ZH
RU
ES

Homogenizer

Homogenizer, Total:499 items.

In the international standard classification, Homogenizer involves: Plastics, Textile machinery, Plant and equipment for the food industry, Kitchen equipment, Construction materials, Pulps, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Agricultural machines, implements and equipment, Equipment for the paper industry, Construction equipment, Medical equipment, Paper and board, Railway rolling stock, Equipment for processing of minerals, Leather technology, Electrical wires and cables, Pharmaceutics, Farming and forestry, Pumps, Products of the chemical industry, Rubber and plastics products, Industrial automation systems, Equipment for the metallurgical industry, Energy and heat transfer engineering in general, Metrology and measurement in general, Characteristics and design of machines, apparatus, equipment, Mining equipment, Earth-moving machinery, Lubricants, industrial oils and related products, Paints and varnishes, Environmental protection, Seals, glands, Elements of buildings, Soil quality. Pedology, Surface treatment and coating, Hydraulic energy engineering, Testing of metals, Linear and angular measurements, Cereals, pulses and derived products, Tyres, Air quality, Packaging machinery, Electronic tubes, Aircraft and space vehicles in general, Vocabularies, Wastes, Components for aerospace construction, Bearings, Construction industry, Water quality, Gears, Shipbuilding and marine structures in general, Road vehicle systems, Small craft, Iron and steel products, Power stations in general, Interior finishing, Construction technology, Petroleum, petroleum products and natural gas handling equipment, External sewage systems, Test conditions and procedures in general, Noise with respect to human beings, Acoustics and acoustic measurements, Aerospace electric equipment and systems, Internal combustion engines, Photography, Components and accessories for telecommunications equipment, Packaging materials and accessories, Materials and articles in contact with foodstuffs, Products of the textile industry, Pesticides and other agrochemicals.


SE-SIS, Homogenizer

CZ-CSN, Homogenizer

Professional Standard - Light Industry, Homogenizer

Association Francaise de Normalisation, Homogenizer

  • NF T53-004:1985 PLASTICS. HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE FOR PASTE. DESIGNATION.
  • NF EN 12757-1+A1:2010 Machines à homogénéiser des produits de revêtement - Prescriptions de sécurité - Partie 1 : machines à homogénéiser destinées à être utilisées pour la réfection des peintures d'automobiles
  • NF EN 12757-1/IN1:2010 Machines à homogénéiser des produits de revêtement - Prescriptions de sécurité - Partie 1 : machines à homogénéiser destinées à être utilisées pour la réfection des peintures d'automobiles
  • NF G40-032:1975 Textile machinery. Rag beater or shaker. Nomenclature.
  • NF EN 707:2018 Matériel agricole - Épandeurs de lisier - Sécurité
  • NF Q50-002-2*NF EN ISO 5263-2:2005 Pulps - Laboratory wet disintegration - Part 2 : disintegration of mechanical pulps at 20 degrees C
  • NF U02-023:2009 Agricultural machinery - Slurry tankers - Safety.
  • NF EN ISO 5263-2:2005 Pâtes - Désintégration humide en laboratoire - Partie 2 : désintégration des pâtes mécaniques à 20 degrés C
  • NF A04-194:1996 Foundry products. Guideline for acceptance criteria of discontinuities on machined surfaces.
  • NF L31-212:1965 Airframe bearings. Rigid ball bearings for average loads. (rech.). Dimensions and loads.
  • NF Q50-002-3*NF EN ISO 5263-3:2005 Pulps - Laboratory wet disintegration - Part 3 : disintegration of mechanical pulps at superior or equal 85 oC
  • NF L31-212:1966 AIRFRAME BEARINGS. RIGID BALL BEARINGS FOR AVERAGE LOADS. (RECH.). DIMENSIONS AND LOADS.
  • NF EN ISO 5263-3:2023 Pâtes - Désintégration humide en laboratoire - Partie 3 : désintégration des pâtes mécaniques à une température supérieure ou égale à 85 oC
  • NF Q03-410*NF ISO 11480:2017 Pulp, paper and board - Determination of total chlorine and organically bound chlorine
  • NF Q40-002-4:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4 : pulpers and their loading facilities.
  • NF EN 12001:2012 Machines pour le transport, la projection et la distribution de béton et mortier - Prescriptions de sécurité
  • NF Q40-002-4*NF EN 1034-4:2021 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4 : pulpers and their loading facilities
  • NF ISO 11480:2017 Pâtes, papier et carton - Dosage du chlore total et du chlore lié aux matières organiques
  • NF Q40-002-4:2010 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4 : pulpers and their loading facilities.

