ZH
RU
ES

tableting method

tableting method, Total:497 items.

In the international standard classification, tableting method involves: Protection against dangerous goods, Integrated circuits. Microelectronics, Rubber, Aerospace electric equipment and systems, Resistors, Seals, glands, Cinematography, Semiconductor devices, Fluid power systems, Adhesives, Pipeline components and pipelines, Road vehicle systems, Electrical engineering in general, Non-destructive testing, Hydraulic fluids, Electronic tubes, Reinforced plastics, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Ferrous metals, Rubber and plastics products, Analytical chemistry, Glass, Photography, Non-textile floor coverings, Transformers. Reactors, Vocabularies, Protection of and in buildings, Cases. Boxes. Crates, Burners. Boilers, Earthworks. Excavations. Foundation construction. Underground works, Pumps, Packaging materials and accessories, Electromagnetic compatibility (EMC), Construction materials, Inorganic chemicals, Power transmission and distribution networks, Medical sciences and health care facilities in general, Powder metallurgy, Agricultural machines, implements and equipment, Birth control. Mechanical contraceptives, IT terminal and other peripheral equipment, Animal feeding stuffs, Testing of metals, Plastics, Cellular materials, Acoustics and acoustic measurements, Wood-based panels, Structures of buildings, Iron and steel products, Ventilators. Fans. Air-conditioners, Services, Lubricants, industrial oils and related products, Products of the textile industry, Piezoelectric and dielectric devices, Electrical wires and cables, Ceramics, Electronic components in general, Insulating materials, Water quality, Refractories, Farming and forestry, Internal combustion engines for road vehicles, Audio, video and audiovisual engineering, Paint ingredients, Geology. Meteorology. Hydrology, Semiconducting materials, Metalliferous minerals, Kitchen equipment, Food products in general, Products of the chemical industry, Character sets and information coding, Fruits. Vegetables, Optoelectronics. Laser equipment, Air quality, Internal combustion engines, Electricity. Magnetism. Electrical and magnetic measurements, Graphic technology.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, tableting method

GB/T 21579-2008 Dangerous goods.Test method of time/pressure
GB/T 14314-1993 Projector usage of 16 mm motion-picture films for direct front projection-Specifications
GB/T 1684-1985 Vulcanized rubber--Testing short time static compression
GB/T 12622-1990 Test method for compressibility and recovery of gaskets for pipe flanges
GB/T 5351-1985 Test method for short-time hydraulic failure pressure of fiber-reinforced thermosetting plastic pipe
GB/T 15560-1995 Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids
GB/T 5351-2005 Fiber-reinforced thermosetting plastic composites pipe-Determination of short-time hydraulic failure pressure
GB/T 30709-2014 Standard test method for compressibility and recovery of laminated composite gasket materials
GB/T 12622-2008 Standard test method for compressibility and recovery of gaskets for pipe flanges
GB/T 22307-2008 Standard test method for compressive strength of gasket at elevated temperatures
GB/T 24179-2009(英文版) Metallic materials—Residual stress determination—The indentation straingage method
GB/T 4620-1984 Spiral wound gaskets test method of hydraulic pressure sealing characteristics
GB/T 1038-2000 Plastics-Film and sheeting-Determination of gas transmission-Differential-pressure method
GB/T 22311-2008 Road vehicles.Brake linings.Compressive strain test method
GB/T 30710-2014 Standard test method for creep relaxation of laminated composite gasket materials
GB/T 20671.2-2006 Classification system and test methods for nonmetallic gasket materials-Part2:Standard test method for compressibility and recovery of gasket materials
GB/T 18945-2003 Polymeric materials,cellular flexibl--Method of assessment of air flow value at constant pressure-drop
GB/T 1038.2-2022 Plastics—Film and sheeting—Determination of gas-transmission rate—Part 2:Equal-pressure methods
GB/T 1038.1-2022 Plastics—Film and sheeting—Determination of gas-transmission rate—Part 1:Differential-pressure methods
GB/T 2414.1-1998 Test methods for the properties of piezoelectric ceramics. Radial extension vibration mode for disk
GB/T 3389.5-1995 Test methods for the properties of piezoelectric ceramics--Thickness extension vibration mode for disk
GB/T 28266-2012 Non-destructive testing of pressure equipment.Qualification of radiographic film digitization systems
GB/T 3389.6-1997 Test methods for properties of piezoelectric ceramics. Thickness-shear vibration mode for rectangular plate
GB/T 43019.5-2023 Determination of water vapor transmission rate of plastic films and sheets Part 5: Pressure sensor method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, tableting method

GB/T 33922-2017 Wafer level test methods for MEMS piezoresistive pressure-sensitive die performances
GB/T 33208-2016 Non-destructive testing—Practice for the blades on-line monitoring based on tip-timing theory

Professional Standard - Machinery, tableting method

JB/T 7040-1993 Test methods for hydraulic vane pumps
JB/T 6239.5-1992 General test method for industrial automation instrumentation power transient overvoltage effect
JB/T 8543.1-1997 Non-destructive testing for parts of pump - Radiographic testing techniques for pressure steel castings of pump and classification of negative plates

Group Standards of the People's Republic of China, tableting method

T/CIE 134-2022 Test method for data retention time of magnetic random access memory chip
T/CPSS 1008-2020 Voltage Dip and Short Interruption Immunity Testing Method for Low Voltage Electrical Equipment
T/CEC 441-2021 110 (66) kV ~ 500kV AC cable withstand voltage test and simultaneous distributed partial discharge detection method
T/GMES 004-2018 Determination of various components in chromite by X-ray fluorescence spectrometry (powder compression)
T/NAIA 0214-2023 Determination of Major Elements in Coal Gangue by Powder Compression-X-ray Fluorescence Spectrometry
T/CGWSTC 001-2022 Determination of various components in ceramic raw materials X-ray fluorescence spectrometry (powder compression)
T/NAIA 0128-2022 Rapid Determination of Aluminum Hydroxide Determination of Element Content by X-ray Fluorescence Spectroscopic Analysis (Tablet)
T/CAAMTB 20-2020 Technical requirements and bench test method for brake lining wear alarm device of pneumatic drum brake
T/KJFX 001-2021 Simultaneous rapid determination of sulfonamides, chloramphenicol and nitrofuran metabolite residues in livestock and poultry meat by enzyme-linked immunosorbent microarray biochip method
T/KJFX 002-2021 Simultaneous rapid determination of quinolones, tetracyclines, thiamphenicol and florfenicol residues in livestock and poultry meat by immunoassay microarray biochip method

