ZH
RU
ES
Nondestructive Testing Ultrasound
Nondestructive Testing Ultrasound, Total:499 items.
In the international standard classification, Nondestructive Testing Ultrasound involves: Non-destructive testing, Vocabularies, Testing of metals, Metrology and measurement in general, Welding, brazing and soldering.
国家市场监督管理总局、中国国家标准化管理委员会, Nondestructive Testing Ultrasound
- GB/T 11344-2021 Non-destructive testing—Ultrasonic thickness measurement
- GB/T 39240-2020 Non-destructive testing—Ultrasonic testing—General principles
- GB/T 39241-2020 Non-destructive testing—Ultrasonic testing—Transmission technique
- GB/T 39432-2020 Non-destructive testing—Ultrasonic testing—Specification for step wedge calibration block
- GB/T 39242-2020 Non-destructive testing—Ultrasonic testing—Sensitivity and range setting
- GB/T 39239-2020 Non-destructive testing—Ultrasonic testing—Characterization and sizing of discontinuities
- GB/T 41114-2021 Non-destructive testing—Ultrasonic testing—Specification for a calibration block for phased array testing(PAUT)
- GB/T 39238-2020 Non-destructive testing—Ultrasonic testing—Examination for discontinuities perpendicular to the surface
- GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
- GB/T 41115-2021 Non-destructive testing of welds—Ultrasonic testing—Use of time-of-flight diffraction technique (TOFD)
- GB/T 23902-2021 Non-destructive testing—Ultrasonic testing—Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
- GB/T 40733-2021 Non-destructive testing of welds—Ultrasonic testing—Use of automated phased array technology
- GB/T 40732-2021 Non-destructive testing of welds—Ultrasonic testing—Testing of welds in austenitic steels and nickel-based alloys
- GB/T 18852-2020 Non-destructive testing—Ultrasonic testing—Reference blocks and test procedures for the characterization of contact probe sound beams
SE-SIS, Nondestructive Testing Ultrasound
Danish Standards Foundation, Nondestructive Testing Ultrasound
- DS/EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
- DS 2333:1987 Non-destructive testing. Ultrasonic testing. Terminology
- DS/EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
- DS/EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
- DS/EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
- DS/EN 583-3:1998 Non destructive testing - Ultrasonic examination - Part 3: Transmission technique
- DS/EN ISO 23243:2020 Non-destructive testing – Ultrasonic testing with arrays – Vocabulary (ISO 23243:2020)
- DS/EN 583-1/A1:2004 Non-destructive testing - Ultrasonic examination - Part 1: General principles
- DS/EN 583-1:1999 Non-destructive testing - Ultrasonic examination - Part 1: General principles
- DS/EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
- DS/EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- DS/EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
- DS/EN 583-2:2001 Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting
- DS/EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
- DS/EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
- DS/EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
- DS/EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
- DS/ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment
- DS/EN 583-4/A1:2004 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
- DS/EN 583-4:2002 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
- DS/EN 12668-3/A1:2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
- DS/EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
- DS/EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- DS/EN 583-5/A1:2004 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities
- DS/EN 583-5:2001 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities
- DS/EN ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment (ISO 22232-3:2020)
- DS/ISO 23864:2021 Non‐destructive testing of welds – Ultrasonic testing – Use of automated total focusing technique (TFM) and related technologies
- DS/ISO 23865:2021 Non-destructive testing – Ultrasonic testing – General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
Lithuanian Standards Office , Nondestructive Testing Ultrasound
- LST EN 14127-2011 Non-destructive testing - Ultrasonic thickness measurement
- LST EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
- LST EN 583-3-2000 Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique
- LST EN 583-1-2000 Non-destructive testing - Ultrasonic examination - Part 1: General principles
- LST EN 583-1-2000/A1-2004 Non-destructive testing - Ultrasonic examination - Part 1: General principles
- LST EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
- LST EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
- LST EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
- LST EN 15317-2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- LST EN 583-2-2003 Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting
- LST EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012)
- LST EN 12668-1-2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
- LST EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds (ISO 23279:2010)
- LST EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
- LST EN 12668-2-2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
- LST EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)
- LST EN 12668-3-2014 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
- LST EN 583-4-2003 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
- LST EN 583-4-2003/A1-2004 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
- LST EN 12668-3-2001 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
- LST EN 12668-3-2001/A1-2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
- LST EN 583-5-2003 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities
- LST EN 583-5-2003/A1-2004 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities
- LST EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011)
- LST EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
- LST EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
- LST EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
- LST EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
- LST EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012)
AENOR, Nondestructive Testing Ultrasound
- UNE-EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
- UNE-EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017)
- UNE-EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
- UNE-EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
- UNE-EN ISO 7963:2011 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
- UNE-EN ISO 2400:2013 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
- UNE-EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
- UNE-EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012)
- UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- UNE-EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017)
- UNE-EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds (ISO 23279:2010)
- UNE-EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
- UNE-EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012)
- UNE-EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
- UNE-EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
- UNE-EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012)
- UNE-EN ISO 13588:2013 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)
- UNE-EN 16392-2:2014 Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2: Probes
- UNE-EN 12668-3:2014 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
- UNE-EN ISO 10863:2012 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011)
- UNE-EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
- UNE-EN ISO 17405:2015 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014)
Standard Association of Australia (SAA), Nondestructive Testing Ultrasound
German Institute for Standardization, Nondestructive Testing Ultrasound
- DIN EN ISO 16809:2020-02 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017); German version EN ISO 16809:2019
- DIN EN ISO 5577:2017-05 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017); German version EN ISO 5577:2017
- DIN EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version EN ISO 16810:2014
- DIN EN ISO 16810:2014-07 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version EN ISO 16810:2014
- DIN EN ISO 16823:2014-07 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
- DIN EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
- DIN EN ISO 11666:2018-05 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018); German version EN ISO 11666:2018
- DIN EN ISO 2400:2013-01 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012); German version EN ISO 2400:2012
- DIN EN ISO 7963:2023-02 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022); German version EN ISO 7963:2022
- DIN EN 583-1:1998 Non-destructive testing - Ultrasonic examination - Part 1: General principles; German version EN 583-1:1998
- DIN EN ISO 16811:2014-06 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012); German version EN ISO 16811:2014
- DIN EN 583-3:1997 Non-destructive testing - Ultrasonic testing - Part 3: Transmission technique; German version EN 583-3:1997
- DIN EN ISO 16946:2017-07 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017); German version EN ISO 16946:2017
- DIN EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
- DIN EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
- DIN EN ISO 13588:2019-07 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019); German version EN ISO 13588:2019
- DIN EN 15317:2014-02 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
- DIN EN ISO 16826:2014-06 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012); German version EN ISO 16826:2014
- DIN EN ISO 16827:2014-06 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012); German version EN ISO 16827:2014
- DIN EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017); German version EN ISO 5577:2017
- DIN EN ISO 10863:2020-09 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020); German version EN ISO 10863:2020
- DIN EN ISO 23279:2017-12 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017); German version EN ISO 23279:2017
- DIN EN ISO 16946:2023-08 Non-destructive testing - Ultrasonic testing - Specification for a step wedge calibration block (ISO/DIS 16946:2023); German and English version prEN ISO 16946:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 16946 (2017-07).
- DIN EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
- DIN EN ISO 17640:2019-02 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018); German version EN ISO 17640:2018
- DIN EN ISO 22232-1:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020); German version EN ISO 22232-1:2020
- DIN EN ISO 22232-2:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020); German version EN ISO 22232-2:2020
- DIN EN ISO 22825:2018-02 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017); German version EN ISO 22825:2017
- DIN EN ISO 13588:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
- DIN EN ISO 17405:2022-08 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022); German version EN ISO 17405:2022
- DIN EN ISO 22232-3:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020); German version EN ISO 22232-3:2020
- DIN EN ISO 18563-1:2022-12 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022); German version EN ISO 18563-1:2022
- DIN EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
- DIN EN ISO 20601:2019-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018); German version EN ISO 20601:2018
- DIN EN ISO 22825:2018 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
- DIN EN ISO 22825:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2006); English version of DIN EN ISO 22825:2006-10
- DIN EN ISO 18563-3:2016-06 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Combined systems (ISO 18563-3:2015); German version EN ISO 18563-3:2015
- DIN EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006); German version EN ISO 7963:2010
- DIN EN ISO 2400:2013 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012); German version EN ISO 2400:2012
- DIN EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012); German version EN ISO 16811:2014
- DIN EN ISO 22232-2:2018 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO/DIS 22232-2:2018); German and English version prEN ISO 22232-2:2018
- DIN EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017); German version EN ISO 16946:2017
- DIN EN ISO 22232-1:2018 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments (ISO/DIS 22232-1:2018); German and English version prEN ISO 22232-1:2018
- DIN EN ISO 18563-2:2017 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017)
- DIN EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
- DIN EN ISO 23864:2022-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021); German version EN ISO 23864:2021
- DIN EN 17290:2018 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique; German and English version prEN 17290:2018
- DIN EN 17290:2021-12 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique; German version EN 17290:2021
- DIN EN ISO 18563-2:2017-12 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017); German version EN ISO 18563-2:2017
- DIN EN ISO 18563-1:2022 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022)
- DIN EN ISO 22232-3:2018 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO/DIS 22232-3:2018); German and English version prEN ISO 22232-3:2018
- DIN EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012); German version EN ISO 16827:2014
- DIN EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
- DIN EN ISO 18563-3:2016 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Combined systems (ISO 18563-3:2015)
- DIN EN ISO 20601:2017 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for steel components with small wall thickness (ISO/DIS 20601:2017); German and English version prEN ISO 20601:2017
- DIN EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012); German version EN ISO 16826:2014
- DIN EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010); German version EN ISO 17640:2010
Association Francaise de Normalisation, Nondestructive Testing Ultrasound
- NF EN ISO 16809:2019 Essais non destructifs - Mesurage de l'épaisseur par ultrasons
- NF A09-017*NF EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
- NF EN ISO 5577:2017 Essais non destructifs - Contrôle par ultrasons - Vocabulaire
- NF A09-332*NF EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
- NF A09-334*NF EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
- NF EN ISO 16823:2014 Essais non destructifs - Contrôle par ultrasons - Technique par transmission
- NF EN ISO 16810:2014 Essais non destructifs - Contrôle par ultrasons - Principes généraux
- NF EN ISO 2400:2012 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 1
- NF A89-521*NF EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
- NF EN ISO 7963:2022 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 2
- NF A09-333*NF EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
- NF EN ISO 16946:2017 Essais non destructifs - Essais par ultrasons - Spécifications relatives aux blocs d'étalonnage à gradins
- NF A09-322:1985 Non destructive testing - Ultrasonic testing - Specifications of ultrasonic probes for industrial use
- NF A09-312*NF EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- NF EN ISO 11666:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Niveaux d'acceptation
- NF EN ISO 16811:2014 Essais non destructifs - Contrôle par ultrasons - Réglage de la sensibilité et de la base de temps
- NF A09-336*NF EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
- NF ISO 19675:2017 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage pour la technique multi-éléments
- NF A09-018*NF ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
- NF A09-323:1987 Non-destructive testing - Ultrasonic testing - Methods for specifying ultrasonic probes for industrial use
- NF A89-520*NF EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
- NF EN ISO 16827:2014 Essais non destructifs - Contrôle par ultrasons - Caractérisation et dimensionnement des discontinuités
- NF A89-522*NF EN ISO 23279:2017 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds
- NF EN ISO 16826:2014 Essais non destructifs - Contrôle par ultrasons - Contrôle des discontinuités perpendiculaires à la surface
- NF A09-341:1991 Non-destructive testing - Ultrasonic testing - Monitoring of equipment - Setting using control cards
- NF EN 15317:2013 Essais non destructifs - Contrôle ultrasonore - Caractérisation et vérification des appareils de mesure de l'épaisseur par ultrasons
- NF EN ISO 17640:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Techniques, niveaux d'essai et évaluation
- NF A09-324:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment.
- NF A09-320-1:2010 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.
- NF A09-320-1*NF EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1 : instruments
- NF A89-524*NF EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
- NF EN ISO 22232-1:2020 Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons - Partie 1 : appareils
- NF EN ISO 13588:2019 Essais non destructif des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique multi-éléments automatisés
- NF EN ISO 22232-2:2020 Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons - Partie 2 : traducteurs
- NF A89-523:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys.
- NF A09-022-2:2014 Non destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2 : probes
- NF EN ISO 17405:2022 Essais non destructifs - Contrôle par ultrasons - Technique d'essai des placages produits par soudage, laminage et explosion
- NF A89-512:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
- NF A09-320-3:2013 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: combined equipment
- NF A09-320-3:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3 : combined equipment
- NF EN ISO 23279:2017 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Caractérisation des discontinuités dans les assemblages soudés
- NF EN ISO 10863:2020 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique de diffraction des temps de vol (TOFD)
- NF EN ISO 22232-3:2020 Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons - Partie 3 : équipement complet
- NF A09-022-1*NF EN ISO 18563-1:2015 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1 : instruments
- NF A89-523:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys.
- NF A89-523*NF EN ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- NF A09-022-3*NF EN ISO 18563-3:2016 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3 : combined system
- NF A09-337*NF EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
- NF A89-517*NF EN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies
- NF A09-327*NF EN ISO 17405:2014 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion
- NF EN ISO 22825:2017 Essais non destructif des assemblages soudés - Contrôle par ultrasons - Contrôle des soudures en aciers austénitiques et en alliages à base nickel
- NF A89-514*NF EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components
- NF A09-313*NF EN 17290:2021 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
- NF EN 17290:2021 Essais non destructifs - Contrôle par ultrasons - Examen de la perte d'épaisseur due à l'érosion et/ou à la corrosion par la technique TOFD
- NF EN ISO 20601:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique multi-éléments automatisés pour les composants en acier à paroi mince
- NF EN ISO 16828:2014 Essais non destructifs - Contrôle par ultrasons - Technique de diffraction du temps de vol utilisée comme méthode de détection et de dimensionnement des discontinuités
- NF A09-024:2021 Non-destructive testing - Ultrasonic testing - General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
- NF ISO 23865:2021 Essais non destructifs - Contrôle par ultrasons - Utilisation générale de l'acquisition de la matrice intégrale/technique de focalisation en tous points (FMC/FTP) et de techniques associées
International Organization for Standardization (ISO), Nondestructive Testing Ultrasound
- ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
- ISO 16810:2012 Non-destructive testing - Ultrasonic testing - General principles
- ISO/CD 5577:2023 Non-destructive testing — Ultrasonic testing — Vocabulary
- ISO 16809:2012 Non-destructive testing - Ultrasonic thickness measurement
- ISO 16809:2017 Non-destructive testing - Ultrasonic thickness measurement
- ISO/CD 16810:2023 Non-destructive testing — Ultrasonic testing — General principles
- ISO/CD 16823:2011 Non-destructive testing — Ultrasonic testing — Through-transmission technique
- ISO 16823:2012 Non-destructive testing - Ultrasonic testing - Transmission technique
- ISO 5577:2000 Non-destructive testing - Ultrasonic inspection - Vocabulary
- ISO 7963:2006 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
- ISO 16811:2012 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
- ISO 7963:2022 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
- ISO/CD 16811:2011 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
- ISO 11666:2010 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
- ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
- ISO/CD 16946 Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block
- ISO/DIS 16946:2023 Non-destructive testing — Ultrasonic testing — Specification for a step wedge calibration block
- ISO 16946:2015 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
- ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
- ISO 23279:2017 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
- ISO/CD 16831:2023 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
- ISO 16831:2012 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- ISO/CD 16826:2011 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
- ISO/CD 16827:2023 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
- ISO 22232-2:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes
- ISO 22232-1:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments
- ISO 16826:2012 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface
- ISO 16827:2012 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
- ISO 22232-3:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 3: Combined equipment
- ISO 22825:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- ISO 18563-1:2022 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments
- ISO/CD 18563-2:2023 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Probes
- ISO 17405:2022 Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
- ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
- ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies
- ISO/DIS 18563-3 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Complete systems
- ISO/DIS 18563-2:2011 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Array probes
- ISO 20601:2018 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
- ISO 16828:2012 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
- ISO 23865:2021 Non-destructive testing -- Ultrasonic testing -- General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
ZA-SANS, Nondestructive Testing Ultrasound
- SANS 393:2004 Non-destructive testing - Ultrasonic inspection - Vocabulary
- SANS 396:2004 Non-destructive testing - Ultrasonic inspection - Characterization of search unit and sound field
- SANS 12710:2003 Non-destructive testing - Ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments
- SANS 12715:2004 Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles
Korean Agency for Technology and Standards (KATS), Nondestructive Testing Ultrasound
- KS B ISO 5577-2016(2021) Non-destructive testing-Ultrasonic inspection-Vocabulary
- KS B ISO 16810:2019 Non-destructive testing ― Ultrasonic testing ― General principles
- KS B ISO 5577:2022 Non-destructive testing — Ultrasonic testing — Vocabulary
- KS B ISO 16823:2022 Non-destructive testing — Ultrasonic testing —Transmission technique
- KS B ISO 11666:2019 Non-destructive testing of welds ― Ultrasonic testing ― Acceptance levels
- KS B ISO 23279-2007(2012) Non-destructive testing of welds-Ultrasonic testing-Characterization of indications in welds
- KS B ISO 2400:2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
- KS B ISO 10375:2008 Non-destructive testing-Ultrasonic inspection-Characterization of search unit and sound field
- KS B ISO 10375:2018 Non-destructive testing — Ultrasonic inspection — Characterization of search unit and sound field
- KS B ISO 16827:2022 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
- KS B ISO 17640:2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
- KS B ISO 23279-A:2019 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
- KS B ISO 12710:2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
- KS B ISO 16826:2022 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
- KS B ISO 22825-2006(2011) Non-destructive testing of welds-Ultrasonic testing-Testing of welds in austenitic steels and nickel-based alloys
- KS B ISO 22825:2006 Non-destructive testing of welds-Ultrasonic testing-Testing of welds in austenitic steels and nickel-based alloys
- KS B ISO 22825:2013 Non-destructive testing of welds-Ultrasonic testing-Testing of welds in austenitic steels and nickel-based alloys
- KS B ISO 20601:2021 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
- KS B ISO 18563-3:2022 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Combined systems
- KS B ISO 18563-3:2017 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Combined systems
- KS B ISO 16828:2014 Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
KR-KS, Nondestructive Testing Ultrasound
- KS B ISO 5577-2016 Non-destructive testing-Ultrasonic inspection-Vocabulary
- KS B ISO 16810-2019 Non-destructive testing ― Ultrasonic testing ― General principles
- KS B ISO 5577-2022 Non-destructive testing — Ultrasonic testing — Vocabulary
- KS B ISO 16823-2022 Non-destructive testing — Ultrasonic testing —Transmission technique
- KS B ISO 11666-2019 Non-destructive testing of welds ― Ultrasonic testing ― Acceptance levels
- KS B ISO 2400-2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
- KS B ISO 10375-2018 Non-destructive testing — Ultrasonic inspection — Characterization of search unit and sound field
- KS B ISO 16827-2022 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
- KS B ISO 17640-2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
- KS B ISO 23279-A-2019 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
- KS B ISO 12710-2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
- KS B ISO 16826-2022 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
- KS B ISO 22825-2023 Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
- KS B ISO 20601-2021 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
- KS B ISO 18563-3-2022 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Combined systems
BR-ABNT, Nondestructive Testing Ultrasound
European Committee for Standardization (CEN), Nondestructive Testing Ultrasound
- prEN ISO 5577 Non-destructive testing — Ultrasonic testing — Vocabulary
- EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
- prEN ISO 16810 rev Non-destructive testing — Ultrasonic testing — General principles
- prEN ISO 16823 rev Non-destructive testing — Ultrasonic testing — Transmission technique
- EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
- EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
- EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
- EN ISO 7963:2022 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
- EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
- EN ISO 16946:2015 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2015)
- prEN ISO 16811 rev Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
- EN 583-3:1997 Non-Destructive Testing - Ultrasonic Examination - Part 3: Transmission Technique
- prEN ISO 16946 rev Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
- EN ISO 11666:2010 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
- EN ISO 17640:2017 Non-destructive testing of welds - Ultrasonic testing - Techniques@ testing levels@ and assessment
- EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
- EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) [Superseded: CEN CEN/TS 14751]
- EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
- EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- prEN ISO 16831 rev Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
- prEN ISO 16826 rev Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
- prEN ISO 16827 rev Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
- EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
- EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
- EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012)
- EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
- EN ISO 18563-1:2022 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022)
- EN 583-2:2001 Non-Destructive Testing - Ultrasonic Examination - Part 2: Sensitivity and Range Setting
- EN ISO 22232-3:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
- EN ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- EN 16392-2:2014 Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2: Probes
- prEN ISO 18563-2 rev Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes
- EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
- EN ISO 17640:2010 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
- EN 583-1:1998 Non-destructive testing Ultrasonic examination Part 1: General principles Includes amendment A1:2003
- EN 12668-3:2013 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
- EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
- EN ISO 17405:2022 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022)
- EN ISO 23864:2021 Non‐destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
- EN ISO 18563-1:2015 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2015)
- EN ISO 17405:2014 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding@ rolling and explosion
- prEN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
- EN 17290:2021 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
- prEN ISO 17405:2021 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO/DIS 17405:2021)
- EN ISO 18563-3:2015 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Combined systems (ISO 18563-3:2015)
- prEN ISO 18563-1:2021 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO/DIS 18563-1:2021)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Nondestructive Testing Ultrasound
- GB/T 23905-2009 Non-destructive testing.Blocks for ultrasonic testing
- GB/T 31211-2014 Non-destructive testing.Ultrasonic guided wave testing.General principle
- GB/T 23904-2009 Non-destructive testing.Test method for ultrasonic testing by surface wave
- GB/T 19799.2-2012/ISO 7963:2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
- GB/T 19799.2-2012/ISO 7963-2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
- GB/T 19799.2-2005 Non-destructive testing.Ultrasonic testing.Calibration block No.2
- GB/T 19799.1-2005 Non-destructive testing-Ultrasonic testing-Calibration block No.1
- GB/T 29712-2013 Non-destructive testing of welds.Ultrasonic testing.Acceptance levels
- GB/T 19799.2-2012 Non-destructive testing.Ultrasonic testing.Specification for calibration block No.2
- GB/T 19799.1-2015 Non-destructive testing.Ultrasonic testing.Specification for calibration block No. 1
- GB/T 32563-2016 Non-destructive testing.Ultrasonic testing.Test method for phased-array ultrasonic testing
- GB/T 27669-2011 Non-destructive testing.Ultrasonic inspection.Evaluating electronic characteristics of ultrasonic test instruments
- GB/T 18694-2002 Non-destructivetesting--Ultrasonic inspection--Characterization of search unit and sound field
- GB/T 29711-2013 Non-destructive testing of welds.Ultrasonic testing.Characterization of indications in welds
- GB/T 11345-2013 Non-destructive testing of welds.Ultrasonic testing.Techniques, testing levels, and assessment
- GB/T 23902-2009 Non-destructive testing.Ultrasonic examination.Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
- GB/T 11259-2008 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
- GB/T 27664.1-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 1:Instruments
- GB/T 27664.2-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 2:Probes
- GB/T 11259-2015 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
- GB/T 41655-2022 Non-destructive testing—Ultrasonic testing—Technique of testing claddings produced by welding, rolling and explosion
- GB/T 27664.3-2012 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 3:Combined equipment
- GB/T 18852-2002 Ultrasonic non-destructive testing--Reference blocks and test procedures for the characterization of contact search unit beam profiles
Professional Standard - Machinery, Nondestructive Testing Ultrasound
- JB/T 8428-2006 Non-destructive testing Blocks for ultrasonic testing
- JB/T 10814-2007 Non-destructive testing.Ultrasonic testing by surface wave
- JB/T 12466-2015 Non-destructive testing.Specification for ultrasonic probes
- JB/T 8428-2015 General specification for non-destructive testing ultrasonic test block
- JB/T 11731-2013 Non-destructive testing.General specification for ultrasonic phased array probe
Professional Standard - Civil Aviation, Nondestructive Testing Ultrasound
中国民用航空局, Nondestructive Testing Ultrasound
British Standards Institution (BSI), Nondestructive Testing Ultrasound
- BS EN 14127:2011 Non-destructive testing. Ultrasonic thickness measurement
- BS EN ISO 16810:2014 Non-destructive testing. Ultrasonic testing. General principles
- BS EN ISO 16823:2014 Non-destructive testing. Ultrasonic testing. Transmission technique
- BS EN ISO 11666:2011 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
- BS EN ISO 11666:2010 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
- BS EN ISO 2400:2012 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1
- BS EN ISO 16811:2014 Non-destructive testing. Ultrasonic testing. Sensitivity and range setting
- BS EN ISO 16827:2014 Non-destructive testing. Ultrasonic testing. Characterization and sizing of discontinuities
- BS EN ISO 18563-2:2017 Non-destructive testing. Characterization and verification of ultrasonic phased array equipment. Probes
- BS EN 16392-2:2014 Non-destructive testing. Characterisation and verification of ultrasonic phased array equipment. Probes
- BS EN ISO 11666:2018 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
- 22/30437356 DC BS EN ISO 7963. Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
- BS EN ISO 17640:2017 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
- BS EN ISO 17640:2010 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
- BS EN 15317:2013 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
- BS EN ISO 16826:2014 Non-destructive testing. Ultrasonic testing. Examination for discontinuities perpendicular to the surface
- BS EN 12668-3:2013 Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment
- BS EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
- BS EN ISO 10863:2020 Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
- BS EN ISO 22825:2012 Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
- BS EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- BS EN ISO 17640:2018 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
- 18/30373433 DC BS ENISO 10863. Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
- BS EN ISO 23279:2017 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Characterization of discontinuities in welds
- BS EN ISO 13588:2019 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology
- BS EN ISO 16828:2014 Non-destructive testing. Ultrasonic testing. Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
- BS ISO 23864:2021 Non-destructive testing of welds. Ultrasonic testing. Use of automated total focusing technique (TFM) and related technologies
- BS EN ISO 23864:2021 Non-destructive testing of welds. Ultrasonic testing. Use of automated total focusing technique (TFM) and related technologies
- BS EN ISO 17405:2014 Non-destructive testing. Ultrasonic testing. Technique of testing claddings produced by welding, rolling and explosion
- 20/30393141 DC BS ISO 23865. Non-destructive testing. Ultrasonic testing. General use of full matrix capture / total focusing technique (FMC/TFM)
- BS EN 17290:2021 Non-destructive testing. Ultrasonic testing. Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
- 21/30438200 DC BS EN ISO 17405. Non-destructive testing. Ultrasonic testing. Technique of testing claddings produced by welding, rolling and explosion
- BS ISO 23865:2021 Non-destructive testing. Ultrasonic testing. General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
- BS EN ISO 20601:2018 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology for thin-walled steel components
- 12/30246414 DC BS ISO 12715. Non-destructive testing. Ultrasonic testing. Reference blocks and test procedures for the characterization of contact probe sound beams
- BS EN ISO 22825:2017 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
- 20/30392796 DC BS ISO 23864. Non-destructive testing of welds. Ultrasonic testing. Use of (semi-) automated full matrix capture / total focusing technique (FMC/TFM)
CEN - European Committee for Standardization, Nondestructive Testing Ultrasound
- EN ISO 16809:2019 Non-destructive testing - Ultrasonic thickness measurement
- EN ISO 13588:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
- EN ISO 22825:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- EN 12668-3:2000 Non-Destructive Testing - Characterization and Verification of Ultrasonic Examination Equipment - Part 3: Combined Equipment
- EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- EN 583-5:2000 Non-Destructive Testing - Ultrasonic Examination - Part 5: Characterization and Sizing of Discontinuities
- EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components
- PREN 17290-2018 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
ES-UNE, Nondestructive Testing Ultrasound
- UNE-EN ISO 16809:2020 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
- UNE-EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
- UNE-EN ISO 23279:2018 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017)
- UNE-EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
- UNE-EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
- UNE-EN ISO 13588:2020 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
- UNE-EN ISO 10863:2021 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
- UNE-EN ISO 22232-2:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
- UNE-EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
- UNE-EN ISO 17405:2022 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022)
- UNE-EN ISO 22232-3:2022 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
- UNE-EN ISO 18563-2:2018 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017)
- UNE-EN ISO 18563-1:2016 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2015)
- UNE-EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
- UNE-EN ISO 23864:2022 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
- UNE-EN ISO 22825:2018 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
- UNE-EN ISO 18563-3:2016 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Combined systems (ISO 18563-3:2015)
- UNE-EN 17290:2022 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Nondestructive Testing Ultrasound
- GB/T 34018-2017 Non-destructive testing—Test method for scanning ultrasonic microscopy
- GB/T 34638-2017 Non-destructive testing—Test methods for ultrasonic leak detection
FI-SFS, Nondestructive Testing Ultrasound
NO-SN, Nondestructive Testing Ultrasound
- NS 10210-1982 Non-destructive testing - Ultrasonic testing - Calibration block 1
IT-UNI, Nondestructive Testing Ultrasound
- UNI EN ISO 23243:2021 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary
- UNI EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments
- UNI EN ISO 22232-2:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes
- UNI EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment
Indonesia Standards, Nondestructive Testing Ultrasound
RU-GOST R, Nondestructive Testing Ultrasound
- GOST R 55808-2013 Nondestructive testing. Ultrasonic transducers. Test methods
- GOST 26266-1990 Non-destructive testing. Ultrasonic transducers. General technical requirements
- GOST 28702-1990 Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
- GOST R 55614-2013 Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
- GOST R 53205-2008 Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements
- GOST R 55809-2013 Non-destructive testing. Ultrasonic flaw detectors. Methods of measuring the main parameters
- GOST 28369-1989 Nondestructive testing. Ultra-violet sources. General technical requirements and test methods
VN-TCVN, Nondestructive Testing Ultrasound
- TCVN 1548-1987 Non.destructive testing for welded joints.Ultrasonic methods
- TCVN 5115-2009 Non-destructive testing.Ultrasonic testing.Specification for calibration block No.2
Japanese Industrial Standards Committee (JISC), Nondestructive Testing Ultrasound
- JIS Z 2355-1:2016 Non-destructive testing -- Ultrasonic thickness measurement -- Part 1: Measurement method
- JIS Z 2355-2:2016 Non-destructive testing -- Ultrasonic thickness measurement -- Part 2: Method for evaluating performance characteristics of ultrasonic thickness measuring equipment
未注明发布机构, Nondestructive Testing Ultrasound
- BS EN 583-1:1999(2008) Non - destructive testing — Ultrasonic examination — Part 1 : General principles
- BS EN 583-2:2001(2007) Non - destructive testing — Ultrasonic examination — Part 2 : Sensitivity and range setting
- DIN EN 12668-2-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 2: Probes
- DIN EN 12668-1-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 1: Testing equipment
- BS EN 583-4:2002(2007) Non - destructive testing — Ultrasonic examination — Part 4 : Examination for discontinuities perpendicular to the surface
- BS EN 583-5:2001(2008) Non - destructive testing — Ultrasonic examination — Part 5 : Characterization and sizing of discontinuities
- BS EN ISO 22232-3:2020 Non - destructive testing — Characterization and verification of ultrasonic test equipment Part 3 : Combined equipment
- BS EN ISO 23864:2021(2022) Non - destructive testing of welds — Ultrasonic testing — Use of automated total focusing technique (TFM) and related technologies
- DIN EN 583-5:2001 Non-destructive testing – Ultrasonic testing – Part 5: Description and sizing of inhomogeneities; German version EN 583-5:2000
- DIN EN ISO 23864:2022 Non-destructive testing of welded joints – Ultrasonic testing – Use of the automated total focusing method (TFM) and related technologies (ISO 23864:2021)
- DIN EN 583-4:2002 Non-destructive testing – Ultrasonic testing – Part 4: Testing for inhomogeneity perpendicular to the surface; German version EN 583-4:2002
YU-JUS, Nondestructive Testing Ultrasound
- JUS C.A7.051-1997 Non-destruclive testing - Control ofproperties of ultrasonic test systems - Simple controls
工业和信息化部, Nondestructive Testing Ultrasound
- JB/T 13463-2018 Preparation and inspection methods of oblique incidence test blocks for non-destructive testing and ultrasonic testing
PL-PKN, Nondestructive Testing Ultrasound
- PN-EN ISO 17640-2019-01 P Non-destructive testing of welds -- Ultrasonic testing -- Techniques, testing levels, and assessment (ISO 17640:2018)
- PN-EN ISO 10863-2020-12 E Non-destructive testing of welds -- Ultrasonic testing -- Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
- PN-EN ISO 22232-2-2021-03 E Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 2: Probes (ISO 22232-2:2020)
- PN-EN ISO 22232-1-2021-02 E Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 1: Instruments (ISO 22232-1:2020)
- PN-EN ISO 22232-3-2021-03 E Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 3: Combined equipment (ISO 22232-3:2020)
Group Standards of the People's Republic of China, Nondestructive Testing Ultrasound
- T/CSTM 00697-2023 Non-destructive testing – Ultrasonic testing –Ultrasonic testing method for weld overlay of wellhead and tree products
- T/CSTM 00214-2020 Non-destructive testing – Ultrasonic testing –Fabrication and testing method of oblique incident test block with convex surface
- T/CSTM 00701-2023 Non-destructive testing – Ultrasonic testing –Fabrication and testing method of oblique incident test block with concave surface
AT-ON, Nondestructive Testing Ultrasound
- OENORM EN ISO 22232-2:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
- OENORM EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
- OENORM EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
- OENORM EN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
- OENORM EN ISO 18563-1:2021 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO/DIS 18563-1:2021)
CH-SNV, Nondestructive Testing Ultrasound
- SN EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
- SN EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
- SN EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)