YU-JUS, Homogenizer

  • JUS H.N8.143-1988 Pulps. Laborator/ beating. Valley beater method
  • JUS H.N8.142-1988 Pulps. Laboratory beating. Jokro mili method
  • JUS D.B5.020-1984 Products offorest utilization. Wood forproduct ofcellulose, somi-hemical pulp andrmchanicalpulp
  • JUS B.B8.040-1982 Crushed aggregate for concrete and mortar. Exemination of aggregate with organic impurities

Professional Standard - Textile, Homogenizer

Professional Standard - Machinery, Homogenizer

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Homogenizer

  • GB/T 26176-2010 Soymilk maker
  • GB/T 24325-2009 Pulps.Laboratory beating.Valley beater method
  • GB/T 29285-2012 Pulps.Laboratory wet disintegration.Disintegration of mechanical pulps
  • GB/T 24685-2009 Flatting and puddling paddy field machine
  • GB/T 25649-2010(英文版) Road construction and road maintenance machinery and equipment—Slurry seal machine
  • GB/T 19551-2004 Textile machinery-Warp sizing machines-Maximum usable width
  • GB/T 30965-2014 Earth-moving machinery.Determination of average ground contact pressure for crawler machines
  • GB/T 25649-2010 Road construction and road maintenance machinery and equipment.Slurry seal machine
  • GB/T 27793-2011(英文版) Beater addition non asbestos gasket materials
  • GB/T 42982-2023 Calculation method of average working time between failures for industrial robots
  • GB/T 22904-2008 Pulp,paper and board.Determination of total chlorine and organically bound chlorine
  • GB/T 22904-2023 Determination of total chlorine and organochlorine in paper, board and pulp
  • GB/T 21843-2008 Plastics.Vinyl chloride homopolymer and copolymer resins.Particle size determination by mechanical sieving
  • GB 28395-2012 Conveying,spraying and placing machines for concrete and mortar.Safety requirements
  • GB/T 30639-2014 General technical specification of automatic metal canned sauce (syrup) filling and sealing machine

Professional Standard - Railway, Homogenizer

  • TB 1039-1974 Locomotive balance air cylinder
  • TB/T 2217-1991 Calculation of Average Fuel Consumption Rate of Diesel Locomotive
  • TB/T 2539-1995 Test method for current distribution unevenness of diesel locomotive traction motor

Danish Standards Foundation, Homogenizer

  • DS 423.43/Bil.1:2002 Testing of concrete - Hardened concrete - Reference atlas on paste homogeneity
  • DS/EN 25264-2:1994 Pulps-Laboratory beating-Part 2:PFI mill method
  • DS/EN 25264-3:1994 Pulps-Laboratory beating-Part 3:Jokro mill method
  • DS/EN 707+A1:2009 Agricultural machinery - Slurry tankers - Safety
  • DS/EN ISO 5263-2:2005 Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees °C
  • DS/EN ISO 5263-3:2005 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at > 85 degrees °C
  • DS/EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
  • DS/EN 12151:2008 Machinery and plants for the preparation of concrete and mortar - Safety requirements

Japanese Industrial Standards Committee (JISC), Homogenizer

  • JIS P 8221-1:1998 Pulps -- Laboratory beating -- Part 1: Beater method
  • JIS P 2103:1962 Ground pulp for paper
  • JIS P 8220-3:2020 Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at greater than 85 degree C
  • JIS P 8253:2006 Pulp, paper and board -- Determination of total chlorine and organically bound chlorine
  • JIS K 7369:2009 Plastics -- Polyvinyl chloride homopolymer and copolymer resins -- Determination of particle size by mechanical sieving
  • JIS A 8612:2006 Conveying, spraying and placing machines for concrete and mortar -- Safety requirements

