ZH
RU
ES

Principle of Mechanical Shock

Principle of Mechanical Shock, Total:499 items.

In the international standard classification, Principle of Mechanical Shock involves: Vibrations, shock and vibration measurements, Semiconductor devices, Vocabularies, Packaging materials and accessories, Mechanical testing, Plastics, Measurement of time, velocity, acceleration, angular velocity, Ergonomics, Vibration and shock with respect to human beings, Hand-held tools, Company organization and management, Accident and disaster control, Electrical accessories, Bottles. Pots. Jars, Environmental testing, Surface treatment and coating, Equipment for the chemical industry, Testing of metals, Glass, Printed circuits and boards, Construction equipment, Electricity. Magnetism. Electrical and magnetic measurements, Equipment for processing of minerals, Electromechanical components for electronic and telecommunications equipment, Packaging and distribution of goods in general, Protection of and in buildings, Aerospace electric equipment and systems, Telecontrol. Telemetering, Hydraulic energy engineering, Graphical symbols, Fluid power systems, Seagoing vessels, Electrical and electronic testing, Protective equipment, Motor cycles and mopeds, Shafts and couplings, Electronic display devices, Mining equipment, Tunnel construction, Safety of machinery, Materials for aerospace construction, Components for electrical equipment, Fruits. Vegetables, Electrical engineering in general, Components and accessories for telecommunications equipment.

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Principle of Mechanical Shock

JEDEC JESD22-B104C-2004 Mechanical Shock
JEDEC JESD22-B110A-2004 Subassembly Mechanical Shock
JEDEC JESD22-B110B-2013 Mechanical Shock - Component and Subassembly
IPC/JEDEC-9703-2009 Mechanical Shock Test Guidelines for Solder Joint Reliability

British Standards Institution (BSI), Principle of Mechanical Shock

BS ISO 18431-4:2007 Mechanical vibration and shock - Signal processing - Shock-response spectrum analysis
BS ISO 18431-1:2005 Mechanical vibration and shock. Signal processing - General introduction
BS ISO 18431-1:2006 Mechanical vibration and shock - Signal processing - General introduction
BS ISO 18431-3:2014 Mechanical vibration and shock. Signal processing. Methods of time-frequency analysis
BS ISO 18437-1:2012 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Principles and guidelines
BS EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Non-instrumented impact test
BS ISO 5348:1998 Mechanical vibration and shock - Mechanical mounting of accelerometers
BS ISO 5348:2021 Mechanical vibration and shock. Mechanical mounting of accelerometers
BS ISO 8568:2008 Mechanical shock. Testing machines. Characteristics and performance
BS ISO 8568:2007 Mechanical shock. Testing machines. Characteristics and performance
BS 7347:1990 Guide for characteristics and performance of mechanical shock testing machines
BS ISO 5805:1998 Mechanical vibration and shock - Human exposure - Vocabulary
BS 3015:1991 Glossary of terms relating to mechanical vibration and shock
BS ISO 5805:1997 Mechanical vibration and shock. Human exposure. Vocabulary
19/30394091 DC BS ISO 5348. Mechanical vibration and shock. Mechanical mounting of accelerometers
BS ISO 2041:2009 Mechanical vibration, shock and condition monitoring - Vocabulary
BS ISO 18431-2:2005 Mechanical vibration and shock - Signal processing - Time domain windows for Fourier Transform analysis
BS ISO 10068:2013 Mechanical vibration and shock. Mechanical impedance of the human hand-arm system at the driving point
BS EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of Machines - Information for the application of source isolation
PD CEN/TR 17603-32-25:2022 Space engineering. Mechanical shock design and verification handbook
BS ISO 10068:2012 Mechanical vibration and shock. Mechanical impedance of the human hand-arm system at the driving point
BS ISO 7626-5:2019 Mechanical vibration and shock. Experimental determination of mechanical mobility - Measurements using impact excitation with an exciter which is not attached to the structure
BS ISO 18437-2:2005+A1:2010 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Resonance method
BS ISO 15230:2007 Mechanical vibration and shock. Coupling forces at the man-machine interface for hand-transmitted vibration
BS EN 1299:1997 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
BS EN 3841-507:2005 Aerospace series - Circuit breakers - Test methods - Mechanical shocks
BS EN 3841-507:2004 Circuit breakers-Test methods-Part 507:Mechanical shocks
BS ISO 2041:2018 Tracked Changes. Mechanical vibration, shock and condition monitoring. Vocabulary
BS ISO 18431-2:2004 Mechanical vibration and shock. Signal processing - Time domain windows for Fourier Transform analysis
BS ISO 2631-5:2018 Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration. Method for evaluation of vibration containing multiple shocks
BS EN 60512-7-2:2012 Connectors for electronic equipment. Tests and measurements. Impact tests (free connectors). Test 7b. Mechanical strength impact
BS EN ISO 13090-1:1998 Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Exposure to whole-body mechanical vibration and repeated shock
BS ISO 8727:1997 Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems
BS ISO 21289:2008 Mechanical vibration and shock - Parameters to be specified for the acquisition of vibration data
BS 7439:1991 Method for exchange of information for the analytical assessment of shock resistance of mechanical systems
BS ISO 8727:1997+A1:2015 Mechanical vibration and shock. Human exposure. Biodynamic coordinate systems
BS IEC 62715-6-3:2020 Flexible display devices - Mechanical test methods. Impact and hardness tests
BS ISO 18312-2:2012 Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures. Indirect method
BS EN IEC 60749-10:2022 Tracked Changes. Semiconductor devices. Mechanical and climatic test methods. Mechanical shock. device and subassembly
BS ISO 18312-1:2012 Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures. Direct method
BS ISO 18437-4:2008 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Dynamic stiffness method
BS ISO 18437-3:2005+A1:2010 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Cantilever shear beam method
BS 6841:1987 Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
BS ISO 16587:2004 Mechanical vibration and shock - Performance parameters for condition monitoring of structures
BS EN 12111:2002+A1:2009 Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
BS EN ISO 12100-2+A1:2003 Safety of machinery - Basic concepts, general principles for design - Technical principles
BS EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Technical principles
BS EN 1621-1:2012 Motorcyclists' protective clothing against mechanical impact. Motorcyclists' limb joint impact protectors. Requirements and test methods
BS EN 62262:1995 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
BS EN 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

AT-ON, Principle of Mechanical Shock

ONORM S 9001-1978 Mechanical vibrations-shocks; principles and evaluation of Vibration quantities

IPC - Association Connecting Electronics Industries, Principle of Mechanical Shock

IPC TM-650 3.8A-1975 Mechanical Shock@ Connectors

International Organization for Standardization (ISO), Principle of Mechanical Shock

