ZH
RU
ES

Cadmium Environmental Standard Samples

Cadmium Environmental Standard Samples, Total:369 items.

In the international standard classification, Cadmium Environmental Standard Samples involves: Vocabularies, Environmental protection, Footwear, Water quality, Soil quality. Pedology, Freight distribution of goods, Plastics, Air quality, Electrical engineering in general, Electronic components in general, Microprocessor systems, Raw materials for rubber and plastics, Products of the textile industry, Paints and varnishes, Standardization. General rules, Pulps, Paper and board, Mechanical testing, Ceramics, Test conditions and procedures in general, Wastes, Organic chemicals, Products of non-ferrous metals, Non-ferrous metals, Rubber, Farming and forestry, INFORMATION TECHNOLOGY. OFFICE MACHINES, Kitchen equipment, Fasteners for aerospace construction, Electrical accessories, Shipbuilding and marine structures in general, Rubber and plastics products, Materials for aerospace construction, Construction materials, Measurement of fluid flow, Environmental testing, Terminology (principles and coordination), Sacks. Bags, Medical equipment, Wood-based panels, Magnetic materials, Coatings and related processes used in aerospace industry, Inks. Printing inks.

Professional Standard - Environmental Protection, Cadmium Environmental Standard Samples

HJ 173-2017 Environmental standard sample research copy technical specification
HJ/T 173-2005 Technical specifications for development of environmental reference materials
HJ/T 332-2006 Environmental quality evaluation standards for farmland of edible agricultural products
HJ 332-2006 Farmland environmental quality evaluation standards for edible agricultural products
HJ 2505~2507-2011 Three standards including "Technical Requirements for Environmental Labeling Products Mobile Hard Disk"
HJ/T 368-2007 Technical requirement for environmental protection products. Special orifice flowmeters for total suspended particulate sampler calibration

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cadmium Environmental Standard Samples

GB/T 17221-1998 Discriminant standard for health hazard area caused by environmental cadmium pollution
GB/T 22050-2008 Footwear.Sampling location,preparation and duration of conditioning of samples and test pieces
GB/Z 32582-2016 Environmental standardization of electrical and electronic products and systems Standardization of terminology for environmental factors
GB/T 2918-1998 Plastics--Standard atmospheres for conditioning and testing
GB/T 2918-2018 Standard environment for conditioning and testing of plastic specimens
GB/T 2941-1991 Rubber-Standard temperatures,humidities and times for the conditioning environmental and testing of test pieces
GB/T 20877-2007 Environmental aspects Inclusion in electrotechnical product standards
GB/T 20000.5-2004 Guide for standardization Part 5:Environmental aspects for their inclusion in product standards
GB 16487.3-1996 Environmental protection control standard for imported scrap material--Scrap wood and wooden products as raw material
GB/T 20877-2016 Guidelines for Introducing Environmental Factors into Electrical and Electronic Product Standards
GB 16487.5-1996 Environmcntal protcction control standard for imported scrap material--Scrap cotton and cloth as raw material
GB/Z 22695-2008 Guidelines for the addition of environmental aspects in product standards specific to electrical accessories
GB/T 20002.3-2014 Drafting for special aspects in standards.Part 3:Addressing environmental issues in product standards
GB 16487.3-2005 Environmental protection control standard for imported solid wastes as raw materials.Wood and wood articles wastes

YU-JUS, Cadmium Environmental Standard Samples

JUS D.A8.030-1983 Standard atmosphere for conditioning of samples and test pieces of wood and vvood-based boards

FI-SFS, Cadmium Environmental Standard Samples

SFS 2600-1970

American Society for Testing and Materials (ASTM), Cadmium Environmental Standard Samples

ASTM D6911-03 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
ASTM D6911-15 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
ASTM D6911-03(2010) Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
ASTM D1357-95(2000) Standard Practice for Planning the Sampling of the Ambient Atmosphere
ASTM D1357-95(2005) Standard Practice for Planning the Sampling of the Ambient Atmosphere
ASTM D1357-95(2019) Standard Practice for Planning the Sampling of the Ambient Atmosphere
ASTM D1357-95(2011) Standard Practice for Planning the Sampling of the Ambient Atmosphere
ASTM D6051-96 Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM D1654-08(2016) Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D1654-92(2000) Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D1654-08(2016)e1 Standard test method for evaluating coatings or coating samples for corrosive environments
ASTM C1323-96(2001)e1 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM C1323-96(2001) Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM C1323-10 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM D6582-00(2005)e1 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D6051-96(2001) Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM D6051-96(2006) Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM D6582-00 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D6582-00(2005) Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D6001-96e1 Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations
ASTM D3437-10 Standard Practice for Sampling and Handling Liquid Cyclic Products
ASTM D3437-99 Standard Practice for Sampling and Handling Liquid Cyclic Products
ASTM D6051-15(2023) Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM D6051-15 Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM D6282-98 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM D6001-96(2002) Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations
ASTM D6282-98(2005) Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM D6001/D6001M-20 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
ASTM D6282/D6282M-14 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM C1323-96 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM D6001-05 Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations
ASTM D1654-05 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D1654-08 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D6640-01 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D6640-01(2005) Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D6640-01(2010) Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D6169-98 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
ASTM D6169-98(2005) Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
ASTM D3437-15(2022) Standard Practice for Sampling and Handling Liquid Cyclic Products
ASTM D3437-15 Standard Practice for Sampling and Handling Liquid Cyclic Products
ASTM F2916-11 Standard Practice for Environmental Impact Analysis of Commercial Food Service Equipment
ASTM F2916-19 Standard Practice for Environmental Impact Analysis of Commercial Food Service Equipment
ASTM C1512-01 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM D1914-95(1999) Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis Atmospheres
ASTM D1914-95(2022) Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D1914-95(2014) Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM B928/B928M-15(2023) Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
ASTM B928/B928M-15(2023)e1 Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
ASTM D4204-00 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D4204-12 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D4204-16 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D4204-16(2023) Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D4532-10 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
ASTM C1323-16 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM E1234-01 Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
ASTM E1234-12(2020) Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
ASTM E1991-98 Standard Guide for Environmental Life Cycle Assessment of Building Materials/Products
ASTM B928/B928M-04a Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service
ASTM E1991-05 Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products
ASTM B928/B928M-15 Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
ASTM D6327-10 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM C1512-07 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM D6640-01(2015) Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D4532-15 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
ASTM D4204-06 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM C1323-22 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM C1512-10(2015) Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM C1512-10 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM C1512-10(2020) Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM F1278-96(2008) Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
ASTM F1278-96(2021)e1 Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
ASTM D6311-98(2003) Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM D6169/D6169M-21 Standard Guide for Selection of Subsurface Soil and Rock Sampling Devices for Environmental and Geotechnical Investigations
ASTM D7574-09 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM E1192-23 Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians
ASTM E1192-97(2014) Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians
ASTM C1512-10(2015)e1 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM F2503-23 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
ASTM F2503-23e1 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
ASTM D6602-03b Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6602-03 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6602-02 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM D1171-16 Standard Test Method for Rubber Deterioration&x2014;Surface Ozone Cracking Outdoors (Triangular Specimens)
ASTM D6169/D6169M-13 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
ASTM D2559-00 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D2559-03 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D2559-04 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D2559-09 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D2559-10a Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM F1278-96(2015) Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
ASTM F2503-20 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
ASTM D2559-12ae1 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D6640-21 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D7075-04 Standard Practice for Evaluating and Reporting Environmental Performance of Biobased Products
ASTM D6670-13 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
ASTM D6311-98 Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM D6311-98(2022) Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM D6311-98(2014) Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM D5875/D5875M-13 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D7859-13e1 Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
ASTM D5116-10 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
ASTM A596/A596M-95(1999) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
ASTM D6602-00 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6602-03a Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6311-98(2009) Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM D6602-13(2018) Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6602-03be1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D5116-06 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
ASTM D5116-97 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
ASTM F1926/F1926M-10 Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings
ASTM C1773-21 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM C1773-13 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM D6007-02(2008) Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
ASTM F1926/F1926M-08 Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings
ASTM C1773-17 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM D5116-17 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
ASTM E2144-01 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ASTM E2144-01(2007) Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6602-13(2022) Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM F2037-00 Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments
ASTM C582-95 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
ASTM F2037-00(2006) Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments
ASTM C582-09(2016) Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

RU-GOST R, Cadmium Environmental Standard Samples

GOST 12423-2013 Plastics. Standard atmospheres for conditioning and testing specimens
GOST R ISO 139-2007 Textiles. Standard atmospheres for conditioning and testing
GOST R 56268-2014 Guide for addressing environmental issues in product standards
GOST R 57328-2016 Environmental management. Inclusion in electrotechnical product standards

RO-ASRO, Cadmium Environmental Standard Samples

STAS 5794-1980 PLASTICS staudard atnlospheres for conditioning and testing

Standard Association of Australia （SAA）, Cadmium Environmental Standard Samples

HB 207.4-2005 Environmental management - Inclusion of environmental aspects in electrotechnical product standards

Underwriters Laboratories (UL), Cadmium Environmental Standard Samples

UL 2744 BULLETIN-2018 UL Standard for Safety of Products in Smart Environments

American National Standards Institute （ANSI), Cadmium Environmental Standard Samples

ANSI/IEEE 1680:2009 Standard for Environmental Assessment of Electronic Products
ANSI/ISEA 104-1998(R2009) American National Standard for Air Sampling Devices - Diffusive Type for Gases and Vapors in Working Environments

CU-NC, Cadmium Environmental Standard Samples

NC 93-02-203-1986 Standards System for Environmental Protection. Atmosphere General Requeriments for Air Sampling
NC 93-02-105-1985 Standards System for Environmental Protection. Atmosphere. Instruments for Air Sampling in Human Settlements. General Technical Requirements
NC 93-03-102-1987 Standards System for Environment Protection. Soils. General Requirements for Sampling
NC 93-01-215-1987 Standards System for Environment Protection. Drinking Water. Determination of Metamidophus (Tamarón)

Professional Standard - Agriculture, Cadmium Environmental Standard Samples

GB 2918-1982 Standard environment for conditioning and testing of plastic specimens

Association Francaise de Normalisation, Cadmium Environmental Standard Samples

NF EN 15841:2010 Qualité de l'air ambiant - Méthode normalisée pour la détermination des dépôts d'arsenic, de cadmium, de nickel et de plomb
NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
NF EN 14902:2005 Qualité de l'air ambiant - Méthode normalisée pour la mesure du plomb, cadmium, de l'arsenic et du nickel dans la fraction MP10 de la matière particulaire en suspension
FD P16-928*FD CEN/TR 16928:2017 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering
NF EN 62542:2014 Normalisation environnementale pour les produits et les systèmes électriques et électroniques - Glossaire des termes
NF A50-122*NF EN 15530:2008 Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards.
NF C05-102*NF EN 62542:2014 Environmental standardization for electrical and electronic products and systems - Glossary of terms
FD CEN/TR 16928:2017 Lignes directrices pour la mise en oeuvre des aspects environnementaux dans les normes de produits et les normes de systèmes du domaine de la technique des eaux résiduaires
NF L24-108*NF EN 3112:1995 Aerospace series. Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated. Classification : 900 MPa (at ambient temperature) / 235 degrees celsius.
XP X 43-053-1997 AIR QUALITY. AMBIENT AIR. INSTRUCTION HANDBOOK FOR THE CALIBRATION OF ATMOSPHERIC POLLUANT ANALYZERS AND SAMPLERS. SAMPLING. MEASURING STATION AND GAS FLOW RATES.
NF L24-521*NF EN 3227:2010 Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread - Classification : 1 100 MPa (at ambient temperature) /2 35oC
NF L22-015*NF EN 4851:2022 Aerospace series - Screw, 100o countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
NF C74-237*NF EN 62570:2015 Standard practice for marking medical devices and other items for safety in the magnetic resonance environement
NF L24-152:2010 Aerospace series - Screws 100 o countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Clasification : 1 100 MPa (at ambient temperature)/235 oC.
NF L24-152*NF EN 4163:2016 Aerospace series - Screws 100o countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
NF L24-184*NF EN 2886:1996 Aerospace series. Screws, pan head, offset cricuform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 900 MPa (at ambient temperature) / 235 degrees celsius.
NF L24-185*NF EN 2897:1996 Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature) / 235 degrees celsius.
NF L22-014*NF EN 4850:2022 Aerospace series - Screw, 100o countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
NF EN 14662-3:2015 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 3 : prélèvement par pompage automatique avec analyse chromatographique en phase gazeuse sur site
NF EN 14662-5:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration de benzène - Partie 5 : prélèvement par diffusion suivi d'une désorption au solvant et d'une chromatographie gazeuse
NF EN 14662-2:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 2 : prélèvement par pompage suivi d'une désorption au solvant et d'une méthode de chromatographie en phase gazeuse
NF EN 14662-1:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 1 : échantillonnage par pompage suivi d'une désorption thermique et d'une méthode chromatographie en phase gazeuse
NF X43-029-3:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography.
NF X43-029-2*NF EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : pumped sampling followed by solvent desorption and gas chromatography
NF X43-029-5*NF EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5 : diffusive sampling followed by solvent desorption and gas chromatography.

Institute of Electrical and Electronics Engineers (IEEE), Cadmium Environmental Standard Samples

IEEE Unapproved Draft Std P1680/D4D6, Aug 2009 Draft Standard for Environmental Assessment of Electronic Products
IEEE Std 1680-2009 IEEE Standard for Environmental Assessment of Electronic Products - Redline
IEEE Unapproved Draft Std P1680/D4, Jan 2009 IEEE Draft Standard for Environmental Assessment of Electronic Products
IEEE Unapproved Draft Std P1680/D5, Jun 2009 IEEE Draft Standard for Environmental Assessment of Electronic Products

Korean Agency for Technology and Standards (KATS), Cadmium Environmental Standard Samples

KS C 0921-2014(2019) Environmental aspects — Inclusion in electrotechnical product standards
KS A ISO GUIDE 64-2010(2020) Guide for addressing environmental issues in product standards
KS A ISO GUIDE 64:2010 Guide for addressing environmental issues in product standards
KS C IEC 62542:2021 Environmental standardization for electrical and electronic products and systems — Glossary of terms
KS C IEC TR 63212:2022 Harmonization of environmental performance criteria for electrical and electronic products — Feasibility study
KS I ISO 14049:2010 Environmental management-Life cycle assessment-Examples of application of KS I ISO 14044 to goal and scope definition and inventory analysis
KS I ISO 14049:2014 Environmental management — Life cycle assessment — Illustrative examples on how to apply KS I ISO 14044 to goal and scope definition and inventory analysis
KS C IEC 60050-904:2021 International Electrotechnical Vocabulary — Part 904:Environmental standardization for electrical and electronic products and systems

European Committee for Standardization (CEN), Cadmium Environmental Standard Samples

EN 15841:2009 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
EN 15530:2008 Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards
PD CEN/TR 16928:2016 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering
EN 2859:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1100 MPa (at ambient temperature) / 235 °C
EN 2859:1995 Aerospace Series - Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated - Classification: 1100 MPa (at Ambient Temperature)/235 Degrees C
CEN/TR 16928:2016 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering
EN 3228:2010 Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 °C
FprEN 4851-2021 Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
EN 3230:2001 Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
EN 4162:2009 Aerospace series - Screws 100 Degrees countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - 1 100 MPa (at ambient temperature) / 235 Degree C
EN 2885:1996 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
EN 3303:1997 Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
FprEN 4850-2021 Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
EN 14662-3:2015 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
EN 4163:2009 Aerospace series - Screws 100 Degrees countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - 1 100 MPa (at ambient temperature) / 235 Degree C
EN 4163:2016 Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 °C
EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
EN 4129:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 Degrees C (Incorporating corrigendum April 2010)
EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography

International Electrotechnical Commission (IEC), Cadmium Environmental Standard Samples

IEC 62542:2013 Environmental standardization for electrical and electronic products and systems - Standardization of environmental aspects - Glossary of terms
IEC GUIDE 109:1995 Environmental aspects - Inclusion in electrotechnical product standards
IEC TR 62139:2004 Guidelines for the addition of environmental aspects in product standards specific to TC 23
IEC Guide 109:2003 Environmental aspects - Inclusion in electrotechnical product standards
IEC Guide 109:2012 Environmental aspects - Inclusion in electrotechnical product standards
IEC TR 63212:2020 Harmonization of environmental performance criteria for electrical and electronic products - Feasibility study
IEC 60050-904:2014 International Electrotechnical Vocabulary - Part 904: Environmental standardization for electrical and electronic products and systems
IEC 60050-904:2014/AMD1:2015 International Electrotechnical Vocabulary - Part 904: Environmental standardization for electrical and electronic products and systems; Amendment 1

Taiwan Provincial Standard of the People's Republic of China, Cadmium Environmental Standard Samples

CNS 14064-2006 Guide for the inclusion of environmental aspects in product standards
CNS 14064-2-2021 Guide for the inclusion of environmental aspect in product standards
CNS 14064-1997 Guide for the inclusion of environmental aspect in product standards
CNS 14064-1-2021 Guide for the inclusion of environmental aspect in product standards

German Institute for Standardization, Cadmium Environmental Standard Samples

DIN EN 20187:1993 Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990); German version EN 20187:1993
DIN EN 15841:2010-04 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition; German version EN 15841:2009
DIN EN 15530:2008 Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards; German version EN 15530:2008
DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
DIN-Fachbericht 54:2003 Environmental aspects - Inclusion in electrotechnical product standards; German and English version
DIN SPEC 59:2010 Guide for addressing environmental issues in product standards (ISO Guide 64:2008)
DIN-Fachbericht 108:2003 Guide for the inclusion of environmental aspects in product standardization and development; German and English Version
DIN EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition; German version EN 15841:2009
DIN SPEC 59 Beiblatt 1:2018-11 Guide for addressing environmental issues in product standards (ISO Guide 64:2008); Supplement 1: Guidance on addressing resource protection issues
DIN SPEC 59:2010-05*DIN ISO Guide 64:2010-05 Guide for addressing environmental issues in product standards (ISO Guide 64:2008)
DIN CEN/TR 16928:2016-12*DIN SPEC 19646:2016-12 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering; German version CEN/TR 16928:2016
DIN EN 62570:2016-09 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment (IEC 62570:2014); German version EN 62570:2015
DIN EN 14662-3:2016-02 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2015
DIN EN 14662-4:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2022-09 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German and English version prEN 14662-1:2022 / Note: Date of issue 2022-07-29*Intended as r...
DIN EN 14662-1:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005 / Note: To be replaced by DIN EN 14662-1 (2022-09).
DIN EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2005
DIN EN 14662-2:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
DIN EN 14662-5:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
DIN EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005

Danish Standards Foundation, Cadmium Environmental Standard Samples

DS/EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
DS/ISO Guide 64:2008 Guide for addressing environmental issues in product standards
DS/EN 2652:1997 Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235°C
DS/EN 3035:1997 Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235°C
DS/EN 4163:2009 Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - 1 100 MPa (at ambient temperature) / 235 °C
DS/EN 2859:2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series – Classification: 1 100 MPa (at ambient temperature) / 235 °C
DS/EN 15530:2008 Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards
DS/EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
DS/EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
DS/EN 3230:2001 Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated, Classification: 900 MPa (at ambient temperature)/235 °C
DS/EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
DS/EN 2897:1997 Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235°C
DS/EN 2886:1997 Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235°C
DS/EN 3303:1997 Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235°C

Lithuanian Standards Office , Cadmium Environmental Standard Samples

LST EN 15841-2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
LST EN 2652-2001 Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235°C
LST EN 3035-2001 Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
LST EN 4163-2010 Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - 1 100 MPa (at ambient temperature) / 235 °C
LST EN 2859-2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1 100 MPa (at ambient temperature) / 235 °C
LST EN 15530-2008 Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards
LST 0-3-4-2012 Standardization - Part 3. Structure and presentation of standards and other publacations - Chapter 4. Guide for addressing environmental issues in product standards
LST EN 14662-1-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography
LST EN 14662-4-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
LST EN 2886-2001 Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
LST EN 4162-2010 Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - 1 100 MPa (at ambient temperature) / 235 °C
LST EN 2897-2001 Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
LST EN 3303-2001 Aerospace series - Screw, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235°C

AENOR, Cadmium Environmental Standard Samples

UNE-EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
UNE-ISO GUIA 64:2010 Guide for addressing environmental issues in product standards.
UNE-EN 3112:1996 AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN ALLOYS STEEL, CADMIUM PLATED. CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 oC.
UNE-EN 15530:2008 Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards
UNE-EN 14662-4:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
UNE-EN 14662-1:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
UNE-EN 2886:1999 AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235o C
UNE-EN 2897:1997 AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 oC.
UNE-EN 3303:1997 AEROSPACE SERIES. SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION: 1 100 MPA (AT AMBIAENT TEMPERATURE)/235 oC.

British Standards Institution (BSI), Cadmium Environmental Standard Samples

BS EN 15841:2009 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
BS EN 15530:2008 Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards
19/30367217 DC BS EN 17346. Ambient Air Quality. Standard method for the determination of the concentration of ammonia by diffusive sampling
BS PD CEN/TR 16928:2016 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering
BS EN 62542:2013 Environmental standardization for electrical and electronic products and systems. Glossary of terms
PD ISO/TR 24699:2009 Rubber and rubber products. Environmental aspects. General guidelines for their inclusion in standards
PD IEC TR 63212:2020 Harmonization of environmental performance criteria for electrical and electronic products. Feasibility study
BS EN 2886:1996 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 °C
BS EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography
BS EN 4129:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 °C
BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-4:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-2:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 16214-3:2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria indicators and verifiers. Biodiversity and environmental aspects related to nature protection purposes

VN-TCVN, Cadmium Environmental Standard Samples

TCVN 6845-2011 Guide for addressing environmental issues in product standards

TH-TISI, Cadmium Environmental Standard Samples

TIS 5064-2010 Guide for addressing environmental issues in product standards

International Organization for Standardization (ISO), Cadmium Environmental Standard Samples

ISO Guide 64:2008 Guide for addressing environmental issues in product standards
ISO Guide 64:1997 Guide for the inclusion of environmental aspects in product standards
ISO/TR 24699:2009 Rubber and rubber products - Environmental aspects - General guidelines for their inclusion in standards
ISO/TR 14049:2012 Environmental management - Life cycle assessment - Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis

ZA-SANS, Cadmium Environmental Standard Samples

ARP 720-2008 Guide for addressing environmental issues in product standards
SANS 70:2004 Conditioning of textiles and standard temperate atmosphere for determining their physical and mechanical properties

Hebei Provincial Standard of the People's Republic of China, Cadmium Environmental Standard Samples

DB13/ 310-1997 Environmental quality standards for production areas of pollution-free agricultural products

CH-SNV, Cadmium Environmental Standard Samples

SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

PL-PKN, Cadmium Environmental Standard Samples

PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers

ES-UNE, Cadmium Environmental Standard Samples

UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
UNE 157923:2006 General criteria for the products of environmental impact studies of projects for irrigation.
UNE-EN 62542:2013 Environmental standardization for electrical and electronic products and systems - Glossary of terms (Endorsed by AENOR in October of 2013.)
UNE-EN 62570:2015 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment (Endorsed by AENOR in July of 2015.)
UNE-EN ISO 5157:2023 Textiles - Environmental aspects - Vocabulary (ISO 5157:2023) (Endorsed by Asociación Española de Normalización in October of 2023.)
UNE-EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography

Japanese Industrial Standards Committee (JISC), Cadmium Environmental Standard Samples

JIS Q 0064:1998 Guide for the inclusion of environmental aspects in product standards
JIS Q 0064:2014 Guide for addressing environmental issues in product standards

Shandong Provincial Standard of the People's Republic of China, Cadmium Environmental Standard Samples

DB37/ 274.1-2000 Environmental Quality Standards for Production Areas of Pollution-Free Agricultural Products (Repealed)
DB37/T 1668-2010 Environment-friendly product quality standard natural color cultural paper
DB37/T 1670-2010 Environment-friendly product quality standard natural color household paper
DB37/T 1680-2010 Environment-friendly product quality standard decorative flocking fabric
DB37/T 2539-2014 Specifications for Compilation of Local Standards for Technical Requirements of Environmentally Friendly Products in Shandong Province

Zhejiang Provincial Standard of the People's Republic of China, Cadmium Environmental Standard Samples

DB33/T 558-2005 Environmental Quality and Safety Standards for Agricultural Products in Zhejiang Province

US-CFR-file, Cadmium Environmental Standard Samples

CFR 40-1065.1107-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.1107:Sample media and sample system preparation; sample system assembly.
CFR 40-61.33-2014 Protection of Environment. Part61:National emission standards for hazardous air pollutants. Section61.33:Stack sampling.
CFR 40-61.53-2014 Protection of Environment. Part61:National emission standards for hazardous air pollutants. Section61.53:Stack sampling.

CEN - European Committee for Standardization, Cadmium Environmental Standard Samples

PREN 17346-2019 Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling

Gansu Provincial Standard of the People's Republic of China, Cadmium Environmental Standard Samples

DB62/T 898-2002 Lanzhou Environmental Quality Standards for Production Areas of Pollution-free Agricultural Products and Livestock Products

Yunnan Provincial Standard of the People's Republic of China, Cadmium Environmental Standard Samples

DB53/T 088-2000 Environmental Quality Standards for Places of Origin of Pollution-free Agricultural Products (or Raw Materials)

Canadian Standards Association (CSA), Cadmium Environmental Standard Samples

CSA ISO GUIDE 64-98-CAN/CSA:1998 Guide for the Inclusion of Environmental Aspects in Product Standards First Edition
CSA ISO-GUIDE 64-CAN/CSA:1998 Gas Convenience Outlets and Optional Enclosures

GOSTR, Cadmium Environmental Standard Samples

PNST 349-2019 ？Green？ standards. ？Green？ technologies of living environment and ？green？ innovative products. Terms and definitions
GOST IEC 62542-2016 Environmental standardization for electric and electronic products and systems. Glossary of terms
GOST IEC 60050-904-2017 International electrotechnical vocabulary. Part 904. Environmental standardization for electrical and electronic products and systems

Shanghai Provincial Standard of the People's Republic of China, Cadmium Environmental Standard Samples

DB31/T 252-2000 Environmental standards for origin of safe, hygienic and high-quality agricultural products (or raw materials)

CENELEC - European Committee for Electrotechnical Standardization, Cadmium Environmental Standard Samples

EN 62542:2013 Environmental standardization for electrical and electronic products and systems - Glossary of terms

KR-KS, Cadmium Environmental Standard Samples

KS C IEC 62542-2021 Environmental standardization for electrical and electronic products and systems — Glossary of terms
KS C IEC TR 63212-2022 Harmonization of environmental performance criteria for electrical and electronic products — Feasibility study
KS C IEC 60050-904-2021 International Electrotechnical Vocabulary — Part 904:Environmental standardization for electrical and electronic products and systems

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Cadmium Environmental Standard Samples

PREN 4309-1996 Aerospace Series Nuts@ Hexagon@ Self-Locking by Plastic Ring@ Normal Height@ Normal Across Flats@ in Alloy Steel@ Cadmium Plated Classification : 900 MPa (at Ambient Temperature) / 120 Degrees Celsius (Edition P 1)
PREN 3226-1992 Aerospace Series Nuts@ Hexagon@ Plain@ Normal Height@ Normal Across Flats@ in Steel@ Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius (Edition P 1)
PREN 3228-1992 Aerospace Series Nuts@ Hexagon@ Plain@ Reduced Height@ Normal Across Flats@ in Steel@ Cadmium Plated Classification: 900 MPa (at Ambient Temperature) / 235 Degrees Celsius (Edition P 1)

Group Standards of the People's Republic of China, Cadmium Environmental Standard Samples

T/GDNB 71.2-2021 The whole industry chain standard system of Guangdong characteristic agricultural products?Pineapple-General rules for park environment standards
T/ZNZ 155.2-2023 Green Food Yuhang Honey Pear Standard Complex Part 2: Production Environment

CN-STDBOOK, Cadmium Environmental Standard Samples

图书 3-8689 Compilation of National Standards for Environmental Testing of Electrical and Electronic Products (6th Edition) Volume 1

IX-EU/EC, Cadmium Environmental Standard Samples

M 258-1997 STANDARDISATION MANDATE TO CEN AND CENELEC FOR STANDARD MEASURING METHODS OF Pb, Cd, As, Ni IN AMBIENT AIR

European Association of Aerospace Industries, Cadmium Environmental Standard Samples

AECMA PREN 2889-1999 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated Classification: 900 MPa (at Ambient Temperature) / 235 Degrees C Edition 1
AECMA PREN 2889-1994 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated Classification: 900 MPa (at Ambient Temperature)/235 Degrees C Edition P 2
AECMA PREN 2889-1989 Bolts, Hexagonal Normal Head, Coarse Tolerance Shank, Short Thread, in Steel, Cadmium Plated Classification 900 MPa/235 Degrees Celsius

European Committee for Electrotechnical Standardization（CENELEC）, Cadmium Environmental Standard Samples

EN 62570:2015 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment

IT-UNI, Cadmium Environmental Standard Samples

UNI 5088-1962
EC 1-2021 UNI EN 4162-2021 Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

环境保护部、国家质量监督检验检疫总局, Cadmium Environmental Standard Samples

GB 16487.3-2017 Environmental protection control standard for imported solid wastes as raw materials—Wood and wood articles wastes

Aerospace, Security and Defence Industries Association of Europe (ASD), Cadmium Environmental Standard Samples

ASD-STAN PREN 4163-2014 Aerospace series Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated Classification: 1 100 MPa (at ambient temperature) / 235 °C (Edition P2)
ASD-STAN PREN 4136-1994 Aerospace Series Bolts, Normal Bi-Hexagonal Head, Coarse Tolerance Normal Shank, Long Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature)/235 Degrees C (Edition P1)
ASD-STAN PREN 2413-1994 Aerospace Series Bolts, Thin Hexagonal Head, Close Tolerance Shank, Short Thread, in Alloy Steel, Cadmium Plated Classification : 1 100 MPa (at Ambient Temperature)/235 Degrees C (Edition P 2)
ASD-STAN PREN 2859-1999 Aerospace Series Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees C (Edition 1)
ASD-STAN PREN 2889-1999 Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated Classification: 900 MPa (at Ambient Temperature) / 235 Degrees C (Edition 1)