American National Standards Institute （ANSI), Homogenizer

Canadian General Standards Board （CGSB), Homogenizer

Korean Agency for Technology and Standards (KATS), Homogenizer

  • KS M ISO 5264-1:2021 Pulps — Laboratory beating — Part 1: Valley beater method
  • KS M ISO 5264-1:2016 Pulps－Laboratory beating－Part 1：Valley beater method
  • KS L 5109-2017 Testing method for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency
  • KS M ISO 5263-2:2019 Pulps — Laboratory wet disintegration — Part 2：Disintegration of mechanical pulps at 20 ℃
  • KS B ISO 16754-2012(2017) Earth-moving machinery－Determination of average ground contact pressure for crawler machines
  • KS M ISO 5263-2:2009 Pulps-Laboratory wet disintegration-Part 2:Disintegration of mechanical pulps at 20 ℃
  • KS M ISO 5263-3:2009 Pulps－Laboratory wet disintegration－Part 3：Disintegration of mechanical pulps at ≥85 ℃
  • KS L 5109-2017(2022) Testing method for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency
  • KS M ISO 5263-3:2019 Pulps－Laboratory wet disintegration－ Part 3：Disintegration of mechanical pulps at ≥85 ℃
  • KS B ISO 16754-2012(2022) Earth-moving machinery－Determination of average ground contact pressure for crawler machines
  • KS M ISO 5651:2003 Paper, board and pulps－Units for expressing properties
  • KS B ISO 16754:2012 Earth-moving machinery－Determination of average ground contact pressure for crawler machines
  • KS M 7039-2000 Testing method for organic solvent extractives in pulp
  • KS M ISO 11480:2007 Pulp, paper and board－Determination of total chlorine and organically bound chlorine
  • KS M 7039-2021 Testing method for organic solvent extractives in pulp
  • KS M 7039-2015 Testing method for organic solvent extractives in pulp
  • KS M 7039-1985 Testing method for organic solvent extractives in pulp
  • KS M 7039-2002 Testing method for organic solvent extractives in pulp
  • KS L 5109-2012 Testing method for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency
  • KS L 5109-1986 Testing method for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency
  • KS M ISO 11480:2017 Pulp, paper and board－Determination of total chlorine and organically bound chlorine
  • KS V ISO 5621-2014(2019) Bilge mud boxes for machinery spaces and tunnels — General design characteristics
  • KS F 2514-2002 Testing method for effect of organic impurities in fine aggregates on strength of mortar
  • KS F 2514-1986 Testing method for effect of organic impurities in fine aggregates on strength of mortar

KR-KS, Homogenizer

Professional Standard - Chemical Industry, Homogenizer

Group Standards of the People's Republic of China, Homogenizer

RO-ASRO, Homogenizer

  • STAS 3261-1984 APIITE MECHANIGAL WOOD PULP
  • STAS 6757-1980 Semi-chemical pulp REED MECHANIC CHEMICAL PULP
  • STAS 3261-1972 W'TTTTF MFOTIAXIOAT, WOOD PULP
  • STAS 11326/4-1984 RUBBER STOPPERS FOR RECIPIENTS OF BLOOD, PLASMA AND AQUEOUS SOLUTIONS FOR INJECTIONS AND PERFUSIONS Hcmolityc impurities checking up
  • STAS 9380-1980 Petroleum equipment WELL CASING PACKERS
  • STAS 11849-1983 Textile machinery WARP SIZING MACHINES Maximum usable width
  • STAS 6095/3-1990 Pulps SAMPLES PREPA RATION FOR PHYSICAL-MECHANICAL TESTS AND CHEMICAL ANALYSIS. LABORATORY PULP SHEETS FORMER AND DRYING
  • STAS 5156-1974 CEMENTS Detemination of mechanical strengths on plastic mortars
  • STAS 3292-1969
  • STAS 7781-1967
  • STAS 3620/2-1985 Water supplies SEPARATION BY SUSPENSION SETTLING TANKS "WITH MECHANICAL RECIRCULATION OF MUD Design rules
  • STAS 6095/2-1990 Pulps SAMPLES PREPARATION FORPHYSICAL-MACHA-NIC?L TESTS AND CHEMICAL ANAL SIS Milling
  • STAS 11327/9-1983 RUBBER STOPPERS FOR BLOOD, PLASMA AND SOLUTION BOTTLES FOR INJECTIONS AND PERFUSIONS Organic substances determination
  • STAS 6095/1-1990 Pulps SAMPLKS PREPARATION FOR PHYSICAL-MECHANICAL TESTS AND CHEMICAL ANALYSIS Wet disintegration

Professional Standard - Traffic, Homogenizer

Professional Standard - Construction Industry, Homogenizer

Professional Standard - Business, Homogenizer

工业和信息化部, Homogenizer

Taiwan Provincial Standard of the People's Republic of China, Homogenizer

  • CNS 12495-1992 Laboratory Beating of Pulp (Beater Method)
  • CNS 13145-2002 Method of test for solvent extractable content in pulp
  • CNS 12496-1992 Laboratory Beating of Pulp (PFI Mill Method)
  • CNS 11153-1984 Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • CNS 3655-1973 Method for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

