ZH
RU
ES

Loading volume ratio

Loading volume ratio, Total:447 items.

In the international standard classification, Loading volume ratio involves: Testing of metals, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Measurement of fluid flow, Products of non-ferrous metals, Particle size analysis. Sieving, Electrical wires and cables, Packaging and distribution of goods in general, Air quality, Ceramics, Construction materials, Fluid power systems, Fuels, Linear and angular measurements, Road engineering, Mining and quarrying, Products of the chemical industry, Powder metallurgy, Wastes, Analytical chemistry, Refractories, Transformers. Reactors, Water quality, Soil quality. Pedology, Paints and varnishes, Corrosion of metals, Cellular materials, Inorganic chemicals, Road vehicles in general, Coals, Fertilizers, Surface treatment and coating, Paper and board, Equipment for petroleum and natural gas industries, Insulation, Production of metals, Fluid storage devices, TESTING, Waxes, bituminous materials and other petroleum products, Non-textile floor coverings, Radiation protection, Plastics, Raw materials for rubber and plastics, Ferroalloys, Welding, brazing and soldering, Pumps, Wood, sawlogs and sawn timber, Birth control. Mechanical contraceptives, Protection against dangerous goods, Metrology and measurement in general, Milk and milk products, Quality, Electrical accessories.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Loading volume ratio

GB/T 31522-2015 Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<下标3>Sn composite superconducting wires
GB/T 22587-2008 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
GB/T 22587-2017 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method
GB 5270-1985 Metal coatings on metal substrates (electrodeposited and chemically deposited)
GB/T 2922-1982 Chemical reagents--Determination of specific surface area of solid supports used in chromatography
GB/T 13072-2010 Geological water samples.Determination of radioactive ratios Ra/Ra.Emanation-β counting techniques
GB/T 5270-1985 Metallic coatings on metallic substrates--Electrodeposited and chemically deposited coatings--Review of methods available for testing adhesion
GB/T 5270-2005 Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion
GB/T 13071-2010 Geological waters samples.Determination of radioactive ratios U/U and Th/Th.Extraction chromatograph and alpha spectrometry measure
GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
GB/T 13235.2-1991 Petroleum and liquid petroieum products--Volumetric calibration of vertical cylindrical metal tanks--Optical reference line method
GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

TR-TSE, Loading volume ratio

TS 3496-1980 DETERMINATION OF SPECIFIC SURFACE AREA OF POWDERED ORE SAMPLES
TS 365-1966 DETERM?NATION OF MOISTURE ?N THE ANALYSIS SAMPLE OF COAL BY THE DIRECT VOLUMETRIC METHOD

British Standards Institution (BSI), Loading volume ratio

BS EN 61788-12:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-12:2002 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-12:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-5:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2001 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
BS DD ISO/TS 3716:2006 Hydrometry - Functional requirements and characteristics of suspended-sediment samplers
BS ISO 7181:1997 Hydraulic fluid power. Cylinders. Bore and rod area ratios
BS ISO 6421:2012 Hydrometry. Methods for assessment of reservoir sedimentation
BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
BS EN 14702-1:2006(2007) Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
BS ISO 9277:2022 Tracked Changes. Determination of the specific surface area of solids by gas adsorption. BET method
21/30419294 DC BS ISO 9277. Determination of the specific surface area of solids by gas adsorption. BET method.
BS EN 14702-1:2006 Characterization of Sludges. Settling Properties. Part 1: Determination of Settleability (Determination of the Proportion of Sludge Volume and Sludge Volume Index)
BS EN 14702-1:2007 Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
BS 5551-2.7:1988 Fertilizers - Sampling - Recommendations for minimum mass of increment of a solid fertilizer to be taken to be representative of the total sampling unit
BS EN ISO 4590:2016 Tracked Changes. Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
BS 6169-2:1984 Methods for volumetric measurement of liquid hydrocarbons - Turbine meter systems
BS EN ISO 13138:2012 Air quality. Sampling conventions for airborne particle deposition in the human respiratory system
BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
BS ISO 3320:2013 Fluid power systems and components. Cylinder bores and piston rod diameters and area ratios. Metric series
BS EN 12697-6:2020 Tracked Changes. Bituminous mixtures. Test methods. Determination of bulk density of bituminous specimens
BS 4359-1:1996 Determination of the specific surface area of powders. BET method of gas adsorption for solids (including porous materials)
BS 6200-3.5.2:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of boron - Ferroboron: volumetric method
PD ISO/TR 19969:2018 Guidance on sample handling for determination of bursting volume and pressure, and testing for freedom from holes for male condom
BS EN 13071-1:2008 Stationary waste containers up to 5000 l, top lifted and bottom emptied - General requirements
BS EN ISO 18757:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of specific surface area of ceramic powders by gas adsorption using the BET method
BS EN 12919:1999 Workplace Atmoshperes - Pumps for the Sampling of Chemical Agents with a Volume Flow Rate of over 5 l/min - Requirements and Test Methods
BS EN ISO 3233-2:2019 Paints and varnishes. Determination of the percentage volume of non-volatile matter - Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the…
BS EN ISO 2819:1980 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion
BS EN ISO 18757:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method

