Strength Scratch Tester

Strength Scratch Tester, Total:236 items.

In the international standard classification, Strength Scratch Tester involves: Plastics, Structure and structure elements, Reinforced plastics, Mechanical testing, Surface treatment and coating, Construction materials, Non-ferrous metals, Graphic technology, Road vehicles in general, Iron and steel products, Paints and varnishes, Dentistry, Ceramics, Corrosion of metals, Geology. Meteorology. Hydrology, Testing of metals, Construction industry, Metrology and measurement in general, Transport, Road engineering, Electrical wires and cables, Linear and angular measurements, Acoustics and acoustic measurements, Protection of and in buildings, Equipment for the paper industry, Measurement of volume, mass, density, viscosity, Construction equipment, Mining equipment, Insulating materials, Measurement of force, weight and pressure, Products of the textile industry, Terminology (principles and coordination), Equipment for the chemical industry, Rubber, Farming and forestry, Leather technology, Quality, Electricity. Magnetism. Electrical and magnetic measurements, Non-destructive testing, Fibre optic communications, Technical drawings, Optical equipment, Products of the chemical industry, Paint ingredients, General methods of tests and analysis for food products, Analytical chemistry, Radiation measurements.

National Metrological Technical Specifications of the People's Republic of China, Strength Scratch Tester

JJF(石化) 009-2018 Calibration Specification for Scratch Testers
JJF(石化)009-2018 Calibration Specification for Scratch Testers
JJF 1372-2012 Calibration Specification for Instrument of Testing Mortar-strength by Penetration Resistance Method
JJF(机械) 1039-2020 Calibration specification for molding sand hot-wet tensile strength tester
JJF(机械) 1062-2021 Calibration specification for insulating oil dielectric strength tester
JJF(机械) 1075-2021 Calibration specification for single particle compressive strength tester
JJF(机械)1039-2020 Calibration specification for molding sand hot-wet tensile strength tester
JJF(机械)1062-2021 Calibration specifications for insulating oil dielectric strength tester
JJF(机械)1075-2021 Calibration specifications for single particle compressive strength tester

Korean Agency for Technology and Standards (KATS), Strength Scratch Tester

KS M ISO 17541:2016 Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS M ISO 17541-2016(2021) Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS D 0294-2009 Standard method for the evaluation of repassivation rate of stainless steel components using laboratory scratch test
KS P ISO TS 20746:2019 Dentistry — Determination of the strength of dental amalgam by the Hertzian indentation strength(HIT) method
KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
KS B ISO 14577-3:2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS B ISO 10110-4:2007 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 4：Material imperfections－Inhomogeneity and striae
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale

American Society for Testing and Materials (ASTM), Strength Scratch Tester

ASTM F548-09 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-03a Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-03 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-19 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F428-19 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F548-01 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-81(1994)e1 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-03ae1 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F428-83(1997)e1 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-03 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-83(1997)e2 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-01 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM D7027-20 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM C1895-20 Standard Test Method for Determination of Mohs Scratch Hardness
ASTM B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM F2496-05 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
ASTM F2496-05(2011)e1 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
ASTM B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM C1895-19 Standard Test Method for Determination of Mohs Scratch Hardness of Ceramic Tile
ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM C1624-05 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM B647-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM F428-03a Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM G171-03 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G171-03(2009)e1 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM F428-09 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-09(2014) Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F548-09(2014) Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM G171-03(2017) Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G171-03(2009)e2 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM C1624-22 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM C1624-05(2015) Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D7027-13 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D3786/D3786M-18(2023) Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D7187-20 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM E2911-23 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM E2911-13 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM G183-15(2023) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
ASTM B724-00 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument

Lithuanian Standards Office , Strength Scratch Tester

LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
LST EN 15771-2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale

工业和信息化部/国家能源局, Strength Scratch Tester

JB/T 12721-2016 Technical specifications for in-situ nanoindentation/scratch tester for solid materials

Danish Standards Foundation, Strength Scratch Tester

DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
DS/EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
DS/EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method

CZ-CSN, Strength Scratch Tester

CSN 72 5126-1987 Determination of scratch hardness of surface accordíng to Mohs
CSN ISO 2759:1993 Board. Determination of bursting strength
CSN EN 101-1994 Ceramic floor and wall tiles.Determination of scratch hardness of surface according to Mohs
CSN 50 0344-1988 Board testing. ursting strength (Schopper-Dalen appa- atus)

Japanese Industrial Standards Committee (JISC), Strength Scratch Tester

JIS K 7317:2022 Plastics -- Determination of scratch hardness of specialty films
JIS C 6184:1993 Test methods of optical power meters for optical fiber
JIS R 1760:2016 Test method for fracture resistance of fine ceramics at room temperature by indentation fracture (IF) method

