ZH
RU
ES

Methanol separator

Methanol separator, Total:311 items.

In the international standard classification, Methanol separator involves: Organic chemicals, Installations in buildings, Aerospace fluid systems and components, Energy and heat transfer engineering in general, Fuels, Metrology and measurement in general, Fluid storage devices, Products of the chemical industry, Water quality, Analytical chemistry, Packaging materials and accessories, Fuel cells, Hydraulic fluids, Beverages, Products of the textile industry, Bottles. Pots. Jars, Capacitors, Medical sciences and health care facilities in general, Air quality, Materials and articles in contact with foodstuffs, Rubber and plastics products, Kitchen equipment, Fertilizers, Food products in general, Fibre optic communications, Metalliferous minerals, Plastics, Wastes, Ferroalloys, Ferrous metals, Road vehicle systems, FOOD TECHNOLOGY, Non-ferrous metals, Textile fibres, Laboratory medicine, Paint ingredients, Ceramics, Petroleum products in general, Audio, video and audiovisual engineering, Tobacco, tobacco products and related equipment.

British Standards Institution (BSI), Methanol separator

BS 506-1:1987 Methanol for industrial use - Specification for methanol
BS 506-2:1984 Methanol for industrial use - Methods of test
BS EN 15721:2013 Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method
BS EN 15721:2009 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and volatile impurities - Gas chromatographic method
BS EN 13466-1:2001 Fertilizers. Determination of water content (Karl Fischer methods) - Methanol as extracting medium
BS EN 60384-11:2008 Fixed capacitors for use in electronic equipment - Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
BS EN 60384-2:2005 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors
BS EN 60384-2:2006 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors
BS EN IEC 60384-11:2019 Fixed capacitors for use in electronic equipment - Sectional specification. Fixed polyethylene-terephthalate film dielectric metal foil DC capacitors
BS EN 60384-19:2015 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
BS EN IEC 60384-23:2023 Fixed capacitors for use in electronic equipment - Sectional specification. Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors
BS EN 16761-2:2015 Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography. Method using heart cut technique
BS EN 60384-19:2006 Fixed capacitors for use in electronic equipment — Part 19: Sectional specification — Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
BS EN 60384-2:2012 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
BS EN IEC 60384-19:2022 Fixed capacitors for use in electronic equipment - Sectional specification: Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors
18/30355840 DC BS EN IEC 60384-11. Fixed capacitors for use in electronic equipment. Part 11. Sectional specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
21/30413489 DC BS EN 60384-19. Fixed capacitors for use in electronic equipment. Part 19. Sectional specification: Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors
21/30413497 DC BS EN IEC 60384-23. Fixed capacitors for use in electronic equipment. Part 23. Sectional specification. Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors
19/30372505 DC BS EN 60384-2. Fixed capacitors for use in electronic equipment. Part 2. Sectional specification. Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors

未注明发布机构, Methanol separator

BS 506-1:1987(2011) Methanol for industrial use — Part 1 : Specification for methanol
BS 506-2:1984(2011) Methanol for industrial use — Part 2 : Methods of test
BS 6392-6:1983(2011) Testing of ethanol for industrial use — Part 6 : Method for determination of methanol content [ 0.01%(V/V) to 0.20%(V/V)] (photometric method)
BS 6392-7:1983(2011) Testing of ethanol for industrial use — Part 7 : Method for determination of methanol content [ 0.10%(V/V) to 1.50%(V/V)] (visual colorimetric method)
BS EN IEC 60384-11:2019(2020) Fixed capacitors for use in electronic equipment Part 11 : Sectional specification — Fixed polyethylene - terephthalate film dielectric metal foil DC capacitors
BS EN 130100:1998 Harmonized system ofquality assessment for electronic components Sectional specification : fixed polyethylene - terephthalate film dielectric metal foil capacitors for direct current

HU-MSZT, Methanol separator

MSZ 9524-1959

Group Standards of the People's Republic of China, Methanol separator

T/CSIA 002-2020 Flameless methanol heaters
T/CMA 037-2021 Calibration method for methanol alarm detectors
T/CI 058-2022 Polyethylene terephthalate（PET）containers for food packaging
T/NAIA 014-2020 Determination of Moisture Content in Methanol by Gas Chromatography
T/SZTIA 002-2020 Textiles－Quantitative analysis of PTT and PET mixture－DSC method
T/CRRA 0307-2023 Quality grading evaluation and acceptance for waste PET bottle brick
T/GDC 36-2019 Electric Vehicle Intelligent Charging System Part 1: Methanol Extended Range Mobile Charging System
T/CWAN 0029.5-2021 Methods for chemical analysis of nickel-based welding materials - Part 5: Determination of phosphorus content by n-butanol-chloroform extraction spectrophotometry

Professional Standard - Public Safety Standards, Methanol separator

GA/T 105-1995 Qualitative analysis and quantitative analysis of ethanol, methanol, n-propanol in blood and urine

