ZH
RU
ES
pitting
pitting, Total:204 items.
In the international standard classification, pitting involves: Gears, Corrosion of metals, Iron and steel products, Medical equipment, Fuels, Surface treatment and coating, TESTING, Test conditions and procedures in general, Hydraulic energy engineering, Environmental testing.
AGMA - American Gear Manufacturers Association, pitting
- 11FTM17-2011 Morphology of Micropitting
- 99FTM4-1999 Gear Oil Micropitting Evaluation
- 210.02-65-1965 Surface Durability (Pitting) of Spur Gear Teeth
- 07FTM15-2007 Experience with a Disc Rig Micropitting Test
- 12FTM20-2012 The Effect of the Surface Roughness Profile on Micropitting
- 06FTM07-2006 Improvement of Standardized Test Methods for Evaluating the Lubricant Influence on Micropitting and Pitting Resistance of Case Carburized Gears
- 92FTM6-1992 Comparison of Carburized Gear Materials in Pitting
- 11FTM12-2011 The Application of the First International Calculation Method for Micropitting
- 97FTM9-1997 Relations Between Wear and Pitting Phenomena in Worm Gears
- 04FTM5-2004 Investigations on the Micropitting Load Capacity of Case Carburized Gears
- 99FTM5-1999 Analysis of Micropitting on Prototype Surface Fatigue Test Gears
- 04FTM4-2004 Influence of Surface Roughness on Gear Pitting Behavior
- 10FTM11-2010 Point-Surface-Origin@ PSO@ Macropitting Caused by Geometric Stress Concentration@ GSC
- 07FTM14-2007 Roughness and Lubricant Chemistry Effects in Micropitting
- 06FTM06-2006 An Analytical Approach to the Prediction of Micropitting on Case Carburised Gears
- 14FTM21-2014 On the Correlation of Specific Film Thickness and Gear Pitting Life
- 11FTM15-2011 Micropitting - A Serious Damage? Testing@ Standards and Practical Experience
- 211.02-69-1969 Surface Durability (Pitting) of Helical and Herringbone Gear Teeth
- 11FTM16-2011 Gear Lubrication - Stopping Micropitting by Using the Right Lubricant
- 08FTM10-2008 The Effect of Superfinishing on Gear Micropitting@ Part II
- 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
- 04FTM7-2004 A Short Procedure to Evaluate Micropitting Using the New AGMA Designed Gears
- 91FTM17-1991 The Influence of Lubrication on the Onset of Surface Pitting in Machinable Hardness Gear Teeth
- 04FTM6-2004 The Effect of a ZnDTP Anti--wear Additive on Micropitting Resistance of Carburised Steel Rollers
- 09FTM13-2009 Bending Fatigue@ Impact and Pitting Resistance of Ausform Finished P/M Gears
- 01FTM7-2001 Chemically Accelerated Vibratory Finishing for the Elimination of Wear and Pitting of Alloy Steel Gears
- 98FTM8-1998 New Test Methods for the Evaluation of Wear@ Scuffing and Pitting Capacity of Gear Lubricants
- 06FTM08-2006 An Evaluation of FZG Micropitting Test Procedures and Results for the Crowned AGMA Test Gears
- 09FTM18-2009 Does the Type of Gear Action Affect the Appearance of Micropitting and Gear Life?
- 09FTM12-2009 The Anatomy of a Micropitting Induced Tooth Fracture Failure - Causation@ Initiation@ Progression and Prevention
- 218.01-1982 Standard for Rating the Pitting Resistance and Bending Strength of Spur and Helical Involute Gear Teeth
- 908-B89-1989 Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur@ Helical and Herringbone Gear Teeth
- 98FTM4-1998 Effect of Uncontrolled Heat Treat Distortion on the Pitting Life of Ground@ Carburized and Hardened Gears
- 2003-A86-1986 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel@ ZEROL Bevel@ and Spiral Bevel Gear Teeth
- 2003-B97-1997 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel@ Zerol Bevel@ and Spiral Bevel Gear Teeth
Society of Automotive Engineers (SAE), pitting
American Gear Manufacturers Association, pitting
- AGMA 99FTM4-1999 Gear Oil Micropitting Evaluation
- AGMA 07FTM15-2007 Experience with a Disc Rig Micropitting Test
- AGMA 06FTM07-2006 Improvement of Standardized Test Methods for Evaluating the Lubricant Influence on Micropitting and Pitting Resistance of Case Carburized Gears
- AGMA 11FTM12-2011 The Application of the First International Calculation Method for Micropitting
- AGMA 92FTM6-1992 Comparison of Carburized Gear Materials in Pitting
- AGMA 07FTM14-2007 Roughness and Lubricant Chemistry Effects in Micropitting
- AGMA 06FTM06-2006 An Analytical Approach to the Prediction of Micropitting on Case Carburised Gears
- AGMA 04FTM4-2004 Influence of Surface Roughness on Gear Pitting Behavior
- AGMA 97FTM9-1997 Relations Between Wear and Pitting Phenomena in Worm Gears
- AGMA 99FTM5-1999 Analysis of Micropitting on Prototype Surface Fatigue Test Gears
- AGMA 14FTM21-2014 On the Correlation of Specific Film Thickness and Gear Pitting Life
- AGMA 08FTM10-2008 The Effect of Superfinishing on Gear Micropitting, Part II
- AGMA 11FTM16-2011 Gear Lubrication - Stopping Micropitting by Using the Right Lubricant
- AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
- AGMA 91FTM17-1991 The Influence of Lubrication on the Onset of Surface Pitting in Machinable Hardness Gear Teeth
- AGMA 09FTM12-2009 The Anatomy of a Micropitting Induced Tooth Fracture Failure - Causation, Initiation, Progression and Prevention
- AGMA 06FTM08-2006 An Evaluation of FZG Micropitting Test Procedures and Results for the Crowned AGMA Test Gears
- AGMA 98FTM8-1998 New Test Methods for the Evaluation of Wear, Scuffing and Pitting Capacity of Gear Lubricants
- AGMA 01FTM7-2001 Chemically Accelerated Vibratory Finishing for the Elimination of Wear and Pitting of Alloy Steel Gears
- AGMA 09FTM18-2009 Does the Type of Gear Action Affect the Appearance of Micropitting and Gear Life?
- AGMA 2003-C10-2010 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth
- AGMA 2003-B97-1997 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel, and Spiral Bevel Gear Teeth
- AGMA 908-B89-1989 Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth
- AGMA 98FTM4-1998 Effect of Uncontrolled Heat Treat Distortion on the Pitting Life of Ground, Carburized and Hardened Gears
British Standards Institution (BSI), pitting
- BS PD ISO/TR 15144-2:2014 Calculation of micro-pitting load capacity of cylindrical spur and helical gears. Examples of calculation for micropitting
- BS EN ISO 11463:2020 Corrosion of metals and alloys. Guidelines for the evaluation of pitting corrosion
- 19/30357802 DC BS EN ISO 11463. Corrosion of metals and alloys. Evaluation of pitting corrosion
- BS EN ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
- BS EN ISO 17864:2008 Corrosion of metals and alloys. Determination of the critical pitting temperature under potientiostatic control
- BS ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control
- BS ISO 10300-2:2023 Calculation of load capacity of bevel gears - Calculation of surface durability (macropitting)
- BS ISO 10300-2:2014 Calculation of load capacity of bevel gears. Calculation of surface durability (pitting)
- BS ISO 6336-2:2019 Calculation of load capacity of spur and helical gears - Calculation of surface durability (pitting)
- BS ISO 3079:2022 Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions
- BS PD ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears. Introduction and basic principles
- 22/30402445 DC BS ISO 10300-2. Calculation of load capacity of bevel gears - Part 2. Calculation of surface durability (pitting)
- BS EN ISO 8993:2018 Tracked Changes. Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method
- PD ISO/TS 6336-22:2018 Tracked Changes. Calculation of load capacity of spur and helical gears. Calculation of micropitting load capacity
- BS EN ISO 8994:2018 Tracked Changes. Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Grid method
- BS EN 60609-2:1999 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines
- PD 6484:1979 Commentary on corrosion at bimetallic contacts and its alleviation
- PD ISO/TR 6336-31:2018 Tracked Changes. Calculation of load capacity of spur and helical gears. Calculation examples of micropitting load capacity
- 21/30408318 DC BS ISO 3079. A two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions
KR-KS, pitting
- KS D ISO 11463-2017 Corrosion of metals and alloys-Evaluation of pitting corrosion
- KS D ISO 11463-2021 Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
- KS D 0289-2018(2023) Test methods for determination of resistance to pitting and crevice corrosion of metallic materials for surgical implants
- KS B IEC 60609-2-2021 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines — Part 2: Evaluation in Pelton turbines
German Institute for Standardization, pitting
- DIN EN ISO 11463:2008 Corrosion of metals and alloys - Evaluation of pitting corrosion (ISO 11463:1995); German version EN ISO 11463:2008
- DIN EN ISO 11463:2020-12 Corrosion of metals and alloys - Guidelines for the evaluation of pitting corrosion (ISO 11463:2020); German version EN ISO 11463:2020
- DIN 3990-2:1987-12 Calculation of load capacity cylindrical gears; calculation of pitting resistance
- DIN 3990-2:1987 Calculation of load capacity cylindrical gears; calculation of pitting resistance
- DIN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005);English version of DIN EN ISO 17864:2008-07
- DIN EN ISO 17864:2008-07 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005); German version EN ISO 17864:2008
- DIN EN ISO 8993:2018-12 Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018); German version EN ISO 8993:2018
- DIN 3991-2:2023-08 Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (macropitting) / Note: Date of issue 2023-07-14*Intended as replacement for DIN 3991-2 (1988-09).
- DIN 3991-2:1988-09 Calculation of load capacity of bevel gears without pinion offset; calculation of pitting resistance
- DIN EN ISO 11463:2020 Corrosion of metals and alloys - Guidelines for the evaluation of pitting corrosion (ISO 11463:2020); German version EN ISO 11463:2020
Korean Agency for Technology and Standards (KATS), pitting
- KS D 0238-2004 Method of pitting potential measurement for stainless steels
- KS D 0238-2004(2019) Method of pitting potential measurement for stainless steels
- KS D 0238-1982 Method of pitting potential measurement for stainless steels
- KS D ISO 11463:2021 Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
- KS D ISO 8994-2002(2022) Anodized aluminium and aluminium alloys-Rating system for the evaluation of pitting corrosion-Grid method
- KS D 0278-2005 Standard test methods for pitting and crevice corrosion resistance of stainless steels and related alloys by use of ferric chloride solution
- KS D ISO 8994-2002(2017) Anodized aluminium and aluminium alloys-Rating system for the evaluation of pitting corrosion-Grid method
- KS D ISO 8993-2012(2017) Anodizing of aluminium and its alloys-Rating system for the evaluation of pitting corrosion-Chart method
- KS B ISO 10300-2-2004(2019) Calculation of load capacity of belvel gears-Part 2:Calculation of surface durability(pitting)
- KS D 0269-2020 Potentiostatic polarization test method for determination of critical pitting temperature for stainless steels
- KS D 0269-2009 Potentiostatic polarization test method for determination of critical pitting temperature for stainless steels
- KS D ISO 8993-2012(2022) Anodizing of aluminium and its alloys-Rating system for the evaluation of pitting corrosion-Chart method
- KS D 0289-2009 Test methods for determination of resistance to pitting and crevice corrosion of metallic materials for surgical implants
- KS D 0297-2019 Test method for determination of pitting corrosion resistance for seal weldment between tube and tube sheet
- KS D 0289-2018 Test methods for determination of resistance to pitting and crevice corrosion of metallic materials for surgical implants
- KS D 0297-2009 Test method for determination of pitting corrosion resistance for seal weldment between tube and tube sheet
- KS B ISO 6336-2-2015(2020) Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability(pitting)
- KS B IEC 60609-2-2006(2016) Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines-Part 2:Evaluation in Pelton turbines
- KS D 0278-2020 Standard test methods for pitting and crevice corrosion resistance of stainless steels and related alloys by use of ferric chloride solution
- KS B IEC 60609-2:2021 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines — Part 2: Evaluation in Pelton turbines
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pitting
- GB/T 17899-1999 Method of pitting potential measurement for stainless steels
- GB/T 18590-2001 Corrosion of metals and alloys--Evaluation of pitting corrosion
- GB/T 32550-2016 Corrosion of metals and alloys.Determination of the critical pitting temperature under potentiostatic control
- GB/T 28907-2012 Sulfuric acid dew-point corrosion resistance steel plates and strips
- GB/T 17899-2023 Corrosion of metals and alloys - Potentiodynamic measurement of pitting potential of stainless steel in sodium chloride solution
- GB/T 10062.2-2003 Calculation of load capacity of bevel gear--Part 2:Calculation of surface durability(pitting)
- GB/T 17897-1999 Test of pitting corrosion resistance of stainless steels in the ferric chloride solution
- GB/T 17897-2016 Corrosion of metals and alloys.Corrosion test for pitting corrosion resistance of stainless steels in the ferric chloride solution
International Organization for Standardization (ISO), pitting
- ISO/TR 15144-2:2014 Calculation of micro-pitting load capacity of cylindrical spur and helical gears - Part 2: Examples of calculation for micropitting
- ISO 11463:2020 Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
- ISO 17864:2005 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
- ISO/FDIS 10300-2 Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting)
- ISO 10300-2:2011 Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (macropitting)
- ISO 10300-2:2023 Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (macropitting)
- ISO 10300-2:2001 Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting)
- ISO 3079:2022 Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions
- ISO 10300-2:2014 Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting)
- ISO 6336-2:2019 Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting)
- ISO 6336-2:1996 Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pittings)
- ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
- ISO/TR 15144-1:2010 Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles
- ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles
American Society for Testing and Materials (ASTM), pitting
- ASTM G46-94(2018) Standard Guide for Examination and Evaluation of Pitting Corrosion
- ASTM G46-21 Standard Guide for Examination and Evaluation of Pitting Corrosion
- ASTM G46-76(1986)e1 Standard Practice for Examination and Evaluation of Pitting Corrosion
- ASTM G150-99 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
- ASTM G150-99(2004) Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
- ASTM G150-99(2010) Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
- ASTM F746-87(1999) Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
- ASTM F746-04(2021) Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
- ASTM G150-13 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
- ASTM G150-18 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys
- ASTM F2111-22 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
- ASTM G48-11 : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- ASTM G48-11(2020)e1 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
Japanese Industrial Standards Committee (JISC), pitting
- JIS G 0577:2005 Method of pitting potential measurement for stainless steels
- JIS G 0577:2014 Methods of pitting potential measurement for stainless steels
- JIS G 0590:2005 Method of critical pitting temperature measurement for stainless steels
- JIS G 0590 AMD 1:2013 Method of critical pitting temperature measurement for stainless steels (Amendment 1)
- JIS G 0577:1981 Method of pitting potential measurement for stainless steels
Professional Standard - Medicine, pitting
- YY/T 1074-2002 Implants for surgery----Measuring method for pitting corrosion potential on stainless products
Professional Standard - Energy, pitting
- NB/SH/T 0922-2016 Determination of anti-micropitting properties of lubricating oils FZG method
国家能源局, pitting
- SH/T 0922-2016 Determination of anti-micropitting properties of lubricating oils by FZG method
Danish Standards Foundation, pitting
- DS/EN ISO 11463:2008 Corrosion of metals and alloys - Evaluation of pitting corrosion
- DS/EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
- DS/EN ISO 8993:2010 Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method
- DS/EN 60609-2:1999 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in pelton turbines
- DS/ISO/TR 15144-1:2011 Calculation of micropitting load capacity of cylindrical spur and helical gears – Part 1: Introduction and basic principles
RU-GOST R, pitting
- GOST 9.912-1989 United system of corrosion and ageing protection. Corrosion resistant steels and alloys. Methods of accelerated tests for resistance to pitting corrosion
ES-UNE, pitting
- UNE-EN ISO 11463:2021 Corrosion of metals and alloys - Guidelines for the evaluation of pitting corrosion (ISO 11463:2020)
- UNE-EN ISO 8994:2019 Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
- UNE-EN ISO 8993:2019 Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
Lithuanian Standards Office , pitting
- LST EN ISO 11463:2008 Corrosion of metals and alloys - Evaluation of pitting corrosion (ISO 11463:1995)
- LST EN ISO 11463:2020 Corrosion of metals and alloys - Guidelines for the evaluation of pitting corrosion (ISO 11463:2020)
- LST EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
- LST EN 60609-2-2001 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines. Part 2. Evaluation in Pelton turbines (IEC 60609-2:1997)
AENOR, pitting
- UNE-EN ISO 11463:2009 Corrosion of metals and alloys - Evaluation of pitting corrosion (ISO 11463:1995)
- UNE-EN ISO 17864:2009 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
- UNE-EN 60609-2:1999 CAVITATION PITTING EVALUATION IN HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES. PART 2: EVALUATION IN PELTON TURBINES.
AT-ON, pitting
- OENORM EN ISO 11463:2020 Corrosion of metals and alloys - Guidelines for the evaluation of pitting corrosion (ISO 11463:2020)
CH-SNV, pitting
- SN EN ISO 11463:2021 Corrosion of metals and alloys - Guidelines for the evaluation of pitting corrosion (ISO 11463:2020)
PL-PKN, pitting
- PN-EN ISO 11463-2021-02 E Corrosion of metals and alloys -- Guidelines for the evaluation of pitting corrosion (ISO 11463:2020)
Association Francaise de Normalisation, pitting
- NF A05-119*NF EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
- NF A91-441:1989 Anodized aluminium and aluminium alloys. Rating system for the evaluation of pitting corrosion. Grid method.
- NF A91-492*NF EN ISO 8993:2018 Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method
- NF A91-440:1989 ANODIZED ALUMINIUM AND ALUMINIUM ALLOYS. RATING SYSTEM FOR THE EVALUATION OF PITTING CORROSION. CHART METHOD.
- NF EN ISO 8993:2018 Anodisation de l'aluminium et de ses alliages - Système de cotation de la corrosion par piqûres - Méthode reposant sur des images-types
- XP E23-033-22*XP ISO/TS 6336-22:2019 Calculation of load capacity of spur and helical gears - Part 22 : calculation of micropitting load capacity
- NF E23-030-2*NF ISO 6336-2:2020 Calculation of load capacity of spur and helical gears - Part 2 : calculation of surface durability (pitting)
- XP ISO/TS 6336-22:2019 Calcul de la capacité de charge des engrenages à dentures droite et hélicoïdale - Partie 22 : calcul de la capacité de charge aux micropiqûres
- NF C55-409-2*NF EN 60609-2:2000 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2 : evaluation in Pelton turbines
- FD E23-030-31*FD ISO/TR 6336-31:2019 Calculation of load capacity of spur and helical gears - Part 31 : calculation examples of micropitting load capacity
- FD ISO/TR 6336-31:2019 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 31 : exemples de calcul de la capacité de charge aux micropiqûres
European Committee for Standardization (CEN), pitting
- EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
- CEN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
- EN 12373-18:2001 Aluminium and Aluminium Alloys - Anodizing - Part 18: Rating System for the Evaluation of Pitting Corrosion - Chart Method
- EN 12373-19:2001 Aluminium and Aluminium Alloys - Anodizing - Part 19: Rating System for the Evaluation of Pitting Corrosion - Grid Method
Professional Standard - Civil Aviation, pitting
- MH/T 6102-2014 Standard practice for measuring intergranular attack or end grain pitting on metals caused by aircraft chemical processes
CZ-CSN, pitting
- CSN 01 4686 Cast.5-1988 Calculation of load capacily of spur and bcvcl gcars.lindurance pitting rcsistancc and slrength numbers and material qualities
国家市场监督管理总局、中国国家标准化管理委员会, pitting
- GB/T 28907-2021 Sulfuric acid dew-point corrosion resistance steel plate and strip
- GB/T 3480.2-2021 Calculation of load capacity of spur and helical gears—Part 2: Calculation of surface durability (pitting)
Group Standards of the People's Republic of China, pitting
- T/CSCP 0035.9-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 9: Pitting Corrosion Test Methods on Low Alloy Structural Steels
- T/CSTM 00046.9-2018 Corrosion test of low alloy structure steels -- Part 9: Test method of pitting corrosion
(U.S.) Ford Automotive Standards, pitting
GM North America, pitting
- GM4357P-2010 Spot Test Etch Susceptibility of Stainless Steel Issue 5; Do Not Use on New Programs; Replaced by GMW15284
IT-UNI, pitting
未注明发布机构, pitting
- BS ISO 6336-2:2019(2020) Calculation of load capacity of spur and helical gears Part 2 : Calculation of surface durability (pitting)
American National Standards Institute (ANSI), pitting
- ANSI/AGMA 2003-B-1997 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth
- ANSI/AGMA 2003-2010 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth
American Welding Society (AWS), pitting
- AWS PRGC-1999 The Practical Reference Guide for Corrosion of Welds - Causes and Cures