ZH
RU
ES

differential thermal analysis

differential thermal analysis, Total:343 items.

In the international standard classification, differential thermal analysis involves: Education, Thermodynamics and temperature measurements, Ceramics, Products of the chemical industry, Physics. Chemistry, Testing of metals, Analytical chemistry, Measurement of volume, mass, density, viscosity, Iron and steel products, TESTING, Textile fibres, Solar energy engineering, Medical sciences and health care facilities in general, Ferrous metals, Raw materials for rubber and plastics, Optics and optical measurements, Farming and forestry, Energy and heat transfer engineering in general, Quality, Protection against fire, Plastics, Refractories, Petroleum products in general, Insulating fluids, Insulating materials, Materials for aerospace construction, Surface treatment and coating, Pipeline components and pipelines, Air quality, Non-ferrous metals, Electronic components in general, Coals, Laboratory medicine, Ferroalloys, Rubber, Standardization. General rules, Seals, glands, Shafts and couplings, Mechanical testing, Pulps, Electrical engineering in general, Non-destructive testing, Aids for disabled or handicapped persons, Installations in buildings, Valves, Heat pumps, Materials for the reinforcement of composites, Medical equipment, Test conditions and procedures in general.

Professional Standard - Education, differential thermal analysis

JY/T 0589.5-2020 General Principles of Thermal Analysis Methods Part 5: Thermogravimetric-Differential Thermal Analysis and Thermogravimetric-Differential Scanning Calorimetry
JY/T 0589.2-2020 General Principles of Thermal Analysis Methods Part 2: Differential Thermal Analysis
JY/T 0589.3-2020 General Principles of Thermal Analysis Methods Part 3: Differential Scanning Calorimetry
JY/T 0589.4-2020 General Principles of Thermal Analysis Methods Part 4: Thermogravimetry
JY/T 014-1996 General Principles of Thermal Analysis Methods
JY/T 0589.1-2020 General principles of thermal analysis methods Part 1: General principles
JY/T 0565-2020 General rules for electrothermal atomic absorption spectrometry

German Institute for Standardization, differential thermal analysis

DIN 51007:2019 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN 51007:2019-04 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN 51007-2:2021 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
DIN 51007-2:2021-10 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
DIN 51007:1994 Thermal analysis; differential thermal analysis; principles
DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN EN ISO/CIE 11664-6:2022-12 Colorimetry - Part 6: CIEDE2000 colour-difference formula (ISO/CIE 11664-6:2022); German version EN ISO/CIE 11664-6:2022
DIN EN 6041:2018-03 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
DIN EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
DIN EN 6064:2018-03 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC); German and English version EN 6064:2017
DIN EN 6064:2018 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC); German and English version EN 6064:2017
DIN 3761-15:1984 Rotary shaft lip type seals for automobils; test; determination of cold resistant of elastomers; differential-thermoanalysis
DIN 53765:1994 Testing of plastics and elastomeres; thermal analysis; DSC-method
DIN EN ISO 11357-1:2023-06 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2023); German version EN ISO 11357-1:2023
DIN EN ISO 11357-8:2020 Plastics - Differential scanning calorimetry - Part 8: Determination of thermal conductivity (ISO/DIS 11357-8:2019); German and English version prEN ISO 11357-8:2019
DIN EN ISO 11357-4:2021-05 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021); German version EN ISO 11357-4:2021
DIN 53436-2:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN EN ISO 11357-4:2020 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO/DIS 11357-4:2020); German and English version prEN ISO 11357-4:2020
DIN EN ISO 11357-8:2021-05 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021); German version EN ISO 11357-8:2021
DIN EN ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002); German version EN ISO 8655-6:2002

Professional Standard - Commodity Inspection, differential thermal analysis

SN/T 2240-2008 Accelerated storage test,thermal analysis methods for dangerous goods.Differential thermal analysis(DTA)and thermo gravimetric analysis(TGA)

NATO - North Atlantic Treaty Organization, differential thermal analysis

STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)

North Atlantic Treaty Organization Standards Agency, differential thermal analysis

STANAG 4515-2002 EXPLOSIVES: THERMAL CHARACTERIZATION BY DIFFERENTIAL THERMAL ANALYSIS, DIFFERENTIAL SCANNING CALORIMETRY AND THERMOGRAVIMETRIC ANALYSIS

Professional Standard - Machinery, differential thermal analysis

JB/T 9369-1999 Differential thermal analyzer
JB/T 9369-2017 Differential Thermal Analyzer
JB/T 6856-1993 Thermogravimetry-differential thermal analyzer
JB/T 6856-2017 Thermogravimetric-Differential Thermal Analyzer
JB/T 8280-1999 Specifications of thermomegnetic oxygen analyzers

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, differential thermal analysis

GB/T 6297-2002 Standard test method for differential thermal analysis of row materials of ceramic
GB/T 15814.3-1995 Reagent of fireworks and firecrackers--Thermal compatibility test--Method of DTA and DSC
GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
GB 11166-1989 Specifications of thermomagnetic oxygen analyzers
GB/T 13464-1992 Thermal analysis test methods for thermal stability of materials
GB/T 13464-2008 Thermal analysis test methods for thermal stability of materials
GB/T 19466.1-2004 Plastics-Differential scanning calorimetry(DSC)-Part 1:General principles
GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis
GB/T 17802-2011 Thermal analysis test methods for Arrhenius kinetics constants of thermally unstable materials
GB/T 6098.1-1985 Test method for length of cotton fibres--Roller analyser
GB/T 11998-1989 Determination of glass transition temperature of plastics--Thermomechanical analysis
GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
GB/T 29174-2012 Thermal analysis test method for constant-temperature stability of materials

American Society for Testing and Materials (ASTM), differential thermal analysis

ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1131-98 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E537-07 Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
ASTM E1131-20 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D6370-23 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1131-08(2014) Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1131-03 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E3142-18a(2023) Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM D6370-99(2009) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM D6370-99 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM D4591-97 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4591-01 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4591-07 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4591-07(2012) Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E3142-18 Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM E3142-18a Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D8339-20 Standard Test Method for The Analysis of Flue Gas Desulfurization Solids by Macro Thermogravimetric Analysis
ASTM D8474-23 Standard Test Method for Recovered Carbon Black (rCB)—Compositional Analysis by Thermogravimetry (TGA)
ASTM E793-06 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E537-02 Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
ASTM D7582-12 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D7582-15 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D6370-99(2019) Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM D7582-10 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E1641-07 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E2716-09(2014) Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM E928-01 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E928-96 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E928-08 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E2008-08(2014)e1 Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM D8474-22 Standard Test Method for Recovered Carbon Black (rCB)—Compositional Analysis by Thermogravimetry (TGA)
ASTM D7582-09 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
A-A-59410A-2015 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409 NOT 1-2012 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-59163A-2010 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-99 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409-1991 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55281-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55220-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54923-1993 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A 59377B-2016 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E2206-02 Standard Method for Force Calibration Of Thermomechnical Analyzers
ASTM E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2744-21 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E1782-03 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1782-98 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E2008-17(2021) Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM E1782-22 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1782-14 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E2046-08 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM E1782-08 Standard Test Method for Determining Vapor Pressure by Thermal Analysis

Military Standard of the People's Republic of China-General Armament Department, differential thermal analysis

GJB 772.202-1989 Explosives test methods Explosives compatibility test Differential thermal analysis and differential scanning calorimetry
GJB 737.14-1995 Test Methods for Pyrotechnic Agents Compatibility Test Differential Thermal Analysis and Differential Scanning Calorimetry
GJB 8683.11-2015 Test methods for physical parameters of pyrotechnics Part 11: Determination of spontaneous ignition temperature Differential thermal analysis and differential scanning calorimetry
GJB 8683.10-2015 Test methods for physical parameters of pyrotechnics Part 10: Determination of thermal conductivity by differential scanning calorimetry

Professional Standard - Aviation, differential thermal analysis

HB 6623.1-1992 Method for Determination of β Transition Temperature of Titanium Alloy Differential Thermal Analysis
HB 5297.23-2001 Determination of Hydrogen Content by Pulse Heating-thermal Conductivity Method for Chemical Analysis of Titanium Alloy
HB 5220.50-2008 Methods for chemical analysis of superalloys. Part 50: Determination of hydrogen content by impulse heating-thermal conductivity method
HB 5297.24-2001 Determination of Oxygen and Nitrogen Content by Pulse Heating Infrared Thermal Conductivity Method for Chemical Analysis of Titanium Alloy

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, differential thermal analysis

GJB 5891.17-2006 Test method of loading material for initiating explosive device Part 17: Compatibility test Method of DTA and DSC
GJB 5382.11-2005 Test methods of physical parameter for pyrotechnic. Part 11: Determination of Autoignition temperature. DTA and DSC method
GJB 5383.11-2005 Test methods of sensitivity and stability for pyrotechnic. Part 11: Test for stability and com[atibility. DTA and DSC method
GJB 5382.10-2005 Test methods of physical parameter for pyrotechnic. Part 10: Determination of thermal conductivity. DSC method

Association Francaise de Normalisation, differential thermal analysis

NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
NF EN ISO 11357-4:2021 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 4 : détermination de la capacité thermique massique
NF EN ISO 11357-3:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 3 : détermination de la température et de l'enthalpie de fusion et de cristallisation
NF B35-655-6*NF EN ISO 8655-6:2003 Piston-operated volumetric apparatus - Part 6 : gravimetric methods for the determination of measurement error
NF T30-007-6*NF EN ISO 11664-6:2016 Colorimetry - Part 6 : CIEDE2000 colour-difference formula
NF EN ISO/CIE 11664-6:2022 Colorimétrie - Partie 6 : Formule de la différence de couleur CIEDE2000
NF C26-214:1993 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry.
NF L17-041*NF EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
NF T51-507-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: determination of specific heat capacity
NF T51-507-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
NF T51-507-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8 : determination of thermal conductivity
NF T51-507-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
NF EN ISO 11357-8:2021 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 8 : détermination de la conductivité thermique
NF L52-250-414*NF EN 3475-414:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414 : differential scanning calorimeter (DSC test)
NF T51-507-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1 : general principles.
NF T51-507-1*NF EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1 : general principles
NF T51-506:2011 Plastics - Thermosetting resins - Analysis by liquid chromatography (HPLC)
NF EN ISO 11357-1:2023 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 1 : principes généraux
NF EN 16905-4:2018 Pompes à chaleur à moteur endothermique alimenté au gaz - Partie 4 : méthodes d'essai
NF L17-040*NF EN 6064:2017 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
NF C73-193-2-1*NF EN 50193-2-1:2016 Electric instantaneous water heaters - Part 2-1 : methods for measuring the performance - Multifunctional electric instantaneous water heaters
NF EN 50193-2-1/A1:2020 Chauffe-eau électriques instantanés - Partie 2-1 : méthodes de mesure de l'aptitude à la fonction - Chauffe-eau électriques instantanés multifonctions
NF EN 50193-2-1:2016 Chauffe-eau instantanés électriques - Partie 2-1 : méthodes de mesure de l'aptitude à la fonction - Chauffe-eau instantanés électriques multifonctions

National Metrological Verification Regulations of the People's Republic of China, differential thermal analysis

JJG(电子) 12035-1991 2010 Type Heterodyne Analyzer Verification Regulations
JJG 663-1990 Verification Regulation of Thermal Conductivity Hydrogen Analyzer
JJG 662-1990 Verification Regulation of Thermo-Magnetic Oxygen Analyzers

Society of Automotive Engineers (SAE), differential thermal analysis

SAE J409-1995 Product Analysis Permissible Variations from Specified chemical analysis of a Heat or Cast of Steel

Professional Standard - Petroleum, differential thermal analysis

SY/T 0545-2012 Determination of thermal property parameters of the wax precipitation in crude oil.Test method by differential scanning calorimetry
SY 0545-2012 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
SY/T 0545-1995 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
SY/T 5117-1996 Rock pyrolysis analysis method
SY/T 6188-1996 Gas Chromatographic Analysis Method of Rock Pyrolysis
SY/T 6188-2016 Gas Chromatographic Analysis Method of Rock Pyrolysis

Korean Agency for Technology and Standards (KATS), differential thermal analysis

KS B ISO 8655-6:2017 Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error
KS B ISO 8655-6:2006 Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error
KS D 0228-2008 Product analysis and its tolerance for wrought steel
KS C 2002-1998 Test method of thermal life evaluation of plastics by thermogravimetry
KS L 1609-1994 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
KS M ISO 11357-4-2016(2021) Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS D 1790-1993 Methods of chemical analysis for nickel chromium electric heating material
KS D 1838-2014 Methods of chemical analysis for iron chromium electric heating material
KS M ISO 11358-2006(2011) Plastics－Thermogravimetry(TG) of polymers－General principles
KS D 1701-2009 Determination of trace impurities in high purity gold-Matrix extraction method by heating
KS M ISO 11357-1-2016(2021) Plastics－Differential scanning calorimetry(DSC)－Part 1：General principles
KS D 1790-2003 Method of chemical analysis for nickel chromium electric heating material
KS D 1838-2009 Methods of chemical analysis for iron chromium electric heating material
KS D 1838-2019 Methods of chemical analysis for iron chromium electric heating material
KS D 1790-2018 Method of chemical analysis for nickel chromium electric heating material
KS A 7250-2021 An analysis method for grip posture of portable devices
KS B 8291-1-2009 Ground source heat pump-Thermal conductivity test mothod-Part 1:Vertical close loop type and energy file type

KR-KS, differential thermal analysis

KS B ISO 8655-6-2017 Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error
KS C 2002-1998(2023) Test method of thermal life evaluation of plastics by thermogravimetry
KS M ISO 11357-4-2016 Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS M ISO 11357-1-2016 Plastics－Differential scanning calorimetry(DSC)－Part 1：General principles

IETF - Internet Engineering Task Force, differential thermal analysis

RFC 7429-2015 Distributed Mobility Management: Current Practices and Gap Analysis

Professional Standard - Ferrous Metallurgy, differential thermal analysis

YB/T 949-1979 Chemical Analysis Tolerance Formulate Method
YB/T 4010-1991 Determination of Magnesium Oxide by Subtraction Method for Chemical Analysis of High Quality Magnesia
YB 4010-1991 Determination of Magnesium Oxide by Subtraction Method for Chemical Analysis of High Quality Magnesia

Japanese Industrial Standards Committee (JISC), differential thermal analysis

JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
JIS G 0321:1966 Product analysis and its tolerance for wrought steel
JIS Z 8781-6:2017 Colorimetry -- Part 6: CIEDE2000 Colour-difference formula
JIS R 1618:2002 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
JIS K 7120:1987 Testing methods of plastics by thermogravimetry
JIS R 1618:1994 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
JIS H 1411:1996 Methods of chemical analysis for iron chromium electric heating material
JIS H 1412:1996 Methods of chemical analysis for nickel chromium electric heating material
JIS G 0320:2004 Standard test methods for heat analysis of steel products
JIS G 0320:2009 Standard test method for heat analysis of steel products
JIS K 7197:1991 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis

European Association of Aerospace Industries, differential thermal analysis

AECMA PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorimetry (DSC) Edition P1
AECMA PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys Edition P 1
AECMA PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., differential thermal analysis

ASHRAE AT-01-9-4-2001 Thermoeconomic Analysis of Absorption Heat Transformers
ASHRAE LV-11-C001-2011 New Analytical and Numerical Solutions for the Short-term Analysis of Vertical Ground Heat Exchangers
ASHRAE 4669-2004 Thermal Analysis of Solar-Powered Continuous Adsorption Air-Conditioning System
ASHRAE 4423-2001 A Simple Approach to Thermal Performance Analysis of Small Hermetic Reciprocating Compressors
ASHRAE 4327-2000 Second Law Analysis of Multi-Stage Lithium Bromide/Water Absorption Heat Transformers
ASHRAE SF-98-31-3-1998 New Hot Water Consumption Analysis and Water-Heating System Sizing Methodology
ASHRAE AN-04-8-1-2004 A Bin Method Energy Analysis for Ground-Coupled Heat Pumps (RP-1217)
ASHRAE PH-97-3-2-1997 Generalized Component Design Model by Combined Heat and Mass Transfer Analysis in NH3-H2O Absorption Heat Pump Systems

PT-IPQ, differential thermal analysis

E E 16-1971

International Organization for Standardization (ISO), differential thermal analysis

ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
ISO/CIE 11664-6:2014 Colorimetry - Part 6: CIEDE2000 Colour-difference formula
ISO/CIE 11664-6:2022 Colorimetry — Part 6: CIEDE2000 colour-difference formula
ISO/CIE 11664-6:2022 | EN ISO/CIE 11664-6:2022 Colorimetry — Part 6: CIEDE2000 colour-difference formula
ISO 8655-6:2002/cor 1:2008 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error; Technical Corrigendum 1
ISO 11357-4:2005 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity
ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-1:2023 Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
ISO/TR 22914:2020 Statistical methods for implementation of Six Sigma — Selected illustration of analysis of variance
ISO/CD 22207:1980 Kraft lignin - Determination of thermal stability by Thermogravimetry
ISO/DIS 22207:2023 Kraft lignin — Determination of thermal stability by Thermogravimetry
ISO 11359-1:2014 Plastics - Thermomechanical analysis (TMA) - Part 1: General principles
ISO 7111:1987 Plastics; Thermogravimetry of polymers; Temperature scanning method
ISO 19935-2:2020 Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp

Professional Standard - Agriculture, differential thermal analysis

2347药典二部-2010 APPENDIX VIII Q THERMAL ANALYSIS
99药典四部-2015 0600 Determination of physical constants 0661 Thermal analysis
80药典四部-2020 0600 Determination of physical constants 0661 Thermal analysis
806兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0661 Thermal Analysis

Group Standards of the People's Republic of China, differential thermal analysis

T/CCFA 00004-2015 Quantitative analysis of PPS/PTFE-Differential scanning calorimetry (DSC)
T/ZNL 001-2021 The detection method for anti-thermal aging performance of electric vehicle charging cable Thermogravimetric analysis
T/CSTM 00253-2020 Test method of thermal analysis coupled with mass spectrometry for phenolic resin

American Society of Mechanical Engineers (ASME), differential thermal analysis

ASME STP-PT-054-2012 Concentrated Solar Power (CSP) Codes and Standards Gap Analysis

Professional Standard - Hygiene , differential thermal analysis

WS/T 409-2013 Estimation of total analytical error for clinical laboratory methods

中国石油天然气总公司, differential thermal analysis

SY/T 6015-1994 Oil and gas display analyzer rock pyrolysis analysis method

European Committee for Standardization (CEN), differential thermal analysis

EN ISO 11664-6:2016 Colorimetry Part 6: CIEDE2000 Colour-difference formula
EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
EN ISO 11357-1:2023 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2023)
EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2009)
EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
EN ISO/CIE 11664-6:2022 Colorimetry - Part 6: CIEDE2000 colour-difference formula (ISO/CIE 11664-6:2022)

International Commission on Illumination (CIE), differential thermal analysis

CIE S 014-6/E-2013 Colorimetry - Part 6: CIEDE2000 Colour-Difference Formula

ES-UNE, differential thermal analysis

UNE-EN ISO/CIE 11664-6:2023 Colorimetry - Part 6: CIEDE2000 colour-difference formula (ISO/CIE 11664-6:2022)
UNE-EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
UNE-EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
UNE-EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE-EN 6064:2017 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in February of 2018.)
UNE-EN ISO 11357-1:2017 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
UNE-EN 50193-2-1:2016/A1:2021 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters
UNE-EN 50193-2-1:2016 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters

农业农村部, differential thermal analysis

NY/T 3497-2019 Industrial Analysis of Agricultural Biomass Raw Materials by Thermogravimetric Analysis
NY/T 3495-2019 General principles of thermogravimetric analysis of agricultural biomass raw materials
NY/T 3496-2019 Kinetic parameters of thermal cracking of agricultural biomass raw materials using thermogravimetric analysis

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), differential thermal analysis

ASHRAE 4833-2006 Impacts of Manufacturing Tolerances of the Effectiveness-Ntu Method for Regenerative Exchanger Design

Danish Standards Foundation, differential thermal analysis

DS/ISO/TR 22914:2020 Statistical methods for implementation of Six Sigma – Selected illustration of analysis of variance
DS/EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
DS/ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity
DS/ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity
DS/INSTA 216:1990 Plastics pipes. Thermoanalytic test methods for the determination on oxidation stability
DS/EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
DS/EN ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
DS/EN ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity (ISO 11357-4:2021)

YU-JUS, differential thermal analysis

JUS B.G8.057-1982 MethcxJs of analysis of iron ore. Experimental methodsfor checking the bias ofsampling

未注明发布机构, differential thermal analysis

NF X70-100-2:2006 Essais de comportement au feu - Analyse des effluents gazeux - Partie 2 : méthode de dégradation thermique au four tubulaire
DIN EN 10243-2 Ber 1:2005 Drop forgings – Dimensional tolerances – Part 2: Hot manufactured in horizontal upsetting machines
BS ISO 18373-2:2008(2011) Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2 : Measurement of the enthalpy of fusion of crystallites
DIN EN ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity (ISO 11357-8:2021)

国家市场监督管理总局、中国国家标准化管理委员会, differential thermal analysis

GB/T 37186-2018 Gas analysis—Determination of sulfur dioxide and nitrogen oxides—Ultraviolet differential optical absorption spectroscopy
GB/T 36800.1-2018 Plastics—Thermomechanical analysis(TMA)—Part 1:General principles

Professional Standard - Aerospace, differential thermal analysis

QJ 2670.1-1994 General Rules for Error Analysis and Accuracy Evaluation of Telemetry Parameters
QJ 2670.4-1994 Error Analysis and Accuracy Evaluation Method of Telemetry Parameters Digital Quantities
QJ 2670.5-1994 Error Analysis and Accuracy Evaluation Method of Telemetry Parameters Speed Variable
QJ 2670.3-1994 Error Analysis and Accuracy Evaluation Method of Remote Measurement Parameters
QJ 1791-1989 A Method of Analyzing the Active Section Error Using the Free Section Data of Surface-to-Surface Missile

CEN - European Committee for Standardization, differential thermal analysis

EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
EN 6064:2017 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)

Professional Standard - Energy, differential thermal analysis

NB/SH/T 0859-2013 Standard test method for the thermal stability of chemicals by thermal analysis

ETSI - European Telecommunications Standards Institute, differential thermal analysis

GR ENI 003-2018 Experiential Networked Intelligence (ENI); Context-Aware Policy Management Gap Analysis (V1.1.1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, differential thermal analysis

PREN 6041-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Non-Metallic Materials (Uncured) by Differential Scanning Calorimetry (DSC) (Edition P1)
PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis

国家质量监督检验检疫总局, differential thermal analysis

SN/T 3078.2-2015 Determination of thermal stability of chemicals Part 2: Thermogravimetric analysis

Professional Standard - Chemical Industry, differential thermal analysis

HG/T 2953-1986 Standard layout for analytical method by gas chromatography
HG/T 2954~2955-2008 Standard writing format for atomic absorption spectroscopic analysis method Standard writing format for molecular absorption spectroscopic analysis method
HG/T 2955-2008 Layouts for standards of molecular absorption spectrometric analysis

Taiwan Provincial Standard of the People's Republic of China, differential thermal analysis

CNS 3158-2008 Product analysis and its tolerance for wrought steel
CNS 3158-1982 Method of Analysis and Tolerance for the Rolled or Forged Pooducts of Steel
CNS 14145-1998 Methods of test for measuring thermal expansion of fine ceramics by thermomechanical analysis
CNS 10006-1984 Method for Photoelectric Emission Spectrochemical Analysis of Iron And Steel

RU-GOST R, differential thermal analysis

GOST R 56754-2015 Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
GOST R 55134-2012 Plastics. Differential scanning calorimetry (DSC). Part 1. General principles
GOST 32618.1-2014 Plastics. Thermomechanical analysis (TMA). Part 1. General principles

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, differential thermal analysis

GB/T 19466.4-2016 Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity
GB/T 33304-2016 Testing method of combustion characteristics of coal—Thermogravimetric analysis
GB/T 4498.2-2017 Rubber—Determination of ash—Part 2: Thermogravimetric analysis
GB/T 6098-2018 Test method for length of cotton fibres—Roller analyser

IT-UNI, differential thermal analysis

UNI EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity
UNI EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
UNI 4353-1959

British Standards Institution (BSI), differential thermal analysis

BS EN ISO 11357-8:2021 Plastics. Differential scanning calorimetry (DSC). Determination of thermal conductivity
BS EN 6041:2018 Aerospace series. Non-metallic materials. Test method. Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Temperature wave analysis method
PD ISO/TR 22914:2020 Statistical methods for implementation of Six Sigma. Selected illustration of analysis of variance
BS EN 6064:2017 Aerospace series. Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
BS ISO 11359-1:2014 Plastics. Thermomechanical analysis (TMA). General principles
BS ISO 78-2:1999 Chemistry - Layout for standards - Methods of chemical analysis
BS EN ISO 6145-7:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
20/30394870 DC BS EN ISO 11357-8. Plastics. Differential scanning calorimetry. Part 8. Determination of thermal conductivity
20/30406588 DC BS EN ISO 11357-4. Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity

Professional Standard - Petrochemical Industry, differential thermal analysis

SH/T 0632-1996 Aircraft Turbine Engine Lubricant Specific Heat Determination (Thermal Analysis Method)

国家能源局, differential thermal analysis

SY/T 7661-2022 Pyrolysis analysis method of oil content in mud shale

Professional Standard - Electron, differential thermal analysis

SJ/Z 3206.14-1989 General rules for error in spectrum chemical analysis and data processing in laboratories

Professional Standard - Medicine, differential thermal analysis

YY/T 1452-2016 Dry hematology analyzer (centrifuge method)
YY/T 0641-2008 Standard Test Method for Transformation Temperature Of nickel.Titanium Alloys by Thermal analysis

Aerospace, Security and Defence Industries Association of Europe (ASD), differential thermal analysis

ASD-STAN PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorimetry (DSC) (Edition P1)

Professional Standard - Textile, differential thermal analysis

FZ/T 01160-2022 Quantitative analysis of textile polyphenylene sulfide fiber and polytetrafluoroethylene fiber mixture Differential scanning calorimetry (DSC)

Malaysia Standards, differential thermal analysis

MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

American National Standards Institute （ANSI), differential thermal analysis

ANSI/ASTM D3418:1999 Test Method for Transition Temperatures of Polymers by Thermal Analysis
ANSI/ASTM D3895:1998 Test Method for Oxidative Induction Time of Polyolefins by Thermal Analysis (08.03)

PL-PKN, differential thermal analysis

PN C89431-1993 Plastics. Thermogravimetry of polymers. Temperature scanning method
PN-EN ISO 11357-4-2021-07 E Plastics--Differential scanning calorimetry (DSC)--Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
PN-EN ISO 11357-8-2021-08 E Plastics--Differential scanning calorimetry (DSC)--Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
PN-EN 50193-2-1-2016-08/A1-2020-10 E Electric instantaneous water heaters -- Part 2-1: Methods for measuring the performance -- Multifunctional electric instantaneous water heaters

AT-ON, differential thermal analysis

OENORM EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
OENORM EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)

CH-SNV, differential thermal analysis

SN EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
SN EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)

Lithuanian Standards Office , differential thermal analysis

LST EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
LST EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
LST EN 50193-2-1/A1-2020 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters

AENOR, differential thermal analysis

UNE-EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)

European Committee for Electrotechnical Standardization（CENELEC）, differential thermal analysis

EN 50193-2-1:2016 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters

Chongqing Provincial Standard of the People's Republic of China, differential thermal analysis

DB50/T 504-2013 The detection method of the front valve of the differential pressure integral type micro-flow metering compensation meter

Professional Standard - Public Safety Standards, differential thermal analysis

GA/T 76-1994 Test method for thermal analysis of the constant temperature stability of substances