BE-NBN, Strength Scratch Tester

NBN-EN 101-1992 Ceramic tiles - Determination of scratch hardness of surface according to Mohs

RO-ASRO, Strength Scratch Tester

STAS SR EN 101-1994 Ceramic tiles. Determination of scratch hardness of surface according to Mohs

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Strength Scratch Tester

GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film
GB/T 42665-2023 Test method for spherical indentation strength of porous ceramics
GB/T 37782-2019(英文版) "Metallic materials—Indentation test—Determination of strength,hardness and stressstrain curve"
GB/T 30410-2013 Leather machines.Leather bursting strength tester
GB/T 6688-2008 Dyestuffs.Determination of relative strength and color difference.Instrumental method
GB/T 21838.1-2008 Metallic materials.Instrumented indentation test for hardness and materials parameters.Part 1:Test method

PL-PKN, Strength Scratch Tester

PN B12038-06-1987 Ceramic tiles Determination of scratch hardness of surface according to Mohs
PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus

ES-UNE, Strength Scratch Tester

UNE-CEN/TS 17629:2021 Nanotechnologies - Nano- and micro- scale scratch testing (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN ISO 6769:2023 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
UNE-EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
UNE-EN ISO 14577-1:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)

AENOR, Strength Scratch Tester

UNE-EN 15771:2011 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale

British Standards Institution (BSI), Strength Scratch Tester

BS EN ISO 6769:2022 Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
PD ISO/TS 20746:2016 Dentistry. Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
BS PD ISO/TS 20746:2016 Dentistry. Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
BS EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
22/30436770 DC BS ISO 6769. Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
BS ISO 19207:2016 Thermal spraying. Classification method of adhesive strength by indentation
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN 59:2016 Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester
BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks

AT-ON, Strength Scratch Tester

ONORM EN 101-1992 Ceramic tiles - Determination of Scratch hardness of surface according to Mohs
ONORM EN 59-1978 Glass reinjorced plastics. Measu.rem.ent of hardness by means of a barcol-impressor

European Committee for Standardization (CEN), Strength Scratch Tester

EN 101:1984 Ceramic Tiles: Determination of Scratch Hardness of Surface According to Mohs
EN ISO 6769:2022 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
prEN ISO 14577-1 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method

Association Francaise de Normalisation, Strength Scratch Tester

XP CEN/TS 17629:2021 Nanotechnologies - Essais de rayure aux échelles nano- et micro métriques
NF A91-218*NF ISO 19207:2016 Thermal spraying - Classification method of adhesive strength by indentation
NF A92-129*NF EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale.
NF EN 59:2016 Matières plastiques renforcées de verre - Détermination de la dureté par pénétration au moyen d'un appareil d'essai de dureté Barcol
NF EN ISO 22557:2020 Peintures et vernis - Essai de rayage manuel avec un stylo d'essai de dureté
NF T57-106*NF EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
NF EN ISO 19399:2017 Peintures et vernis - Détermination de l'épaisseur par la méthode d'entaille en coin (Méthode de rayer et de forage)
NF T46-055*NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
NF T57-106:1977 Glass reinforced plastics. Measurement of hardness by means of a barcol impressor .
NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.
NF X80-003:2008 Conservation des biens culturels - Méthodes d'essai - Évaluation de l'effet d'un traitement sur les matériaux inorganiques poreux par la mesure de la largeur de la rayure
NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method
NF A03-155-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.

International Organization for Standardization (ISO), Strength Scratch Tester

ISO 6769:2022 Vitreous and porcelain enamels — Determination of surface scratch hardness according to the Mohs scale
ISO/TS 20746:2016 Dentistry - Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement
ISO 19207:2016 Thermal spraying - Classification method of adhesive strength by indentation
ISO/DTS 19096 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO/TS 19096:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 10110-4:1997 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 4: Material imperfections - Inhomogeneity and striae
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO/CD 14577-1:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method

Society of Automotive Engineers (SAE), Strength Scratch Tester

SAE J2340-1999 Categorization and Properties of Dent Resistant, High Strength, and Ultra High Strength Automotive Sheet Steel

SAE - SAE International, Strength Scratch Tester

SAE J2340-2017 Categorization and Properties of Dent Resistant@ High Strength@ and Ultra High Strength Automotive Sheet Steel

YU-JUS, Strength Scratch Tester

JUS EN 101-1991 Ceramic tiles. Determination of scratch hardness of surface according to Mohs
JUS F.S2.242-1984 Cotton fibres. Test method for braaking strength. Pretsley apparatus

RU-GOST R, Strength Scratch Tester

GOST 21318-1975 Measurement of microhardness by scratch diamond instruments
GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness
GOST R 51274-1999 Vessels and apparatus. Apparatus of column type. Norms and methods of strength calculation
GOST 4.385-1985 Product-quality index system. Meters for mognetic induction and meters for magnetic flux. Index nomenclature
GOST 22091.15-1986 X-ray devices. The method of electric strenght test
GOST R 51273-1999 Vessels and apparatus. Norms and methods of strength calculation. Rated strength calculation of column type apparatus from wind loads and seismic influence

German Institute for Standardization, Strength Scratch Tester

DIN 55656:2014 Paints and varnishes - Scratch test using a hardness pen
DIN EN ISO 6769:2023 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
DIN EN 59:2016-06 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
DIN VDE 0472-619:1983 Testing of cables, wires and flexible cords; indentation strength VDE Specification
DIN 57472-619:1983 Testing of cables, wires and flexible cords; indentation strength [VDE Specification]
DIN EN ISO 6769:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 527-4:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 4491-1:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 5179:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 19979:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale; German version EN 15771:2010
DIN ISO 10110-4:2000 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 4: Material imperfections; inhomogenity and striae (ISO 10110-4:1997)
DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
DIN EN 59:1977 Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor

未注明发布机构, Strength Scratch Tester

DIN 55656 E:2013-03 Paints and varnishes - Scratch test using a hardness pen
DIN EN ISO 6769 E:2022-02 Determination of surface scratch hardness of enamels and glazes according to Mohs hardness scale (draft)
DIN EN 59 E:2014-04 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
DIN EN 59 E:2015-03 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
DIN EN ISO 14577-3 E:2012-03 Instrumental indentation testing of metallic materials hardness and material parameters Part 3: Calibration of hardness standard blocks (draft)
DIN EN ISO 14577-1 E:2012-03 Instrumental indentation testing of metallic materials for hardness and material parameters Part 1: Test methods (draft)

KR-KS, Strength Scratch Tester

KS P ISO TS 20746-2019 Dentistry — Determination of the strength of dental amalgam by the Hertzian indentation strength(HIT) method

Jilin Provincial Standard of the People's Republic of China, Strength Scratch Tester

DB22/T 2974-2019 Lightning Comprehensive Intensity Classification

Professional Standard - Light Industry, Strength Scratch Tester

QB/T 1052-1991 Incipient wet strength tester
QB 1048-1991 Compression Strength Tester
QB/T 1664-2012 Board puncture resistance tester
QB/T 1664-1998 Cardboard Puncture Strength Tester

轻工业部, Strength Scratch Tester

QB 1052-1991 Initial wet strength tester

(U.S.) Ford Automotive Standards, Strength Scratch Tester

FORD WSS-M6J175-A-1997 PRIMER SURFACER, 130 C BAKING TEMPERATURE, CHIP AND SCRATCH INHIBITING, REPAIR PARTS
FORD WSS-M6J175-A2-1997 PRIMER SURFACER, 130 C BAKING TEMPERATURE, CHIP AND SCRATCH INHIBITING, FULL BODIES (Shown on WSS-M6J175-A)

US-FCR, Strength Scratch Tester

FCR COE CRD-C 130-01-2001 STANDARD RECOMMENDED PRACTICE FOR ESTIMATING SCRATCH HARDNESS OF COARSE AGGREGATE PARTICLES

Shandong Provincial Standard of the People's Republic of China, Strength Scratch Tester

DB37/T 5169-2020 Technical specification for testing the strength of building steel by imprint method
DB37/T 2418-2013 Electronic pavement material strength tester

Group Standards of the People's Republic of China, Strength Scratch Tester

T/ZZXJX 299-2023 Technical regulations for testing the strength of construction steel using the impression method
T/HBMIF 005-2022 Technical requirements for ground strength detector
T/GIEHA 044-2023 Evaluation method of odor intensity of automobile interior decoration using olfactory discriminator

SE-SIS, Strength Scratch Tester

SIS SS 24 21 23-1982 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
SIS SS 16 84 05-1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol im pressor

Professional Standard - Traffic, Strength Scratch Tester

JT/T 832-2012 LED luminous intensity tester
JT/T 943-2014 Testing apparatus for pavement material strength
JT/T 117-1993 Specifications for the strenth tester of the stablized soil

工业和信息化部, Strength Scratch Tester

QB/T 5558-2020 Internal bonding strength meter (Scott type)

American National Standards Institute （ANSI), Strength Scratch Tester

ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ANSI S1.9-1996 Instruments for the Measurement of Sound Intensity
ANSI/ASTM D3554:2007 Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable

Anhui Provincial Standard of the People's Republic of China, Strength Scratch Tester

DB34/T 1592-2012 Classification of short-term approaching rainfall intensity

Qinghai Provincial Standard of the People's Republic of China, Strength Scratch Tester

DB63/T 2048-2022 Classification of short-term approaching rainfall intensity

Professional Standard - Earthquake, Strength Scratch Tester

DB/T 10-2001 Digital strong motion accelerograph
DB/T 10-2016 Digital Strong Vibration Accelerometer
DB/T 28-2008 Calibration code of measuring instruments for magnetic induction of low field

Professional Standard - Construction Industry, Strength Scratch Tester

JG/T 507-2016 Digital sticking strength tester
JG 3056-1999 Digital sticking strength tester

Professional Standard - Coal, Strength Scratch Tester

MT/T 1060-2008 Concrete strength testing in strument in coal mine

国家安全生产监督管理总局, Strength Scratch Tester

MT/T 1060-2007 Mining concrete strength tester

IN-BIS, Strength Scratch Tester

IS 13630 Pt.13-1993 Ceramic tiles. Methods of test. Part 13: Determination of scratch hardness of surface according to mohs

Professional Standard - Machinery, Strength Scratch Tester

JB/T 9318-1999 Geodetic instruments-circle graduations of visual reading
JB/T 6247-1992 Bending strength at high temperature of shell - Tester

Jiangsu Provincial Standard of the People's Republic of China, Strength Scratch Tester

DB32/T 4653-2024 Continuous rain intensity index and risk level classification

GM Daewoo, Strength Scratch Tester

GMKOREA EDS-T-2118-2010 Pedal Mounting and Dashboard Strength

Indonesia Standards, Strength Scratch Tester

SNI 08-4648-1998 Test method for seam strength of knitted fabrics by bursting strength tester (diaphragm method )

National Metrological Verification Regulations of the People's Republic of China, Strength Scratch Tester

JJG(纺织) 059-1995 Textile Bursting Strength Tester Verification Regulations
JJG(机械) 7-1990 Verification rules for single particle compressive strength tester

Xinjiang Provincial Standard of the People's Republic of China, Strength Scratch Tester

DB65/T 4166-2018 Test method for the length and strength of wool bundles of sheep wool—Quick detection of wool bundle length and strength—Body test method

GM Europe, Strength Scratch Tester

GME GMI L-7B01B-21-2012 Strength of Pedal Mounting and Dash Penal (English/German; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14551 and GMW15335.)

GOSTR, Strength Scratch Tester

GOST 24757-1981 Vessels and apparatus. Apparatus of column type. Norms and methods of strenght calculations
GOST 34233.6-2017 Vessels and apparatus. Norms and methods of strength calculation. Strength calculation under low-cyclic loads
GOST 34233.8-2017 Vessels and apparatus. Norms and methods of strength calculation. Jacketed vessels and apparatus
GOST 34233.4-2017 Vessels and apparatus. Norms and methods of strength calculation. Strength and leak-tightness calculation of flange joints

Professional Standard - Military and Civilian Products, Strength Scratch Tester

WJ 744-1994 Test method for tensile strength of adhesives for optical instruments
WJ 2283-1995 Verification rules for activated carbon and impregnated carbon strength tester
WJ 745-1994 Test method for compressive shear strength of adhesives for optical instruments

Institute of Electrical and Electronics Engineers (IEEE), Strength Scratch Tester

IEEE Std 1308-1994 IEEE Recommended practice for instrumentation:Specifications for magnetic flux density and electric field strength meters- 10 Hz to 3 kHz
IEEE P1308/D4, September 2021 IEEE Draft Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters - 10 Hz to 3 kHz
IEEE P1308 IEEE Approved Draft Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters - 10 Hz to 3 kHz
IEEE P1308/D5, October 2022 IEEE Approved Draft Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters - 10 Hz to 3 kHz

VN-TCVN, Strength Scratch Tester

TCVN 6415-18-2005 Ceramic floor and wall tiles.Test methods.Part 18: Determination of scratch hardness of surface according to Mohs'scale

Standard Association of Australia （SAA）, Strength Scratch Tester

AS/NZS 3572.22:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of hardness by means of a Barcol impressor

Guangdong Provincial Standard of the People's Republic of China, Strength Scratch Tester

DB44/T 1274-2013 Determination of Gel Strength of Frozen Surimi by Texture Analyzer

Professional Standard - Building Materials, Strength Scratch Tester

JC/T 796-2013 The method of evaluating the fired common brick strength grading by rebound hammer
JC/T 796-1999 The method of evaluating the fired common brick strength grading by rebound hammer