ZH
RU
ES

Various pressure testing machines

Various pressure testing machines, Total:499 items.

In the international standard classification, Various pressure testing machines involves: Mechanical testing, Installations in buildings, Kitchen equipment, Domestic, commercial and industrial heating appliances, Burners. Boilers, Chipless working equipment, Gas and steam turbines. Steam engines, Freight distribution of goods, Ground service and maintenance equipment, Non-destructive testing, Fluid storage devices, Testing of metals, Aerospace fluid systems and components, Fluid power systems, Measurement of force, weight and pressure, Internal combustion engines, Transformers. Reactors, Construction materials, Hydraulic energy engineering, Valves, Diagnostic, maintenance and test equipment, Tyres, Packaging and distribution of goods in general, Measurement of volume, mass, density, viscosity, Explosion protection, Glass, Leather technology, Compressors and pneumatic machines, Lubrication systems, Electrical accessories, Adhesives, Elements of buildings, Agricultural machines, implements and equipment, Equipment for the rubber and plastics industries, Insulating materials, Earth-moving machinery, Components and accessories for telecommunications equipment, Fuels, Electrical wires and cables, Components for electrical equipment, Internal combustion engines for road vehicles, Footwear, Pipeline components and pipelines, Electrical engineering in general, Rubber, Plastics, Insulation, Rotating machinery, Lubricants, industrial oils and related products, Paper and board, Extraction and processing of petroleum and natural gas, Textile machinery, Acoustics and acoustic measurements, Welding, brazing and soldering, Petroleum products in general, Heat pumps, Products of the chemical industry, Surface treatment and coating, Safety of machinery, Refrigerating technology, Vocabularies, Road engineering, Aircraft and space vehicles in general, On-board equipment and instruments, Accident and disaster control, Electromechanical components for electronic and telecommunications equipment, Railway rolling stock, Materials and components for railway engineering, Hospital equipment, Protective equipment, Products of the textile industry, Protection against fire, Rubber and plastics products.


Korean Agency for Technology and Standards (KATS), Various pressure testing machines

  • KS B 5533-1993 Compression testing machines
  • KS B 4059-2021 Mechanical power presses — Testing of the accuracy
  • KS B 4059-2001(2021) Mechanical power presses－Testing of the accuracy
  • KS B 4059-2001(2016) Mechanical power presses－Testing of the accuracy
  • KS B 4059-1986 Mechanical power presses－Testing of the accuracy
  • KS T ISO 12048:2013 Packaging ― Complete, filled transport packages ― Compression and stacking test using a compression tester
  • KS T ISO 12048:2008 Packaging-Complete, filled transport packages-Compression and stacking tests using a compression tester
  • KS B ISO 6899-2007(2012) Acceptance conditions of open front mechanical power presses－Testing of the accuracy
  • KS K 0500-1995 Testing method for the pilling in woven fabrics pressure method
  • KS B ISO 4965-2003(2018)
  • KS W 0651-2001(2011) Aircraft－Pressure fuel dispensing system－Test procedure andlimit value for shut-off surge pressure
  • KS M ISO 17230-2007(2017) Leather－Physical and mechanical tests－Determination of water penetration pressure
  • KS M ISO 17230:2007 Leather－Physical and mechanical tests－Determination of water penetration pressure
  • KS M ISO 17230-2007(2022) Leather－Physical and mechanical tests－Determination of water penetration pressure
  • KS M ISO 5893:2005 Rubber and plastics test equipment-Tensile, flexural and compression types(constant rate of traverse)-Specification
  • KS M ISO 5893:2015 Rubber and plastics test equipment－Tensile, flexural and compression types(constant rate of traverse)－Specification
  • KS C IEC 61558-2-9:2005 Safety of power transformers, power supply units and similar products-Part 2-9:Particular requirements for transformers for class III handlamps for tungsten filament lamps
  • KS B ISO 7500-1-2003(2008) Metallic materials－Verification of static uniaxial testing machines－Part 1：Tension/compression testing machines－Verification and calibration of the force-measuring system
  • KS B ISO OECD 789-10-2011(2021) Agricultural tractors－Test procedures－Part 10：Hydraulic power at tractors/implement interface
  • KS B ISO OECD 789-10-2011(2016) Agricultural tractors－Test procedures－Part 10：Hydraulic power at tractors/implement interface
  • KS C IEC 61558-2-12:2005 Safety of power transformers, power supply units and similar devices-Part 2-12:Particular requirements for constant voltage transformers
  • KS R ISO 9818-2004(2019) Passenger cars－Engine cooling systems－Test methods and marking of pressure caps
  • KS B ISO 7500-1:2003 Metallic materials-Verification of static uniaxial testing machines-Part 1:Tension/compression testing machines-Verification and calibration of the force-measuring system
  • KS B ISO 7500-1:2013 Metallic materials－Verification of static uniaxial testing machines－Part 1：Tension/compression testing machines－Verification and calibration of the force-measuring system
  • KS D ISO 10332-2002(2018)
  • KS C IEC 61558-2-23:2005 Safety of power transformers, power supply units and similar devices－Part 2－23：Particular requirements for transformers for construction sites
  • KS C IEC 61558-2-23:2017 Safety of power transformers, power supply units and similar devices－Part 2－23：Particular requirements for transformers for construction sites
  • KS M ISO 3458:2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leak tightness under internal pressure
  • KS M ISO 3501:2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
  • KS C IEC 61558-6:2002 Safety of power transformers, power supply units and similar--Part 1：General requirements and tests
  • KS W ISO 9662:2002 Aircraft equipment－Environmental and operating conditions for airborne equipment－Humidity, temperature and pressure tests
  • KS C IEC 60512-2-2004(2009) Electromechanical components for electronic eqipment－Basic testing procedures and measuring methods－Part 2：General examination, electrical continuity and contact resistance tests, insulation tests and
  • KS C IEC 61238-1:2021 Compression and mechanical connectors for power cables for rated voltages up to 30 kV(Um = 36 kV) — Part 1: Test methods and requirements
  • KS R ISO 4548-1-2002(2017) Methods of test for full-flow lubricating oil filters for internal combustion engines－Part 1：Differential pressure/flow characteristics
  • KS C IEC 60512-2:2004 Electromechanical components for electronic eqipment-Basic testing procedures and measuring methods-Part 2:General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
  • KS C IEC 60512-2:2014 Electromechanical components for electronic eqipment-Basic testing procedures and measuring methods-Part 2:General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
  • KS C IEC 61238-1-2006(2016) Compression and mechanical connectors for power cables for rated voltages up to 30 kV(Um＝36 kV)－Part 1：Test methods and requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Various pressure testing machines

