ZH
RU
ES

Comparative test evaluation method

Comparative test evaluation method, Total:500 items.

In the international standard classification, Comparative test evaluation method involves: Sensory analysis, Photography, Laboratory medicine, Measurement of volume, mass, density, viscosity, Refractories, Aerospace fluid systems and components, Paints and varnishes, Paint ingredients, Quality, Solar energy engineering, Fuels, Textile fibres, Footwear, Corrosion of metals, Inks. Printing inks, Water quality, Shipbuilding and marine structures in general, Electrical wires and cables, Crude petroleum, Insulating materials, Meat, meat products and other animal produce, Optoelectronics. Laser equipment, Construction materials, Aerospace electric equipment and systems, Products of the textile industry, Power stations in general, Petroleum products in general, Fluid power systems, Waxes, bituminous materials and other petroleum products, Soil quality. Pedology, Products of the chemical industry, Metrology and measurement in general, Earthworks. Excavations. Foundation construction. Underground works, Road engineering, Welding, brazing and soldering, Surface treatment and coating, Hydraulic construction, Materials for aerospace construction, Spices and condiments. Food additives, Optics and optical measurements, Electromechanical components for electronic and telecommunications equipment, Sports equipment and facilities, Thermodynamics and temperature measurements, Paper and board, Non-metalliferous minerals, Adhesives, Plastics, Refrigerating technology, Agricultural machines, implements and equipment, Protection against fire, Test conditions and procedures in general, Analytical chemistry, Glass, Leather technology, Fruits. Vegetables, Ergonomics, Materials and articles in contact with foodstuffs, Mechanical testing, Milk and milk products, Organic chemicals, Fishing and fish breeding, Domestic, commercial and industrial heating appliances, Raw materials for rubber and plastics, Wood, sawlogs and sawn timber, Wood-based panels, Equipment for the chemical industry, Rubber and plastics products, Air quality, TESTING, Pesticides and other agrochemicals, Processes of the textile industry, Measurement of force, weight and pressure, Environmental testing, Pharmaceutics, Valves, Ferroalloys, Powder metallurgy, Fibre optic communications, Rubber, Elements of buildings, Vocabularies, Testing of metals, Non-destructive testing, Non-ferrous metals, Paint coating equipment, Structures of buildings, Tobacco, tobacco products and related equipment, Packaging materials and accessories, Transformers. Reactors, Ventilators. Fans. Air-conditioners, Extraction and processing of petroleum and natural gas, Sterilization and disinfection, Inorganic chemicals, Pulps, Fasteners, Internal combustion engines, Internal combustion engines for road vehicles, Ceramics, Farming and forestry, Insulating fluids.

German Institute for Standardization, Comparative test evaluation method

DIN 10954:1997 Sensory testing methods - Paired comparison test
DIN EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006) English version of DIN EN ISO 5495:2007-10
DIN-Fachbericht 143:2005 Modern rheological test methods - Part 1: Determination of the yield point - Fundamentals and comparative testing methods
DIN EN 14845-1:2007 Test methods for fibres in concrete - Part 1: Reference concretes English version of DIN EN 14845-1:2007-09
DIN EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2004); German version EN ISO 10399:2010
DIN EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017); German version EN ISO 10399:2018
DIN ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons (ISO 13528:2005); Text in German and English
DIN 52106:2013 Testing of aggregates - Test methods for the assessment of the weathering resistance
DIN EN 3475-705:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement; German and English version EN 3475-705:2005
DIN 52106:2012 Testing of aggregates - Test methods for the assessment of the weathering resistance
DIN 52106:2004 Testing of aggregates - Test methods for the assessment of the weathering resistance
DIN 55986:1981 Testing of pigments; determination of relative tinting strength and colour difference after colour reduction; colorimetric method
DIN 51907:2013 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN 969:1997 Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results
DIN 52102:2013-10 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
DIN EN 3745-705:2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement; German and English version EN 3745-705:2007

VN-TCVN, Comparative test evaluation method

TCVN 7501-2005 Bitumen.Test method for determination of density (Pycnometer method)
TCVN 4831-2009 Sensory analysis.Methodology.Paired comparison test
TCVN 7502-2005 Bitumen.Test method for determination of kinematic viscosity