Association Francaise de Normalisation, Loading volume ratio

NF EN 61788-12:2014 Supraconductivité - Partie 12 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/non-cuivre des fils en composite supraconducteur Nb3Sn
NF EN 61788-5:2014 Supraconductivité - Partie 5 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/supraconducteur des fils en composite supraconducteur Cu/Nb-Ti
NF C31-888-5*NF EN 61788-5:2014 Superconductivity - Part 5 : matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
FD CEN/TR 15298:2006 Produits alimentaires - Préparation d'échantillons gros volume pour l'analyse des mycotoxines - Comparaison entre broyage à sec et broyage par voie humide
NF C31-888-12:2003 Supraconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires.
NF C31-888-12*NF EN 61788-12:2014 Superconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
NF X11-620:1996 Determination of the specific surface area of solids by gas adsorption using the bet method.
NF ISO 9246:1995 Engins de terrassement - Lames de tracteurs sur chenilles ou sur roues - Évaluations volumétriques.
NF EN ISO 4590:2016 Plastiques alvéolaires rigides - Détermination du pourcentage volumique de cellules ouvertes et de cellules fermées
NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
NF EN 772-9/A1:2005 Méthodes d'essai des éléments de maçonnerie - Partie 9 : détermination du volume et du pourcentage de vides et du volume net absolu des éléments de maçonnerie en terre cuite et en silico-calcaire par remplissage de sable
NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
NF T20-520:1973 Sodium and potassium silicates for industrial use. Determination of density of samples in solution. Method using density hydrometer. Method using pyknometer.
NF P12-109/A1*NF EN 772-9/A1:2005 Methods of test for masonry units - Part 9 : determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling.
NF X43-200*NF EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system
NF E86-255:2006 Storage tanks - Parallelepipedic steel tanks with a capacity of 1 500 litres and more for aboveground storage of various liquids.
NF EN 16150:2012 Qualité de l'eau - Lignes directrices pour l'échantillonnage des macroinvertébrés benthiques en cours d'eau peu profonds au prorata des surfaces de recouvrement des habitats présents
NF EN ISO 11461:2014 Qualité du sol - Détermination de la teneur en eau du sol en fraction volumique, à l'aide de carottiers - Méthode gravimétrique
NF E48-019*NF ISO 3320:2014 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series
NF T30-085:2016 Paints and varnishes - Determination of the dry extract and of the dry coating density - Determination of the dry coating volumic ratio
NF X43-291*NF EN 14583:2021 Workplace exposure - Volumetric bioaerosol samplers - General requirements and evaluation of performance
NF B35-512:1983 Laboratory glassware. Glass hydrometers. Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids).
NF EN 772-3:1999 Méthodes d'essai des éléments de maçonnerie - Partie 3 : détermination du volume net et du pourcentage des vides des éléments de maçonnerie en terre cuite par pesée hydrostatique.
NF EN 14583:2021 Exposition sur les lieux de travail - Dispositifs de prélèvement volumétrique des bioaérosols - Exigences générales et évaluation des performances
NF ISO 8004:1986 Produits carbonés utilisés pour la production de l'aluminium - Coke calciné et produits carbonés calcinés - Détermination de la masse volumique au xylène - Méthode pycnométrique.
NF X43-252:1991 Air quality. Workplace air. Sampling and analysis of gaseous organic pollutants on charcoal. Pumping sampling.
NF X43-258:1991 Air quality. Workplace air. Sampling and analysis of gaseous organic pollutants on silicon gel. Sampling by pumping.
NF A89-575:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.
NF X43-267:2014 Air des lieux de travail - Prélèvement et analyse de gaz et vapeurs organiques - Prélèvement par pompage sur tube à adsorption et désorption au solvant
NF P98-818-7*NF EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7 : determination of the bulk density of bituminous specimens by gamma rays
NF V04-392:1995 BUTTER. DETERMINATION OF WATER, SOLIDS-NOT-FAT AND FAT CONTENTS ON THE SAME TEST PORTION (REFERENCE METHOD). (EUROPEAN STANDARD EN ISO 3727).
NF T30-141-2*NF EN ISO 3233-2:2019 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2 : method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Ar
NF X06-024:1993 Sequential sampling plans for inspection by attributes.