  • GB/T 3722-1992 Hydraulic compression testing machines
  • GB/T 8117.2-2008 Rules for steam turbine thermal acceptance tests.Part 2:Method B.Wide range of accuracy for various types and sizes of turbines
  • GB/T 16825.1-2002 Verification of static uniaxial testing machines--Part 1: Tension/compression testing machines--Verification and calibration of the force-measuring system
  • GB/T 16825.1-2008 Inspection of static uniaxial testing machines - Part 1: Inspection and calibration of force measuring systems of tensile and/or compressive testing machines
  • GB/T 17200-1997 Requirements for tensile, flexural and compression testing machines for rubbers and plastics
  • GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part1:Tension/compression testing machines—Calibration and verification of the force-measuring system
  • GB/T 4857.16-1990 Basic tests for transport packages--Stacking test using compression tester
  • GB/T 4857.4-2008 Packaging. Basic tests for transport packages. Part 4: Compression and stacking tests using a compression tester
  • GB/T 17200-2008 Technical specification for tensile, compression and flexural testing machines for rubber an plastics (constant rate of traverse)
  • GB/T 3871.4-1993 Test methods for agricultural wheeled and tracklaying tractors . Part 4: Hydraulic lifting capacity and power tests
  • GB/T 19727-2005 Forestry machinery-Backpack power units for brush-cutters,grass-trimmers,pole-cutters and similar appliances-Safety requirements and testing
  • GB 19727-2005 Forestry machinery-Backpack power units for brush-cutters,grass-trimmers,pole-cutters and similar appliances-Safety requirements and testing
  • GB 19212.1-2003 Safety of power transformers,power supply units and similar--Part 1: General requirements and tests
  • GB 19212.1-2008 Safety of power transformers, power supplies,reactors and similar products.Part 1: General requirements and tests
  • GB/T 17454.3-2008 Safety of machinery.Pressure-sensitive protective devices.Part 3:General principles for design and testing of pressure-sensitive bumpers,plates,wires and similar devices
  • GB/T 13877.5-2003 Tractors and self-propelled machines for agriculture and forestry--Operator enclosure environment--Part 5: Pressurization system test method
  • GB/T 19212.8-2012 Safety of power transformers, power supplies, reactors and similar products - Part 8:Particular requirements and tests for transformers and power supplies for toys
  • GB 19212.8-2012 Safety of power transformers,power supplies,reactors and similar products.Part 8:Particular requirements and tests for transformers and power supplies for toys
  • GB/T 9327-2008 Test methods and requirements for crimping and mechanical connecting fittings for conductors of power cables with rated voltage 35kV (Um=40.5kV) and below
  • GB/T 5095.2-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests

Association Francaise de Normalisation, Various pressure testing machines

  • NF D30-500/IN1:2009 Test gases - Test pressures - Appliance categories.
  • NF D30-500:2009 Test gases - Test pressures - Appliance categories.
  • NF D30-500:1994 Test gases - Test pressures - Appliances categories.
  • NF D30-500/A1:1997 Test gases - Test pressures - Appliances categories.
  • NF E29-697:2005 Gas cylinders - Residual pressure valves - General requirements and type testing.
  • NF E29-697/A1:2008 Gas cylinders - Residual pressure valves - General requirements and type testing.
  • NF E38-135:1988 Mechanical steam compression systems driven with electric motor. Test methods.
  • NF P78-407*NF EN 13541:2012 Glass in building - Security glazing - Testing and classification of resistance against explosion pressure.
  • NF EN ISO 17230:2011 Cuir - Essais physiques et mécaniques - Détermination de la pression de pénétration de l'eau
  • NF EN 62006:2011 Machines hydrauliques - Essais de réception des petits aménagements hydroélectriques
  • NF C55-553-2*NF EN 60953-2:2003 Rules for steam turbine thermal acceptance tests - Part 2 : method B - Wide range of accuracy for various types and sizes of turbines
  • NF E37-400-6:2013 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: static burst pressure test
  • NF E48-382:1990 Hydraulic fluid power. Determinaiton of characteristics of motors. Part 2 : startability.
  • NF R63-302*NF EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation/deflation of tyres for motor vehicles - Metrology, requirements and testing
  • NF U03-021:1975 Agricultural tractors and self-propelled machines-. Test method for cab pressurization systems.
  • NF P18-411:1981 Concretes. Common characteristics of hydraulic machines for compression, bending, and tension testing of hard materials.
  • NF C32-011-508*NF EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508 : mechanical tests - Pressure test at high temperature for insulation and sheaths
  • NF A03-002-1:2005 Metallic materials - Verification of static uniaxial testing machines - Part 1: tension/compression testing machines - Verification and calibration of the force measuring system
  • NF E29-699/A1*NF EN ISO 22435/A1:2013 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing - Amendment 1
  • NF T54-010*NF EN ISO 3458:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure
  • NF C32-011-508/A1*NF EN 60811-508/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508 : mechanical tests - Pressure test at high temperature for insulation and sheaths
  • NF E37-400-13*NF ISO 4548-13:2013 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 13: static burst pressure test for composite filters housings
  • NF C52-558-1*NF EN 61558-1:2006 Safety of power transformers, power supplies, reactors and similar products - Part 1 : general requirements and tests
  • NF E37-406:1988 Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 6 : static burst pressure test.
  • NF EN ISO 3459:2022 Systèmes de canalisations en matières plastiques - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression négative
  • NF EN ISO 3458:2015 Systèmes de canalisations en plastique - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression interne
  • NF C52-558-2-9*NF EN 61558-2-9:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9 : particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps.
  • NF EN 60811-508/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 508 : essais mécaniques - Essai de pression à température élevée pour enveloppes isolantes et les gaines
  • NF EN 60811-508:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 508 : essais mécaniques - Essai de pression à température élevée pour les enveloppes isolantes et les gaines
  • NF T54-008*NF EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • NF C93-537-3-15*NF EN 50289-3-15:2003 Communication cables - Specifications for test methods - Part 3-15 : mechanical test methods - Underwater cable resistance to hydrostatic pressure
  • NF A89-701-3*NF EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for welding and cutting - Part 3 : calibration of instruments for measurement of gas flow and pressure.
  • NF C52-558-1/A1:2005 Safety of power transformers, power supply units and similar - Part 1 : general requirements and tests.
  • NF T54-012:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
  • NF T54-012*NF EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
  • NF E38-115:2011 Heat pumps with electrically driven compressors - Testing and requirements for marking of domestic hot water units.
  • NF E35-451:1998 Liquid chilling packages and heat pumps with electrically driven compressors. Cooling mode. Definitions, testing and requirements.
  • NF T54-008:1994 Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending.
  • NF F19-809-3:1997 Railway rolling stock. "Extreme pressure" oils for mechanical transmissions of motive power units. Part 3 : high thermal stability oil. Endurance test method on fixed post machine.
  • NF F19-505:1991 Matériel roulant ferroviaire - Méthode d'essais des graisses pour boîtes d'essieux à roulements - Essai de résistance aux vibrations, aux chocs, à la rotation et aux pressions sur banc "Ropecacs".
  • NF C52-558-2-14*NF EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14 : particular requirements and tests for variable transofrmers and power supply units incorporating variable transformers
  • NF EN ISO 3503:2015 Systèmes de canalisations en plastique - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression interne de montages soumis à une courbure
  • NF E09-040-3*NF EN ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3 : general principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
  • NF T54-007*NF EN ISO 3501:2022 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force
  • NF EN ISO 3501:2022 Systèmes de canalisations en plastique - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai de résistance à l'arrachement sous une force longitudinale constante
  • NF C33-038-1*NF EN 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1 : test methods and requirements.
  • NF T54-007:1994 Thermoplastics piping systmes. End-load bearing mechanical joints between pressure pipes and fittings. Test method for resistance to pull-out under constant longitudinal force.
  • NF C52-558-2-2*NF EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2 : particular requirements and tests for control transformers and power supplies incorporating control transformers

