ZH
RU
ES

Sensing and Machine Control

Sensing and Machine Control, Total:192 items.

In the international standard classification, Sensing and Machine Control involves: Agricultural machines, implements and equipment, Automatic controls for household use, Switchgear and controlgear, Industrial automation systems, Services, Medical sciences and health care facilities in general, Road vehicle systems, Vibrations, shock and vibration measurements, Textile machinery, Graphical symbols, Earth-moving machinery, Occupational safety. Industrial hygiene, Ergonomics, Vocabularies, Information technology (IT) in general, Shipbuilding and marine structures in general, Networking, Applications of information technology, Interface and interconnection equipment, Electrical accessories, Audio, video and audiovisual engineering, Safety of machinery, Domestic electrical appliances in general, Telecommunication systems, Nuclear energy engineering, Electrical engineering in general, Measurement of fluid flow, Telecontrol. Telemetering, Farming and forestry.

Group Standards of the People's Republic of China, Sensing and Machine Control

T/NJ 1258-2020 Grain harvesting machinery—Intelligent perceiving and controlling terminal
T/CAGR 004-2022 Infection prevention and control management norms in medical and elderly care institutions
T/CHATA 018-2022 Guidelines for the Prevention and Control of Tuberculosis Infection in Primary Medical and Health Institutions
T/CHATA 023-2022 Specifications for prevention and control of tuberculosis infection in designated tuberculosis medical institutions
T/CVIA 63-2018 Technical specifications for control and content transmission between smartphones and smart TVs
T/SIAA 001-2017 Safety and electromagnetic compatibility—Requirements for connected controls, sensors and similar devices for household and similar purposes
T/SEPA 5-2022 MEMS fabrication technology of EFPI fiber optic ultrasonic sensor probe for partial discharge detection Part 2: measurement and regulation of residual stress

British Standards Institution (BSI), Sensing and Machine Control

BS EN 60730-2-6:2016+A1:2020 Automatic electrical controls - Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
BS EN 60730-2-6:2016 Tracked Changes. Automatic electrical controls. Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
18/30377627 DC BS EN IEC 60730-2-6 AMD1. Automatic electrical controls. Part 2-6. Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
BS ISO 13990-1:2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Vocabulary
BS ISO 13990-2:2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Connecting dimensions for yarn feeders and yarn control devices
BS EN 60730-2-18:1999 Automatic electrical controls for household and similar use - Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
BS ISO 11783-8:2006 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Power train messages
BS ISO 13990-3:2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Dimensions for connecting and interconnection cables
BS EN 954-1:1997 Safety of machinery - Safety related parts of control systems - General principles for design
BS ISO 11783-10:2015 Tracked Changes. Tractors and machinery for agriculture and forestry. Serial control and communications data network. Task controller and management information system data interchange
BS EN 60730-2-6:2008 Automatic electrical controls for household and similar use - Part 2-6:Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
PD IEC TS 63074:2023 Tracked Changes. Safety of machinery. Security aspects related to functional safety of safety-related control systems
BS EN 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
BS EN 894-1:1997 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - General principles for human interactions with displays and control actuators
BS EN ISO 19014-4:2020 Earth-moving machinery. Functional safety - Design and evaluation of software and data transmission for safety-related parts of the control system
FD E09-027-1999 Safety of machinery - Safety-related parts of control systems - Part 100 : guide on the use and application of EN 954-1:1996.
BS EN 62061:2005+A1:2013 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems

German Institute for Standardization, Sensing and Machine Control

DIN EN 50295:1999 Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor Interface (AS-i); German version EN 50295:1999
DIN 43767:1986-03 Measurement and control; electrical temperature sensors; welded-stem thermometers / Note: To be replaced by DIN 43735-3 (2005-04).
DIN 43764:1986-03 Measurement and control; electrical temperature sensors; straight thermometers with interchangeable sensor units / Note: To be replaced by DIN 43735-3 (2005-04).
DIN 43771:1989-12 Measurement and control; electrical temperature sensors; fast response thermometers / Note: To be replaced by DIN 43735-3 (2005-04).
DIN 43769:1986-03 Measurement and control; electrical temperature sensors; thermometers not fitted with protecting tubes / Note: To be replaced by DIN 43735-3 (2005-04).
DIN 43719:1990-04 Measurement and control; mechanical grid system for the installation of measuring and control instruments
DIN 43766:1986-03 Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1 mounting thread / Note: To be replaced by DIN 43735-3 (2005-04).
DIN 43765:1986-03 Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1/2 mounting thread / Note: To be replaced by DIN 43735-3 (2005-04).
DIN ISO 8935:1991-10 Agricultural machinery and tractors; mounting, aperture for external equipment controls; identical with ISO 8935:1990
DIN EN 894-3:2009 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators; German version EN 894-3:2000+A1:2008
DIN ISO 13990-2:2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 2: Connecting dimensions for yarn feeders and yarn control devices (ISO 13990-2:2006); Text in German, English and French
DIN ISO 13990-1:2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 1: Vocabulary (ISO 13990-1:2006); Text in German, English and French
DIN EN 894-2:2009 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays(includes Amendment A1:2008); English version of DIN EN 894-2:2009-02
DIN IEC/TR 63074:2021 Safety of machinery - Security aspects related to functional safety of safety-related control systems (IEC TR 63074:2019)
DIN ISO 8862:1990-03 Air-conditioning and ventilation of machinery control-rooms on board ships; design conditions and basis of calculations; identical with ISO 8862:1987 / Note: Applies in conjunction with DIN ISO 7547 (1990-03).
DIN EN 894-1:2009 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators; German version EN 894-1:1997+A1:2008
DIN 19242-13:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: data transmission with error free transmission circuit
DIN ISO 13990-3:2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 3: Dimensions for connecting and interconnection cables (ISO 13990-3:2006); Text in German, English and French
DIN 43807:1983-10 Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor

Indonesia Standards, Sensing and Machine Control

SNI 05-3105-1992 Numerical control of machines - Terminology and definitions for control systems

Beijing Provincial Standard of the People's Republic of China, Sensing and Machine Control

DB11/T 149-2023

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sensing and Machine Control

GB/T 11349.1-1989 Experimental determination of mechanical mobility--Basic definitions and transducers
GB/T 11349.1-2018 Mechanical vibration and shock.Experimental determination of mechanical mobility.Part 1:Basic terms and definitions, and transducer specifications
GB/T 11349.1-2006 Vibration and shock.Experimental determination of mechanical mobility.Part 1: Basic definitions and transducers
GB/T 19384.1-2012 Textile machinery and accessories.Yarn feeders and yarn control for knitting machines.Part 1:Vocabulary
GB/T 19384.2-2012 Textile machinery and accessories.Yarn feeders and yarn control for knitting machines.Part 2:Connecting dimensions for yarn feeders and yarn control devices
GB 14536.7-2010 Automatic electrical controls for household and similar use.Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
GB/T 14536.20-2008 Automatic electrical controls for household and similar use - Particular requirements for automatic electric water and air flow sensing controls, including mechanical requirements
GB 14536.20-2008 Automatic electrical controls for household and similar use.Particular requirements for automatic electric water and air flow sensing controls,including mechanical requirements
GB/T 14536.7-2010 Automatic electrical controls for household and similar use.Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
GB 14536.7-1996 Automatic electrical controls for household and similar use.Particular requirements automatic electrical pressure sensing controls including mechanical requirements
GB/T 19384.3-2012 Textile machinery and accessories.Yarn feeders and yarn control for knitting machines.Part 3:Dimensions for connecting and interconnection cables
GB/T 18473-2016 Electrical equipment of industrial machines.Serial data link for real-time communication between controls and drives
GB/T 18473-2001 Electrical equipment of industrial machines--Serial data link for real-time communication between controls and drives