German Institute for Standardization, Homogenizer

  • DIN 54360:2004 Pulps - Laboratory beating - Jokro mill method
  • DIN ISO 6176:1996 Textile machinery - Warp sizing machines - Maximum usable width (ISO 6176:1994)
  • DIN EN 707:2019-12 Agricultural machinery - Slurry tankers - Safety; German version EN 707:2018 / Note: Applies in conjunction with DIN EN ISO 4254-1 (2016-09).
  • DIN EN ISO 5263-2:2004 Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 °C (ISO 5263-2:2004); German version EN ISO 5263-2:2004
  • DIN EN ISO 5263-3:2004 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at 85 °C (ISO 5263-3:2004); German version EN ISO 5263-3:2004
  • DIN EN ISO 5263-2:2004-12 Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 °C (ISO 5263-2:2004); German version EN ISO 5263-2:2004
  • DIN EN ISO 5263-3:2023 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at 85 ？C (ISO 5263-3:2023)
  • DIN EN 707:2009 Agricultural machinery - Slurry tankers - Safety(includes Amendment A1:2009); English version of DIN EN 707:2009-12
  • DIN EN 13406:2003-02 Agricultural machinery - Slurry tankers and spreading devices - Environmental protection; Requirements and test methods for the spreading precision; German version EN 13406:2002
  • DIN EN 12151:2008 Machinery and plants for the preparation of concrete and mortar - Safety requirements; English version of DIN EN 12151:2008-05
  • DIN EN 12001:2012-11 Conveying, spraying and placing machines for concrete and mortar - Safety requirements; German version EN 12001:2012
  • DIN 459-1:1995-11 Building material machines - Mixers for concrete and mortar - Part 1: Terms, determination of performance, sizes
  • DIN 459-2:1995-11 Building material machines - Mixers for concrete and mortar - Part 2: Procedure for the examination of the mixing efficiency of concrete mixers

RU-GOST R, Homogenizer

  • GOST 27203-1987 Homogenizers for milk. Technical parametres
  • GOST 12612-1979 Metallurgical soaking pit cranes. Basic parameters
  • GOST 9231-1980 Double shaft paddle mixers. Specifications
  • GOST ISO 16754-2013 Earth-moving machinery. Determination of average ground contact pressure for crawler machines
  • GOST 5065-1973 Organic dyes. Sulphur black paste. Specifications
  • GOST 25166-1982 Machines for the pulp and paper industry. Safety requirements
  • GOST R 54778-2011 Machines for harvesting fruit and berries. Test methods
  • GOST R 54778-2011(2020) Machines for harvesting fruit and berries. Test methods
  • PNST 53-2015 Hydraulic turbines, storage pumps and pump-turbines. Tendering Documents. Part 4. Guidelines for technical specifications for Kaplan and propeller turbines
  • GOST EN 12001-2012 Conveying, spraying and placing machines for concrete and mortar. Safety requirements
  • GOST 18720.10-1976 Television camera tubes. Methods of measurement for black and white background nonuniformity
  • GOST 21892-1976 Rotors and transmission of helicopters. Terms and definitions
  • GOST 21664-1976 Aircraft engine propellers. Terms and definitions
  • GOST 30578-1998 Bleached cellulose and pulp mill sewage. Determination of adsorbable organic halogens (AOH). General requirements and methods of analysis
  • GOST R 51629-2000 Machinery for forestry. Industrial forestry tractors. Methods for defining of average pressure of propelling agents to ground
  • GOST 18720.9-1976 Television camera tubes. Methods of measurement for dark current and dark current nonuniformity
  • GOST 23023-1985 Light-weight propeller aeroplanes. Acceptable noise levels on ground and methods for its determination
  • GOST R 54263-2010 Pulp and paper production processes. Method for determination of adsorbable organic halogen compounds (AOX) content in natural and waste waters of pulp and paper mills
  • GOST 19105-1979 Pleasure crafts-row boats and motor boats. Types, basic parameters and technical requirements
  • GOST R 52661-2006 Pulp, paper and board. Method for determination of total chlorine and organically bound chlorine content
  • GOST 18276.4-1988 Machine-made textile floor coverings and carpet products. Method for determination of surface density of bonding

国家铁路局, Homogenizer

工业和信息化部/国家能源局, Homogenizer

NZ-SNZ, Homogenizer

  • AS/NZS 1301.417S:2014 Methods of test for pulp and paper Part 417s: Sampling to determine average quality

U.S. Air Force, Homogenizer

National Metrological Technical Specifications of the People's Republic of China, Homogenizer

International Organization for Standardization (ISO), Homogenizer

  • ISO 5264-2:2011 Pulps - Laboratory beating - Part 2: PFI mill method
  • ISO 6176:1994 Textile machinery - Warp sizing machines - Maximum usable width
  • ISO 6176:1981 Textile machinery; Warp sizing machines; Maximum usable width
  • ISO 5263-3:2004 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at 85 °C
  • ISO 5263-2:2004 Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 °C
  • ISO 5263-3:2023 Pulps — Laboratory wet disintegration — Part 3: Disintegration of mechanical pulps at ≥85°C
  • ISO 16754:2008 Earth-moving machinery - Determination of average ground contact pressure for crawler machines
  • ISO 11480:2017 Pulp, paper and board - Determination of total chlorine and organically bound chlorine
  • ISO 4566:1992 Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper
  • ISO 22498:2005 Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving
  • ISO 7829:1986 Photography; Black-and-white aerial camera films; Determination of ISO speed and average gradient
  • ISO/TS 11371:1980 Pulps — Guidelines for using laboratory refiners to simulate industrial low consistency refining