ISO 18431-4:2007 Mechanical vibration and shock - Signal processing - Part 4: Shock-response spectrum analysis
ISO 18437-1:2012 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 1: Principles and guidelines
ISO 5348:1987 Mechanical vibration and shock; Mechanical mounting of accelerometers
ISO 5348:2021 Mechanical vibration and shock - Mechanical mounting of accelerometers
ISO 8568:2007 Mechanical shock - Testing machines - Characteristics and performance
ISO 8568:1989 Mechanical shock; testing machines; characteristics and performance
ISO 5805:1997 Mechanical vibration and shock - Human exposure - Vocabulary
ISO 18431-1:2005 Mechanical vibration and shock - Signal processing - Part 1: General introduction
ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO/TS 15694:2004 Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
ISO 18431-3:2014 Mechanical vibration and shock - Signal processing - Part 3: Methods of time-frequency analysis
ISO 2041:2009 Mechanical vibration, shock and condition monitoring - Vocabulary
ISO 2041:2018 Mechanical vibration, shock and condition monitoring - Vocabulary
ISO 7626-5:1994 Vibration and shock - Experimental determination of mechanical mobility - Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
ISO 10068:2012 Mechanical vibration and shock - Mechanical impedance of the human hand-arm system at the driving point
ISO 5982:1981 Vibration and shock — Mechanical driving point impedance of the human body
ISO 7962:1987 Mechanical vibration and shock; Mechanical transmissibility of the human body in the z direction
ISO 9688:1990 Mechanical vibration and shock; analytical methods of assessing shock resistance of mechanical systems; information exchange between suppliers and users of analyses
ISO 10068:1998 Mechanical vibration and shock - Free, mechanical impedance of the human hand-arm system at the driving point
ISO 7626-5:2019 Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
ISO/TS 10811-2:2000 Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 2: Classification
ISO 8569:1996 Mechanical vibration and shock - Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
ISO 15230:2007 Mechanical vibration and shock - Coupling forces at the man-machine interface for hand-transmitted vibration
ISO 6954:1984 Mechanical vibration and shock — Guidelines for the overall evaluation of vibration in merchant ships
ISO 8727:1997 Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems
ISO 18431-1:2005/Cor 1:2009 Mechanical vibration and shock - Signal processing - Part 1: General introduction; Technical Corrigendum 1
ISO 179-2:1997/Amd 1:2011 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data
ISO 13090-1:1998 Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock
ISO 18431-2:2004 Mechanical vibration and shock - Signal processing - Part 2: Time domain windows for Fourier Transform analysis
ISO 5805:1981 Mechanical vibration and shock affecting man; Vocabulary Bilingual edition
ISO/TS 10811-1:2000 Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 1: Measurement and evaluation
ISO 21289:2008 Mechanical vibration and shock - Parameters to be specified for the acquisition of vibration data
ISO 9996:1996 Mechanical vibration and shock - Disturbance to human activity and performance - Classification
ISO 16587:2004 Mechanical vibration and shock - Performance parameters for condition monitoring of structures
ISO 5982:2019 Mechanical vibration and shock — Range of idealized values to characterize human biodynamic response under whole-body vibration
ISO 18437-2:2005 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 2: Resonance method
ISO 18437-6:2017 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 6: Time-temperature superposition
ISO 8727:1997/Amd 1:2015 Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems; Amendment 1

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Principle of Mechanical Shock

GB/T 29716.4-2018 Mechanical vibration and shock—Signal processing—Part4：Shock-response spectrum analysis
GB/T 35982-2018 Mechanical vibration and shock—Coupling forces at the man-machine interface for hand-transmitted vibration
GB/T 29716.2-2018 Mechanical vibration and shock—Signal processing—Part 2: Time domain windows for Fourier Transform analysis

Korean Agency for Technology and Standards (KATS), Principle of Mechanical Shock

KS B ISO 18431-4:2017 Mechanical vibration and shock — Signal processing — Part 4: Shock-response spectrum analysis
KS B 0136-1986 Glossary of Terms used in Mechanical Vibration and Shock
KS B 0136-1986(2011) Glossary of Terms used in Mechanical Vibration and Shock
KS B 0714-2001 Mechanical vibration and shock-Mechanical mounting of accelerometers
KS B ISO 5348:2014 Mechanical vibration and shock — Mechanical mounting of accelerometers
KS B ISO 5348:2019 Mechanical vibration and shock — Mechanical mounting of accelerometers
KS B ISO 18431-1:2018 Mechanical vibration and shock — Signal processing — Part 1: General introduction
KS B ISO 8568:2013 Mechanical shock-Testing machines-Characteristics and performance
KS B ISO 8568:2018 Mechanical shock — Testing machines — Characteristics and performance
KS B ISO 18431-1:2013 Mechanical vibration and shock－Signal processing－Part 1：General introduction
KS B 0731-2001 Mechanical vibration and shock-Analytical methods of assessing shock of resistance mechanical systems-Information exchange between suppliers and users of analyses
KS B ISO TS 15694:2005 Mechanical vibration and shock-Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
KS B ISO TS 15694:2015 Mechanical vibration and shock－Measurement and evaluation of single shocks transmitted from hand－held and hand－guided machines to the hand－arm system
KS B ISO 18437-1:2017 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines
KS B 0716-2001 Mechanical vibration and shock-Human exposure-Vocabulary
KS B ISO 5805:2014 Mechanical vibration and shock — Human exposure — Vocabulary
KS C 0905-1984 Shock Testing Procedure for Electric Machines and Equipment
KS B ISO 2041:2011 Mechanical vibration, shock and condition monitoring-Vocabulary
KS B ISO 2041:2016 Mechanical vibration, shock and condition monitoring ― Vocabulary
KS B ISO 5805:2019 Mechanical vibration and shock — Human exposure — Vocabulary
KS B ISO 2041:2021 Mechanical vibration, shock and condition monitoring ―Vocabulary
KS B ISO 10068:2014 Mechanical vibration and shock — Mechanical impedance of the human hand-arm system at the driving point
KS B 0722-2012 Mechanical vibration and shock-Mechanical transmissibility of the human body in the z direction
KS B 0722-2001(2011) Mechanical vibration and shock-Mechanical transmissibility of the human body in the z direction
KS B ISO 10068:2001 Mechanical vibration and shock-Free, mechanical impedance of the human hand-arm system at the driving point
KS B ISO 13090-1_2001-2016(2021) Mechanical vibration and shock－Guidance on safety aspects of tests and experiments with people－Part 1：Exposure to whole-body mechanical vibration and repeated shock
KS B ISO 18431-3:2017 Mechanical vibration and shock — Signal processing — Part 3: Methods of time-frequency analysis
KS B ISO 18431-3-2017(2022) Mechanical vibration and shock — Signal processing — Part 3: Methods of time-frequency analysis
KS B ISO TS 15694:2020 Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
KS B ISO 18437-2:2013 Mechanical vibration and shock－Characterization of the dynamic mechanical properties of visco-elastic materials－Part 2：Resonance method
KS B ISO 10811-2-2014(2019) Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification
KS C IEC 60749-10:2004 Semiconductor devices－Mechanical and climatic test methods－Part 10：Mechanical shock
KS C IEC 60749-10:2020 Semiconductor devices — Mechanical and climatic test methods — Part 10: Mechanical shock
KS B ISO 10068:2019 Mechanical vibration and shock — Mechanical impedance of the human hand-arm system at the driving point
KS B ISO 9688:2014 Mechanical vibration and shock-Analytical methods of assessing shock of resistance mechanical systems-Information exchange between suppliers and users of analyses
KS B ISO 9688:2019 Mechanical vibration and shock — Analytical methods of assessing shock resistance of mechanical systems — Information exchange between suppliers and users of analyses
KS B 0726-2014 Mechanical vibration and shock-Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
KS A 1642-1995 Mechanical-shock fragility testing methods of products for packaging design
KS F 8106-1996(2011) Vibration and shock testing methods for construction machinery gauges
KS T 1332-2012(2022) Mechanical-shock fragility testing methods of products for packaging design
KS F 8106-1986 Vibration and shock testing methods for construction machinery gauges
KS B ISO 18437-3:2013 Mechanical vibration and shock-Characterization of the dynamic mechanical properties of visco-elastic materials-Part 3:Cantilever shear beam method
KS B ISO 10811-2:2009 Mechanical vibration and shock-Vibration and shock in buildings with sensitive equipment-Part 2:Classification
KS B ISO 10811-2:2014 Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification
KS B 0726-2001 Mechanical vibration and shock-Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
KS B 0726-2001(2011) Mechanical vibration and shock-Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
KS B ISO 10811-1-2014(2019) Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation
KS F 8106-1996 Vibration and shock testing methods for construction machinery gauges
KS T 1332-2012(2017) Mechanical-shock fragility testing methods of products for packaging design
KS B ISO 18431-2:2013 Mechanical vibration and shock-Signal processing-Part 2:Time domain windows for Fourier Transform analysis
KS B ISO 16587:2006 Mechanical vibration and shock-Performance parameters for condition monitoring of structures
KS B 0730-2001 Mechanical vibration and shock-Disturbance to human activity and performance-Classification
KS B ISO 16587-2016(2021) Mechanical vibration and shock－Performance parameters for condition monitoring of structures
KS B ISO 8727-2016(2021) Mechanical vibration and shock－Human exposure－Biodynamic coordinate systems
KS B ISO 16587:2016 Mechanical vibration and shock－Performance parameters for condition monitoring of structures
KS B ISO 10811-1:2014 Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation
KS B ISO 10811-1:2009 Mechanical vibration and shock-Vibration and shock in buildings with sensitive equipment-Part 1:Measurement and evaluation
KS B ISO 18431-2:2018 Mechanical vibration and shock — Signal processing — Part 2: Time domain windows for Fourier Transform analysis
KS B ISO 9996:2014 Mechanical vibration and shock-Disturbance to human activity and performance-Classification
KS B 0720-5-2001 Vibration and shock-Experimental determination of mechanical mobility- Part 5 : Measurements using impact excitation with an exciter which is not attached to the structure
KS B ISO 8727:2014 Mechanical vibration and shock-Human exposure-Biodynamic coordinate systems
KS B ISO 8727:2004 Mechanical vibration and shock-Human exposure-Biodynamic coordinate systems
KS B ISO 9996:2019 Mechanical vibration and shock — Disturbance to human activity and performance — Classification
KS B ISO 8727:2016 Mechanical vibration and shock－Human exposure－Biodynamic coordinate systems
KS B ISO 5982:2021 Mechanical vibration and shock — Range of idealized values to characterize human biodynamic response under whole-body vibration
KS B ISO 5982-2014(2019) Mechanical vibration and shock — Range of idealized values to characterize seated-body biodynamic response under vertical vibration