Association Francaise de Normalisation, Comparative test evaluation method

NF V09-020:2010 Sensory analysis - Methodology - Duo-trio test.
NF V09-012*NF EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test
NF V09-012:1983 Sensory analysis. Methodology. Paired comparison test.
NF V09-012/A1*NF EN ISO 5495/A1:2016 Sensory analysis - Methodology - Paired comparison test
NF V09-020:1992 Sensory analysis. Methodology. Duo-trio test.
NF R15-602-1:1991 Road vehicles. Cooling fluids. Test methods. Part 1 : measurement of density using an areameter.
NF EN 12130:2018 Plumes et duvets - Méthodes d'essais - Détermination du pouvoir gonflant (volume massique)
NF L52-250-705:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705 : contrast measurement.
NF C20-470:1980 Test Methods Basic Environmental Testing Procedures An Appraisal of the Problems of Accelerated Testing for Atmospheric Corrosion
NF G07-124:1991 Textiles. Testing fabrics. Observation method for checks requiring a visual assessment in comparison with standard ranges.
NF G62-022:2005 Footwear - Test methods for the assessment of ecological criteria.
NF G62-022*NF EN 14602:2012 Footwear - Test methods for the assessment of ecological criteria
NF X45-302:2000 Filter cartridges - Test methods - Determination of differential pressure versus flowrate.
NF P98-522:1991 Road traffic signs. Decors for traffic signs. Test method for measuring colorimetric characteristics.
NF L52-250-705*NF EN 3475-705:2022 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705 : contrast measurement
NF M07-071-1:2006 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1 : test method.
NF L52-400-705*NF EN 3745-705:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705 : contrast measurement

British Standards Institution (BSI), Comparative test evaluation method

BS EN ISO 10399:2004 Sensory analysis. Methodology. Duo-trio test
BS EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test
BS EN ISO 5495:2006 Sensory analysis. Methodology. Paired comparison test
BS 3900-A19:1998 Methods of test for paints. Determination of density by the pyknometer method
BS 3483-A1:1983 Methods for testing pigments for paints - Comparison of colour
BS 5131-6.1:1981 Methods of test for footwear and footwear materials - Codes of practice - Code of practice for the comparative evaluation by wear trial of materials, components or constructions
BS 4401-12:1979 Methods of test for meat and meat products - Determination of starch content of meat products (reference method)
BS EN 3475-705:2005 Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
BS EN 3475-705:2006 Aerospace series. Cable, electrical, aircraft use. Test methods. Contrast measurement
BS 4401-13:1979 Methods of test for meat and meat products - Determination of glucono-delta-lactone content (reference method)
BS 1881-130:1996 Testing concrete - Method for temperature-matched curing of concrete specimens
BS 4140-8:1986 Methods of test for aluminium oxide. Determination of absolute density using a pyknometer
BS 4585-8:1977 Methods of test for spices and condiments - Determination of degree of fineness of grinding - hand sieving method (reference method)
BS 3900-J6:1993 Methods of test for paints - Testing of coating powders - Determination of density of coating powders by gas comparison pyknometer (referee method)
BS 3483-C7:1980 Methods for testing pigments for paints - Comparison of resistance to bleeding
BS 3900-G6:1989 Methods of test for paints - Assessment of resistance to fungal growth
BS 3900-D11:1998 Methods of test for paints - Optical tests on paint films - Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate
BS 5131 Sec.6.1:1981 Methods of test for footwear and footwear materials. Codes of practice. Code of practice for the comparative evaluation by wear trial of materials, components or constructions
BS EN 15664-2:2010 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Test waters
BS 1743-6.1:1983 Methods for analysis of dried milk and dried milk products - Assessment of the heat class of dried milk - Heat number method (reference method)
BS EN 3745-705:2007 Aerospace series — Fibres and cables, optical, aircraft use — Test methods — Part 705: Contrast measurement
BS EN 14395-1:2004 Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Test method
BS 5711-19:1979 Methods of sampling and test for glycerol - Assessment of odour
BS EN 12272-2:2004 Surface dressing - Test methods - Visual assessment of defects
BS EN 12272-2:2003 Surface dressing - Test methods - Part 2:Visual assessment of defects
BS 2000-12:1993 Methods of test for petroleum and its products - Determination of specific energy
BS 3900-E19:1999 Methods of test for paints - Determination of film hardness by pencil test
BS EN ISO 787-10:1993 General methods of test for pigments and extenders - Determination of density - Pyknometer method
BS 3755:1964 Methods of test for the assessment of odour from packaging materials used for foodstuffs
BS 5738:1980 Methods of test for evaluation of vulcanization characteristics for raw natural rubbers
BS EN ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes
BS 1881-127:1990 Testing concrete - Method of verifying the performance of a concrete cube compression machine using the comparative cube test
BS EN 689:1996 Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy

RU-GOST R, Comparative test evaluation method

GOST ISO 10399-2015 Organoleptic analysis. Methodology. Duo-trio test
GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST 27851-1988 Hydraulic drive volumetric pumps. Accelerated comparative life tests
GOST R 57712-2017 Polymer composites. Test method for determination of specific heat
GOST 33670-2015 Single road vehicles. Test methods for compliance assessment
GOST ISO 12863-2013 Cigarettes. Standard test method for assessing the ignition propensity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Comparative test evaluation method

GB/T 12682-1990 Test method for comparing colour stabilities of colour photographic images
GB/T 6099.1-1985 Test method for maturity of cotton fibres--Lumen and wall thickness constract method
GB/T 11259-1999 Standard practice for fabrication and control of steel reference blocks used in ultrasonic inspection
GB/T 5441.8-1985 Test methods for communication cable--Test for frequency characteristic of attenuation coefficient of coaxial pair--Comparison method
GB/T 8424.2-2001 Textiles-Tests for colour fastness-Instrumental assessment of relative whiteness
GB/T 29617-2013 Determination of density,relative density,and API gravity of liquids by digital density meter
GB/T 7702.21-1997 Standard test method for granular activated carbon from coal--Determination of specific surface area
GB/T 16913.10-1997 Methods of dust character test--Part 10: Determination of electrical resistivity--Disk method
GB/T 14768-2015 Test method at 45°and assessment of carpets burning behavior
GB/T 14768-1993 Carpets burning behaviour. Test method at 45°and assessment
GB/T 14634.6-2002 Test methods of rare earth three-band phosphors for fluorescent lamps-Determination of specific surface area
GB/T 21224-2007 Methods of test for the evaluation of water treeing in insulating materials
GB/T 17752-1999 Test and evaluation methods on fuel-saving additives of auto-fuel
GB/T 16913.2-1997 Methods of dust character test--Part 2: Determination of effective density--Pyknometer method

Standard Association of Australia （SAA）, Comparative test evaluation method

AS 2542.2.4:2005 Sensory analysis - Specific methods - Duo-trio test
AS 2542.2.1:2007 Sensory analysis - Specific methods - Paired comparison test
AS 1580.213.2:2004 Paints and related materials - Methods of test - Dry hiding power - Contrast ratio
AS 1580.202.3:2005 Paints and related materials - Methods of test - Determination of specific gravity of liquids by hydrometer
AS/NZS 1301.452rp:2006 Methods of test for pulp and paper - Determination of weight factors by the comparison method
AS 1141.14:2007 Methods for sampling and testing aggregates - Particle shape, by proportional caliper
AS 1289.5.4.3:2006 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values

Group Standards of the People's Republic of China, Comparative test evaluation method

T/GDAQI 84-2022 Methodological comparison and evaluation of the accuracy of in vitro diagnostic reagents
T/ZNX 018-2021 Test method for the determination of the activity of algae control agents on Microcystis aeruginosa

International Organization for Standardization (ISO), Comparative test evaluation method

ISO 10399:2004 Sensory analysis - Methodology - Duo-trio test
ISO 10399:2017 Sensory analysis - Methodology - Duo-trio test
ISO 10399:1991 Sensory analysis; methodology; duo-trio test
ISO 5495:2005 Sensory analysis - Methodology - Paired comparison test
ISO 5495:1983 Sensory analysis; Methodology; Paired comparison test
ISO 20462-2:2005 Photography - Psychophysical experimental methods for estimating image quality - Part 2: Triplet comparison method
ISO 5495:2005/Amd 1:2016 Sensory analysis — Methodology — Paired comparison test — Amendment 1
ISO 5495:2005/Cor 1:2006 Sensory analysis - Methodology - Paired comparison test; Technical Corrigendum 1
ISO 787-17:1973 General methods of test for pigments - Part XVII: Comparison of lightening power of white pigments
ISO 18861:2020 Cosmetics — Sun protection test methods — Percentage of water resistance
ISO 5725:1986 Precision of test methods; Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
ISO 10349-11:1992 Photography; photographic-grade chemicals; test methods; part 11: determination of specific gravity
ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes
ISO 12863:2022 Standard test method for assessing the ignition propensity of cigarettes
ISO/TS 24498:2022 Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons

Korean Agency for Technology and Standards (KATS), Comparative test evaluation method

KS Q ISO 10399:2009 Sensory analysis－Methodology－Duo-trio test
KS Q ISO 5495:2009 Sensory analysis-Methodology-Paired comparison test
KS Q ISO 5495-2009(2019) Sensory analysis－Methodology－Paired comparison test
KS A ISO 20462-2:2007 Photography－Psychophysical experimental methods for estimating image quality－Part 2：Triplet comparison method
KS V 3986-2012(2017) Test method of evaluating performance for oil skimmer
KS B 0519-1994 Method of qualification test for welding procedure
KS B 0519-2004 Method of qualification test for welding procedure
KS V 3986-2012(2022) Test method of evaluating performance for oil skimmer
KS F 2549-1997 Testing method for potential volume change of cement-aggregate combinations
KS M 1915-2002(2007) Phthalic anhydride for industrial use－Methods of test－Determination of 1,4-naphthaquinone content－Colorimetric method
KS B 6513-1991(2016) Test Methods for Electro-hydraulic Proportional Directional Bypass Flow Control Va1ves
KS K 0890-2016 Test method for antibacterial activity assessment of textile materials：Parallel streak method
KS B 6513-1991(2021) Test Methods for Electro-hydraulic Proportional Directional Bypass Flow Control Va1ves
KS M 5975-1994 Testing method for evaluating degree of cracking of dried film of paints
KS M 5973-2007 Testing method for evaluating degree of blistering of dried film of paints
KS K 0125-2021 Test method for visual assessment and grading of barré
KS D ISO 7087-2003(2018) Ferroalloys－Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
KS D 0407-2004(2019) Method if evaluation test of wire feedability for gas metal arc welding
KS K 0757-2015 Test method for effects of temperature on stability of geotextiles

American Society for Testing and Materials (ASTM), Comparative test evaluation method

ASTM D1217-93(2003)e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D344-97(2004) Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
ASTM D344-97 Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
ASTM D344-11 Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM E903-96 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
ASTM D6446-99 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
ASTM D6446-01 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
ASTM D1480-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM E1422-05 Standard Guide for Test Methods for Forensic Writing Ink Comparison
ASTM D1217-93(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D5472-93(2005) Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM D5472/D5472M-14 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM D1480-02e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-07 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM F1763-96 Standard Test Methods for Measuring Contrast of a Linear Polarizer
ASTM D1298-99e1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D5374-93(2005) Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5374-22a Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D1657-22 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM F1833-97 Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
ASTM F1833-97(2006) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
ASTM F1833-97(2011) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
ASTM C128-22 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ASTM C127-15 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
ASTM C128-15 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ASTM D2320-98(2008) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D2320-98(2012) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D4468-85(2006) Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
ASTM D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D3142-05 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D6822-12b(2017)e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D6034-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM E126-05 Standard Test Method for Inspection and Verification of Hydrometers
ASTM E126-05a Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM C604-18 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D1657-12e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D1657-02 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D7172-14 Standard Test Method for Determining the Relative Density 40;Specific Gravity41; and Absorption of Fine Aggregates Using Infrared
ASTM D1657-22e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D6790/D6790M-16 Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
ASTM D1481-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-91 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-02(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM C604-02(2007) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-02 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-98 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D4892-89(2004) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM C604-02(2007)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D6822-12b Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D854-00 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-00e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-02 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D5550-23 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D2745-00(2008) Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
ASTM D5374-93(1999) Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM E126-12 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E126-13a Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
ASTM D4052-22 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D1298-12b(2017) Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D4892-14 Standard Test Method for Density of Solid Pitch 40;Helium Pycnometer Method41;
ASTM D6034-96 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM D6034-96(2004) Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM F2277-03(2010) Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
ASTM F1570-94 Standard Test Method for Determining the Tactile Ratio of a Membrane Switch
ASTM F1570-01 Standard Test Method for Determining the Tactile Ratio of a Membrane Switch
ASTM D4319-93 Standard Test Method for Distribution Ratios by the Short-Term Batch Method
ASTM D5188-04 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D5188-04a Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D431-84 Standard test method for determination of distribution ratio by short-term batch method
ASTM D6131-17(2023) Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
ASTM C128-07a Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C128-07 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C128-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C127-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
ASTM D1480-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D3359-23 Standard Test Methods for Rating Adhesion by Tape Test
ASTM D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D1657-12 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D1657-12(2017) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D4052-15 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM E2726/E2726M-12 Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
ASTM E2726/E2726M-12a(2017) Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
ASTM F1880-98(2004) Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM F1880-98 Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM F1880-98e1 Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM C729-05 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM F1880-09 Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM D3424-01 Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
ASTM D3424-98 Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
ASTM D7584-10(2015) Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue to the Growth of Fungi in an Environmental Chamber
ASTM C127-07 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
ASTM E1225-99 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM E2926-13 Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence lpar;micro;-XRFrpar; Spectrometry
ASTM F2010-00 Standard Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test
ASTM F2010-00(2005) Standard Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test
ASTM D2281-68(2005) Standard Test Method for Evaluation of Wetting Agents by the Skein Test
ASTM D2281-68(1997) Standard Test Method for Evaluation of Wetting Agents by the Skein Test
ASTM D3359-22 Standard Test Methods for Rating Adhesion by Tape Test
ASTM D3359-17 Standard Test Methods for Rating Adhesion by Tape Test
ASTM D2281-10(2016) Standard Test Method for Evaluation of Wetting Agents by the Skein Test
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM G176-03(2017) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM D4838-88(2003) Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
ASTM D5009-02(2005) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-96(2002) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-96 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D4590-09 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
ASTM D4590-13 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha;ndash;Methylstyrene) by Spectrophotometry
ASTM D5188-99 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D5188-09 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D4578-06(2012) Standard Test Methods for Rubber Chemicalsmdash;Determination of Percent Sulfur by Extraction
ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1883-02(2015) Standard Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique
ASTM F1880-09(2013) Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM C127-04 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
ASTM D2395-17 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D2395-14 Standard Test Methods for Density and Specific Gravity 40;Relative Density41; of Wood and Wood-Based Materials
ASTM D2395-14e1 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D1657-02(2007) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D5374-22 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5374-13 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5009-02(2011) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02(2017) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D6073-08a Standard Test Method for Relative Setting of Heatset Printing Inks
