ZH
RU
ES

Laboratory internal verification comparison

Laboratory internal verification comparison, Total:209 items.

In the international standard classification, Laboratory internal verification comparison involves: Quality, Air quality, Mechanical testing, Veterinary medicine, Protection against fire, Farming and forestry, Water quality, Microbiology, Metrology and measurement in general, Medical sciences and health care facilities in general, General methods of tests and analysis for food products, Environmental protection, Testing of metals, Analytical chemistry, Farm buildings, structures and installations, Protection against crime, Test conditions and procedures in general, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Measurement of volume, mass, density, viscosity, Petroleum products in general, Construction materials, Food products in general, Radiation protection, Nuclear energy engineering, Laboratory medicine, Vocabularies, Ferrous metals, Information technology (IT) in general, Internal combustion engines for road vehicles, Protection against electric shock, Electrical and electronic testing, Equipment for the chemical industry.

Professional Standard - Certification and Accreditation, Laboratory internal verification comparison

RB/T 208-2016 Internal quality control of chemical laboratory.Comparison test
RB/T 196-2015 Guidelines on internal audits of laboratory

Korean Agency for Technology and Standards (KATS), Laboratory internal verification comparison

KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS Q ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS Q ISO 14064-3:2006 Greenhouse gases－Part 3：Specification with guidance for the validation and verification of greenhouse gas assertions
KS B ISO 649-1:2017 Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification
KS M ISO 649-1:2001 Laboratory glassware－Density hydrometers for general purposes－Part 1：Specification
KS B ISO 649-1-2017(2022) Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification
KS A ISO/IEC GUIDE 43-1:2002 Proficiency testing by interlaboratory comparisons-Part 1:Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-1:2013 Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies

Association Francaise de Normalisation, Laboratory internal verification comparison

NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
XP CEN/TS 17329-1:2019 Denrées alimentaires - Lignes directrices générales pour la validation des méthodes de PCR qualitative en temps réel - Partie 1 : validation intralaboratoire
NF ISO 12828-2:2020 Méthode de validation des analyses de gaz d'incendie - Partie 2 : validation intralaboratoire des méthodes de quantification
NF EN ISO 22117:2019 Microbiologie de la chaîne alimentaire - Exigences spécifiques et recommandations relatives aux essais d'aptitude par comparaison interlaboratoires
NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
NF X65-040-2*NF ISO 12828-2:2020 Validation method for fire gas analysis - Part 2 : Intralaboratory validation of quantification methods
NF V08-304*NF EN ISO 22117:2019 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison
NF X06-510:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons.
XP V03-329-1*XP CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1 : single- laboratory validation
NF EN ISO 15212-1:1999 Densimètres à oscillations - Partie 1 : instruments de laboratoire
NF V08-103-5*NF EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 4 : protocol for method validation in a single laboratory
NF V08-103-4*NF EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4 : protocol for method validation in a single laboratory
NF EN ISO 16140-4:2020 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 4 : protocole pour la validation de méthodes dans un seul laboratoire
NF EN ISO 16140-5:2020 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 5 : protocole pour la validation interlaboratoires de méthodes non commerciales par plan factoriel
XP CEN/TS 17329-2:2019 Denrées alimentaires - Lignes directrices générales pour la validation des méthodes de PCR qualitative en temps réel - Partie 2 : étude interlaboratoires
NF EN ISO 16140-3:2021 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 3 : protocole pour la vérification dans un seul laboratoire de méthodes de référence et de méthodes alternatives validées
FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
FD V09-106:2013 Analyse sensorielle - Lignes directrices pour organiser et interpréter une comparaison intra laboratoire dans le cas de mesures hédoniques
NF V08-103-3*NF EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3 : protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
XP X65-040-3*XP ISO/TS 12828-3:2020 Validation method for fire gas analysis - Part 3 : considerations related to interlaboratory trials
XP ISO/TS 12828-3:2020 Méthode de validation des analyses de gaz d'incendie - Partie 3 : considérations relatives aux essais interlaboratoires
NF X43-283-4*NF EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4 : laboratory performance test based on comparison of concentrations