RU-GOST R, tableting method

GOST 265-1977 Rubber. Methods of short static compression tests
GOST 27648-1988 Veriable resistors. Low voltage method of testing of moveable contact intermediate resistance
GOST 18986.21-1978 Reference diodes and stabistors. Method for measuring time drift of working voltage
GOST ISO 6310-2014 Brake linings. Compressive strain test methods
GOST 21011.5-1978 High-voltage kenotrons. Methods of measurement of cathode heatting time and readiness time controlling
GOST R ISO 6310-1993 Road vehicles. Brake linings. Compressibility. Test procedure
GOST R ISO 6310-2005 Road vehicles. Brake linings. Compressive strain test method
GOST 21023-1975 Power transformers. Methods of measuring partial discharge characteristics during power frequency voltage testing
GOST 17245-1979 Soils. Method of laboratory determination of temporary resistance for single-exial compression
GOST 29012-1991 Powder metallurgy. Method of determination of compacts dimensional changes after compacting pressure relief and at the time of sintering
GOST 23089.14-1988 Integrated microcircuits. Methods for measuring delay time of the switching on/off the voltage comparators
GOST 16783-2017 Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop
GOST 18986.20-1977 Semiconductor diodes. Reference zener diodes. Method for measuring warm up time
GOST 9625-1987 Laminated glued wood. Method for determination of strength and elasticity module in static bending
GOST 22091.12-1984 X-ray devices. The methods of measuring of currents and electrode voltage per pulse
GOST 27034-1986 Sintered hard metals. Method of compression and yield strength determination
GOST 9625-2013 Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
GOST R 55597-2013 High pressure vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openinys in shells and heads external pressure. Strength calculation under external static loads on the nozzle
GOST 26605-1993 Polymeric materials cellular flexible. Determination of stress-strain characteristics in compression and compression stress
GOST 18986.9-1973 Semiconductor diodes. Method for measuring pulse direct voltage and forword recovery time
GOST 23089.6-1983 Integrated circuits. Method of measuring the operational amplifiers output voltage settling time
GOST 30804.4.11-2013 Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods
GOST R 50730.5-1995 Microwave ferrite devices. Methods of measurement of voltage standing wave ratio (VSWR) and maximum VSWR at high power level
GOST 33784-2016 Sealing materials and gaskets from them. Method for determination of compressibility and recoverability
GOST 23089.10-1983 Integrated circuits. Method of measuring the operational amplifiers output voltage maximum build-up rate and time
GOST 31856-2012 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners. General technical requirements and test methods
GOST R 51847-2009 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners. General technical requirements and test methods
GOST R 51847-2001 Domestic gas running water heaters, types A and C. General specifications
GOST 18604.27-1986 Power high-voltage bipolar transistors. Collector-base (emitter-base) breakdown voltage measurement at emitter (collector) cut-off current
GOST EN 1296-2012 Roofing and hydraulic-insulating flexible bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Method of artificial thermal ageing
GOST 24613.14-1977 Optoelectronic integrated microcircuits. Method for measuring consumption currents of low and high levels of logic signal switches

British Standards Institution (BSI), tableting method

BS EN 2591-428:2002 Elements of electrical and optical connection - Test methods - Sinusoidal vibrations with passage of current for crimped terminal lugs
BS 6662:1985 Guide to methods of measurement of short duration transients on low voltage power and signal lines
BS ISO/IEC 23385:2022 Information technology. Office equipment. Method for measuring single photo printing time for digital printing devices
17/30345416 DC BS ISO 2100-428. Aerospace elements of electrical and optical connection. Test methods. Part 428. Sinusoidal vibrations with passage of current for crimped terminal lugs
BS EN ISO 14632:1999 Extruded sheets of polyethylene (PE-HD) - Requirements and test methods
BS ISO 15105-2:2003 Plastics - Film and sheeting - Determination of gas-transmission rate - Equal-pressure method
BS EN 302-6:2004 Adhesives for load-bearing timber structures - Test methods - Determination of the conventional pressing time
BS EN ISO 15527:2022 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
21/30379726 DC BS ISO/IEC 23385. Information technology. Office equipment. Method for measuring single photo printing time for digital printing devices
BS EN ISO 14631:1999 Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods
BS EN 13409:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
BS EN 302-6:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the minimum pressing time under referenced conditions
21/30429475 DC BS EN ISO 15527. Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
BS EN 61094-5:2002 Measurement microphones - Methods for pressure calibration of working standard microphones by comparison
BS EN ISO 3503:2015 Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
BS EN 713:1995 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
BS 7504:1995 Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
BS EN 15416-5:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time
BS EN 302-6:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Determination of the minimum pressing time under referenced conditions
BS EN ISO 15015:2011 Plastics. Extruded sheets of impact-modified acrylonitrilestyrene copolymers (ABS, AEPDS and ASA). Requirements and test methods
BS ISO 12926:2012 Aluminium fluoride for industrial use. Determination of trace elements. Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
BS EN 803:1995 Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust
BS ISO 6162-2:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
BS EN 2591-219:2002 Elements of electrical and optical connection - Test methods - Voltage strength for insulated terminal lugs and in-line splices
BS EN 50332-2:2004 Sound system equipment - Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations - Matching of sets with headphones if either or both are offered separately
BS EN 50332-2:2003 Sound system equipment:Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations - Part 2:Matching of sets with headphones if either or both are offered separately
BS ISO 4443:2022 Cryolite primarily used for the production of aluminium. Determination of elements. Wavelength-dispersive X-ray fluorescence spectrometric method using pressed powder tablets
21/30439586 DC BS EN 302-6. Adhesives for load-bearing timber structures. Test methods. Part 6. Determination of the minimum pressing time under referenced conditions
17/30345209 DC BS ISO 2100-219. Aerospace elements of electrical and optical connection. Test methods. Part 219. Voltage strength for insulated terminal lugs and in-line splices - Part 219: Voltage strength for insulated terminal lugs and in-line splices
BS ISO 12926:2013 Aluminium fluoride for industrial use. Determination of trace elements. Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
BS ISO 8178-10:2003 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS EN 2591-217:2002 Elements of electrical and optical connection - Test methods - Voltage drop under specified current for terminal lugs and in-line splices
BS ISO/IEC 29102:2015 Information technology. Office equipment. Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components
BS ISO/IEC 29102:2011 Information technology. Office equipment. Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components
20/30420126 DC BS ISO 4443. Cryolite primarily used for the production of aluminium. Determination of elements. Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
BS ISO 22234:2006 Cinematography - Relative and absolute sound pressure levels for motion-picture multi-channel sound systems - Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio
BS ISO 22234:2005 Cinematography. Relative and absolute sound pressure levels for motion-picture multi-channel sound systems. Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio

Indonesia Standards, tableting method

SNI 05-4079-1996 Test method for compressed asbestos gaskets
SNI 7518-2009 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2
SNI 7695-2011
SNI ISO 16526-2:2013

Defense Logistics Agency, tableting method

DLA DSCC-VID-V62/12624-2012 MICROCIRCUIT, LINEAR, LOW VOLTAGE 1:10 LVPECL WITH SELECTABLE INPUT CLOCK DRIVER, MONOLITHIC SILICON
DLA SMD-5962-07230-2009 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, 3.3-V HIGH PERFORMANCE CLOCK SYNCHRONIZER AND JITTER CLEANER, MONOLITHIC SILICON
DLA SMD-5962-06233 REV B-2013 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, LOW VOLTAGE CMOS, MINIMUM SKEW ONE-TO-EIGHT CLOCK DRIVER, LVTTL COMPATIBLE INPUTS AND OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-06233 REV A-2007 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, LOW VOLTAGE CMOS, MINIMUM SKEW ONE-TO-EIGHT CLOCK DRIVER, LVTTL COMPATIBLE INPUTS AND OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-95667 REV B-2012 MICROCIRCUIT, LINEAR, DUAL SERIAL INPUT, VOLTAGE OUTPUT, 12-BIT MULTIPLYING DIGITAL-TO-ANALOG CONVERTER, MONOLITHIC SILICON
DLA SMD-5962-92229 REV B-1996 MICROCIRCUIT, DIGITAL, FAST CMOS, 9-BIT BUS INTERFACE D REGISTERS WITH CLOCK ENABLE, ASYNCHRONOUS CLEAR, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON
DLA SMD-5962-92230 REV A-1996 MICROCIRCUIT, DIGITAL, FAST CMOS, 8 BIT, BUS INTERFACE, D REGISTERS WITH CLOCK ENABLE, ASYNCHRONOUS CLEAR, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON
DLA SMD-5962-95761 REV A-2007 MICROCIRCUIT, DIGITAL, FAST CMOS, BUFFER/CLOCK DRIVER WITH NONINVERTING THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON

PL-PKN, tableting method

PN T01504-60-1987 Diodes Measuring methods Instant and peak forward recovery voltages Ufr, Ufrm and forward recovery time tfr

Compressed Gas Association (U.S.), tableting method

CGA C-11-2006 RECOMMENDED PRACTICES FOR INSPECTION OF INSPECTION OF COMPRESSED GAS CYLINDERS AT TIME OF MANUFACTURE
CGA P-40-2011 Calculation method for the analysis and prevention of overpressure during refilling of cryogenic tanks tieh rupture disk(s)
CGA P-40-2017 CALCULATION METHOD FOR THE ANALYSIS AND PREVENTION OF OVERPRESSURE DURING REFILLING OF CRYOGENIC TANKS WITH RUPTURE DISK(S)

Professional Standard - Chemical Industry, tableting method

HG/T 3843-2008 Vulcanized rubber.Test method for short time static compression
HG/T 3843-2006 Test method for short-term static compression of vulcanized rubber
HG/T 3801-2005 Testing and measuring methods for twin-screw extruder of rubber

FI-SFS, tableting method

SFS B.8.54-1959 Valurautaiset putki-yhteet Laippasupistuspuki(FFR-kappale)

工业和信息化部, tableting method

JC/T 2052-2020 Compressed non-asbestos fibre gasket materials
YB/T 6012-2022 Determination of multi-element content of blast furnace slag by X-ray fluorescence spectrometry (powder tabletting method)
QC/T 1153-2021 Ultrasonic piezoelectric ceramic disc method for axial force testing of automobile fastening connection bolts
YS/T 581.15-2012 Methods for chemical analysis and determination of physical properties of aluminum fluoride Part 15: Determination of elemental content by X-ray fluorescence spectrometry (tablet pressing) method

Japanese Industrial Standards Committee (JISC), tableting method

JIS Z 0237:2022 Testing methods of pressure-sensitive adhesive tapes and sheets
JIS D 4413:2005 Automotive parts -- Brake linings and brake pads -- Compressive strain test method

Professional Standard - Building Materials, tableting method

JC/T 2052-2011 Compressed non-asbestos fibre gasket materials

国家市场监督管理总局、中国国家标准化管理委员会, tableting method

GB/T 39269-2020 Voltage dip and short interruption—Immunity testing method for low voltage equipment
GB/T 39227-2020 Immunity time testing method under voltage dip for sensitive process rated less than 1000 V