RO-ASRO, Methanol separator

SR ISO 485:1996 Aircraft - water - methanol pressure connections

Professional Standard - Military and Civilian Products, Methanol separator

WJ 417-1994 Specification for methanol glue for optical instruments

工业和信息化部, Methanol separator

WJ/T 417-2014 Specification for methanol glue for optical instruments
HG/T 5415-2018 Analysis method of chemical components of catalysts for methanol gas-phase dehydration to dimethyl ether
HG/T 5193-2017 Analysis method of chemical components of methanol hydrogen production catalyst
HG/T 5191-2017 Analysis method of chemical components of methanol to light olefins catalyst
YB/T 5043-2012 Determination of molybdenum phosphorus oxide content n-butanol-chloroform extraction spectrophotometry
YD/T 1118.1-2019 Secondary coating materials for optical fibers Part 1: Polybutylene terephthalate

Canadian General Standards Board （CGSB), Methanol separator

CGSB 1-GP-71 METH 84.1-1982 Methods of Testing Paints and Pigments Methyl Alcohol Content Method for Determining Methyl Alcohol Content

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Methanol separator

GB 29436.1-2012 The norm of energy consumption per unit product of methanol.Part 1:Coal to methanol
GB 29436.2-2015 Norm of energy consumption per unit product of methanol.Part 2:Natural gas to methanol
GB 29436.3-2015 Energy consumption quota per unit product of methanol Part 3: Synthetic ammonia co-production of methanol
GB 29436.4-2015 Energy consumption quota per unit product of methanol Part 4: Methanol production from coke oven gas
GB/T 18916.35-2018 Norm of water intake.Part 35: Methyl alcohol produced by coal
GB 13114-1991 Hygienic standard for polyethylene terephthalate resin used as food contailners and packaging materials
GB/T 20186.1-2006 Secondary coating materials used for optical fiber.Part 1: Polybutylene terephthalate
GB 13113-1991 Hygienic standard for polyethylene terephthalate products used as food containers and packaging materials
GB/T 6346.11-2015 Fixed capacitors for use in electronic equipment.Part 11:Sectional specification.Fixed polyethylene-terephthalate film dielectric metal foil d.c.capacitors
GB/T 223.75-1991 Methods for chemical analysis of iron,steel and alloy--The methanol distillation-curcumin photometric method for the determination of boron content
GB/T 8638.12-1988 Nickel base alloy powder--Determination of phosphorus content--N-butyl alcohol-chloroform extraction spectrophotometric method
GB/T 2910.9-2009 Textiles.Quantitative chemical analysis.Part 9:Mixtures of acetate and triacetate fibres(method using benzyl alcohol)
GB/T 6346-1986 Fixed capacitors for use in electronic equipment--Part 11: Sectional specification:Fixed polyethylene-terephthalate film dielectric metal foil D.C capacitors

国家市场监督管理总局、中国国家标准化管理委员会, Methanol separator

GB/T 36563-2018 Methanol to gasoline component oil
GB/T 40006.9-2021 Plastics—Recycled plastics—Part 9:Poly(ethylene terephthalate) (PET) materials
GB/T 39827.1-2021 Plastics—Post-consumer poly(ethylene terephthalate)(PET)bottle recyclates—Part 1:Designation system and basis for specifications

YU-JUS, Methanol separator

JUS H.B8.271-1983 Formaldehyde solutions for industrial use. Determination of methanol content
JUS H.B8.264-1983 Methanol for industrial u se. Determination of vvater content by the Karl Ficher method
JUS H.B8.267-1983 Methanol for industrial use. Determination of iron content. 1, W-Phenanthroline photometric method
JUS H.G8.217-1985 Reagents. Methanol. Determination ofiron content. 1,10-Phenanthrolinespectrophotometric method
JUS H.G8.216-1985 Reagents. Methano/. Determination ot water content. Karl Fischer method
JUS H.B8.250-1997 Basic petroleum products - Determination oj methanol content in C-3 and C-4 hydrocarbons products - Gas chromatographic method
JUS F.S3.137-1982 Testing (Quantitative analysis) mixtures od fibres. Binary mixtures of acetate and triacetate fibres. Benzyl alcohol method

American Society for Testing and Materials (ASTM), Methanol separator

ASTM E346-99(2003)e1 Standard Test Method for Analysis of Methanol
ASTM E346-99 Standard Test Method for Analysis of Methanol
ASTM E346-99(2003) Standard Test Method for Analysis of Methanol
ASTM E346-08e1 Standard Test Methods for Analysis of Methanol
ASTM E346-08 Standard Test Method for Analysis of Methanol
ASTM UOP569-79 Methanol in Petroleum Distillates and LPG by Gas Chromatography
ASTM D7716-11a Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
ASTM D8195-18 Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting
ASTM D4815-99 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C₁ to C₄ Alcohols in Gasoline by Gas Chromatography
ASTM D4815-99e1 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C₁ to C₄ Alcohols in Gasoline by Gas Chromatography
ASTM D4815-15a Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
ASTM D5991-17 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake

Shanxi Provincial Standard of the People's Republic of China, Methanol separator

DB14/T 178-2013 Methanol gasoline component oil for vehicles
DB14/T 2013-2020 Methanol Determination of Water Quality Chromotropic Acid Spectrophotometry
DB14/T 2014-2020 Determination of Methanol in Ambient Air and Exhaust Gas Chromotropic Acid Spectrophotometry