RU-GOST R, Laboratory internal verification comparison

GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
GOST R 8.692-2009 State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons
GOST R 53079.2-2008 Medical laboratory technologies. Quality assurance of clinical laboratory tests. Part 2. Guidelines for improvements of quality in clinical-diagnostic laboratory. Typical model
GOST ISO/TS 22117-2013 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
GOST R 8.690-2009 State system for ensuring the uniformity of measurements. Use of proficiency testing by interlaboratory comparisons for accreditation in testing
GOST R 53079.1-2008 Medical laboratory technologies. Quality assurance of clinical laboratory tests. Part 1. Rules for description of methods of clinical laboratory tests
GOST R 53133.2-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials
GOST R 53133.1-2008 Clinical laboratory technologies. Quality control of clinical laboratory tests. Part 1. Limits of allowable errors of the results of the analyte measurements in clinical-diagnostics laboratories
GOST R ISO 16000-28-2015 Indoor air. Part 28. Determination of odour emissions from building products using test chambers

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Laboratory internal verification comparison

GB/T 15483.2-1999 Proficiency testing by interlaboratory comparisons--Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
GB/T 28043-2011 Statistical methods for use in proficiency testing by interlaboratory comparisons
GB/T 15483.1-1999 Proficiency testing by interlaboratory comparisons--Part 1: Development and operation of proficiency testing schemes
GB/T 22275.1-2008 Requirements of conduct for Good Laboratory Practice (GLP). Part 1: Quality assurance and GLP
GB/T 22275.3-2008 Requirements of conduct for Good Laboratory Practice (GLP). Part 3: Compliance of laboratory suppliers with GLP principles
GB/T 29474-2012 General technical specification for the interior decoration material of mobile laboratory

International Organization for Standardization (ISO), Laboratory internal verification comparison

ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 16140-4:2020 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory
ISO 12828-2:2016 Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods
ISO 14064-3:2006 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions
ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
ISO 16140-5:2020 Microbiology of the food chain — Method validation — Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods
ISO/TS 12828-3:2020 Validation method for fire gas analysis — Part 3: Considerations related to interlaboratory trials
ISO/TS 17892-3:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
ISO 3675:1976 Crude petroleum and liquid petroleum products — Laboratory determination of density or relative density — Hydrometer method
ISO/TS 17892-3:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
ISO 16140-4:2020/DAmd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Validation of a larger test portion size for qualitative methods
ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison
ISO 16140-4:2020/CD Amd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Annex H - Validation of larger test portion size for qualitative methods
ISO/TS 17536-2:2017 Road vehicles - Aerosol separator performance test for internal combustion engines - Part 2: Laboratory test method

TH-TISI, Laboratory internal verification comparison

TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies
TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes

Danish Standards Foundation, Laboratory internal verification comparison

DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
DS/CEN/TS 14793:2007 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
DS/CEN ISO/TS 22117:2011 Microbiology of food and animal feeding stuffs – Specific requirements and guidance for proficiency testing by interlaboratory comparison
DS/EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
DS/CEN/TS 17329-1:2021 Foodstuffs – General guidelines for the validation of qualitative real-time PCR methods – Part 1: Single-laboratory validation
DS/ISO 16140-3:2021 Microbiology of the food chain â€” Method validation â€” Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
DS/EN ISO 16140-3:2021 Microbiology of the food chain – Method validation – Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
DS/IEC/TR 61010-3-020:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992, Particular requirements for laboratory centrifuges

ZA-SANS, Laboratory internal verification comparison

SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
SANS 14065:2007 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition

国家市场监督管理总局、中国国家标准化管理委员会, Laboratory internal verification comparison

GB/T 28043-2019 Statistical methods for use in proficiency testing by interlaboratory comparison

German Institute for Standardization, Laboratory internal verification comparison

DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
DIN CEN/TS 14793:2005 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method; German version CEN/TS 14793:2005
DIN EN ISO 22117:2019-08 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019); German version EN ISO 22117:2019
DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN ISO 13528:2020 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN 38402-45:2014 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN 38402-45:2003 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN 38402-45:2014-06 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN V 55394-1:2000 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes (ISO/IEC Guide 43-1:1997)
DIN EN ISO 22117:2019 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)
DIN CEN/TS 17329-1:2021-09 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation; German version CEN/TS 17329-1:2021
DIN EN ISO 16140-4:2020-12 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020); German version EN ISO 16140-4:2020
DIN ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons (ISO 13528:2005); Text in German and English
DIN EN ISO 16140-3:2018 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference and validated alternative methods implemented in a single laboratory (ISO/DIS 16140-3:2017); German and English version prEN ISO 16140-3:2017
DIN EN ISO 16140-5:2020-12 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020); German version EN ISO 16140-5:2020
DIN EN ISO 16140-3:2021-06 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021); German version EN ISO 16140-3:2021
DIN 12791-1:2019-12 Laboratory glassware - Density hydrometers - Part 1: General requirements
DIN 25425-2:1997 Radioisotope laboratories - Part 2: Internal radiation protection rules
DIN 58936-2:2001 Quality management in laboratory medicine - Part 2: Terminology for quality and application of test procedure
DIN 12791-2:1978 Laboratory glassware; density hydrometers, standard sizes, designations
DIN 12924-3:2011-01 Laboratory furniture - Fume cupboards - Part 3: Opposite-sided sash fume cupboards / Note: DIN 12924-3 (1993-04) remains valid alongside this standard until 2011-06-30.
DIN 12924-3:2023-06 Laboratory furniture - Fume cupboards - Part 3: Opposite-sided sash fume cupboards / Note: Date of issue 2023-04-28*Intended as replacement for DIN 12924-3 (2011-01).
DIN EN 12697-32:2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor; German and English version prEN 12697-32:2017
DIN EN 16101:2012 Water quality.Guidance standard on interlaboratory comparison studies for ecological assessment; German version EN 16101:2012
DIN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density, Pycnometer method (ISO/TS 17892-3:2004); German version CEN ISO/TS 17892-3:2004
DIN EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020); German version EN ISO 16140-4:2020

Sichuan Provincial Standard of the People's Republic of China, Laboratory internal verification comparison

DB51/T 2170-2016 Guidelines for Organizational Interlaboratory Comparisons

Taiwan Provincial Standard of the People's Republic of China, Laboratory internal verification comparison

CNS 15009-2006 Proficiency testing by interlaboratory comparisons
CNS 13286-1993 An Approach to the Review by a Certification Body of its Own Internal Quality System

British Standards Institution (BSI), Laboratory internal verification comparison

BS DD CEN/TS 14793:2005 Stationary source emission — Intralaboratory validation procedure for an alternative method compared to a reference method
BS DD CEN/TS 14793:2006 Stationary source emission. Intralaboratory validation procedure for an alternative method compared to a reference method
BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
BS EN ISO 22117:2019 Tracked Changes. Microbiology of the food chain. Specific requirements and guidance for proficiency testing by interlaboratory comparison
BS ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
BS ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
BS 6460-1:1983 Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories
BS EN 16101:2012 Water quality. Guidance standard on interlaboratory comparison studies for ecological assessment
BS PD CEN/TR 10350:2009 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
BS EN ISO 16140-3:2021 Microbiology of the food chain. Method validation. Protocol for the verification of reference methods and validated alternative methods in a single laboratory
BS DD CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
BS ISO/IEC TR 13233:1996 Information technology - Interpretation of accreditation requirements in ISO/IEC Guide 25 - Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services
20/30368425 DC BS EN ISO 14065. Greenhouse gases. Environmental information. Requirements for bodies validating and verifying environmental information

Group Standards of the People's Republic of China, Laboratory internal verification comparison

T/CAMA 74-2022 Guide for the implementation of interlaboratory comparison of agricultural machinery testing parameter
T/FDSA 022-2021 Food inspection and testing-General requirements for interlaboratory comparison
T/SCETIA 1001-2021 Specification for inter-laboratory comparison of construction engineering testing
T/LZZLXH 063-2021 Internal Calibration Specifications for Inspection and Testing Laboratories

Professional Standard - Commodity Inspection, Laboratory internal verification comparison

SN/T 2723.3-2010 Laboratory proficiency testing.Part 3: Format and content of proficiency testing report
SN/T 2723.1-2010 Laboratory proficiency testing.Part 1:General principles
SN/T 2723.2-2010 Laboratory proficiency testing.Part 2:Terms and glossary

Shandong Provincial Standard of the People's Republic of China, Laboratory internal verification comparison

DB37/T 4003-2020 Neutralization test and ELISA test comparison laboratory evaluation standard

ES-UNE, Laboratory internal verification comparison

UNE-EN ISO 22117:2020 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)
UNE-CEN/TS 17329-1:2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation (Endorsed by Asociación Española de Normalización in August of 2021.)
UNE-EN ISO 16140-4:2021 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
UNE-EN ISO 16140-5:2021 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
UNE-EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
UNE 400311-1:1998 ERRATUM:2011 Laboratory glassware. Density hydrometers for general purposes. Part 1: Specification.

API - American Petroleum Institute, Laboratory internal verification comparison

API REPORT 83-50-1985 Interlaboratory and Intralaboratory Comparision of the API Drilling Fluids Bioassay Protocol

海关总署, Laboratory internal verification comparison

SN/T 5557-2022 Implementation Guidelines for Inter-laboratory Comparisons in the Field of Phytosanitary

CEN - European Committee for Standardization, Laboratory internal verification comparison

PD CEN/TS 14793:2005 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
PD CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation
PREN 12697-32-2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Laboratory internal verification comparison

ASHRAE TO-98-15-1-1998 Experimental Validation of Thermal and Pressure Models in a Laboratory Simulator
ASHRAE AT-96-9-1996 Laboratory Internal Loads and Design Information
ASHRAE 4022-1997 Experimental Validation of a Numerical Model for an Internal Melt Ice-On-Coil Thermal Storage Tank
ASHRAE 4185-1998 Experimental Study of Free Convection at an Indoor Glazing Surface with a Venetian Blind (The Full Text of This Paper can be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 4@ Number 2@ April
ASHRAE LO-09-043-2009 A Comparative Study of the Effect of Initial Turbulence on the Performance of an Open Vertical Refrigerated Multi-Deck—A Numerical Study and its Experimental Validation

Professional Standard - Hygiene , Laboratory internal verification comparison

WS/T 420-2013 Verification of analytical performance of quantitative kits by clinical laboratory

European Committee for Standardization (CEN), Laboratory internal verification comparison

CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010)
EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
PD CEN/TR 10350:2009 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials

Lithuanian Standards Office , Laboratory internal verification comparison

LST EN 16101-2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
LST CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation
LST EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
LST EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
LST EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

AENOR, Laboratory internal verification comparison

UNE-EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
UNE-CEN ISO/TS 22117:2011 EX Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010)
UNE 400311-1:1998 LABORATORY GLASSWARE. DENSITY HYDROMETERS FOR GENERAL PURPOSES. PART 1: SPECIFICATION.

AT-ON, Laboratory internal verification comparison

ONR CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation
OENORM EN ISO 16140-4:2021 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
ONORM S 5260-1994 Quality assurance manual for testing laboratories for radiation measurements - Guidelines for contents and layout
OENORM EN ISO 16140-5:2021 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
OENORM EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

IT-UNI, Laboratory internal verification comparison

UNI CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation
UNI 2881-1945

US-CFR-file, Laboratory internal verification comparison

CFR 9-391.5-2014 Animals and animal products. Part391:Fees and charges for inspection services and laboratory accreditation. Section391.5:Laboratory accreditation fees.

US-FCR, Laboratory internal verification comparison

FCR COE ER 70-1-12-1978 IN-HOUSE LABORATORY INDEPENDENT RESEARCH PROGRAM

Yunnan Provincial Standard of the People's Republic of China, Laboratory internal verification comparison

DB53/T 681-2015 Testing Laboratory Internal Calibration Specifications

American Society for Testing and Materials (ASTM), Laboratory internal verification comparison

ASTM E1301-95e1 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM E1301-95(2003) Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM E2489-11 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E1012-12 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM E1012-12e1 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM E1012-14 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

Association of German Mechanical Engineers, Laboratory internal verification comparison

VDI 4221 Blatt 1-2015 Quality assurance - Requirements on interlaboratory tests in immission control - Requirements on providers of interlaboratory tests

HU-MSZT, Laboratory internal verification comparison

Standard Association of Australia （SAA）, Laboratory internal verification comparison

HB 18.43.2-1998 Guidelines for third-party certification and accreditation - Guide 43 - Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
AS 16140.3:2022 Microbiology of the food chain — Method validation, Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021, MOD)

National Aeronautics and Space Administration (NASA), Laboratory internal verification comparison

NASA NACA-TN-2662-1952 A summary of diagonal tension Part II : experimental evidence

Military Standard of the People's Republic of China-General Armament Department, Laboratory internal verification comparison

GJB 8671.15-2015 Test methods for metallic cartridges Part 15: Comparative test of internal ballistic performance

ACI - American Concrete Institute, Laboratory internal verification comparison

ACI SP-256-2008 Internal Curing of High Performance Concrete: Lab and Field Experiences

American Society of Quality Control （ASQC), Laboratory internal verification comparison

ASQ E14064-3-2006 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (T822E)

American National Standards Institute （ANSI), Laboratory internal verification comparison

ANSI/ISO/ASQ E14064-3:2006 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions

Professional Standard - Public Safety Standards, Laboratory internal verification comparison

GA/T 823.1-2018 Methods of Examination of Paint Evidence in Forensic Science Part 1: Color Comparison Test

CH-SNV, Laboratory internal verification comparison

SN EN ISO 16140-4:2021 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
SN EN ISO 16140-5:2021 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
SN EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

PL-PKN, Laboratory internal verification comparison

PN-EN ISO 16140-4-2021-01 E Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
PN-EN ISO 16140-5-2021-01 E Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for nonproprietary methods (ISO 16140-5:2020)
PN-EN ISO 16140-3-2021-07 E Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

Japanese Industrial Standards Committee (JISC), Laboratory internal verification comparison

JIS Q 0043-2:1998 Proficiency testing by interlaboratory comparisons -- Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies

Professional Standard - Agriculture, Laboratory internal verification comparison

CNAS-EL-21-2022 Instructions for Accreditation of Internal Laboratories of Group Enterprises (Trial Implementation)
CNAS-GL027:2023 Guidelines for Internal Quality Control in Chemical Analysis Laboratories - Application of Control Charts
CNAS-GL027：2023 Guidelines for Internal Quality Control in Chemical Analysis Laboratories - Application of Control Charts

IX-FAO, Laboratory internal verification comparison

CAC/GL 65-1997 Harmonized Guidelines for Internal Quality Control in Analytical Chemistry Laboratories
CAC/GL 65-1997(En) Identical Guidelines for Internal Quality Control in Chemical Analysis Laboratories

KR-KS, Laboratory internal verification comparison

KS P ISO 15198-2017(2022) Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer

Canadian Standards Association (CSA), Laboratory internal verification comparison

CSA ISO-14064-3-06-CAN/CSA:2006 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions First Edition

Indonesia Standards, Laboratory internal verification comparison

SNI ISO 15198:2009 Clinical laboratory medicine - In vitro diagnostic medical devices - validation of user quality control procedures by the manufacturer

AT-OVE/ON, Laboratory internal verification comparison

OVE E 8101-7-7N54-2020 Low-voltage electrical installations - Part 7N54 - Power supply of stationary experiment stands in classrooms

International Electrotechnical Commission (IEC), Laboratory internal verification comparison

IEC TR 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992 - Particular requirements for laboratory centrifuges