Professional Standard - Building Materials, Homogenizer

National Metrological Verification Regulations of the People's Republic of China, Homogenizer

Chongqing Provincial Standard of the People's Republic of China, Homogenizer

Professional Standard - Grain, Homogenizer

HU-MSZT, Homogenizer

ESDU - Engineering Sciences Data Unit, Homogenizer

  • ESDU 03012 B-2010 Computer program for calculation of mean value properties for non-uniform compressible flows
  • ESDU 03012 A-2007 Computer program for calculation of mean value properties for non-uniform compressible flows.
  • ESDU 03012-2004 Computer program for calculation of mean value properties for non-uniform compressible flows
  • ESDU 69023 D-1989 Average gust frequencies. Subsonic transport aircraft.
  • ESDU 67028 A-1972 Estimation of the r.m.s. stress in skin panels subjected to random acoustic loading.
  • ESDU 74026 A-1987 Estimation of r.m.s. stress in internal plates of a box structure subjected to random acoustic loading.
  • ESDU 84008 D-2011 Estimation of r.m.s. strain in laminated skin panels subjected to random acoustic loading
  • ESDU 84008 D-1993 Estimation of r.m.s. strain in laminated skin panels subjected to random acoustic loading.
  • ESDU 72005 E-1996 The estimation of r.m.s. stress in stiffened skin panels subjected to random acoustic loading.

轻工业部, Homogenizer

  • QB 1673-1992 Hygiene requirements for dairy mechanical homogenizers and plunger pumps

中华全国供销合作总社, Homogenizer

CEN - European Committee for Standardization, Homogenizer

  • PREN 16333-2011 Slurry surfacing - Specification for airfields
  • PREN 707-2015 Agricultural machinery - Slurry tankers - Safety
  • EN ISO 5263-3:2004 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at greater than 85 degrees C

ACI - American Concrete Institute, Homogenizer

  • ACI 351.1R-1993 Grouting for Support of Equipment and Machinery
  • ACI 351.1R-1999 Grouting between Foundations and Bases for Support of Equipment and Machinery

Shanxi Provincial Standard of the People's Republic of China, Homogenizer

  • DB14/T 1014-2014 Per capita comprehensive energy consumption quota for state agencies

British Standards Institution (BSI), Homogenizer

  • BS EN ISO 5263-2:2007 Pulps - Laboratory wet disintegration - Disintegration of mechanical pulps at 20 °C
  • BS EN ISO 5263-2:2004 Pulps - Laboratory wet disintegration - Disintegration of mechanical pulps at 20 °C
  • BS ISO 16754:2008 Earth-moving machinery. Determination of average ground contact pressure for crawler machines
  • BS EN ISO 5263-3:2004 Pulps — Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at > 85 °C (ISO 5263-3:2004)
  • BS EN ISO 5263-3:2023 Tracked Changes. Pulps. Laboratory wet disintegration. Disintegration of mechanical pulps at ≥ 85°C
  • BS ISO 16754:2011 Earth-moving machinery. Determination of average ground contact pressure for crawler machines
  • BS EN 1034-3:2011 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Rereelers and winders
  • BS EN 1034-3+A1:2000 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Winders and slitters, plying machines
  • BS EN 12001:2004 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
  • BS EN 707:2018 Tracked Changes. Agricultural machinery. Slurry tankers. Safety
  • BS ISO 11480:1997 Pulp, paper and board - Determination of total chlorine and organically bound chlorine
  • BS ISO 11480:1998 Pulp, paper and board - Determination of total chlorine and organically bound chlorine
  • BS ISO 11480:2017 Pulp, paper and board. Determination of total chlorine and organically bound chlorine
  • 21/30408835 DC BS EN ISO 5263-3. Pulps. Laboratory wet disintegration. Part 3. Disintegration of mechanical pulps at > 85°C
  • BS EN 1034-4:2005 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Pulpers and their loading facilities
  • BS EN ISO 4566:1995 Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper
  • BS EN 1034-4:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Pulpers and their loading facilities
  • BS ISO 22498:2005 Plastics. Vinyl chloride homopolymer and copolymer resins. Particle size determination by mechanical sieving
  • BS EN 12151:2007 Machinery and plants for the preparation of concrete and mortar. Safety requirements

GOSTR, Homogenizer

国家市场监督管理总局、中国国家标准化管理委员会, Homogenizer

  • GB/T 24685-2021 Puddling and fertilizing land leveler for paddy field
  • GB/T 40150-2021 Grain and oil storage—Evaluation of uniformity of grain mechanical ventilation
  • GB/T 35014-2018 Building construction machinery and equipment—Automatic pressure grouting machine for prestressing
  • GB/T 37168-2018 Building construction machinery and equipment－Machinery and plants for the preparation of concrete and mortar safety requirements

