and fire protection - Pressure valve type B PN 16 - Self-locking
DIN EN 15621:2017-10 Animal feeding stuffs - Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES; German version EN 15621:2017
DIN EN 14083:2003-07 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion; German version EN 14083:2003
DIN 5580:1999 Compressed air equipment for railway vehicles - Pressure vessels made of aluminium alloys - Dimensions, designation
DIN 14311:1985 Aluminium alloy cap fire hose coupling type C, for pressure and suction purposes; nominal pressure 16
DIN EN 14025:2017 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German and English version prEN 14025:2017
DIN EN 15550:2017-10 Animal feeding stuffs - Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion; German version EN 15550:2017
DIN EN 15764:2010-04 Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion; German version EN 15764:2009
DIN EN 14627:2005-07 Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion; German version EN 14627:2005
DIN EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums; English version of DIN EN 14876:2007-04
DIN EN 15621:2017 Animal feeding stuffs - Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES
DIN 14420:2002 Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle
DIN 4862:2019-04 Testing of ceramic raw and basic materials - Acid pressure digestion of ash residues after combustion of carbon and graphite materials
DIN 86041-1:2018-11 Welding flanges - Part 1: Tanks and sea boxes, nominal pressure 10 and 16
DIN 24550-5:1992-08 Fluid power; hydraulic filters; tank top return-line filter fitting dimensions
DIN 14461-3:2020-08 Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
DIN EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks; German version EN 976-1:1997
DIN 51460-3:2016-12 Testing of petroleum products - Method for sample preparation - Part 3: Unpressurized digestion with mineral acids
DIN 86201:2020-04 Connecting fittings for international fire-extinguishing shore connection - Nominal pressure 16
DIN 14800-6:2007 Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 6: Hydraulic lifting equipment with single acting hydraulic rams
DIN EN ISO 23821:2022-12 Cosmetics - Analytical methods - Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO 23821:2022); German version EN ISO 23821:2022
DIN EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction; German version EN 13094:2015
DIN 14420:2002-11 Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle
DIN EN 976-2:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks; German version EN 976-2:1997
DIN EN 16277:2012-09 Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide); German version EN 16277:2012
DIN 85005-7:1999-11 Ships and marine technology - Graphical symbols for technical documentation - Part 7: Pressure tanks
DIN EN ISO 11734:1998 Water quality - Evaluation of the "ultimate" anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production (ISO 11734:1995); German version EN ISO 11734:1998
DIN EN 286-1/A2:2005 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; English version of DIN EN 286-1:1998/A2:2005
DIN EN 15763:2010-04 Foodstuffs - Determination of trace elements - Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion; German version EN 15763:2009
DIN EN 13806-2:2023-07 Foodstuffs - Determination of trace elements - Part 2: Determination of total mercury in foodstuffs by atomic fluorescence spectrometry (AFS) - cold vapour technique after pressure digestion; German and English version prEN 13806-2:2023 / Note: Date of...
DIN 14751-5:2004 Hydraulically operated rescue tools for fire brigade use - Part 5: Single acting hydraulic rescue tools
DIN 14313:1989 Aluminium alloy cap fire hose coupling type A for pressure and suction purposes; nominale pressure 16
DIN 14800-6:2004 Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 6: Hydraulic lifting equipment with single acting hydraulic rams
DIN 14345:2012 Firefighting equipment - Distributor C-DCD, B-CBC and BB-CBC, nominal pressure 16
DIN 86202:1989 Delivery fire hose coupling type C, PN 16; made of brass, for use on ships
DIN 86203:1989 Delivery fire hose coupling type B, PN 16; made of brass, for use on ships
DIN EN 13805:2002 Foodstuffs - Determination of trace elements - Pressure digestion; German version EN 13805:2002
DIN EN 13805:2014 Foodstuffs - Determination of trace elements - Pressure digestion; German version EN 13805:2014
DIN EN 13806-2:2023 Foodstuffs - Determination of trace elements - Part 2: Determination of total mercury in foodstuffs by atomic fluorescence spectrometry (AFS) - cold vapour technique after pressure digestion; German and English version prEN 13806-2:2023
DIN EN ISO 23821:2022 Cosmetics - Analytical methods - Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO 23821:2022)
DIN 11699:2020-10 Determination of barium, nickel and other elements in cosmetics and tattoo products by atomic emission spectrometry with inductively coupled plasma (ICP-OES) after pressure digestion
DIN EN 976-1:1997-09 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks; German version EN 976-1:1997
DIN 24550-4:1992-09 Fluid power; hydraulic filter elements for tank top return-line filters; envelope dimensions

