ZH
RU
ES
board size
board size, Total:395 items.
In the international standard classification, board size involves: Machine tool systems, Particle size analysis. Sieving, Graphic technology, Iron and steel products, Wood-based panels, Photography, Sports equipment and facilities, Furniture, Printed circuits and boards, Chipless working equipment, Commercial vehicles, Industrial automation systems, Agricultural machines, implements and equipment, Electrical accessories, Electronic component assemblies, Seals, glands, Construction materials, Linear and angular measurements, Wood, sawlogs and sawn timber, Paper and board, Insulation, Manufacturing forming processes, Semi-manufactures of timber, Cutting tools, Rails and railway components, Mechanical structures for electronic equipment, Materials for aerospace construction, Textile machinery, Rubber and plastics products, Products of non-ferrous metals, Industrial trucks, Elements of buildings, Road engineering, Bearings, Building accessories, Reinforced plastics, Protection against fire, Alarm and warning systems, Microbiology, Textile fibres, Protection of and in buildings, Technical drawings, Mining equipment, Surface treatment and coating, Fasteners, Medical equipment, Cases. Boxes. Crates, Springs.
CZ-CSN, board size
HU-MSZT, board size
RO-ASRO, board size
SE-SIS, board size
- SIS SS 81 51 11-1986 Ceilings - Dimensions
- SIS 23 28 13 E-1972 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
- SIS 81 21 01-1971 Concrete sandwich panels. Dimensions
- SIS 23 51 02-1964 Fibre building boards. Determination oj dimensions
- SIS SMS 960-1973 Mould bases. Dimensions for plates. Guide I i nes for design
- SIS SS 22 68 05 E-1973 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
- SIS SS 81 24 10-1992 Precast concrete products — Floor slabs — Dimensions
- SIS 22 68 05 E-1973 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
- SIS 81 24 03-1974 Concrete double T floor slabs. Dimensions and form
- SIS SS 21 12 10-1981 Steel — Uncoated cold rolled sheet — Dimensions and tolerances
- SIS 81 82 10-1972 Plane reinforced concrete cladding panels. Dimensions
- SIS 91 14 02-1968 Lift wells. Recesses for push button panels and direction indicators. Dimensions
- SIS SS 81 82 10-1992 Precast concrete products — Plane cladding panels — Dimensions
- SIS 23 27 20-1973 Laminated timber. Stock dimensions
- SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
- SIS SS 21 12 20-1985 Steel - Hot-dip Zn- and AlZn-coated cold rolled sheet - Dimensions and tolerances
- SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments
- SIS 92 35 04-1974 Floorings. Determination of dimensional changes and loss in weight on heating
- SIS SS-ISO 702-1:1992 Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 1: Type A
- SIS SS-ISO 702-3:1992 Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 3: Bayonet type
- SIS SS-EN 10 029-1991 Hot rolled steel plates 3 mm thick or above — Tolerances on dimensions, shape and m?ss
- SIS 83 34 10-1974 Window boards. Basic sizes
- SIS SS-ISO 702-2:1992 Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 2: Camlock type
- SIS 81 34 05-1973 Balcony floors. Coordinating sizes
- SIS 81 24 01-1972 Concrete floor slabs. Basic sizes
Professional Standard - Machinery, board size
German Institute for Standardization, board size
- DIN 24041:2021 Perforated plates - Dimensions
- DIN 24041:2022-06 Perforated plates - Dimensions
- DIN 24041:2022 Perforated plates - Dimensions
- DIN EN 315:2000 Plywood - Tolerances for dimensions; German version EN 315:2000
- DIN 24259-1:1979-03 Pumps; baseplates for machines, dimensions
- DIN EN 315:2000-10 Plywood - Tolerances for dimensions; German version EN 315:2000
- DIN 75013:2015 Tank trucks - Grounding plate - Dimensions
- DIN 75013:1979 Tank trucks; grounding plate, dimensions
- DIN 75013:2015-12 Tank trucks - Grounding plate - Dimensions
- DIN 47611:1978 Terminal block for telecommunication systems; dimensions
- DIN 65389:1996 Aerospace - Cold-rolled steel sheet - Dimensions, masses
- DIN 65389:1996-10 Aerospace - Cold-rolled steel sheet - Dimensions, masses
- DIN EN ISO 18286:2010-11 Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008); German version EN ISO 18286:2010
- DIN 68126-1:1983 Profile boards with chamfer and broad root; dimensions
- DIN 24041:2002 Perforated plates - Dimensions
- DIN 5902:1995 Fishplates for grooveless flat bottom rails dimensions - Steel types
- DIN 41494-1:1974 Panel mounting racks for electronics equipments; racks and panels, dimensions
- DIN EN 62496-2-2:2011-09 Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards (IEC 62496-2-2:2011); German version EN 62496-2-2:2011
- DIN 9122:1978 Aerospace; soft foam, sheets of asbestos (Chrysotil), dimensions
- DIN 5902:1995-11 Fishplates for grooveless flat bottom rails dimensions - Steel types