Professional Standard - Agriculture, Methanol separator

950药典二部-2015 The first part eight draw benzyl alcohol
1006药典二部-2020 The first part eight draw benzyl alcohol
778药典二部-2010 The first part eight draw benzyl alcohol
948药典二部-2015 Part I
1004药典二部-2020 Part I
776药典二部-2010 Part I
588兽药典一部-2015 Text Variety Part Two Eight Draws Benzyl Alcohol
949药典二部-2015 The first part of Bahua Estradiol Benzoate Injection
1005药典二部-2020 The first part of Bahua Estradiol Benzoate Injection
777药典二部-2010 The first part of Bahua Estradiol Benzoate Injection
150兽药典一部-2015 Text Variety Part I Eight Drawing Estradiol Benzoate
151兽药典一部-2015 Variety of text Part I Bahua Estradiol Benzoate Injection
空气和废气监测分析方法 6.1.6-2003 Part Six Analysis of Organic Pollutants Chapter One Volatile Organic Compound Hexamethanol

Hebei Provincial Standard of the People's Republic of China, Methanol separator

DB13/T 1481-2011 Methanol gasoline component oil for vehicles
DB13/T 1481-2017 General Technical Requirements for Methanol Gasoline Component Oils for Vehicles
DB13/T 5189.3-2020 Detection of Hazardous Components in Natural Plant Extracts Part 3: Determination of Residues of 5 Organic Solvents, n-Hexane, Acetone, Ethyl Acetate, Methanol and Ethanol
DB13/T 1081.28-2009 Plastics for food packaging materials and products - Part 28: Determination of specific migration of 1,1,1-trimethylolpropane

ES-AENOR, Methanol separator

AENOR, Methanol separator

UNE 30032:1953 METHANOL CHEMICALLY PURE FOR ANALYSIS.
UNE-EN 15721:2014 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
UNE-EN 13466-1:2002 Fertilizers - Determination of water content (Karl Fischer methods) - Part 1: Methanol as extracting medium

International Organization for Standardization (ISO), Methanol separator

ISO 485:1973 Aircraft water-methanol pressure connections
ISO 1388-7:1981 Ethanol for industrial use; Methods of test; Part 7: Determination of methanol content (methanol contents between 0,01 and 0,20 % (V/V)); Photometric method
ISO 1388-8:1981 Ethanol for industrial use; Methods of test; Part 8: Determination of methanol content (methanol contents between 0,10 and 1,50 % (V/V)); Visual colorimetric method
ISO 6744-2:1999 Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content
ISO 16373-3:2014 Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol)
ISO 22634-1:2017 Cigarettes - Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS - Part 1: Method using methanol as extraction solvent

国家能源局, Methanol separator

NB/T 12001-2015 Methanol synthesis reactor manufacturing technical conditions

Korean Agency for Technology and Standards (KATS), Methanol separator

KS M ISO 1388-8-2017(2022) Ethanol for industrial use — Methods of test — Part 8: Determination of methanol content[methanol contents between 0.10 % and 1.50 %(V/V)] — Visual method
KS M ISO 1388-7-2017(2022) Ethanol for industrial use — Methods of test — Part 7: Determination of methanol content[methanol contents between 0.01 % and 0.20 %(V/V)] — Photometric method
KS M ISO 1388-7:2002 Ethanol for industrial use－Methods of test－Part 7：Determination of methanol content[methanol contents between 0.01 and 0.20 %(V/V)]－Photometric method
KS M ISO 1388-8:2002 Ethanol for industrial use-Methods of test-Part 8:Determination of methanol content [methanol contents between 0.10 and 1.50 %(V / V)]-Visual method
KS M ISO 1388-7:2017 Ethanol for industrial use — Methods of test — Part 7: Determination of methanol content[methanol contents between 0.01 % and 0.20 %(V/V)] — Photometric method
KS M ISO 1388-8:2017 Ethanol for industrial use — Methods of test — Part 8: Determination of methanol content[methanol contents between 0.10 % and 1.50 %(V/V)] — Visual method
KS C IEC 60384-2:2018 Fixed capacitors for use in electronic equipment — Part 2: Sectional specification — Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
KS E ISO 5416-2011(2016) Direct reduced iron－Determination of metallic iron－Bromine-methanol titrimetric method
KS C 6384-19-2001(2016) Fixed capacitors for use in electronic equipment－Part 19：Sectional specification：Fixed metallizedpolyethylene-terephthalate film dielectric chip d.c. capacitors
KS C 6384-19-2001(2021) Fixed capacitors for use in electronic equipment－Part 19：Sectional specification：Fixed metallizedpolyethylene-terephthalate film dielectric chip d.c. capacitors
KS C IEC 60384-2-2023 Fixed capacitors for electronic equipment Part 2: Subspecification for fixed metallized polyethylene terephthalate film dielectric dc capacitors
KS C IEC 60384-19:2021 Fixed capacitors for use in electronic equipment —Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
KS M 1989-2002(2012) Phthalic and adipic for industrial use－Determination of free alcohols content－Spectrometric method
KS C 6384-11-2001 Fixed capacitors for use in electronic equipment－Part 11：Sectional specification：Fixed polyethylene-terephthalate film dielectric meta foil d.c. capacitors
KS M ISO 6744-1:2003 Binders for paints and varnishes－Alkyd resins－Part 1：General methods of test
KS M ISO 6744-2:2019 Binders for paints and varnishes — Alkyd resins — Part 2: Determination of phthalic anhydride content
KS L ISO 17168-5:2020 Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment —Part 5: Remova
KS C 6384-191-2001(2011) Fixed capacitors for use in electronic equipment－Part 19：Blank detail specification：Fixed metallizedpolyethylene-terephthalate film dielectric chip d.c. capacitors.Assessment level E

中华人民共和国国家卫生和计划生育委员会, Methanol separator

GBZ/T 300.84-2017 Determination of Toxic Substances in Workplace Air Part 84: Methanol, Propanol and Octanol

TR-TSE, Methanol separator

TS 2954-1978 Aircraft Water - Methanol Pressure Connections - Dimensions

Professional Standard-Packaging, Methanol separator

BB/T 0060-2012 Packaging Container Polyethylene Terephthalate (PET)

Professional Standard - Chemical Industry, Methanol separator

HG/T 6152-2023 Analytical method for chemical composition of catalyst for dehydrogenation of methyl isobutyl methanol to methyl isobutyl ketone
HG/T 4198-2011 Method for Analyzing Chemical Components of Methanol Synthesis Catalysts
HG/T 5189~5193-2017 Analysis methods for chemical composition of organic sulfur conversion and absorption catalysts at room temperature and methanol hydrogen production catalysts, test methods for reaction performance of methanol to propylene catalysts, chemical composition
HG/T 5281~5284-2017 Methyl-terminated allyl alcohol polyether, dispersant IW, leveling agent TAN and antistatic agent P (2017)

KR-KS, Methanol separator

KS M ISO 1388-8-2017 Ethanol for industrial use — Methods of test — Part 8: Determination of methanol content[methanol contents between 0.10 % and 1.50 %(V/V)] — Visual method
KS M ISO 1388-7-2017 Ethanol for industrial use — Methods of test — Part 7: Determination of methanol content[methanol contents between 0.01 % and 0.20 %(V/V)] — Photometric method
KS C IEC 60384-11-2018(2023) Fixed capacitors for use in electronic equipment－Part 11：Sectional specification：Fixed polyethylene-terephthalate film dielectric meta foil d.c. capacitors
KS C IEC 60384-2-2018 Fixed capacitors for use in electronic equipment — Part 2: Sectional specification — Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
KS C IEC 60384-2-2018(2023) Fixed capacitors for use in electronic equipment — Part 2: Sectional specification — Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
KS C IEC 60384-19-2021 Fixed capacitors for use in electronic equipment —Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
KS M ISO 6744-2-2019 Binders for paints and varnishes — Alkyd resins — Part 2: Determination of phthalic anhydride content
KS L ISO 17168-5-2020 Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment —Part 5: Remova

IECQ - IEC: Quality Assessment System for Electronic Components, Methanol separator

QC 300401/ HU 0001-1982 Metallized Polyethylene-Terephthalate Capacitors
QC 300401/ CS 0001-1991 Fixed Metallized Polyethylene-Terephthalate Film Dielectric d.c. Capacitors
QC 300401/ RU 0003-1993 Electronic Equipment: Fixed Metallized Polyethylene-Terephthalate Film Dielectric d.c. Capacitors Type K73-17
QC 300400-2005 Fixed capacitors for use in electronic equipment Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors (Edition 3; Same as IEC 60384-2)
QC 302200-2006 Fixed capacitors for use in electronic equipment – Part 19: Sectional specification – Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (Edition 2; ED 1)
QC 300401/ KR 0001-1991 Detail Specification: Fixed Metallized Polyethylene Terephthalate Film Dielectric d.c. Capacitors Assessment Level: E
PQC 87/US 0001 ISSUE 1-1990 Capacitors for Use in Electrotechnical Equipment: Detail Specification: Fixed Metallized Polyethylene- Terephthalate Film Dielectric Chip Capacitors for Direct Current-Encapsulated

Danish Standards Foundation, Methanol separator

DS/EN 15721:2013 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
DS/EN 130100:2000 Sectional Specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current
DS/EN 60384-11:2008 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
DS/EN 60384-2:2012 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
DS/EN IEC 60384-2:2021 Fixed capacitors for use in electronic equipment – Part 2: Sectional specification – Fixed metallized polyethylene-terephthalate film dielectric DC capacitors
DS/EN 13466-1:2002 Fertilizers - Determination of water content (Karl Fischer methods) - Part 1: Methanol as extracting medium
DS/EN 130101:2000 Sectional Specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current - Assessment level E
DS/EN 130102:2000 Sectional Specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current - Assesment level EZ
DS/EN 60384-19:2006 Fixed capacitors for use in electronic equipment – Part 19: Sectional specification – Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
DS/EN 60384-23:2005 Fixed capacitors for use in electronic equipment -- Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
DS/EN ISO 6744-2:2004 Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content

Occupational Health Standard of the People's Republic of China, Methanol separator

GBZ/T 300.97-2017 Determination of Toxic Substances in Workplace Air Part 97: Dipropylene Glycol Methyl Ether and 1-Methoxy-2-Propanol

CZ-CSN, Methanol separator

CSN 56 0210-12-1994 Testing methods of alcoholic bevereges. Determination of Methylalcohol, Esters, Aldehydes and Heigh Molecular Weight lcohols
CSN 50 0270-1986 Benzene-Alcohol and Dichlor- methane Solubles in Wood and Pulp

Lithuanian Standards Office , Methanol separator

LST EN 15721-2009 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and volatile impurities - Gas chromatographic method
LST EN 130100-2001 Sectional specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current
LST EN 13466-1-2005 Fertilizers - Determination of water content (Karl Fischer methods) - Part 1: Methanol as extracting medium
LST EN 60384-11-2008 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors (IEC 60384-11:2008)
LST EN 60384-2-2012 Fixed capacitors for use in electronic equipment -- Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (IEC 60384-2:2011)
LST EN IEC 60384-2:2021 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric DC capacitors (IEC 60384-2:2021)
LST EN 60384-19-2006 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2006)
LST EN 60384-19-2006/AC-2007 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2006)
LST EN 60384-23-2005 Fixed capacitors for use in electronic equipment. Part 23: Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors (IEC 60384-23:2005)

Heilongjiang Provincial Standard of the People's Republic of China, Methanol separator

DB23/T 1877-2017 Determination of Methanol Purge Gas Components by Gas Chromatography

CEN - European Committee for Standardization, Methanol separator

PREN 15721-2012 Ethanol as a blending component for petrol - Determination of higher alcohols@ methanol and volatile impurities - Gas chromatographic method

Military Standard of the People's Republic of China-General Armament Department, Methanol separator

GJB 533.26-1988 Detection methods for 45 components of submarine cabin air. Determination of methanol, ethanol, acetaldehyde, and methylene chloride content by gas chromatography.

Association Francaise de Normalisation, Methanol separator

NF M07-131*NF EN 15721:2013 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
NF T20-711:1967 Chemical analysis of methanol. Determination of permanent acidity with phenol red.
NF T20-713:1967 Chemical analysis of methanol. Determination of iron by the method in standard NF T 20-613 (preparation of test sample).
NF EN 16761-1:2016 Carburants pour automobiles - Détermination de la teneur en méthanol dans le carburant éthanol (E85) pour automobiles par chromatographie en phase gazeuse - Partie 1 : méthode avec une seule colonne
NF X20-530:1984 Natural gas. Determination of water and methanol contents. Gas chromatographic method.
NF EN 16761-2:2016 Carburants pour automobiles - Détermination de la teneur en méthanol dans le carburant éthanol (E85) pour automobiles par chromatographie en phase gazeuse - Partie 2 : méthode 'heart-cutting'
NF C93-112-11*NF EN IEC 60384-11:2019 Fixed capacitors for use in electronic equipment - Part 11 : sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil DC capacitors
NF C93-112-2*NF EN IEC 60384-2:2021 Fixed capacitors for use in electronic equipment - Part 2 : sectional specification - Fixed metallized polyethylene-terephthalate film dielectric DC capacitors
NF EN 13466-1:2002 Engrais - Détermination de la teneur en eau (Méthodes Karl Fischer) - Partie 1 : le méthanol comme milieu d'extraction
NF M07-162-1*NF EN 16761-1:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
NF C93-112-23*NF EN 60384-23:2015 Fixed capacitors for use in electronic equipment - Part 23 : sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
NF M07-162-2*NF EN 16761-2:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2 : method using heart cut technique
NF EN IEC 60384-2:2021 Condensateurs fixes utilisés dans les équipements électroniques - Partie 2 : spécification intermédiaire - Condensateurs fixes pour courant continu à diélectrique en film de téréphtalate de polyéthylène métallisé
NF G06-006-9:2010 Textiles - Quantitative chemical analysis - Part 9 : mixtures of acetate and triacetate fibres (method using benzyl alcohol).
NF EN ISO 16373-3:2014 Textiles - Colorants - Partie 3 : méthode de détermination de certains colorants cancérigènes (méthode à la triéthylamine et au méthanol)
NF EN ISO 6744-2:2004 Liants pour peintures et vernis - Résines alkydes - Partie 2 : détermination de la teneur en anhydride phtalique
NF EN ISO 1833-9:2019 Textiles - Analyse chimique quantitative - Partie 9 : mélanges d'acétate avec certaines autres fibres (méthode à l'alcool benzylique)
NF G08-018-3*NF EN ISO 16373-3:2014 Textiles - Dyestuffs - Part 3 : method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol)
NF T30-045-2*NF EN ISO 6744-2:2004 Binders for paints and varnishes - Alkyd resins - Part 2 : determination of phthalic anhydride content.
NF EN 60384-23:2015 Condensateurs fixes utilisés dans les équipements électroniques - Partie 23 : spécification intermédiaire - Condensateurs fixes pour montage en surface pour courant continu à diélectrique en film de polynaphtalate d'éthylène métallisé
NF U42-602-1*NF EN 13466-1:2002 Fertilizers - Determination of water content (Karl Fischer methods) - Part 1 : methanol as extracting medium.
NF T20-811:1983 Butadiene for industrial use. Determination of tert-butyl-catechol (tbc). 4-(1,1-dimethylethyl)-1,2 benzenediol. Spectrometric method.
NF EN IEC 60384-11:2019 Condensateurs fixes utilisés dans les équipements électroniques - Partie 11 : spécification intermédiaire - Condensateurs fixes pour courant continu à diélectrique en film de polytéréphtalate d'éthylène à armatures en feuilles métalliques

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Methanol separator

GB/T 33983.1-2017 Direct methanol fuel cell system—Part 1: Safty
GB/T 33983.2-2017 Direct methanol fuel cell system—Part 2：Performance test method

German Institute for Standardization, Methanol separator

DIN 51604-2:1984 Methanolic FAM testing fluid for polymer materials; composition and requirements
DIN EN 15721:2013-12 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method; German version EN 15721:2013
DIN 51604-3:1984 Methanolic lower layer FAM testing fluid for polymer materials; composition and requirements
DIN EN 15721:2013 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method; German version EN 15721:2013
DIN EN 15721:2009 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and volatile impurities - Gas chromatographic method; German version EN 15721:2009
DIN EN 13466-1:2002 Fertilizers - Determination of water content (Karl Fischer methods) - Part 1: Methanol as extracting medium; German version EN 13466-1:2001
DIN 51604-2:2020 FAM-testing fluid for polymer materials - Composition and requirements - Part 2: Testing Fluid B, containing methanol
DIN 51604-2:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 2: Testing Fluid B, containing methanol
DIN EN IEC 60384-2:2022-08 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric DC capacitors (IEC 60384-2:2021); German version EN IEC 60384-2:2021 / Note: DIN EN 60384-2 (2012-09) remai...
DIN 51604-3:2020 FAM-testing fluid for polymer materials - Composition and requirements - Part 3: Testing Fluid C, methanol containing lower layer
DIN EN IEC 60384-11:2021-07 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil DC capacitors (IEC 60384-11:2019 + COR1:2020); German version EN IEC 60384-11:2019 + AC:2020 / Note: DIN E...
DIN EN 13466-1:2002-01 Fertilizers - Determination of water content (Karl Fischer methods) - Part 1: Methanol as extracting medium; German version EN 13466-1:2001
DIN EN 16761-1:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
DIN 51604-3:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 3: Testing Fluid C, methanol containing lower layer
DIN EN 16761-2:2016-02 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique; German version EN 16761-2:2015
DIN EN 60384-23:2016-02 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors (IEC 60384-23:2015); German version EN 60384-23:2015 / Note: DIN EN 60384-23 (20...
DIN EN IEC 60384-23:2022-05 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors (IEC 40/2841/CD:2021); Text in German and English / Note: Date of issue 2022-04-...
DIN EN 16761-2:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
DIN EN IEC 60384-2:2020 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (IEC 40/2673/CD:2019); Text in German and English
DIN EN 60384-19:2016-04 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2015); German version EN 60384-19:2015 / Note: DIN EN 60384-19...
DIN EN ISO 6744-2:2004-09 Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999); German version EN ISO 6744-2:2004
DIN EN 16761-1:2016-02 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique; German version EN 16761-1:2015
DIN EN ISO 6744-2:2004 Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999); German version EN ISO 6744-2:2004
DIN EN IEC 60384-19:2022 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors (IEC 40/2823/CD:2021); Text in German and English
DIN EN IEC 60384-19:2022-03 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors (IEC 40/2823/CD:2021); Text in German and English / Note: Date of issue 2022-0...
DIN 10779:2011-03 Analysis of coffee and coffee products - Determination of 16-O-methyl cafestol content of roasted coffee - HPLC-method
DIN EN ISO 16373-3:2014-10 Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) (ISO 16373-3:2014); German version EN ISO 16373-3:2014

European Committee for Standardization (CEN), Methanol separator

EN 15721:2009 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and volatile impurities - Gas chromatographic method
EN 15721:2013 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
EN 16593:2014 Packaging - Rigid plastic containers - PET finish BVS 30H60
EN 16592:2014 Packaging - Rigid plastic containers - PET finish 29/25 (12@6)
EN 16594:2014 Packaging - Rigid plastic containers - PET finish 26/22 (12@0)
EN 16761-2:2015 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
EN 16761-1:2015 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
EN 60384-23:2005 Fixed capacitors for use in electronic equipment — Part 23: Sectional specification — Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
EN 13466-1:2001 Fertilizers - Determination of water content (Karl Fischer methods) Part 1: Methanol as extracting medium
EN ISO 1833-9:2019 Textiles - Quantitative chemical analysis - Part 9: Mixtures of acetate with certain other fibres (method using benzyl alcohol) (ISO 1833-9:2019)
EN ISO 1833-9:2010 Textiles - Quantitative chemical analysis - Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) (ISO 1833-9:2006)

Natural Gas Processor's Association (NGPA), Methanol separator

GPA RR-106-1987 Influence of High Concentrations of Methanol on Hydrate Formation and the Distribution of Glycol in Liquid-Liquid Mixtures

UY-UNIT, Methanol separator

UNIT 140-1960

GM North America, Methanol separator

GM 9985670-2010 Windshield Washer Solution, Concentrate, 99% Methanol (Issue 3)

RU-GOST R, Methanol separator

GOST 33833-2016 Spirits. Gas-chromatographic method for determination of volume fraction of methanol
GOST EN 13466-1-2013 Fertilizers. Determination of water content (Karl Fischer methods). Part 1. Methanol as extracting medium
GOST R 55997-2014 Stable gas condensate, wide fraction of light hydrocarbons, liquefied petroleum gases. Determination of methanol by gas chromatography
GOST R ISO 16373-3-2016 Textiles. Dyestuffs. Part 3. Method for the determination of certain carcinogenic dyestuffs (method using triethylamine/methanol)
GOST ISO 1833-9-2013 Textiles. Quantitative chemical analysis. Part 9. Mixtures of acetate and triacetate fibres (method using benzyl alcohol)

SE-SIS, Methanol separator

SIS SS 02 81 70-1983 Determination of chlorophyll a in water - Extraction with methanol - Spectrophotometric method

US-CFR-file, Methanol separator

CFR 40-1065.269-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.269:Photoacoustic analyzer for ethanol and methanol.
CFR 40-721.10690-2013 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10690:Benzenedicarboxylic acid, polymer with substituted alkanediol, dodecanedioic acid, 1,2-ethanediol, alkanedioic acid, alkanediol,.alpha.-hydro-.omega.-hydroxyp

CENELEC - European Committee for Electrotechnical Standardization, Methanol separator

EN 130100:1997 Sectional Specification: Fixed Polyethylene-Terephtalate Film Dielectric Metal Foil Capacitors for Direct Current

Jilin Provincial Standard of the People's Republic of China, Methanol separator

DB22/T 395.5-2017 Physical and chemical testing methods for health care products Part 5: Determination of methanol

Professional Standard - Energy, Methanol separator

DL/T 2445-2021 Determination of Methanol Content in Running Transformer Oil by Gas Chromatography-Mass Spectrometry

Professional Standard - Non-ferrous Metal, Methanol separator

YS/T 426.6-2000 Method for chemical analysis of antimony-beryllium pellets.Determination of beryllium oxide content.Bromine methanol method
YS/T 539.12-2006 Nickel-based alloy powder chemical analysis method n-butanol-chloroform extraction spectrophotometric determination of phosphorus content
YS/T 539.12-2009 Methods for chemical analysis of nickel base alloy powder.Part 12:Determination of phosphorus content.N-butyl alcohol-chloroform extraction spectrophotometry

TH-TISI, Methanol separator

TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)
TIS 1182.18-1999 Standard test methods for petroleum and petroleum products.part 18: determination of methyl fertiary-butylether, ethyl tertiary-butyl ether,-tertiary amyl ether, diisopropylether, tertiary-amyl alcohol and c1 to c4 alcohols in gasoline by gas chromatograp

BE-NBN, Methanol separator

NBN T 52-017-1990 Analysis of liquid minerai oil hydrocarbons - Gas chromatographic analysis - Methyl-tert-butylether

ECIA - Electronic Components Industry Association, Methanol separator

EIA-60384-11-2014 Fixed Capacitors for Use in Electronic Equipment – Part 11: Sectional Specification – Fixed Polyethylene-Terephthalate Film Dielectric Metal Foil d.c. Capacitors
EIA-60384-2-2014 Fixed Capacitors for Use in Electronic Equipment – Part 2: Sectional Specification – Fixed Metallized Polyethylene Terephthalate Film Dielectric d.c. Capacitors
EIA-60384-23-2017 Fixed Capacitors for Use in Electronic Equipment - Part 23: Sectional Specification - Fixed Metallized Polyethylene Naphthalate Film Dielectric Surface Mount d.c. Capacitors
EIA-60384-23-2014 Fixed Capacitors for Use in Electronic Equipment – Part 23: Sectional Specification – Fixed Surface Mount Metallized Polyethylene Naphthalate Film Dielectric DC Capacitors
580A000-1992 Sectional Specification for Fixed Chip Capacitors with Metallized Electrodes and Polyethylene-Terephthalate Dielectric for Use in Electronic Equipment
580A0AC-1998 Detail Specification for Fixed Metallized Polyethylene Terephthalate Film Dielectric DC Capacitors Axial Leaded

Electronic Components, Assemblies and Materials Association, Methanol separator

ECA EIA-60384-11-2014 Fixed Capacitors for Use in Electronic Equipment - Part 11: Sectional Specification - Fixed Polyethylene-Terephthalate Film Dielectric Metal Foil d.c. Capacitors
ECA EIA-60384-2-2014 Fixed Capacitors for Use in Electronic Equipment - Part 2: Sectional Specification - Fixed Metallized Polyethylene Terephthalate Film Dielectric d.c. Capacitors
ECA EIA-60384-23-2014 Fixed Capacitors for Use in Electronic Equipment - Part 23: Sectional Specification - Fixed Surface Mount Metallized Polyethylene Naphthalate Film Dielectric DC Capacitors

European Committee for Electrotechnical Standardization（CENELEC）, Methanol separator

EN IEC 60384-11:2019 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil DC capacitors
EN 60384-11:2008 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
EN IEC 60384-19:2022 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors
EN 60384-19:2015 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
EN 60384-23:2015 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
EN IEC 60384-23:2023 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors

International Electrotechnical Commission (IEC), Methanol separator

IEC 60384-11:2019 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil DC capacitors
IEC 60384-11:2019/COR1:2020 Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil DC capacitors
IEC 60384-2:2021 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric DC capacitors
IEC 60384-23:2023 RLV Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors
IEC 60384-23:2015 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount d.c. capacitors
IEC 60384-19:2022 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors
IEC 60384-23:2023 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors

ES-UNE, Methanol separator

UNE-EN IEC 60384-2:2021 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric DC capacitors (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN 60384-2:2012 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (Endorsed by AENOR in June of 2012.)
UNE-EN IEC 60384-11:2019/AC:2020-05 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil DC capacitors (Endorsed by Asociación Española de Normalización in June of 2020.)
UNE-EN IEC 60384-11:2019 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil DC capacitors (Endorsed by Asociación Española de Normalización in November of 2019.)
UNE-EN 16761-1:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
UNE-EN IEC 60384-23:2023 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors (Endorsed by Asociación Española de Normalización in April of 2023.)
UNE-EN 12929-1:2015 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors (Endorsed by AENOR in August of 2015.)
UNE-EN 60384-23:2015 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors (Endorsed by AENOR in August of 2015.)
UNE-EN 12929-2:2015 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors (Endorsed by AENOR in August of 2015.)
UNE-EN 16761-2:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
UNE-EN IEC 60384-19:2022 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors (Endorsed by Asociación Española de Normalización in October of 2022.)
UNE-EN 60384-19:2015 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (Endorsed by AENOR in January of 2016.)

Shandong Provincial Standard of the People's Republic of China, Methanol separator

DB37/T 3352-2018 Guidelines for the Implementation of the Safety Production Risk Hierarchical Control System for Enterprises in the Methanol Industry

Professional Standard - Post and Telecommunication, Methanol separator

YD/T 1118.1-2001 Secondary coating materials used for optical fiber Part 1: Polybutylene terephtalate

Professional Standard - Commodity Inspection, Methanol separator

SN/T 1888.11-2007 Hygienic standard for export and import irradiated food containers and packaging materials.Part 11: Pdyethylene terephthalate resin
SN/T 1888.13-2007 Hygienic standard for export and import irradiated food containers and packaging materials.Part 13: Products of polyethylene terephthalate
SN/T 1891.9-2007 Hygienic standard for import and export microwave food containers and packaging materials.Part 9: Polyethylene terephthalate resin
SN/T 1891.12-2007 Hygienic standard for import and export microwave food containers and packaging materials.Part 12: Products of polyethylene terephthalate
SN/T 1880.2-2007 Hygienic specifications of export and import food packaging Part 2: Polyethylene terephthalate packaging

Professional Standard - Ferrous Metallurgy, Methanol separator

YB/T 5043-1993 Molybdenum Oxide Block Chemical Analysis Method n-Butanol-Chloroform Extraction Spectrophotometric Determination of Phosphorus

PL-PKN, Methanol separator

PN Z04207-04-1992 Air purity protection Tests for mercaptans Determination of methyl mercaptan n work places by gas chromatography with flame ionization detection

VN-TCVN, Methanol separator

TCVN 5465-9-2009 Textiles.Quantitative chemical analysis.Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol)

Professional Standard - Hygiene , Methanol separator

WS/T 28-1996 Urine.Determination of arsenic.Silver diethyldithiocarbamate-triethanolamine.Spectrophotometric method

Professional Standard - Aviation, Methanol separator

HB 5220.40-1995 Method for Chemical Analysis of Superalloys Methanol Distillation-Curcumin Absorption Spectrophotometry for Determination of Boron Content
HB 5220.40-2008 Methods for chemical analysis of superalloys. Part 40: Determination of boron content by methanol distillation-curcumin photometric method
HB 5220.8-1995 Chemical Analysis Methods of Superalloys-N-Butanol-Chloroform Extraction-Absorptiometry for Determination of Phosphorus Content
HB 5220.8-2008 Methods for chemical analysis of superalloys.Part 8: Determination of phosphorus content by n-butyl alcohol-chloroform extraction photometric method

Japanese Industrial Standards Committee (JISC), Methanol separator

JIS G 1216-2:2022 Iron and steel -- Determination of nickel -- Part 2: Disodium dihydrogen ethylenediamine tetraacetic acid back titration by zinc after precipitation separation of dimethylglyoximato complex

Professional Standard - Electron, Methanol separator

SJ/Z 9191-1995 Specifications for determination of metal foil bis2hydroxyethyl terephthalate film dielectric DC fixed capacitors used for VCR