British Standards Institution (BSI), Various pressure testing machines

  • BS EN 437:2003 Test gases - Test pressures - Appliance categories
  • BS EN 437:2003+A1:2009 Tests gases - Test pressures - Appliance categories
  • BS EN ISO 12048:2001 Packaging. Complete, filled transport packages. Compression and stacking tests using a compression tester
  • 2C 11-1989 Specification for ground pressure test connections for aircraft pressure cabins
  • BS EN 60953-2:1996 Rules for steam turbine thermal acceptance tests - Wide range of accuracy for various types and sizes of turbines
  • BS EN IEC 60953-0:2022 Rules for steam turbine thermal acceptance tests - Wide range of accuracy for various types and sizes of turbines
  • BS EN 62006:2011 Hydraulic machines. Acceptance tests of small hydroelectric installations
  • BS EN 12645:1999 Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing
  • 20/30414814 DC BS EN 60953-0. Rules for steam turbine thermal acceptance tests. Part 0. Wide range of accuracy for various types and sizes of turbines
  • 18/30382788 DC BS EN 60953-0. Rules for steam turbine thermal acceptance tests. Part 0. Wide range of accuracy for various types and sizes of turbines
  • BS EN 14289:2003 Leather - Physical and mechanical tests - Determination of water penetration pressure
  • BS EN 14289:2004 Leather - Physical and mechanical tests - Determination of water penetration pressure
  • BS EN ISO 17230:2011 Leather. Physical and mechanical tests. Determination of water penetration pressure
  • BS EN 1760-1:1997 Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
  • BS EN 1760-1+A1:1998 Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
  • BS EN 60811-508:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Pressure test at high temperature for insulation and sheaths
  • BS EN ISO 22435:2007+A1:2012 Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
  • 23/30429595 DC BS ISO 22484. Displacement and dynamic compressors. Performance test code for electric driven low-pressure air compressor packages
  • BS EN 12645:2014 Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
  • BS EN 50289-3-15:2003 Communication cables - Specifications for test methods - Mechanical test methods - Underwater cable resistance to hydrostatic pressure
  • BS EN 1760-1:1997+A1:2009 Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
  • BS EN 61558-2-9:2011 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
  • BS EN 60811-508:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - Mechanical tests. Pressure test at high temperature for insulation and sheaths
  • BS EN ISO 7500-1:2018 Tracked Changes. Metallic materials. Calibration and verification of static uniaxial testing machines. Tension/compression testing machines. Calibration and verification of the force-measuring system
  • BS EN ISO 7500-1:2004 Metallic materials. Verification of static uniaxial testing machines. Tension/compression testing machines. Verification and calibration of the force-measuring system
  • BS EN 61558-1:1998 Safety of power transformers, power supply units and similar - General requirements and tests
  • BS EN 61558-1+A1:2006 Safety of power transformers, power supplies, reactors and similar products - General requirements and tests
  • BS 2782-3 Method 346A:1984 Methods of testing plastics - Mechanical properties - Determination of cohesion between layers of laminated tube
  • BS EN ISO 3458:2015 Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure
  • BS EN ISO 7500-1:2015 Metallic materials. Calibration and verification of static uniaxial testing machines. Tension/compression testing machines. Calibration and verification of the force-measuring system
  • BS EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof. Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
  • BS 5944-2:1992 Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for motors
  • BS EN 61558-1:2005+A1:2009 Safety of power transformers, power supplies, reactors and similar products — Part 1: General requirements and tests
  • BS ISO 4548-13:2023 Methods of test for full-flow lubricating oil filters for internal combustion engines - Static burst pressure test for composite filter housings
  • BS EN ISO 3503:2015 Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
  • BS EN 61558-1:2005 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
  • BS EN 61558-2-20:2011 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for small reactors
  • BS ISO 4548-6:2021 Tracked Changes. Methods of test for full-flow lubricating oil filters for internal combustion engines. Static burst pressure test
  • BS EN ISO 3459:2015 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under negative pressure
  • BS ISO 4548-13:2013 Methods of test for full-flow lubricating oil filters for internal combustion engines. Static burst pressure test for composite filter housings
  • BS EN 713:1995 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • 21/30429636 DC BS EN ISO 3459. Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under negative pressure
  • BS EN 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Test methods and requirements
  • BS EN ISO 3459:2022 Tracked Changes. Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under negative pressure
  • BS EN ISO 3501:2015 Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for resistance to pull-out under constant longitudinal force
  • BS EN ISO 15616-3:2003 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
  • 14/30313767 DC BS EN 61238-1-3. Compression and mechanical connectors for power cables. Part 1-3. Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on s...
  • BS EN 1760-3:2004 Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
  • BS EN 1760-3+A1:2004 Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
  • BS 7403-6:1991 Full-flow lubricating oil filters for internal combustion engines - Method of test for static burst pressure
  • BS EN 61558-2-7:2007 Safety of power transformers, power supplies, reactors and similar products - Particular requirements and tests for transformers and power supplies for toys
  • 20/30387828 DC BS EN ISO 4548-6. Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 6. Static burst pressure test
  • 21/30429640 DC BS EN ISO 3501. Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for resistance to pull-out under constant longitudinal force
  • BS EN ISO 3501:2022 Tracked Changes. Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for resistance to pull-out under constant longitudinal force

