ZH
RU
ES

Raw grade copper

Raw grade copper, Total:253 items.

In the international standard classification, Raw grade copper involves: General methods of tests and analysis for food products, Products of the chemical industry, Energy and heat transfer engineering in general, GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION, Non-ferrous metals, HEALTH CARE TECHNOLOGY, Beverages, Food products in general, Sterilization and disinfection, Mining and quarrying, Construction materials, Nuclear energy engineering, Materials for aerospace construction, Products of non-ferrous metals, Fruits. Vegetables, Graphic technology, Vocabularies, Fluid storage devices, Protection against dangerous goods, Protection of and in buildings, Metalliferous minerals, Crude petroleum, Petroleum products in general, Processes in the food industry, Cereals, pulses and derived products, Textile fibres, Water quality, Powder metallurgy, Technical product documentation, Air quality.

Association Francaise de Normalisation, Raw grade copper

NF EN 15022-3:2007 Cuivre et alliages de cuivre - Dosage de l'étain - Partie 3 : étain en faible teneur - Méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)
NF EN 14317-2:2007 Produits isolants thermiques pour le bâtiment - Produits d'isolation thermique à base de vermiculite exfoliée (EV) formés en place - Partie 2 : spécification des produits mis en place
NF T81-100:1982 Protection for the top sections of road tankers carrying dangerous materials. Design and positioning principales.
NF T94-307*NF EN 12671:2016 Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ
NF V05-127:1984 Fruits, légumes et produits dérivés - Détermination de la teneur en cuivre par spectrométrie d'absorption atomique avec flamme.
NF V01-006:2022 Hygiène des aliments - Place de l'HACCP et application de ses principes pour la maîtrise de la sécurité sanitaire des aliments et des aliments pour animaux
NF P75-454-1/IN1*NF EN 15101-1/IN1:2019 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1 : specification for the products before installation
NF P75-454-1*NF EN 15101-1+A1:2019 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1 : specification for the products before installation
NF EN 12671:2016 Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Dioxyde de chlore généré in situ
NF EN 14084:2003 Produits alimentaires - Dosage des éléments traces - Détermination du plomb, du cadmium, du zinc, du cuivre et du fer par spectrométrie d'absorption atomique (AAS) après digestion par micro-ondes
NF P75-431-1*NF EN 14064-1:2018 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1 : specification for the loose-fill products before installation
NF V01-006:2008 Hygiene of food products - Place of the HACCP system and application of its principles for controllling the safety of food and animal feeding stuffs.
NF V03-085*NF EN 14084:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion.
NF V03-083:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing.
NF P75-444-2*NF EN 14318-2:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2 : specification for the installed insulation products
NF P75-441-2*NF EN 14315-2:2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2 : specification for the installed insulation products
NF X43-902*NF EN 16414:2014 Ambient air - Biomonitoring with mosses - Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples
NF P75-445-2*NF EN 14319-2:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2 : specification for the installed insulation products
NF T73-290*NF EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two phase titration method

RU-GOST R, Raw grade copper

GOST 26931-1986 Raw materials and food-stuffs. Method for determination of copper
GOST R ISO 13408-5-2011 Aseptic processing of health care products. Part 5. Sterilization in place
GOST 33208-2014 Copper and complex ores, and products of their processing. Atomic absorption spectrometry method for weight fraction of measurement of copper, zinc, lead, bismuth, cadmium, antimony
GOST R 51301-1999 Food-stuffs and food raw materials. Anodic stripping voltammetric methods of toxic traces elements determination (cadmium, lead, copper and zinc)
GOST 33206-2014 Copper and complex ores, and products of their processing. Atomic emission spectrometry with inductively coupled plasma method for weight fraction measurement of copper, zinc, lead, bismuth, cadmium, arsenic, antimony
GOST R 51823-2001 Alcoholic products and raw material for it's production. Inversion-voltammetric method for determination of cadmium, lead, zinc, copper, arsenic, mercury, iron and total sulphur dioxide content

Group Standards of the People's Republic of China, Raw grade copper

T/SDAS 397-2022 Raw material tripeptide-1 copper for cosmetics
T/CNIA 0049.2-2020 Chemical analysis methods of nickel sulfate by-product of smelting - Part 2: Determination of copper content by flame atomic absorption spectrometry and iodometric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Raw grade copper