- DIN 19720:1991 Concrete ground plates for surface boxes; dimensions, types
- DIN EN 10029:2011-02 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape; German version EN 10029:2010
- DIN 59745:2004 Sheet of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form
- DIN 59740:2004 Sheets of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
- DIN 86076:1988 Elastomer sealing sheets, seawater resistant, oil resistant; dimensions, requirements, testing
- DIN 59740:2004-07 Sheets of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
- DIN 59745:2004-07 Sheet of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form
- DIN EN 2131:2003 Aerospace series - Plates in aluminium alloys, thickness 6 mma160 mm - Dimensions; German and English version EN 2131:2001
- DIN 68707:2016 Molded plywood and laminated wood for furniture - Requirements for dimensions and quality features
- DIN EN 1107-1:1999 Flexible sheets for waterproofing - Determination of dimensional stability - Part 1: Bitumen sheets for roof waterproofing; German version EN 1107-1:1999
- DIN 59220:2000 Flat products of steel - Hot rolled patterned plate - Dimensions, mass, tolerances on dimensions, shape and mass
- DIN 18101:1985 Doors; doors for residential buildings; sizes of door leaves, position of hinges and lock, interdependence of dimensions
- DIN EN 2617:2003 Aerospace series - Plates in titanium and titanium alloys, thickness 6 mma100 mm - Dimensions; German and English version EN 2617:2001
- DIN 9122:1978-09 Aerospace; soft foam, sheets of asbestos (Chrysotil), dimensions
- DIN 59746:2004 Strip and sheet of straightened strip sections of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form
- DIN EN 1107-1:1999-10 Flexible sheets for waterproofing - Determination of dimensional stability - Part 1: Bitumen sheets for roof waterproofing; German version EN 1107-1:1999
- DIN 65390:1989-10 Aerospace; hot-rolled steel sheet and plate; dimensions, masses
- DIN EN ISO 18286:2010 Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008); German version EN ISO 18286:2010
- DIN EN 2590:2017 Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions; German and English version EN 2590:2017
- DIN EN 1107-2:2001 Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 1107-2:2001
- DIN 24539-2:1985 Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth
- DIN EN 1107-2:2001-04 Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 1107-2:2001
- DIN EN 10029:2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape; German version EN 10029:2010
- DIN 11747:1992 Agricultural tractors and machinery; leaf springs for trailers; dimensions
- DIN 24539-1:1985 Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; single anchor plates; dimensions, designations, mounting depth
- DIN EN 2590:2017-06 Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions; German and English version EN 2590:2017
- DIN 58795:2010-02 Medical instruments - Mouth gags - Dimensions for slide bars and tongue depressors
Institute of Interconnecting and Packaging Electronic Circuits (IPC), board size
- IPC D-322-1984 Guidelines for Selecting Printed Wiring Board Sizes Using Standard Panel Sizes
- IPC 2615-2000 Printed Board Dimensions and Tolerances
- IPC TR-483-1984 Dimensional Stability Testing of Thin Laminates Addendum: March 1991
- IPC TM-650 2.4.39-1986 Dimensional Stability, Glass Reinforced Thin Laminates; Revision A - February 1986
VN-TCVN, board size
PL-PKN, board size
IN-BIS, board size
IPC - Association Connecting Electronics Industries, board size
RU-GOST R, board size
PT-IPQ, board size
American National Standards Institute （ANSI), board size
Indonesia Standards, board size
AT-ON, board size
- ONORM EN 315-1993 Plywood - Tolerances for dimensions
- ONORM F 3090-1981 Non-automatic fire push buttons; plates; dimensions and requirements
- ONORM M 3230-1986 Steel bars; hol rolledflats; dimensions, masses, permissible deviations
- ONORM S 4224-1988 Diving accessories; fins;
- ONORM EN 10029-1991 Hot rolled steel plates 3 mm thick or above -Tolerances on dimensions, shape and mass
- ONORM EN 324-1-1993 Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length
- ONORM L 5290-1988 Slotted floors for animal breeding; dimensions, design loads, construction, testing, marking of conformity
- ONORM EN 324-2-1993 Wood-based panels- Determination of dimensions of boards - Part 2: Determination of squareness and edge straigthness
- ONORM F 3031-1996 Components of automatic fire detection Systems -Fire brigade panel - Dimensions, requirements, test specifications
- ONORM A 5102-1993 Means of packaging - Boxes manufactured from board, solid fibre-board and corrugated board - Determination of dimensions of box blanks
Association Francaise de Normalisation, board size
- NF B51-357:1993 PLYWOOD. TOLERANCES FOR DIMENSION. (EUROPEAN STANDARD EN 315).
- NF B51-357*NF EN 315:2001 Plywood - Tolerances for dimensions
- NF B54-110:1985 Particle boards. Dimensional characteristics.
- NF EN 315:2001 Contreplaqué - Tolérances sur dimensions
- NF P21-352:1995 Glued laminated timber. Sizes. Permissible deviations.
- NF P08-102:1963 Roofing. General. Dimensional inspection of corrugated sheets.
- NF E81-051:1975 Metal working-chequered plates-dimensions and tolerances.
- NF EN ISO 18286:2010 Tôles en acier inoxydable laminées à chaud - Tolérances sur les dimensions et la forme
- NF A46-322:1981 Iron and steel. Corrugated galvanized steel sheet. Dimensions and tolerances.
- NF B54-160:1970 Veneer plywood for general use. Dimensions and tolerances.
- NF E66-156:1985 Hexagonal dienuts. Dimensions.
- NF EN 10067:1996 Plats à boudin laminés à chaud - Dimensions et tolérances sur la forme, les dimensions et la masse
- NF L11-214*NF EN 2590:2018 Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions
- NF A46-504*NF EN ISO 18286:2010 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
- NF ISO 6987:2012 Plaquettes amovibles en matériaux durs avec arrondi de pointe et trou de fixation partiellement cylindrique - Dimensions
- NF T48-101:1994 Asbestos and rubber compressed sheets for seals. Measurement of dimensions.
- NF ISO 16462:2014 Plaquettes en nitrure de bore cubique, brasées ou monobloc - Dimensions, types
- NF E75-209:1982 Bonded abrasive products. Supporting plate for grinding wheels. Dimensions. Tightening characteristics.
- NF P38-403:1983 TRANSLUCENT GLASS-FIBER REINFORCED POLYESTER CORRUGATED SHEETS. DIMENSIONAL CHARACTERISTICS.
- NF A46-110-2:1997 Cold-rolled stainless steel wide strip and plate/sheet. Tolerances on dimensions and shape.
- NF P34-401:1977 Roofing. Ribbed sheets made from galvanized steel either prelaquered or not. Dimensional characteristics.
- NF L15-130:1958 Semi-finished products made of metal or non-ferrous alloys. Titanium sheet, dimensions and tolerances.
- NF B51-240-1*NF EN 324-1:1993 Wood-base panels. Determination of dimensions of boards. Part 1 : determination of thickness, width and length.
- NF E22-374:1984 NEEDLE ROLLER BEARINGS. THRUST NEEDLE ROLLER AND CAGE ASSEMBLIES,THRUST WASHERS. DIMENSIONS AND TOLERANCES.
- NF EN 10029:2011 Tôles en acier laminées à chaud, d'épaisseur égale ou supérieure à 3 mm - Tolérances sur les dimensions et la forme
- NF B51-240-2*NF EN 324-2:1993 Wood-based panels. Determination of dimensions of boards. Part 2 : determination of squareness and edge straightness.
- NF EN 1107-1:1999 Feuilles souples d'étanchéité - Partie 1 : feuilles d'étanchéité de toiture bitumineuses - Détermination de la stabilité dimensionnelle
- NF ISO 9361-1:2014 Plaquettes amovibles pour outils coupants - Plaquettes en céramique avec arrondi de pointe - Partie 1 : dimensions des plaquettes sans trou de fixation
- NF A46-503:1991 Hot rolled steel plates 3 mm thick or above. Tolerances on dimensions, shape and mass.
- NF P38-402:1985 TRANSLUCENT GLASS FIBRE REINFORCED RIBBED POLYESTER SHEETS. DIMENSIONAL CHARACTERISTICS.
- NF EN 1107-2:2001 Feuilles souples d'étanchéité - Détermination de la stabilité dimensionnelle - Partie 2 : feuilles d'étanchéité de toiture plastiques et élastomères
- NF P34-401-2:2022 Pre-painted or unpainted galvanised ribbed steel sheets - Dimensional characteristics - Part 2: Flat roofing
- NF A08-315*NF EN 10363:2016 Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape
- NF E04-760-3:1994 Manually operated draughting machines. Part 3 : dimensions of scale rule chuck plates.
- NF P84-100*NF EN 1107-2:2001 Flexible sheets for waterproofing - Determination of dimensional stability - Part 2 : plastic and rubber sheets for roof waterproofing.
- NF S90-426:1988 Medico-surgical equipment. Implants for surgery. Rough surface diaphysis plates made of stainless steel. Dimensional and surface characteristics.
- NF EN 2590:2018 Série aérospatiale - Acier - Tôles et plaques laminées à chaud - Dimensions
European Committee for Standardization (CEN), board size
- EN 315:2000 Plywood - Tolerances for dimensions
- EN 315:1993 Plywood - Tolerances for Dimensions
- EN 390:1994 Glued Laminated Timber - Sizes - Permissible Deviations
- prEN 390-1990 Glued laminated timber; dimensions; permissible deviations
- EN ISO 18286:2010 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
- EN 1910:2016 Wood flooring and wood panelling and cladding - Determination of dimensional stability
- EN 1910:2013 Wood flooring and wood panelling and cladding - Determination of dimensional stability
- prEN 315-1992 Plywood; tolerances for dimensions
- EN 324-1:1993 Wood-based panels; determination of dimensions of boards; part 1: determination of thickness, width and length
- prEN 324-1-1992 Wood-based panels; determination of dimensions of boards; part 1: determination of thickness, width and length
- EN 10029:1991 Hot Rolled Steel Plates 3 mm Thick or Above - Tolerances on Dimensions, Shape and Mass
- EN 1107-1:1999 Flexible sheets for waterproofing - Determination of dimensional stability - Part 1: Bitumen sheets for roof waterproofing
- EN 324-2:1993 Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness
- prEN 324-2-1992 Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness
- EN 10363:2016 Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape
- EN 1107-2:2001 Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
Danish Standards Foundation, board size
- DS/EN 315:1993 Plywood. Tolerances for dimensions
- DS/EN 315:2000 Plywood - Tolerances for dimensions
- DS 1114-1:1989 Corrugated sheets for roofing. Measurement of dimensions
- DS 1097.4:1975 Floorings. Determination of dimensional changes and lose in weight on heating
- DS/EN ISO 18286:2010 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
- DS/ISO 7918:1986 Forestry machinery. Portable brush-saws. Saw-blade guard. Dimensions
- DS/ISO 6533:1984 Forestry machinery. Portable chain saws, front hand guard. Dimensions
- DS/EN 10029:2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
- DS/ISO 14548:2021 Photography – Dimensions of glass plates
- DS/EN 324-2:1994 Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness
- DS/EN 1107-1:2000 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability
- DS/EN 1107-2:2001 Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
NL-NEN, board size
- NEN-EN 315-1993 Plywood. Tolerances for dimensions
- NEN-EN 322-1993 Wood-based panels. Determination of moisture content
- NEN 3278-1966 Plywood. Classification. dimensions and tests
- NEN-EN 324-1-1993 Wood-based panels. Determination of dimensions of boards. Part 1: Determination of thickness, width and length
- NEN-EN 324-2-1993 Wood-based panels. Determination of dimensions of boards. Part 2: Determination of squareness and edge straightness
Lithuanian Standards Office , board size
- LST EN 315-2001 Plywood - Tolerances for dimensions
- LST EN ISO 18286:2010 Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008)
- LST EN 10029-2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
- LST EN 324-2-1999 Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness
- LST EN 1107-1-2001 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability
- LST EN 1107-2-2003 Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
AENOR, board size
- UNE-EN 315:2001 PLYWOOD - TOLERANCES FOR DIMENSIONS.
- UNE-EN ISO 18286:2011 Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008)
- UNE-EN 10029:2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
- UNE-EN 1107-2:2001 Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing.
- UNE 37203:1978 LEAD SHEET. DEFINITIONS, DIMENSIONS AND TOLERANCES.
British Standards Institution (BSI), board size
- BS EN 315:2000 Plywood - Tolerances for dimensions
- BS EN 1023-1:1997 Office furniture - Screens - Dimensions
- BS ISO 14548:2021 Photography. Dimensions of glass plates
- 21/30432756 DC BS ISO 14548. Photography. Dimensions of glass plates
- 12/30257543 DC BS ISO 1954. Plywood. Tolerances on dimensions
- BS EN 62496-2-2:2011 Optical circuit boards. Measurements. Dimensions of optical circuit boards
- BS EN ISO 18286:2010 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
- BS EN 2590:2017 Aerospace series. Steel. Sheets and plates, hot rolled. Dimensions
- BS EN 324-1:1993 Wood-based panels. Determination of dimensions of boards. Determination of thickness, width and length
- BS EN 324-2:1993 Wood-based panels. Determination of dimensions of boards. Determination of squareness and edge straightness
- BS ISO 6533:2020 Forestry machinery. Portable chain-saw front hand-guard. Dimensions and clearances
- 19/30376302 DC BS ISO 6533. Forestry machinery. Portable chain-saw front hand-guard. Dimensions and clearances
- BS EN 1107-1:2000 Flexible sheets for waterproofing - Determination of dimensional stability - Bitumen sheets for roof waterproofing
- BS EN 10259:1997 Cold-rolled stainless and heat resisting steel wide strip and plate/sheet - Tolerances on dimensions and shape
- BS EN 10259:1997(1998) Cold-rolled stainless and heat resisting steel wide strip and plate/sheet - Tolerances on dimensions and shape
- BS EN 1107-2:2001 Flexible sheets for waterproofing - Determination of dimensional stability - Plastic and rubber sheets for roof waterproofing
- BS ISO 7918:1996 Forestry machinery - Portable brush cutters and grass trimmers - Cutting attachment guard dimensions
- BS 2782-6 Method 641A:1983 Methods of testing plastics - Dimensional properties - Determination of dimensional stability at 100 °C of flexible polyvinyl chloride sheet
- BS EN 10363:2016 Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip. Tolerances on dimensions and shape
Professional Standard - Electron, board size
International Organization for Standardization (ISO), board size
- ISO 1954:1999 Plywood - Tolerances on dimensions
- ISO 1097:1975 Plywood; Measurement of dimensions of panels
- ISO 1954:2013 Plywood.Tolerances on dimensions
- ISO 7452:2002 Hot-rolled structural steel plates - Tolerances on dimensions and shape
- ISO 18286:2004 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
- ISO 7452:1984 Hot-rolled structural steel plates; Tolerances on dimensions and shape
- ISO 16160:2000 Continuously hot-rolled steel sheet products - Dimensional and shape tolerances
- ISO 18286:2008 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
- ISO 7452:2013 Hot-rolled steel plates - Tolerances on dimensions and shape
- ISO 7918:1985 Forestry machinery; Portable brush-saws; Circular saw-blade guard; Dimensions
- ISO 9444:1990 Hot-rolled stainless steel wide strip and sheet; tolerances on dimensions and form
- ISO 9445:1990 Cold-rolled stainless steel wide strip and sheet; tolerances on dimensions and form
- ISO 14548:1998 Photography - Dimensions of glass plates
- ISO 14548:2021 Photography — Dimensions of glass plates
- ISO 2184-1:1972 Industrial castors; Dimensions of top plates; Part I : Oblong top-plates with 4 bolt holes
- ISO/TR 7469:1977 Dimensional stability of hardboards
- ISO 7918:1995 Forestry machinery - Portable brush-cutters and grass-trimmers - Cutting attachment guard dimensions
- ISO 9426:2003 Wood-based panels - Determination of dimensions of panels
- ISO 2184:1972 Industrial castors; Dimensions of top plates; Part I : Oblong top-plates with 4 bolt holes
- ISO/TR 7469:1981 Dimensional stability of hardboards
- ISO 6361-4:1988 Wrought aluminium and aluminium alloy sheets, strips and plates; part 4: sheets and plates; tolerances on shape and dimensions
- ISO 7226:1998 Hexagonal dienuts
- ISO 7226:1988 Hexagonal dienuts