SCC, pressure digestion tank

NS-EN 13805:2014 Foodstuffs — Determination of trace elements — Pressure digestion
DANSK DS/EN 13805:2014 Foodstuffs – Determination of trace elements – Pressure digestion
DIN 14421 E:2016 Draft Document - Pressure gauges (manometer) for fire pumps
NS-EN 14025:2018 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
DANSK DS/EN 14025:2018 Tanks for the transport of dangerous goods – Metallic pressure tanks – Design and construction
NS-EN 14025:2013 Tanks for the transport of dangerous goods — Metallic pressure tanks — Design and construction
ULC Subject C393-1974 Indicating Pressure Gauges for Fire Protection Service
DIN EN 14025 E:2017 Draft Document - Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German and English version prEN 14025:2017
DIN 14381 E:2016 Draft Document - Firefighting and fire protection - Pressure valve type B PN 16 - Self-locking
DIN EN 14595 E:2014 Draft Document - Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather device; German version prEN 14595:2014
NS-EN 13094:2015 Tanks for the transport of dangerous goods — Metallic tanks with a working pressure not exceeding 0,5 bar — Design and construction
DIN 86110 E:2014 Draft Document - Ship service tank piping system - Filling and pressure equalizing equipment for tanks on ships - Sounding pipes
NS-EN 15621:2017 Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES
AENOR UNE-EN 15621:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulfur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES
NS-EN 15550:2017 Animal feeding stuffs: Methods of sampling and analysis — Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
AENOR UNE-EN 15550:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
DIN EN 15621 E:2016 Draft Document - Animal feeding stuffs - Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES; German and English ve...
DIN 4862:2019 Testing of ceramic raw and basic materials - Acid pressure digestion of ash residues after combustion of carbon and graphite materials
DIN 86041-1:2018 Welding flanges - Part 1: Tanks and sea boxes, nominal pressure 10 and 16
DIN 14461-3:2020 Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
DIN EN 15550 E:2016 Draft Document - Animal feeding stuffs - Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion; German and English version FprEN 15550:2016
DIN EN 14025/A1 E:2020 Draft Document - Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German and English version EN 14025:2018/prA1:2020
DIN 86201:2020 Connecting fittings for international fire-extinguishing shore connection - Nominal pressure 16
DIN 14461-3 E:2016 Draft Document - Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
DIN 86041-1 E:2018 Draft Document - Welding flanges - Part 1: Tanks and sea boxes, nominal pressure 10 and 16
AENOR UNE 192011-4:2018 Procedure for regulatory inspection. Pressure equipment. Part 4: Specific requirements for cryogenic tanks.
DIN 51460-3 E:2014 Draft Document - Testing of petroleum products - Method for sample preparation - Part 3: Unpressurized digestion with mineral acids
DIN 11699:2020 Determination of barium, nickel and other elements in cosmetics and tattoo products by atomic emission spectrometry with inductively coupled plasma (ICP-OES) after pressure digestion
CAN/CSA/ANSI LNG 3.5-2018 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 5: Tank pressure gauge
CSA ANSI LNG 3.5-2018 Road vehicles - Liquefied natural gas (LNG) fuel system components - Part 5: Tank pressure gauge
CSA/ANSI LNG 3.5-2022 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 5: Tank pressure gauge

Korean Agency for Technology and Standards (KATS), pressure digestion tank

KS G 3602-2019 Domestic pressure pans and pressure pots
KS V ISO 3935-2005(2020) Inland navigation－Fire-fighting water system－Pressures
KS V ISO 3935-2020 Inland navigation－Fire-fighting water system－Pressures
KS V ISO 3935:2005 Inland navigation-Fire-fighting water system-Pressures
KS M ISO 11223-2014(2019) Petroleum and liquid petroleum products — Direct static measurements — Measurement of content of vertical storage tanks by hydrostatic tank gauging
KS M ISO 18132-3-2012(2017) Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels－General requirements for automatic tank gauges－ Part 3：Automatic tank gauges for liquefied petroleum and chemical gases on boar

US-FCR, pressure digestion tank

FCR COE CW 05550-1983 WELDED POWER PENSTOCKS (AND SURGE TANKS)
FCR COE CE 1406-1963 WELDED POWER PENSTOCKS AND SURGE TANKS
FCR COE CE 1406 AMENDMENT 1-1966 WELDED POWER PENSTOCKS AND SURGE TANKS

RO-ASRO, pressure digestion tank

STAS R 9316-1973 Steel tanks SPHERIGAL PRESSURE TANKS Design rules
STAS 11089-1978 TANKS FOR UNDER PRESSURE DISTRIBUTION Glosasry of terms
STAS 3589/3-1986 INDICATING PRESSURE GAU- GES, VACUUM GAUGES AND PRE- SURE VACUUM GAUGES WITH ELASTIC .ELEMENT Dials, scales, graphical symbols
STAS 10827-1987 METALLIC TANKS UNDER PRESSURE FOR BUILDING INSTALLATIONS Main dimensions

American Petroleum Institute (API), pressure digestion tank

API RP 2021-2001(2020) Management of Atmospheric Storage Tank Fires

Institute of Electrical and Electronics Engineers (IEEE), pressure digestion tank

IEEE Std C57.156-2016 IEEE Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
IEEE PC57.156/D4.1, September 2015 IEEE Draft Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
IEEE PC57.156/D4.3, April 2016 IEEE Approved Draft Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
IEEE PC57.156/D4, February 2015 IEEE Approved Draft Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
IEEE Std 1407-1998 IEEE Guide for Accelerated Aging Tests for Medium-Voltage Extruded Electric Power Cables Using Water-Filled Tanks
IEEE STD 1407-2007 IEEE Guide for Accelerated Aging Tests for Medium-Voltage (5 kV-35 kV) Extruded Electric Power Cables Using Water-Filled Tanks
IEEE Std 1407 -2007 IEEE Guide for Accelerated Aging Tests for Medium-Voltage (5 kV-35 kV) Extruded Electric Power Cables Using Water-Filled Tanks - Redline
IEEE 1407-2007 Guide for Accelerated Aging Tests for Medium-Voltage (5 kV?5 kV) Extruded Electric Power Cables Using Water-Filled Tanks

FI-SFS, pressure digestion tank

SFS 3066-1974 Metal packaging. pressure tank
SFS 2862-1984 Connection dimensions of pressure vessels. Cans and tubes. external pressure
SFS 3344 E-1982 In case of interpretation disputes the Finnish version applies. Date of translation 1985-11-15
SFS 3334-1977 Inspection of pressure vessels. Inspection of spray pressure tank
SFS 3340-1977 Portable gas tank. Test pressure, injection pressure, injection scale and size limits
SFS 5334-1987 High pressure gas tank. Vent valve and connection C3 (non-flammable), maximum filling pressure 300 bar
SFS 5333-1987 High pressure gas tank. Stem and bottle neck straight thread for breathing gas, maximum filling pressure 300 bar

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., pressure digestion tank

IEEE PC57.156/D4.3-2016 Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
IEEE C57.156-2016 Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors

European Committee for Standardization (CEN), pressure digestion tank

CEN EN 13316-2002 Tanks for transport of dangerous goods Service equipment for tanks Pressure balanced footvalve
CEN EN 13308-2002 Tanks for transport of dangerous goods Service equipment for tanks Non pressure balanced footvalve
prEN 14025 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
EN 14025:2023 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
EN 14025:2008 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and Construction
EN 14025:2003 Tanks for the transport of dangerous goods Metallic pressure tanks Design and construction Incorporating corrigendum March 2005
EN 14025:2013 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
EN 14025:2018 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
EN 14595:2016 Tanks for transport of dangerous goods - Service equipment - Breather device
EN 14595:2005 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and Vacuum Breather Vent
EN 13316:2002 Tanks for transporting dangerous goods - Service for tanks - Pressure balanced footvalve
EN 15550:2007 Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
EN 15550:2017 Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
EN 13308:2002 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
EN 12573-2:2000 Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks
EN 14025:2018/AC:2020 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
EN 13094:2004 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
EN 12573-1:2000 Welded static non-pressurised thermoplastic tanks - Part 1: General principles
EN 12573-3:2000 Welded static non-pressurised thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks
EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
EN ISO 23821:2022 Cosmetics - Analytical methods - Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO 23821:2022)
EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks
EN 12493:2013 LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture (Incorporates Amendment A2: 2018)
EN 976-2:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks
EN ISO 23088:2020 Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1000 l (ISO 23088:2020)
EN 13094:2008 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction Incorporating corrigenda November 2008 and November 2009

未注明发布机构, pressure digestion tank

DIN 14421 E:2016-05 Pressure gauges (manometer) for fire pumps
DIN EN 14025 E:2011-12 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
DIN 14381 E:2016-05 Firefighting and fire protection - Pressure valve type B PN 16 - Self-locking
DIN EN 13094 E:2019-07 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
DIN EN 13094 E:2013-04 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
DIN EN 13805 E:2013-05 Foodstuffs - Determination of trace elements - Pressure digestion
DIN 4862 E:2018-10 Testing of ceramic raw and basic materials - Acid pressure digestion of ash residues after combustion of carbon and graphite materials
DIN 86041-1 E:2018-01 Welding flanges - Part 1: Tanks and sea boxes, nominal pressure 10 and 16
DIN 14461-3 E:2002-05 Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
DIN 14461-3 E:2016-01 Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
DIN 14461-3 E:2005-04 Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
DIN 14461-3:1996 Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
DIN EN 15550 E:2016-11 Animal feeding stuffs - Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
DIN EN 15621 E:2016-11 Animal feeding stuffs - Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES
DIN 11699 E:2019-09 Determination of barium, nickel and other elements in cosmetics and tattoo products by atomic emission spectrometry with inductively coupled plasma (ICP-OES) after pressure digestion

IT-UNI, pressure digestion tank

UNI 3167-1951 Railway tank car with fixed metal tank. For pressurized and unpressurized liquids
UNI 4003-1958 Railway tank cars with fixed metal tanks for unpressurized liquids. tank diaphragm
UNI 3168-1958 Railway tank car with fixed metal tank. for pressure-free liquids
UNI 3989-1958 Railway tank cars with fixed metal tanks for unpressurized liquids. tank car chamber
UNI 5794-1966 Railway tank cars with fixed metal tanks for unpressurized liquids. Curved tank bottom
UNI 4002-1958 Railway tank cars with fixed metal tanks for unpressurized liquids. feasible
UNI 4114-1958 Railway tank cars with fixed metal tanks for unpressurized liquids. With insert slot*
UNI 4231-1959 Railway tank cars with fixed metal tanks for unpressurized liquids. axle guard
UNI 4230-1959 Railway tank cars with fixed metal tanks for unpressurized liquids. Emissions intermediate group
UNI 3877-1957 Railway tank cars with fixed metal tanks for unpressurized liquids. Transverse and longitudinal grooves*
UNI 3878-1957 Railway tank cars with fixed metal tanks for unpressurized liquids. Transverse and longitudinal grooves*
UNI 3990-1958 Railway tank cars with fixed metal tanks for unpressurized liquids. Free air outlet riser
UNI 4004-1958 Railway tank cars with fixed metal tanks for unpressurized liquids. Air coupling and its plug inside the tank
UNI 4001-1958 Railway tank cars with fixed metal tanks for unpressurized liquids. It is possible to raise the small gate
UNI 6727-1970 Railway tank cars with fixed metal tanks for unpressurized liquids. The closing device and cover of the tank car chamber need to undergo a 1.5 or 3-4kgf/cm2 hydraulic test
UNI 4112-1958 Railway tank cars with fixed metal tanks for unpressurized liquids. The frame is 7000mm. With embedded slot
UNI 4113-1958 Railway tank cars with fixed metal tanks for unpressurized liquids. The frame is 7760mm. With embedded slot
UNI 4150-1959 Railways use tank cars with fixed metal tanks. For use with pressureless liquids. Drain switch and its plug
UNI 4402-1960 Industrial pressure reducer for canned compressed gas, melted gas and liquefied gas. Concentric scale pressure gauge
UNI 4502-1960 Railway tank cars with fixed metal tanks for unpressurized liquids. Pipe openings and components for steam heating coils
UNI ISO 20145:2020 Pneumatic fluid power -- Test methods for measuring acoustic emission pressure levels of exhaust silencers

Association Francaise de Normalisation, pressure digestion tank

NF F37-012:1989 Tank wagons for the carriage of liquefied or under pressure dissolved gases. Identity and loading plate.
NF M88-072:1983 Transport and materials handling. Road tankers for non-refrigerated liquefied and dissolved gas under pressure. Floor filling and draining devices.
NF M88-172*NF EN 14025:2018 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
NF EN 14025:2018 Tanks intended for the transport of dangerous materials - Pressurized metal tanks - Design and manufacturing
NF M88-172:2008 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction.
NF M88-172:2013 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
NF M88-131:2003 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve.
NF F37-034:1985 Railway rolling stock-tank wagons for liquefied gases or dissolved under pressure gases of the class 2 of the R.I.D and the R.T.M.D. Bottom filling and emptying devices to a maximal allowed working pressure of 40 bar.
NF M88-136:2005 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum Breather vent.
NF EN 13308:2003 Tanks intended for the transport of dangerous materials - Service equipment for tanks - Non-compensated pressure bottom valve
NF EN 15765:2010 Food products - Determination of trace elements - Determination of tin by high frequency induced plasma mass spectrometry (ICP-MS) after digestion under pressure
NF F37-035:1977 RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS FOR GASES LIQUIFIED OR DISSOLVED UNDER PRESSURE (CLASS 2 OF THE R.I.D.). POSITIONING OF BOTTOM FILLING AND EMPTYING DEVICES.
NF M88-080:1984 ROAD TANKER VEHICLES. METALLIC TANKERS FOR LIQUID CHEMICAL PRODUCTS. DEVICES EFFECTING DISCHARGE BY MEANS OF PRESSURE : PLUNGER TUBE,AIR OFF-TAKE.
NF M87-209:2007 Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems.
NF EN 14384/CN:2018 Pressure fire hydrants - National supplement to NF EN 14384:2006
NF V18-214*NF EN 15550:2017 Animal feeding stuffs : methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
NF EN 14627:2005 Food products - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (SAAGH) after pressure digestion
NF EN 16206:2012 Animal feed - Determination of arsenic by hydride generation atomic absorption spectrometry (SAAGH) after digestion under pressure by microwaves (digestion with 65% nitric acid and 30% hydrogen peroxide )
NF EN 13805:2014 Produits alimentaires - Dosage des éléments traces - Digestion sous pression
NF EN 14083:2003 Produits alimentaires - Dosage des éléments traces - Détermination du plomb, du cadmium, du chrome et du molybdène par spectrométrie d'absorption atomique en four graphite après digestion sous pression
NF H44-021:1991 Aerosol generators. Measurement of the internal pressure of filled cans.
NF EN ISO 23821:2022 Cosmetics - Methods of analysis - Determination of traces of mercury in cosmetics using the cold vapor atomic absorption spectrometry (AAS) technique after digestion under pressure
NF M88-076:1974 ROAD TANKERS. ROAD TANKERS CONTAINING LIQUEFIED CHLORINE AND SULPHUR DIOXYDE. DEVICES FOR FILLING AND EMPTYING AT THE TOP,FOR A MAXIMUM SERVICE PRESSURE OF 14.5 BAR.
NF E29-784*NF EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
NF S61-112/A1:1977 Fire fighting equipment . Discharge flexible hoses - 25 - 36,5 - 45- 70 - 110.
NF S61-112:1975 Fire fighting equipment . Discharge flexible hoses - 25 - 36,5 - 45 - 70 - 110.
NF M88-121:1993 Tanks for transprot of liquid dangerous goods with design pressure not exceeding 50 kpa. Single unloading valves
NF EN 16277:2012 Animal feed - Determination of mercury by cold vapor atomic absorption spectrometry (SAAVF) after digestion under pressure by microwave (extraction with 65% nitric acid and 30% hydrogen peroxide)
NF F37-013:1980 Railway transport equipment. Tank wagons sulphuric acid type. 50 and 80 mm diameter pressure discharge dome cover.
NF EN 12493:2020 Équipements pour GPL et leurs accessoires - Réservoirs sous pression en acier soudés des camions - Conception et construction
NF ISO 20145:2020 Pneumatic transmissions - Test method for measuring the acoustic emission pressure level of exhaust silencers
NF M88-555-1*NF EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 1 : requirements and test methods for single wall tanks.
NF S63-120:1985 Rescue and fire figthing service vehicles. Low and medium pressure portable or mobile motor-drive pump.
NF M88-121:2013 Tanks for transport of dangerous liquid goods with design pressure not exceeding 50 kPa - Single unloading valves
NF EN 15764:2010 Food products - Determination of trace elements - Determination of tin by flame atomic absorption spectrometry (SAAF) and graphite furnace atomic absorption spectrometry (SAAFG) after digestion under pressure
NF M88-555-2*NF EN 976-2:1997 Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 2 : transport, handling, storage and installation of single wall tanks.
NF F37-100-3:2003 Railway applications - Tank wagons - Part 3 : bottom filling and emptying devices for gases liquefied under pressure.
NF EN 14570:2014 Équipements et accessoires GPL - Équipement des réservoirs sous pression GPL aériens et enterrés

Group Standards of the People's Republic of China, pressure digestion tank

T/ZZB 0584-2018 Simple pressure vessels Air tank
T/ZZB 2887-2022 Fire resistant vacuum pressure breathing valve for petrol storage tank
T/STSI 35-2022 Technical specification for pressure adjustable aboveground fire hydrants
T/SHFIA 000007-2019 Technical specification for fire water supply pipeline pressure monitoring system
T/CSEE 0313-2022 Fire protection design guidelines for offshore wind turbines and booster stations

Taiwan Provincial Standard of the People's Republic of China, pressure digestion tank

CNS 9799-2001 Stress and fatigue analyses for pressure vessels

API - American Petroleum Institute, pressure digestion tank

API STD 1201-1957 CALIBRATING TANK-CAR TANKS and MEASURING@ SAMPLING@ AND CALCULATING TANK-CAR QUANTITIES (NONPRESSURE-TYPE TANK CARS)
API STD 1202-1960 MEASURING@ SAMPLING@ AND CALCULATING TANK CAR QUANTITIES AND CALIBRATING TANK CAR TANKS (PRESSURE-TYPE TANK CARS) (First Edition)
API CODE 1202-1951 CODE FOR PRESSURE TANK CAR QUANTITIES or CODE FOR CALIBRATING TANK CAR TANKS and for MEASURING@ SAMPLING AND CALCULATING TANK CAR QUANTITIES (PRESSTIRE TYPE)
API BULL 2521-1966 USE OF PRESSURE-VACUUM VENT VALVES FOR ATMOSPHERIC PRESSURE TANKS TO REDUCE EVAPORATION LOSS
API CODE 1201-1948 CODE FOR TANK CAR QUANTITIES OR CODE FOR CALIBRATING TANK CAR TANKS AND FOR MEASURING@ SAMPLING AND CALCULATING TANK CAR QUANTITIES (NON-PRESSUE TYPE)
API PUBL 910-1997 Digest of State Boiler@ Pressure Vessel@ Piping and Aboveground Storage Tank Rules and Regulations (Eighth Edition)

YU-JUS, pressure digestion tank

JUS L.D2.500-1989 Pressure gauges for fire pumps
JUS L.D2.501-1989 Pressure gauges for fire pumps
JUS M.B6.726-1985 Tube fittings andunions with indenting ferrule. Pressuregaugeconnectingnipple. Shape and dimensions

PL-PKN, pressure digestion tank

PN A86729-1970 Canned fish Determination of the underpressure
PN M74091-1989 Industrial valves Aboveground fire hydrants for nominal pressure 1 MPa
PN M74092-1989 Industrial valves Underground fire hydrants for nominal pressure 1 MPa

ES-UNE, pressure digestion tank

UNE-EN 14025:2019/AC:2020 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
UNE-EN 14025:2019 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
UNE-EN 15621:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES
UNE-EN 15550:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
UNE-EN ISO 23821:2023 Cosmetics - Analytical methods - Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO 23821:2022)
UNE 192011-4:2018 Procedure for the regulatory inspection. Pressure equipment. Part 4: Specific requirements for cryogenic tanks
UNE-EN 976-1:1999 ERRATUM UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). HORIZONTAL CYLINDRICAL TANKS FOR THE NON-PRESSURE STORAGE OF LIQUID PETROLEUM BASED FUELS. PART 1: REQUIREMENTS AND TEST METHODS FOR SINGLE WALL TANKS.
UNE-EN 976-1:1998 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks

British Standards Institution (BSI), pressure digestion tank

BS EN 14025:2013+A1:2016 Tanks for the transport of dangerous goods — Metallic pressure tanks — Design and construction
BS EN 14025:2013 Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction
BS EN 14025:2018 Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction
BS EN 14025:2018(2020) Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction
BS EN 14025:2008 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and Construction
BS EN 14595:2005 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent
BS EN 14025:2023 Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction
BS EN 286-1:1998+A2:2005 Simple unfired pressure vessels designed to contain air or nitrogen - Pressure vessels for general purposes
BS EN 13316:2002 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
22/30439620 DC BS EN 14025. Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction
BS EN 15550:2007 Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
BS EN 13308:2002 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
BS EN 13094:2015 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
BS EN 13094:2004 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
BS EN 13094:2008 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
BS EN 13094:2020+A1:2022 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
BS EN 15550:2017 Animal feeding stuffs: Methods of sampling and analysis. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
BS EN 15621:2017 Animal feeding stuffs: Methods of sampling and analysis. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES
BS EN ISO 23251+A1:2006 Petroleum, petrochemical and natural gas industries. Pressure-relieving and depressuring systems
BS EN ISO 23251:2007+A1:2008 Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems
BS ISO 23251:2006 Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems
BS EN ISO 23251:2020 Petroleum, petrochemical and natural gas industries. Pressure-relieving and depressuring systems
BS EN ISO 23821:2022 Cosmetics. Analytical methods. Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion
BS EN 12561-3:2003 Railway applications - Tank wagons - Bottom filling and emptying devices for gases liquefied under pressure
BS EN 12561-3:2002 Railway applications - Tank wagons - Bottom filling and emptying devices for gases liquefied under pressure
BS EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Requirements and test methods for single wall tanks
BS EN 12561-3:2011 Railway applications. Tank wagons. Bottom filling and emptying devices for gases liquefied under pressure
BS EN 12561-3:2011(2014) Railway applications. Tank wagons. Bottom filling and emptying devices for gases liquefied under pressure
BS ISO 12614-5:2021 Road vehicles. Liquefied natural gas (LNG) fuel system components. Tank pressure gauge
23/30475967 DC BS EN 13806-1. Foodstuffs. Determination of trace elements. Part 1. Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion
BS EN 976-2:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Transport, handling, storage and installation of single wall tanks
BS EN 12094-10:2003 Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for pressure gauges and pressure switches
21/30393741 DC BS EN ISO 23821. Cosmetics. Analytical methods. Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion
BS EN 12493:2013 LPG equipment and accessories. Welded steel pressure vessels for LPG road tankers. Design and manufacture
BS EN 12493:2020 LPG equipment and accessories. Welded steel pressure vessels for LPG road tankers. Design and manufacture
BS EN 12493:2013+A2:2018 LPG equipment and accessories. Welded steel pressure vessels for LPG road tankers. Design and manufacture
BS EN 13160-5:2016 Leak detection systems. Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
22/30456361 DC Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers
BS ISO 20145:2019 Pneumatic fluid power. Test methods for measuring acoustic emission pressure levels of exhaust silencers
BS ISO 12614-13:2021 Road vehicles. Liquefied natural gas (LNG) fuel system components. Tank pressure control regulator

BR-ABNT, pressure digestion tank

ABNT EB-184-1964 Pressure circulation sterilizer

WRC - Welding Research Council, pressure digestion tank

BULLETIN 119-1967 INTERPRETIVE REPORT ON PRESSURE VESSEL HEADS; INTERPRETATIONS OF EXPERIMENTAL DATA ON PRESSURE VESSEL HEADS CONVEX TO PRESSURE
BULLETIN 69-1961 THE EFFECTS OF INTERNAL PRESSURE ON THIN-SHELL PRESSURE VESSEL HEADS WRINKLING OF A LARGE THIN CODE HEAD UNDER INTERNAL PRESSURE BIAXIAL STRESS CRITERIA FOR LARGE LOW-PRESSURE TANKS
BULLETIN 246-1979 INTERPRETIVE REPORT ON DYNAMIC ANALYSIS OF PRESSURE COMPONENTS
BULLETIN 90-1963 A CRITICAL STUDY OF THE SOLUTIONS OF THE ASYMMETRIC BENDING OF SPHERICAL SHELLS SOLUTIONS FOR THE STRESSES AT NOZZLES IN PRESSURE VESSELS STRESS CONCENTRATION FACTORS FOR THE STRESSES AT NOZZLE INTERS
BULLETIN 66-1961 INTERPRETIVE REPORT ON OPERATING CONDITIONS FOR NUCLEAR PRESSURE VESSELS
BULLETIN 303-1985 INTERPRETIVE REPORT ON DYNAMIC ANALYSIS OF PRESSURE COMPONENTS (THIRD EDITION)
BULLETIN 336-1988 INTERPRETIVE REPORT ON DYNAMIC ANALYSIS OF PRESSURE COMPONENTS (FOURTH EDITION)
BULLETIN 269-1981 INTERPRETIVE REPORT ON DYNAMIC ANALYSIS OF PRESSURE COMPONENTS (SECOND EDITION)
BULLETIN 101-1964 PVRC INTERPRETIVE REPORT OF PRESSURE VESSEL RESEARCH@ SECTION 2 – MATERIALS CONSIDERATION
BULLETIN 95-1964 PVRC INTERPRETIVE REPORT ON PRESSURE VESSEL RESEARCH@ SECTION 1 – DESIGN CONSIDERATION

National Aeronautics and Space Administration (NASA), pressure digestion tank

NASA UFGS-43 41 13.19-2008 FIBERGLASS GAS AND LIQUID PRESSURE VESSELS
NASA NACA-RM-A50E02-1950 Pressure-distribution and ram-recovery characteristics of NACA submerged inlets at high subsonic speeds

IN-BIS, pressure digestion tank

IS 13976-1994 Method of end blow- off pressure test for composite cans
IS 10526-1983 Pressure specifications for fire-fighting water systems of inland river vessels
IS 4049 Pt.1-1988 Specification for formed ends of tanks and pressure vessels based on outer diameter Part 1

Society of Automotive Engineers (SAE), pressure digestion tank

SAE AMS4456-2012 Aluminum Alloy, Hand Forgings 8.0Zn 1.0Cu 1.6Mg 0.12Zr (7037-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged
SAE AMS4332-2005 Aluminum Alloy, Extruded Profiles (73490T76511) 8.1Zn 1.7Cu 2.2Mg 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4165H-2003 Aluminum Alloy, Extrusions 4.4Cu 1.5Mg 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE AMS4404A-2008 Aluminum Alloy, Extruded Profiles (6056-T4511) 1.0Si 0.90Mg 8.80Cu 0.60Mn 0.40Zn Solution Heath Treated and Stress-Relieved by Stretching
SAE AMS4415A-2008 Aluminum Alloy Extrusions 8.9Zn 2.2Cu 2.2Mg 0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged
SAE AMS4342E-2007 Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged UNS A97050
SAE AMS4172F-2013 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4511 or T4510) Solution Heat Treated and Stress Relieved by Stretching
SAE AMS4173F-2013 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.30Cu 0.20Cr (6061-T6511 pr T6510) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
SAE AMS3532A-1991 ETHYLENE TETRAFLUOROETHYLENE SHEET, MOLDED Stress-Relieved
SAE AMS3532-1995 ETHYLENE TETRAFLUOROETHYLENE SHEET, MOLDED Stress-Relieved
SAE AMS4168J-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened
SAE AMS4173E-2003 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.30Cu 0.20Cr (6061-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
SAE AMS4169K-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated
SAE AMS4326-2004 Aluminum Alloy, 2013, Extruded Bar, Rod, and Profiles 1.0 Mg - 0.80 Si - 1.8 Cu - 0.20 Cr (2013 -T6511) Solution Heat Treated, Stress-Relieved by Stretching, and Aged UNS A92013
SAE AMS4944H-2010 Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al 2.5V Cold Worked, Stress Relieved
SAE AMS4944J-2011 Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al 2.5V Cold Worked, Stress Relieved
SAE AMS4944K-2014 Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved
SAE AMS4147-1968 ALUMINUM ALLOY FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T7352) Stress Relief Compressed
SAE AMS4944F-2001 Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al 2.5V Cold Worked, Stress Relieved
SAE AMS4944D-1991 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3.0Al - 2.5V Cold Worked, Stress Relieved
SAE AMS4944M-2020 Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved
SAE AMS3659E-2010 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, Sintered and Stress-Relieved
SAE AMS4221D-2011 Aluminum Alloy, Plate 4.4Cu 1.5Mg 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
SAE AMS3659C-1998 Polytetrafluoroethylene Extrusions Premium Strength, Sintered and Stress-Relieved

RU-GOST R, pressure digestion tank

GOST 21805-1994 Pressure regulators for liquefied hygrocarbon gases for pressure to 1,6 MPa. General specifications
GOST 21805-1983 Pressure requlators for liquated gas of Py 1,6 MPa. Specifications
GOST 21804-1994 Shut-off devices for cylinders with liquefied hydrocarbon gases for pressure to 1,6 MPa. General specifications
GOST R ISO 3935-2005 Shipbuilding. Inland navigation. Fire-fighting water system. Pressures
GOST R 51049-2008 Fire equipment. Pressure fire hoses. General technical requirements. Test methods
GOST R 51049-1997 Fire engineering. Fire pressure hoses. General technical requirements. Test methods

GSO, pressure digestion tank

GSO EN 13308:2023 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
BH GSO EN 13308:2023 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
GSO EN 13316:2023 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
BH GSO EN 13316:2023 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
OS GSO ISO 3935:2013 Shipbuilding -- Inland navigation -- Fire-fighting water system -- Pressures
BH GSO ISO 3935:2016 Shipbuilding -- Inland navigation -- Fire-fighting water system -- Pressures
GSO 215:1994 INDUSTRIAL SAFETY AND HEALTH REGULATIONS - EQUIPMENT – TANKS, PRESSURE VESSELS, BOILERS AND COMPRESSED GAS EQUIPMENT
OS GSO 215:1994 INDUSTRIAL SAFETY AND HEALTH REGULATIONS - EQUIPMENT – TANKS, PRESSURE VESSELS, BOILERS AND COMPRESSED GAS EQUIPMENT

Military Standards (MIL-STD), pressure digestion tank

DOD A-A-54689-1992 STERILIZER, SURGICAL DRESSING (PRESSURE)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pressure digestion tank

GB/T 4546-1998 Glass containers--Internal pressure resistance--Method of test
GB/T 21596-2008 Dangerous goods.Pressure test method for portable tank
GB/T 30040.2-2013 Leak detection systems.Part 2:Pressure and vacuum systems
GB/T 22052-2008 Test method for vapor pressure-temperature relationship and initial decompostition temperature of liquids by isoteniscope

Professional Standard - Agriculture, pressure digestion tank

GB 4546-1998 Test method for internal pressure resistance of glass bottles and jars
422药典化学药和生物制品卷-2010 Chapter 6 Medications for Digestive System Section 3 Drugs for Gastrointestinal Motility 1. Antispasmodic drug Belladonna
421药典化学药和生物制品卷-2010 Chapter 6 Drugs for Digestive System Section 3 Drugs for Gastrointestinal Motility 1. Antispasmodic Drug Atropine Sulfate
424药典化学药和生物制品卷-2010 Chapter 6 Medications for Digestive System Section 3 Drugs for Gastrointestinal Motility 1. Antispasmodic Drug Scopolamine Butylbromide

Professional Standard - Petroleum, pressure digestion tank

SYJ 4010-1986 Specifications for construction and acceptance of pressure filter tanks
SY/T 6261-1996 Interpretation and Analysis Method of Pressure Drop Data of Water Injection Well

SE-SIS, pressure digestion tank

SIS SS 24 82 26-1990 Water hose for fire fighting — Non-collapsible pressure hose
SIS SMS 1161-1969 Fire fighting equipment. Fire hydrant head 63 with coupling part 63 or pressure hose U
SIS SMS 2495-1969 Fire fighting equipment. Hose coupling 110 for pressure hose
SIS SMS 1176-1969 Fire fighting equipment. Hose coupling 32 for pressure hose
SIS SMS 1150-1969 Fire fighting equipment. Hose coupling 63 for pressure hose
SIS SMS 1175-1969 Fire fighting equipment. Coupling part 63 for pressure hose. Cover
SIS SMS 1151-1969 Fire fighting equipment. Hose coupling part 63 for pressure hose
SIS SMS 2497-1969 Fire fighting equipment. Hose coupling 110 for pressure hose. Neck
SIS SMS 2498-1969 Fire fighting equipment. Hose coupling 110 for pressure hose. Washer
SIS SMS 2499-1969 Fire fighting equipment. Hose coupling 110 for pressure hose. Neck ring
SIS SMS 1179-1969 Fire fighting equipment. Coupling part 32 jor pressure hose nternally threaded
SIS SMS 1180-1969 Fire fighting equipment. Coupling part 32 for pressure hose xternally threaded
SIS SMS 1157-1969 Fire fighting equipment. Coupling part 63 for pressure hose Internally threaded
SIS SMS 1182-1975 Fire fighting equipment. Coupling 32 for pressure hose onnection measurements
SIS SS-ISO 5781:1989 Hydraulic fluid power — Pressure-control valves (excluding pressure-relief valves), se- quence valves, unloading valves, throttle valves and check valves — Mounting sur- faces
SIS SMS 1181-1969 Fire fighting equipment. Coupling part 63/32 for pressure hose. Adapter
SIS SMS 2496-1969 Fire fighting equipment. Hose coupling 110 for pressure hose. Coupling part
SIS SMS 1197-1969 Fire fighting equipment. Marine coupling 63 for pressure hose. Land part
SIS SMS 1164-1969 Fire fighting equipment. Angle valves 63 with coupling art 63 for pressure hose
SIS SMS 1198-1969 Fire fighting equipment. Marine coupling 63 for pressure hose and part. Flange

U.S. Military Regulations and Norms, pressure digestion tank

ARMY A-A-52523 VALID NOTICE 1-2004 TANK, PRESSURE: AIR BRAKE, TACTICAL TRAILERS
ARMY A-A-52523-1995 TANK, PRESSURE: AIR BRAKE, TACTICAL TRAILERS

HU-MSZT, pressure digestion tank

MSZ 13835-1968 Technical requirements and inspection of pressure tank tube bundle steel

DE-GPVA, pressure digestion tank

AD 2000-Merkblatt HP801 No.25-2004 Manufacture and testing of pressure vessels.Special pressure vessels.Liquefied gas storage vessel installation

CZ-CSN, pressure digestion tank

CSN 35 1103-1981 Power transformers. Terms and definitions
CSN 65 6805-1971 Katol PP. (Strong solution o? extréme pressure additive)
CSN 09 0127-1966 Internal oombustion engines. Correction of power and fuel consumption of compression-ignition (Diesel) engines pressure - charged by turbo-blower
CSN 11 9453-1983 Unified system of industrial hydraulic components. Filters and separators for hydraulic fluids. Terms and definitions
CSN 25 7817-1963 Water meters for hydrants; up-to 30 °C and operating pressure 10 kp/cm2

CH-SNV, pressure digestion tank

SN ISO 105/X09:1984 pipeline. Ferrous metal piping notes and guidelines. Rated pressure; working pressure; test pressure

Underwriters Laboratories (UL), pressure digestion tank

UL 393-1991 Indicating pressure gauges for fire-protection service
UL 393-2009 Indicating pressure gauges for fire-protection service
UL 1739-2004 UL Standard for Safety Pilot-Operated Pressure-Control Valves for Fire-Protection Service Fourth Edition; Reprint with revisions through and including November 30, 2007
UL 1739-2019 UL Standard for Safety Pilot-Operated Pressure-Control Valves for Fire-Protection Service

CEN - European Committee for Standardization, pressure digestion tank

PD CEN/TS 15621:2007 Animal feeding stuffs - Determination of calcium@ sodium@ phosphorus@ magnesium@ potassium@ sulphur@ iron@ zinc@ copper@ manganese@ cobalt and molybdenum after pressure digestion by ICP-AES
EN 15765:2009 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion
EN 15763:2009 Foodstuffs - Determination of trace elements - Determination of arsenic@ cadmium@ mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion

Compressed Gas Association (U.S.), pressure digestion tank

CGA E-11-2008 Stationary compressed gas cylinder discharging manifolds for working pressures up to 3000 PSIG
CGA S-1.2-2005 PRESSURE RELIEF DEVICE STANDARDS PART 2 - CARGO AND PORTABLE TANKS FOR COMPRESSED GASES
CGA S-1.2-2019 PRESSURE RELIEF DEVICE STANDARDS PART 2 - CARGO AND PORTABLE TANKS FOR COMPRESSED GASES

American National Standards Institute （ANSI), pressure digestion tank

ANSI/NSF WSCPST 2000(i2)-2005 Water Systems Council (WSC) PST-2000 Pressurized Water Storage Tank Standard
ANSI/IEEE 1407:2007 Guide for Accelerated Aging Tests for Medium-Voltage (5 kV-35 kV) Extruded Electric Power Cables Using Water-Filled Tanks

American Welding Society (AWS), pressure digestion tank

WRC 066:1961 Interpretive Report On Operating Conditions For Nuclear Pressure Vessels
WRC 119:1967 Part 1: Interpretive Report on Pressure Vessel Heads
WRC 503:2019 Compendium of Temperature-Dependent Physical Properties for Pressure Vessels, Piping and Tankage Materials
WRC 095:1964 PVRC Interpretive Report on Pressure Vessel Research, Section 1 - Design Consideration

BELST, pressure digestion tank

STB 11.13.17-2010 Fire safety standards system. Pressure fire hoses. General specifications

GOST, pressure digestion tank

GOST EN 14025-2020 Tanks for transport of dangerous goods. Metallic pressure tanks. Design and construction requirements
GOST 472-1975 Linen firefighting pressure hoses. General technical conditions

Professional Standard - Medicine, pressure digestion tank

YY 91007-1999 Specifications for vertical and cylindrical steam sterilizers
YY 91008-1999 Specifications for horizontal and cylindrical steam sterilizers
YY 91009-1999 Specifications for horizontal and rectangular steam sterilizers

International Organization for Standardization (ISO), pressure digestion tank

ISO 3935:1977 Shipbuilding; Inland navigation; Fire-fighting water system; Pressures
ISO 23821:2022 Cosmetics — Analytical methods — Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion
ISO 23251:2006 Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems
ISO/DIS 20145 Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers
ISO 20145:2019 Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers
ISO 12614-5:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 5: Tank pressure gauge

International Electrotechnical Commission (IEC), pressure digestion tank

IEC 60076-11:2018/ISH1:2020 Interpretation sheet 1 - Power transformers - Part 11: Dry-type transformers

国家市场监督管理总局、中国国家标准化管理委员会, pressure digestion tank

GB/T 37563-2019 Safety requirements for pressurized water electrolysis system for hydrogen production
GB/T 37562-2019 Technical conditions of pressurized water electrolysis system for hydrogen production

NZ-SNZ, pressure digestion tank

AS/NZS 1635.7.1:1995 Methods of Test for Pressure-Sensitive Adhesive Tape Method 7.1: Unwind Force

GOSTR, pressure digestion tank

GOST R 51049-2019 Fire equipment. Fire pressure hoses. General technical requirements. Test methods

(U.S.) Plastic Pipe Association, pressure digestion tank

PPI TR-9-2002 Recommended Design Factors and Design Coefficients for Thermoplastic Pressure Pipe

AT-ON, pressure digestion tank

ONORM C 2135-1978 Couplings for tanks; nominal pressure 10; requirements, testing, marking, dimensions

American Society of Mechanical Engineers (ASME), pressure digestion tank

ASME BPVC.VIII.1 INT Vol 49-2001 ASME Boiler & Pressure Vessel Code - Section 8: Rules for Construction of Pressure Vessels; Division 1; Pressure Vessels; Interpretations Volume 49

Professional Standard - Water Conservancy, pressure digestion tank

SL 237-019-1999 Code for test of soil - pore water pressure dissipation test

Professional Standard - Public Safety Standards, pressure digestion tank

GA 29-1992 Performance requirements and test methods of pressure switches for fire protection

BE-NBN, pressure digestion tank

NBN-ISO 1219-1:1993 Fluid power systems and components. Graphic symbols and circuit diagrams. Part 1: Graphic symbols

Professional Standard - Electricity, pressure digestion tank

DL/T 314-2010 General specifications for power system under-voltage load-shedding and separation equipment
DL/T 1560-2016 Guidelines of on-site assembly and test for disassembly transportation power transformer

KE-KEBS, pressure digestion tank

KS 06-200-1982 KENYA STANDARD SPECIFICATION FOR CIRCULAR UNDERGROUND NON-PRESSURIZED STORAGE TANKS FOR PETROLEUM INDUSTRY

United States Navy, pressure digestion tank

NAVY MIL-I-24718 (1)-1993 INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING; GENERAL SPECIFICATION FOR
NAVY MIL-I-24718-1990 INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING; GENERAL SPECIFICATION FOR

SAE - SAE International, pressure digestion tank

SAE AMS4944-1974 TITANIUM ALLOY TUBING@ SEAMLESS@ HYDRAULIC 3.0Al - 2.5V Cold Worked@ Stress Relieved
SAE AMS4944E-1995 Titanium Alloy@ Seamless@ Hydraulic Tubing 3.0Al - 2.5V Cold Worked@ Stress Relieved (UNS R56320)

Shanghai Provincial Standard of the People's Republic of China, pressure digestion tank

DB31/ 848-2014 Energy Consumption Quota per Unit Product of Non-ferrous Metal Die Casting

American Society for Testing and Materials (ASTM), pressure digestion tank

ASTM D2879-92e1 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-96 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-97(2002)e1 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-97 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-97(2007) Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D287-12a Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
ASTM D287-12 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
ASTM D2879-10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

CU-NC, pressure digestion tank

NC 97-81-1986 Packaging. Determination of Hydrolytic Resistance of Inside Surface of Glass Vessels. Autoclave Method

NO-SN, pressure digestion tank

NS 1544-1992 Vertical cylindrical steel tanks for storage of flammable A, B and C liquids at internal pressure approximating atmospheric pressure (Corrigendum A1:1992 included)