GB 21350-2008 The norm of energy consumption per unit product of copper and copper-alloy tube
GB 29443-2012 The norm of energy consumption per unit product of copper and copper-alloy rod and bar
GB 21350-2013 The norm of energy consumption per unit product of copper and copper-alloy tube
GB 29137-2012 The norm of energy consumption per unit products of copper and copper-alloy wire
GB 21350-2023 The norm of energy consumption per unit production of wrought copper and copper alloy
GB 29442-2012 The norm of energy consumption per unit products of copper and copper-alloy sheet,strip,foil
GB 21248-2007 The noum of energy consumption per unit ptoducts of copper metallurgical enterprise
GB 21248-2014 The norm of energy consumption per unit product of copper metallurgical enterprise
GB 32046-2015 The norm of energy consumption per unit products of copper drawing stock for electrical purpose
GB/T 29998-2013 Benefit calculation to determine the mining and processing of low-grade ore of copper mine
GB/T 14503-1993 General principle of nomenclature and classification of radioisotope products
GB/T 14503-2008 General principle of nomenclature and classification of radioisotope products
GB/T 14609-2008 Inspection of grain and oils.Determination of copper,iron,manganese,zinc,calcium,magnesium in cereals and dericed products by atomic absorption and flame spectrophotometry

工业和信息化部, Raw grade copper

YS/T 1402-2020 Energy consumption limit per unit product for copper and copper alloy profiles
YS/T 693-2022 Copper concentrate unit product energy consumption limit
YB/T 4895-2021 Energy consumption limit per unit product of refractory raw materials
YS/T 1332.1-2019 Methods for chemical analysis of crude copper and cobalt raw materials Part 1: Determination of cobalt content by potentiometric titration

Shanghai Provincial Standard of the People's Republic of China, Raw grade copper

DB31/ 720-2013 Copper and copper alloy rods and wire rods energy consumption quota per unit product
DB31/ 720-2020 Copper and copper alloy rods and wire rods energy consumption quota per unit product
DB31/ 793-2014 Norm of energy consumption per unit products of copper and copper-alloy sheet,strip,foil
DB31/ 573-2011 Copper Refining Unit Product Energy Consumption Quota
DB31/ 2015-2013 Guiding principles for food safety management of catering service units

CZ-CSN, Raw grade copper

CSN 42 0623 Cast.2-1986 Chemical analysis of non-ferrous metals and alloys. Low-alloy copper. Determination of silver by the atomic absorption method and potentiometric titration method
CSN 42 0623 Cast.5-1986 Chemical analysis of non-ferrous metals and alloys. Low-alloy copper. Determination of tellurium by the atomic absorption method and potentiometric titration method
CSN 42 0623 Cast.3-1986 Low-alloy copper. Determination of chromium by the atomic absorption method and potentiometric titration method
CSN 42 0611 Cast.7-1986 Chemical analysis of non-ferrous metals. Copper-base bearing metals. Determination of silver by the potentiometric method and atomic absorption method
CSN 42 0670 Cast.4-1981 Aluminium alloys. Determination of copper by the atomic-absorption method, electrogravimetric and photometric methods
CSN 56 0076-1987 Determination of copper, lead, zinc and cadmium in foodstuffs by atomic absorption method
CSN 80 0600-1967 Determination of copper number of cellulose in textile raw materials, semi- products and products
CSN 80 0600 Za-1986

Shandong Provincial Standard of the People's Republic of China, Raw grade copper

DB37/ 829-2015 Energy consumption limit per unit product of original liquor
DB37/ 2440-2013 Comprehensive energy consumption quota per unit product of xanthan gum
DB37/ 748-2015 Copper smelting enterprises comprehensive energy consumption limit per unit product