International Electrotechnical Commission (IEC), Loading volume ratio

IEC 61788-5:2013 Superconductivity.Part 5: Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
IEC 61788-12:2013 Superconductivity.Part 12: Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<(Index)3>Sn composite superconducting wires

CENELEC - European Committee for Electrotechnical Standardization, Loading volume ratio

EN 61788-12:2002 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires

Korean Agency for Technology and Standards (KATS), Loading volume ratio

KS C IEC 61788-5-2016(2021) Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS C IEC 61788-5:2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS T 1303-2022 Determination of ratio of spatial volume to total packaging volume for commercial packaging(consumer packaging)
KS A 0094-2014(2019) Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0082-2008 Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS A 0082-1993 Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS L 4008-2006 Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS L 4008-1981 Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS I ISO 11461:2005 Soil quality－Determination of soil water content calculatedon a volume basis(Gravimetric method)
KS D 0296-2019 Standard practice for determining area specific resistance of oxide scale formed on stainless steel plates
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS I ISO 16586:2009 Soil quality-Determination of soil water content as a volume fraction on the basis of known dry bulk density-Gravimetric method
KS F 2549-1997 Testing method for potential volume change of cement-aggregate combinations
KS M ISO 1552:2012 Liquid chlorine for industrial use-Method of sampling(for determining only the volumetric chlorine content)
KS M ISO 1552:2013 Liquid chlorine for industrial use－Method of sampling(for determining only the volumetric chlorine content)
KS L 3519-2017(2022) Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS M ISO 4590:2018 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS L 3519-1987 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS L 3519-1982 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS L ISO 18757-2012(2017) Fine ceramics－Determination of specific surface area of ceramic powders by gas adsorption using the BET method
KS L ISO 18757-2012(2022) Fine ceramics－Determination of specific surface area of ceramic powders by gas adsorption using the BET method
KS L 3519-2017 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS M ISO 21687:2011 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
KS M ISO 21687:2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS L 3519-1997 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS F 2446-2020 Standard test method for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS L 4008-2006(2021) Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS M ISO 3233-2002(2012) Paints and varnishes－Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
KS L 4008-2006(2016) Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS D ISO 2361-2015(2020) Electrodeposited nickel coatings on magnetic and non－magnetic substrates－Measurement of coating thickness－Magnetic method
KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS F 2496-2017(2022) Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS M ISO 29945-2017(2022) Refrigerated non-petroleum-based liquefied gaseous fuels — Dimethylether(DME) - Method of manual sampling onshore terminals
KS B ISO 1088:2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
KS B ISO 1088:2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement

KR-KS, Loading volume ratio

KS C IEC 61788-5-2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS M ISO 1552-2012 Liquid chlorine for industrial use－Method of sampling(for determining only the volumetric chlorine content)
KS M ISO 4590-2018 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS M ISO 21687-2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS B ISO 1088-2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement

IN-BIS, Loading volume ratio

IS 5534-1969
IS 11578-1986
IS 11239 Pt.5-1985
IS 101 Pt.8/Sec.6-1993 Methods of sampling and test for paints, varnishes and related products. Part 8: Tests for pigments and other solids. Section 6: Volume solids

ES-UNE, Loading volume ratio

UNE-EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (Endorsed by AENOR in November of 2013.)
UNE-EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (Endorsed by AENOR in October of 2013.)
UNE-EN 772-9:1999 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
UNE-EN 772-9:1999/A1:2008 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
UNE-EN ISO 4590:2017 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
UNE 43312:1982 ERRATUM:2011 Glass hydrometers. Conventional value for the thermal cubic-expansion coefficient (for use in the preparation of measurement tables for liquids)
UNE-EN 772-2:1999/A1:2005 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
UNE-EN 772-3:1999 METHODS OF TEST FOR MASONRY UNITS - PART 3: DETERMINATION OF NET VOLUME AND PERCENTAGE OF VOIDS OF CLAY MASONRY UNITS BY HYDROSTATIC WEIGHING.
UNE-EN 772-2:1999 METHODS OF TEST FOR MASONRY UNITS - PART 2: DETERMINATION OF PERCENTAGE AREA OF VOIDS IN AGGREGATE CONCRETE MASONRY UNITS (BY PAPER INDENTATION).

