ZH
RU
ES

How to measure the centrifuge

How to measure the centrifuge, Total:73 items.

In the international standard classification, How to measure the centrifuge involves: Shipbuilding and marine structures in general, Equipment for processing of minerals, Particle size analysis. Sieving, Paint ingredients, Vibrations, shock and vibration measurements, Electrical and electronic testing, Analytical chemistry, Air quality, Electromechanical components for electronic and telecommunications equipment, Equipment for the chemical industry.

AT-ON, How to measure the centrifuge

OENORM EN 17763-2021 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions

European Committee for Standardization (CEN), How to measure the centrifuge

prEN 17763-2021 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
EN 17763:2022 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method [Superseded: CEN EN 13526]
EN 60010-2-02:1994 Safety requirements for electrical equipment for measurement, control and laboratory use Part u320 Particular rqyirernents for laboratory centrifuges (includes amendment Al : 1996)

German Institute for Standardization, How to measure the centrifuge

DIN EN 17763:2022-12 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions; German version EN 17763:2022
DIN EN 17763:2022 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
DIN EN ISO 787-23:1995-10 General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979); German version EN ISO 787-23:1995
DIN EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006); German version EN 61010-2-020:2006

ES-UNE, How to measure the centrifuge

UNE-EN 17763:2023 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
UNE-EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (Endorsed by Asociación Española de Normalización in June of 2017.)

Professional Standard - Machinery, How to measure the centrifuge

JB/T 10411-2014 Ultrasonic inspection and quality estimation for stainless steel forging of centrifuge and separator
JB/T 10411-2004 Ultrasonic inspection and quality estimation for austenic steel forging of centrifuge and separator

SE-SIS, How to measure the centrifuge

SIS SMS 840-1946

British Standards Institution (BSI), How to measure the centrifuge

BS EN 17763:2022 Centrifuges. Marine fuel centrifuges. Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
21/30441619 DC BS EN 17763. Centrifuges. Marine fuel centrifuges. Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
BS EN ISO 787-23:1995 General methods of test for pigments and extenders. Determination of density (using a centrifuge to remove entrained air)
BS EN 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for laboratory centrifuges
BS EN 61010-2-020:2017 Tracked Changes. Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for laboratory centrifuges
BS IEC 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges
20/30387385 DC BS EN IEC 61010-2-020. Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges

Association Francaise de Normalisation, How to measure the centrifuge

NF T30-720-1*NF EN ISO 14680-1:2006 Paints and varnishes - Determination of pigment content - Part 1 : centrifuge method
NF EN ISO 787-23:1995 Méthodes générales d'essai des pigments et matières de charge - Partie 23 : détermination de la masse volumique (en utilisant une centrifugeuse pour chasser l'air entraîné).
FD CEN/TR 17078:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 61010-2-020:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 12485:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 10028-6:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 10028-2:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 10028-4:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 1993-1-5/A1:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF C42-721:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020 : particular requirements for laboratory centrifuges.
NF C42-020-2-020*NF EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020 : particular requirements for laboratory centrifuges
NF C42-721:1994 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020 : particular requirements for laboratory centrifuges.
NF C93-475-1:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 13 : MECHANICAL OPERATING TESTS. SECTION 1 : TEST 13A : ENGAGING AND SEPARATING FORCES. (EUROPEAN STANDARD EN 60 512-13-1).

中国石油化工总公司, How to measure the centrifuge

SH/T 0057-1991 Determination of inorganic particle content in marine residual fuel oil (centrifugal separation method)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to measure the centrifuge

ASHRAE TO-98-6-3-1998 Measuring the Performance of a Variable-Speed Drive Retrofit on a Fixed-Speed Centrifugal Chiller

American Society for Testing and Materials (ASTM), How to measure the centrifuge

ASTM D8413-22 Standard Guide for Measuring the Water Pore Volume of Catalytic Materials by Centrifuge
ASTM D8413-21 Standard Guide for Measuring the Water Pore Volume of Catalytic Materials by Centrifuge

Korean Agency for Technology and Standards (KATS), How to measure the centrifuge

KS M ISO 14680-1:2007 Paints and varnishes－Determination of pigment content－Part 1：Centrifuge methov
KS C IEC 61010-2-20:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-20:Particular requirements for laboratory centrifuges
KS C IEC 61010-2-20:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges
KS C IEC 61010-2-020:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges

ES-AENOR, How to measure the centrifuge

UNE 62-256-1991

Association of German Mechanical Engineers, How to measure the centrifuge

VDI 3839 Blatt 7-2012 Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with centrifugal pumps

VN-TCVN, How to measure the centrifuge

TCVN 7757-2007 Middle Distillate Fuels.Determination of water and sediment by centrifuge

US-CFR-file, How to measure the centrifuge

CFR 40-60.5417-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5417:What are the continuous control device monitoring requirements for my storage vessel or centrifugal compressor affected facility?

SG-SPRING SG, How to measure the centrifuge

SS 5 Pt.B14-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B14: Pigment Content (Centrifuge)

AASHTO - American Association of State Highway and Transportation Officials, How to measure the centrifuge

T270-1994 Standard Method of Test for Centrifuge Kerosene Equivalent and Approximate Bitumen Ratio (Nineteenth Edition; ASTM D5148-90)

ZA-SANS, How to measure the centrifuge

SANS 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-020: Particular requirements for laboratory centrifuges

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure the centrifuge

GB 4793.7-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for alboratory centrifuges
GB 4793.7-2008 Safety requirements for electrical equipment for measurement,control,and labortory use.Part 7:Particular requirements for laboratory centrifuges

TH-TISI, How to measure the centrifuge

TIS 2003-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-020: particular requirements for laboratory centrifuges

International Electrotechnical Commission (IEC), How to measure the centrifuge

IEC 61010-2-020:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-020:1992 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 2-020: particular requirements for laboratory centrifuges
IEC 61010-2-020:2016 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC TR 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992 - Particular requirements for laboratory centrifuges

European Committee for Electrotechnical Standardization（CENELEC）, How to measure the centrifuge

EN 61010-2-020:2006 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges
EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement@ control@ and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges

CENELEC - European Committee for Electrotechnical Standardization, How to measure the centrifuge

EN 61010-2-020:1994 Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges

Danish Standards Foundation, How to measure the centrifuge

DS/EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
DS/IEC/TR 61010-3-020:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992, Particular requirements for laboratory centrifuges

RU-GOST R, How to measure the centrifuge

GOST IEC 61010-2-020-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
GOST IEC 61010-2-020-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
GOST R IEC 61010-2-020-1999 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges

KR-KS, How to measure the centrifuge

KS C IEC 61010-2-020-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges

Lithuanian Standards Office , How to measure the centrifuge

LST EN ISO 787-23:2002 General method of tests for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979)
LST EN 61010-2-020-2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006)

AENOR, How to measure the centrifuge

UNE-EN ISO 787-23:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 23: DETERMINATION OF DENSITY (USING A CENTRIFUGE TO REMOVE ENTRAINED AIR ). (ISO 787-23:1979).
UNE-EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006)

Canadian Standards Association (CSA), How to measure the centrifuge

CAN/CSA-C22.2 NO.61010-2-020-2009 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (Second Edition)
CSA C22.2 No.61010-2-020-09-CAN/CSA-2009 Safety requirements for electrical equipment for measurement, control, and laboratory use ?Part 2-020: Particular requirements for laboratory centrifuges Second Edition
CSA C22.2 No.1010.2.020-94-1994 Regles De Securite Pour Appareils Electriques De Mesurage, De Regulation Et De Laboratoire - Partie 2-020: Prescriptions Particulieres Pour Centrifugeuses De Laboratoire Premiere Edition; Modification 1: 1997; Fiche No 1