ASTM D6073-08a(2013) Standard Test Method for Relative Setting of Heatset Printing Inks
ASTM D6110-04e1 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D4590-06 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
ASTM D854-06e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM C135-96(2022) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM E1347-06(2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM D854-14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D5188-13 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D5188-10a Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D5188-10 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D6131-97(2004) Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
ASTM E981-04 Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals
ASTM D6131-97 Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
ASTM D6131-97(2012) Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
ASTM E981-04(2012) Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals
ASTM D6131-17 Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
ASTM E2966-14 Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet
ASTM D7236-07 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D2885-13 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM E816-05(2010) Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM D2485-91(2007) Standard Test Methods for Evaluating Coatings For High Temperature Service
ASTM E1163-98 Standard Test Method for Estimating Acute Oral Toxicity in Rats
ASTM G122-96(2002) Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM G122-96 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM E1163-98(2002) Standard Test Method for Estimating Acute Oral Toxicity in Rats
ASTM E1395-90(2004) Standard Test Method for Sensory Evaluation of Low Heat Chilies
ASTM E1395-90(1997)e2 Standard Test Method for Sensory Evaluation of Low Heat Chilies
ASTM G122-96(2008) Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM F2278-10a(2014) Standard Test Method for Evaluating Paintball Barrier Netting
ASTM F2278-19 Standard Test Method for Evaluating Paintball Barrier Netting
ASTM D6677-18(2022) Standard Test Method for Evaluating Adhesion by Knife
ASTM F2278-03 Standard Test Method for Evaluating Paintball Barrier Netting
ASTM F2278-10 Standard Test Method for Evaluating Paintball Barrier Netting
ASTM E1483-92(2004) Standard Test Method for Assessing Developmental Toxicity in Rats and Rabbits
ASTM D5860-95(2022) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
ASTM D6790-02 Standard Test Method for Determining Poisson''s Ratio of Honeycomb Cores
ASTM D6935-11 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
ASTM D6790/D6790M-22 Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
ASTM D4590-95A Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
ASTM D4590-00 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
ASTM D6093-97 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6093-97(2003) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D660-93 Standard Test Method for Evaluating Degree of Checking of Exterior Paints
ASTM D660-93(2019) Standard Test Method for Evaluating Degree of Checking of Exterior Paints
ASTM D4838-88(2016) Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
ASTM D4838-88(2010) Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
ASTM D1043-99 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-02 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-09 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D4578-06(2021) Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction
ASTM B922-10 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C135-96(2003) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM C135-96(2009)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM E2716-23 Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
ASTM D5860-95(2007) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
ASTM D5860-95 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
ASTM D5860-95(2002) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
ASTM D6762-18 Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
ASTM D3801-06 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D3801-96e1 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D5188-16 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
ASTM D1329-08 Standard Test Method for Evaluating Rubber Propertyx2014;Retraction at Lower Temperatures (TR Test)
ASTM D6600-00(2023) Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
ASTM D6600-00(2017) Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
ASTM E2726/E2726M-12a Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
ASTM E699-99 Standard Criteria for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating Building Components in Accordance with Test Methods Promulgated by ASTM Committee E-6
ASTM E6-23a Red Standard Terminology Relating to Methods of Mechanical Testing (Standard + Redline PDF Bundle)
ASTM E6-08a Standard Terminology Relating to Methods of Mechanical Testing
ASTM E6-09 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E6-09a Standard Terminology Relating to Methods of Mechanical Testing
ASTM E6-02a Standard Terminology Relating to Methods of Mechanical Testing
ASTM E6-08 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E699-16 Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components
ASTM E699-03(2008) Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
ASTM E803-91 Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams
ASTM E803-91(2013) Standard Test Method for Determining the L/D?Ratio of Neutron Radiography Beams
ASTM D4669-18 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
ASTM D5821-13 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D5821-13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D5913-96(2003) Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM E1589-05 Standard Test Method for Evaluation of First Aid Antiseptic Drug Products
ASTM D714-87(2000) Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM C1357-04 Standard Test Methods for Evaluating Masonry Bond Strength
ASTM C1357-04a Standard Test Methods for Evaluating Masonry Bond Strength
ASTM C1357-02 Standard Test Methods for Evaluating Masonry Bond Strength
ASTM D5913-96 Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM C1357-98a Standard Test Methods for Evaluating Masonry Bond Strength
ASTM D5913-96(2009)e1 Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM E1589-05(2015) Standard Test Method for Evaluation of First Aid Antiseptic Drug Products
ASTM G122-96(2015)e1 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM D86-18 Standard Test Method for Evaluating Degree of Settling of Paint
ASTM D869-21 Standard Test Method for Evaluating Degree of Settling of Paint
ASTM D5913-96(2019) Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM C1357-09 Standard Test Methods for Evaluating Masonry Bond Strength
ASTM E1054-08(2013) Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents
ASTM D5913-96(2013) Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D5661-95 Standard Test Method for Relative Solvency of Petroleum Oils by the PKP Method
ASTM D5873-00 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM C1274-00(2006) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM D4578-06 Standard Test Methods for Rubber Chemicals8212;Determination of Percent Sulfur by Extraction
ASTM B430-97(2001) Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM B430-97 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM B430-97(2001)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM B430-97(2006)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-00 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-95 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-10 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM B923-20 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B923-21 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM C1274-12 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM B922-22 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-12(2020) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM D789-05 Standard Test Methods for Determination of Relative Viscosity of Polyamide (PA) ^1,2
ASTM D3316-06 Standard Test Method for Stability of Perchloroethylene with Copper
ASTM D789-04 Standard Test Method for Determination of Relative Viscosity of Polyamide (PA)
ASTM D1534-95 Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
ASTM D1534-95(2002)e1 Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
ASTM D1534-95(2008) Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration

European Committee for Standardization (CEN), Comparative test evaluation method

EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test
EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006)
EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test
EN ISO 5495:2007/A1:2016 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005/Amd 1:2016)
EN 13523-22:2017 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
EN 13523-22:2010 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
EN 13523-3:2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
EN 13523-3:2021 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
EN ISO 18861:2021 Cosmetics - Sun protection test methods - Percentage of water resistance (ISO 18861:2020)
CEN ISO/TR 26369:2009 Cosmetics - Sun protection test methods - Review and evaluation of methods to assess the photoprotection of sun protection products
EN 15664-2:2010 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 2: Test waters

Danish Standards Foundation, Comparative test evaluation method

DS/EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test
DS/CEN/CR 13902:2000 Test methods for determining the water/cement ratio of fresh concrete
DS/ISO 5725:1982 Precision of test methods. Determination of repeatability and reproducibility by interlaboratory tests
DS/EN 3475-705:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
DS/EN 3745-705:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement

Society of Automotive Engineers (SAE), Comparative test evaluation method

SAE ARP1974-1986 Clamps, Support, Comparative Fatigue Strengths, Test Method

Military Standard of the People's Republic of China-General Armament Department, Comparative test evaluation method

GJB 570.4-1988 Data acquisition and processing of dynamic comparison test of meteorological instrument finalization test method
GJB 772.106-1989 Explosives test method Poisson's ratio determination
GJB 8671.15-2015 Test methods for metallic cartridges Part 15: Comparative test of internal ballistic performance
GJB 4196-2001 Method for evaluating the kill probability of anti-air missile weapon system flight test
GJB 772.309-1993 Test Methods for Explosives Specific Heat Capacity Determination Microcaloric Calorimetry
GJB 1534-1992 Torpedo lake and sea test evaluation method
GJB 1534A-2020 Torpedo lake and sea test evaluation method
GJB 1534A-2004 Torpedo sea acceptance test evaluation method
GJB 737.8-1993 Test methods for pyrotechnics. Determination of specific heat capacity. Microcalorimetric method.
GJB 737.9-1993 Test method for pyrotechnics agent Gas specific volume determination Pressure sensor method
GJB 592.26-1988 Test method for evaluating the firing effectiveness of naval gun weapon systems against fixed targets at sea
GJB 8684.5-2015 Pyrotechnic powder performance test methods Part 5: Pressure sensor method for specific volume determination

American National Standards Institute （ANSI), Comparative test evaluation method

ANSI/ASTM F1833:1997 Test Method for Comparison of Rearfoot Motion Control Properties of Running
ANSI/ASTM E1362:1999 Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
ANSI/ASTM F2277:2012 Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
ANSI/ASTM D5374:1999 Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ANSI/ASTM F1880:2009 Test Method for the Determination of Percent of Let-Off for Archery Bows
ANSI/ASHRAE 24-2013 Methods of Testing for Rating Liquid Coolers
ANSI/ASTM E2554:2013 Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
ANSI/ASHRAE 146-2011 Methods of Testing and Rating Pool Heaters
ANSI/ASTM D4669:1998 Polyurethane Raw Materials, Determination of Specific Gravity of Polyols, Method for Testing (08.03)
ANSI/AMCA 610-2006 Methods of Testing Airflow Measurement Stations for Rating
ANSI/ASTM D4659:1998 Polyurethane-Isocyanate Raw Materials, Determination of Specific Gravity, Method for Testing (11.01)
ANSI/ASTM E1125:1999 Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovolatic Reference Cells Using a Tabular Spectrum
ANSI/TIA/EIA 455-69-A-1991 Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers
ANSI/ASTM E2632:2013 Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials
ANSI/AMCA 240-1996 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/AMCA 240-2006 Laboratory Method of Testing Positive Pressure Ventilators for Rating

Canadian General Standards Board （CGSB), Comparative test evaluation method

CGSB 1-GP-71 METH 14.7-1982 Methodes D'Essai Des Peintures Et Pigments Pouvoir Couvrant Methode Du Rapport De Contraste

Professional Standard - Ferrous Metallurgy, Comparative test evaluation method

YB/T 4454-2015 Contrast test method for the corrosion rate of the embedded steel reinforcement in concrete exposed to the simulated marine enviroments

PL-PKN, Comparative test evaluation method

PN BN 7469-03-1965 Printing inks Methods of testing Determination of specific density
PN C89085-03-1987 Epoxy resins Methods of testing Determination of density (specific gravity)
PN C82055-11-1989 Test methods of pressed carbon products Determination of thermal specific conductivity with comparative method
PN C89082-03-1986 Unsaturated polyester resins Methods of testing Determination of density (specific gravity)

机械工业部, Comparative test evaluation method

JB/T 7913-1995 Preparation and verification methods of steel comparison test blocks for ultrasonic testing

TR-TSE, Comparative test evaluation method

TS 1087-1972 METHOD OF TEST FOR SPBCIFIC GRAVTTY OF BnUMINOUS MATERIALS

Professional Standard - Electricity, Comparative test evaluation method

DL/T 1287-2013 Determination of electrical resistivity of coal ash in laboratory

Indonesia Standards, Comparative test evaluation method

SNI 03-6873-2002 Test methods of determining density percentage in a fast way
SNI 7619-2012 Metode uji penentuan persentase butir pecah pada agregat kasar

CZ-CSN, Comparative test evaluation method

CSN 34 6468-1990 Test methods of solid insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions

IN-BIS, Comparative test evaluation method

CEN - European Committee for Standardization, Comparative test evaluation method

EN ISO 787-17:2017 General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments
EN ISO 787-17:2019 General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments

Professional Standard - Geology, Comparative test evaluation method

DZ/T 0064.67-1993 Groundwater quality testing method Determination of sulfide by p-aminodimethylaniline colorimetric method
DZ/T 0064.57-1993 Groundwater quality testing method Nessler's reagent colorimetric method for the determination of ammonium ions

Japanese Industrial Standards Committee (JISC), Comparative test evaluation method

JIS K 7114:1995 Testing method for evaluation of the resistance of plastics to chemical substances
JIS K 5101-3-2:2004 Test methods for pigments -- Part 3: Tinting strength -- Section 2: Determination of relative tinting strength of white pigments -- Visual comparison method
JIS L 0886:1992 Testing methods for the detection and assessment of photochromism
JIS L 0886:1998 Test methods for the detection and assessment of photochromism
JIS B 8657:2002 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8655:1989 Test methods for electro-hydraulic proportional directional series flow control valves
JIS B 8657:1989 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8655:2002 Test methods for electro-hydraulic proportional directional series flow control valves
JIS Z 2254:1996 Method of determining the plastic strain ratio for metallic sheet and strip

工业和信息化部, Comparative test evaluation method

JB/T 13425-2018 Test methods for reliability assessment of threshing machines

European Association of Aerospace Industries, Comparative test evaluation method

AECMA PREN 3475-705-1996 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 705: Contrast Measurement
AECMA PREN 3475-705-1999 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 705: Contrast Measurement Edition P 1
AECMA PREN 3475-705-2004 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 705: Contrast Measurement Edition P 2

Professional Standard - Railway, Comparative test evaluation method

TB/T 2769.9-1997 Test methods and evaluation standards for dynamic performance of heavy-duty railcars
TB/T 1537-1997 Test and evaluation method of thermal insulation performance of thermal insulation vehicle
TB/T 1960-1987 Load test evaluation method of cast steel side frame of freight wagon

Professional Standard - Aquaculture, Comparative test evaluation method

SC/T 6080-2015 Test and evaluation methods on fuel additives of fishing boat fuel

Professional Standard - Building Materials, Comparative test evaluation method

JC/T 578-2009 Method for assessing the uniformity of cement strength
JC/T 578-1995 Test method of measuring uniformity of cement strength

AASHTO - American Association of State Highway and Transportation Officials, Comparative test evaluation method

TP 61-2002 Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate
T 335-2009 Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate
TP 72-2008 Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA)
T 362-2016 Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA)
TP39-1994 Standard Test Method for Determining the Maximum Specific Gravity of Bituminous Paving Mixtures

Professional Standard - Petrochemical Industry, Comparative test evaluation method

SH/T 0533-1992 Corrosion evaluation method of anti-rust grease anti-rust test piece

中国石油化工总公司, Comparative test evaluation method

SH/T 0533-1993 Method for evaluating rust of anti-rust grease and anti-rust test pieces

CENELEC - European Committee for Electrotechnical Standardization, Comparative test evaluation method

DD ENV 61072-1993 Methods of Test for Evaluating the Resistance of Insulating Materials Against the Initiation of Electrical Trees

Professional Standard - Civil Aviation, Comparative test evaluation method

MH/T 6103-2014 Test method for evaluating the effectiveness of cleaning agents

Professional Standard - Electron, Comparative test evaluation method

SJ 1284-1977 Methods for evaluation of corrosion test results for metallic coatings and chemically treated layers

Professional Standard - Aviation, Comparative test evaluation method

HB 5403-1988 Wedge test method for evaluation of bond durability
HB 5390-1987 Laser holographic determination of Poisson's ratio test method for non-metallic structural materials

Lithuanian Standards Office , Comparative test evaluation method

LST EN 3475-705-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
LST EN 3745-705-2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement

TH-TISI, Comparative test evaluation method

TIS 1182 Pt.3-1994 STANDARD TEST METHODS FOR PETROLEUM AND PETROLEUM PRODUCTS.PART 3 DETERMINATION OF DENSITY,RELATIVE DENSITY OR API GRAVITY-HYDROMETER METHOD
TIS 1182.3-1994 Standard test methods for petroleum and petroleum products.part 3: determination of density, relative density or api gravity.hydrometer method

Institute of Electrical and Electronics Engineers (IEEE), Comparative test evaluation method

IEEE Std C57.100-1986 Test procedure for thermal evaluation of oil-immersed distribution transformers

Professional Standard-Ships, Comparative test evaluation method

CB* 3351-1988 Bending test method and evaluation of ship welded joints

Professional Standard - Machinery, Comparative test evaluation method

JB/T 12034-2015 Injector nozzle reliability test.Assessment methods, test methods and failure judgment

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Comparative test evaluation method

GJB 5384.5-2005 Test methods of performance for pyrotechnic composition Part 5: Determination of specific volume. Pressure sensor method

European Committee for Electrotechnical Standardization（CENELEC）, Comparative test evaluation method

HD 490.2-1987 Methods of Test for Winding Wires Part 2: Determination of Dimensions
HD 490.2 S2-1993 Methods of Test for Winding Wires Part 2: Determination of Dimensions