Standard Association of Australia （SAA）, Homogenizer

  • AS 1301.215:2019 Methods of test for pulp paper, Method 215: Pulps — Laboratory wet disintegration — Disintegration of mechanical pulps at ≥ 85 °C
  • AS ISO 16754:2021 Earth-moving machinery — Determination of average ground contact pressure for crawler machines
  • AS/NZS 1301.012:2017 Methods of test for pulp and paper, Method 012: Organic solvent extractives in wood, pulp and paper

Lithuanian Standards Office , Homogenizer

  • LST EN 707-2000+A1-2010 Agricultural machinery - Slurry tankers - Safety
  • LST EN ISO 5263-3:2004 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at > 85 degrees C (ISO 5263-3:2004)
  • LST EN ISO 5263-2:2004 Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees C (ISO 5263-2:2004)
  • LST EN 12001-2012 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
  • LST EN 12151-2008 Machinery and plants for the preparation of concrete and mortar - Safety requirements

AENOR, Homogenizer

  • UNE-EN 707:2000+A1:2009 Agricultural machinery - Slurry tankers - Safety
  • UNE-ISO 16754:2010 Earth-moving machinery -- Determination of average ground contact pressure for crawler machines
  • UNE 57118:1986 MECHANICAL PULP. FIBER CLASSIFICATION BY THE MCNETT METHOD
  • UNE 40335:1979 TEXTILE MACHINERY AND ACCESORIES. WARP SIZING MACHINES. MAXIMUM USABLE WIDTH
  • UNE 40607:2017 Agrotextiles. Determination of the geometric uniformity of the woven fabrics with monofilaments
  • UNE-EN ISO 5263-2:2005 Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees C (ISO 5263-2:2004)
  • UNE-EN ISO 5263-3:2005 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at > 85 degrees C (ISO 5263-3:2004)
  • UNE-ISO 11480:2009 Pulp, paper and board -- Determination of total chlorine and organically bound chlorine
  • UNE-EN 12001:2013 Conveying, spraying and placing machines for concrete and mortar - Safety requirements

Professional Standard - Coal, Homogenizer

Professional Standard - Agriculture, Homogenizer

  • GB/T 26176-2023 Household and similar soybean milk makers
  • JB/T 50062-1995 Soybean refiner product quality classification
  • NY/T 507-2002 Driving machine of harrowing slurry and flating soil-Specifications
  • NY/T 507-202 Driving machine of harrowing slurry and flating soil--Specifications
  • NY/T 1414-2007 Technical Specification of Quality Evaluation for Soybean Milk Milling Machine

ES-UNE, Homogenizer

  • UNE-EN 707:2020 Agricultural machinery - Slurry tankers - Safety
  • UNE-EN ISO 5263-3:2023 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at = 85°C (ISO 5263-3:2023)

VE-FONDONORMA, Homogenizer

Professional Standard - Petrochemical Industry, Homogenizer

  • SH/T 0801-2007 Standard test method for determination of homogeneity and miscibility in automotive engine oils

Jiangsu Provincial Standard of the People's Republic of China, Homogenizer

  • DB32/T 3853-2020 Technical specification for mechanical uniform sowing of rice stubble and wheat

Shandong Provincial Standard of the People's Republic of China, Homogenizer

American Society for Testing and Materials (ASTM), Homogenizer

  • ASTM C305-12 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • ASTM C305-11 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • ASTM C305-20 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • ASTM C305-13 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • ASTM D4708-07 Standard Practice for Preparation of Uniform Free Films of Organic Coatings
  • ASTM D4708-19 Standard Practice for Preparation of Uniform Free Films of Organic Coatings
  • ASTM C305-99e1 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • ASTM C305-99 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • ASTM C305-06 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • ASTM C305-14 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • ASTM D4708-12 Standard Practice for Preparation of Uniform Free Films of Organic Coatings
  • ASTM D4708-99(2004) Standard Practice for Preparation of Uniform Free Films of Organic Coatings
  • ASTM D4708-99 Standard Practice for Preparation of Uniform Free Films of Organic Coatings
  • ASTM F1150-22 Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
  • ASTM F1899-14a(2019) Standard Specification for Food Waste Pulper Without Waterpress Assembly
  • ASTM F1899-14a Standard Specification for Food Waste Pulper Without Waterpress Assembly
  • ASTM F1150-88(2000) Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
  • ASTM A1028-03 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
  • ASTM D6922-03 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
  • ASTM D6922-11 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
  • ASTM D6922-13 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
  • ASTM D6922-13(2018) Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
  • ASTM F2454-05 Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
  • ASTM F2454-05(2010) Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
  • ASTM C937-02 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
  • ASTM C87/C87M-17 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • ASTM C87-04 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • ASTM C87-03 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • ASTM C1181-00 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
  • ASTM C87-05 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • ASTM C87/C87M-10 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • ASTM C1181-00(2005) Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
  • ASTM C1181/C1181M-17 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
  • ASTM C1181-00(2012) Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts

European Committee for Standardization (CEN), Homogenizer

  • EN ISO 5263-3:2023 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at ≥ 85°C (ISO 5263-3:2023)
  • prEN 998-1-1993 Specification for mortar for masonry; part 1: rendering and plastering mortar with inorganic binding agents
  • EN ISO 5263-2:2004 Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees C
  • prEN ISO 5263-3:2021 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at ≥ 85°C (ISO/DIS 5263-3:2021)
  • EN 12151:2007 Machinery and plants for the preparation of concrete and mortar - Safety requirements
  • EN 12001:2003 Conveying, spraying and placing machines for concrete and mortar - Safety requirements Incorporates Amendment A1: 2009
  • EN 3475-506:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity
  • EN 3475-506:2002 Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 506: Plating Continuity
  • EN 1034-4:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
  • EN 1034-4:2021 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
  • EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract

PL-PKN, Homogenizer

  • PN M08502-1987 Means of mechanization and automatization of assembling Balancers
  • PN C89413-1989 Dispersion of homopolymers and copolymers Determination of mechanical stability

SAE - SAE International, Homogenizer

  • SAE PT-94-2003 Homogeneous Charge of Compression Ignition (HCCI) Engines: Key Research and Development Issues

American Society of Mechanical Engineers (ASME), Homogenizer

  • ASME 2210-2001 Weld Joints Between Materials of Unequal Thickness for Steam Drums and Mud Drums Section I; ANNULLED; SUPP 7

未注明发布机构, Homogenizer

ES-AENOR, Homogenizer

Liaoning Provincial Standard of the People's Republic of China, Homogenizer

  • DB21/T 3230-2020 Technical specification for mechanical spraying gypsum mortar
  • DB21/T 2784-2017 Paddy field stubble burying and raking paddle grader operating technical regulations
  • DB21/T 1708-2008 Inorganic lightweight thermal insulation slurry wall thermal insulation engineering technical regulations

Anhui Provincial Standard of the People's Republic of China, Homogenizer

  • DB34/T 1279-2014 Inorganic thermal insulation mortar wall thermal insulation system
  • DB34/T 1503-2011 Technical specification for application of inorganic thermal insulation mortar wall thermal insulation system

Zhejiang Provincial Standard of the People's Republic of China, Homogenizer

Indonesia Standards, Homogenizer

  • SNI ISO 5263-2:2014 Pulps – Laboratory wet disintegration – Part 2 : Disintegration of mechanical pulps at 20 °C
  • SNI ISO 5263-3:2014 Pulps – Laboratory wet disintegration – Part 3 : Disintegration of mechanical pulps at ≥ 85 °C

The American Road & Transportation Builders Association, Homogenizer

  • AASHTO T 162-2014 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • AASHTO T 162-2015 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • AASHTO T 162-2016 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • AASHTO T 71-2007 Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • AASHTO T 162-2002 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency HM-22; Part IIA; ASTM Designation: C 305-99
  • AASHTO T 71-2008 Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

AASHTO - American Association of State Highway and Transportation Officials, Homogenizer

  • T 162-2004 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2009 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2014 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2015 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2008 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2016 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2012 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-1993 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency (ASTM C305-91)
  • T 162-2002 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency (HM-22; Part IIA; ASTM Designation: C 305-99)
  • T 162-1996 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency (HM-22; Part IIA; ASTM Designation: C 305-99)
  • T 71-2007 Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • T 71-2008 Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

IT-UNI, Homogenizer

International Electrotechnical Commission (IEC), Homogenizer

  • IEC TR3 61366-4:1998 Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 4: Guidelines for technical specifications for Kaplan and propeller turbines

商务部, Homogenizer

  • SB/T 11214-2017 Technical regulations for mechanized construction of dry mixed mortar

农业农村部, Homogenizer

  • NY/T 507-2020 Technical specifications for quality evaluation of harrow graders

NL-NEN, Homogenizer

National Aeronautics and Space Administration (NASA), Homogenizer

GB-REG, Homogenizer

AIA/NAS - Aerospace Industries Association of America Inc., Homogenizer

  • NASM20065-2010 KEY@ MACHINE@ RECTANGULAR IN CROSS SECTION@ BOTH ENDS SQUARE (Rev 1)
  • NASM20065-2014 KEY@ MACHINE@ RECTANGULAR IN CROSS SECTION@ BOTH ENDS SQUARE (Rev 2)

AT-ON, Homogenizer

  • OENORM EN ISO 5263-3:2021 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at >= 85°C (ISO/DIS 5263-3:2021)
  • ONORM S 5057-1990 Measuring and working conditions for the determination ofsoundpower of woodworking machines; panel sizing machines

Society of Automotive Engineers (SAE), Homogenizer

  • SAE J699A-1977 AVERAGE VEHICLE DIMENSIONS FOR USE IN DESIGNING DOCKING FACILITIES FOR MOTOR VEHICLES
  • SAE J699-2011 Average Vehicle Dimensions for Use in Designing Docking facilities for Motor Vehicles

BE-NBN, Homogenizer

TR-TSE, Homogenizer

U.S. Military Regulations and Norms, Homogenizer

GM Daewoo, Homogenizer

Professional Standard - Urban Construction, Homogenizer

  • JGJ/T 253-2019 Technical standard for inorganic light aggregate mortar insulation system

Jilin Provincial Standard of the People's Republic of China, Homogenizer

  • DB22/T 1791-2013 Technical specifications for paddy field stubble removal and paddy soil preparation machinery

NO-SN, Homogenizer

  • NS 4468-1977 Machinery and equipment for bakeries - Sanitary requirements to equipment for emulsifying and homogenizing

Association of German Mechanical Engineers, Homogenizer

  • VDI 2727 Blatt 5-2006 Catalogues for machine design - Mechanisms for motion transfer - Converting unidirectional rotation into non-uniform unidirectional motion

Professional Standard - Petroleum, Homogenizer

  • SY/T 4074-1995 Process of cement mortar lining with coating machine on the inside surface of steel pipes

IN-BIS, Homogenizer

American Concrete Institute, Homogenizer

  • ACI 351.1R-2012 Report on Grouting between Foundations and Bases for Support of Equipment and Machinery

Professional Standard - Electricity, Homogenizer

  • DL/T 1704-2017 Performance test method of desulfurization wet mill limestone pulping system

Heilongjiang Provincial Standard of the People's Republic of China, Homogenizer

  • DB23/T 3463-2023 Technical specification for the application of quarry tailings machine-made sand concrete mortar

Professional Standard - Recommended Standards for Engineering Construction, Homogenizer

  • CECS 297-2011 Technical specification for the application of inorganic thermal insulation mortar on the exterior walls of rural buildings

国家能源局, Homogenizer

  • SY/T 4074-2016 Technical specification for mechanical coating of cement mortar lining of steel pipes

American Welding Society (AWS), Homogenizer

  • WRC 488:2004 Damage Mechanisms Affecting Fixed Equipment in the Pulp and Paper Industry

WRC - Welding Research Council, Homogenizer

  • BULLETIN 488-2004 DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE PULP AND PAPER INDUSTRY

International Telecommunication Union (ITU), Homogenizer

  • ITU-T G.228-1993 MEASUREMENT OF CIRCUIT NOISE IN CABLE SYSTEMS USING A UNIFORM - SPECTRUM RANDOM NOISE LOADING
  • ITU-T G.228 FRENCH-1993 MEASUREMENT OF CIRCUIT NOISE IN CABLE SYSTEMS USING A UNIFORM - SPECTRUM RANDOM NOISE LOADING
  • ITU-T G.228 SPANISH-1993 MEASUREMENT OF CIRCUIT NOISE IN CABLE SYSTEMS USING A UNIFORM - SPECTRUM RANDOM NOISE LOADING

CU-NC, Homogenizer

  • NC 19-02-40-1986 Occupational Hygiene and Safety Standards System. Driving Members of Working Means. Symbology

CO-ICONTEC, Homogenizer

Professional Standard - Electron, Homogenizer

  • SJ/T 31299-1994 Requirements of readiness and methods of inspection and assessment for double head loudspeaker cone pulp dredging machines

National Health Commission of the People's Republic of China, Homogenizer

  • GB 23200.98-2016 National food safety standards— Determination of eleven organophosphorus pesticides residues in royal jelly Gas chromatography

(U.S.) Ford Automotive Standards, Homogenizer

  • FORD ESW-M8G21-A-2012 GASKET, PAPER/BEATER MIX NITRILE BUTADIENE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A***

  Homogenizer, tissue homogenizer, tissue homogenate, Homogenize, refiner, Tissue Homogenizer, Homogenizer speed, Homogenized tissue, tissue homogenizer, Plant Homogenizer, Operating with a homogenizer, homogenizer in use, plastic homogenizer, Tissue Homogenizers and Homogenizers, Spooning machine, Homogenizer, pulp machine, Mixer, Homogenizer treatment, pulp machine.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved