ZH
RU
ES
Use of Infrared Instruments
Use of Infrared Instruments, Total:84 items.
In the international standard classification, Use of Infrared Instruments involves: Lubricants, industrial oils and related products, Milk and milk products, Thermodynamics and temperature measurements, Laboratory medicine, Physics. Chemistry, Optical equipment, Domestic, commercial and industrial heating appliances, Optics and optical measurements, Industrial furnaces, Medical equipment, Analytical chemistry, Fuels, Alarm and warning systems, On-board equipment and instruments, Paints and varnishes.
American Society for Testing and Materials (ASTM), Use of Infrared Instruments
- ASTM D7686-11 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
- ASTM E2758-15a(2021) Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
- ASTM E2758-15 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
- ASTM E2758-10 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
- ASTM D7686-23 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
- ASTM E1791-96(2021) Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
- ASTM E1791-96(2014) Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
- ASTM D7686-19 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
- ASTM E2758-22 Standard Guide for Selection and Use of Infrared Thermometers
- ASTM E2758-15a Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
- ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
- ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
- ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
- ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
- ASTM E2937-18 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
- ASTM D7418-12 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
- ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
- ASTM E2937-13 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
- ASTM D6277-07 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
- ASTM D6277-07(2012) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
- ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
Professional Standard - Petroleum, Use of Infrared Instruments
RU-GOST R, Use of Infrared Instruments
- GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
- GOST R 50777-2014 Passive infeared detectors for using at different condisions. General requirements and test methods
Military Standard of the People's Republic of China-General Armament Department, Use of Infrared Instruments
British Standards Institution (BSI), Use of Infrared Instruments
- BS EN 591:2001 Instructions for use for in vitro diagnostic instruments for professional use
- BS EN 592:2002 Instructions for use for in vitro diagnostic instruments for self-testing
- BS ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Optical instruments for outdoor conditions of use
- BS EN 60240-1:1994 Characteristics of electric infra-red emitters for industrial heating. Short wave infra-red emitters
- BS EN 12011:1998 Instrumentation to be used in association with non-active surgical implants - General requirements
BE-NBN, Use of Infrared Instruments
GOSTR, Use of Infrared Instruments
- GOST R EN 592-2010 Instructions for use for in vitro diagnostic instruments for self-testing
未注明发布机构, Use of Infrared Instruments
- DIN EN 591:2001 Instructions for use for in vitro diagnostic instruments for professional use
- BS EN 60240-1:1994(1999) Characteristics of electric infra - red emitters for industrial heating — Part 1 : Short wave infra - red emitters
Association Francaise de Normalisation, Use of Infrared Instruments
- NF S92-016:1995 IN VITRO DIAGNOSTIC SYSTEMS. REQUIRMENTS FOR USER MANUELS FOR IN VITRO DIAGNOSTIC INSTRUMENTS FOR PROFESSIONAL USE. (EUROPEAN STANDARD EN 591).
- NF EN 60240-1:1995 Caractéristiques des émetteurs électriques d'infrarouge pour chauffage industriel - Partie 1 : émetteurs d'infrarouge court.
- NF S92-017:1995 IN VITRO DIAGNOSTIC SYSTEMS. REQUIREMENTS FOR USER MANUALS FOR IN VITRO DIAGNOSTIC INSTRUMENTS FOR HOME USE. (EUROPEAN STANDARD EN 592).
- NF S77-106:1992 Personal eye-protection. Infrared fliters. Transmittance requirements and recommanded use.