Professional Standard - Petrochemical Industry, tableting method

SH/T 0787-2006 Standard test method for indicating wear characteristics of petroleum hydraulic fluids in a high pressure constant volume vane pump
SH/T 0307-1992 Determination of wear characteristics of petroleum-based hydraulic oil (vane pump method)
NB/SH/T 0830-2010 Standard test method for indicating wear characteristics of non-petroleum and petroleum hydraulic fluids in a constant volume vane pump

American National Standards Institute （ANSI), tableting method

ANSI/ASTM D1599:1999 Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ANSI/ASA S12.68-2007 Methods of Estimating Effective A-Weighted Sound Pressure Levels when Hearing Protectors Are Worn
ANSI/ASTM F948:1994 Test Method for Time-to-Failure of Plastic Piping Systems and Components under Constant Internal Pressure with Flow
ASTM D7361-07(2023) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ANSI/ISO/IEC 11544:1993 Information technology - Coded representation of picture and audio information - Progressive bi-level image compression Adopted by INCITS

Professional Standard - Military and Civilian Products, tableting method

WJ/Z 201-1984 Piezoelectric fuze action time (piezoelectric mechanism-electric detonator) simulation test method

Professional Standard - Electron, tableting method

SJ 443-1973 Method of measurement for cathode heating time of high-voltage rectifier tubes
SJ 444-1973 Methods of measurement for anode current and anode current on underheated condition of high-voltage rectifier tubes
SJ 365-1973 Measurement of cathode current variation ratio of reflex klystrons as heater current changes
SJ/Z 9032-1987 guidelines - measuring method of short duration of transient signal on low-voltage power and signal cables

German Institute for Standardization, tableting method

DIN 52913:2002-04 Testing of static gaskets for flange connections - Compression creep testing of gaskets made from sheets
DIN EN ISO 2556:2001-01 Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974); German version EN ISO 2556:2000
DIN 86071:1992 Full face gaskets for flanges; nominal pressures 6, 10, 16, 25
DIN 4235-3:1978 Compacting of Concrete by Vibrating; Compacting by External Vibrators during the Manufacture of Precast Components
DIN 2696:1972 Lenticular gaskets and lenticular seals for ND 64 to ND 400 flanged connections
DIN EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004); German version EN ISO 20763:2004
DIN EN ISO 20763:2004-10 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004); German version EN ISO 20763:2004
DIN EN 480-2:2006 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time; English version of DIN EN 480-2:2006-11
DIN 51389-2:1982 Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; method A foranhydrous hydraulic fluids
DIN EN 13409:2002 Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time; German version EN 13409:2002
DIN EN 61094-5:2003 Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001); German version EN 61094-5:2001
DIN EN 60893-2:2005 Insulating materials - Industrial laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:2003); German version EN 60893-2:2004
DIN EN 302-6:2023-05 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions; German version EN 302-6:2023
DIN EN ISO 15015:2008 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2007); English version of DIN EN ISO 15015:2008-01
DIN EN ISO 16526-2:2020-09 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011); German version EN ISO 16526-2:2020
DIN EN 15416-5:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time; English version of DIN EN 15416-5:2006-10
DIN EN 804:1994 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994
DIN EN 803:1994 Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994
DIN 15546:1981 Film 35 mm; image produced by camera aperture and projected image area, anamorphotic method, lateral compression ratio 2:1 and aspect ratio 2,35:1
DIN EN 302-6:2013 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions; German version EN 302-6:2013
DIN EN 50332-2:2004 Sound system equipment: Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations - Part 2: Matching of sets with headphones if either or both are offered separately;
DIN EN 2591-219:2003 Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices; German and English version EN 2591-219:2002

American Society for Testing and Materials (ASTM), tableting method

ASTM D3532-99(2009) Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
ASTM F1914-05 Standard Test Method for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM D1229-03(2008) Standard Test Method for Rubber Property-Compression Set at Low Temperatures
ASTM F1574-03a(2009) Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM F2837-11(2018) Standard Test Method for Hot Compression Properties of Gasket Materials
ASTM D3813/D3813M-98(2003) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D3813/D3813M-98 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D1229-03 Standard Test Method for Rubber Property8212;Compression Set at Low Temperatures
ASTM D1598-02(2009) Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D1598-21 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D1598-15 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D1598-15a Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D7854-13 Standard Test Method for Carbon Black-Void Volume at Mean Pressure
ASTM D1598-23 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM F806-99a(2003) Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM F806-99a(2017) Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM D1599-99(2005) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D1598-97 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D1599-99 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D1599-99e1 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D1598-02(2008) Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D1598-02 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D1599-18 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM F1574-03a(2017) Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM D2664-95a Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
ASTM C918-97e1 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C918/C918M-20 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM F36-99 Standard Test Method for Compressibility and Recovery of Gasket Materials
ASTM F36-99(2003) Standard Test Method for Compressibility and Recovery of Gasket Materials
ASTM F36-15(2021) Standard Test Method for Compressibility and Recovery of Gasket Materials
ASTM F806-99a(2009) Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM D2664-04 Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
ASTM E1554-94 Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM F2716-08 Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
ASTM D6973-08 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM D6973-14(2019) Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM D6973-14(2019)e1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM D5483-21 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D6186-08(2013) Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM D7406-20 Standard Test Method for Time-Dependent Compressive Deformation Under Constant Pressure for Geosynthetic Drainage Products
ASTM D5885-97 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
ASTM D6186-19 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM D5483-02e1 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D5483-95 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D6186-98 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM D6186-98(2003)e1 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM D5483-05(2015) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D5483-05(2010) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D6186-08 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM D669-92(2002) Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
ASTM D7247-07 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D7247-07a Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM C563-03 Standard Test Method for Optimum SO₃ in Hydraulic Cement Using 24-h Compressive Strength
ASTM D7247-07ae1 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D1599-14e1 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM C1291-16 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Monolithic Advanced Ceramics
ASTM C1291-18 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
ASTM D6295/D6295M-98 Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
ASTM D6295/D6295M-98(2019) Standard Test Method for Dispensability of Light–Duty Pressure–Sensitive Film Tape
ASTM D5483-20 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D5483-02 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D1922-03a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-03 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D4680-98 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D4680-98(2004) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D6463-99 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D6463/D6463M-06 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D6463/D6463M-06(2012) Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D6463/D6463M-06(2020) Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D1599-14 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D2582-03 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
ASTM C1291-00a Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM C1291-00 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM C1291-00a(2005) Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM C1291-00a(2010) Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM D4044/D4044M-15 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
ASTM D2860/D2860M-04 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90&176 Angle and Constant Stress
ASTM C563-04 Standard Test Method for Optimum SO₃ in Hydraulic Cement Using 24-h Compressive Strength
ASTM C349-02 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
ASTM C349-08 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
ASTM D1599-99(2011) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D5885/D5885M-20 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
ASTM D5885/D5885M-17 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
ASTM D5885/D5885M-15 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
ASTM F948-94(2001)e1 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM D7406-07 Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
ASTM F948-94(2001) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM F948-94(2006) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM F948-94 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM F948-94(2011) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM D7406-07(2012) Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
ASTM D8279-23 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D5885-06 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
ASTM D5885-04 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
ASTM D5881-20 Standard Practice for (Analytical Procedures) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
ASTM D8279-19 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8279-22 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8279-21 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8279-20a Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8279-20 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8279-21e1 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8279-22a Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM C349-14 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
ASTM D8279-23a Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D5885-06(2012) Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
ASTM D7361-07(2012) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D7361-07 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM F1392-00 Standard Test Method for Determining Net Carrier Density Profiles in Silicon Wafers by Capacitance-Voltage Measurements With a Mercury Probe
ASTM D7043-21 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
ASTM D4680-98(2011) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D4680-98(2017) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D7043-12 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
ASTM D7043-17 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
ASTM D1823-95(2001) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D1823-95 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D4104-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
ASTM D4104-17 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
ASTM D7043-10 Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
ASTM D5824-98(2011) Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM D4680-98(2023) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D669-03 Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
ASTM C1581/C1581M-18 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1581/C1581M-18a Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1581/C1581M-09 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1581/C1581M-16 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM A932/A932M-01(2006) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
ASTM A932/A932M-01(2012) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens

Professional Standard - Energy, tableting method

NB/T 42003-2013 Insulation test method for iron core (punched sheet) of high voltage motor
NB/T 47013.10-2015 Nondestructive testing of pressure equipments .Part 10: Ultrasonic time of flight diffraction technique
NB/T 47013.10-2015 Nondestructive Testing of Pressure Equipment Part 10: Ultrasonic Testing by Diffraction Time-of-Flight
NB/T 47013.10-2010 Nondestructive Testing of Pressure Equipment Part 10: Ultrasonic Testing by Diffraction Time-of-Flight

国家发展和改革委员会, tableting method

HG/T 3801-2006 Detection method of rubber twin-screw extrusion tablet press

Korean Agency for Technology and Standards (KATS), tableting method

KS D 0410-2012 Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
KS C 7616-1992(1997) METHOD OF DETERMINING THE LUMINOUS FLUX VERSUS TIME CHARACTERISTICS AND THE LIGHT OUTPUT OF PHOTOFLASH LAMPS
KS C 7616-1985 METHOD OF DETERMINING THE LUMINOUS FLUX VERSUS TIME CHARACTERISTICS AND THE LIGHT OUTPUT OF PHOTOFLASH LAMPS
KS A ISO 26:2003 Cinematography－Projector usage of 16 mm motion－picture films for direct front projection－Specifications
KS C 0272-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASURMENT TECHNIQUES-VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TEST
KS R ISO 6310:2008 Road vehicles-Brake linings-Compressive strain test method
KS R ISO 6310:2014 Road vehicles — Brake linings — Compressive strain test methods
KS R ISO 6310-2014(2019) Road vehicles — Brake linings — Compressive strain test methods
KS L 5103-1996(2016) Testing method for setting time of hydraulic cement by Gilmour needles
KS D 0411-2012 Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting
KS B ISO 6164:2004 Hydraulic fluid power-Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa
KS M ISO 14631:2007 Extruded sheets of impact－modified polystyrene(PS－I)－Requirements and test methods
KS M ISO 14631-2007(2022) Extruded sheets of impact－modified polystyrene(PS－I)－Requirements and test methods
KS C IEC 60893-2:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 2:Methods of test
KS M ISO 15105-1-2013(2018) Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure method
KS C IEC 61472-2015(2020) Live working — Minimum approach distances for A.C. systems in the voltage range 72.5 kV to 800 kV — A method of calculation
KS M ISO 8780-4:2007 Pigments and extenders－Methods of dispersion for assessment of dispersion characteristics－Part 4：Dispersion using a bead mill
KS F 2483-2009 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
KS L 1601-2006(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature
KS L 1601-2006(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature
KS M ISO 11667:2002 Fibre－reinforced plastics－Moulding compounds and prepregs－Determination of resin, reinforced－fibre and mineral－filler content－Dissolution methods

Taiwan Provincial Standard of the People's Republic of China, tableting method

CNS 7050-1981 Time to Failure of Plastic Pipe Under Constant Internal Pressure
CNS 11486-1986 Method of Test for Edgewise Compressive Strength of Corrugated Fiberboard - Butterfly Form Specimen
CNS 11485-1986 Method of Test for Edgewise Compressive Strength of Corrugated Fiberboard - Rectangle Form Specimen

Military Standard of the People's Republic of China-General Armament Department, tableting method

GJB 736.16-1994 Pyrotechnics Test Method Ignition Pressure-Time Curve Determination
GJB 5309.24-2004 Test methods for pyrotechnics Part 24: Determination of ignition pressure-time curve
GJB 736.16A-2019 Test methods for pyrotechnics Part 16: Determination of ignition pressure-time curve

International Organization for Standardization (ISO), tableting method

ISO 26:1993 Cinematography; projector usage of 16 mm motion-picture films for direct front projection; specifications
ISO 15013:1998 Extruded sheets of polypropylene (PP) - Requirements and test methods
ISO 6310:2009 Road vehicles - Brake linings - Compressive strain test methods
ISO 6310:2001 Road vehicles - Brake linings - Compressive strain test method
ISO 14632:1998 Extruded sheets of polyethylene (PE-HD) - Requirements and test methods
ISO 8009-8:1985 Reusable rubber contraceptive diaphragms; Part 8 : Determination of twisting during compression of coil spring and flat spring diaphragms
ISO/IEC 23385:2022 Information technology — Office equipment — Method for measuring single photo printing time for digital printing devices
ISO 14631:1999 Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods
ISO 15106-5:2015 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 5: Pressure sensor method
ISO 6162:1994 Hydraulic fluid power; four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar); type I metric series and type II inch series
ISO/CD 7039 Metallic materials — Tensile testing — Method for evaluating changes of properties in a high-pressure gaseous environment using a hollow test piece
ISO 15106-6:2015 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 6: Atmospheric pressure ionization mass spectrometer method
ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods
ISO 15015:2007 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods
ISO 22234:2005/CD Amd 1 Cinematography — Relative and absolute sound pressure levels for motion-picture multi-channel sound systems — Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio — Amendment 1
ISO 22234:2005 Cinematography - Relative and absolute sound pressure levels for motion-picture multi-channel sound systems - Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio

BR-ABNT, tableting method

ABNT NBR 7334-2011 Safety glass - Determination of the leaves when subjected to verification and their dimensional tolerances - Test method

Shandong Provincial Standard of the People's Republic of China, tableting method

DB37/T 2369-2022 Technical Regulations for Testing the Compressive Strength of Masonry Mortar by Mortar Sheet Partial Pressure Method
DB37/T 2369-2013 Technical specification for testing the strength of masonry mortar by partial pressure method of mortar sheet

Society of Automotive Engineers (SAE), tableting method

SAE RS-414-2-1954 RS414 A Standard Method of Dimensioning Compressor Blades
SAE ARP575-1959 PROCEDURE AND METHOD EVALUATION OF FILTER PATCH TESTING FOR AIRCRAFT HYDRAULIC PUMPS
SAE AS21004-2002 400 Commonwealth Drive, Warrendale, PA 15096-0001 SHEET 1 OF 3 AS21004 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1 FOR 175°C TOTAL CONDUCTOR TEMPERATURE FSC 5940

ES-AENOR, tableting method

UNE 53-313-1988

International Electrotechnical Commission (IEC), tableting method

IEC TS 60816:1984 Guide on methods of measurement of short duration transients on low-voltage power and signal lines
IEC TR 60816:1984 Guide on methods of measurement of short duration transients on low-voltage power and signal lines
IEC TR2 60816:1984 Guide on methods of measurement of short duration transients on low voltage power and signal lines.
IEC 62047-34:2019 Semiconductor devices - Micro-electromechanical devices - Part 34: Test methods for MEMS piezoresistive pressure-sensitive device on wafer
IEC TS 62607-6-10:2021 Nanomanufacturing - Key control characteristics - Part 6-10: Graphene-based material - Sheet resistance: Terahertz time-domain spectroscopy
IEC 60893-2:2003 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 60893-2:1992 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 2: methods of test

Jilin Provincial Standard of the People's Republic of China, tableting method

DB22/T 3375-2022 Hypertension medication guidance gene detection real-time fluorescence quantitative PCR method

Danish Standards Foundation, tableting method

DS/EN 2591-428:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs
DS/EN ISO 20763:2004 Petroelum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
DS/EN 302-6:2013 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
DS/EN 12544-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
DS/EN 803:1995 Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust
DS/EN 15416-5:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time

Lithuanian Standards Office , tableting method

LST EN 2591-428-2005 Aerospace series - Elements of electrical and optical connection - Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs
LST EN 302-6-2004 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time
LST EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004)
LST EN 12544-2-2001 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
LST EN 803-2002 Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust
LST EN 15416-5-2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time

ES-UNE, tableting method

UNE-EN 2591-428:2002 Aerospace series. Elements of electrical and optical connection. Test methods. Part 428: Sinusoidal vibrations with pasage of current for crimped terminal lugs (Endorsed by AENOR in August of 2002.)
UNE-EN ISO 16526-2:2020 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)

The American Road & Transportation Builders Association, tableting method

AASHTO T 226-1990 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements
AASHTO DIVISION I SEC 10-C Service Load Design Method Allowable Stress Design Interim 1997; Interim 2000(Standard Specifications for Highway Bridges, Div. 1 - Design)
AASHTO TP35-1993 Standard Test Method for Determining the Relative Effectiveness of Penetrating Concrete Sealers by Electrical Resistance 2000 Edition; Interim Edition 4/2001 R(1996)
AASHTO TP8-1994 Standard Test Method for Determining the Fatigue Life of Compacted Hot Mix Asphalt (HMA) Subjected to Repeated Flexural Bending 2000 Edition; Interim Edition 4/2001 R(1996)

Association Francaise de Normalisation, tableting method

NF T54-404*NF EN ISO 14632:2021 Extruded sheets of polyethylene (PE-HD) - Requirements and test methods
NF ISO 1268-8:2004 Plastiques renforcés de fibres - Méthodes de fabrication de plaques d'essai - Partie 8 : moulage par compression des SMC et BMC
NF P98-231-6:1997 Tests relating to pavements. Compaction tests on non bituminous materials. Part 6 : workability time limit determination of granular materials and sand bound with cementitious binders using delayed compaction.
NF EN ISO 20763:2004 Pétrole et produits connexes - Détermination des propriétés anti-usure des fluides hydrauliques - Méthode de la pompe à palettes
NF T70-358:2004 Energetic materials for defense - Physical chemical analyses and properties - Density of plate or grain high explosives - Method hydrostatic scale method
NF T54-408*NF EN ISO 14631:2021 Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods
NF T76-152-6*NF EN 302-6:2013 Adhesives for load-bearing timber structures - Test methods - Part 6: determination of the minimum pressing time under referenced conditions
NF T76-336-5:2006 Adhesives for load bearing timber structures - Test methods - Part 5 : determination of conventional pressing time.
NF T54-141:1984 Plastics. Film and sheeting. Determination of tear resistance. Part 2 : elmendorf method.
NF T54-008*NF EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
NF T31-210-4*NF EN ISO 8780-4:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 4 : dispersion using a bead mill.
NF T54-140:1984 Plastics. Film and sheeting. Determination of tear resistance. Part 1 : trouser tear method.
NF T54-008:1994 Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending.
NF EN 302-6:2023 Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 6 : détermination du temps de pressage minimal dans des conditions de référence
NF P19-126*NF EN 12269-1:2000 "Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the ""beam test"" - Part 1 : short term test"
NF EN ISO 16526-2:2020 Essais non destructifs - Mesurage et évaluation de la tension des tubes radiogènes - Partie 2 : contrôle de la constance selon la méthode du filtre épais
NF E48-055-2:2013 Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 2: flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
NF T54-009:1994 Thermoplastics piping systems. Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings. Test method for leakightness under internal hydrostatic pressure without end thrust.
NF L54-002-141*NF EN 2591-219:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 219 : voltage strength for insulated terminal lugs and in-line splices
NF T76-336-5*NF EN 15416-5:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5 : determination of minimum pressing time under referenced conditions
NF E48-055-1*NF ISO 6162-1:2013 Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 1 : flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127

Standard Association of Australia （SAA）, tableting method

AS 1012.16:1996 Methods of testing concrete - Determination of creep of concrete cylinders in compression
AS 1774.34:2004 Refractories and refractory materials - Physical test methods - Guide to the determination of extrusion pressure and curing time of taphole clay

RO-ASRO, tableting method

STAS SR ISO 8009-8:1996 Reusable rubber contraceptive diaphragms - Part 8: Determina-tion of twisting during compression of coi! spring and flat spnng diaphragms

Aerospace, Security and Defence Industries Association of Europe (ASD), tableting method

ASD-STAN PREN 2591-428-1995 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 428: Sinusoidal Vibrations with Passage of Current for Crimped Terminal Lugs (Edition P 1)
ASD-STAN PREN 2591-B19-1993 Aerospace Series Elements in Electrical and Optical Connection Test Methods Part B19 - Voltage Strength for Lugs and in-Line Splices

BE-NBN, tableting method

NBN G 55-003-1975
NBN EN 713-1994 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending

SE-SIS, tableting method

SIS SS 3136-1987 Pipe flanges - Sealing devices - Metallic spiral wound gaskets - Compression testing

CZ-CSN, tableting method

CSN 46 7092-38-1998 Testing methods for feeding stuffs - Part 38: Determination of granules strength when pressed
CSN 35 8071 Cast.14-1988 Variable resistors. Method of measurement of contact resistance of thc moving contact at low voltage level
CSN 35 0019 Cast.07-1980 Rotating eleotrieal machines. Methods for detormining of tho winding resistance o' a machine during operation at alternat- ing voltage

AENOR, tableting method

UNE 20866:1995 IN GUIDE ON METHODS OF MEASUREMENT OF SHORT DURATION TRANSIENTS ON LOW VOLTAGE POWER AND SIGNAL LINES.
UNE-EN ISO 20763:2005 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004)
UNE-EN 302-6:2013 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
UNE-EN 15416-5:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions

Institute of Electrical and Electronics Engineers (IEEE), tableting method

SMPTE RP 201:2008 RP 201:2008 - SMPTE Recommended Practice - Encoding Film Transfer Information Using Vertical Interval Time Code
IEEE Std C57.110-1998 Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
RP 201:2008 RP 201:2008 - SMPTE Recommended Practice - Encoding Film Transfer Information Using Vertical Interval Time Code
ANSI/IEEE Std C57.110-1986 IEEE Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE PC37.06.1/D6, October 2017 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
IEEE PC37.06.1/D5, April 2017 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
IEEE PC37.06.1/D3, July 2016 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
IEEE P1668/D2, September 2016 IEEE Approved Draft Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
IEEE Std C37.06.1-2017 IEEE Recommended Practice for Preferred Ratings for High-Voltage(>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
C63.4-2000 Interim Standard Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
IEEE Std C57.110-2018 IEEE Recommended Practice for Establishing Liquid Immersed and Dry-Type Power and Distribution Transformer Capability when Supplying Nonsinusoidal Load Currents
IEEE PC57.110/D6, September 2017 IEEE Draft Recommended Practice for Establishing Liquid-Immersed and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE PC57.110/D6.2, March 2018 IEEE Draft Recommended Practice for Establishing Liquid-Immersed and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE PC57.110/D6.1, February 2018 IEEE Draft Recommended Practice for Establishing Liquid-Immersed and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
RP 200:2012 RP 200:2012 - SMPTE Recommended Practice - Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems — Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema
RP 200:2002 RP 200:2002 - SMPTE Recommended Practice - Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems — Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema
IEEE Std 1668-2014 IEEE Trial-Use Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., tableting method

IEEE C57.110-1986 Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE C57.110 ERTA-2002 Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE C57.110-1998 Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE C37.06.1-2017 Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
IEEE C57.110-2008 Recommended Practice for Establishing Liquid-Filled and Dry- Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE C57.110-2018 Recommended Practice for Establishing Liquid Immersed and Dry-Type Power and Distribution Transformer Capability when Supplying Nonsinusoidal Load Currents
IEEE 1668 ERTA-2018 Errata to Recommended Practice for Voltage Sag and Short Interruption Ride- Through Testing for End-Use Electrical Equipment Rated Less than 1000 V

Professional Standard - Railway, tableting method

TB/T 2769.7-1997 Heavy-duty rail car test method air compressor blowing time and exhaust air volume test

GM Daewoo, tableting method

GMKOREA EDS-T-7665-2011 Test Method for Determining Compressibility and Recovery of Gasket Materials

Professional Standard - Light Industry, tableting method

QB/T 2072.10-1994 Flat welding flange gaskets for general parts of sugar machinery pressure vessels

Jiangsu Provincial Standard of the People's Republic of China, tableting method

DB32/T 4486-2023 Gasket coefficient (m) and specific pressure (y) test method based on leakage rate

GOSTR, tableting method

GOST 26605-2017 Cellular flexible polymeric materials. Determination of stress-strain characteristics in compression and compression stress

YU-JUS, tableting method

JUS M.E2.066-1997 Boiler plants - Temporaiy operation oj a boiler plant with a steam generator of the group IV with reduce? working pressure without supervision

KR-KS, tableting method

KS M ISO 20763-2011 Petroleum and related products－Determination of anti-wear properties of hydraulic fluids－Vane pump method

未注明发布机构, tableting method

BS EN ISO 20763:2004(2006) Petroleum and related products — Determination of anti - wear properties of hydraulic fluids — Vane pump method
DIN EN 302-6:2004 Adhesives for load-bearing wooden components – Test methods – Part 6: Determination of the minimum pressing time
BS ISO 21618:2019 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method

Professional Standard - Commodity Inspection, tableting method

SN/T 3054.1-2011 Test method of explosivity for import solid waste materials.Part 1:Time/pressure test
SN/T 1731.12-2014 Safety performame test for pyrotechnic composition used for export fireworks and firecracker.Part 12:Time-Pressure test

VE-FONDONORMA, tableting method

European Committee for Standardization (CEN), tableting method

EN 13409:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
EN 804:1994 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
EN 713:1993 Plastics Piping Systems - Mechanical Joints Between Fittings and Polyolefin Pressure Pipes - Test Method for Leaktightness Under Internal Pressure of Assemblies Subjected to Bending
EN 302-6:2013 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
prEN 302-6-2021 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
EN 302-6:2023 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
EN 803:1994 Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust
EN ISO 8780-4:1995 Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 4: Dispersion Using a Bead Mill (ISO 8780-4: 1990)
EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
EN 15416-5:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time
EN 2591-219:2002 Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices

CEN - European Committee for Standardization, tableting method

EN 302-6:2004 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time
EN ISO 15015:2007 Plastics - Extruded sheets of impact-modified acrylonitrilestyrene copolymers (ABS@ AEPDS and ASA) - Requirements and test methods

NO-SN, tableting method

NS 157-1984 Gaskets for flanges with raised face and flanges with flat face - Dimensions and quality requirements - Nominal pressure PN 2,5 to PN 40

National Aeronautics and Space Administration (NASA), tableting method

NASA NACA-RM-L54I13-1954 Comparison of low-speed rotor and cascade performance for medium-camber NACA 65-(C(sub lo)A(sub 10) 10 compressor-blade sections over a wide range of rotor blade-setting angles at solidities. of 1.0 and 0.5
NASA NACA-TN-3911-1957 A method for predicting lift increments due to flap deflection at low angles of attack in incompressible flow
NASA NACA-TN-2399-1951 Applicability of the hypersonic similarity rule to pressure distributions which include the effects of rotation for bodies of revolution at zero angle of attack

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, tableting method

JEDEC JESD202-2006 Method for Characterizing the Electromigration Failure Time Distribution of Interconnects Under Constant-Current and Temperature Stress

Canadian General Standards Board （CGSB), tableting method

CGSB 148.1 NO.4-94-CAN/CGSB-1994 Methods of Testing Geosynthetics Geotextiles - Normal Water Permeability Under No Compressive Load
CGSB 148.1 NO.6.1-93-CAN/CGSB-1993 Methods of Testing Geotextiles and Geomembranes Bursting Strength of Geotextiles Under No Compressive Load

Professional Standard - Aquaculture, tableting method

SC/T 7202.1-2007 Diagnostic Protocols for Penaeus monodon-Type Baculovirus (MBV) of Penaeid Shrimp-Part 1: Microscopy Method with Wet Mount

Anhui Provincial Standard of the People's Republic of China, tableting method

DB34/T 2553-2015 Technical requirements and test methods for hydraulically driven variable valve timing (VVT) systems of automobile engines

Professional Standard - Environmental Protection, tableting method

HJ 1149-2020 Determination of gamma radionuclides in ambient air aerosol by filter membrane pressing/gamma spectrometry

ZA-SANS, tableting method

SANS 50712:1993 Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force
SANS 50713:1993 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending

CENELEC - European Committee for Electrotechnical Standardization, tableting method

EN 60893-2:1994 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 2: Methods of Test

AT-ON, tableting method

ONORM EN 713-1994 Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
OENORM EN 302-6-2021 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions

Professional Standard - Geology, tableting method

DZ/T 0279.10-2016 Methods of Analysis of Regional Geochemical Samples - Part 10: Determination of Chlorine and Bromine Quantification Powder Compression - X-ray Fluorescence Spectrometry
DZ/T 0279.1-2016 Analytical methods of regional geochemical samples Part 1: Determination of 24 components such as aluminum oxide and other components by powder compression—X-ray fluorescence spectrometry

Professional Standard - Non-ferrous Metal, tableting method

YS/T 581.18-2012 Chemical analysis methods and physical properties of Aluminum Fluoride.Part 18:X-ray fluorescence spectrometric method for the determination of elements content using pressed powder tablets
YS/T 273.15-2012 Chemical analysis methods and physical properties of cryolite.Part 15:X-ray fluorescence spectrometric method for the determination of elements content using pressed powder tablets

AASHTO - American Association of State Highway and Transportation Officials, tableting method

T305-1997 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)

European Committee for Electrotechnical Standardization（CENELEC）, tableting method

EN 60893-2:2004 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2: Methods of test
EN 50332-2:2003 Sound system equipment: Headphones and earphones associated with portable audio equipment Maximum sound pressure level measurement methodology and limit considerations Part 2: Matching of sets with headphones if either or both are offered separately (Re
EN 50332-2:2013 Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one packa

European Association of Aerospace Industries, tableting method

AECMA PREN 2591-B19-1993 Aerospace Series Elements in Electrical and Optical Connection Test Methods Part B19 - Voltage Strength for Lugs and in-Line Splices