KR-KS, Principle of Mechanical Shock

KS B ISO 18431-4-2017 Mechanical vibration and shock — Signal processing — Part 4: Shock-response spectrum analysis
KS B ISO 18431-4-2022 Mechanical vibration and shock — Signal processing — Part 4: Shock-response spectrum analysis
KS B ISO 18437-1-2022 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines
KS B ISO 5348-2019 Mechanical vibration and shock — Mechanical mounting of accelerometers
KS B ISO 18431-1-2018 Mechanical vibration and shock — Signal processing — Part 1: General introduction
KS B ISO 8568-2018 Mechanical shock — Testing machines — Characteristics and performance
KS B ISO 18437-1-2017 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines
KS B ISO 2041-2016 Mechanical vibration, shock and condition monitoring ― Vocabulary
KS B ISO 2041-2021 Mechanical vibration, shock and condition monitoring ―Vocabulary
KS B ISO 5805-2019 Mechanical vibration and shock — Human exposure — Vocabulary
KS B ISO 13090-1_2001-2016 Mechanical vibration and shock－Guidance on safety aspects of tests and experiments with people－Part 1：Exposure to whole-body mechanical vibration and repeated shock
KS B ISO 18431-3-2017 Mechanical vibration and shock — Signal processing — Part 3: Methods of time-frequency analysis
KS B ISO TS 15694-2020 Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
KS B ISO 10068-2019 Mechanical vibration and shock — Mechanical impedance of the human hand-arm system at the driving point
KS C IEC 60749-10-2020 Semiconductor devices — Mechanical and climatic test methods — Part 10: Mechanical shock
KS B ISO 9688-2019 Mechanical vibration and shock — Analytical methods of assessing shock resistance of mechanical systems — Information exchange between suppliers and users of analyses
KS B ISO 16587-2016 Mechanical vibration and shock－Performance parameters for condition monitoring of structures
KS B ISO 8727-2016 Mechanical vibration and shock－Human exposure－Biodynamic coordinate systems
KS B ISO 18431-2-2018 Mechanical vibration and shock — Signal processing — Part 2: Time domain windows for Fourier Transform analysis
KS B ISO 9996-2019 Mechanical vibration and shock — Disturbance to human activity and performance — Classification
KS B ISO 5982-2021 Mechanical vibration and shock — Range of idealized values to characterize human biodynamic response under whole-body vibration

SE-SIS, Principle of Mechanical Shock

SIS SS-ISO 8568:1990 Vibration andshock — Mechanical vibration andshock — Shock-testing machines — Characteristics and performance
SIS SS-ISO 2017:1982 Vibration and shock - Mechanical isolation
SIS SS-ISO 8569:1991 Vibration and shock - Mechanical vibration - Shock and vibration sensitive electronic equipment - Methods ofmeasurement and reporting data of shock and vibration effetcs in buildings
SIS SS-ISO 4866:1991 Vibration and shock - Mechanical vibration and shock - Vibration ofbuildings - Guidelines for the measurement of vibrations and evaluation oftheir effects on buildings
SIS SS 460 48 66-1989 Mechanical vibration andshock — Guidance levels for blasting-induced vibration in buildings
SIS SS-ISO 8821:1990 Vibration and shock — Mechanical vibration — Balancing — Shaft and fitment key convention
SIS SEN 01 25 71-1974 Symbols for electrical diagrams Mechanical relays
SIS MNC 1110-1973 Mechanical stress and impact strength. Meta/lic materia/s. Conversion to SI units