Danish Standards Foundation, Various pressure testing machines

  • DS/EN 437:1994 Test gasses-Test pressures-Appliance categories
  • DS/EN 62006:2011 Hydraulic machines - Acceptance tests of small hydroelectric installations
  • DS/EN 60953-2:1996 Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines
  • DS/EN ISO 17230:2011 Leather - Physical and mechanical tests - Determination of water penetration pressure
  • DS/EN ISO 7500-1/AC:2009 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
  • DS/EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
  • DS/EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
  • DS/ISO 789/2:1983 Agricultural tractors. Test procedures. Part 2: Hydraulic power and lifting capacity
  • DS/EN 713:1995 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • DS/IEC 512-2:1987 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
  • DS/EN 61558-2-7:2008 Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys
  • DS/EN 911:1996 Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure

BE-NBN, Various pressure testing machines

  • NBN-EN 437-1994 Test gases. Test pressures. Appliance catagories
  • NBN-EN 10002-2-1992 Metallic materials - Tensile testing - Part 2 : Verification of the force measuring system of the tensile testing machines
  • NBN X 07-001-1987 Classification and càlibration of material testing machines -Machines for compression, bending and tensile tests
  • NBN EN 713-1994 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • NBN EN 712-1994 Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force

PL-PKN, Various pressure testing machines

  • PN-EN 437-2021-09 E Test gases -- Test pressures -- Appliance categories
  • PN E04063-11-1987 On-load tap-changers Test methods Mechanical endurance test
  • PN N01356-1991 Vibrations. Piezoelectric accelerometers for measurement of human response to mechanica vibrations. Requirements and tests

KR-KS, Various pressure testing machines

  • KS B 4059-2022 Mechanical power presses — Testing of the accuracy
  • KS R ISO 4548-6-2023 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 6: Static burst pressure test
  • KS C IEC 61238-1-1-2023 Compression and mechanical connectors for power cables — Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV(Um = 1.2 kV) t
  • KS M ISO 3458-2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leak tightness under internal pressure
  • KS C IEC 61238-1-3-2023 Compression and mechanical connectors for power cables — Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV(Um = 1.2 kV) u
  • KS M ISO 3501-2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
  • KS C IEC 61558-1-2017 Safety of power transformers, power supply units and similar－Part 1：General requirements and tests
  • KS C IEC 61238-1-2021 Compression and mechanical connectors for power cables for rated voltages up to 30 kV(Um = 36 kV) — Part 1: Test methods and requirements
  • KS C IEC 61238-1-2-2023 Compression and mechanical connectors for power cables — Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV(Um = 1.2 kV) tested o

Professional Standard - Machinery, Various pressure testing machines

  • JB/T 5523-1991 Hydraulic spring pressure testing machine
  • JB/T 8843.2-1999 Pressure alarm for internal-combustion engine - Test method
  • JB/T 8839.2-1999 Magnetoelectric pressure gauge for internal-combustion engine - Test method
  • JB/T 6580.2-1999 Open press Performance requirement and test method
  • JB/T 8763-2001 Specifications for the electro-hydraulic compression testing machines for cement
  • JB/T 8763-2013 Electro-hydraulic servo compression testing machines for cement.Technical specification
  • JB/T 3165-1999 Thermodynamic performance test for centrifugal&axial blower and compressor
  • JB/T 6580.2-2014 Open front mechanical power press.Part 2: Performance requirement and testing methods
  • JB/T 7785-2007 Evaluation method of insulation system's life by acceleration test for low-voltage electrical machines (Step stress method)
  • JB/T 7785-1995 Rapid test evaluation method for life of low-voltage motor insulation structure (step stress method)

German Institute for Standardization, Various pressure testing machines

  • DIN ISO 11:1997 Aircraft - Ground pressure testing connections for pressure cabins (ISO 11:1987)
  • DIN 51302-2:2000 Materials testing machines - Strain cylinder test method for compression testing machines for concrete
  • DIN 16001:2017 Mechanical pressure and temperature gauges - High pressure gauges - Dimensions, Metrology, Requirements and Testing
  • DIN EN ISO 15996:2008 Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005+Amd 1:2007)(includes Amendment A1:2007); English version of DIN EN ISO 15996:2008-04
  • DIN 16002:2017 Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing
  • DIN ISO 4548-6:1990 Internal combustion engines; methods of test for full-flow lubricating oil filters; static burst pressure test; identical with ISO 4548-6:19855
  • DIN EN 13541:2012 Glass in building - Security glazing - Testing and classification of resistance against explosion pressure; German version EN 13541:2012
  • DIN 1945-1:1980-11 Displacement compressor; thermodynamic acceptance and performance test
  • DIN 16003:2018 Mechanical pressure and temperature gauges - Differential pressure gauges - Dimensions, metrology, requirements and testing
  • DIN EN 437:2009 Test gases - Test pressures - Appliance categories(includes Amendment A1:2009); English version of DIN EN 437:2009-09
  • DIN EN ISO 7500-1 Bb.3:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing mac
  • DIN EN ISO 7500-1 Bb.2:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing mach
  • DIN EN ISO 7500-1 Beiblatt 4:2013-03 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system; Supplement 4: Information for taking the uncertainty into account regardi...
  • DIN EN ISO 7500-1 Beiblatt 2:2021 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 2: General for requirements, verification and calibration of spr
  • DIN EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004); German version EN ISO 7500-1:2004
  • DIN EN ISO 7500-1 Bb.3:2012 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 3: General information for requirements, verification and calibr
  • DIN 41640-80:1988 Measuring methods and testing procedures for electromechanical components; test A: contact force, resilient female contacts
  • DIN EN ISO 7500-1:2018-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018); German version EN ISO 7500-1:2018
  • DIN EN ISO 7500-1 Bb.1:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compressio
  • DIN EN 50289-3-15:2004 Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods - Underwater cable resistance to hydrostatic pressure; German version EN 50289-3-15:2003
  • DIN EN 12645:2015 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing; German version EN 12645:2014
  • DIN EN ISO 7500-1 Beiblatt 1:2021 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 1: General for requirements, verification and calibration of ten
  • DIN EN ISO 7500-1 Bb.4:2013 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system; Supplement 4: Information for taking the uncertainty into account regarding
  • DIN EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
  • DIN 51514:1996 Testing of lubricants - Determination of the mixture gap of refrigerator oil in refrigerants by pressure tube method
  • DIN EN 61558-1:1998 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests (IEC 61558-1:1997, modified); German version EN 61558-1:1997
  • DIN EN ISO 3459:2022-07 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022); German and English version EN ISO 3459:2022
  • DIN EN ISO 3458:2015-08 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015); German and English version EN ISO 3458:2015
  • DIN 33831-3:1989 Heat pumps; ready to use heat pump units with internal combustion engine driven compressors; rating and performance testing conditions
  • DIN EN ISO 7500-1 Beiblatt 3:2023-03 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 3: General information for requirements, veri...
  • DIN EN ISO 7500-1 Beiblatt 2:2022-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 2: General for requirements, verification and...
  • DIN EN ISO 7500-1 Beiblatt 4:2013 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system; Supplement 4: Information for taking the uncertainty into account regarding
  • DIN EN ISO 7500-1 Beiblatt 1:2022-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 1: General for requirements, calibration and ...
  • DIN EN ISO 17230:2011 Leather - Physical and mechanical tests - Determination of water penetration pressure (ISO 17230:2006); German version EN ISO 17230:2011
  • DIN EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths (IEC 60811-508:2012); German version EN 60811-508:2012
  • DIN EN 16147:2011 Heat pumps with electrically driven compressors - Testing and requirements for marking of domestic hot water units; German version EN 16147:2011
  • DIN EN ISO 15616-3:2003 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003
  • DIN EN 61238-1:2004 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1: Test methods and requirements (IEC 61238-1:2003); German version EN 61238-1:2003
  • DIN EN ISO 3503:2015-06 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
  • DIN EN ISO 7500-1:2016 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2015); German version EN ISO 7500-1:2015
  • DIN EN IEC 61238-1-1:2020 Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors (IEC 61238-1-1:2018)
  • DIN EN 712:1994 Thermoplastics piping systems; end-load bearing mechanical joints between pressure pipes and fittings; test method for resistance to pull-out under constant longitudinal force; German version EN 712:1993

European Committee for Standardization (CEN), Various pressure testing machines

  • prEN 437-1990 Appliances using combustible gases; test gases, test pressure and categories of appliances
  • EN 437:2003 Test gases - Test pressures - Appliance categories (Incorporates Amendment A1: 2009)
  • EN 12645:1998 Pressure Gauges - Apparatus for Inspection of Pressure and/or Inflation of Tyres for Motor Vehicles - Metrology, Requirements and Testing
  • EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
  • EN 22874:1992 Packaging - Complete, Filled Transport Packages - Stacking Test Using Compression Tester
  • EN 14289:2003 Leather Physical and mechanical tests Determination of water penetration pressure
  • EN ISO 17230:2011 Leather - Physical and mechanical tests - Determination of water penetration pressure (ISO 17230:2006)
  • EN 13541:2000 Glass in Building - Security Glazing - Testing and Classification of Resistance Against Explosion Pressure
  • EN ISO 7500-1:1999 Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines ISO 7500-1:1999
  • EN ISO 7500-1:2015 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force- measuring system (ISO 7500-1:2015)
  • EN 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
  • EN ISO 7500-1:2018 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
  • EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
  • EN 713:1993 Plastics Piping Systems - Mechanical Joints Between Fittings and Polyolefin Pressure Pipes - Test Method for Leaktightness Under Internal Pressure of Assemblies Subjected to Bending
  • EN 3-8:2006 Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
  • EN 3-8:2021 Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
  • EN ISO 3501:2022 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force (ISO 3501:2021)

Japanese Industrial Standards Committee (JISC), Various pressure testing machines

  • JIS Z 2342:2003 Methods for acoustic emission testing of pressure vessels during pressure tests and classification of test results
  • JIS B 7733:1997 Verification of the force measuring system of the compression testing machine
  • JIS B 7721:2009 Tension/compression testing machines -- Verification and calibration of the force-measuring system
  • JIS B 7721:2018 Tension/compression testing machines -- Calibration and verification of the force-measuring system
  • JIS B 8348:2002 Hydraulic fluid power -- Pumps and motors -- Test methods
  • JIS B 7721:2002 Verification and calibration of the force measuring system of the tension/compression testing machines
  • JIS K 6557-5:2016 Leather -- Physical and mechanical tests -- Determination of water penetration pressure
  • JIS P 8131:1995 Paper and board -- Determination of bursting strength by Mullen high-pressure tester
  • JIS C 61558-1:2008 Safety of power transformers, power supplies, reactors and similar products -- Part 1: General requirements and tests
  • JIS W 0814:2002 Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests
  • JIS B 8384:2011 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance

National Metrological Verification Regulations of the People's Republic of China, Various pressure testing machines

  • JJG 139-2014 Tension, Compression and Universal Testing Machines
  • JJG 139-1999 Verification Regulation of Universal Tension and Compression Testing Machine
  • JJG 157-2008 Verification Regulation of Universal Tension and Compression Testing Machines for Non-metallic
  • JJG 157-1995 Verification Regulation of Tension Compression and Universal Testing Machina for Non-metallic

International Organization for Standardization (ISO), Various pressure testing machines

  • ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
  • ISO 11:1980 Aircraft — Pressure cabin ground test connections
  • ISO 17230:2006 Leather - Physical and mechanical tests - Determination of water penetration pressure
  • ISO 17230:2006 | IULTCS/IUP 45 Leather — Physical and mechanical tests — Determination of water penetration pressure
  • ISO 4548-6:1985 Methods of test for full-flow lubricating oil filters for internal combustion engines; Part 6 : Static burst pressure test
  • ISO 4548-6:2021 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
  • ISO 4548-6:2012 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
  • ISO 12048:1994 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester
  • ISO 789-2:1983 Agricultural tractors — Test procedures — Part 2: Hydraulic power and lifting capacity
  • ISO 5893:2002 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification
  • ISO 789-2:1979 Title missing - Legacy paper document
  • ISO 7500-1:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
  • ISO 4548-6:1985/Cor 1:1990 Methods of test for full-flow lubricating oil filters for internal combustion engines; part 6: static burst pressure test; technical corrigendum 1
  • ISO 3459:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
  • ISO 3459:1976 Polyethylene (PE) pressure pipes; Joints assembled with mechanical fittings; Internal under-pressure test method and requirement
  • ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
  • ISO 7500-1:2015 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
  • ISO 4548-13:2013 Methods of test for full-flow lubricating oil filters for internal combustion engines.Part 13: Static burst pressure test for composite filter housings
  • ISO 7500-1:2004/Cor 1:2008 Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system TECHNICAL CORRIGENDUM 1
  • ISO 3459:2022 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
  • ISO 9662:1994 Aircraft equipment; environmental and operating conditions for airborne equipment; humidity, temperature and pressure tests
  • ISO/DIS 4548-13 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 13: Static burst pressure test for composite filter housings
  • ISO/PRF 4548-13:2023 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 13: Static burst pressure test for composite filter housings
  • ISO 4548-13:2023 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 13: Static burst pressure test for composite filter housings
  • ISO 3501:2021 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
  • ISO 4020-2:1979 Road vehicles — Fuel filters for automotive compression ignition engines — Part 2: Test values and classification
  • ISO/TR 9310:1987 Road vehicles; Smoke measurement of compression-ignition (diesel) engines; Survey of short in-service tests

Taiwan Provincial Standard of the People's Republic of China, Various pressure testing machines

  • CNS 9466-1982 Test Device for Cylinder Pressure of Gasoline Engine
  • CNS 9467-1982 Method Test for Test Device for Cylinder Pressure of Gasoline Engine
  • CNS 9800-2001 Production test for pressure vessels

Group Standards of the People's Republic of China, Various pressure testing machines

  • T/CGMA 042011-2020 Automatic pressure testing machine for valve
  • T/CASEI 33001-2019 Specifications for pressure testing machine for metal valve type test
  • T/CCMA 0035-2015 Reliability test method, fault classification and evaluation to installed hydraulic components for hydraulic excavator
  • T/CCAS 005-2018 Validation and comprehensive evaluation specification of automatic compression testing machine for cement-mortar

Professional Standard - Railway, Various pressure testing machines

  • TB/T 2516-1995 Test method for overvoltage of electric locomotive
  • TB/T 2540-1995 Test method for exhaust air volume of air compressors for internal combustion and electric locomotives
  • TB/T 2522-1995 Test method for temperature rise of main transformer of electric locomotive after loading
  • TB/T 1384-2003 Testing method for turbocharger of locomotive diesel engine
  • TB/T 2791-1997 Specifications for test benches for multi-piston air compressors for internal combustion and electric locomotives

Professional Standard - Aviation, Various pressure testing machines

  • HB 6668-1992 Basic dimensions of joint end for ground pressure test of aircraft pressure chamber
  • HB 5871.6-1985 Pressure test of test method for transport package of aviation auxiliary equipment products
  • HB 8600-2021 General requirements for stress calculation of aircraft low-speed pressurized wind tunnel high Reynolds number test model

European Committee for Electrotechnical Standardization（CENELEC）, Various pressure testing machines

  • EN 60953-2:1995 Rules for Steam Turbine Thermal Acceptance Tests Part 2: Method B Wide Range of Accuracy for Various Types and Sizes of Turbines
  • EN 62006:2011 Hydraulic machines - Acceptance tests of small hydroelectric installations
  • EN 61558-1:1997 Safety of Power Transformers, Power Supply Units and Similar - Part 1: General Requirements and Tests (Incorporates Amendments A1: 2002 and A11: 2003; Remains Current)
  • EN 50289-3-15:2003 Communication cables Specifications for test methods Part 3-15: Mechanical test methods Underwater cable resistance to hydrostatic pressure

International Electrotechnical Commission (IEC), Various pressure testing machines

  • IEC 60953-2:1990 Rules for steam turbine thermal acceptance tests; part 2: method B; wide range of accuracy for various types and sizes of turbines
  • IEC 60953-0:2022 Rules for steam turbine thermal acceptance tests - Part 0: Wide range of accuracy for various types and sizes of turbines
  • IEC 62006:2010 Hydraulic machines - Acceptance tests of small hydroelectric installations
  • IEC 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
  • IEC 60811-508:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
  • IEC 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations therof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
  • IEC 61558-2-14:2012 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14: Particular requirements and test for variable transformers and power supply units incorporating variable transformers
  • IEC 60811-508:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
  • IEC 61558-2-9:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
  • IEC 61558-1:1998 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests
  • IEC 60811-508:2012/AMD1:2017 Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
  • IEC 61558-1:2005+AMD1:2009 CSV Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
  • IEC 61238-1-1:2018 Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
  • IEC 61558-1:2009 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
  • IEC 61558-1:2005/COR3:2011 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
  • IEC 61558-1:2005 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
  • IEC 61238-1-3:2018 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on non-insulated conduc
  • IEC 60512-2:1985 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 2 : General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
  • IEC 61558-1 INT 1:2003 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests; Interpretation sheet 1
  • IEC 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 30 kV (U<(Index)m>=36 kV) - Part 1: Test methods and requirements
  • IEC 61558-1/AMD1:1998 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests; Amendment 1
  • IEC 61558-1:2005/COR1:2008 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests; Corrigendum 1
  • IEC 60512-2/AMD1:1994 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests; Amendment 1
  • IEC 61238-1:1993 Compression and mechanical connectors for power cables with copper or aluminium conductors; part 1: test methods and requirements
  • IEC 61558-2-7:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys
  • IEC 61558-1:2005/AMD1:2009 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests; Amendment 1
  • IEC 61558-2-20:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors
  • IEC 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporationg control transformers

Professional Standard - Building Materials, Various pressure testing machines

  • JC/T 960-2005 Automatic compression machine for testing cement strength
  • JC/T 960-2022 Cement mortar strength automatic pressure testing machine

RU-GOST R, Various pressure testing machines

  • GOST R 55014-2012 Power transformers. Tests for mechanical strength of tanks
  • GOST 8.136-1974 State system for ensuring the uniformity of measurements. Hydraulic presses for testing building materials. Verification methods and means
  • GOST R ISO 17230-2015 Leather. Physical and mechanical tests. Method for determination of water penetration pressure
  • GOST R 57173-2016 Calculation and strength testing. Methods of mechanical testing of metals. Test for stress relaxation of metals and alloys at a compression. General requirements
  • GOST IEC 60811-508-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 508. Mechanical tests. Pressure test at high temperature for insulation and sheaths
  • GOST 34068-2017 Gas supply system. Natural gas production. Field pipelines. Mechanical safety. Pressure and leak tests
  • GOST 33164.3-2014 Mining machinery. Powered roof supports. Hydraulic control systems. Safety requirements and test methods
  • GOST IEC 61558-1-2012 Safety of power transformers, power supplies, reactors and similar products. Part 1. General requirements and tests
  • GOST R IEC 60335-2-34-2000 Safety of household and similar electrical appliances. Particular requirements for motor-compressors and test methods
  • GOST 27570.8-1988 Safety of household and similar electrical appliances. Particular requirements for motor-compressors and test methods

SE-SIS, Various pressure testing machines

  • SIS SS-ISO 6899:1992 Acceptance conditions of open front mechanical power presses — Testing of the accuracy
  • SIS SS-ISO 4020/2:1981 Road vehicles - Fuel filters for auto- motive compression ignition engines- Part 2: Test values and classification

CZ-CSN, Various pressure testing machines

  • CSN ISO 6899:1992 Acceptance conditions of open front mechanical power presses. Testing of the accuracy
  • CSN 37 0610-1960 Test specifications for testing of pressure mechanical connections of aluminium conductors
  • CSN 35 4055 Cast.9-1987 Electromechanical components for electronic equipment. Voltage stress tests
  • CSN 37 0612-1960 Test specifications for testing of pressure mechanical connections for extra heavy service conditions
  • CSN 34 7193-1969 Winding wires Insulated rectangular wires Breakdown test after mechanical stressing
  • CSN 34 7010 Cast.46-1976 Breakdown voltage test of fibre an.l tape covered winding wires after thermal .inJ mechanical stressing.

Indonesia Standards, Various pressure testing machines

  • SNI IEC 62006:2013 Hydraulic machines - Acceptance tests of small hydroelectric installations

AENOR, Various pressure testing machines

  • UNE-EN 62006:2011 Hydraulic machines - Acceptance tests of small hydroelectric installations
  • UNE 15328:1992 ACCEPTANCE CONDITIONS OF OPEN FRONT MECHANICAL POWER PRESSES. TESTING OF THE ACCURACY.
  • UNE-EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
  • UNE-EN 61558-1:2007/A1:2009 Safety of power transformers, power supplies, reactors and similar products -- Part 1: General requirements and tests

ES-AENOR, Various pressure testing machines

Military Standard of the People's Republic of China-General Armament Department, Various pressure testing machines

  • GJB 1798A-2020 Test method for pressure failure strength of aircraft glass
  • GJB 3849-1999 Requirements and methods for pulse testing of aircraft hydraulic actuators, valves, and pressure vessels
  • GJB 503.1-1995 Test method for thermal shock resistance and pressure fatigue resistance of aircraft laminated glass
  • GJB 9891-2020 Test method for inlet pressure distortion of aviation turbojet and turbofan engines

未注明发布机构, Various pressure testing machines

  • BS EN 60953-2:1996(1999) Rules for steam turbine thermal acceptance tests — Part 2 : Method B : Wide range of accuracy for various types and sizes of turbines
  • BS 1610-1:1992(1999) Materials testing machines and force verification equipment — Part 1 : Specification for the grading of the forces applied by materials testing machines whenused inthe compression mode
  • BS ISO OECD 789-10:2006 Agricultural tractors — Test procedures — Part 10 : Hydraulic power at tractor / implement interface
  • DIN EN ISO 7500-1 Beiblatt 1:1999 Testing of testing machines for static uniaxial loading Part 1: Tensile and compression testing machines Testing and calibration of the force measuring device General information on requirements and the testing and calibration of tensile, compression and
  • BS EN 911:1996(1999)*BS 2782-11 MTD 1123W:1996 Plastics piping systems — Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping — Test method for leaktightness under external hydrostatic pressure

AT-ON, Various pressure testing machines

  • ONORM ISO 2874:1987 Packaging; complete, filled transport packages; stacking fest using compression fester
  • ONORM M 7390-2/AC1-2000 Gas cylinder valves for test pressures up to max. 300 bar - Types, dimensions, connections, threads (Corrigendum)
  • ONORM M 7390 Teil.3-1985 Gas cylinder valves for test pressures above 300 bar up to 450 bar; type, dimensions, connections, threads
  • ONORM M 7390-2-1997 Gas cylinder valves for test pressures up to max. 300 bar - Types, dimensions, connections, threads (includes also corrigendum 1997)
  • ONORM M 7761-1984 Heat pumps with electrically driven compressors for airjwater; type testing for heat ratings up to 40 kW
  • ONORM EN 713-1994 Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
  • ONORM M 7762-1986 Heat pumps with electrically driven compressors; type testing of heat pump Systems for the heating of drinking and process water up to 2,5 kW rated electric power; marking of conformity

National Metrological Technical Specifications of the People's Republic of China, Various pressure testing machines

  • JJF 1296.3-2011 Program of Pattern Evaluation of Static Uniaxial Testing Machines―Part 3 :Hydraulic Universal Testing Machines

VN-TCVN, Various pressure testing machines

  • TCVN 7576-6-2010 Methods of test for full-flow lubricating oil filters for internal combustion engines.Part 6: Static burst pressure test

European Association of Aerospace Industries, Various pressure testing machines

  • AECMA PREN 2624-1990 Aerospace Series Pressure Impulse Testing of Hydraulic System Components Issue P 1

SAE - SAE International, Various pressure testing machines

  • SAE ARP4904-1994 Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components
  • SAE ARP4904A-2014 Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components
  • SAE J283-1983 Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-point Hitch
  • SAE J283-1972 Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch

Society of Automotive Engineers (SAE), Various pressure testing machines

  • SAE ARP4904-2008 Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components
  • SAE J283-1993 Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch
  • SAE J283-1999 Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-point Hitch
  • SAE J283-2009 Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch
  • SAE J283-2019 Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch

ES-UNE, Various pressure testing machines

  • UNE-EN IEC 60953-0:2022 Rules for steam turbine thermal acceptance tests - Part 0: Wide range of accuracy for various types and sizes of turbines (Endorsed by Asociación Española de Normalización in August of 2022.)
  • UNE-EN 60811-508:2012/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
  • UNE-EN 60953-2:1995 RULES FOR STEAM TURBINE THERMAL ACCEPTANCE TESTS.PART 2: METHOD B. WIDE RANGE OF ACCURACY FOR VARIOUS TYPES AND SIZES OF TURBINES. (Endorsed by AENOR in April of 1996.)
  • UNE-EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
  • UNE-EN IEC 61238-1-3:2020/A11:2020 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated co...
  • UNE-EN IEC 61238-1-3:2020 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated co...
  • UNE-EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)

American National Standards Institute （ANSI), Various pressure testing machines

  • ANSI/SPRI IA-1-2010 Standard Field Test Procedure for Determining the Mechanical Uplift Resistance of Insulation Adhesive over Various Substrates
  • ANSI/AMCA 240-2015 Laboratory Methods of Testing Positive Pressure Ventilators for Aerodynamic Performance Rating
  • ANSI/IEEE 433:2009 Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency

Lithuanian Standards Office , Various pressure testing machines

  • LST EN 60953-2-2001 Rules for steam turbine thermal acceptance tests. Part 2: Method B. Wide range of accuracy for various types and sizes of turbines (IEC 60953-2:1990)
  • LST EN 62006-2011 Hydraulic machines - Acceptance tests of small hydroelectric installations (IEC 62006:2010)
  • LST EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004)
  • LST EN ISO 7500-1:2004/AC:2009 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004/Cor 1:2008)
  • LST EN 60811-508-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths (IEC 60811-508:2012)
  • LST EN 713-2002 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • LST EN 911-2002 Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure

IN-BIS, Various pressure testing machines

American Society for Testing and Materials (ASTM), Various pressure testing machines

  • ASTM E3278-21 Standard Test Method for Bubble Point Pressure of Woven Wire Filter Cloth
  • ASTM D8275-19a Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
  • ASTM D8275-21 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
  • ASTM D8275-19 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
  • ASTM D8275-22 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
  • ASTM D945-06 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
  • ASTM D5859-96 Standard Test Method for Determining the Traction of Footwear on Painted Surfaces Using the Variable Incidence Tester
  • ASTM D945-06(2012) Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
  • ASTM D945-16 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
  • ASTM D5706-97(2002)e1 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D5706-97 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D7421-08 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D7217-05(2010)e1 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D5706-05(2011)e1 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D5706-11 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D7421-11 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D945-92(1997) Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
  • ASTM D945-92(2001)e1 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
  • ASTM D2272-09 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
  • ASTM D1657-12 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D6378-10 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
  • ASTM D7217-22 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D3003-01(2022) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
  • ASTM D2272-22 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
  • ASTM D2272-11 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
  • ASTM D2503-92(2002)e1 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2007) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D6894-03 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
  • ASTM D6894-13 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
  • ASTM D8047-19e1 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
  • ASTM D3003-94 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
  • ASTM D3003-01 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
  • ASTM D3003-01(2006) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
  • ASTM D1657-02(2007) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM E2853-12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Human-System Interaction (HSI): Search Tasks: Random Mazes with Complex Terrain
  • ASTM D3003-01(2012) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
  • ASTM F1819-19 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
  • ASTM D8047-16 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
  • ASTM F1819-07(2013) Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
  • ASTM D6894-11 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
  • ASTM D4970-05(2007)e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester)
  • ASTM D4970-07 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
  • ASTM D7594-16 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D7594-19 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D8047-23 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
  • ASTM F1819-03 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
  • ASTM F1819-04 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
  • ASTM F1819-98 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
  • ASTM F904-16 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials

国家市场监督管理总局、中国国家标准化管理委员会, Various pressure testing machines

  • GB/T 36230-2018 CNC Straight-side link-drive press—Performance requirements and test methods
  • GB/T 36693-2018 Earth-moving machinery—Hydraulic excavator—Reliability test procedures,failure classification and evaluation
  • GB/T 38989-2020 Uniaxial compressive elastic modulus test method of materials stabilazed with inorganic binder（middle segment method）

机械工业部, Various pressure testing machines

  • JB/T 7365-1994 Technical specifications of hydraulically loaded closed force flow chain wear testing machine

ZA-SANS, Various pressure testing machines

  • SANS 7500-1:2009 Metallic materials - Verification of static uniaxial testing machines Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
  • SANS 50712:1993 Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force
  • SANS 50713:1993 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • SANS 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) Part 1: Test methods and requirements

AT-OVE/ON, Various pressure testing machines

  • OVE EN IEC 60953-0:2021 Rules for steam turbine thermal acceptance tests - Part 0: Wide range of accuracy for various types and sizes of turbines (IEC 5/239/CDV) (english version)

CENELEC - European Committee for Electrotechnical Standardization, Various pressure testing machines

  • EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
  • EN 61558-2-2:1998 Safety of Power Transformers@ Power Supply Units and Similar Part 2.2: Particular Requirements for Control Transformers

Canadian Standards Association (CSA), Various pressure testing machines

  • CAN/CSA-M789.10-2007 Agricultural tractors — Test procedures — Part 10: Hydraulic power at tractor/implement interface (Second Edition)
  • CSA E61558-1-03-CAN/CSA-2003 S閏urit?des transformateurs, blocs d alimentation et analogues Partie 1: R鑗les g閚閞ales et essais Premiere Edition

GOSTR, Various pressure testing machines

  • GOST R ISO 3458-2020 Plastis piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under internal pressure
  • GOST R 59111-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under negative pressure
  • GOST R ISO 3503-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under internal pressure of assemblies subjected to bending
  • GOST R ISO 3501-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for resistance to pull-out under constant longitudinal force

GB-REG, Various pressure testing machines

  • REG NASA-LLIS-0927-2001 Lessons Learned - KAO (Kuiper Airborne Observatory) Gauge Calibration Problem During Aircraft Pressure Test

Professional Standard - Textile, Various pressure testing machines

  • FZ/T 90082.2-1995 Physical-mechanical test methods for laminated wood side panels and picking bars for shuttle looms Density
  • FZ/T 90082.3-1995 Physical-mechanical test methods for laminated wood side panels and picking bars for shuttle looms Moisture content
  • FZ/T 90082.1-1995 Physical-mechanical test methods for laminated wood side panels and picking bars for shuttle looms Specimen preparation and inspection
  • FZ/T 90082.4-1995 Physical-mechanical test methods for impact toughness of laminated wood side panels and picking bars for shuttle looms

Professional Standard - Energy, Various pressure testing machines

  • NB/SH/T 0920-2016 Determination of fretting resistance of lubricating greases under high hertz contact pressure by high-frequency linear vibration testing machine method

国家能源局, Various pressure testing machines

  • SH/T 0920-2016 Determination of the resistance of grease to fretting wear under high hertz contact pressure High frequency linear vibration testing machine method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Various pressure testing machines

  • GB/T 17454.3-2017 Safety of machinery—Pressure-sensitive protective devices—Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices

GM North America, Various pressure testing machines

  • GM GMN10047-2011 Inner Pressure Burst Test for Mechanical Tubing for Hydroforming (Issue 2; Do Not Use on New Programs; No Replacement)

National Aeronautics and Space Administration (NASA), Various pressure testing machines

  • NASA NACA-WR-L-701-1942 Test of NACA 66, 2-116, a = 0.6 airfoil section fitted with pressure balanced and slotted flaps for the wing of the XP-63 airplane
  • NASA NACA-RM-A8E21-1948 Tests of a triangular wing of aspect ratio 2 in the Ames 12-foot pressure wind tunnel. III - the effectiveness and hinge moments of a skewed wing-tip flap

Standard Association of Australia （SAA）, Various pressure testing machines

  • AS/NZS 4325.1/AMD 1:1997 Compression and mechanical connectors for power cables with copper or aluminium conductors Part 1: Test methods and requirements

  Electro-hydraulic servo pressure testing machine, Pressure testing machine multiple, Pressure testing machine, Electro-hydraulic servo pressure testing machine, Hydraulic pressure testing machine, Hydraulic pressure testing machine, Servo pressure testing machine, Servo pressure testing machine, Material Pressure Testing Machine, Building material pressure testing machine, Electro-hydraulic pressure testing machine, Pressure material testing machine, Tension and compression testing machine, Large pressure testing machine, Spring Pressure Testing Machine, Pressure material testing machine, Spring Pressure Testing Machine, Various pressure testing machines, Pressure testing machine, Standard Pressure Testing Machine.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved