ZH
RU
ES

Tester

Tester, Total:391 items.

In the international standard classification, Tester involves: Road engineering, Pharmaceutics, Mechanical testing, Geology. Meteorology. Hydrology, Textile machinery, Electrical wires and cables, Sewing machines and other equipment for the clothing industry, Metrology and measurement in general, Power transmission and distribution networks, Hydraulic energy engineering, Analytical chemistry, Testing of metals, Electrical engineering in general, Hand-held tools, Equipment for the paper industry, Linear and angular measurements, Construction equipment, On-board equipment and instruments, Diagnostic, maintenance and test equipment, Construction materials, Products of the textile industry, Aerospace engines and propulsion systems, Measurement of force, weight and pressure, Plastics, Road vehicles in general, Alarm and warning systems, Paints and varnishes, Equipment for petroleum and natural gas industries, Animal feeding stuffs, Petroleum products in general, Mining and quarrying, Freight distribution of goods, Environmental testing, Non-textile floor coverings, Lubricants, industrial oils and related products, Fuels, Rubber, Protection against fire, Paper and board, Audio, video and audiovisual engineering, Electricity. Magnetism. Electrical and magnetic measurements, Food products in general, Non-destructive testing, Surface treatment and coating, Earthworks. Excavations. Foundation construction. Underground works, Wastes, Elements of buildings, Equipment for the metallurgical industry, Graphic technology, Paper production processes, Installations in buildings, Burners. Boilers, Rubber and plastics products.


Professional Standard - Military and Civilian Products, Tester

SAE - SAE International, Tester

  • SAE J211-2004 INSTRUMENTATION FOR IMPACT TEST (PDF IS NOT AVAILABLE)
  • SAE J977-1966 INSTRUMENTATION FOR LABATORY IMPACT TESTS
  • SAE J211/2-1995 Instrumentation for Impact Test—Part 2: Photographic Instrumentation
  • SAE J211-1-2007 Instrumentation for Impact Test Part 1 Electronic Instrumentation
  • SAE J211-1-1995 Instrumentation for Impact Test Part 1 Electronic Instrumentation