- ISO 9034:1987 Hot-rolled structural steel wide flats; Tolerances on dimensions and shape
US-ACEI, board size
Korean Agency for Technology and Standards (KATS), board size
- KS C IEC TR 60668-2004(2009) Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments
- KS X ISO 12635:2006 Graphic technology-Plates for offset printing-Dimensions
- KS B 7737-2001 Dimensions of landside bottoms of two-way oriental plows for agricultural tractors
- KS B 7737-1987 Dimensions of landside bottoms of two-way oriental plows for agricultural tractors
- KS D 3052-2002 Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS D ISO 18286-2005(2010) Hot-rolled stainless steel plates－Tolerances on dimensions and shape
- KS D ISO 18286:2005 Hot-rolled stainless steel plates-Tolerances on dimensions and shape
- KS D ISO 18286:2013 Hot-rolled stainless steel plates－Tolerances on dimensions and shape
- KS M 7122-2008 Testing method for sizing of paper and paperboard(Hercules method)
- KS B 7017-2013 Temperature and pressure gauges and its panel dimensions in high pressure dyeing machine
- KS D ISO 9445-2004(2019) Cold-rolled stainless steel wide strip and sheet－Tolerances on dimensions and form
- KS D ISO 9444-2004(2019) Hot-rolled stainless steel wide strip and sheet－Tolerances on dimensions and form
- KS B 7017-2005(2010) Temperature and pressure gauges and its panel dimensions in high pressure dyeing machine
- KS D 3053-1988(2018)
- KS F 2231-1999 Measuring method for dimensions and squareness of polystyrene composite wood wool cement boards
- KS F 2231-2016 Measuring method for dimensions and squareness of polystyrene composite wood wool cement boards
- KS F ISO 9426:2008 Wood-based panels-Determination of dimensions of panels
- KS B ISO 2184-1:2003 Industrial castors－Dimensions of top－plates－Part 1：Oblong top-plates with 4 bolt holes
- KS D ISO 9034:2005 Hot-rolled structural steel wide flats-Tolerances on dimensions and shape
- KS D ISO 9034:2013 Hot－rolled structural steel wide flats－Tolerances on dimensions and shape
BR-ABNT, board size
IT-UNI, board size
Professional Standard-Ships, board size
TR-TSE, board size
FI-SFS, board size
Military Standard of the People's Republic of China-General Armament Department, board size
ES-AENOR, board size
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, board size
未注明发布机构, board size
Professional Standard - Agriculture, board size
- GB/T 451.1-1989 Method for determination of dimensions and deflection of paper and board
AR-IRAM, board size
Aerospace, Security and Defence Industries Association of Europe (ASD), board size
- ASD-STAN PREN 3779-2001 Aerospace Series Polycarbonate Sheet Dimensions (Edition P 1)
- ASD-STAN PREN 4411-1998 Aerospace Series Sheets, Cold Rolled in Steel Thickness 0,5 mm Less Than or Equal to a Less Than or Equal to 3,0 mm Dimensions (Edition P 1)
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, board size
- PREN 3779-2001 Aerospace Series Polycarbonate Sheet Dimensions (Edition P 1)
- PREN 4367-2001 Aerospace Series Cast Acrylic Sheets Dimensions (Edition P 1)
YU-JUS, board size
European Association of Aerospace Industries, board size
CEN - European Committee for Standardization, board size
- EN 10259:1997 Cold-Rolled Stainless Steel Wide Strip and Plate/Sheet - Tolerances on Dimensions and Shape
KR-KS, board size
(U.S.) Builders Hardware Manufacturers Association, board size
BHMA - Builders Hardware Manufacturers Association Inc., board size
American Society for Testing and Materials (ASTM), board size
- ASTM F2199-02(2008) Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat
- ASTM F21-65(2002) Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
- ASTM F2199-20 Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
- ASTM D2658-18 Standard Test Method for Determining Dimensions of Fiberboard Boxes
- ASTM D2658-18(2023) Standard Test Method for Determining Dimensions of Fiberboard Boxes
European Committee for Electrotechnical Standardization（CENELEC）, board size
- HD 475 S1-1986 Dimensions of Planchets Used in Nuclear Electronic Instruments
ES-UNE, board size
- UNE-EN 2590:2017 Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions (Endorsed by Asociación Española de Normalización in April of 2017.)