Danish Standards Foundation, Loading volume ratio

DS/EN 61788-5:2001 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
DS/EN 61788-12:2002 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
DS/EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
DS/EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
DS/EN ISO 4590:2003 Rigid cellular plastics - Determination of thevolume percentage of open cells and of closed cells
DS/EN 772-9/A1:2005 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling
DS/EN 772-9:1999 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling
DS/EN 14702-1:2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
DS/ISO 16586/Corr. 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
DS/ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
DS/ETS 300127:1994 Equipment Engineering (EE); Radiated emission testing of physically large telecommunication systems
DS/EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system
DS/EN 772-2/A1:2006 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
DS/EN 772-2:1999 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
DS/EN ISO 18757:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method

CU-NC, Loading volume ratio

NC 44-01-1965 SAMPLING ORES and CONCENTRATES in BULK
NC 82-11-1985 Fermentatlon Industry. "Torula" Dried Fodder Yeast. Determination of Bulk Specific Gravity
NC 54-279-1984 Construction Materials and Producis. Calcium Oxide and Calcium Hydrale Volumetric Determination of their Useful Percentage

Japanese Industrial Standards Committee (JISC), Loading volume ratio

JIS H 7308:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
JIS H 7304:2002 Superconductivity -- Part 5: Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
JIS H 7304:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
JIS H 7308:2006 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
JIS Z 8830:1990 Determination of the specific surface area of powders by gas adsorption methods
JIS Z 8830:2013 Determination of the specific surface area of powders (solids) by gas adsorption -- BET method
JIS Z 8830 ERRATUM 1:2002 Determination of the specific surface area of powders (solids) by gas adsorption method (Erratum 1)
JIS Z 8837:2018 Determination of density by volumetric displacement -- Skeleton density by gas pycnometry
JIS H 7503:2003 Method for measurement of cavity volume fraction of superplastically deformed metallic materials
JIS A 1161:1994 Testing methods for bulk specific gravity, water content, absorption and compressive strength of cellular concrete
JIS A 1135:1995 Methods of test for bulk specific gravity and absorption of light weight coarse aggregates for structural concrete
JIS B 9936:2001 Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system
JIS B 8366-1:2018 Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters and area ratios

European Committee for Electrotechnical Standardization（CENELEC）, Loading volume ratio

EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
EN 61788-5:2001 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors

The American Road & Transportation Builders Association, Loading volume ratio

AASHTO M 323-2013 Standard Specification for Superpave Volumetric Mix Design
AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens
AASHTO T166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens Twentieth Edition R(1998)
AASHTO T 275-1991 Standard Method of Tests for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens HM-22; PART IIB R(2000)
AASHTO T 354-2015 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
AASHTO TP 77-2014 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
AASHTO T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
AASHTO TP 77-2009 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
AASHTO T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

AASHTO - American Association of State Highway and Transportation Officials, Loading volume ratio

M 323-2007 Standard Specification for Superpave Volumetric Mix Design
M 323-2012 Standard Specification for Superpave Volumetric Mix Design
M 323-2004 Standard Specification for Superpave Volumetric Mix Design
M 323-2013 Standard Specification for Superpave Volumetric Mix Design
T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
MP2-1999 Standard Specification for Superpave (TM) Volumetric Mix Design
MP2-1997 Standard Specification for Superpave (TM) Volumetric Mix Design
T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T275-1991 Standard Specification for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens (Eighteenth Edition)
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
MP2-2000 Standard Specification for Superpave Volumetric Mix Design (2000 Edition)
T 166-1993 Standard Specification for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Eighteenth Edition)
T 275-1991 Standard Method of Tests for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens (HM-22; PART IIB)
T 166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Twentieth Edition)
T 354-2015 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
TP 77-2009 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
TP 77-2014 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
MP2-2001 Standard Specification for Superpave Volumetric Mix Design (2000 Edition; Interim Edition 4/2001)
T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
TP 82-2010 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Bituminous Mixtures Using Water Displacement Measured by Pressure Sensor

Lithuanian Standards Office , Loading volume ratio

LST EN 61788-5-2002 Superconductivity. Part 5: Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors (IEC 61788-5:2000)
LST EN 61788-12-2014 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013)
LST EN 61788-12-2003 Superconductivity. Part 12: Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2002)
LST EN 14702-1-2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
LST EN 772-9-2000 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
LST EN 772-9-2002/A1-2005 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
LST EN ISO 4590:2004 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002)
LST EN 772-2-2000/A1-2005 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
LST ISO 7033:1995 Fine and coarse aggregates for concrete. Determination of particle mass-per-volume and water absorption. Pyknometer method
LST EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
LST EN 772-2-2000 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
LST EN 12919-2001 Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods

International Organization for Standardization (ISO), Loading volume ratio

ISO 9277:2022 Determination of the specific surface area of solids by gas adsorption — BET method
ISO 6421:2012 Hydrometry - Methods for assessment of reservoir sedimentation
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
ISO 13317-3:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 3: X-ray gravitational technique
ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
ISO 11461:2001 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
ISO 12154:2014 Determination of density by volumetric displacement - Skeleton density by gas pycnometry
ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
ISO 13317-2:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method
ISO 10976:2012 Refrigerated light hydrocarbon fluids - Measurement of cargoes on board LNG carriers
ISO 10976:2015 Refrigerated light hydrocarbon fluids - Measurement of cargoes on board LNG carriers
ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system
ISO 13317-1:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1: General principles and guidelines
ISO/TS 3716:2006 Hydrometry - Functional requirements and characteristics of suspended-sediment samplers
ISO 3716:2021 Hydrometry - Functional requirements and characteristics of suspended-sediment samplers
ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
ISO 3320:2013 Fluid power systems and components.Cylinder bores and piston rod diameters and area ratios.Metric series
ISO 2819:1980 Metallic coatings on metallic substrates; Electrodeposited and chemically deposited coatings; Review of methods available for testing adhesion
ISO 2819:2017 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion
ISO/DIS 13061-14 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determination of volumetric shrinkage
ISO/TR 19969:2018 Guidance on sample handling for determination of bursting volume and pressure, and testing for freedom from holes for male condom
ISO 3727:1977 Butter; Determination of water, solids-not-fat and fat contents on the same test portion (Reference method)
ISO 13061-14:2016 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 14: Determination of volumetric shrinkage
ISO 18757:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method

German Institute for Standardization, Loading volume ratio

DIN ISO 9277:2014-01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN EN 61788-12:2014 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013); German version EN 61788-12:2013
DIN 66126:2015-08 Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
DIN EN 61788-5:2014 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC 61788-5:2013); German version EN 61788-5:2013
DIN 53219:2005 Paints and varnishes - Determination of percentage volume of non-volatile matter
DIN EN 772-9:2005-05 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling; German version EN 772-9:1998 + A1:2005
DIN EN ISO 4590:2016-12 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016); German version EN ISO 4590:2016
DIN EN 14702-1:2006-06 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index); German version EN 14702-1:2006
DIN ISO 16586:2012 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
DIN 19683-13:2007-07 Soil quality - Physical laboratory tests - Part 13: Determination of soil volume percentage, total pore volume and pore number of mineral soils
DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN 19683-14:2007-07 Soil quality - Physical laboratory tests - Part 14: Determination of soild volume percentage of bog soils
DIN 66132:1975 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Duembgen
DIN EN 772-9:2005 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling; German version EN 772-9:1998 + A1:2005
DIN EN ISO 13138:2012-04 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012); German version EN ISO 13138:2012
DIN 52170-1:1980 Determination of composition of hardened concrete; general, terms, sampling, dry-bulk density
DIN 66132:1975-07 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Dümbgen
DIN 12803-2:1981 Laboratory glassware; alcoholometry; alcoholometers for the alcoholic strength by volume
DIN 66134:1998 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN EN 772-2:2005-05 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation); German version EN 772-2:1998 + A1:2005
DIN 51913:2013 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN 66134:1998-02 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN EN 14583:2022 Workplace exposure - Volumetric bioaerosol samplers - General requirements and evaluation of performance
DIN EN 772-3:1998 Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing; German version EN 772-3:1998
DIN ISO 3320:2016 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series (ISO 3320:2013)
DIN 51925:1996 Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
DIN EN 16423:2014-02 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection; German version EN 16423:2013
DIN EN 12697-6:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2003+A1:2007
DIN EN ISO 18757:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003); English version of DIN EN ISO 18757:2006
DIN EN ISO 18757:2006-01 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003); German version EN ISO 18757:2005
DIN VDE 0611-4:1991 Terminal blocks for connecting copper conductors; distribution terminal blocks up to 6 mm<(hoch)2>

Professional Standard - Energy, Loading volume ratio

NB/SH/T 0571-2021 Determination of Specific Surface Area and Micropore Volume of Zeolite in Catalyst

GM Europe, Loading volume ratio

GME 8742-2007 Testing the Specific Volume Resistance of Elastomers, Plastics and Adhesives (English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14711.)
GME8742-2007 Pr眉fung des spezifischen Durchgangswiderstandes von Elastomeren, Kunststoffen und Klebstoffen Testing the Specific Volume Resistance of Elastomers, Plastics and Adhesives English/German; This specification may be applied only for current projects incl.

American Society for Testing and Materials (ASTM), Loading volume ratio

ASTM D347-04 Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar
ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM D1188-07 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188-07(2015) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1071-83(2003) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1188-07e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188/D1188M-22 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples
ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1188-96e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002)e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D3305-94(1999)e1 Standard Practice for Sampling Small Gas Volume in a Transformer
ASTM D1071-83(2008) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D4411-03(2019) Standard Guide for Sampling Fluvial Sediment in Motion
ASTM D2726-10 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D3305-94(2005) Standard Practice for Sampling Small Gas Volume in a Transformer
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D2799-99 Standard Test Method for Microscopical Determination of Volume Percent of Physical Components of Coal
ASTM D2799-09 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM D7229-08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D722-93(2007) Standard Test Method for Grease Resistance of Paper
ASTM D6093-97 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6093-97(2003) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D347-97 Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar
ASTM D6093-97(2011) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6093-97(2022) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D2726-04 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D5061-92(1997) Standard Test Method for Microscopical Determination of Volume Percent of Textural Components in Metallurgical Coke
ASTM D2726-00 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM C1039-85(2010)e1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
ASTM D2726-05 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM C1039-85(2020)e1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
ASTM C830-00 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C830-00(2016) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C830-00(2006) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM D5061-92(2004) Standard Test Method for Microscopical Determination of Volume Percent of Textural Components in Metallurgical Coke
ASTM E884-82(2006) Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities
ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM E1850-97 Standard Guide for Selection of Resident Species as Test Organisms for Aquatic and Sediment Toxicity Tests
ASTM D6301-08 Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water
ASTM D6752/D6752M-17 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-18 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM E2458-10 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents from Nonporous Surfaces
ASTM E1850-04(2012) Standard Guide for Selection of Resident Species as Test Organisms for Aquatic and Sediment Toxicity Tests
ASTM D4567-03 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D6752-03e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-03 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D4567-99 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2008) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D6752-09 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D4567-03(2013) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D3908-20 Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
ASTM B999-15(2022) Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate
ASTM C20-00(2022) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
ASTM D8097-17e1 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
ASTM D8097-17 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer

Taiwan Provincial Standard of the People's Republic of China, Loading volume ratio

CNS 14389-1999 Methods of measuring for specific surface area of fine ceramic powders by gas adsorption
CNS 11151-1984 Method of Test for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete
CNS 8759-1987 Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens
CNS 8757-1987 Method of Test for Bulk Specific Gravity and Density of Compacted Bituminous Mixtyres Using Paraffin- Coated Specimens

SE-SIS, Loading volume ratio

SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio

Professional Standard - Building Materials, Loading volume ratio

JC/T 995-2006 Zirconia powder with low specific surface area and better sinter ability

AENOR, Loading volume ratio

UNE-ISO 9277:2009 Determination of the specific surface area of solids by gas adsorption using the BET method
UNE-EN 14702-1:2007 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.
UNE-EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)

Indonesia Standards, Loading volume ratio

SNI 13-6661-2002 Specific surface area measurement for mineral powder by nitrogen gas adsorption
SNI 7656-2012 Tata cara pemilihan campuran untuk beton normal, beton berat dan beton massa

YU-JUS, Loading volume ratio

JUS L.N1.046-1991 Ey?raulic fluid pofter. CylJoders. Bore and rod area ratios
JUS H.G8.210-1985 Reagents. Methanct. Determination of free acidcontent (as HCOOH). Volumetric method
JUS H.B8.239-1988 Ethanot for industrial use. Determination of methanol content (methanol contents between 0,10 and 1J50% (V/V)). Visualcolorimetricmethod
JUS H.B8.314-1977 Sodium and potassium silicates for industrial use. Determination of density at 20 °C of products in solution. Method using density hidrometar and method using pyknometer
JUS B.H8.310-1984 Methods of ana/ysis of coal and coke. Determination of moisture in the analysis sample of coal by the direct volumetric method

国家市场监督管理总局、中国国家标准化管理委员会, Loading volume ratio

GB/T 39713-2020 Testing mothed for specific surface area of ceramic powders—BET gas adsorption operation

Professional Standard - Agriculture, Loading volume ratio

GB 2922-1982 Test method for specific surface area of chromatographic carrier for chemical reagents

CZ-CSN, Loading volume ratio

CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities
CSN ISO 7033:1993 Fine and coarse aggregates for concrete. Determination of the particle mass-per-volume and water absorption. Pyknometer method

PL-PKN, Loading volume ratio

PN M73208-1987 Hydraulic fluid power Cylinders φ values for piston working area ratios
PN E04415-1986 Method for determining the comparative and the proof tracking indices of solid insulating materia?s under moist conditions

US-FCR, Loading volume ratio

FCR COE SL-96-15 REPORT 2-1996 WORKABLITY OF MASS CONCRETE REPORT 2, SUPPLEMENTAL PROPORTIONING PARAMETERS

(U.S.) Ford Automotive Standards, Loading volume ratio

FORD FLTM BP 010-1-2001 DETERMINATION OF PERCENT VOLUME CHANGE IN BUNA "N" RUBBER AFTER OIL IMMERSION
FORD FLTM BP 010-01-2001 DETERMINATION OF PERCENT VOLUME CHANGE IN BUNA"N" RUBBER AFTER OIL IMMERSION

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Loading volume ratio

ASHRAE 4406-2000 Computer Analysis and Comparison of Experimental Data for Moisture Accumulation in Concrete Masonry Walls
ASHRAE MN-00-1-3-2000 Computer Analysis and Comparison of Experimental Data for Moisture Accumulation in Concrete Masonry Walls (See Technical Paper 4406@ p.347)

GOSTR, Loading volume ratio

GOST R 57844-2017 Composites. Determination of density by volumetric displacement - skeleton density by gas pycnometry
PNST 253-2017 Russian system of quality. Comparative testing of bed-clothes

Professional Standard - Railway, Loading volume ratio

TB/T 1670.4-1985 No. 15 coupler body upper traction table model

未注明发布机构, Loading volume ratio

BS EN 772-9:1998(2005) Methods of test for masonry units — Part 9 : Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
BS EN 772-2:1998(2006) Methods of test for masonry units — Part 2 : Determination of percentage area of voids in masonry units (by paper indentation)

RU-GOST R, Loading volume ratio

GOST 28947-1991 Glass Hydrometers. Conventional value for tne thermal cubic expasion coefficient (for use in tne preparation of measurement table for liquids)
GOST 5862-1979 Ceramic insulators and covers for voltage over 1000 V. General specifications
GOST R ISO 21687-2014 Carbonaceous materials for the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
GOST R 8.667-2009 State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion, specific energy of combustion and volumetric energy of combustion (combustion calorimeters)

European Committee for Standardization (CEN), Loading volume ratio

EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
FprEN 14583-2021 Workplace exposure - Volumetric bioaerosol samplers - General requirements and evaluation of performance
EN 772-9:1998 Methods of test for masonry units?Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling Incorporates Amendment A1: February 2005
EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
EN 12697-6:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
EN 12919:1999 Workplace Atmoshperes - Pumps for the Sampling of Chemical Agents with a Volume Flow Rate of over 5 l/min - Requirements and Test Methods
EN ISO 3727:1995 Butter - Determination of Water, Solids-not-Fat and Fat Contents on the Test Portion (Reference Method) (ISO 3727 : 1977)

NL-NEN, Loading volume ratio

NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density
NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density

Standard Association of Australia （SAA）, Loading volume ratio

AS 2891.9.1:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Waxing procedure
AS/NZS 2891.8:2014
AS/NZS 1301.426S:2015 Methods of test for pulp and paper, Method 426S: Paper and board — Determination of thickness, density and specific volume
AS 1141.14:1995 Methods for sampling and testing aggregates Method 14: Particle shape, by proportional calliper
AS 1038.21.1.2:2002(R2013)
AS 1038.21.1.2:2002 Coal and coke - Analysis and testing - Higher rank coal and coke - Relative density - Analysis sample/volumetric method
AS 4276.23:2016 Water microbiology, Method 23: Soils, sediments, sludges, slurries and bio-solids — Procedures for sample preparation

Society of Automotive Engineers (SAE), Loading volume ratio

SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT

PT-IPQ, Loading volume ratio

E 209-1967
NP 1014-1987
NP EN 772-2-2001 Methods of test for masonry units Part 2:Determination of percentage area of voids in aggregate concrete masonry units(by paper indentation)

IT-UNI, Loading volume ratio

GM North America, Loading volume ratio

GM GM9529P-1993 Vertical Rise Method of Determining Volume Change of Sealers Replaced by GM9764P

BE-NBN, Loading volume ratio

NBN I-1008-1969
NBN T 03-251-1980 Liquid chlorine for industrial use - Method of sampling (for deter-mining only the volumetric chlorine content)
NBN-EN 22157-1992 Dentistry. Dental rotary instruments. Nominal sizes and designation (ISO 2157:1984)
NBN-EN 25858-1993

FI-SFS, Loading volume ratio

SFS 2740 S-1979 Above ground vertical,cylindrical steel tank for storage of flammable liquids.Volume>500m3.Requirements for material and design
SFS 2737 S-1979 Above ground vertical,cylindrical steel tank for storage of flammable liquids.Volum≤ 500 m3 .Requirements for material and design
SFS 2737-1974
SFS 2740-1975

RO-ASRO, Loading volume ratio

STAS 13072-1992 Determination of pores volume having the radius of 0 ... 300 A by adsorbtion of nitrogen on porous solids
STAS SR 13237-1994 Building physics. Heat engineering. Determination of volume percentage of open and closed cells of rigid materials.

ACI - American Concrete Institute, Loading volume ratio

ACI 211.1-1991 Standard Practice for Selecting Proportions for Normal@ Heavyweight@ and Mass Concrete

United States Navy, Loading volume ratio

NAVY MIL-M-2082 C VALID NOTICE 1-1992 METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE
NAVY MIL-M-2082 C-1984 METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE

Group Standards of the People's Republic of China, Loading volume ratio

T/CPCIF 0140-2021 Catalyst carrier— Determination of surface area and pore volume for quasi-thin-water aluminit— Nitrogen adsorption method

API - American Petroleum Institute, Loading volume ratio

API MPMS 11.1 VOL XIII-1982 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume XIII Table 5D-Generalized Lubricating Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6D-Generalized Lubricating Oils Correction of Volu
API MPMS 11.1 VOL II-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume II Table 5B - Generalized Products Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6B - Generalized Products Correction of Volume to 60 Degre
API MPMS 17.4 SPANISH-1994 Manual de Estándares de Medición del Petróleo Capítulo 17 Mediciones Marítimas Sección 4 Método para Cuantificación de Volúmenes Peque?os en Buques. (OBQ/ROB)

WRC - Welding Research Council, Loading volume ratio

BULLETIN 351-1990 AN ANALYTICAL COMPARISON OF SHORT CRACK AND DEEP CRACK CTOD FRACTURE SPECIMENS OF AN A36 STEEL ; THE EFFECTS OF CRACK DEPTH ON ELASTIC-PLASTIC CTOD FRACTURE TOUGHNESS; A COMPARISON OF THE J-INTEGRAL A

Hebei Provincial Standard of the People's Republic of China, Loading volume ratio

DB13/T 2768.4-2018 Graphene powder material detection method part 4: specific surface area, pore volume and pore diameter BET method

ES-AENOR, Loading volume ratio

UNE 55-818-1985

中华人民共和国国家卫生和计划生育委员会, Loading volume ratio

GB/T 11713-1989 Standard methods of analyzing low specific gamma radioactivity samples by semiconductor gamma spectrometers

National Aeronautics and Space Administration (NASA), Loading volume ratio

NASA-TN-D-6098-1971 A Comparison of Aircraft and Ground Vehicle Stopping Performance on Dry, Wet, Flooded, Slush-, Snow-, and Ice-Covered Runways

Institute of Electrical and Electronics Engineers (IEEE), Loading volume ratio

SMPTE ST 2022-5:2012 ST 2022-5:2012 - SMPTE Standard - Forward Error Correction for High Bit Rate Media Transport Over IP Networks
ST 2022-5:2012 ST 2022-5:2012 - SMPTE Standard - Forward Error Correction for High Bit Rate Media Transport Over IP Networks
SMPTE ST 2110-22:2022 ST 2110-22:2022 - SMPTE Standard - Professional Media Over Managed IP Networks: Constant Bit-Rate Compressed Video
SMPTE ST 2110-22:2019 ST 2110-22:2019 - SMPTE Standard - Professional Media Over Managed IP Networks: Constant Bit-Rate Compressed Video

Professional Standard - Chemical Industry, Loading volume ratio

HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

AT-ON, Loading volume ratio

ONORM S 2118-1-2001 Sample taking and sample preparation of solid wastes for the determination of the upper calorific value - Determination of the upper calorific value (Ho) of mechanical-biological pretreated wastes and similar materials
ONORM S 1407-1976 Textile floor coverings; determination of surface pile density and pile fibre volume ratio of pile carpets

American Petroleum Institute (API), Loading volume ratio

API RP 87-2007(2017) Recommended Practice for Field Analysis of Crude Oil Samples Containing from Two to Fifty Percent Water by Volume

CEN - European Committee for Standardization, Loading volume ratio

EN 12697-6:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens (Incorporates Amendment A1: 2007)

American Railway Engineering and Maintenance-of-Way Association (AREMA), Loading volume ratio

AREMA CH 3-8-1995 Methods of Testing Properties@ Volume@ Penetration@ and Quantity of Preservatives@ and of Measuring and Sampling Creosote

ZA-SANS, Loading volume ratio

SANS 2819:1980 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion

SG-SPRING SG, Loading volume ratio

SS 73 Pt.21-1992 Methods for sampling and testing of mineral aggregates,sand and fillers Part 21: Methods for determination of soundness