Professional Standard - Hygiene , Sensing and Machine Control

WS/T 511-2016 Regulation for prevention and control of healthcare associated infection of airborne transmission disease in healthcare facilities

Association Francaise de Normalisation, Sensing and Machine Control

NF C47-736*NF EN 60730-2-6:2016 Automatic electrical controls - Part 2-6 : particular requirements for automatic electrical pressure sensing controls including mechanical requirements
NF C47-736/A1*NF EN 60730-2-6/A1:2020 Automatic electrical controls - Part 2-6 : particular requirements for automatic electrical pressure sensing controls including mechanical requirements
NF U14-407*NF ISO 11471:1997 Agricultural tractors and machinery. Coding of remote hydraulic power services and controle.
NF X35-101-3/IN1*NF EN 894-3/IN1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3 : control actuators
NF C47-736:1995 Automatic electrical controls for household and similar use. Part 2 : particular requirements for automatic electrical pressure sensing controls including memchanical requirements.
NF C46-303:1986 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL. METHODS OF EVALUATING THE PERFORMANCE OF TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS.
NF U05-100-8*NF ISO 11783-8:2006 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 8 : power train messages
NF X35-101-4*NF EN 894-4:2010 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4 : location and arrangement of displays and control actuators
NF ISO 11783-8:2006 Tracteurs et matériels agricoles et forestiers - Réseaux de commande et de communication de données en série - Partie 8 : messages de gestion de la transmission (boîtes de vitesses)
NF X35-101-2/IN1*NF EN 894-2/IN1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2 : displays
NF X35-101-2*NF EN 894-2+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2 : displays
NF X35-101-1/IN1*NF EN 894-1/IN1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1 : general principles for human interactions with displays and control actuators
NF X35-101-1*NF EN 894-1+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1 : general principles for human interactions with displays and control actuators

Korean Agency for Technology and Standards (KATS), Sensing and Machine Control

KS C IEC 60730-2-6:2020 Automatic electrical controls — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
KS B ISO 7626-1:2014 Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications
KS B ISO 13990:2005 Textile machinery and accessories-Yarn feeders for knitting machines-Vocabulary
KS B ISO 11471:2004 Agricultural tractors and machinery－Coding of remote hydraulic power services and controls
KS V 0424-2001 Internal wirings and pipings of engine control console
KS C IEC 60730-2-18-A:2014 Automatic electrical controls for household and similar use — Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
KS C IEC 60730-2-18-A-2014(2019) Automatic electrical controls for household and similar use — Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
KS C IEC 62765-1:2017 Nuclear powers plants — Instrumentation and control important to safety — Management of ageing of sensors and transmitters — Part 1: Pressure transmitters
KS B ISO 15998:2012 Earth-moving machinery-Machine-control systems(MCS) using electronic components-Performance criteria and tests for functional safety
KS B ISO 15998:2014 Earth-moving machinery — Machine control systems(MCS) using electronic components — Performance criteria and tests for functional safety

KR-KS, Sensing and Machine Control

KS C IEC 60730-2-6-2020 Automatic electrical controls — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
KS C IEC TR 63074-2023 Safety of machinery — Security aspects related to functional safety of safety-related control systems

ES-UNE, Sensing and Machine Control

UNE-EN 60730-2-6:2016/A1:2021 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
UNE-EN 60730-2-6:2016 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Shanxi Provincial Standard of the People's Republic of China, Sensing and Machine Control

DB14/T 1528-2017 Nosocomial Infection Prevention and Control Requirements in Elderly Care Institutions

Guangdong Provincial Standard of the People's Republic of China, Sensing and Machine Control

DB44/T 2309-2021 Infection Prevention and Control Management Standards for Elderly Care Institutions

Henan Provincial Standard of the People's Republic of China, Sensing and Machine Control

DB41/T 2437-2023 Specifications for Nosocomial Infection Prevention and Control in Nursing Homes

SAE - SAE International, Sensing and Machine Control

SAE J1939-2-2019 Agricultural and Forestry Off-Road Machinery Control and Communication Network
SAE EIA-484A-2015 Electrical and Mechanical Interface Characteristics and Line Control Protocol Using Communication Control Characters for Serial Data Link Between a Direct Numerical Control System and Numerical Control Equipment Employing Asynchronous Full Duplex Transmis

Society of Automotive Engineers (SAE), Sensing and Machine Control

SAE J1939-02-2006 Agricultural and Forestry Off-Road Machinery Control and Communication Network
SAE J1939-2-2013 Agricultural and Forestry Off-Road Machinery Control and Communication Network
SAE J1939/2-2006 Agricultural and Forestry Off-Road Machinery Control and Communication Network
SAE J1939/2-2019 Agricultural and Forestry Off-Road Machinery Control and Communication Network
SAE J1939/2-2013 Agricultural and Forestry Off-Road Machinery Control and Communication Network
SAE J/ISO 6682-2003 Earth-moving machinery Zones of comfort and reach for controls Identical to ISO 6682:1986; Superseding SAE J898

International Electrotechnical Commission (IEC), Sensing and Machine Control

IEC 60730-2-6:2015+AMD1:2019 CSV Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:2015/AMD1:2019 Amendment 1 - Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:2015 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 61491:2002 Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives
IEC TS 63074:2023 Safety of machinery - Security aspects related to functional safety of safety-related control systems
IEC TR 63074:2019 Safety of machinery - Security aspects related to functional safety of safety-related control systems
IEC 61491:1995 Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives
IEC 60730-2-6:1991 Automatic electrical controls for household and similar use; part 2: particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:2007 Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6/AMD1:1994 Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements; Amendment 1
IEC 60730-2-18:1997 Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
IEC TR 61491:2010 Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives
IEC 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems

International Organization for Standardization (ISO), Sensing and Machine Control

ISO 7626-1:2011 Mechanical vibration and shock - Experimental determination of mechanical mobility - Part 1: Basic terms and definitions, and transducer specifications
ISO 7626-1:1986 Vibration and shock; Experimental determination of mechanical mobility; Part 1 : Basic definitions and transducers
ISO 11783-5:2011 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 5: Network management
ISO 11783-13:2011 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 13: File server
ISO 13990-1:2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 1: Vocabulary
ISO 13990-2:2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 2: Connecting dimensions for yarn feeders and yarn control devices
ISO 11783-8:2006 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 8: Power train messages
ISO 11783-10:2009 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange
ISO 11783-10:2015 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange
ISO 13990-3:2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 3: Dimensions for connecting and interconnection cables

RO-ASRO, Sensing and Machine Control

STAS R 12581-1987 CAMAC SYSTEM Block transfers
STAS 11535/2-1983 Hydraulic drives MINIATURIZED SLIDING SPOOL VALVES, WITH MECHANICAL CONTROL Basic dimensions

RU-GOST R, Sensing and Machine Control

GOST IEC 60730-2-6-2014 Automatic electrical controls for household and similar use. Part 2-6. Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
GOST EN 894-3-2012 Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 3. Control actuators
GOST EN 894-1-2012 Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 1. General principles for human interactions with displays and control actuators
GOST R IEC 60715-2003 Low-voltage switchgear and controlgear. Mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations
GOST R 52648-2006 Machines and equipment for timber floating. Safety requirements. Control methods of safety requirements
GOST R 59506-2021 Safety of machinery. Security aspects related to functional safety of safety-related control systems
GOST R 51341-1999 Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 2. Displays
GOST R IEC 62061-2013 Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
GOST R IEC 62061-2015 Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
GOST 26336-1984 Tractors, mahinery for agricultural and foresty, powered lamn and garden equipment. System of symbols for designation of operating controls and means of illustration of information. Symbols

GOSTR, Sensing and Machine Control

GOST IEC 60730-2-6-2019 Automatic electrical controls. Part 2-6. Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Standard Association of Australia （SAA）, Sensing and Machine Control

AS 2956.4:1988 Earth-moving machinery - Instrumentation and operator's controls - Symbols
AS/NZS 4024.1901:2014
AS 4024.1901:2006 Safety of machinery - Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - General principles for human interactions with displays and control actuators

Underwriters Laboratories (UL), Sensing and Machine Control

UL 60730-2-6 (ND)-2016 UL Standard for Safety Automatic Electrical Controls – Part 2-6: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements (Third Edition)
UL 60730-2-6-2013 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements (Second Edition)
UL 60730-2-6 BULLETIN-2016 UL Standard for Safety Automatic Electrical Controls – Part 2-6: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements (COMMENTS DUE: November 29@ 2016)
UL 8730-2-18 BULLETIN-1998 UL Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water and Air Flow Sensing Controls Including Mechanical Requirements
UL 60730-2-18-2004 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water and Air Flow Sensing Controls@ Including Mechanical Requirements (First Edition)
UL 60730-2-6-2002 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements (First Edition; Remains Current)
UL 60730-2-6 BULLETIN-2012 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements (COMMENTS DUE: September 21@ 2012)
UL 60730-2-6 BULLETIN-2013 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements (COMMENTS DUE: April 09@ 2013)
UL 60730-2-6 (ND)-2002 National Differences For UL 60730-2-6 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements (First Edition; Remains Cu
UL 8730-2-6-1998 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements (First Edition; Reprint with Revisions Through and Inc
UL 8730-2-18 PROPOSED-1998 (Draft)(Draft)UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electric Water and Air Flow Sensing Controls Including Mechanical Requirements Proposed First Edition; Com
UL 60730-2-18 (ND)-2004 National Differences For UL 60730-2-18 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water and Air Flow Sensing Controls Including Mechanical Requirements (First Edition)

Canadian Standards Association (CSA), Sensing and Machine Control

CAN/CSA-E730-2-6-1994 Automatic electrical controls for household and similar use Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
CAN/CSA-E730-2-6 AMD 2-2002 Amendment 2 Automatic electrical controls for household and similar use – Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
CAN/CSA-E730-2-6 AMD 1-2002 Amendment 1 Automatic Electrical Controls for Household and Similar Use Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements

AT-OVE/ON, Sensing and Machine Control

OVE EN 60730-2-6-2020 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements (IEC 60730-2-6:2015 + A1:2019) (german version)

AENOR, Sensing and Machine Control

UNE-EN 60730-2-6:2009 Automatic electrical controls for household and similar use -- Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
UNE-EN 894-1:1997+A1:2009 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

国家市场监督管理总局、中国国家标准化管理委员会, Sensing and Machine Control

GB/T 24113.2-2019 Electrical equipment of machines—Computer control systems for plastics machinery—Part 2：Test and evaluation method
GB/T 41273-2022 Production process quality control—System model and architecture—Machining
GB/T 38874.1-2020 Tractors and machinery for agriculture and forestry—Safety-related parts of control systems—Part 1：General principles for design and development
GB/T 38874.4-2020 Tractors and machinery for agriculture and forestry—Safety-related parts of control systems—Part 4：Production,operation,modification and supporting processes

工业和信息化部/国家能源局, Sensing and Machine Control

JB/T 12986-2016 Industrial machinery and electrical equipment and systems Plastic machinery control system interface and communication protocol

中国轻工总会, Sensing and Machine Control

QB 2099.5-1995 Special requirements (including mechanical requirements) for pressure-sensitive controllers for electrical automatic controls for household and similar purposes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Sensing and Machine Control

GB/T 30269.302-2015 Information technology—Sensor network—Part 302: Communication and information exchange: Medium access control（MAC） and physical layer（PHY） specification for reliable wireless sensor networks
GB/T 35381.8-2017 Tractors and machinery for agricultural and forestry—Serial control and communications data network—Part 8：Power train messages

American National Standards Institute （ANSI), Sensing and Machine Control

ANSI/EIA 484-A:1995 Electrical and Mechanical Interface Characteristics and Line Control Protocol Using Communication Control Characters for Serial Data Link Between a Direct Numerical Control System and Numerical Control Equipment Employing Asynchronous Full Duplex Transmis

Lithuanian Standards Office , Sensing and Machine Control

LST EN 60730-2-6-2009 Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements (IEC 60730-2-6:2007, modified)
LST EN 894-1-1999+A1-2009 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

Professional Standard - Post and Telecommunication, Sensing and Machine Control

YD/T 1193.4-2002 Bearer Independent Call Control (BICC) specification ----Part 4: Application transport Mechanism (APM),tunneling and IP bearer control protocol of BICC

International Telecommunication Union (ITU), Sensing and Machine Control

ITU-T Q.1902.5-2001 Bearer Independent Call Control Protocol (Capability Set 2): Exceptions to the Application Transport Mechanism in the Context of BICC Series Q: Switching and Signalling Specifications of Signalling Related to Bearer Independent Call Control (BICC) Study G
ITU-T Q.1902.5 FRENCH-2001 Bearer Independent Call Control protocol (Capability Set 2): Exceptions to the application transport mechanism in the context of BICC
ITU-T Q.1902.5 SPANISH-2001 Bearer Independent Call Control protocol (Capability Set 2): Exceptions to the application transport mechanism in the context of BICC
ITU-T J.176-2002 IPCablecom management event mechanism MIB SERIES J: CABLE NETWORKS AND TRANSMISSION OF TELEVISION SOUND PROGRAMME AND OTHER MULTIMEDIA SIGNALS IPCablecom Study Group 9

CZ-CSN, Sensing and Machine Control

CSN 47 0175-1984 Agricultural and forestry machinery and tractors Methods of measuring forces on the control elements Safety of work

European Committee for Electrotechnical Standardization（CENELEC）, Sensing and Machine Control

EN 60730-2-6:2008 Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
EN 60730-2-6:2016 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

CENELEC - European Committee for Electrotechnical Standardization, Sensing and Machine Control

EN 60730-2-6:1995 Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements (Incorporates Amendments A1: 1997 and A2: 1998)
EN 60730-2-18:1999 Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Automatic Electrical Water and Air Flow Sensing Controls@ Including Mechanical Requirements (Incorporates Amendment A11: 2005)

Danish Standards Foundation, Sensing and Machine Control

DS/ISO 11783-8:2006 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 8: Power train messages
DS/EN 894-1+A1:2010 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

Professional Standard - Electron, Sensing and Machine Control

SJ/Z 9107.3-1987 Operating conditions for industrial-process measurement and control equipment Part 3: Factors of mechanical influences

European Committee for Standardization (CEN), Sensing and Machine Control

prEN 894-1-1992 Safety of machinery; ergonomics requirements for the design of displays and control actuators; part 1: human interactions with displays and control actuators
EN ISO 13849-1:2023 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2023)
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
prEN 709-1992 Safety requirements for agricultural and forestry machinery; pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s)
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)

ZA-SANS, Sensing and Machine Control

SANS 60730-2-6:2007 Automatic electrical controls for household and similar use Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
SANS 60730-2-18:2007 Automatic electrical controls for household and similar use Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements

Japanese Industrial Standards Committee (JISC), Sensing and Machine Control

JIS C 9730-2-6:2000 Automatic electrical controls for household and similar use -- Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
JIS C 9730-2-6:2010 Automatic electrical controls for household and similar use -- Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
JIS B 9961:2008 Safety of machinery -- Functional safety of safety-related electrical, electronic and programmable electronic control systems
JIS C 9730-2-18:2004 Automatic electrical controls for household and similar use -- Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements

CEN - European Committee for Standardization, Sensing and Machine Control

EN ISO 13849-1:2006 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Sensing and Machine Control

ASHRAE OR-10-058-2010 Relationship between HVAC Airflow Rates and Noise Levels@ and Noise Control in a Mechanically-Ventilated University Building