ZH
RU
ES

Measuring gold nanoparticles

Measuring gold nanoparticles, Total:187 items.

In the international standard classification, Measuring gold nanoparticles involves: Test conditions and procedures in general, Physics. Chemistry, Astronomy. Geodesy. Geography, Analytical chemistry, Materials for aerospace construction, Optics and optical measurements, Optical equipment, Laboratory medicine, Electronic display devices, Electronic components in general, Products of the chemical industry, Cereals, pulses and derived products, Electricity. Magnetism. Electrical and magnetic measurements, Air quality, Linear and angular measurements, Microbiology.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Measuring gold nanoparticles

GB/T 33714-2017 Nanotechnology—Test method for size of nanoparticles—Atomic force microscopy
GB/T 34831-2017 Nanotechnologies—Electron microscopy imaging of noble metal nanoparticles—High angle annular dark field imaging method
GB/T 34168-2017 Test method of gold and silver nanoparticle materials biological effect by transmission electron microscope
GB/T 33249-2016 Nanotechnology—Quantification of gold nanorods in living cells—Extinction spectroscopy
GB/T 24369.3-2017 Characterization of gold nanorods—Part 3: Measurement method of surface charge density
GB/T 36084-2018 Nanotechnology—Determination of copper, manganese and chromium ions in aqueous solution—Ultraviolet-visible spectrophotometry

RU-GOST R, Measuring gold nanoparticles

GOST R 59582-2021 Nanotechnologies. Antibacterial silver nanoparticles. Characteristics and measurement methods
GOST R 8.698-2010 State system for ensuring the uniformity of measurements. Dimensional parameters of nanoparticles and thin films. Method for measurement by means of a small angle X-ray scattering diffractometer
GOST R 59464-2021 Nanomanufacturing. Key control characteristics. Part 4-7. Anode nanomaterials for electric energy storage devices. Determination of the content of metal-magnetic impurities by the method of inductively coupled plasma optical emission spectrometry

International Organization for Standardization (ISO), Measuring gold nanoparticles

ISO/TS 17200:2013 Nanotechnology.Nanoparticles in powder form.Characteristics and measurements
ISO 17200:2020 Nanotechnology — Nanoparticles in powder form — Characteristics and measurements
ISO 10801:2010 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
ISO 19007:2018 Nanotechnologies — In vitro MTS assay for measuring the cytotoxic effect of nanoparticles
ISO/TS 23366:2023 Nanotechnologies — Performance evaluation requirements for quantifying biomolecules using fluorescent nanoparticles in immunohistochemistry
ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
ISO/TS 19590:2017 Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
ISO/TS 16550:2014 Nanotechnologies - Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus
ISO 10808:2010 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
ISO/TS 18827:2017 Nanotechnologies - Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
ISO/TR 23173:2021 Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings
ISO/TS 14101:2012 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method
ISO 21363:2020 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy

CH-SNV, Measuring gold nanoparticles

SN EN ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)

Lithuanian Standards Office , Measuring gold nanoparticles

LST EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)
LST EN ISO 10808:2011 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010)
LST EN ISO 10801:2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Measuring gold nanoparticles

GB/T 43196-2023 Nanotechnology Scanning Electron Microscopy to Measure Nanoparticle Size and Shape Distribution
GB/T 42208-2022 Nanotechnologies—Measurement of nanoparticle size in multiphase system—Image method of transmission electron microsopy
GB/T 42469-2023 Nanotechnology Antimicrobial Silver Nanoparticles Properties and Measurement Methods General Rules
GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
GB/Z 42840-2023 Nanotechnology using muramic acid released by Staphylococcus aureus to detect the potency of silver nanoparticles
GB/T 42976-2023 Nanotechnology nano-photoelectric display quantum dot light conversion film optical performance testing method
GB/T 42977-2023 Determination of optical reliability of nanotechnology nano-photoelectric display quantum dot light conversion film
GB/T 41917-2022 Nanotechnologies—Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
GB/T 24369.2-2018 Characterization of gold nanorods—Part 2: Measurement methods for optical properties
GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
GB/T 24369.2-2018(英文版) "Characterization of gold nanorods—Part 2:Measurement methods for  optical properties"
GB/T 24369.3-2017(英文版) "Characterization of gold nanorods—Part 3: Measurement method of surface charge density"
GB/T 38261-2019(英文版) Nanotechnology—Determination of silver contents in biological samples-Inductively coupled plasma mass spectrometry
GB/T 42240-2022 Nanotechnology—Measurement of metallic impurities in graphene powder—Inductively coupled plasma mass spectrometry
GB/T 27760-2011 Test method for calibrating the z-magnification of an atomic force microscope at subnanometer displacement levels using Si(111) monatomic steps
GB/T 22462-2008 Nano,Sub-micron scale film on steel.Quantitative depth profile analysis.Glow discharge atomic emission spectrometry

European Committee for Standardization (CEN), Measuring gold nanoparticles

CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013)
EN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)
EN ISO 10801:2010 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
EN ISO 10808:2010 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010)
EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
prEN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters

ES-UNE, Measuring gold nanoparticles

ISO/TS 24672:2023 Nanotechnologies — Guidance on the measurement of nanoparticle number concentration
UNE-EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020) (Endorsed by Asociación Española de Normalización in November of 2020.)
UNE-EN ISO 10801:2010 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010) (Endorsed by AENOR in February of 2011.)
UNE-EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021) (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE-EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020) (Endorsed by Asociación Española de Normalización in February of 2022.)
UNE-EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters (Endorsed by Asociación Española de Normalización in October of 2017.)

PH-BPS, Measuring gold nanoparticles

PNS ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
PNS IEC/TS 62607-3-2:2021 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
PNS ISO 19007:2021 Nanotechnologies - In vitro MTS assay for measuring the cytotoxic effect of nanoparticles
PNS ISO/TS 14101:2021 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method
PNS ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
PNS ISO/TS 16550:2021 Nanotechnologies - Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus
PNS ISO/TS 18827:2021 Nanotechnologies - Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
PNS ISO/TS 19006:2021 Nanotechnologies - 5-(and 6)-Chloromethyl-2',7' Dichloro-dihydrofluorescein diacetate (CM-H2DCF-DA) assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production in RAW 264.7 macrophage cell line

Danish Standards Foundation, Measuring gold nanoparticles

DS/ISO/TS 17200:2013 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
DS/EN ISO 10808:2011 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
DS/ISO 19749:2021 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy
DS/EN ISO 10801:2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method

IT-UNI, Measuring gold nanoparticles

UNI EN ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements

German Institute for Standardization, Measuring gold nanoparticles

DIN EN ISO 17200:2020-12 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020); German version EN ISO 17200:2020
DIN IEC/TS 62607-3-2:2018-09*DIN SPEC 42607-3-2:2018-09 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
DIN EN ISO 10801:2011-04 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010); German version EN ISO 10801:2010
DIN EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020); German version EN ISO 17200:2020
DIN IEC/TS 62607-3-2:2014 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC 113/203/CD:2013)
DIN IEC/TS 62607-3-2:2018 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
DIN EN ISO 10801:2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010); German version EN ISO 10801:2010
DIN CEN ISO/TS 19590:2019-11*DIN SPEC 19286:2019-11 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017); German version CEN ISO/TS 19590:2019
DIN EN ISO 19749:2023-07 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021); German version EN ISO 19749:2023
DIN EN ISO 21363:2022-03 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020); German version EN ISO 21363:2022
DIN EN ISO 10808:2011 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010); German version EN ISO 10808:2010
DIN IEC/TS 62607-5-1:2016-07*DIN SPEC 42607-5-1:2016-07 Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements (IEC/TS 62607-5-1:2014)
DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)
DIN EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters
DIN EN 16897:2017-09 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters; German version EN 16897:2017
DIN IEC/TS 62607-5-1:2014 Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements (IEC 113/183/CD:2013)

American Society for Testing and Materials (ASTM), Measuring gold nanoparticles

ASTM E2834-12(2018) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12(2022) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2859-11(2017) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
ASTM E285-08(2015) Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
ASTM E2859-11(2023) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
ASTM E3238-20 Standard Test Method for Quantitative Measurement of the Chemoattractant Capacity of a Nanoparticulate Material in vitro
ASTM E2490-09 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM E2490-09(2015) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM E2490-08 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM E2490-09(2021) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM D8526-23 Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient
ASTM E3247-20 Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering
ASTM E2864-13 Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM E2526-08 Standard Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells and Human Hepatocarcinoma Cells
ASTM E2864-18 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption

British Standards Institution (BSI), Measuring gold nanoparticles

BS PD CEN ISO/TS 17200:2015 Nanotechnology. Nanoparticles in powder form. Characteristics and measurements
BS EN ISO 17200:2020 Nanotechnology. Nanoparticles in powder form. Characteristics and measurements
PD ISO/TS 5094:2023 Nanotechnologies. Assessment of peroxidase-like activity of metal and metal oxide nanoparticles
BS EN ISO 10801:2011 Nanotechnologies. Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
BS EN ISO 10801:2010 Nanotechnologies. Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
PD ISO/TS 20660:2019 Nanotechnologies. Antibacterial silver nanoparticles. Specification of characteristics and measurement methods
19/30380628 DC BS EN ISO 17200. Nanotechnology. Nanoparticles in powder form. Characteristics and measurements
BS ISO 19007:2018 Nanotechnologies. In vitro MTS assay for measuring the cytotoxic effect of nanoparticles
PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
BS ISO 19749:2021 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS PD ISO/TS 16550:2014 Nanotechnologies. Determination of silver nanoparticles potency by release of muramic acid from $iS$it$ia$ip$ih$iy$il$io$ic$io$ic$ic$iu$is $ia$iu$ir$ie$iu$is
BS EN ISO 10808:2011 Nanotechnologies. Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
BS EN ISO 10808:2010 Nanotechnologies. Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
BS EN ISO 21363:2022 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
BS EN ISO 19749:2023 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS ISO 21363:2020 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
PD IEC TS 62607-5-3:2020 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Measurements of charge carrier concentration
BS PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
PD CEN ISO/TS 19590:2019 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
PD ISO/TS 18827:2017 Nanotechnologies. Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
BS PD IEC/TS 62607-5-1:2014 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Carrier transport measurements
PD IEC/TS 62607-5-1:2014 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Carrier transport measurements
18/30351679 DC BS ISO 19749. Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
18/30351714 DC BS ISO 21363. Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
PD ISO/TS 16550:2014 Nanotechnologies. Determination of silver nanoparticles potency by release of muramic acid from <i>Staphylococcus</i> <i>aureus</i>
PD IEC TS 62607-3-3:2020 Nanomanufacturing. Key control characteristics. Luminescent nanomaterials. Determination of fluorescence lifetime of semiconductor quantum dots using time correlated single photon counting (TCSPC)
BS EN 16897:2017 Workplace exposure. Characterization of ultrafine aerosols/nanoaerosols. Determination of number concentration using condensation particle counters
BS EN ISO 28439:2011 Workplace atmospheres. Characterization of ultrafine aerosols/nanoaerosols. Determination of the size distribution and number concentration using differential electrical mobility analysing systems

Guangdong Provincial Standard of the People's Republic of China, Measuring gold nanoparticles

DB44/T 1654-2015 Nanotechnology - Characterization and Measurement of Powdered Nanoparticles

Korean Agency for Technology and Standards (KATS), Measuring gold nanoparticles

KS D 2716-2008 Measurement of nanoparticle diameter－Transmission electron microscope
KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
KS C ISO TS 18827:2021 Nanotechnologies — Electron spin resonance(ESR) as a method for measuring reactive oxygen species(ROS) generated by metal oxide nanomaterials
KS C IEC TS 62607-5-1:2019 Nanomanufacturing — Key control characteristics — Part 5-1: Thin-film organic/nano electronic devices — Carrier transport measurements
KS I ISO 28439:2013 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems

KR-KS, Measuring gold nanoparticles

KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
KS C ISO TS 14101-2023 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method
KS C ISO 19749-2023 Nanotechnologies — Measurements of particle size and shape distributions by scanning electron microscopy
KS C ISO 21363-2023 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy
KS C ISO TS 18827-2021 Nanotechnologies — Electron spin resonance(ESR) as a method for measuring reactive oxygen species(ROS) generated by metal oxide nanomaterials
KS C IEC TS 62607-5-1-2019 Nanomanufacturing — Key control characteristics — Part 5-1: Thin-film organic/nano electronic devices — Carrier transport measurements

Association Francaise de Normalisation, Measuring gold nanoparticles

NF EN ISO 17200:2020 Nanotechnologies - Nanoparticules sous forme de poudre - Caractéristiques et mesurages
NF T16-302*NF EN ISO 10801:2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method.
NF T16-300*NF EN ISO 10808:2011 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
XP T16-401*XP CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
NF T16-404:2020 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
NF T16-403*NF ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
NF T16-404*NF EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF EN ISO 10801:2011 Nanotechnologies - Génération de nanoparticules de métal pour essais de toxicité par inhalation en utilisant la méthode de condensation/évaporation
NF EN ISO 19749:2023 Nanotechnologies - Détermination de la distribution de taille et de forme des particules par microscopie électronique à balayage
NF EN ISO 21363:2022 Nanotechnologies - Détermination de la distribution de taille et de forme des particules par microscopie électronique à transmission
NF V03-708:2010 Maőze - Determination of moisture content (on milled grains and on whole grains).
NF V03-708:1976 Maize. Determination of moisture content (using ground seeds and whole seeds).
NF X43-223*NF EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters
NF EN 16897:2017 Exposition sur les lieux de travail - Caractérisation des aérosols ultrafins/nanoaérosols - Détermination de la concentration en nombre à l'aide de compteurs de particules à condensation
XP CEN ISO/TS 21083-2:2019 Méthode d'essai pour mesurer l'efficacité des médias de filtration d'air par rapport aux nanomatériaux sphériques - Partie 2 : spectre granulométrique de 3 nm à 30 nm
NF EN ISO 21083-1:2018 Méthode d'essai pour mesurer l'efficacité des médias de filtration d'air par rapport aux nanomatériaux sphériques - Partie 1 : spectre granulométrique de 20 nm à 500 nm

PL-PKN, Measuring gold nanoparticles

PN-EN ISO 17200-2021-03 E Nanotechnology -- Nanoparticles in powder form -- Characteristics and measurements (ISO 17200:2020)

IEC - International Electrotechnical Commission, Measuring gold nanoparticles

TS 62607-3-2-2017 Nanomanufacturing – Key control characteristics – Part 3-2: Luminescent nanoparticles – Determination of mass of quantum dot dispersion (Edition 1.0)

GOSTR, Measuring gold nanoparticles

GOST R 57909-2017 Nanotechnologies. Powders from nanoparticles. Basic characteristics and methods for determination
GOST R 57103-2016 Specialized food products. Methods of sampling, detection and determination of nanoparticles and nanomaterials in the composition of agricultural and food products
GOST R ISO 14644-12-2020 Cleanrooms and associated controlled environments. Part 12. Specifications for monitoring air cleanliness b nanoscale particle concentration

International Electrotechnical Commission (IEC), Measuring gold nanoparticles

IEC TS 62607-3-2:2017 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
IEC 113/203/CD:2013 IEC/TS 62607-3-2: Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
IEC TS 62607-5-3:2020 Nanomanufacturing - Key control characteristics - Part 5-3: Thin-film organic/nano electronic devices – Measurements of charge carrier concentration
IEC TS 62607-5-1:2014 Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements
IEC TS 62607-5-4:2022 Nanomanufacturing - Key control characteristics - Part 5-4: Energy band gap measurement of nanomaterials by electron energy loss spectroscopy (EELS)
IEC TS 62607-3-3:2020 Nanomanufacturing - Key control characteristics - Part 3-3: Luminescent nanomaterials - Determination of fluorescence lifetime of semiconductor quantum dots using time correlated single photon countin
IEC TS 62607-8-3:2023 Nanomanufacturing - Key control characteristics - Part 8-3: Nano-enabled metal-oxide interfacial devices - Analog resistance change and resistance fluctuation: Electrical resistance measurement

Group Standards of the People's Republic of China, Measuring gold nanoparticles

T/SCGS 313004-2023

国家市场监督管理总局、中国国家标准化管理委员会, Measuring gold nanoparticles

GB/T 37966-2019 Nanotechnologies—Measurement method for peroxidase-like activity of iron oxide nanoparticles
GB/T 40066-2021 Nanotechnologies—Thickness measurement of graphene oxide—Atomic Force Microscopy (AFM)
GB/T 41068-2021 Nanotechnologies—Determination of water-soluble anions content in graphene powder—Ion chromatography method
GB/T 38261-2019 Nanotechnology—Determination of silver contents in biological samples—Inductively coupled plasma mass spectrometry
GB/T 25915.12-2021 Cleanrooms and associated controlled environments—Part 12: Specifications for monitoring of air cleanliness by nanoscale particle concentration
GB/T 41067-2021 Nanotechnologies—Determination of sulfur, fluorine, chlorine and bromine content in graphene flakes—Combustion ion chromatography method

未注明发布机构, Measuring gold nanoparticles

DIN EN ISO 21363:2022 Nanotechnologies – measurements of particle size and particle shape distributions using transmission electron microscopy

CEN - European Committee for Standardization, Measuring gold nanoparticles

CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
PREN 17199-2-2018 Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 2: Rotating drum method
PREN 17199-4-2017 Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 4: Small rotating drum method
PREN 17199-3-2017 Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 3: Continuous drop method
PREN 17199-5-2017 Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 5: Vortex shaker method
PREN 17199-1-2017 Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 1: Requirements and choice of test methods

AT-ON, Measuring gold nanoparticles

OENORM EN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)