Beijing Provincial Standard of the People's Republic of China, Raw grade copper

DB11/T 1153-2015 Raw coal energy consumption limit per unit product

AENOR, Raw grade copper

UNE 84101:2006 Cosmetic raw materials. Toothpastes. pH determination. Potentiometric method.
UNE 92184:2017 Minimum advisable characteristics for different applications. Thermal insulation products for buildings. In-situ formed sprayed rigid polyurethane foam (PU) products and polyisocianurate projected in situ (PIR)
UNE-EN 14064-2:2014 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
UNE 84623:1998 COSMETIC RAW MATERIALS. DIMETHYLDIMETHYLOL HYDANTOINE. DETERMINATION OF TOTAL FORMALDELYDE. POTENCIOMETRIC METHOD.
UNE 84112:1995 COSMETIC RAW MATERIALS. ASSAY OF 2,4,4'-TRICHLORO-2'-HYDROXY-DIPHENYL-ETHER (TRICLOSAN). POTENTIOMETRIC TITRATION.
UNE 84621:1998 COSMETIC RAW MATERIALS. DIMETHYLDIMETHYLOL HIDANTOIN. DETERMINATION OF FREE FORMALDEHYDE. POTENCIOMETRIC METHOD.
UNE-EN 14316-2:2009 Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
UNE-EN 14064-1:2017 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
UNE-EN 14317-2:2009 Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products. Part 2: Specification for the installed products.
UNE-EN 14063-1:2006 Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
UNE-EN 14082:2003 Foodstuffs. Determination of trace elements. Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing
UNE-EN 14084:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion
UNE-EN 14317-1:2005 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
UNE-EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
UNE-EN 14316-1:2005 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
UNE-EN 14318-2:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products
UNE 55803:1986 SURFACE ACTIVE AGENTS. CHEMICAL PRODUCTS TO BE USED AS RAW MATERIALS IN DETERGENT FORMULATIONS. GENERAL METHODS FOR DETERMINATION OF CHLORIDE IONS. POTENTIOMETRIC METHOD
UNE-EN 14319-2:2014 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products

Jilin Provincial Standard of the People's Republic of China, Raw grade copper

DB22/T 2446-2016 Crude Oil Exploitation Unit Product Energy Consumption Quota

Anhui Provincial Standard of the People's Republic of China, Raw grade copper

DB34/T 3087-2018 Comprehensive energy consumption quota per unit product of copper-clad laminates

Fujian Provincial Standard of the People's Republic of China, Raw grade copper

DB35/ 1133-2011 Energy consumption limit per unit product of liquid-process liquor
DB35/ 1131-2011 Energy consumption limit per unit product of solid-state liquor raw liquor
DB35/ 1132-2011 Energy consumption limit per unit product of semi-solid liquor raw liquor

Jiangxi Provincial Standard of the People's Republic of China, Raw grade copper

DB36/ 772-2013 Energy Consumption Quotas per Unit Product of Secondary Copper Smelting Enterprises
DB36/T 1274-2020 Technical specification for the application of copper tailings siliceous raw materials for autoclaved aerated concrete products

Liaoning Provincial Standard of the People's Republic of China, Raw grade copper

DB21/T 1642-2008 Magnesium refractory raw materials and products energy consumption limit per unit product

German Institute for Standardization, Raw grade copper

DIN EN 14063-1:2004-11 Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004 / Note: To be replaced by DIN EN 14063...
DIN EN ISO 13408-4:2011-09 Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005); German version EN ISO 13408-4:2011
DIN EN 16809-2:2017-04 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation; German version ...
DIN EN 16809-1:2020-02 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation; German version...
DIN EN 14064-2:2010-06 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products; German version EN 14064-2:2010
DIN EN 14063-2:2013-10 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products; German version EN 14063-2:2013
DIN EN 12671:2016 Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ
DIN EN 15101-2:2013-12 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 2: Specification for the installed products; German version EN 15101-2:2013
DIN EN 15101-1:2019-07 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation; German version EN 15101-1:2013+A1:2019
DIN EN 12671:2016-09 Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ; German version EN 12671:2016 / Note: This standard is part of the DVGW body of rules.
DIN EN 14317-2:2007-04 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products; German version EN 14317-2:2007
DIN EN 14320-1:2013-04 Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation; Germ...
DIN EN 14320-2:2013-04 Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products; German version EN ...
DIN EN 14064-1:2019-04 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation; German version EN 14064-1:2018
DIN EN 14316-2:2007-04 Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products; German version EN 14316-2:2007
DIN EN 14084:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion; German version EN 14084:2003
DIN EN 14064-1:2016 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before Installation; German and English version prEN 14064-1:2016
DIN EN 14064-1:2019 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
DIN EN 14063-1:2016 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016
DIN EN 14319-1:2013-04 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation...
DIN EN 14319-2:2013-04 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products; German version E...
DIN EN 15600-1:2010-12 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation; German version...
DIN EN 15101-1:2013 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation; German version EN 15101-1:2013
DIN EN 15101-1:2019 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation (includes Amendment A1:2019)
DIN EN 15101-2:2013 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 2: Specification for the installed products; German version EN 15101-2:2013
DIN EN 14082:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing; German version EN 14082:2003
DIN EN 15600-2:2010-12 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products; German version EN 15600-2:2010
DIN EN 14084:2003-07 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion; German version EN 14084:2003
DIN EN 14317-1:2004-11 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14317-1:2004
DIN EN 14316-1:2004-11 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14316-1:2004
DIN EN 15599-2:2010-12 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products; German version EN 15599-2:2010
DIN EN 14315-2:2013-04 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products; German version EN 14315-2:2013
DIN EN 14318-2:2013-04 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products; German version EN 14318-2:2013
DIN EN 13615:2002-04 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry; German version EN 13615:2001
DIN EN 16414:2014-08 Ambient air - Biomonitoring with mosses - Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples; German version EN 16414:2014
DIN 6779-2:2004 Structuring principles for technical products and technical product documentation - Part 2: Letter codes - Main classes and subclasses of objects according to their purpose or task
DIN EN 14315-2:2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products; German version EN 14315-2:2013
DIN EN 14318-2:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products; German version EN 14318-2:2013
DIN EN 15599-1:2010-12 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 15...
DIN EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005
DIN EN 14668 Berichtigung 1:2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005, Corrigenda to DIN EN 14668:2005-09; German version EN 14

Society of Automotive Engineers (SAE), Raw grade copper

SAE AMS3678/6A-2010 Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions

Hunan Provincial Standard of the People's Republic of China, Raw grade copper

DB43/T 1018-2015 Comprehensive energy consumption per unit product of liquor original liquor and its calculation method

Jiangsu Provincial Standard of the People's Republic of China, Raw grade copper

DB32/ 2768-2015 Energy consumption quota and calculation method per unit product of liquor original liquor

European Committee for Standardization (CEN), Raw grade copper

EN 12671:2016 Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ
EN 14315-2:2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products
EN 14318-2:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products
EN 14315-1:2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation
EN 14318-1:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
EN 16783:2017 Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
EN 15101-1:2013 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
EN 14317-2:2007 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products
EN 14316-2:2007 Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
EN 15600-2:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products
EN 14082:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing
EN 14319-2:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products
EN 14320-2:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products
EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation
EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation
EN 15599-2:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
EN 14084:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion
EN 14083:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion

FI-SFS, Raw grade copper

SFS 2902-1978

Professional Standard - Light Industry, Raw grade copper

QB/T 5044-2017 Norm of energy consumption per unit product of coated art paper
QB/T 4969-2016 Surface active agents.Determination of cationic surfactant in raw materials and formulated products.Potentiometric titration method
QB/T 4970-2016 Surface active agents.Determination of anionic surfactant in raw materials and formulated products.Potentiometric titration method

Yunnan Provincial Standard of the People's Republic of China, Raw grade copper

DB53/T 707-2015 Copper smelting enterprises energy consumption limit and calculation method per unit product

Professional Standard - Agriculture, Raw grade copper

NY/T 1278-2007 Determination of Soluble Sugar in Vegetables and Products Shafrer-Somogyi
水产品质量安全检验手册 6.6.1.0-2005 Chapter 6 Examination of Elements in Aquatic Products Section 6 Determination of Copper in Aquatic Products (GBT 5009.13-2003) 1. Atomic Absorption Spectrometry
812兽药质量标准2017年版 Biological Products Volume 1 Veterinary Drug Quality Standard Chicken Chlamydia Disease Genetic Engineering Subunit Vaccine
1041兽药质量标准2017年版 Biological Products Volume II Veterinary Drug Quality Standard Instructions for Chicken Chlamydia Genetic Engineering Subunit Vaccine

Professional Standard - Press and Publication, Raw grade copper

CY/T 131-2015 Green printing.Products sampling methods and the principle of determining test parts

British Standards Institution (BSI), Raw grade copper

BS EN 15101-1:2013 Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) products. Specification for the products before installation
BS EN 15101-1:2013+A1:2019 Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) products - Specification for the products before installation
BS EN 14317-2:2007(2008) Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Specification for the installed products
BS EN 14064-1:2018 Tracked Changes. Thermal insulation products for buildings. In-situ formed loose-fill mineral wool (MW) products. Specification for the loose-fill products before installation
BS 2000-356:1999 Methods of test for petroleum and its products. Crude petroleum. Determination of water. Potentiometric Karl Fischer titration method
BS EN 12671:2016 Tracked Changes. Chemicals used for treatment of water intended for human consumption. Chlorine dioxide generated in situ
BS EN 14082:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after ash drying
BS EN 14084:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion
BS EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
BS EN 16414:2014 Ambient air. Biomonitoring with mosses. Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples
BS EN 14668:2005(2006) Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method

Xinjiang Provincial Standard of the People's Republic of China, Raw grade copper

DB65/ 2961.2-2009 Calculation method and stipulation of comprehensive enery consumption norm for per unit product.part2;per unit copper slag production of electrolytic copper

ES-UNE, Raw grade copper

UNE 62424:2020 Compartmentalization «in situ» of buried metal tanks storing liquid petroleum products
UNE-EN 14063-2:2015 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products
UNE-EN 15101-2:2016 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 2: Specification for the installed products
UNE-EN 15101-1:2015+A1:2019 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
UNE-EN 12671:2016 Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ
UNE-EN 14063-1:2006/AC:2008 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation
UNE-EN 14064-1:2019 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
UNE-EN 13615:2001/AC:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry (Endorsed by AENOR in February of 2003.)
UNE-EN 15600-1:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation (Endorsed by AE...
UNE-EN 15600-2:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products (Endorsed by AENOR in June of 2011.)
UNE-EN 15599-2:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products (Endorsed by AENOR in June of 2011.)
UNE-EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation (Endorsed by AENOR in...

ES-AENOR, Raw grade copper

International Organization for Standardization (ISO), Raw grade copper

ISO 7952:1994 Fruits, vegetables and derived products - Determination of copper content - Method using flame atomic absorption spectrometry
ISO 20921:2019 Textiles — Determination of stable nitrogen isotope ratio in cotton fibres

Tianjin Provincial Standard of the People's Republic of China, Raw grade copper

DB12/ 046.23-2011 Calculation method and limit of comprehensive energy consumption per unit output of products Part 23: Energy factor per unit of crude oil processing
DB12/ 046.101-2011 Calculation method and limit of comprehensive energy consumption per unit output of products Part 101: Low-oxygen copper rods
DB12/ 046.19-2011 Calculation method and quota of comprehensive energy consumption per unit output of products Part 19: Electrolytic copper refining
DB12/ 046.18-2011 Calculation method and limit of comprehensive energy consumption per unit output of products Part 18: Anode copper refining
DB12/ 046.22-2011 Calculation method and quota of comprehensive energy consumption per unit output of product Part 22: Crude oil processing

Danish Standards Foundation, Raw grade copper

DS/EN 12671+NA:2009 Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ
DS/EN 14064-2:2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
DS/EN 15101-2:2013 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 2: Specification for the installed products
DS/EN 15101-1:2013 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
DS/EN 14063-2:2013 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products
DS/EN 14063-1/AC:2007 Thermal insulation products - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation
DS/EN 14317-2:2007 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products
DS/EN 14316-2:2007 Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
DS/EN 14064-1:2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
DS/EN 14063-1:2005 Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
DS/EN 14082:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing
DS/EN 14084:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion
DS/EN 15600-2:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products
DS/EN 14317-1:2005 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
DS/EN 14668/AC:2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
DS/EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
DS/EN 15599-2:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
DS/EN 14316-1:2005 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
DS/EN 14318-2:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products
DS/EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
DS/EN 15600-1:2011 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
DS/EN 14319-2:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products

Lithuanian Standards Office , Raw grade copper

LST EN 12671-2009 Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ
LST EN 14064-2-2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
LST EN 14063-1-2004/AC-2007 Thermal insulation products - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation
LST EN 14317-2-2007 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products
LST EN 14316-2-2007 Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
LST EN 14064-1-2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
LST EN 14063-1-2004 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation
LST EN 14082-2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing
LST EN 14084-2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion
LST EN 15600-2-2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products
LST EN 14317-1-2004 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
LST EN 14668-2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
LST EN 14668-2005/AC-2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
LST EN 15599-2-2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
LST EN 14316-1-2004 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
LST EN 15599-1-2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
LST EN 15600-1-2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation

PL-PKN, Raw grade copper

PN A79533-1991 Products of spirit industry. Determination of zinc, cadmium, cooper lead, ferrum content by atomic absorption spectrometry
PN-EN 15101-1+A1-2019-06 P Thermal insulation products for buildings -- In-situ formed loose fill cellulose (LFCI) products -- Part 1: Specification for the products before installation

CEN - European Committee for Standardization, Raw grade copper

PREN 15100-2-2004 Thermal insulating products for buildings - In-situ formed ureaformaldehyde foam (UF) products - Part 2: Specification for the installed insulation products
EN 15101-1:2013/A1:2019 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation (Incorporates Amendment A1:2019)

VN-TCVN, Raw grade copper

TCVN 6541-1999 Fruit, vegetables and derived products.Determination of copper content.Method using flame atomic absorption spectrometry
TCVN 8126-2009 Foods.Determination of lead, cadmium, zinc, copper, and iron.Atomic absorption spectrophotometry after microwave digestion

Professional Standard - Commodity Inspection, Raw grade copper

SN/T 2497.13-2010 Test method of import and export dangerous chemicals-Part 13: Florescence in-situ hybridization
SN/T 1796-2006 Determination of arsenic,chromium,copper in wood and wood-based products for import and export.Inductively coupled plasma atomic emission spectrometry
SN/T 2308-2009 Determination of copper,chromium,arsenic in preservative solutions and treated wood and wood-based products.Atomic absorption spectrometric method
SN/T 2945-2011 Determination of lead,cadmium,chromium,copper,manganese and zinc in rubber and rubber products.Inductively coupled plasma atomic emission spectrometric method
SN/T 2049-2008 Determination of copper,nickel,lead,manganese,cadmium,titanium in food grade of phosphoric acid for import and export.Inductively coupled plasma atomic emission spectrometric method
SN/T 2686-2010 Determination of beryllium,chromium,nickel,copper,antimony,cobalt,barium,cadmium,zinc and bismuth in used mechanical and electrical products.Inductively coupled plasma-atomic emission spectrometry
SN/T 4026-2014 Determination of aluminium、iron、calcium、magnesium、sodium、potassium、titanium、lead、cadmium、silicon、zinc、copper in the glass.Inductively coupled plasma atomic emission spectrometry

Japanese Industrial Standards Committee (JISC), Raw grade copper

JIS K 2275-2:2015 Crude petroleum and petroleum products -- Determination of water -- Part 2: Potentiometric Karl Fischer titration method

BELST, Raw grade copper

STB 1313-2002 Raw material and food productsMethods of definition contents of toxic elements zinc, cadmium, lead and copper by stripping voltammetric analysis on analyzers type TA

海关总署, Raw grade copper

SN/T 5228.9-2019 MALDI-TOF MS method for rapid screening of pathogenic microorganisms in exported foods Part 9: Pseudomonas aeruginosa

GOSTR, Raw grade copper

GOST 33206-2020 Copper and complex ores, and products of their processing. Atomic emission spectrometry with inductively coupled plasma method of measurement of copper, zinc, lead, bismuth, cadmium, arsenic, antimony weight fraction
GOST R 58663-2019 Agricultural products, raw materials and food with improved environmental characteristics. Mineral fertilizers. Method of measurement of lead, cadmium, arsenic, nickel, mercury, chromium (VI), copper, zinc and biuret

Professional Standard - Machinery, Raw grade copper

JB/T 8063.5-1996 Powder metallurgy materials and products chemical analysis method Determination of tin in copper-based materials and products (sodium hypophosphite reduction-potassium iodate titration method)
JB/T 8063.5-2011 Methods for chemical analysis of powder metallurgy materials and products:Part 5:The secondary sodium phosphate reduction – potassium iodate titrimetric method for the determination of tin in copper-based materials and products

Indonesia Standards, Raw grade copper

SNI 7854-2013 Metode pengujian kadar logam tembaga (Cu), seng (Zn), besi (Fe) dalam daging, telur, susu, dan olahannya dengan menggunakan Spektrofotometer Serapan Atom (SSA)

AT-ON, Raw grade copper

OENORM B 6001-2021 In-situ formed insulation materials for thermal and/or acoustic insulation in building construction - Product types, performance requirements and specifications for use