ZH
RU
ES

Particle zero point detection method

Particle zero point detection method, Total:326 items.

In the international standard classification, Particle zero point detection method involves: Textile machinery, Shipbuilding and marine structures in general, Domestic, commercial and industrial heating appliances, TESTING, Internal combustion engines, Air quality, Soil quality. Pedology, Fuels, Vocabularies, Farming and forestry, Construction materials, Cereals, pulses and derived products, Products of the chemical industry, Analytical chemistry, Optics and optical measurements, Testing of metals, Power stations in general, Clothes, Refractories, Semiconducting materials, Wastes, Graphic technology, Environmental protection, Test conditions and procedures in general, Aerospace fluid systems and components, Elements of buildings, Non-ferrous metals, Fluid power systems, Protective equipment, Laboratory medicine, Wind turbine systems and other alternative sources of energy, Plastics, Quality, Mechanical testing, Road engineering, Products of the textile industry, Particle size analysis. Sieving, Tobacco, tobacco products and related equipment, Semiconductor devices, Animal feeding stuffs, Medical equipment, Nuclear energy engineering, Installations in buildings, Ceramics, Headgear. Clothing accessories. Fastening of clothing, Electronic components in general, Microbiology, Aids for disabled or handicapped persons, Rubber, Powder metallurgy, Hydraulic fluids, General methods of tests and analysis for food products, Physics. Chemistry, Materials for aerospace construction, Occupational safety. Industrial hygiene, Wood, sawlogs and sawn timber.

Group Standards of the People's Republic of China, Particle zero point detection method

T/SDAS 447-2022 Detection method of main parameters of mask particle filtration efficiency detector
T/CAAMTB 54-2021 Test method for particulate matter filtration in vehicle cabin
T/CICEIA /CAMS7-2020 Measurement methods of fine particles for mobile pollution sources
T/CIECCPA 048-2023 Test method for condensable particulate matter in flue gas of coal-fired power plant — Impinger method
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/CTES 1017-2019 Textile Fabric Tactile Testing and Evaluation Method Three-Point Beam Method
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/SPMA T/SPMA002-2023 Testing method for the soothing function of cosmetics in vitro mast cell based assay of degranulation Inhibition and histamine release

Professional Standard-Ships, Particle zero point detection method

CB/T 3997-2008 Determination method of contaminating level by particles for marine fluid

American Society for Testing and Materials (ASTM), Particle zero point detection method

ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM C123/C123M-14 Standard Test Method for Lightweight Particles in Aggregate
ASTM D3685/D3685M-13(2021) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM E1288-89(1994) Standard Test Method for The Durability of Biomass Pellets (Withdrawn 2003)
ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D6986-03(2016) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM E2558-13 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
ASTM D1739-98(2017) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM B797-20 Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
ASTM D4977-03(2009) Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM E2515-11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM E2780-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
ASTM D4600-95(2016) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D8108-21 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D8108-20 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D4176-21 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-93(1997) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-02 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-22 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D5452-08 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D4977/D4977M-20 Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion
ASTM E255-91(1997) Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM E2558-08 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM E2515-10 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM E2558-13(2021) Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
ASTM D4600-22 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D6986-03(2020) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM D4977-98b Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D8108-21e1 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D4977-03 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D6786-02 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D4600-95(2005) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D4600-95(2010) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM E2515-07 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM E2515-11(2017) Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D5452-05 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D5452-12 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D4977/D4977M-03(2013)e1 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D4600-95(2000)e1 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D4977/D4977M-03(2019) Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D6986-03(2010) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM D6217-10 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D6217-11 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM E3053-18e2 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
ASTM D7439-08 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmax2013;Mass Spectrometry
ASTM E3053-17 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
ASTM E3053-18e1 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
ASTM E3053-18 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
ASTM C1453-00(2011) Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
ASTM C1453-19 Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
ASTM C1453-00(2006) Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
ASTM C1453-00 Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
ASTM D7439-21 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM D6650-01 Standard Test Method for Determining the Dynamic Wiping Efficiency, Wet Particle Removal Ability, and Fabric Particle Contribution of Nonwoven Fabrics Used in Cleanrooms
ASTM D6494-99 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6494-99(2004)e1 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM E2558-07 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM D6494-22 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM D7439-14 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmandash;Mass Spectrometry
ASTM E2618-13(2019) Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances
ASTM E2618-08 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances
ASTM D6494-99(2010) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6494-99(2015) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6331-98(2005) Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-98 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-13 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D1704/D1704M-95e1 Standard Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filter Sample
ASTM F51-00(2002)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F51/F51M-20 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D3266-91(2000)e1 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D3267-20 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM D3266-91(2018) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D3267-12 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM D7321-11e1 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D5511-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D6831-05a Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-05 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5511-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM C697-16 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
ASTM D7321-08 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM B761-06(2011) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-17 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM D7035-10 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7321-11 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM E2864-18 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM D7035-16 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7035-04 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7035-21 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E2864-13 Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM D8166-21a Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Condition Monitors
ASTM D8166-21 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
ASTM D8166-22 Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors
ASTM D8166-17 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption

Professional Standard - Environmental Protection, Particle zero point detection method

HJ/T 374-2007 Technical requirement and test procedures for total suspended particulates sampler
HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
HJ 653-2013 Specifications and test procedures for ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
HJ 653-2021 Technical requirements and detection methods for continuous automatic monitoring system of ambient air particulate matter (PM10 and PM2.5)
HJ 76-2017 Technical requirements and detection methods of continuous monitoring system for flue gas (SO2, NOx, particulate matter) emissions from stationary pollution sources
HJ 656-2013 Technical specifications for gravimetric measurement methods for PM<下标2.5> in ambient air
HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"
HJ 653-2013(XG1-2018) Ambient Air Particulate Matter (PM10 and PM2.5) Continuous Automatic Monitoring System Technical Requirements and Detection Methods "No. 1 Amendment"
HJ 656-2013(XG1-2018) Ambient Air Particulate Matter (PM2.5) Manual Monitoring Method (Gravimetric Method) Technical Specification "No. 1 Amendment"

工业和信息化部/国家能源局, Particle zero point detection method

JB/T 12895-2016 Classification and detection method of pollutant particles in internal combustion engine lubricating oil

Anhui Provincial Standard of the People's Republic of China, Particle zero point detection method

DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air

British Standards Institution (BSI), Particle zero point detection method

BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
BS DD CEN/TS 15150:2005 Solid biofuels — Methods for the determination of particle density
BS DD CEN/TS 15150:2006 Solid biofuels. Methods for the determination of particle density
BS ISO 16002:2004 Stored cereal grains and pulses - Guidance on the detection of infestation by live invertebrates by trapping
BS 2782-4 Method 454G:1996 Methods of testing plastics. Chemical properties. Polymer dispersions. Determination of sieve residue (gross particle and coagulum content)
BS EN 12697-17:2017 Tracked Changes. Bituminous mixtures. Test methods. Particle loss of porous asphalt specimens
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS ISO 15592-3:2009 Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and ni
BS ISO 15592-3:2008 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and
19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS EN 12341:1999 Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
22/30443631 DC BS EN 12341. Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS 1747-13:1994 Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method
BS EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
BS EN 14902:2005(2009) Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
PD ISO/TS 21569-7:2022 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products. Real-time PCR methods for the detection of CaMV and Agrobacterium Ti-plasmid derived DNA sequences
DD ENV 13936-2001 Workplace atmospheres. Measurement of chemical agents present as mixtures of airborne particles and vapour. Requirements and test methods

Professional Standard - Civil Aviation, Particle zero point detection method

MH/T 6068-2010 Standard test method for free water, particulate and other contamination in aviation fuel-Field inspection procedures
MH/T 6068-2017 Standard test method for free water, particulate and other contamination in aviation fuels.Field inspection procedures

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Particle zero point detection method

GB/T 7702.9-1997 Standard test method for granular activated carbon from coal--Determination of ignition temperature
GB/T 7702.9-2008 Test method for granular activated carbon from coal.Determination of ignition temperature
GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
GB/T 16157-1996 The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
GB/T 27765-2011 Testing methods of SiO, TiO, FeO and AlO nanoparticles biological effect by transmission electron microscope (TEM)

CZ-CSN, Particle zero point detection method

CSN 65 4823-1982 Minerál fertilizers Method for the determination of granulometric composilion
CSN 44 1787 Z1-1996
CSN 46 7092-32-1998 Testing methods for feeding stuffs - Part 32: Determination of the adipose particles size in milk feeding mixtures

Professional Standard - Agriculture, Particle zero point detection method

BJY 202304:2023 Supplementary testing methods for inspection items of Scutellaria baicalensis extract in Xiaobuihu granules
302药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4001 Determination of water resistance of glass particles at 121°C
空气和废气监测分析方法 5.1.3-2003 Part Five Pollution Source Monitoring Chapter One Sampling Three Particle Sampling Methods
GB/T 16157-1996(XG1-2018) "Determination of Particulate Matter in Exhaust from Stationary Pollution Sources and Sampling Methods of Gaseous Pollutants" Amendment No. 1

Standard Association of Australia （SAA）, Particle zero point detection method

AS 1141.32:1995 Methods for sampling and testing aggregates Method 32: Weak particles (including clay lumps, soft and friable particles ) in coarse aggregates
AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate
AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
AS/NZS 3580.10.2:2013
AS 1141.6.1:1995 Methods for sampling and testing aggregates Method 6.1: Particle density and water absorption of coarse aggregate - Weighing - in-waer method
AS/NZS 3580.9.17:2018 Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods
AS 4323.2:2023 Stationary source emissions, Method 2: Determination of total particulate matter — Isokinetic manual sampling — Gravimetric method
AS/NZS 3580.9.12:2022 Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter — PM2.5 beta attenuation monitors
AS/NZS 3580.9.11:2022 Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter — PM10 beta attenuation monitors
AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
AS/NZS 3580.9.12:2013
AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
AS 1289.4.4.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the electrical resistivity of a soil - Method for sands and granular materials
AS 1774.2:2001(R2013)
AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
AS/NZS 3580.9.11:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 beta attenuation monitors
AS/NZS 3580.9.15:2014
AS 3580.13.3:1993 Methods for sampling and analysis of ambient air Method 13.3: Determination of fluorides-Total gaseous and acid-soluble airborne particulate fluoride-Sodium acetate coated tube absorption
AS/NZS 3580.9.7:2009
AS/NZS 3580.9.13:2022 Methods for sampling and analysis of ambient air, Method 9.13: Determination of suspended particulate matter — PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor
AS/NZS 3580.13.2:2013
AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
AS/NZS 3580.9.13:2013
AS/NZS 3580.9.14:2013
AS/NZS 3580.9.6:2015

廊坊市市场监督管理局, Particle zero point detection method

DB1310/T 225-2020 Method for determining the ability of woody plants to absorb airborne particles

CEN - European Committee for Standardization, Particle zero point detection method

PD CEN/TS 15150:2005 Solid biofuels - Methods for the determination of particle density
PD CEN/TS 15210-1:2005 Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets
PD CEN/TS 15210-2:2005 Solid biofuels - Methods for the determination of mechanicaldurability of pellets and briquettes - Part 2: Briquettes
EN ISO 12799:2019 Nuclear energy - Determination of nitrogen content in UO2@ (U@Gd)O2 and (U@Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method
EN ISO 15651:2017 Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2@ (U@Gd)O2 and (U@Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Particle zero point detection method

GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size
GB/T 34168-2017 Test method of gold and silver nanoparticle materials biological effect by transmission electron microscope

International Organization for Standardization (ISO), Particle zero point detection method

ISO 16002:2004 Stored cereal grains and pulses - Guidance on the detection of infestation by live invertebrates by trapping
ISO 10155:1995 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
ISO 15592-3:2008 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of wa
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO 12799:2015 Nuclear energy - Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method
ISO/TS 21396:2017 Rubber — Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments — Pyrolysis-GC/MS method
ISO/TS 21569-7:2022 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 7: Real-time PCR based methods for the detecti
ISO 15592-3:2003 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of wa
ISO 15592-3:2022 Fine-cut tobacco and smoking articles made from it — Methods of sampling, conditioning and analysis — Part 3: Determination of total particulate matter of smoking articles using a routine analytical s
ISO 17190-11:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 11: Determination of content of respirable particles
ISO 15651:2015 "Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method"
ISO/DIS 27548 Additive manufacturing of plastics — Environment, health, and safety — Test method for determination of particle and chemical emission rates from desktop material extrusion 3D printer
ISO 13061-5:2020 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 5: Determination of strength in compression perpendicular to grain

IN-BIS, Particle zero point detection method

Association Francaise de Normalisation, Particle zero point detection method

NF EN 60970:2007 Isolants liquides - Méthodes de détermination du nombre et de la taille des particules
NF X43-003:1966 Atmospheric pollution. Method of weight determination of solid particles entrained by combustion gases.
NF E48-682:2000 Hydraulic fluid power - On-line liquid automatic particle-counting systems for liquid - Methods of calibration and validation.
NF EN 60749-16:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 16 : détection de bruit d'impact de particules (PIND)
NF EN 12341:2014 Air ambiant - Méthode normalisée de mesurage gravimétrique pour la détermination de la concentration massique MP10 ou MP2,5 de matière particulaire en suspension
NF EN 14902:2005 Qualité de l'air ambiant - Méthode normalisée pour la mesure du plomb, cadmium, de l'arsenic et du nickel dans la fraction MP10 de la matière particulaire en suspension
NF ISO 16740:2005 Air des lieux de travail - Détermination du chrome hexavalent dans les particules en suspension dans l'air - Méthode par chromatographie ionique et détection spectrophotométrique avec diphényl carbazide
NF V37-043-3*NF ISO 15592-3:2009 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3 : determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of w
NF X43-026*NF EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter.
NF ISO 22253:2019 Cigarettes - Dosage de la nicotine dans la matière particulaire totale provenant du courant principal de fumée avec un régime de fumage intense - Méthode par chromatographie en phase gazeuse
NF EN ISO 29463-5:2022 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 5 : méthode d'essai des éléments filtrants
NF EN ISO 14720-1:2013 Essais des matières premières pour produits réfractaires - Dosage du soufre dans les matières premières non oxydantes sous la forme de poudre et de granulés - Partie 1 : méthodes d'essai par infrarouge
NF X44-014-4*NF EN ISO 29463-4:2018 High-efficiency filters and filter media for removing particles in air - Part 4 : test method for determining leakage of filter elements-Scan method
NF EN ISO 29463-4:2018 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 4 : méthode d'essai pour déterminer l'étanchéité de l'élément filtrant (méthode scan)
NF ISO 15592-3:2023 Tabac à rouler et objets confectionnés à partir de ce type de tabac - Méthodes d'échantillonnage, de conditionnement et d'analyse - Partie 3 : Dosage de la matière particulaire totale des objets à fumer au moyen d'une machine à fumer analyti...
NF X43-267:2004 Workplace atmosphere - Measurement of chemical agents present as mixtures of airborne particles and vapour - Requirements and test methods.

SAE - SAE International, Particle zero point detection method

SAE AIR6037-2010 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development
SAE AIR6037A-2018 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development

Association of German Mechanical Engineers, Particle zero point detection method

VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3491 Blatt 2-1980 Particulate matter measurement; production methods of test aerosols; foundations and synoptics
VDI 3489 Blatt 8-1996 Particulate matter measurement - Methods for characterizing and monitoring test aerosols - Time-of-flight spectrometer
VDI 4202 Blatt 1-2010 Performance criteria for performance tests of automated ambient air measuring systems - Point-related measurement methods for gaseous and particulate air pollutants
VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
VDI 2463 Blatt 7-1982 Particulate matter measurement; measurement of mass concentration in ambient air; filter method; small filter device GS 050

YU-JUS, Particle zero point detection method

JUS K.F0.082-1989 Grains of ?iamon? and cublc boron nitrIde for bonded abrasive products. Hatbod of test of macrogrits
JUS B.D8.311-1984 Refractories. Methods of physical testing. Determ inati on of the bulk density of granular refractory materials and raws

Japanese Industrial Standards Committee (JISC), Particle zero point detection method

JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
JIS W 2923:2000 Aerospace -- Fluid systems and components -- Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
JIS B 9927-4:2022 High-efficiency filters (EPA, HEPA and ULPA) and filter media for removing particles in air -- Part 4: Test method for determining leakage of filter elements -- Scan method

Guangdong Provincial Standard of the People's Republic of China, Particle zero point detection method

DB44/T 924-2011 Test Method for Free Water and Particulate Contaminants in Distillate Fuels Visual Method

European Committee for Standardization (CEN), Particle zero point detection method

EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 1097-2:1998 Tests for Mechanical and Physical Properties of Aggregates - Part 2: Methods for the Determination of Resistance to Fragmentation Includes amendment A1:July 2006
EN 1097-5:1999 Test for Mechanical and Physical Properties of Aggregates - Part 5: Determination of the Water Content by Drying in a Ventilated Oven
EN 993-17:1998 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
EN 12341:1998 Air Quality - Determination of the PM10 Fraction of Suspended Particulate Matter - Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods
EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

HU-MSZT, Particle zero point detection method

MSZ 09 40042-1977

ES-UNE, Particle zero point detection method

UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.
UNE-EN 14902:2006/AC:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
UNE-EN 14243-2:2019 Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content

中华人民共和国国家卫生和计划生育委员会, Particle zero point detection method

WS/T 206-2001 Method for determination of inhalabnle particulate matter (PM10) in air of public place----Light scattering method

German Institute for Standardization, Particle zero point detection method

DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
DIN EN ISO 13982-2:2005-03 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004); German version EN ISO 13982-2:2004
DIN EN 14902:2005-10 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005
DIN EN 14902 Berichtigung 1:2007-01 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
DIN EN 14243-2:2019-05 Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distributions and impurities, including free steel and free textile content; German version EN 14243-2:2019
DIN EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; English version of DIN EN 14902
DIN ISO 15592-3:2011 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of wa
DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
DIN EN 12341:1999 Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods; German version EN 12341:1998
DIN EN 12341:2023-10 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German version EN 12341:2023
DIN EN 13890:2010 Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods; German version EN 13890:2009
DIN EN 14902 Berichtigung 1:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006

Professional Standard - Aerospace, Particle zero point detection method

QJ 2863-1996 Particle impact noise detection (PIND) requirements and methods for aerospace electronic components

NZ-SNZ, Particle zero point detection method

NZS 4407.3.7.1:1991 Methods of sampling and testing road aggregates Test 3.7.1 Pycnometer method for particles passing the 19 mm test sieve
NZS 4407.3.13:1991 Methods of sampling and testing road aggregates Test 3.13 The size and shape of aggregate particles

国家市场监督管理总局、中国国家标准化管理委员会, Particle zero point detection method

GB/T 36677-2018 Determination of fine particle emission rates from copying (including multi-function) devices
GB/T 37966-2019 Nanotechnologies—Measurement method for peroxidase-like activity of iron oxide nanoparticles
GB/T 37406-2019 Detection method of degree of sphericity of spherical silica for electronic packaging—Particle dynamic photoelectric projection method
GB/T 39748.11-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles

Professional Standard - Electricity, Particle zero point detection method

DL/T 2091-2020 Test method for condensable particulate matter in flue gas of coal-fired power plants dry impact bottle method

RU-GOST R, Particle zero point detection method

GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST 23.219-1984 Products wear resistance assurance. Test method for wear resistance of materials and details with hydroerosion wearing by dispersed particles
GOST 31617-2012 Implants for surgery. Method for determination of the radical-formation activity of wear particles of orthopedic materials
GOST 13496.8-1972 Mixed feeds. Methods for the determination of size of crushed particle and the content of uncrushed seed of cultured and wild plants
GOST 33538-2015 Plant protection. Methods of detection and count of lesions on grains of cereal cultures caused by Eurygaster bugs
PNST 75-2015 Automobile roads of general use. Mineral materials for the preparation of asphalt mixtures. The method of determining grain composition
PNST 74-2015 Automobile roads of general use. Materials coarse mineral for the preparation of asphalt mixtures. The method of determining of crushed grains
GOST 33589-2015 Granular activated carbon. Standard test method for the prediction of contaminant adsorption in aqueous systems using rapid small-scale column tests
GOST R 59667-2021 Atmospheric air quality. Methods for determining the fractional composition of dust by optical method. Calculation of suspended particle concentrations PM2.5, PM10 in atmospheric air based on fractional composition
PNST 76-2015 Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. The method of determining the content of silt particles by washing

Professional Standard - Non-ferrous Metal, Particle zero point detection method

YS/T 587.11-2006 Calcined coke for prebaked blocks. Testing methods. Part 11: Determination of grain stability

Society of Automotive Engineers (SAE), Particle zero point detection method

SAE ARP5376B-2010 Methods, Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids

Lithuanian Standards Office , Particle zero point detection method

LST EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)
LST EN 14902-2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
LST EN 14902-2005/AC-2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
LST EN 12341-2000 Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods

AENOR, Particle zero point detection method

UNE-EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)
UNE-EN 14902:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
UNE-EN 13936:2014 Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods

Xinjiang Provincial Standard of the People's Republic of China, Particle zero point detection method

DB65/T 4047-2017 Method for Determining Detection Points of Building Lightning Protection Devices

CU-NC, Particle zero point detection method

NC 44-03-1-1986 Ores. Granular Nickel Oxide , Nodular Nickel Oxide, and Nickel Oxide Powder. Total Cobalt and Nickel Determination Method
NC 44-03-4-1986 Ores Granular Nickel Oxide Nodular Nickel Oxide, Sinterized Nickel Oxide and Nickel Oxide Powder. Fuel-Sulfur Determination Method
NC 44-03-2-1986 Ores. Granular Nickel Oxide Nodular Nickel Oxide, Sinterized Nickel Oxide and Nickel Oxide Powder. Photometric Determination Biethod of Cobalt with Nitrose-R Salt

未注明发布机构, Particle zero point detection method

BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS EN 464:1994(1999) Protective clothing — Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles — Test method : Determination of leak - tightness of gas - tight suits (Internal Pressure Test)

Danish Standards Foundation, Particle zero point detection method

DS/EN 14902/AC:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DS/EN ISO 14720-1:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods
DS/EN 12341:1999 Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
DS/ISO 17190-11:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 11: Determination of content of respirable particles

Korean Agency for Technology and Standards (KATS), Particle zero point detection method

KS C IEC 60749-16-2006(2021) Semiconductor devices－Mechanical and climatic test methods－Part 16：Particle impact noise detection(PIND)
KS I ISO 10155:2008 Stationary source emissions-Automated monitoring of mass concentrations of particles-Performance characteristics, test methods and specifications
KS H ISO 15592-3-2013(2018) Fine-cut tobacco and smoking articles made from it－Methods of sampling, conditioning and analysis－Part 3：Determination of total particulate matter of smoking articles using a routine analytical smokin
KS P ISO 17190-11-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 11：Determination of content of respirable particles
KS P ISO 17190-11:2011 Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 11：Determination of content of respirable particles

PL-PKN, Particle zero point detection method

PN P50111-1962 Testing methods for paper indusfry produc?s. De?ermination of contamina- ?ion with i^on and copper par?ic les /J^and their compounds

Canadian General Standards Board （CGSB), Particle zero point detection method

CGSB 176.2 NO.1-96-CAN/CGSB-1996 Methodes D'Echantillonnage Et D'Essai Du Tabac Determination Du Benzo (a)Pyrene Dans La Matiere Particulaire Totale De La Fumee De Tabac

Underwriters Laboratories (UL), Particle zero point detection method

UL 2904 BULLETIN-2023 UL Standard for Safety Standard Method for Testing and Assessing Particle and Chemical Emissions from 3D Printers
UL 2904-2019 UL Standard for Safety Standard Method for Testing and Assessing Particle and Chemical Emissions from 3D Printers (First Edition)

AASHTO - American Association of State Highway and Transportation Officials, Particle zero point detection method

T 195-1967 Standard Method of Test for Determining Degree of Particle Coating of Bituminous-Aggregate Mixtures (Twentieth Edition; ASTM D2489-67(1980))

ZA-SANS, Particle zero point detection method

SANS 50405:2003 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking

工业和信息化部, Particle zero point detection method

SJ/T 11575-2016 Detection methods for volatile organic compounds and aldehydes and ketones in electronic and electrical product parts

US-CFR-file, Particle zero point detection method

CFR 40-60.46b-2014 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.46b:Compliance and performance test methods and procedures for particulate matter and nitrogen oxides.