ZH
RU
ES
high plastic
high plastic, Total:88 items.
In the international standard classification, high plastic involves: Welding, brazing and soldering, Reinforced plastics, Plastics, Pipeline components and pipelines, Raw materials for rubber and plastics, Materials and articles in contact with foodstuffs, Rubber and plastics products, Materials for the reinforcement of composites, Vocabularies, Equipment for the rubber and plastics industries, Semiconductor devices.
Association of German Mechanical Engineers, high plastic
Professional Standard - Building Materials, high plastic
- JC/T 2096-2011 Fiber glass-reinforced plastics high pressure line pipe
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, high plastic
- GB/T 41927-2022 Plastics—Thermosetting moulding materials—Evaluation of short-term performance at elevated temperatures
- GB/T 9979-1988 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reducde temperatures
- GB/T 9979-2005 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures
Association Francaise de Normalisation, high plastic
- NF EN ISO 11248:1999 Plastiques - Matières à mouler thermodurcissables - Évaluation des performances à court terme aux températures élevées
- NF EN ISO 15985:2017 Plastiques - Évaluation de la biodégradation anaérobie ultime dans des conditions de digestion anaérobie à teneur élevée en solides - Méthode par analyse du biogaz libéré
- NF T54-119:1976 Plasticsplasticized PVC sheets. Conventional test method for high frequency welding.
- NF T51-812*NF EN ISO 15985:2017 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
Korean Agency for Technology and Standards (KATS), high plastic
- KS B 6381-2001 High pressure thermoplastic hose assemblies for hydraulic use
- KS M ISO 11358:2006 Plastics－Thermogravimetry(TG) of polymers－General principles
- KS M ISO 976:2007 Rubber and plastics-Polymer dispersions and rubber latices-Determination of pH
- KS M ISO 976:2017 Rubber and plastics－Polymer dispersions and rubber latices－Determination of pH
- KS M ISO 11248:2007 Plastics－Thermosetting moulding materials－Evaluation of shortterm performance at elevated temperatures
- KS M ISO 11248-2007(2022) Plastics－Thermosetting moulding materials－Evaluation of shortterm performance at elevated temperatures
- KS M ISO 11248-2007(2017) Plastics－Thermosetting moulding materials－Evaluation of shortterm performance at elevated temperatures
- KS M ISO 18872:2019 Plastics — Determination of tensile properties at high strain rates
- KS M ISO 18872:2014 Plastics — Determination of tensile properties at high strain rates
- KS M ISO 19063-1:2017 Plastics ㅡ Impact-resistant polystyrene (PS-I) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
- KS M 3099-2012 Plastics－Quantitative evaluation of scratch-induced damages on polymeric and coating materials－Part 1： Under a constant load condition
- KS M ISO 17281-2007(2017) Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
- KS M ISO 11542-1:2006 Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials－Part 1：Designation system and basis for specifications
British Standards Institution (BSI), high plastic
- BS ISO 11358-2:2005 Plastics - Thermographimetry (TG) of polymers - Determination of activation energy
- BS ISO 11358-2:2014 Plastics. Thermogravimetry (TG) of polymers. Determination of activation energy
- BS ISO 11358-2:2021 Plastics. Thermogravimetry (TG) of polymers. Determination of activation energy
- 22/30427884 DC BS ISO 22183. Plastics. Validation of force-time curve of tensile testing at high speed
- BS EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at high temperatures
- BS EN 1186-14:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol
- BS EN ISO 15985:2017 Plastics. Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions. Method by analysis of released biogas
- BS ISO 11358-3:2014 Plastics. Thermogravimetry (TG) of polymers. Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
- BS ISO 18872:2007 Plastics - Determination of tensile properties at high strain rates
- BS PD CEN/TR 15932:2010 Plastics —
Recommendation
for terminology and
characterisation of
biopolymers and
bioplastics
- BS EN ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Designation system and basis for specifications
- BS EN ISO 11248:1994 Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures
- BS EN ISO 11542-2:1999 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Preparation of test specimens and determination of properties
Professional Standard - Petrochemical Industry, high plastic
- SH/T 1772-2011 Plastics.Determination of non-Newtonian index(NNI)for high density polyethylene
- SH/T 1836-2023 Plastics - Determination of the melt volume-flow rate (MVR) of ultra-high molecular weight polyethylene (PE-UHMW)
AENOR, high plastic
- UNE 53199:2015 Plastics. Polymeric materials, cellular flexible. Determination of solvents swelling
(U.S.) Ford Automotive Standards, high plastic
- FORD WSK-M2D460-A-2004 POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WRS-M4D145-B2-2014 POLYETHYLENE (PE), MOLDING COMPOUND, HIGH DENSITY, 100% PCR RESIN, INTERIOR *** TO BE USED WITH FORD WSS - M99P1111 - A***
- FORD WSK-M4D721-A-2013 POLYETHYLENE (PE), MOLDING COMPOUND HIGH DENSITY, MEDIUM MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D690-B1-2013 ACRYLONITRILE BUTADIENE STYRENE (ABS), MOLDING COMPOUND, HIGH HEAT RESISTANT, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D792-B1-2013 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND, HIGH HEAT RESISTANT, INTERIOR / EXTERIOR LIGHTING ***TO BE USED WITH FORD WSS-M99P1111-A***
ES-AENOR, high plastic
International Organization for Standardization (ISO), high plastic
- ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
- ISO 11358-2:2005 Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy
- ISO 11358-2:2014 Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy
- ISO 11358-2:2021 Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy
- ISO 18872:2007 Plastics - Determination of tensile properties at high strain rates
- ISO 11358-3:2013 Plastics.Thermogravimetry (TG) of polymers.Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
- ISO 15985:2004/Cor 1:2007 Plastiques - ?valuation de la biodégradation anaérobie ultime et de la désintégration dans des conditions de digestion anaérobie à teneur élevée en solides - Méthode par analyse du biogaz libéré RECTIFICATIF TECHNIQUE 1
- ISO 11358-3:2021 Plastics - Thermogravimetry (TG) of polymers - Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
European Committee for Standardization (CEN), high plastic
- EN ISO 11248:1999 Plastics - Thermosetting Moulding Materials - Evaluation of Short-Term Performance at Elevated Temperatures
German Institute for Standardization, high plastic
- DIN EN ISO 11248:1999 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993); German version EN ISO 11248:1999
- DIN EN ISO 15985:2018-02 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014); German version EN ISO 15985:2017
- DIN EN ISO 15985:2018 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014)
- DIN SPEC 1206:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics; German version CEN/TR 15932:2010
American National Standards Institute （ANSI), high plastic
- ANSI/ASTM D3763:2000 Plastics Using Load and Displacement Sensors, Test Method for High-Speed Puncture Properties of (08.03)
国家市场监督管理总局、中国国家标准化管理委员会, high plastic
- GB/T 36805.1-2018 Plastics—Determination of tensile properties at high strain rates—Part 1:Equation fitting method
- GB/T 36805.2-2020 Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method
US-GSA, high plastic
PT-IPQ, high plastic
- NP ISO 2285:1999 Rubber, vulcanized or thermoplastic Determination of tension set at normal and high temperatures
Lithuanian Standards Office , high plastic
- LST EN ISO 11248:2002 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993)
American Society for Testing and Materials (ASTM), high plastic
- ASTM D3763-00 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
- ASTM D3763-08 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
- ASTM D3763-18 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
- ASTM D3763-14 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
- ASTM D3763-15 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
- ASTM D793-49(1976)e1 Method of Test for Short-Time Stability at Elevated Temperatures of Plastics Containing Chlorine
GM Europe, high plastic
Canadian Standards Association (CSA), high plastic
KR-KS, high plastic
未注明发布机构, high plastic
- BS EN ISO 15985:2017(2018) Plastics – Determination of the ultimate anaerobic biodegradation under high - solids anaerobic - digestion conditions – Method by analysis of released biogas
ES-UNE, high plastic
- UNE-EN ISO 15985:2018 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014)
- UNE 53930-1:2019 Plastics. Plastic carrier bags with high content in recycled plastic for product carriage. Part 1: General
- UNE 53930-2:2019 Plastics. Plastic carrier bags with high content in recycled plastic for product carriage. Part 2: Polyethylene (PE) carrier bags
General Motors Corporation (GM), high plastic
SE-SIS, high plastic
- SIS SMS 2015-1967 Plastic pipes. Pressure and waste water pipes of hi.gh density polyethylene. Testing
- SIS SMS 2014-1967 Plastic pipes. lJressure and waste wate.r pipes of high density polyethylene
国家能源局, high plastic
- SH/T 1818-2017 Test method for abrasion of plastic ultra-high molecular weight polyethylene mortar
Professional Standard - Machinery, high plastic
SAE - SAE International, high plastic
- SAE AMS3631B-1993 Polyvinyl Chloride (PVC) Plastic Extrusions High Temperature@ Flexible
Group Standards of the People's Republic of China, high plastic
U.S. Military Regulations and Norms, high plastic
GM North America, high plastic
- GM 9984830-2009 High Bake, Nonconductive Rigid Primer for Plastics (Revision C)
Professional Standard - Electron, high plastic
- SJ 2760-1987 Detail specification for plastic package high voltage silicon rectifier stacks,Type 2CZ70~77 and 2CL79