ZH
RU
ES

Three-chip board machine

Three-chip board machine, Total:276 items.

In the international standard classification, Three-chip board machine involves: Materials for aerospace construction, Automatic controls for household use, Road vehicle systems, Insulating materials, Chipless working equipment, Semiconductor devices, Cinematography, Woodworking equipment, Textile machinery, Iron and steel products, Powder metallurgy, Non-ferrous metals, Electrical equipment for working in special conditions, Agricultural machines, implements and equipment, Radiocommunications, Construction equipment, Printed circuits and boards, Integrated circuits. Microelectronics, Data storage devices, Galvanic cells and batteries, Semiconducting materials, Products of non-ferrous metals, Fasteners, Construction materials, Piezoelectric and dielectric devices, Valves, Magnetic materials, Linear and angular measurements, Characteristics and design of machines, apparatus, equipment, Cutting tools, Ceramics, Domestic safety, Electricity. Magnetism. Electrical and magnetic measurements, Electromechanical components for electronic and telecommunications equipment.

Society of Automotive Engineers (SAE), Three-chip board machine

SAE AMS7851B-1995 FOIL, SHEET, STRIP, AND PLATE, COLUMBIUM ALLOY 10W - 2.5Zr Recrystallized
SAE AMS7851D-2013 Columbium (Niobium) Alloy Foil, Sheet, Strip and Plate, 10W 2.5Zr Recrystallized
SAE AMS4375L-2011 Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0) Annealed and Recrystallized (UNS M11311)
SAE AMS-S-18729-1998 Steel Plate, Sheet, and Strip, Alloy 4130, Aircraft Quality
SAE AMS3602-2002 Plastic Sheet and Plate, Electrical and Heat Resistant Glass Fabric Reinforced Melamine-Formaldehyde

Professional Standard - Electron, Three-chip board machine

SJ/T 31091-1994 Requirements of readiness and methods of inspection and assessment for wafer slicers
SJ/T 31092-1994 Requirements of readiness and methods of inspection and assessment for NC wafer cutting (scribing) machines
SJ/T 31065-1994 Requirements of readiness and methods of inspection and assessment for Type 24 NC wafer buffing machines

Professional Standard - Forestry, Three-chip board machine

LY/T 1014-2013 Single blade stroke circular sawing machines
LY/T 1014-1991 Saw blade reciprocating cutting machine parameters
LY/T 1015-1991 Saw blade reciprocating cutting machine precision
LY/T 1016-1991 Saw blade reciprocating panel cutting machine manufacturing and acceptance technical conditions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-chip board machine

GB/T 26741-2011 Brake linings for motor tricycle
GB/T 11254-1989 Hot rolled steel sheets for compressor valves
GB/T 10960-1989 Woodworking machines--Single blade stroke circular sawing machines--Accuracy tests
GB/T 10960-2005 Woodworking machines.Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels.Nomenclature

Group Standards of the People's Republic of China, Three-chip board machine

T/CASME 491-2023 Microcrystalline glass for smart communication phone cover
T/CI 030-2023 Multilayer?flat?weaving?loom?for?composite?preforms
T/CEEIA 247-2016 Lead-acid battery plate coating and filling equipment Part 3: Automatic paste extrusion machine

Professional Standard - Machinery, Three-chip board machine

JB 9971-1999 Pipe bender, three-roll plate bending machine Noise limits
JB/T 9971-1999 Noise limits for pipe bending machines and three-roller plate bending machines
JB/T 2449-2001 Large-size symmetric three-roll bending machine
JB/T 10924-2010 Arch line type plate bending machine with three rolls
JB/T 11195-2011 Three-roll bending machine with bottom rollers horizontal adjustment
JB/T 2249-2001 Large symmetrical three-roll plate rolling machine
JB/T 3185.3-2014 Three roller plate bending machine.Part 3: Accuracy
JB/T 1828.2-1999 Blades for plate shears Technical conditions
JB/T 3185.1-1999 Middle and small sized three-roll plate bending machine Technical conditions
JB/T 3185.2-2014 Three roller plate bending machine.Part 2: Technical requirements
JB/T 9949-2014 Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels.Parameters
JB/T 9949-1999 Accuracy of the single bladle stroke circular sawing machines
JB/T 1828.1-1999 Blades for plate shears Types and basic parameters
JB/T 8797-1998 Middle and small sized three-roll plate bending machine Types and basic parameters
JB/T 1828.2-2014 Blade of shear machine.Part 2: Technical requirements
JB/T 12294.3-2015 Three rolls plate bending machine with inclined adjustable bottom rolls.Part 3: Accuracy
JB/T 3185.1-2014 Three roller plate bending machine.Part 1: Types and parameter
JB/T 11858-2014 Building construction machinery and equipment.Blade and liner of concrete mixer
JB/T 12294.2-2015 Three rolls plate bending machine with inclined adjustable bottom rolls.Part 2: Technical specifications
JB/T 10769.2-2007 Three-column and four-point suspension centrifuges.Part 2: Specifications
JB/T 1828.1-2014 Blade of shear machine.Part 1: Type and parameter
JB/T 12294.1-2015 Three rolls plate bending machine with inclined adjustable bottom rolls.Part 1: Types and basic parameters
JB/T 10769.1-2007 Three-column and four-point suspension centrifuges.Part 1: Types and basic parameters

Professional Standard - Agriculture, Three-chip board machine

农业部1759号公告-13-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Banqiao Reed Rhizome Tablets
农业部1759号公告-5-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Chinese Medicine Banerhuang Tablets
农业部1759号公告-8-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Banhuangbaidu Tablets

Defense Logistics Agency, Three-chip board machine

DLA SMD-5962-97561 REV A-2006 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, TRIPLE 3-INPUT POSITIVE AND GATES, MONOLITHIC SILICON
DLA A-A-59500 VALID NOTICE 2-2013 Blades, Shearing Machine, Metal Squaring
DLA SMD-5962-95658 REV C-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, TRIPLE THREE-INPUT NAND GATE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA MIL-PRF-19500/253 K-2008 SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, LOW-POWER, TYPES 2N930 AND 2N930UB, JAN, JANTX, JANTXV, JANS, JANHC, AND JANKC
DLA SMD-5962-97559 REV A-2006 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, OCTAL BUFFERS AND LINE DRIVERS WITH THREE STATE OUTPUTS, MONOLITHIC SILICON
DLA DSCC-DWG-06003 REV A-2006 RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (2 WATT), STYLE 4527
DLA DSCC-DWG-06006-2006 RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (3 WATT), STYLE 4527
DLA DSCC-DWG-06007-2006 RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.1 WATT), STYLE 0603
DLA DSCC-DWG-06009-2006 RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.25 WATT), STYLE 1206
DLA DSCC-DWG-06010 REV A-2007 RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.5 WATT), STYLE 2010
DLA DSCC-DWG-06011-2006 RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (1.0 WATT), STYLE 2512
DLA DSCC-DWG-06012-2006 RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (2.0 WATT), STYLE 2816
DLA MIL-PRF-19500/694 A VALID NOTICE 1-2008 Semiconductor Device, Transistor, Plastic, NPN, Silicon, Switching, Type 2N3700UE1, JAN, JANTX, JANJ
DLA SMD-5962-96808 REV B-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT TRI-PORT UNIVERSAL BUS EXCHANGER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95544 REV A-2009 MICROCIRCUIT, LINEAR, MOTOR DRIVER, BRUSHLESS DC, THREE PHASE, MONOLITHIC SILICON
DLA SMD-5962-96521 REV B-2005 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, TRIPLE 3-INPUT NAND GATE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96523 REV B-2005 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, TRIPLE 3-INPUT AND GATE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96723 REV C-2003 MICROCIRCUIT, LINEAR, RADIATION HARDENED, TRIPLE LINE RECEIVERS, MONOLITHIC SILICON
DLA SMD-5962-97549-1997 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS W/3- STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-88591 REV C-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, INVERTING, OCTAL BUFFER AND LINE DRIVER WITH THREESTATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-95590 REV A-1996 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA MIL-M-38510/322 C VALID NOTICE 1-2008 Microcircuits, Digital, Bipolar, Low-Power Schottky TTL, Hex Bus Drivers with 3 State Outputs, Monolithic Silicon
DLA MIL-M-38510/323 D VALID NOTICE 1-2008 MICROCIRCUITS, DIGITAL, BIPOLAR, LOW-POWER SCHOTTKY TTL, QUADRUPLE BUS BUFFER GATES WITH THREE STATE OUTPUTS, MONOLITHIC SILICON
DLA MIL-M-38510/324 D VALID NOTICE 1-2008 MICROCIRCUITS, DIGITAL, BIPOLAR, LOW-POWER SCHOTTKY TTL, OCTAL BUFFER GATES WITH THREE STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-96819 REV A-1997 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, OCTAL BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95721 REV B-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED HIGH SPEED CMOS, TRIPLE 3-INPUT AND GATE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95734 REV B-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED HIGH SPEED CMOS, TRIPLE 3-INPUT NOR GATE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95765 REV B-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED HIGH SPEED CMOS, TRIPLE 3-INPUT NAND GATE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-91724 REV A-2008 MICROCIRCUIT, DIGITAL, BICMOS OCTAL BUS TRANSCEIVERS AND REGISTERS WITH THREESTATE OUTPUTS, TTL COMPATIBLE, MONOLITHIC SILICON
DLA SMD-5962-89928 REV B-2007 MICROCIRCUIT, LINEAR, TRIPLE 8-BIT, D/A CONVERTER WITH A 256 X 24 COLOR PALETTE, MONOLITHIC SILICON
DLA SMD-5962-94748 REV A-2009 MICROCIRCUIT, LINEAR, 135 MHz TRIPLE 8-BIT D/A CONVERTERS WITH 256 WORD COLOR PALLETTE RAM, MONOLITHIC SILICON
DLA SMD-5962-95544-1995 MICROCIRCUIT, LINEAR, MOTOR DRIVER, BRUSHLESS DC, THREE PHASE, MONOLITHIC SILICON
DLA SMD-5962-96529 REV B-2005 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, TRIPLE 3-INPUT NOR GATE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-94748-1994 MICROCIRCUIT, LINEAR, 135 MHZ TRIPLE 8-BIT D/A CONVERTERS WITH 256 WORD COLOR PALETTE RAM, MONOLITHIC SILICON
DLA SMD-5962-95614 REV A-2008 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, SCAN TEST DEVICE WITH 18-BIT BUS TRANSCEIVER, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96863 REV B-1997 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS QUADRUPLE BUS BUFFER GATE WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96869 REV B-1997 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS QUADRUPLE BUS BUFFER GATE WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96870 REV B-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 18-BIT UNIVERSAL BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95619 REV B-2002 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 16-BIT BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95620 REV D-2003 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 16-BIT TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95661 REV C-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, OCTAL TRANSPARENT LATCH WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96806 REV B-1997 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, OCTAL BUFFER/DRIVER WITH INVERTING THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95816 REV A-2007 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 16-BIT TRANSCEIVER/REGISTER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96698-1996 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, SCAN TEST DEVICE WITH 18-BIT TRANSCEIVER/REGISTER, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95841 REV A-2007 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT BUS TRANSCEIVER AND REGISTER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96715 REV C-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED ADVANCED CMOS, NONINVERTING QUAD BUFFER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96725 REV D-1999 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, OCTAL TRANSPARENT LATCH WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96768 REV A-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, QUADRUPLE BUS BUFFER GATE WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96867 REV B-1997 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS OCTAL TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96878 REV B-1997 MICROCIRCUITS, DIGITAL, BIPOLAR, TTL, HEX BUFFERS/ LINE DRIVERS WITH 3-STATE OUTPUTS WITH 2 INDEPENDENT OR 2 DEPENDENT INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96880 REV A-2003 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 16-BIT BUFFER/DRIVER WITH INVERTING THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-97527 REV A-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 10-BIT BUS-EXCHANGE SWITCH WITH THREE STATE OUTPUTS AND LEVEL SHIFTING, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95614-1995 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, SCAN TEST DEVICE WITH 18-BIT UNIVERSAL BUS TRANSCEIVER, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96697-1996 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 18-BIT BUS-EXCHANGE SWITCH WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96718 REV C-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED ADVANCED CMOS, NONINVERTING OCTAL BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96719 REV E-2005 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, NONINVERTING OCTAL BIDIRECTIONAL BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96721 REV C-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, ERROR DETECTION AND CORRECTION CIRCUIT WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96746 REV A-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 8-BIT TO 9-BIT PARITY BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96775 REV A-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT INCIDENT-WAVE SWITCHING BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96782 REV B-2003 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, OCTAL BUFFER/DRIVER WITH NONINVERTING THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-96783 REV B-1997 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, OCTAL BUFFER/DRIVER WITH NONINVERTING THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96849 REV A-2000 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3- V 16-BIT REGISTERED TRANSCEIVER WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95747 REV C-1999 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, OCTAL TRANSPARENT LATCH WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95836-1995 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA MIL-PRF-19500/394 M-2008 SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, POWER SWITCHING, TYPES: 2N4150, 2N5237, 2N5238, 2N4150S, 2N5237S, AND 2N5238S, JAN, JANTX, JANTXV, JANS, JANSM, JANSD, JANSP, JANSL, JANSR, JANSF, JANSG, JANSH, JANHCA, JANHCB, JANKCA, JANKCB, JANKCM, JANKC
DLA SMD-5962-90870 REV A-2006 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, OCTAL REGISTERED TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95642 REV C-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-VOLT OCTAL BUS TRANSCEIVER WITH BUS HOLD, THREE-STATE OUTPUTS, AND TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95662 REV B-1998 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, OCTAL D FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96769 REV A-1998 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 10-BIT BUS-INTERFACE D-TYPE LATCH WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96773 REV C-2005 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-96810 REV B-1998 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-VOLT 16-BIT TRANSPARENT D-TYPE LATCH WITH BUS HOLD, THREE-STATE OUTPUTS, AND TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96829 REV A-2003 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL BUFFER/LINE DRIVER WITH NONINVERTING THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95712 REV A-2007 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 9-BIT BUS INTERFACE D-TYPE LATCH WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96865 REV B-1997 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95746 REV B-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED HIGH SPEED CMOS, 8-BIT UNIVERSAL SHIFT REGISTER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-97529-1998 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, OCTAL BUS TRANSCEIVER AND REGISTER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95772 REV B-2004 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, INVERTING OCTAL BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95835-1995 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, OCTAL TRANSPARENT D-TYPE LATCH WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95576 REV A-1996 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 36-BIT UNIVERSAL BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95577 REV A-1996 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 36-BIT BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95844 REV F-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-VOLT NONINVERTING OCTAL BUFFER/DRIVER WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96717 REV E-2005 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, INVERTING OCTAL BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96726 REV D-1999 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, NONINVERTING OCTAL BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96811 REV A-1999 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-VOLT SCAN TEST DEVICE WITH 18-BIT UNIVERSAL BUS TRANSCEIVER, WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95776 REV B-2004 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, INVERTING OCTAL BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-89722-1989 MICROCIRCUIT, DIGITAL, ADVANCED SCHOTTKY, TTL, OCTAL 30-OHM TRANSMISSION LINE/BACKPLANE TRANSCEIVERS NINV (OPEN COLLECTOR WITH ENABLE WITH THREE STATE), MONOLITHIC SILICON
DLA SMD-5962-94718 REV B-1997 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, OCTAL BUFFER/DRIVER WITH NONINVERTING THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95578 REV A-1996 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 36-BIT REGISTERED BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95744 REV C-1999 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, NON-INVERTING OCTAL BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95751 REV B-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED HIGH SPEED CMOS, NON-INVERTING OCTAL BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95759 REV B-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED HIGH SPEED CMOS, NONINVERTING OCTAL BUS TRANSCEIVER/REGISTER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95775 REV A-1998 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, NON-INVERTING HEX BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95831 REV D-2007 MICROCIRCUIT, DIGITAL, ADVANCED BICMOS, 3.3 VOLT OCTAL TRANSPARENT D-TYPE LATCH WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95832 REV C-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3- VOLT OCTAL EDGE-TRIGGERED D-TYPE FLIP FLOP WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-92272 REV D-2008 MICROCIRCUIT, DIGITAL, FAST CMOS, 16-BIT BIDIRECTIONAL TRANSCEIVER WITH SERIES RESISTOR AND THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON
DLA SMD-5962-95606 REV A-2007 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, OCTAL TRANSCEIVER/LINE DRIVER WITH 25 OHM SERIES RESISTOR AND THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96809 REV B-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3 VOLT 16-BIT BUFFER/DRIVER WITH BUS HOLD AND 22 OHM SERIES RESISTORS AND THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95748 REV C-1999 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, OCTAL D-TYPE POSITIVE EDGE-TRIGGERED FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

林业部, Three-chip board machine

LY 1014-1991 Saw blade reciprocating panel cutting machine parameters
LY 1015-1991 Saw blade reciprocating cutting machine precision
LY 1016-1991 Technical conditions for manufacturing and acceptance of saw blade reciprocating panel cutting machines

International Organization for Standardization (ISO), Three-chip board machine

ISO 1780:1984 Cinematography; Motion-picture camera cartridge, 8 mm Type S Model I; Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness; Dimensions and specifications
ISO 9558:1989 Woodworking machines; veneer slicing machines; nomenclature
ISO 7918:1995 Forestry machinery - Portable brush-cutters and grass-trimmers - Cutting attachment guard dimensions
ISO 8380:1985 Forestry machinery; Portable brush-saws; Circular saw-blade guard; Strength
ISO 7918:1985 Forestry machinery; Portable brush-saws; Circular saw-blade guard; Dimensions
ISO 7958:1987 Woodworking machines; Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels; Nomenclature and acceptance conditions
ISO 367:1976 Textile machinery and accessories — Metal reeds with plate baulk — Dimensions

British Standards Institution (BSI), Three-chip board machine

BS 4361-33:1990 Woodworking machines. Nomenclature for veneer slicing machines
BS EN 485-2:2016+A1:2018 Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
BS 4361-18:1989 Woodworking machines. Specification for single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels
BS 9612 N007:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature co
BS 9612 N006:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temp
BS 9612 N019:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temp
BS 9612 N018:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-te
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN 62047-16:2015 Semiconductor devices. Micro-electromechanical devices. Test methods for determining residual stresses of MEMS films Wafer curvature and cantilever beam deflection methods
BS EN 16002:2018 Flexible sheets for waterproofing. Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
BS 3182-4:1978 Textile machinery and accessories: healds, heald frames and reeds. Specification for metal reeds with plate baulk: dimensions
BS 3182-5:1978 Textile machinery and accessories: healds, heald frames and reeds. Specification for metal reeds with double-spring baulk: dimensions
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending

Professional Standard - Ferrous Metallurgy, Three-chip board machine

YB/T 4070.1-2006 Technical specifications of blade for metal shearing. blades for plate shearing machine and clipping machine
YB/T 4070.1-1992 Specifications for Metal Shearing Blades Shears and Shearing Machine Blades

RU-GOST R, Three-chip board machine

GOST 10664-1982 Three-and four-roller sheet bending machines. Parameters
GOST 17728-1980 Thre- and four-roller sheet bending machines. Normes of accuracy
GOST 158-1974 Knife sections ledger plates and knife backs for cutter bars of agricultural machines. Specifications

SE-SIS, Three-chip board machine

SIS SMS 2743-1969 Industrial wheels. Swivel castors with triangul?r top plate

CZ-CSN, Three-chip board machine

CSN 21 0316-1984 Forming machines. Three-roll and four-roll bending machines. Geometrical precision
CSN 21 0385-1986 Forming machines. Three-roll and four-roll bending machines. Testing methods

Military Standard of the People's Republic of China-General Armament Department, Three-chip board machine

GJB 8359-2015 Specification for medium-thick film S0I wafers for microelectromechanical systems and power devices
GJB 10308-2021 Specification for precision castings of equiaxed superalloy turbine guide blades for aeroengines
GJB 10309-2021 Specification for precision castings of aeroengine equiaxed superalloy turbine blades
GJB 10307-2021 Specification for precision castings of directional columnar superalloy turbine blades for aeroengines
GJB 10306-2021 Specification for precision castings of oriented cylindrical superalloy turbine guide blades for aeroengines
GJB 945A-2020 Specification for Pt75Ir alloy plates and sheets for aircraft engine ignition device contacts

VN-TCVN, Three-chip board machine

TCVN 4751-1989 Three-and four-roller sheet bending machines.Normes of accuracy

UNKNOWN, Three-chip board machine

Korean Agency for Technology and Standards (KATS), Three-chip board machine

KS B 4104-2014 Veneer slicers — Test and inspection methods
KS B 4104-2007 Veneer slicers-Test and inspection methods
KS B 4104-2014(2020) Veneer slicers — Test and inspection methods
KS B 4104-1986 Veneer slicers-Test and inspection methods
KS D ISO 6361-2:2012 Wrought aluminium and aluminium alloys sheets, strips and plates-Part 2:Mechanical properties
KS D ISO 6361-2:2013 Wrought aluminium and aluminium alloys sheets, strips and plates-Part 2:Mechanical properties

Professional Standard - Aerospace, Three-chip board machine

QJ/Z 131.75-1984 Machine Tool Fixture Parts Process Card Atlas Press Plate Process Card
QJ/Z 131.77-1984 Machine Tool Fixture Parts Process Card Atlas Press Plate Process Card
QJ/Z 131.45-1984 Machine Tool Fixture Parts Process Card Atlas Guide Plate Process Card
QJ/Z 131.46-1984 Machine Tool Fixture Parts Process Card Atlas Guide Plate Process Card
QJ 1000.95-1986 Machine tool fixture parts and components process card guide
QJ 1000.71-1986 Machine tool fixture parts and components process card press plate
QJ 1000.128-1986 Machine tool fixture parts and components process card support plate
QJ/Z 131.74-1984 Machine Tool Fixture Parts Process Card Atlas Sliding Flat Head Press Plate Process Card
QJ/Z 131.76-1984 Machine Tool Fixture Parts Process Card Atlas Sliding Elbow Press Plate Process Card
QJ 1000.127-1986 Machine tool fixture parts and components process card support plate
QJ 1000.53-1986 Machine tool fixture parts and components process card direct pressure plate
QJ 1000.49-1986 Machine tool fixture parts and components process card flat plate
QJ 1000.41-1986 Machine tool fixture parts and components process card moving platen
QJ 1000.56-1986 Two-way pressure plate for machine tool fixture parts and components process card
QJ 1000.51-1986 Machine tool fixture parts and components process card V-shaped pressure plate
QJ 1000.50-1986 Machine tool fixture parts and components process card elbow pressure plate
QJ 1000.55-1986 Machine tool fixture parts and components process card rotary platen
QJ 1000.62-1986 Machine tool fixture parts and components process card hook press plate
QJ 1000.42-1986 Machine tool fixture parts and components process card rotating platen
QJ 1000.52-1986 Machine tool fixture parts and components process card saddle platen
QJ 1000.54-1986 Machine Tool Fixture Parts and Components Process Card Hinge Press Plate
QJ 1000.44-1986 Machine tool fixture parts and components process card rotating bending plate
QJ 1000.43-1986 Machine tool fixture parts and components process card mobile bending platen
QJ 1000.153-1986 Backing plate for machine tool fixture parts and components process card screw
QJ 1000.46-1986 Machine tool fixture parts and components process card rotating wide head platen
QJ 1000.45-1986 Machine tool fixture parts and components process card mobile wide head platen
QJ 1000.47-1986 Press plate for machine tool fixture parts and components process card eccentric wheel
QJ 1000.61-1986 Backing plate for machine tool fixture parts and components process card eccentric wheel
QJ 1000.63-1986 Machine tool fixture parts and components process card hook pressure plate (combination) type A
QJ 1000.65-1986 Machine tool fixture parts and components process card hook pressure plate (combination) C type
QJ 1000.69-1986 Machine tool fixture parts and components process card end hook-shaped pressure plate (combination)
QJ 1000.64-1986 Machine tool fixture parts and components process card hook pressure plate (combination) type B
QJ 1000.72-1986 Machine tool fixture parts and components Process card side hook pressure plate (combination)
QJ 1000.67-1986 Machine tool fixture parts and components process card vertical hook platen (combination)
QJ 1000.48-1986 Wide head pressure plate for machine tool fixture parts and components process card eccentric wheel

GM North America, Three-chip board machine

GM 9984195-2015 Sealer - Preformed, Floor Pan Patch (Issue 2)

Japanese Industrial Standards Committee (JISC), Three-chip board machine

JIS H 7152:1996 Methods of measurement of the magnetic properties of amorphous metals by means of a single sheet tester
JIS C 6524:1995 Prepreg for multilayer printed wiring boards -- Bismaleimide/Triazine/Epoxide resin-impregnated glass cloth
JIS C 6492:1998 Base materials for printed circuits -- Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)

European Committee for Standardization (CEN), Three-chip board machine

prEN 412-1992 Protective aprons for use with hand knives

Professional Standard - Coal, Three-chip board machine

MT/T 478-1996 Flameproof……in YBS series scraper conveyor Three-phase asynchronous motors
MT 478-1996 Flameproof three-phase asynchronous motor for YBS series scraper conveyor

IN-BIS, Three-chip board machine

IS 12099-1987

AT-ON, Three-chip board machine

ONORM M 3415 Teil.1-1976 Plates, sheets and Strips of wrought copper and copper alloys; mechanical properties

Danish Standards Foundation, Three-chip board machine

DS/ISO 7918:1986 Forestry machinery. Portable brush-saws. Saw-blade guard. Dimensions
DS/ISO 8380:1986 Forestry machinery. Portable brush-saws. Saw-blade guard. Strength

Association Francaise de Normalisation, Three-chip board machine

NF EN 14951:2006 Lambris et bardages en bois massif feuillus - Lames profilées usinées
NF E64-067:2012 Woodworking machines - Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels - Nomenclature and acceptance conditions
NF F62-011-2:1992 Railway rolling stock. Functional general requirements. Transistorized ballasts. Collection of particular leaves.
NF C96-022-19/A1*NF EN 60749-19/A1:2011 Semiconductor devices - Mechanical and climatic test methods - Part 19 : die shear strength
NF P82-215:1980 Electric or electrically operated hoist. Safety rules for the construction and installation of group III hoists serving a higher level by the opening of a trap door.
NF C96-050-16*NF EN 62047-16:2015 Semiconductor devices - Micro-electromechanical devices - Part 16 : test methods for determining residual stresses of MEMS films - Wafer curvature and cantilever beam deflection methods

RO-ASRO, Three-chip board machine

STAS SR EN 485-2-1995 Aluminium and aluminium alloys. Sheet, strip and plate. Part 2: Mechanical properties
STAS SR EN 10113-3-1995 Hot rolled products in weldable fine grain structural steels -Part 3: Delivery conditions for thermomechanical rolled steels
STAS 7/2-1974 STARGH Determination of moisture content (Oven-drying method)
SR ISO 366-2:1995 Textile machinery and accessories - Reeds - Part 2: Metal reeds with plate baulk - Dimensions and designation

API - American Petroleum Institute, Three-chip board machine

API SPEC 2W-1993 Specification for Steel Plates for Offshore Structures@ Produced by Thermo-Mechanical Control Processing (TMCP) (THIRD EDITION)

PL-PKN, Three-chip board machine

PN D56218-1971 Woodworking machines Multi-blade circular sawing machines for panel sizing Accuracy tests
PN G46691-1972 Min? scraper corweyors two-strand and ?hrees?rand-chain Main parame?ers and dimensions

German Institute for Standardization, Three-chip board machine

DIN 50442-1:1981 Testing of semi-conductive inorganic materials; determination of the surface structure of circular monocrystalline semi-conductive slices; as-cut and lapped slices
DIN ISO 366-2:2010-07 Textile machinery and accessories - Reeds - Part 2: Dimensions and designation of metal reeds with plate baulk (ISO 366-2:2009)
DIN EN 10280:2001 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester; German version EN 10280:2001
DIN 4003-80:2011 Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies
DIN EN 485-2:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; German version EN 485-2:2016
DIN EN 485-2:2013 Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; German version EN 485-2:2013
DIN EN 60749-19:2011 Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength (IEC 60749-19:2003 + A1:2010); German version EN 60749-19:2003 + A1:2010

IT-UNI, Three-chip board machine

HU-MSZT, Three-chip board machine

MSZ 705/2-1969

未注明发布机构, Three-chip board machine

DIN EN 485-2:2004 Aluminum and aluminum alloys – Strips, sheets and plates – Part 2: Mechanical properties
DIN EN 485-2 Berichtigung 1:2006 Aluminum and aluminum alloys – Strips, sheets and plates – Part 2: Mechanical properties

United States Navy, Three-chip board machine

NAVY QPL-7099-12-1998 TERMINALS; LUG AND SPLICE, CRIMP STYLE ALUMINUM FOR ALUMINUM AIRCRAFT WIRE

American Society for Testing and Materials (ASTM), Three-chip board machine

ASTM D6381-00 Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance
ASTM D6381-00a Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance
ASTM F950-98 Standard Test Method for Measuring the Depth of Crystal Damage of a Mechanically Worked Silicon Slice Surface by Angle Polishing and Defect Etching

Association of German Mechanical Engineers, Three-chip board machine

VDI/VDE 2617 Blatt 5.1-2011 Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with ball plates

International Electrotechnical Commission (IEC), Three-chip board machine

IEC 60404-17:2021 Magnetic materials - Part 17: Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor
IEC 60404-16:2018/COR1:2018 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
IEC 60404-8-5:2020 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
IEC 60404-9:2018 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
IEC 60404-3:2022 RLV Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
IEC 60404-3:2022 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
IEC 62047-16:2015 Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses of MEMS films - Wafer curvature and cantilever beam deflection methods

National Aeronautics and Space Administration (NASA), Three-chip board machine

NASA-TN-D-8373-1976 Low-speed wind-tunnel investigation of flight spoilers as trailing-vortex-alleviation devices on an extended-range wide-body tri-jet airplane model

Canadian Standards Association (CSA), Three-chip board machine

CAN/CSA-E60335-2-10-2015 Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines (Third Edition)

Underwriters Laboratories (UL), Three-chip board machine

UL 1703 CRD-2010 UL Standard for Safety Flat-Plate Photovoltaic Modules and Panels - Section / Paragraph Reference: 41.1 Subject: Mechanical Loading Test Deflection Parameter (Edition 3: June 30@ 2004)

European Committee for Electrotechnical Standardization（CENELEC）, Three-chip board machine

EN 62047-16:2015 Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses of MEMS films – Wafer curvature and cantilever beam deflection methods