Society of Automotive Engineers (SAE), Tester

Professional Standard - Machinery, Tester

  • JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
  • JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
  • JB/T 20076-2005 Dessolution tester
  • JB/T 20076-2013 Dissolution tester
  • JB/T 4279.4-1994 Enamelled winding wire test equipment and equipment verification method springback angle tester
  • JB/T 4279.5-1994 Enamelled winding wire test equipment verification method emergency pull-off tester
  • JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
  • JB/T 4279.8-1994 Enamelled winding wire test equipment and equipment verification method softening breakdown tester
  • JB/T 4279.9-1994 Enamelled winding wire test equipment verification method One-way paint scraping tester
  • JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
  • JB/T 4279.3-2008 Verification procedure for test equipment of enamelled winding wire.Part 3:Elongation tester
  • JB/T 4279.6-2008 Verification procedure for test equipment of enamelled winding wire.Part 6:Peeling tester
  • JB/T 4279.14-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 14: Solderability tester
  • JB/T 4279.4-2008 Verification procedure for test equipment of enamelled winding wire.Part 4:Springness tester
  • JB/T 4279.5-2008 Verification procedure for test equipment of enamelled winding wire.Part 5:Jerk tester
  • JB/T 4279.10-2008 Verification procedure for test equipment of enamelled winding wire.Part 10:Tester for resistance to solvents
  • JB/T 4279.13-1994 Enamelled winding wire test equipment and equipment verification method High-voltage paint film continuity tester
  • JB/T 4279.12-1994 Enamelled winding wire test equipment and equipment verification method Low-voltage paint film continuity tester
  • JB/T 4279.8-2008 Verification procedure for test equipment of enamelled winding wire.Part 8:Cut-through tester
  • JB/T 4279.9-2008 Verification procedure for test equipment of enamelled winding wire.Part 9:Unidirectional scraping tester
  • JB/T 4279.11-2008 Verification procedure for test equipment of enamelled winding wire.Part 11:Breakdown voltage tester
  • JB/T 4279.15-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 15: To-and-fro scraping tester
  • JB/T 4279.16-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 16: Static friction coefficient tester
  • JB/T 4279.17-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 17: Dynamic friction coefficient tester
  • JB/T 9386-1999 Specifications for the pendulum damping testers
  • JB/T 6247-1992 Bending strength at high temperature of shell - Tester
  • JB/T 7083-1993 Impulse voltage testing instruments for low voltage apparatus
  • JB/T 7080-1993 Testing instrument for winding inter-turn impulse voltage
  • JB/T 7083-2013 Impulse-voltage tester for low-voltage electrical installations
  • JB/T 4279.12-2008 Verification procedure for test equipment of enamelled winding wire.Part 12:Continuity of insulation tester(low voltage method)
  • JB/T 4279.13-2008 Verification procedure for test equipment of enamelled winding wire.Part 13:Continuity of insulation tester(high-voltage method)
  • JB/T 4278.19-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 19: Insulation scrape abrasion test device
  • JB/T 7080-2013 Impulse voltage tester for winding interturn insulation
  • JB/T 7081-1993 Model designation method for testing instruments and apparatus
  • JB/T 7081-2013 Type organization method for electrical special test equipment
  • JB/T 4279.1-1994 General rules for verification methods of enamelled winding wire test equipment
  • JB/T 4278.1-1993 General rules for verification methods of rubber and plastic wire and cable test equipment
  • JB/T 4279.2-1994 Enamelled winding wire test equipment verification method DC resistance test device
  • JB/T 4278.10-1993 Rubber plastic wire and cable test equipment verification method spark testing machine
  • JB/T 4278.8-1993 Rubber plastic wire and cable test equipment verification method low temperature test chamber
  • JB/T 4279.1-2008 Verification procedure for test equipment of enamelled winding wire.Part 1:General
  • JB/T 4278.3-1993 Rubber plastic wire and cable test equipment verification method flexural test device
  • JB/T 4279.7-1994 Enamelled winding wire test equipment verification method electric forced ventilation test chamber
  • JB/T 4278.4-1993 Rubber plastic wire and cable test equipment verification method wear-resistant test device
  • JB/T 4278.7-1993 Rubber plastic wire and cable test equipment verification method constant temperature water tank
  • JB/T 4278.2-1993 Rubber plastic wire and cable test equipment verification method low temperature impact test device
  • JB/T 4278.1-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 1: General
  • JB/T 4279.2-2008 Verification procedure for test equipment of enamelled winding wire.Part 2:DC electrical resistance tester
  • JB/T 4279.18-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 18: Resistance to refrigerants tester
  • JB/T 4278.8-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 8: Low temperature test oven
  • JB/T 4278.10-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 10: Spark tester
  • JB/T 4279.7-2008 Verification procedure for test equipment of enamelled winding wire.Part 7:Forced circulating-air oven
  • JB/T 4278.3-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 3: Flexing test device
  • JB/T 4278.4-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 4: Abrasion test device
  • JB/T 4278.14-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 14: Fire-resisting test device
  • JB/T 4278.6-1993 Rubber plastic wire and cable test equipment verification method natural ventilation thermal aging test chamber
  • JB/T 4278.9-1993 Rubber plastic wire and cable test equipment verification method Oxygen bomb, air bomb aging test chamber
  • JB/T 4278.7-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 7: Thermostat water bath
  • JB/T 4278.11-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 11: Low temperature bending test device
  • JB/T 4278.16-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 16: Smoke density test device
  • JB/T 4278.2-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 2: Low temperature impact test device
  • JB/T 4278.12-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 12: High temperature pressure test device
  • JB/T 4278.15-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 15: Bundle burning test device
  • JB/T 4278.17-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 17: Carbon black content test device
  • JB/T 4278.6-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 6: Natural ventilation thermal aging test oven
  • JB/T 4278.9-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 9: Oxygen bomb, air bomb aging test oven
  • JB/T 4278.13-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 13: Forced air heat aging test oven
  • JB/T 4278.5-1993 Rubber plastic wire and cable test equipment verification method single wire and cable vertical combustion DZ-1 method test device

National Metrological Verification Regulations of the People's Republic of China, Tester

Professional Standard - Traffic, Tester

Professional Standard - Light Industry, Tester

工业和信息化部/国家能源局, Tester

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tester

  • GB/T 22541-2008 Instrument for soil test.Compaction apparatus
  • GB/T 9357-2008 Instrument for soil test.Permeameter
  • GB/T 12745-2007 Geotechnical engineering instrument for test.Cone static or dynamic penetrometer
  • GB/T 12746-2007 Geotechnical engineering instrument for test.Penetration test apparatus
  • GB/T 30411-2013 Footwear machines.Flexing resistance tester
  • GB/T 19748-2005 Steel.Charpy V-notch pendulum impact test.Instrumented test method
  • GB/T 8432-1987 Humidity test control for colour fastness to light
  • GB 8432-1987 Humidity test control for colour fastness to light
  • GB/T 21043-2007 Instrument for soil test.Strain-controlled unconfined compression apparatus
  • GB/T 21997.1-2008 Instrument for soil test.Liquid limit device.Part 1: Casagrande liquid limit device
  • GB/T 21997.2-2008 Instrument for soil test.Liquid limit device.Part 2: Fall cone liquid limit device
  • GB/T 4935.1-2008 Instrument for soil test.Oedometer.Part 1:Single level arm oedometer
  • GB/T 4935.2-2009 Instrument for soil test.Oedometer.Part 2:Pneumatic oedometer
  • GB/T 4934.1-2008 Instrument for soil test.Shear apparatus.Part 1: Strain-controlled direct shear apparatus
  • GB/T 4934.2-2008 Instrument for soil test.Shear apparatus.Part 2: Field vane shear apparatus
  • GB/T 24107.1-2009 Instrument for soil test.Triaxial apparatus.Part 1:Strain controlled triaxial apparatus
  • GB/T 32710.1-2016 Safety requirements for environmental testing and conditioning equipment.Part 1:General requirements
  • GB/T 32710.12-2016 Safety requirements for environmental testing and conditioning equipment.Part 12:Salt baths
  • GB/T 22876-2008 Paper,board and corrugated fiberboard.Description and calibration of compression testing equipment
  • GB/T 21190-2007 Paper, board and corrugated fibreboard.Description and calibration of compression-testing equipment
  • GB/T 13606-2007 Instrument for geotechnical engineering.General specifications of vibrating wire sensor
  • GB/T 32710.7-2016 Safety requirements for environmental testing and conditioning equipment.Part 7:Climatic and environmental test chambers
  • GB/T 32710.3-2016 Safety requirements for environmental testing and conditioning equipment.Part 3: Refrigerated baths
  • GB/T 32710.5-2016 Safety requirements for environmental testing and conditioning equipment.Part 5:Heating baths
  • GB/T 32710.8-2016 Safety requirements for environmental testing and conditioning equipment.Part 8:Refrigerated incubators
  • GB/T 32710.11-2016 Safety requirements for environmental testing and conditioning equipment.Part 11:Heat aging test chambers
  • GB/T 32710.6-2016 Safety requirements for environmental testing and conditioning equipment.Part 6:Climatic chambers for biological application
  • GB/T 32710.9-2016 Safety requirements for environmental testing and conditioning equipment.Part 9:Electric heating incubators
  • GB/T 32710.2-2016 Safety requirements for environmental testing and conditioning equipment.Part 2:Refrigerated circulators
  • GB/T 32710.4-2016 Safety requirements for environmental testing and conditioning equipment.Part 4: Heating circulators
  • GB/T 12967.1-1991 Anodizing of aluminium and aluminium alloys--Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
  • GB/T 21196.1-2007 Textiles-Determination of the abrasion resistance of fabrics by the Martindale method-Part 1:Martindale abrasion testing apparatus
  • GB/T 32710.10-2016 Safety requirements for environmental testing and conditioning equipment.Part 10: Electric gravity convection ovens and forced ventilation ovens

Professional Standard - Textile, Tester

交通运输部, Tester

National Metrological Technical Specifications of the People's Republic of China, Tester

Group Standards of the People's Republic of China, Tester

  • T/HBJLXH 006-2023 Ball pressure tester calibration method
  • T/CEC 358-2020 Test Instrument Data Transmission Protocol
  • T/SJZSYYQXH JZ008-2023 Calibration method of low temperature temperature tester
  • T/ZZB 1079-2019 Xenon-arc sources aging resistance tester for plastics and their products
  • T/ZZB 1357-2019 Textile waterproof performance tester — Hydrostatic pressure method
  • T/ZZB 0659-2018 Martindale abrasion and pilling tester
  • T/CAPE 10102-2022 Concrete mixture performance test equipment management regulations
  • T/CAPE 10103-2022 Regulations for the management of concrete physical and mechanical properties test instruments and equipment
  • T/CAPE 10104-2022 Regulations for the management of concrete long-term performance and durability testing instruments and equipment

Association Francaise de Normalisation, Tester

  • NF X20-704*NF EN 16280:2012 Breath alcohol test devices for general public - Requirements and test methods
  • NF A03-015:2001 Steel - Charpy V-notch pendulum impact test - Instrumented test method.
  • NF A03-015*NF EN ISO 14556:2015 Metallic maerials - Charpy V-notch pendulum impact test - Instrumented test method
  • NF H00-046:1993 Packaging. Complete, filled transport packages. Stacking test using compression tester.
  • NF EN ISO 14556:2023 Matériaux métalliques - Essai de flexion par choc sur éprouvette Charpy à entaille en V - Méthode d'essai instrumenté
  • NF P94-074:1994 Soils : investigation and testing. Shear strength tests with revolving triaxial test apparatus. Apparatus. Preparation of test specimens. Unconsolidated and undrained (UU) test. Consolidated and undrained (Cu+U) test with measurement of the interstitial p
  • NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
  • NF X20-702:2014 Chemical breath tester - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods
  • NF A03-015/A1:2006 Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1 : annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces.
  • NF G07-121-1:2002 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1 : pilling box method.
  • NF D30-500/A1:1997 Test gases - Test pressures - Appliances categories.
  • NF C32-075-1:1999 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1 : apparatus.
  • NF X20-704:2007 Class 2 electronic breath tester - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.

Professional Standard - Hydroelectric Power, Tester

  • SD 106-1982 Series Spectrum of Geotechnical Testing Instruments

Professional Standard - Water Conservancy, Tester

  • SL 119-1995 Calibrating methods of rock treaxial testing apparatus
  • SL 119-2012 Calibrating methods of rock triaxial testing apparatus
  • SL 414-2007 Calibration code for bitumen softening meter
  • SL 409-2007 Calibrating code for flow testing instrument prefabricated drains

国家市场监督管理总局、中国国家标准化管理委员会, Tester

  • GB/T 40961-2021 Calibration methods of rock triaxial testing apparatus
  • GB/T 19748-2019 Metallic materials—Charpy V-notch pendulum impact test—Instrumented test method
  • GB/T 37511-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Mixolab test

British Standards Institution (BSI), Tester

  • BS 756:1952 Specification for Dean and Stark apparatus
  • BS EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method
  • BS EN ISO 14556:2015 Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method
  • BS EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
  • BS EN ISO 14556:2023 Tracked Changes. Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method
  • BS EN ISO 3679:2022 Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
  • BS EN ISO 105-J05:2007 Textiles - Tests for colour fastness - Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCONO2)
  • BS ISO 4094:2005 Paper, board and pulps - International calibration of testing apparatus - Nomination and acceptance of standardizing and authorized laboratories

工业和信息化部, Tester

  • QB/T 2386-2017 Paper and cardboard short distance compression tester
  • YS/T 1186-2017 Falling sand tester for testing the wear resistance of anodized films and organic polymer films on aluminum surfaces

International Organization for Standardization (ISO), Tester

  • ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method
  • ISO 14556:2015 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method
  • ISO 14556 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
  • ISO 14556:2023 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
  • ISO 12710:2002 Non-destructive testing - Ultrasonic inspection - Evaluation electronic characteristics of untrasonic test instruments
  • ISO 3783:1980 Paper and board; Determination of resistance to picking; Accelerating speed method using the IGT tester (Electric model)
  • ISO/TR 6131:1986 Textile floor coverings; Tetrapod Walker apparatus; Constructional details and instructions for use
  • ISO 3783:2006 Paper and board - Determination of resistance to picking - Accelerated speed method using the IGT-type tester (electric model)
  • ISO 5470-1:2016 Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
  • ISO 14556:2000/Amd 1:2006 Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
  • ISO 4094:2005 Paper, board and pulps - International calibration of testing apparatus - Nomination and acceptance of standardizing and authorized laboratories
  • ISO 4094:1991 Paper, board and pulps; international calibration of testing apparatus; nomination and acceptance of standardizing and authorized laboratories
  • ISO 5530-1:1988 Wheat flour; physical characteristics of doughs; part 1: determination of water absorption and rheological properties using a farinograph
  • ISO 8252:1987 Anodized aluminium and aluminium alloys; Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus

Korean Agency for Technology and Standards (KATS), Tester

  • KS B ISO 14556:2002 Steel-Charpy V-notch pendulum impact test-Instrumented test method
  • KS B ISO 14556:2015 Steel－Charpy V－notch pendulum impact test－Instrumented test method
  • KS F 2508-2007 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
  • KS F 2508-2002 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
  • KS F 2508-1982 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
  • KS M 2670-1994 Glasswares for testing apparatus of petroleum products
  • KS M 2670-1999(2021) Glasswares for testing apparatus of petroleum products
  • KS B ISO 14556-2002(2012) Steel－Charpy V－notch pendulum impact test－Instrumented test method
  • KS B 5552-2004(2019) Impact testing machines for plastic matelials－Instrumentation
  • KS B ISO 12710:2005 Non-destructive testing－Ultrasonic inspection－Evaluating electronic characteristics of ultrasonic test instruments
  • KS K ISO TR 6131:2008 Textile floor coverings-Tetrapod walker apparatus-Constructional details and instructions for use
  • KS C IEC 61034-1:2008 Measurement of smoke density of cables burning under defined conditions－Part 1：Test apparatus
  • KS B 5551-2004(2019) Impact testing machines for metallic materials－Instrumentation
  • KS M ISO 4094:2016 Paper, board and pulps?International calibration of testing apparatus－Nomination and acceptance of standardizing and authorized laboratories
  • KS B 5551-2004 Impact testing machines for metallic materials－Instrumentation
  • KS B 5552-2004 Impact testing machines for plastic matelials－Instrumentation

Defense Logistics Agency, Tester

Professional Standard - Electricity, Tester

  • DL/T 1681-2016 Guidelines for Selection and Matching of High Voltage Test Instruments and Equipment
  • DL/T 2261-2021 Technical requirements for mobile hand-held electric tool insulation resistance tester

未注明发布机构, Tester

Japanese Industrial Standards Committee (JISC), Tester

  • JIS B 7755:2011 Charpy pendulum impact test for metal -- Instrumentation
  • JIS S 8602:1984 Test records
  • JIS C 3665-1-1:2007 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable -- Apparatus

American Society for Testing and Materials (ASTM), Tester

  • ASTM D5417-99(2003) Standard Practice for Operation of the Vettermann Drum Tester
  • ASTM D5417-99 Standard Practice for Operation of the Vettermann Drum Tester
  • ASTM D6450-99 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
  • ASTM D6450-16a Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
  • ASTM D4871-00 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
  • ASTM D5252-98a Standard Practice for the Operation of the Hexapod Drum Tester
  • ASTM D5251-98a Standard Practice for the Operation of the Tetrapod Walker Drum Tester
  • ASTM D5251-98a(2003) Standard Practice for the Operation of the Tetrapod Walker Drum Tester
  • ASTM D4871-06 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
  • ASTM D4871-11(2016) Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
  • ASTM D7094-04 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
  • ASTM D7094-04(2009) Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
  • ASTM D5417-11 Standard Practice for Operation of the Vettermann Drum Tester
  • ASTM D93-15 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
  • ASTM D4966-98 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
  • ASTM D5417-16 Standard Practice for Operation of the Vettermann Drum Tester
  • ASTM D4966-98(2007)e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
  • ASTM D4966-98(2004) Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
  • ASTM D4966-12(2016) Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
  • ASTM D4966-10 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
  • ASTM D5417-05 Standard Practice for Operation of the Vettermann Drum Tester
  • ASTM D6450-12e1 Standard Test Method for Flash Point by Continuously Closed Cup 40;CCCFP41; Tester
  • ASTM D5252-05 Standard Practice for the Operation of the Hexapod Drum Tester
  • ASTM D5251-05 Standard Practice for the Operation of the Tetrapod Walker Drum Tester
  • ASTM D4541-95e1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
  • ASTM D4541-02 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
  • ASTM D4060-14 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
  • ASTM D5252-15 Standard Practice for the Operation of the Hexapod Tumble Drum Tester
  • ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
  • ASTM D7094-12e1 Standard Test Method for Flash Point by Modified Continuously Closed Cup 40;MCCCFP41; Tester
  • ASTM D8174-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
  • ASTM D8175-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
  • ASTM D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
  • ASTM C501-84(2015) Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
  • ASTM C627-93(1999) Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
  • ASTM D3511/D3511M-15 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
  • ASTM E707-90(1996) Standard Test Method for Skid Resistance Measurements Using the North Carolina State University Variable-Speed Friction Tester
  • ASTM D4970/D4970M-16 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
  • ASTM D3512/D3512M-10e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
  • ASTM D3511/D3511M-13 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
  • ASTM D3512/D3512M-10e2 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
  • ASTM D3511/D3511M-10e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
  • ASTM F1442-92(1998) Standard Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance
  • ASTM F1442-92(2003) Standard Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance
  • ASTM D4970/D4970M-10e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester

Danish Standards Foundation, Tester

  • DS/EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method
  • DS/EN ISO 14556/A1:2006 Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
  • DS 1103.1:1976 Test methods for rigid flat sheets. Apparatus and general testing conditions

SE-SIS, Tester

  • SIS SS-EN 27 786-1992 Dental rotary instruments — Laborator/ abrasive instruments (ISO 7786:1990)
  • SIS SS-EN 27 787-1-1990 Dentistry — Dental rotary instruments — Cutters — Part 1: Steel laborator/ cutters (ISO 7787-1:1984)
  • SIS SS-EN 27 787-2-1990 Dentistry — Dental rotar/ instruments — Cutters — Part 2: Carbide laborator/ cutters (ISO 7787-2:1984)

RU-GOST R, Tester

  • GOST 8291-1983 Dead-weight preassure-gauge testers. General technical requirements
  • GOST 34238-2017 Petroleum products. Methods for determination of flash point by small scale closed cup tester
  • GOST 8.340-1978 State system for ensuring the uniformity of measurements. Dead-weight tester type MP-0,4 methods and means of verification

KR-KS, Tester

  • KS R ISO 6487-2017 Road vehicles — Techniques of measurement inimpact tests — Instrumentation
  • KS M ISO 4094-2016 Paper, board and pulps?International calibration of testing apparatus－Nomination and acceptance of standardizing and authorized laboratories

German Institute for Standardization, Tester

  • DIN EN 16280:2012 Breath alcohol test devices for general public - Requirements and test methods; German version EN 16280:2012
  • DIN 51350-4:2015 Testing of lubricants - Testing in the four-ball tester - Part 4: Determination of welding load of consistent lubricants
  • DIN EN ISO 14556:2006 Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000 + Amd.1:2006); English version of DIN EN ISO 14556:2006-10
  • DIN 53523-2:1991 Determination of Mooney viscosity of rubber; test apparatus
  • DIN EN ISO 14556:2023-08 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023); German version EN ISO 14556:2023
  • DIN 51350-4:1984 Testing of lubricants; testing by the Shell four-ball tester; determination of welding load of consistent lubricants
  • DIN EN ISO 14556:2017 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015); German version EN ISO 14556:2015
  • DIN EN ISO 14556:2016 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015); German version EN ISO 14556:2015
  • DIN 51350-5:1984 Testing of lubricants; testing by the Shell four-ball tester; determination of wear characteristics for consistent lubricants
  • DIN 51350-5:2015 Testing of lubricants - Testing in the four-ball tester - Part 5: Determination of wearing characteristics for consistent lubricants
  • DIN 51819-1:2016 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
  • DIN 51819-1:1999 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
  • DIN 51819-3:2005 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils, axial cylindrical roller bearing
  • DIN 51350-1:2010 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
  • DIN 51350-1:2015 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
  • DIN 51819-3:2016 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils - applied test bearing: axial cylindrical roller bearing
  • DIN EN 50267-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus; German version EN 50267-1:1998

Standard Association of Australia （SAA）, Tester

  • AS 1580.406.1:2004 Paints and related materials - Methods of test - Resistance to impact - Falling weight test (Gardner-type tester)

Professional Standard - Petroleum, Tester

  • SY/T 6703-2007 General specifications for core flowing system
  • SY 6703-2007 General technical specifications for core fluidity test instruments

Military Standard of the People's Republic of China-General Armament Department, Tester

  • GJB 3349A-2019 Calibration procedures for vacuum stability testers for explosives
  • GJB/J 3349-1998 Calibration procedures for vacuum stability testers for explosives
  • GJB 164.52-1986 Procedures for landing ship mooring and navigation tests Depth sounder testing
  • GJB 524.45-1988 Speedboat (planing boat) mooring and navigation test procedures log test
  • GJB 524.46-1988 Procedures for mooring and sailing test of speedboats (planing boats) Depth sounder test
  • GJB 350.61-1987 Surface combat ship mooring and navigation test procedures Depth sounder test

Lithuanian Standards Office , Tester

  • LST EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000)

European Committee for Standardization (CEN), Tester

  • EN ISO 14556:2023 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023)
  • EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
  • EN ISO 14556:2000 Steel - Charpy V-Notch Pendulum Impact Test - Instrumented Test Method Includes amendment A1:2006; ISO 14556:2000
  • FprEN ISO 14556 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO/FDIS 14556:2023)
  • EN ISO 14556:2015 Metallic materials - Charpy Vnotch pendulum impact test - Instrumented test method
  • EN 59:1977 Glass Reinforced Plastics: Measurement of Hardness by Means of a Barcol Impressor

ES-UNE, Tester

  • UNE-EN ISO 14556:2016 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015)

GM North America, Tester

  • GM GM9300P-2001 Impact Test for Plastic Materials (Instrumented or Non-Instrumented)

American National Standards Institute （ANSI), Tester

  • ANSI/ASTM D5650:1997 Test Method for Use of the Taber-Type Tester for Stiffness in the Expanded 0-10 Taber Stiffness Unit Range
  • ANSI/TAPPI T558 om-2010 Surface wettability and absorbency of sheeted materials using an automated contact angle tester

International Electrotechnical Commission (IEC), Tester

  • IEC 61083-1:2021 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
  • IEC 61034-1:1990 Measurement of smoke density of electric cables burning under defined conditions; part 1: test apparatus

PL-PKN, Tester

  • PN P04770-1986 Wool and woollike tops Determination of fibre length by means of an Almeter

NL-NEN, Tester

  • NEN 11034-1-1993 Insulated electric cables.Measurement of smoke density when burned under defined conditions.Part 1:Test apparatus(IEC 1034-1:1990)

Professional Standard - Energy, Tester

  • NB/SH/T 6017-2020 Test Method for Automatic Particle Counting and Particle Shape Classification of Oil Using a Direct Imaging Synthetic Test Apparatus

ZA-SANS, Tester

  • SANS 10361:2000 Textile floor coverings - Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers

Taiwan Provincial Standard of the People's Republic of China, Tester

  • CNS 13788-1996 Methods of Test for Water Vapor Transmission Rate of Plastic Films and Sheets (Instrument Method)

  Flame retardant tester, Flash point tester, Aging Tester, Drop Weight Tester, Viscometer, Hydraulic tester, Material Tester, Anti-skid tester, Anti-skid tester, Microwave tester, Wear Tester, Viscosity tester, Compression tester, Spring Tester, Solid Tester, Cavitation tester, Abrasion Tester, Sealing Tester, closed mouth test, Tester.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved