ZH
RU
ES
Material testing
Material testing, Total:201 items.
In the international standard classification, Material testing involves: Structures of buildings, Construction materials, Insulating fluids, Non-destructive testing, Components for electrical equipment, Refractories, Software development and system documentation, Radiation protection, Insulating materials, Civil engineering in general, Products of the chemical industry, TESTING, Quality, Railway engineering in general, Ferroalloys, Testing of metals, Road engineering, Materials and articles in contact with foodstuffs, Powder metallurgy, Construction technology, Mechanical testing.
HU-MSZT, Material testing
CH-SNV, Material testing
Indonesia Standards, Material testing
- SNI 03-6762-2002 Test method for piles under lateral load
- SNI 03-6868-2002 Manual for random sampling of construction materials
- SNI 03-6755-2002 Test methods for bulk specific gravity of compact asphalt mixture using parafin layer test specimens
- SNI 03-6757-2002 Test method for bulk specific gravity of compact asphalt mixture using saturated surface dry test specimens
- SNI 03-6865-2002 Procedure for preparation of inter-laboratory testing program for determining precission of construction materials test method
Korean Agency for Technology and Standards (KATS), Material testing
YU-JUS, Material testing
- JUS C.X5.032-1990 MagnetIc materials. Hethods of test. Insulation resistance measurement
- JUS D.Z8.041-1989 Cork. Composition cork gasket material. Test methods
- JUS D.A8.080-1984 Testing of fibre building boards. Sampling and preparing test pieces
- JUS G.S2.637-1985 Plastics. Testing of industrial laminates. Wedging test for industrial laminated sheets
- JUS D.Z8.049-1990 Cork. Agglomerated cork filler material of expansion ioints for construction and building. Test methods
Danish Standards Foundation, Material testing
- DS/ISO 3452-2:2021 Non-destructive testing – Penetrant testing – Part 2: Testing of penetrant materials
- DS/EN ISO 3452-2:2021 Non-destructive testing – Penetrant testing – Part 2: Testing of penetrant materials (ISO 3452-2:2021)
- DS/EN ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
Guangdong Provincial Standard of the People's Republic of China, Material testing
- DB44/T 1349-2014 Testing specification for high-performance soft ferrite materials
Group Standards of the People's Republic of China, Material testing
- T/YXNX 001-2020 Management regulation of test sample for refractory hygroscopisity of refractory
- T/QGCML 1470-2023 Material testing laboratory management platform technical specifications
- T/WHAEPI 005-2021 NaI low-background multi-channel gamma spectrometer for building materials testing
- T/HACE 023-2023 Occupational standards for municipal engineering materials testing personnel of construction engineering
German Institute for Standardization, Material testing
- DIN 4862:2019-04 Testing of ceramic raw and basic materials - Acid pressure digestion of ash residues after combustion of carbon and graphite materials
- DIN 52027:2003-11 Testing of carbonaceous materials - Distillation of refined coal tars
- DIN 51061:2017-04 Testing of ceramic raw and finished materials - Sampling of ceramic raw materials
GOSTR, Material testing
- GOST R 57107-2016 Specialized food products. Order to the detection and identification of nanomaterials in plants
Lithuanian Standards Office , Material testing
- LST EN ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2006)
- LST EN ISO 3452-2:2021 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021)
AENOR, Material testing
- UNE-EN ISO 3452-2:2014 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
British Standards Institution (BSI), Material testing
- BS EN 60811-100:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General
- BS EN 60811-606:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Methods for determining the density
- BS EN 60811-507:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Hot set test for cross-linked materials
- BS EN 60811-502:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for insulations
- BS EN 60811-202:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of thickness of non-metallic sheath
- BS EN 60811-302:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Electrical tests. Measurement of the d.c. resistivity at 23 $0dC and 100 °C of filling compounds
Association Francaise de Normalisation, Material testing
- NF EN 302065-4-4:2022 Dispositifs à courte portée (SRD) utilisant la technologie à bande ultra large (ULB) - Norme harmonisée pour l'accès au spectre radioélectrique - Partie 4 : dispositifs de détection de matériau - Sous-partie 4 : applications de détection de m...
- NF EN ISO 3452-2:2021 Essais non destructifs - Examen par ressuage - Partie 2 : essai des produits de ressuage
- NF A09-120-2*NF EN ISO 3452-2:2021 Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials
- NF A09-120-2:2014 Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials
Professional Standard - Non-ferrous Metal, Material testing
- YS/T 63.20-2006 Carbonaceous materials used in the production of aluminium. Part 20:Determination of sulfur content
- YS/T 63.20-2023 Carbonaceous materials used for the production of aluminium — Part 20:Determination of sulfur content
- YS/T 63.17-2006 Carbonaceous materials used in the production of aluminium. Part 17:Determination of volatile matter content
- YS/T 63.15-2006 Carbonaceous materials used in the production of aluminium. Part 15:Determination of compressive strength
- YS/T 63.18-2006 Carbonaceous materials used in the production of aluminium. Part 18:Determination of water content
- YS/T 63.19-2006 Carbonaceous materials used in the production of aluminium. Part 19:Determination of ash content
- YS/T 63.15-2012 Carbonaceous materials used in the production of aluminium.Part 15:Determination of compressive strength
- YS/T 63.19-2012 Carbonaceous materials used in the production of aluminium.Part 19:Determination of ash content
- YS/T 63.13-2016 Test methods for carbon materials for aluminum - Part 13: Determination of elastic modulus
- YS/T 63.15-2023 Carbonaceous materials used for the production of aluminium — Part 15:Determination of compressive strength
- YS/T 63.4-2006 Carbonaceous materials used in the production of aluminium-Part 4:Determination of the thermal expansion coefficient
- YS/T 63.10-2006 Carbonaceous materials used in the production of aluminium. Part 10:Determination of the air permeability
- YS/T 63.10-2012 Carbonaceous materials used in the production of aluminium.Part 10:Determination of the air permeability
- YS/T 63.2-2023 Carbonaceous materials used for the production of aluminium— Part 2：Determination of electrical resistivity at ambient temperature
- YS/T 63.4-2023 Carbonaceous materials used for the production of aluminium — Part 4:Determination of the thermal expansion coefficient
- YS/T 63.3-2006 Carbonaceous materials used in the production of aluminium-Part 3:Determination of the thermal conductivity using a comparative method
- YS/T 63.13-2006 Carbonaceous materials used in the production of aluminium-Part 13:Determination of young's modulus-Statical modulus method
- YS/T 63.7-2006 Carbonaceous materials used in the production of aluminium-Part 7:Determination of apparent density using a dimensions method
- YS/T 63.14-2006 Carbonaceous materials used in the production of aluminium-Part 14:Determination of bending/shear strength by a three-point method
- YS/T 63.8-2023 Carbonaceous materials used for the production of aluminium — Part 8:Determination of truth density — Pyknometric method
- YS/T 63.14-2023 Carbonaceous materials used for the production of aluminium — Part 14:Determination of bending/shears strength — Three point method
- YS/T 63.9-2006 Carbonaceous materials used in the production of aluminium. Part 9:Determination of truth density by helium pyknometry method
- YS/T 63.9-2012 Carbonaceous materials used in the production of aluminium.Part 9:Determination of truth density by helium pyknometry method
- YS/T 63.22-2009 Carbonaceous materials used in the production of aluminium.Part 22:Determination of baking level expressed by equivalent temperature
- YS/T 63.26-2012 Carbonaceous materials used in the production of aluminium.Part 26:Dense refractory bricks.Determination of cryolite resistance
- YS/T 63.6-2006 Carbonaceous materials used in the production of aluminium-Part 6:Determination of open porosity using a hydrostatic method
- YS/T 63.8-2006 Carbonaceous materials used in the production of aluminium-Part 8:Determination of the density in xylene by a pyknometric method
- YS/T 63.11-2006 Carbonaceous materials used in the production of aluminium-Part 11:Sidewall blocks and prebaked anodes-Determination of the reactivity to air-Loss in mass method
- YS/T 63.21-2007 Carbonaceous materials used in the production of aluminium. Part 21: Cathodic pastes. Determination of expansion/shrinkage during baking
- YS/T 63.5-2006 Carbonaceous materials used in the production of aluminium-Part 5:Cathode blocks-Determination of expansion due to sodium penetration with application of pressure
- YS/T 63.25-2012 Carbonaceous materials used in the production of aluminium.Part 25:Cathode blocks.Determination of expansion due to sodium penetration without application of pressure
- YS/T 63.23-2012 Carbonaceous materials used in the production of aluminium.Part 23:Baked anodes.Determination of the reactivity to air.Thermogravimetric method
- YS/T 63.2-2006 Carbonaceous materials used in the production of aluminium-Part 2: Cathode blocks and prebaked anodes-Determination of electrical resistivity at ambient temperature
- YS/T 63.24-2012 Carbonaceous materials used in the production of aluminium.Part 24:Baked anodes.Determination of the reactivity to carbon dioxide.Thermogravimetric method
- YS/T 63.16-2006 Carbonaceous materials used in the production of aluminium-Part 16:Analysis using an X-ray fluorescence method
- YS/T 63.12-2006 Carbonaceous materials used in the production of aluminium-Part 12:Prebaked anodes-Determination of the reactivity to carbon dioxide-Loss in mass method
Hebei Provincial Standard of the People's Republic of China, Material testing
- DB13/T 2768.1-2018 Graphene powder material test method part 1: Determination of ash content
- DB13/T 2768.3-2018 Graphene powder material testing method Part 3: Determination of electrical conductivity
- DB13/T 2768.5-2018 Graphene powder material testing method Part 5: Determination of thermal diffusivity flash method
- DB13/T 2768.4-2018 Graphene powder material detection method part 4: specific surface area, pore volume and pore diameter BET method
- DB13/T 2768.2-2018 Graphene powder material detection method part 2: Determination of carbon, nitrogen, hydrogen, sulfur, oxygen element content
工业和信息化部, Material testing
- YS/T 63.17-2019 Testing methods for carbon materials used in aluminum - Part 17: Determination of volatile matter
- YS/T 63.19-2021 Testing methods for carbon materials for aluminum use Part 19: Determination of ash content
- YS/T 63.6-2019 Testing methods for carbon materials for aluminum use Part 6: Determination of open porosity
- YS/T 63.3-2016 Testing methods for carbon materials for aluminum use Part 3: Comparative method for determination of thermal conductivity
- YS/T 63.27-2015 Testing methods for carbon materials for aluminum use Part 27: Determination of fracture energy of prebaked anodes
Professional Standard - Agriculture, Material testing
- SN/T 3179-2012 Test methods for food contact materials Paper and board sensory analysis Odor
国家市场监督管理总局, Material testing
- RB/T 064-2021 Inspection and testing agency management and technical capability evaluation building material testing requirements
国家铁路局, Material testing
- TB/T 3568.1-2021 Railway nondestructive testing materials Part 1: Magnetic particle testing materials
- TB/T 3568.2-2021 Railway Nondestructive Testing Materials Part 2: Penetrant Testing Materials
American Society for Testing and Materials (ASTM), Material testing
- ASTM E3025-22 Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles
- ASTM E3025-16 Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles
Professional Standard - Machinery, Material testing
- JB/T 10659-2006 Nondestructive testing Ultrasonic testing of forged steel materials Testing of connecting rods
- JB/T 10659-2015 Ultrasonic testing of connecting rods in non-destructive testing forged steel materials
- JB/T 10661-2006 Non-destructive testing Ultrasonic testing of forged steel materials Testing of universal joints
- JB/T 10661-2015 Ultrasonic testing of non-destructive testing forged steel material testing of universal joints
- JB/T 10660-2015 Non-destructive testing of forged steel materials Ultrasonic testing of connecting rod bolts
- JB/T 10660-2006 Non destructive testing Ultrasonic testing of forged steel materials Testing of connecting red bolts
International Federation of Trucks and Engines, Material testing
Professional Standard - Commodity Inspection, Material testing
- SN/T 3548-2013 Food contact materials.Polymer materials.Determination of phosphates plasticizer.Gas chromatography-mass spectrometry (GC-MS) method
海关总署, Material testing
- SN/T 5155-2019 Testing methods for food contact materials: Determination of crotonic acid content in polymeric material food simulants by high performance liquid chromatography
Association of German Mechanical Engineers, Material testing
PT-IPQ, Material testing
BR-ABNT, Material testing
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Material testing
- GB/T 41704-2022 Test methods of cathode materials for lithium ion battery—Determination of magnetic impurities content and residual alkali content
KR-KS, Material testing
- KS B ISO 3452-2-2022 Non-destructive testing — Penetrant testing —Part 2: Testing of penetrant materials
Standard Association of Australia （SAA）, Material testing
- AS ISO 3452.2:2020 Non-destructive testing — Penetrant testing, Part 2: Testing of penetrant materials
- AS/NZS ISO 3452.2:2023 Non-destructive testing — Penetrant testing, Part 2: Testing of penetrant materials
国家质量监督检验检疫总局, Material testing
- SN/T 4945-2017 Testing methods for food contact materials - Determination of N-methylol acrylamide in polymeric material food simulants by liquid chromatography
- SN/T 4946-2017 Testing method for food contact materials paper, regenerated cellulose material paper and cardboard Qualitative analysis test method for determination of inhibition zone of antibacterial substances
国家市场监督管理总局、中国国家标准化管理委员会, Material testing
- GB/T 40307-2021 Non-destructive testing—Test method for texture by neutron diffraction
AASHTO - American Association of State Highway and Transportation Officials, Material testing
- R 18-1997 Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories (Nineteenth Edition)
- R 18-1993 Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories (Eighteenth Edition)
RU-GOST R, Material testing
CN-STDBOOK, Material testing
- 图书 A-4619 Material quality inspection and analysis technology