- NF EN 60335-2-27/A2:2020 Appareils électrodomestiques et analogues - Sécurité - Partie 2-27 : règles particulières pour les appareils d'exposition de la peau aux rayonnements ultraviolets et infrarouges
- NF EN 60335-2-27:2013 Appareils électrodomestiques et analogues - Sécurité - Partie 2-27 : règles particulières pour les appareils d'exposition de la peau aux rayonnements ultraviolets et infrarouges
International Organization for Standardization (ISO), Use of Infrared Instruments
- ISO/TS 10867:2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use
- ISO 16061:2021 Instruments for use in association with non-active surgical implants - General requirements
SE-SIS, Use of Infrared Instruments
German Institute for Standardization, Use of Infrared Instruments
- DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
- DIN 10478:2003 Determination of ingredients of raw milk using infra-red spectrophotometry - Function test of the instruments
- DIN ISO 10109-11:2002 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use (ISO 10109-11:2001)
- DIN EN 60240-1:1995-07 Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters (IEC 60240-1:1992); German version EN 60240-1:1994
International Commission on Illumination (CIE), Use of Infrared Instruments
- CIE 245-2021 Optical Safety of Infrared Eye Trackers Applied for Extended Durations
International Electrotechnical Commission (IEC), Use of Infrared Instruments
- IEC 60240-1:1992 Characteristics of electric infra-red emitters for industrial heating; part 1: short wave infra-red emitters
Korean Agency for Technology and Standards (KATS), Use of Infrared Instruments
- KS C IEC 60240-1:2005 Characteristics of electric infra-red emitters for industrial heating－Part 1：Short wave infra-red emitters
- KS B ISO 10109-11-2006(2016) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
- KS B ISO 10109-11-2006(2021) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
- KS P ISO 16061:2008 Instrumentation for use in association with non-active surgical implants-General requirements
- KS P ISO 16061:2014 Instrumentation for use in association with non-active surgical implants — General requirements
- KS B ISO 10109-11:2006 Optics and optical instruments－Environmental requirements－Part 11：Optical instruments for outdoor conditions of use
- KS P ISO 16061:2020 Instrumentation for use in association with non-active surgical implants — General requirements
ES-UNE, Use of Infrared Instruments
- UNE-EN 60240-1:1994 CHARACTERISTICS OF ELECTRIC INFRA-RED EMITTERS FOR INDUSTRIAL HEATING. PART 1: SHORT WAVE INFRA-RED EMITTERS. (Endorsed by AENOR in April of 1996.)
国家市场监督管理总局、中国国家标准化管理委员会, Use of Infrared Instruments
- GB/T 18497.1-2019 Characteristics of electric infrared emitters for industrial heating—Part 1: Shortwave electric infrared emitters
- GB/T 18497.2-2019 Characteristics of electric infrared emitters for industrial heating—Part 2: Mediumwave and longwave electric infrared emitters
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Use of Infrared Instruments
- GB/T 18497.1-2001 Characteristics of electric infra-red emitters for industrial heating Part 1: Short wave infra-red emitters
TR-TSE, Use of Infrared Instruments
- TS 2784-1977 Characteristics Of Elektnc Infra - Red Emitters For Heating Purposes
KR-KS, Use of Infrared Instruments
- KS B ISO 10109-11-2023 Optics and optical instruments — Environmental requirements — Part 11: Optical instruments for outdoor conditions of use
- KS P ISO 16061-2020 Instrumentation for use in association with non-active surgical implants — General requirements
PT-IPQ, Use of Infrared Instruments
- NP EN 12011-2000 Instrumentation to be used in association with non-active surgical implants General requirements
Danish Standards Foundation, Use of Infrared Instruments
- DS/EN ISO 16061:2009 Instrumentation for use in association with non-active surgical implants - General requirements
- DS/EN 171:1993 Personal eye-protection. Infrared filters. Transmittance requirements and recommended use
Professional Standard - Electron, Use of Infrared Instruments
Institute of Electrical and Electronics Engineers (IEEE), Use of Infrared Instruments
- IEEE Std 1871.1-2014 IEEE Recommended Practice for Using IEEE 1671.2(TM) Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments such as Waveform Generators, Digitizers, External Oscillators, and Up and Down Converters
- IEEE P1871.1/D4, April 2014 IEEE Draft Recommended Practice for Using IEEE 1671.2 Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments Such as Waveform Generators, Digitizers, External Oscillators, and Up & Down Converters
- IEEE P1871.1/D5, August 2014 IEEE Approved Draft Recommended Practice for Using IEEE 1671.2 Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments Such as Waveform Generators, Digitizers, External Oscillators, and Up & Down Converters
Society of Automotive Engineers (SAE), Use of Infrared Instruments
- SAE ARP582D-2012 Lighting, Integral, for Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments
European Committee for Electrotechnical Standardization（CENELEC）, Use of Infrared Instruments
- EN 60240-1:1994 Characteristics of Electric Infra-Red Emitters for Industrial Heating Part 1: Short Wave Infra-Red Emitters
Standard Association of Australia （SAA）, Use of Infrared Instruments
- AS 2162.2:1998 Verification and use of volumetric apparatus - Guide to the use of piston-operated volumetric apparatus (POVA)
Professional Standard - Energy, Use of Infrared Instruments
- NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)
国家能源局, Use of Infrared Instruments
- SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)
Lithuanian Standards Office , Use of Infrared Instruments
- LST EN 60240-1-2001 Characteristics of electric infra-red emitters for industrial heating. Part 1: Short wave infra-red emitters (IEC 60240-1:1992)
European Committee for Standardization (CEN), Use of Infrared Instruments
- prEN 591-1991 In-vitro diagnostic systems; requirements for user manual of in-vitro diagnostic instruments for professional use
IN-BIS, Use of Infrared Instruments