YU-JUS, Principle of Mechanical Shock

JUS Z.P0.003-1980 Vibrations and shocks; Mechanical shock, terms and definitions
JUS N.A5.041-1987 Verification mechanical strength resistance ageinst impact. Impact-test apparatus
JUS C.A4.025-1985 Mechanical testing of meta/s. Charpy impact test (V-notch)
JUS N.A5.044-1988 Verification mechanical strength resistance against inpact. Sprlng-operate? impact-te?t apparatvs

Professional Standard - Pharmaceutical Packaging, Principle of Mechanical Shock

YBB 0038-2004 Tests for impact resistance

International Electrotechnical Commission (IEC), Principle of Mechanical Shock

IEC PAS 62186:2000 Mechanical shock test method
IEC 60749-10:2002/COR1:2003 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock
IEC 62364:2019 RLV Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton turbines
IEC 60749-10:2022 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - device and subassembly
IEC 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
IEC 62262:2021 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 61196-1-304:2011 Coaxial communication cables - Part 1-304: Mechanical test methods - Impact resistance
IEC 62262:2002+AMD1:2021 CSV Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of Mechanical Shock

GB/T 2298-1991 Mechanical vibration and shock-Terminology
GB/T 14123-2012 Mechanical shock.Testing machines.Characteristics and performance
GB/T 14412-1993 Mechanical vibration and shock. Mechanical mounting of accelerometers
GB/T 29716.1-2013 Mechanical vibration and shock.Signal processing.Part 1:General introduction
GB/T 14412-2005 Mechanical vibration and shock.Mechanical mounting of accelerometers
GB/T 15619-1995 Terminology for human exposure to mechanical vibration and shock
GB/T 11349.3-2006 Vibration and shock.Experimental determination of mechanical mobility.Part 3:Measurement using impact excitation
GB/T 6552-2015 Glass containers.Test method for impact resistance
GB/T 7990-2002 Impact test method of glass-lined layer
GB/T 7990-2013 Vitreous and porcelain enamels.Determination of resistance to impact
GB/T 15619-2005 Mechanical vibration and shock.Human exposure.Vocabulary
GB/T 6552-1986 Standard test method for impact resistance of glass containers
GB/T 2298-2010 Mechanical vibration,shock and condition monitoring.Vocabulary
GB/T 11349.3-1992 Experimental determination of mechanical mobility.Measurements using impact excitation
GB/T 16440-1996 Vibration and shock--Mechanical driving point impedance of the human body
GB/T 16441-1996 Vibration and shock--Mechanical transmissibility of the human body in the z direction
GB/T 7994.3-2022 Test method of glass-lined equipments—Part 3：Resistance to mechanical impact via the pistol test
GB/T 19740-2005 Mechanical vibration and shock.Free,Mechanical impedance of the human hand-arm system at the driving point
GB/T 19847-2005 Mechanical vibration and shock.Analytical methods of assessing shock resistance of mechanical systems.Information exchange between suppliers and users of analyses
GB/T 14125-2008 Mechanical vibration and shock.Measurement and evalution of shock and vibration effects on sensitive equipment in buildings
GB/T 23717.2-2009 Mechanical vibration and shock.Vibration and shock in buildings with sensitive equipment.Part 2:Classification
GB/T 8171-1987 Test method for mechanical shock fragility rating of products--Using package cushioning materials
GB/T 8171-2008 Test method for mechanical shock fragility rating of products using packaging cushioning materials
GB/T 32335-2015 Specifications for data acquisition of mechanical vibration and shock vibration
GB/T 23714-2009 Mechanical vibration and shock.Performance parameters for condition monitoring of structures
GB/T 23717.1-2009 Mechanical vibration and shock.Vibration and shock in buildings with sensitive equipment.Part 1:Measurement and evaluation
GB/T 30575-2014 Mechanical vibration and shock.Human exposure.Biodynamic coordinate systems
GB/T 8910.2-1988 Measurement of vibrations in rock drilling machines and pneumatic tools--Measurement for percussive machines
GB/T 29715-2013 Mechanical vibration and shock.Guidelines for dynamic tests and investigations on bridges and viaducts

Japanese Industrial Standards Committee (JISC), Principle of Mechanical Shock

JIS B 0153:1985 Glossary of terms used in mechanical vibration and shock
JIS B 0153:2001 Glossary of terms used in mechanical vibration and shock
JIS K 7111-1:2012 Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
JIS B 7755:1993 Impact testing machines for metallic materials -- Instrumentation
JIS Z 8131:2000 Mechanical vibration and shock -- Human exposure -- Vocabulary
JIS A 8101:1994 Vibration and shock testing methods for construction machinery gauges
JIS B 7756:1993 Impact testing machines for plastic materials -- Instrumentation
JIS B 7722:1999 Charpy pendulum impact test -- Verification of testing machines
JIS Z 0119:1994 Mechanical-shock fragility testing methods of products for packaging design
JIS Z 0119:2002 Mechanical-shock fragility testing methods for packaging and products design
JIS A 8312:2021 Earth-moving machinery -- Machine safety labels -- General principles
JIS B 7722:2018 Metallic materials -- Charpy pendulum impact test -- Verification of testing machines
JIS A 8101:1998 Vibration and shock testing methods for construction machinery gauges
JIS B 7740:1999 Charpy pendulum impact test -- Reference test pieces for verification of testing machines
JIS C 5402-7-2:2019 Connectors for electronic equipment -- Tests and measurements -- Part 7-2: Impact tests (free connectors) -- Test 7b: Mechanical strength impact

American Society for Testing and Materials (ASTM), Principle of Mechanical Shock

ASTM D3332-99(2004) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3332-99 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3332-99(2010) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3332-99(2016) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3332-99(2023) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines

IEC - International Electrotechnical Commission, Principle of Mechanical Shock

PAS 62186-2000 Mechanical Shock Test Method (Edition 1.0)

CZ-CSN, Principle of Mechanical Shock

CSN ISO 5348:1993 Mechanical vibration and shock. Mechanical mounting kof accelerometers
CSN 01 1400-1981 Mechanical vibration and shock. Terminology and definitions.
CSN ISO 5982:1994 Vibration and shock-Methanical driving point impedance of the human body
CSN 01 1312-1981 Mechanical vibrations and shocks. Sym-bols and unita of quantities.
CSN ISO 6954:1993 Mechanical vibration and shock. Guidelines for the overall evaluation of vibration in merchant ships

RO-ASRO, Principle of Mechanical Shock

SR ISO 5348:1994 Mechanical vibration and shock - Mechanical mounting of accelerometers
STAS 6200/8-1971 SHAPED NATURAL STONE FOR BUILDING Methods of physical, mechanical and mineralogical tests Determin ation of the mechanical impact strength
STAS 10730-1976 Vibrations and shocks IZOLATORS Specifying characteristics for mechanical isolation

German Institute for Standardization, Principle of Mechanical Shock

DIN ISO 5348:1999 Mechanical vibration and shock - Mechanical mounting of accelerometers (ISO 5348:1998)
DIN SPEC 45697:2012 Mechanical vibration and shock - Method for evaluation of impulsive whole-body vibration; with CD-ROM
DIN ISO/TS 15694:2004 Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system (ISO/TS 15694:2004); German version CEN ISO/TS 15694:2004
DIN EN 60749-10:2003 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock (IEC 60749-10:2002); German version EN 60749-10:2002
DIN EN 1299:2009 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation (includes Amendment A1:2008); English version of DIN EN 1299:2009-02
DIN EN ISO 13090-1:1998-10 Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998); German version EN ISO 13090-1:1998
DIN EN 1299:2009-02 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation; German version EN 1299:1997+A1:2008 / Note: DIN EN 1299 (1997-05) remains valid alongside this standard until 2009-12-28.
DIN ISO/TS 15694:2004-07 Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system (ISO/TS 15694:2004); German version CEN ISO/TS 15694:2004
DIN SPEC 45697 Berichtigung 1:2013 Mechanical vibration and shock - Method for evaluation of impulsive whole-body vibration; with CD-ROM, Corrigendum to DIN SPEC 45697:2012-06
DIN EN 60749-10:2003-04 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock (IEC 60749-10:2002); German version EN 60749-10:2002 / Note: Under certain conditions, DIN EN 60749 (2002-09) remains valid alongside this standard until 2005-07-01.
DIN EN ISO 13090-1:1998 Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998); German version EN ISO 13090-1:1998
DIN 15209:1984-08 Continous mechanical handling equipment; belt conveyors, impact rings for carrying idlers
DIN EN 1621-1:2013-03 Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods; German version EN 1621-1:2012
DIN ISO 2631-5:2022-09 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 5: Method for evaluation of vibration containing multiple shocks (ISO 2631-5:2018, Corrected version 2022-01)
DIN EN 3841-507:2005 Aerospace series - Circuit breakers - Test methods - Part 507: Mechanical shocks; German and English version EN 3841-507:2004

Standard Association of Australia （SAA）, Principle of Mechanical Shock

AS 2775:2004 Mechanical vibration and shock - Mechanical mounting of accelerometers
AS 1146.3:1990 Methods for impact tests on plastics - Calibration of the testing machine
AS 3763:1990 Mechanical vibration and shock - Guidelines for the overall evaluation of vibration in merchant ships

未注明发布机构, Principle of Mechanical Shock

BS ISO 18431-1:2005(2009) Mechanical vibration and shock — Signal processing — Part 1 : General introduction
DIN EN ISO 8662-6:1995 Hand-held motor-driven machines — measuring mechanical vibrations on the handle — impact drills
BS 7085:1989(1999) Guide to Safety aspects of experiments in which people are exposed to mechanical vibration and shock
BS ISO 18431-2:2004(2009) Mechanical vibration and shock — Signal processing — Part 2 : Time domain windows for Fourier Transform analysis
BS ISO 18437-2:2005+A1:2010(2011) Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco - elastic materials — Part 2 : Resonance method
BS ISO 14964:2000(2001) Mechanical vibration and shock — Vibration of stationary structures — Specific requirements for quality management in measurement and evaluation of vibration

CU-NC, Principle of Mechanical Shock

NC 09-00-01-1986 Unified Elements System of Molds, Dies, Stampers and Machina Devices. General Principies
NC 09-00-02-1986 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Coding of Unified Elements Supply
NC 09-01-104-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Moulds Threaded Inserts without Springs. Design Specifications
NC 09-02-06-1988 Unified Element Systern of Moulds, Dies, Stampers and Machining Devices. Dies. Bases for Dies Frameworks with Axial Layout of Guide Elements Design Specifications
NC 09-02-05-1986 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Dies Frameworks
NC 09-02-82-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Dies. Dies for Píate Stamping. General Quality Specifications
NC 09-02-77-1986 Unified Elements System of Molds, Dies, Stampers and Machine Devices. Dies Retainer Ring. Design Specifications
NC 09-02-78-1986 Unified Elements System of Molds, Dies, Stampers and Machine Devices. Dies. Spacer Ring. Design Specifications
NC 09-02-81-1986 Unified Elements System Of Molds, Dies, Stampers and Machine Devices. Dies. Safety Cover. Design Specifications
NC 09-04-96-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Locating Pins Design Specifications
NC 09-04-76-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Oscillating Clamp. Design Specifications
NC 09-04-80-1987 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining DeVice. Rocking Arm. Design Specifications
NC 09-02-10-1986 UESMDSMD. Dies. Framework Bases with Rectangular Working Surfaces with the Bigger Edge Backward Oriented and Rear Location of Guide Elements. Design Specifications
NC 09-02-60-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Dies. Separating Washer. Design Specifications
NC 09-02-79-1986 Unified Elements System of Molds, Dies, Stampers and Machine Devices. Dies Supports for Guide Bushes. Design Specifications
NC 09-04-83-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Double Action Clamp Design Specifications
NC 09-04-33-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. ?djustable Support. Design Specifications
NC 09-04-74-1987 Unified Elements System of Molds, Dies; Stampers and Devices. Machining Device. Lowering Washer. Design Specifications
NC 09-04-73-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Fast Action Washer. Design Specifications
NC 09-04-42-1987 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining Device. Star Handle. Design Specifications
NC 09-04-102-1988 Unified Elements System of Moulds, Dies, Stampers and Machiníng Devices. Machining Device. Slotted Nut. Design Specifications
NC 09-04-75-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Extractor Washer. Design Specifications
NC 09-04-81-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Fixation Hook. Design Specifications
NC 09-04-94-1988 Unified Elements System of Monlds, Dies, Stamoers and Machiining Devices. Centering Chuck. Design Specifications
NC 09-04-39-1987 Univied Elements System of Moulds, Dies, Stampers and Machining Devices. Angled Lateral Fixing Plate. Design Specifications
NC 09-04-100-1988 Unified Element System of Moulds, Dies Stampers and machining Devices. Machining Devices. Spheric Support. Design Specifications
NC 09-04-68-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Devices. Hook Bolt. Design Specifications
NC 09-04-115-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Devices Oscillating Clamp Plate Design Specifications
NC 09-04-30-1985 Unified Elements System of Molds, Dies, Stampers and Machining Devices Machining Device. Bearing Washer for Locating Pins. Main Dimensions and Design Specifications
NC 09-04-101-1988 Unified Elements System of Moulds, Dies, Stampers and Macinig Devices. Machining Device. Milled Ring Nuts Design Specifications
NC 09-04-67-1987 Unified. Elements System of Moulds, Dies, Stampers and Machining Devices. Echeloned Screw. Design Specifications
NC 09-04-78-1987 Unified Elements System of Moulds, Dies, Starapers and Machining Devices. Displaceable Elbowed Clarap. Design Specifications
NC 09-04-89-1987 Unified Elements System of Molds, Dies, Starapers and Devices. Machining Device. Changeable Bushing. Design Specifications
NC 09-04-41-1987 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining Device. Cylindrical Gage. Design Specifications
NC 09-04-40-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Flat Gage. Design Specifications
NC 09-04-99-1988 Unified Elements System of Moulds, Dies, Stampers, and Machining Devices. Machining Devices. Screws with Bead. Design Specifications
NC 09-04-98-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Devices, Bushings for Locating Pins. Design Specifications
NC 09-04-82-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Fixation Hook Bushing Design Specifications
NC 09-04-93-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Devices. Echeloned Alignment Key. Design Specifications
NC 34-57-1988 Agricultural Machineries and Implements. Agricultural Machines and Tractors Conservation
NC 09-02-74-1988 Uhified Elements System of Mbulds, Dies, Stampers and Machining Devices. Dies Separating Slotted Screw Design Specifications
NC 09-04-36-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Cylindrical Fixing Píate. Design Specifications
NC 09-04-79-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Displaceable Oscillating Clamp. Design Specifications
NC 09-04-37-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Device. Machining Device. Rectangular Fixing Píate. Design Specifications
NC 09-02-63-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Dies Safety Hexagonal Nuts Design Specifications
NC 09-04-31-1985 Unified Elements System of Molda, Dies, Stampers and Machining Devices. Machining Device. Bearing Píate for Smooth Eccentric or Screws. Main Dimensions and Design Specifications
NC 09-04-32-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Plain or Grooved Support Plates. Design Specifications
NC 09-04-88-1987 Unified Elements System of Molds, Dies, Stampers and Devices. Machining Device Fixed Bushing with Ledges Design Specifications
NC 09-04-71-1986 Unified Elements System of Molcis, Dies, Stampers and Machine Devioes. Machine Device. Looation Interchangeable Cylindrical Shank. Design Specifications
NC 09-04-72-1986 Unified Elements System of Molds. Dies, Stampers and Machine Devices. Machine Device. Location Interchangeable Cut Shank. Design Specifications
NC 09-04-104-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Devices. Adjusting Slotted Screw. Design Specifications
NC 09-04-109-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Devices Spheric ot Plain Flange Square Nut. Design Specifications
NC 09-04-12-1985 Unified Elements System of Molds. Dies, Stampers and Devices. Travelling Lever Main Dimensions
NC 09-04-34-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Adjustable Support with Hexagonal Head. Design Specifications
NC 09-02-85-1986 Unifiod Elements System of Molds. Dies, Stampers and Machine Devices. Diejs. Guide Bushes for Echeloned Guide Columns. Design Specifications
NC 34-65-1989 Agricultural Machineries and Implentents. Mowing Machines and Methodology for Tests Realization
NC 09-01-131-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Moulds. Antechamber Nozzles: Design Specifications
NC 09-01-129-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Moulds Round Bases. Main Dimensions
NC 09-01-130-1988 Unified Eiements System of Moulds, Dies, Stampers and Machining Devices. Moulds Antechamber Nozzle Ends Design Specifications
NC 09-01-106-1987 Unified Elements System of Moulds , Dies, Stampers and Machining Devices. Moulds Round Plates. Design Specifications
NC 09-04-29-1985 Unified Elements System of Molds, Dies, Stampers and Machining Machining Devices. Machining Devices. Bearing Washer. Main Dimensions and Design scpecifications
NC 09-04-24-1985 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining Device. Spherical Washer Main Dimensions. Design Specifications
NC 09-04-22-1985 Unified Elements System of Molds, Dies, Stampers and_ Machining Devices. Machining, Device. Eccentric for LeVer br Axis. Main Dimensions. Design Specifications
NC 09-04-25-1985 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining Device. Conical Washer. Main Dimensions. Design Specifications
NC 09-04-21-1985 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining Device. Threaded Cap. Main Dimensions and Design Specifications
NC 09-04-97-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Devices. Bushes for Indexes and Locating Pins with Bead. Design Specifications
NC 34-61-1988 Agricultural Machineries and Implements. Agricultural Machines and Tractors. General Requirements for Its Exploitation

PT-IPQ, Principle of Mechanical Shock

NP EN 1299-2002 Mechanical vibration and shock Vibration isolation of machines - Information for the application of source isolation

Danish Standards Foundation, Principle of Mechanical Shock

DS/ISO 5348:1993 Mechanical vibration and shock. Mechanical Mounting of accelerometers
DS/ISO 5348:1999 Mechanical vibration and shock - Mechanical mounting of accelerometers
DS/ISO 5348:2021 Mechanical vibration and shock – Mechanical mounting of accelerometers
DS/ISO 5982:1983 Vibration and shock. Mechanical driving point impedance of the human body
DS/ISO 10068:2013 Mechanical vibration and shock - Mechanical impedance of the human hand-arm system at the driving point
DS/EN 60749-10/Corr.1:2004 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock
DS/EN 60749-10:2003 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock
DS/EN ISO 13090-1:1999 Mechanical vibration and shock - Guidance of safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock
DS/EN 62364:2013 Hydraulic machines - Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines
DS/EN 1299+A1:2009 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
DS/CEN ISO/TS 15694:2004 Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
DS/ISO 18437-2/Amd. 1:2011 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 2: Resonance method
DS/ISO 18437-2:2011 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 2: Resonance method
DS/EN 1621-1:2013 Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods
DS/EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
DS/ISO 2631-5:2004 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 5: Method for evaluation of vibration containing multiple shocks
DS/EN 50102/Corr. - 62262:2007 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
DS/EN 50102/A1 - 62262:2000 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
DS/EN 50102 - 62262:1997 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
DS/EN 62262:2021 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
DS/EN 3841-507:2005 Aerospace series - Circuit breakers - Test methods - Part 507: Mechanical shocks

Association Francaise de Normalisation, Principle of Mechanical Shock

NF E90-152:1983 Mechanical vibrations and schocks . Mechanical mounting of accelerometers.
NF E90-002:1984 Vibrations et chocs mécaniques - Vocabulaire de l'équilibrage
NF T51-035-1*NF EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1 : non-instrumented impact test
NF E90-601:1986 Mechanical vibration and shock. Balancing machines. Description and evaluation.
NF E90-001*NF ISO 2041:2019 Mechanical vibration, shock and condition monitoring - Vocabulary
NF E90-003*NF ISO 5805:2015 Mechanical vibration and shock - Human exposure - Vocabulary
NF ISO 2041:2019 Vibrations et chocs mécaniques, et leur surveillance - Vocabulaire
NF ISO 5805:2015 Vibrations et chocs mécaniques - Exposition de l'individu - Vocabulaire
FD CEN ISO/TS 15694:2004 Vibrations et chocs mécaniques - Mesurage et évaluation des chocs simples transmis par les machines portatives et guidées à la main au système main bras
NF E90-454*NF EN 1299+A1:2009 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
NF C96-022-10*NF EN 60749-10:2002 Semiconductor devices - Mechanical and climatic test methods - Part 10 : mechanical shock
NF ISO 8569:1996 Vibrations et chocs mécaniques - Mesurage et évaluation des effets des chocs et des vibrations sur les équipements sensibles dans les bâtiments
NF EN IEC 62364:2019 Machines hydrauliques - Lignes directrices relatives au traitement de l'érosion hydro-abrasive des turbines Kaplan, Francis et Pelton
NF E90-510*NF ISO 8569:1996 Mechanical vibration and shock. Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings.
NF E90-010:2007 Mechanical vibration and shock - Coupling forces at the machine-man interface for hand-transmitted vibration.
NF A03-520:1985 Iron and steel - Guide for checking mechanical testing machines (tension - impact - hardness).
NF EN ISO 13090-1:1999 Vibrations et chocs mécaniques - Lignes directrices concernant les aspects de sécurité des essais et des expérimentations réalisées sur des sujets humains - Partie 1 : exposition de l'ensemble du corps aux vibrations mécaniques et aux chocs ré...
NF E90-405-1*NF EN ISO 13090-1:1999 Mechanical vibration and shock. Guidance on safety aspects of tests and experiments with people. Part 1 : exposure to whole-body mechanical vibration and repeated shock.
NF EN 1299/IN1:2009 Vibrations et chocs mécaniques - Isolation vibratoire des machines - Informations pour la mise en oeuvre de l'isolation des sources
NF EN 1299+A1:2009 Vibrations et chocs mécaniques - Isolation vibratoire des machines - Informations pour la mise en oeuvre de l'isolation des sources
NF EN 60512-7-2:2012 Connecteurs pour équipements électroniques - Essais et mesures - Partie 7-2 : essais d'impact (fiches)- Essai 7b : résistance mécanique aux chocs
FD E90-694*FD CEN ISO/TS 15694:2004 Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
NF S74-538-1:1998 Motorcyclists' protective clothing against mechanical impact. Part 1 : requirements and test methods for impact protectors.
NF E90-014*NF ISO 21289:2008 Mechanical vibration and shock - Parameters to be specified for the acquisition of vibration data.
NF E90-600:1985 Mechanical vibrations and shocks. Balancing criteria of rotors in a rigid state.
NF E90-630*NF ISO 8727:2016 Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems
NF ISO 14963:2004 Vibrations mécaniques et chocs - Lignes directrices pour les essais dynamiques des ponts et viaducs
NF ISO 8727:2016 Vibrations et chocs mécaniques - Exposition de l'individu - Systèmes de coordonnées biodynamiques
NF EN IEC 60749-10:2022 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 10 : Chocs mécaniques - Dispositif et sous-ensemble
NF E90-454/IN1*NF EN 1299/IN1:2009 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
NF ISO 2631-5:2020 Vibrations et chocs mécaniques - Évaluation de l'exposition des individus à des vibrations globales du corps - Partie 5 : méthode d'évaluation des vibrations contenant des chocs répétés
NF E90-100:1985 Mechanical vibration and shock. Vibrations of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity.
NF E90-501:1984 Mechanical vibration and shock. Specifying characteristics for mechanical isolation. Guide for selecting and applying resilient isolators.
NF C93-400-7-2*NF EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2 : impact Tests (free connectors)- Test 7b : mechanical strength impact
NF E90-631-5*NF ISO 2631-5:2020 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 5 : method for evaluation of vibration containing multiple shocks
NF C20-015*NF EN 62262:2004 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK codes).
NF L58-405-507*NF EN 3841-507:2005 Aerospace series - Circuits breakers - Test methods - Part 507 : mechanical shocks
NF C20-015/A1*NF EN 62262/A1:2021 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

RU-GOST R, Principle of Mechanical Shock

GOST R ISO 5348-1999 Mechanical vibration and shock. Mechanical mounting of accelerometers
GOST R ISO 18437-1-2014 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 1. General principles
GOST R ISO 28927-10-2013 Mechanical vibration. Evaluation of vibration emission of hand-held power tools. Part 10. Percussive drills, hammers and breakers
GOST R ISO 8042-1999 Mechanical vibration and shock. Seismic transducers for shock and vibration measurements. Characteristics to de specified
GOST ISO 5348-2002 Vibration and shock. Mechanical mounting of accelerometers
GOST 16271-1970 Damping devices of percussion hand machines. Technical requirements
GOST R ISO 13372-2013 Mechanical vibration, shock and condition monitoring. Terms and definitions
GOST R ISO 10068-2015 Mechanical vibration and shock. Data on the mechanical impedance of the human hand-arm system at the driving point
GOST R 59368.5-2021 Mechanical vibration and shock. Experimental determination of mechanical mobility. Part 5. Measurements using impact excitation with an exciter which is not attached to the structure
GOST R 53190-2008 Environmental dynamic test methods for machines, instruments and other technical articles. Shock tests with shock response spectrum synthesis
GOST R ISO 16063-13-2012 Mechanical vibration. Methods for the calibration of vibration and shock transducers. Part 13. Primary shock calibration using laser interferometry
GOST 31418-2010 Environmental dynamic test methods for machines, instrument and other technical articles. Shock tests with shock response spectrum synthesis
GOST R ISO 16063-22-2012 Vibration. Methods for the calibration of vibration and shock transducers. Part 22. Shock calibration by comparison to a reference transducer
GOST R ISO 18437-2-2014 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 2. Resonance method
GOST ISO 7626-5-1999 Vibration and shock. Experimental determination of mechanical mobility. Part 5. Measurements using impact excitation with an exciter which is not attached to the structure
GOST R ISO 18437-4-2014 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 4. Dynamic stiffness method

Group Standards of the People's Republic of China, Principle of Mechanical Shock

T/CIE 117-2021 MEMS device mechanical shock test method

Society of Automotive Engineers (SAE), Principle of Mechanical Shock

SAE J1460-2013 Human Mechanical Response Characteristics
SAE J1460-1-2012 Human Mechanical Impact Response Characteristics Dynamic Response of the Human Abdomen
SAE J1460-1-2000 Human Mechanical Impact Response Characteristics - Dynamic Response of the Human Abdomen

American National Standards Institute （ANSI), Principle of Mechanical Shock

ANSI/EIA 364-27B:1996 Electric Connectors - Mechanical Shock (Specified Pulse) Test Procedure
ANSI/ASA S2.1-2009 Mechanical vibration, shock and condition monitoring - Vocabulary
ANSI/EIA 364-27C:2011 Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors and Sockets

ZA-SANS, Principle of Mechanical Shock

SANS 2041:2009 Mechanical vibration, shock and condition monitoring - Vocabulary

Professional Standard - Agriculture, Principle of Mechanical Shock

GB 6552-1986 Test method for resistance to mechanical shock of glass bottles
GB 8171-1987 Test method for mechanical impact brittleness of products using cushioning packaging materials

ES-UNE, Principle of Mechanical Shock

UNE-ISO 5805:2017 Mechanical vibration and shock -- Human exposure – Vocabulary.
UNE-ETS 300436-3 Ed1:2022 Space engineering - Mechanical shock design and verification handbook (Endorsed by Asociación Española de Normalización in August of 2022.)
UNE-CEN/TR 17603-32-25:2022 Space engineering - Mechanical shock design and verification handbook (Endorsed by Asociación Española de Normalización in August of 2022.)
UNE-EN IEC 60749-10:2022 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - device and subassembly (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (Endorsed by AENOR in April of 2012.)

European Committee for Standardization (CEN), Principle of Mechanical Shock

EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
EN 10045-1:1990 Metal Products, Mechanical Tests, Charpy Impact Tests, Test Specimens, Testing Conditions
EN ISO 13090-1:1998 Mechanical Vibration and Shock - Guidance on Safety Aspects of Tests and Experiments with People - Part 1: Exposure to Whole-Body Mechanical Vibration and Repeated Shock ISO 13090-1:1998
EN 1299:1997 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation (Incorporates Amendment A1: 2008)
CEN ISO/TS 15694:2004 Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system (ISO/TS 15694:2004)

ECIA - Electronic Components Industry Association, Principle of Mechanical Shock

EIA-364-27B-1996 TP-27B Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors
EIA-364-27C-2011 TP-27C MECHANICAL SHOCK (SPECIFIED PULSE) TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS

国家市场监督管理总局、中国国家标准化管理委员会, Principle of Mechanical Shock

GB/T 29716.3-2021 Mechanical vibration and shock—Signal processing—Part 3: Methods of time-frequency analysis

IN-BIS, Principle of Mechanical Shock

IS 9474-1980

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Principle of Mechanical Shock

IPC TM-650 2.6.5-2004 Physical Shock, Multilayer Printed Wiring Revision D
IPC TM-650 3.8-1975 Mechanical Shock, Connectors; Revision A - July 1975

PL-PKN, Principle of Mechanical Shock

PN E04160-24-1991 Electric cables Methods of testing Mechanical shocks tests
PN M77300 ArkusZ13-1973 Kinde and method ot enemal-coating Determination ot resistans to mechanical shock
PN W01351-1992 Mechanical vibration and shock. Guidelines for the overall evaluation of vibration in merchant ships

Acoustical Society of America (ASA), Principle of Mechanical Shock

ASA S2.1-2009 American National Standard Mechanical vibration, shock and condition monitoring - Vocabulary
ASA S3.32-1982 Mechanical Vibration and Shock Affecting Man - Vocabulary ASA 43-1982 R(1999)

工业和信息化部, Principle of Mechanical Shock

JB/T 13972-2020 Building construction machinery and equipment vibration impact rammers

Electronic Components, Assemblies and Materials Association, Principle of Mechanical Shock

ECA EIA-364-27B-1996 TP-27B Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors

Professional Standard - Machinery, Principle of Mechanical Shock

JB/T 12837-2016 Test method for ultra-micro grinding equipment of mechanical impact type
JB/T 9444.6-1999 Basic environmental testing method of copying machines - Test Ea: Bump test

VN-TCVN, Principle of Mechanical Shock

TCVN 4627-1988 Agricultural machine.Principles of prototype management
TCVN 7335-2004 Mechanical vibration and shock.Disturbance to human activity and performance.Classification

AENOR, Principle of Mechanical Shock

UNE-EN 60749-10:2003 Semiconductor devices - Mechanical and climatic test methods -- Part 10: Mechanical shock.
UNE-EN 1299:1997+A1:2009 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
UNE-EN 1621-1:2013 Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods
UNE-CEN ISO/TS 15694:2013 EX Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system (ISO/TS 15694:2004)
UNE-EN ISO 13090-1:1999 MECHANICAL VIBRATION AND SHOCK. GUIDANCE ON SAFETY ASPECTS OF TESTS AND EXPERIMENTS WITH PEOPLE. PART 1: EXPOSURE TO WHOLE-BODY MECHANICAL VIBRATION AND REPEATED SHOCK (ISO 13090-1:1998)

HU-MSZT, Principle of Mechanical Shock

TR-TSE, Principle of Mechanical Shock

TS 2776-1977 VIBRATION AND SHOCK - ISOLATORS - SPECIFYING CHARACTERISTICS FOR MECHANICAL ISOLATION

GOSTR, Principle of Mechanical Shock

GOST R ISO 2041-2012 Mechanical vibration, shock and condition monitoring. Terms and definitions
GOST 7268-1982 Steel. Method for determination of ability to mechanical ageing by impact bend testing

Military Standard of the People's Republic of China-General Armament Department, Principle of Mechanical Shock

GJB 1446.62-1992 Ship system interface requirements mechanical environment impact environment

Professional Standard - Electron, Principle of Mechanical Shock

SJ 20115.7-1992 Environmental conditions and test methods for aircraft radar.Mechanical shock test

Taiwan Provincial Standard of the People's Republic of China, Principle of Mechanical Shock

CNS 9054-1982 Testing Method of Vibration and Shock for Construction Machinery Gauges
CNS 8217-1986 Method of Test for Low Frequency (Below 3 MHz) Electrical Connectors (TP - 27 Mechanical Shock Specified Pulse)

Lithuanian Standards Office , Principle of Mechanical Shock

LST ISO 5805:2004 Mechanical vibration and shock. Human exposure. Vocabulary (idt ISO 5805:1997)
LST EN ISO 13090-1:2001 Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998)
LST EN 1299-2001+A1-2009 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
LST EN 60749-10-2003 Semiconductor devices. Mechanical and climatic test methods. Part 10: Mechanical shock (IEC 60749-10:2002)
LST EN 1621-1-2013 Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods
LST EN 50102+A1-1998 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
LST EN 3841-507-2005 Aerospace series - Circuit breakers - Test methods - Part 507: Mechanical shocks

IT-UNI, Principle of Mechanical Shock

UNI 4431-1960

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Principle of Mechanical Shock

GJB 5491.20-2005 Test method of terminally guided projectile Part 20:Mechanical shock test
GJB 5895.25-2006 Test method for anti-tank missile Part 25: Mechanical shock test

SAE - SAE International, Principle of Mechanical Shock

SAE J1460/1-2012 Human Mechanical Impact Response Characteristics - Dynamic Response of the Human Abdomen
SAE J1460-1-1995 Human Mechanical Impact Response Characteristics - Dynamic Response of the Human Abdomen

European Committee for Electrotechnical Standardization（CENELEC）, Principle of Mechanical Shock

EN IEC 60749-10:2022 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - Device and subassembly
EN 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

United States Navy, Principle of Mechanical Shock

NAVY MIL-S-901 D-1989 SHOCK TESTS, H.I. (HIGH-IMPACT) SHIPBOARD MACHINERY, EQUIPMENT, AND SYSTEMS, REQUIREMENTS FOR

European Association of Aerospace Industries, Principle of Mechanical Shock

AECMA PREN 3841-507-1998 Aerospace Series Circuit Breakers Test Methods Part 507 : Mechanical Shocks Edition P 2
AECMA PREN 3841-507-1996 Aerospace Series Circuit Breakers Test Methods Part 507 : Mechanical Shocks Edition P 1
AECMA PREN 3841-507-2003 Aerospace Series Circuit Breakers Test Methods Part 507: Mechanical Shocks Edition P 3