ZH
RU
ES

Specific rotation and molecular weight

Specific rotation and molecular weight, Total:499 items.

In the international standard classification, Specific rotation and molecular weight involves: Rotating machinery, Electromechanical components for electronic and telecommunications equipment, Photography, Elements of buildings, Metrology and measurement in general, Thermodynamics and temperature measurements, Products of the textile industry, Non-ferrous metals, Physics. Chemistry, Resistors, Adhesives, Non-metalliferous minerals, Rubber and plastics products, Plastics, Solar energy engineering, Aircraft and space vehicles in general, Nuclear energy engineering, Milk and milk products, Paints and varnishes, Fibre optic communications, Analytical chemistry, Vibrations, shock and vibration measurements, Agricultural machines, implements and equipment, Textile auxiliary materials, Furniture, Acoustics and acoustic measurements, Measurement of volume, mass, density, viscosity, Veterinary medicine, Animal feeding stuffs, Inorganic chemicals, Cereals, pulses and derived products, Quality, Vacuum technology, Non-destructive testing, Aids for disabled or handicapped persons, Textile fibres, Conducting materials, Electricity. Magnetism. Electrical and magnetic measurements, Geology. Meteorology. Hydrology, Measurement of fluid flow, Electrical engineering in general, Raw materials for rubber and plastics, Protection of and in buildings, Electronic tubes, Magnetic materials, Radiation measurements, Iron and steel products, Components and accessories for telecommunications equipment, Equipment for petroleum and natural gas industries, Spices and condiments. Food additives, Interface and interconnection equipment, Farming and forestry, Water quality, Edible oils and fats. Oilseeds, Quantities and units, Ferrous metals, Leather technology, Telecommunication systems, Waxes, bituminous materials and other petroleum products, Petroleum products in general, Valves, Paint ingredients, Protection against dangerous goods, Soil quality. Pedology, Electrical accessories.

BE-NBN, Specific rotation and molecular weight

NBN I-879-1968
NBN B 11-203-1982
NBN B 11-203-1980
NBN X 02-108-1989 Quantifies and units of physical chemistry and molecular physics

National Aeronautics and Space Administration (NASA), Specific rotation and molecular weight

NASA NACA-TM-910-1939 Measurements on a low-wing model in the rotating jet and comparison with flight measurements
NASA NACA-RM-L8I03-1948 The effects of high-lift devices on the low-speed stability characteristics of a tapered 37.5 degree sweptback wing of aspect ratio 3 in straight and rolling flow
NASA NACA-RM-A51G31-1951 The forces and pressure distribution at subsonic speeds on a plane wing having 45 degrees of sweepback, an aspect ratio of 3, and a taper ratio of 0.5
NASA NACA-RM-A52D22-1952 The forces and pressure distribution at subsonic speeds on a cambered and twisted wing having 45 degrees of sweepback and aspect ratio of 3 and a taper ratio of 0.5

Korean Agency for Technology and Standards (KATS), Specific rotation and molecular weight

KS C IEC 60034-27-3:2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
KS C IEC 60034-8:2019 Rotating electrical machines－Part 8：Terminal markings and direction of rotation
KS C IEC 60512-25-1:2004 Connectors for electronic equipment-Tests and measurements-Part 25-1:Test 25a-Crosstalk ratio
KS C IEC 60512-25-1:2014 Connectors for electronic equipment－Tests and measurements－Part 25－1：Test 25a－Crosstalk ratio
KS C IEC 60512-25-7-2009(2009) Connectors for electronic equipment－Tests and measurements－Part 25-7：Test 25g：Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
KS M ISO 7724-2-2007(2017) Paints and varnishes－Colorimetry－Part 2：Colour measurement
KS M ISO 7724-2-2007(2022) Paints and varnishes－Colorimetry－Part 2：Colour measurement
KS C IEC 60512-25-7:2009 Connectors for electronic equipment-Tests and measurements-Part 25-7:Test 25g:Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
KS C IEC 60512-25-7:2014 Connectors for electronic equipment－Tests and measurements－Part 25-7：Test 25g：Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
KS D ISO 17974:2011 Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS B ISO 10816-7:2017 Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
KS D ISO 11433:2012 Nickel alloys-Determination of titanium content-Diantipyrylmethane molecular absorption spectrometric method
KS B 50032-2005(2020) Gas volume meters－Part 3：Rotary pistongas meters and turbine gas meters
KS D ISO 17973:2011 Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS C IEC 61280-2-2:2022 Fibre optic communication subsystem test procedures — Part 2-2: Digital systems — Optical eye pattern, waveform and extinction ratio measurement
KS P ISO 7176-5-2011(2016) Wheelchairs－Part 5：Determination of dimensions,mass and manoeuvring space
KS K ISO 920:2018 Wool — Determination of fiber length(barbe and hauteur) using a comb sorter
KS K ISO 920:2014 Wool — Determination of fiber length(Barbe and Hauteur) using a comb sorter
KS C IEC 61280-2-2-2007(2017) Fiber optic communication subsystem basic test procedures－Part 2-2：Digital systems－Optical eye pattern, waveform, and extinction ratio measurement
KS C IEC 60151-0-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 0：Precautions relating to methods of measurement of electronic tubes and valves
KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS Q ISO 3951:2006 Sampling procedures and charts for inspection by variables for percent nonconforming
KS C IEC 61580-1-2005(2020) Methods of measurement for waveguides－Part 1：Decoupling and rotation of the plane of polarization
KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS A ISO 31-9-2001(2011) Quantities and units－Part 9：Atomic and nuclear physics
KS C IEC 60393-2:2004 Potentiometers for use in electronic equipment－Part 2：Sectional specification－Lead－screw actuated and rotary preset potentiometers
KS P ISO 7176-5:2011 Wheelchairs－Part 5：Determination of dimensions,mass and manoeuvring space
KS C IEC 61280-2-9-2003(2018)
KS A ISO 31-8-2001(2011) Quantities and units－Part 8：Physical chemistry and molecular physics
KS C IEC 60151-1-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 1：Measurement of electrode current
KS C IEC 60393-2:2020 Potentiometers for use in electronic equipment Part 2: Sectional specification. Lead-screw actuated and rotary preset potentiometer.
KS C IEC 60151-3-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 3：Measurement of equivalent input and output admittances
KS A ISO 80000-10:2020 Quantities and units — Part 10: Atomic and nuclear physics
KS A ISO 80000-10:2015 Quantities and units－Part 10：Atomic and nuclear physics
KS C IEC 61280-2-4-2003(2008) Fiber optic communication subsystem basic test procedures－Part 2－4：Test procedures for digital systems－Bit-rate tolerance measurement
KS A ISO 31-8:2012 Quantities and units－Part 8：Physical chemistry and molecular physics
KS A ISO 80000-9:2020 Quantities and units — Part 9: Physical chemistry and molecular physics
KS C IEC 60151-4-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 4：Methods of measuring noise factor

KR-KS, Specific rotation and molecular weight

KS C IEC 60034-27-3-2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
KS C IEC 60034-8-2019 Rotating electrical machines－Part 8：Terminal markings and direction of rotation
KS C IEC 61280-2-2-2022 Fibre optic communication subsystem test procedures — Part 2-2: Digital systems — Optical eye pattern, waveform and extinction ratio measurement
KS K ISO 920-2018 Wool — Determination of fiber length(barbe and hauteur) using a comb sorter
KS Q ISO 3951-2006 Sampling procedures and charts for inspection by variables for percent nonconforming
KS B ISO 18437-5-2022 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element an
KS C IEC 60393-2-2020 Potentiometers for use in electronic equipment Part 2: Sectional specification. Lead-screw actuated and rotary preset potentiometer.
KS B ISO 18437-5-2017 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element an
KS A ISO 80000-10-2020 Quantities and units — Part 10: Atomic and nuclear physics
KS A ISO 80000-9-2020 Quantities and units — Part 9: Physical chemistry and molecular physics

International Electrotechnical Commission (IEC), Specific rotation and molecular weight

IEC 60034-27-3:2015 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
IEC 60034-8:2007+AMD1:2014 CSV Rotating electrical machines - Part 8: Terminal markings and direction of rotation
IEC 60034-8:2007/AMD1:2014 Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation
IEC 60512-25-1:2001 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a; Crosstalk ratio
IEC TS 60034-27-2:2012 Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines
IEC TS 60034-27:2006 Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
IEC 60773:2021 Rotating electrical machines - Test methods and apparatus for the measurement of the operational characteristics of brushes
IEC TS 60034-32:2016 Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings
IEC 2/1384/DTS:2006 IEC 60034-27-TS, Ed. 1: Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
IEC 60512-25-7:2004 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)
IEC 2/1618/CD:2010 IEC/TS 60034-27-2, Ed. 1: Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines
IEC 61788-4:2020 RLV Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
IEC 61280-2-2:2008 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform, and extinction ratio measurement
IEC 61280-2-2:2005 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform, and extinction ratio measurement
IEC 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
IEC TR 62797:2013 International comparison of measurements of the magnetic moment using Vibrating Sample Magnetometers (VSM) and Superconducting Quantum Interference Device (SQUID) magnetometers
IEC 2/1651/CD:2011 IEC/TS 60034-27-3, Ed. 1: Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
IEC 61580-1:1996 Methods of measurement for waveguides - Part 1: Decoupling and rotation of the plane of polarization
IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines
IEC 60393-2:1989 Potentiometers for use in electronic equipment; part 2: sectional specification; lead-screw actuated and rotary preset potentiometers
IEC 60393-2:2015 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers
IEC 61280-2-2:2012/COR1:2015 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement; Corrigendum 1

Danish Standards Foundation, Specific rotation and molecular weight

DS/EN 60034-8:2008 Rotating electrical machines - Part 8: Terminal markings and direction of rotation
DS/EN 60512-25-1:2002 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio
DS/CLC/TS 60034-27:2011 Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
DS/CLC IEC/TS 60034-32:2021 Rotating electrical machines – Part 32: Measurement of stator end-winding vibration at form-wound windings
DS/EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
DS/EN ISO 4254-10:2010 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes
DS/EN ISO 4254-10/AC:2010 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes
DS/EN 61280-2-2:2013 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
DS/ISO 3219-1:2021 Rheology – Part 1: Vocabulary and symbols for rotational and oscillatory rheometry
DS/EN ISO 10424-2:2008 Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections
DS/EN 61280-2-9:2009 Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
DS/EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics
DS/ISO 3219-2:2021 Rheology – Part 2: General principles of rotational and oscillatory rheometry
DS/EN 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
DS/EN ISO 787-25:2007 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method
DS/ISO 31/8:1984 Quantities and units of physical chemistry and molecular physics
DS/EN ISO 80000-9:2013 Quantities and units - Part 9: Physical chemistry and molecular physics

AENOR, Specific rotation and molecular weight

UNE-EN 60034-8:2008/A1:2014 Rotating electrical machines - Part 8: Terminal markings and direction of rotation
UNE-EN 60512-25-1:2002 Connectors for electronic equipment - Tests and measurements -- Part 25-1: Test 25a - Crosstalk ratio.
UNE-EN 60034-8:2008 Rotating electrical machines -- Part 8: Terminal markings and direction of rotation (IEC 60034-8:2007).
UNE-EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements -- Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
UNE-EN ISO 4254-10:2010 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

Professional Standard - Agriculture, Specific rotation and molecular weight

JB/T 51220.1-1994 Compound and specific gravity seed cleaning machine product quality classification and other quality indicators
JB/T 51220.2-1994 Test method for product quality classification of compound and specific gravity seed cleaners

German Institute for Standardization, Specific rotation and molecular weight

DIN EN 60512-25-1:2002-08 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a: Crosstalk ratio (IEC 60512-25-1:2001); German version EN 60512-25-1:2001 / Note: To be replaced by DIN IEC 60512-25-1 (2004-10).
DIN EN 60512-25-1:2002 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a: Crosstalk ratio (IEC 60512-25-1:2001); German version EN 60512-25-1:2001
DIN IEC/TS 60034-27-3:2012 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 2/1651/CD:2011)
DIN EN 60512-25-7:2005-12 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and standing voltage wave ratio (VSWR) (IEC 60512-25-7:2004); German version EN 60512-25-7:2005
DIN EN ISO 4254-10:2011-07 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009); German version EN ISO 4254-10:2009 + AC:2010 / Note: Applies in conjunction with DIN EN ISO 4254-1 (2011-05).
DIN 9020-3:1983 Aerospace; mass breakdown for aircraft heavier than air; group mass statement
DIN ISO 10816-7:2009-08 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts (ISO 10816-7:2009)
DIN 45922-14:1983 Harmonized system of quality assessment for electronic components; sectional specification: rotary precision potentiometers
DIN EN 61280-2-2:2009 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (IEC 61280-2-2:2008); German version EN 61280-2-2:2008
DIN EN 13855-1:2003-09 Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation; German version EN 13855-1:2003
DIN 45922-13:1979 Harmonized system of quality assessment for electronic components; sectional specification: low power single turn rotary potentiometers
DIN EN 13855-1:2003 Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation; German version EN 13855-1:2003
DIN IEC/TR 62797:2014-06*DIN SPEC 42797:2014-06 International comparison of measurements of the magnetic moment using vibrating sample magnetometers (VSM) and superconducting quantum interference device (SQUID) magnetometers (IEC/TR 62797:2013)
DIN 9020-4:1983 Aerospace; mass breakdown for aircraft heavier than air; detail mass statement
DIN 9020-3 Bb.1:1983 Aerospace; mass breakdown for aircraft heavier than air; group mass statement; condensed version
DIN 6809-1:2010-03 Clinical dosimetry - Part 1: Radiation quality of photon and electron radiation
DIN EN ISO 10424-2:2008 Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections (ISO 10424-2:2007); English version EN ISO 10424-2:2007
DIN EN ISO 10424-2:2008-07 Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections (ISO 10424-2:2007); English version EN ISO 10424-2:2007
DIN 53019-3:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections
DIN 9020-5:1992-02 Aerospace; mass breakdown for aircraft heavier than air; dimensional and construction data
DIN EN 60393-2:2016-12 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers (IEC 60393-2:2015); German version EN 60393-2:2016
DIN CLC/TS 60034-27:2011 Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines (IEC/TS 60034-27:2006); German version CLC/TS 60034-27:2011
DIN 9020-1:1983 Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; survey
DIN EN ISO 10280:1996 Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method (ISO 10280:1991); German version EN ISO 10280:1995
DIN EN 61280-2-9:2009-12 Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems (IEC 61280-2-9:2009); German version EN 61280-2-9:2009 / Note: DIN EN 61280-2-...
DIN EN ISO 80000-10:2020-02 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019); German version EN ISO 80000-10:2019
DIN EN 141101:1992 Harmonized system of quality assessment for electronic components; detail specification: lead-screw actuated and rotary preset potentiometers; german version EN 141101:1992
DIN 6800-2:2020-08 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation
DIN 25456-1:1999 Neutron fluence measurement - Part 1: Fast-neutron fluence determination with activation and fission detectors
DIN EN 12067-2:2020-03 Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types; German and English version prEN 12067-2:2019 / Note: Date of issue 2020-01-31*Intended as replacement for DIN EN 12067-2 (2004-06).
DIN EN 12067-2:2004-06 Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types; German version EN 12067-2:2004 / Note: To be replaced by DIN EN 12067-2 (2015-12), DIN EN 12067-2 (2020-03).
DIN 43633-1:2011 Centre break disconnector - Part 1: Rated voltage 123 kV - Terminal and mounting dimensions, layout
DIN EN ISO 80000-9:2020-02 Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2019); German version EN ISO 80000-9:2019
DIN EN ISO 787-25:2019-06 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:2019); German version EN ISO 787-25:2019

CU-NC, Specific rotation and molecular weight

NC 66-03-1987 Electronic and Electrotechnical Industry. "Caribe 416" Television Receiver. Quality SDecifications

International Organization for Standardization (ISO), Specific rotation and molecular weight

ISO 8478:2017 Optics and photonics - Camera lenses - Measurement of ISO spectral transmittance
ISO 11433:2020 Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption method
ISO 19929:2017 Plastics - Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
ISO 17974:2002 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
ISO 10534-1:1996 Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 1: Method using standing wave ratio
ISO 3951:1981 Sampling procedures and charts for inspection by variables for percent defective
ISO 17973:2016 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
ISO 17973:2002 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
ISO 24477:2022 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges
ISO/TS 24154:2005 Hydrometry - Measuring river velocity and discharge with acoustic Doppler profilers
ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
ISO 10424-2:2007 Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections
ISO 10540-1:2003 Animal and vegetable fats and oils - Determination of phosphorus content - Part 1: Colorimetric method
ISO 31-8:1973 Title missing - Legacy paper document
ISO 31-8:1980 Quantities and units of physical chemistry and molecular physics
ISO 24236:2005 Surface chemical analysis - Auger electron spectroscopy - Repeatability and constancy of intensity scale
ISO 7176-5:1986 Wheelchairs; Part 5 : Determination of overall dimensions, mass and turning space
ISO 16014-4:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 18437-5:2011 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 5: Poisson ratio based on comparison between measurements and finite element analysis
ISO 80000-10:2009 Quantities and units - Part 10: Atomic and nuclear physics
ISO 16014-1:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles
ISO 80000-9:2009 Quantities and units - Part 9: Physical chemistry and molecular physics
ISO 31-8:1992 Quantities and units; part 8: physical chemistry and molecular physics
ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
ISO 16014-2:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
ISO 16014-4:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
ISO 16014-3:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
ISO 16014-2:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
ISO 10280:1991 Steel and iron; determination of titanium content; diantipyrylmethane spectrophotometric method
ISO 31-10:1992 Quantities and units; part 10: nuclear reactions and ionizing radiations
ISO 80000-10:2019 Quantities and units — Part 10: Atomic and nuclear physics
ISO 80000-9:2019 Quantities and units — Part 9: Physical chemistry and molecular physics

British Standards Institution (BSI), Specific rotation and molecular weight

BS EN 60512-25-1:2001 Connectors for electronic equipment. Test and measurements. Test 25a. Crosstalk ratio
BS 5395-2:1984 Stairs, ladders and walkways - Code of practice for the design of helical and spiral stairs
BS 6810-1:1987 Determination of metals in textiles - Analysis by atomic absorption and colorimetric spectroscopy
BS ISO 11433:1993+A1:2013 Nickel alloys. Determination of titanium content. Diantipyrylmethane molecular absorption spectrometric method
BS ISO 19929:2017 Plastics. Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
20/30408871 DC BS ISO 11433. Nickel alloys. Determination of titanium content. Diantipyrylmethane molecular absorption method
BS ISO 17974:2002 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
BS QC 410100:1990 Harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Sectional specification: lead screw actuated and rotary preset potentiometers
BS ISO 17973:2003 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
21/30426752 DC BS ISO 24477. Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for spinning rotor gauges
BS CECC 41400:1980 Harmonized system of quality assessment for electronic components: sectional specification: rotary precision potentiometers
BS EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
BS QC 960100:1992 Harmonized system of quality assessment for electronic components - Electromechanical switches for use in electronic equipment - Sectional specification for rotary switches
BS CECC 41100:1978 Harmonized system of quality assessment for electronic components: sectional specification: lead screw actuated and rotary preset potentiometers
BS EN 61280-2-2:2005 Fibre optic communication subsystem test procedures - Digital systems - Optical eye pattern, waveform and extinction ratio measurement
BS QC 410400:1992 Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for rotary precision potentiometers
BS EN 13855-1:2003 Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Test method by rotation
BS DD ISO/TS 24154:2006 Hydrometry - Measuring river velocity and discharge with acoustic Doppler profilers
BS QC 410300:1992 Harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Sectional specification for single-turn rotary low-power wirewound and non-wirewound potentiometers
PD IEC/TR 62797:2013 International comparison of measurements of the magnetic moment using vibrating sample magnetometers (VSM) and superconducting quantum interference device (SQUID) magnetometers
BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS ISO 24477:2022 Vacuum technology.Vacuum gauges.Specifications, calibration and measurement uncertainties for spinning rotor gauges
BS QC 410200:1992 Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for single-turn rotary power potentiometers
BS CECC 41300:1979 Harmonized system of quality assessment for electronic components - Sectional specification: low power single-turn rotary potentiometers
BS EN 60393-2:2016 Potentiometers for use in electronic equipment. Sectional specification. Lead-screw actuated and rotary preset potentiometers
BS 3727-14:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method)
BS EN 61280-2-2:2012 Fibre optic communication subsystem test procedures. Digital systems. Optical eye pattern, waveform and extinction ratio measurement
22/30422369 DC BS ISO 5109. Evaluation method for the resonance frequency of multi-copter UA by measurement of rotor and body frequencies
BS CECC 96100:1989 Harmonized system of quality assessment for electronic components. Sectional specification including blank detail specification: rotary switches
BS CECC 96100:1988 Harmonized system of quality assessment for electronic components - Sectional specification including blank detail specification: rotary switches
BS EN ISO 10280:1995 Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method
BS ISO 80000-9:2009 Quantities and units - Physical chemistry and molecular physics
BS ISO 31-8:1992 Quantities and units - Physical chemistry and molecular physics
BS 770-2:1976 Methods for chemical analysis of cheese - Determination of water content (reference and routine methods)
BS ISO 16014-2:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
BS 3727-1:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of aluminium (photometric method)
BS 3727-2:1968 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of boron (photometric method)
BS 3727-4:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of chromium (photometric method)
BS 3727-5:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method)
BS 3727-6:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of copper (photometric method)
BS 3727-7:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of iron (photometric method)
BS 3727-8:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of manganese (photometric method)
BS 3727-9:1967 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (photometric method)
BS 3727-13:1965 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of titanium (photometric method)
BS 3727-15:1968 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (photometric method)
BS EN ISO 10280:1991 Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method
BS EN ISO 80000-9:2013+A1:2011 Quantities and units. Physical chemistry and molecular physics
BS EN ISO 80000-9+A1:2009 Quantities and units. Physical chemistry and molecular physics
BS ISO 80000-9:2009+A1:2011 Quantities and units. Physical chemistry and molecular physics
BS EN ISO 80000-9:2019 Quantities and units - Physical chemistry and molecular physics
BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 16014-1:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
BS 3727-3:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of carbon
BS 3727-21:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (atomic absorption method)
BS 3727-10:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.020-0.25 per cent (photometric method)
BS 3727-11:1965 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.001-0.020 per cent (photometric method)
BS EN 60512-17-2:2011 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation
BS ISO 18437-5:2011 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Poisson ratio based on comparison between measurements and finite element analysis

Association Francaise de Normalisation, Specific rotation and molecular weight

NF C51-118/A1*NF EN 60034-8/A1:2014 Rotating electrical machines - Part 8 : terminal markings and direction of rotation - Amendment 1
NF C93-400-25-1*NF EN 60512-25-1:2002 Connectors for electronic equipment - Tests and measurements - Part 25-1 : test 25a - Crosstalk ratio
NF EN 13855-1:2003 Articles manufacturés garnis de plumes et duvets - Mesurage de l'épaisseur et de la compressibilité des coussins - Partie 1 : méthode de mesurage par rotation
NF C51-127-1*NF EN IEC 60034-27-1:2018 Rotating electrical machines - Part 27-1 : off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
NF C51-127-3*NF EN 60034-27-3:2016 Rotating electrical machines - Part 27-3 : dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
NF A54-107:2021 Nickel alloys - Determination of titanium content - Diantipyrylmethane molecular absorption method
NF ISO 11433:2021 Alliages de nickel - Détermination de la teneur en titane - Méthode par spectrophotométrie d'absorption moléculaire au diantipyrylméthane
NF C93-400-25-7*NF EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Part 25-7 : test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR).
NF EN 60512-25-7:2005 Connecteurs pour équipements électroniques - Essais et mesures - Partie 25-7 : essais 25g : impédance, coefficient de réflexion et rapport d'ondes stationnaires en tension (VSWR)
NF ISO 10816-7:2011 Vibrations mécaniques - Évaluation des vibrations des machines par mesurages sur les parties non tournantes - Partie 7 : pompes rotodynamiques pour applications industrielles, y compris mesurages sur les arbres tournants
NF C93-807-2-2*NF EN 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2 : digital systems - Optical eye pattern, waveform and extinction ratio measurement
NF T36-004-2:1988 Paints and varnishes. Colorimetry. Part 2 : colour measurement.
NF X21-054*NF ISO 17973:2006 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis.
NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.
NF C83-253:1983 Harmonized system of quality assessment for electronic components. Sectional specification. Low power single turn. Rotary potentiometers.
NF C93-807-2-2:2005 Fibre optic communication subsystem test procedures - Part 2-2 : Digital systems - Optical eye pattern waveform, and extinction ratio measurement.
NF EN 61280-2-2:2012 Procédures d'essai des sous-systèmes de télécommunication fibroniques - Partie 2-2 : systèmes numériques - Mesure du diagramme de l'œil optique, de la forme d'onde et du taux d'extinction
NF C31-888-4*NF EN IEC 61788-4:2020 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
NF D90-229-1*NF EN 13855-1:2003 Manufactured articles solely filled with feather and down - Measurement of thickness and compressibility of cushions - Part 1 : test method by rotation
NF U02-001-10*NF EN ISO 4254-10:2011 Agricultural machinery - Safety - Part 10 : rotary tedders and rakes
NF C83-251:1982 Composants électroniques - Système CENELEC d'assurance de la qualité - Potentiomètres de réglage à commande par vis et rotatifs - Spécification intermédiaire.
NF EN IEC 61788-4:2020 Supraconductivité - Partie 4 : mesurage du rapport de résistance résiduelle - Rapport de résistance résiduelle des composites supraconducteurs de Nb-Ti et de Nb3Sn
NF C93-400-17-2*NF EN 60512-17-2:2012 Connectors for electronic equipment - Tests and measurements - Part 17-2 : cable clamping tests - Test 17b : cable clamp resistance to cable rotation
NF T20-263:1969 Chemical analysis of hydrochloric and nitric acids. Turbidimetric determination of sulphates.
NF C83-413:1988 Harmonized system of quality assessment for electronic components. Rotary switches. Sectional specification including blank detail specification.
FD CEN/TR 17236:2020 Cigarettes électroniques et e-liquides - Composants dont la teneur est à mesurer dans l'aérosol des produits de vapotage
NF C51-127-4*NF EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4 : measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
FD X08-012-2:2015 Colour - Colorimetry - Colorimetric characteristics of coloured samples - Part 2 : practical considerations concerning instrumentation and reflection measurement
NF T51-211-1*NF EN ISO 3219-1:2021 Rheology - Part 1 : vocabulary and symbols for rotational and oscillatory rheometry
NF C83-250-2*NF EN 60393-2:2016 Potentiometers for use in electronic equipment - Part 2 : sectional specification - Lead-screw actuated and rotary preset potentiometers
NF EN IEC 60034-27-4:2018 Machines électriques tournantes - Partie 27-4 : mesure de la résistance d'isolement et de l'index de polarisation sur le système d'isolation des enroulements des machines électriques tournantes
NF A06-314*NF EN ISO 10280:1995 Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method.
NF EN 62670-3:2017 Concentrateurs photovoltaïques (CPV) - Essai de performances - Partie 3 : mesurages de performances et rapport de puissance
NF X02-300-10*NF EN ISO 80000-10:2019 Quantities and units - Part 10 : atomic and nuclear physics
NF EN ISO 80000-10:2019 Grandeurs et unités - Partie 10 : physique atomique et nucléaire
NF T51-211-2*NF EN ISO 3219-2:2021 Rheology - Part 2 : general principles of rotational and oscillatory rheometry
NF X02-300-9:2013 Quantities and units - Part 9: physical chemistry and molecular physics
NF X02-208:1994 Quantities and units. Part 8 : physical chemistry and molecular physics.
NF EN 61280-2-9:2009 Procédures d'essai des sous-systèmes de télécommunications à fibres optiques - Partie 2-9 : systèmes numériques - Mesure du rapport signal sur bruit optique pour les systèmes multiplexés à répartition en longueur d'onde dense
NF C93-593-1*NF EN 61580-1:2002 Methods of measurement for waveguides - Part 1 : decoupling and rotation of the plane of polarization
FD CEN/TR 16269:2011 Air ambiant - Guide pour le mesurage des anions et des cations dans la fraction PM2,5
NF X02-300-9*NF EN ISO 80000-9:2019 Quantities and units - Part 9 : physical chemistry and molecular physics
NF EN ISO 80000-9:2019 Grandeurs et unités - Partie 9 : chimie physique et physique moléculaire

Lithuanian Standards Office , Specific rotation and molecular weight

LST EN 60034-8-2007 Rotating electrical machines - Part 8: Terminal markings and direction of rotation (IEC 60034-8:2007)
LST EN 60512-25-1-2002 Connectors for electronic equipment. Tests and measurements. Part 25-1: Test 25a: Crosstalk ratio (IEC 60512-25-1:2001)
LST CLC/TS 60034-27-2011 Rotating electrical machines -- Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines (IEC/TS 60034-27:2006)
LST EN 60512-25-7-2005 Connectors for electronic equipment. Tests and measurements. Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR) (IEC 60512-25-7:2004)
LST EN ISO 4254-10:2010 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)
LST EN ISO 4254-10:2010/AC:2010 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)
LST EN 61280-2-2-2008 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (IEC 61280-2-2:2008)
LST EN 61280-2-2-2013 Fibre optic communication subsystem test procedures -- Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (IEC 61280-2-2:2012)
LST EN ISO 10424-2:2008 Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections (ISO 10424-2:2007)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Specific rotation and molecular weight

GB/T 20833.2-2016 Rotating electrical machines—The stator winding insulation of rotating electrical machines—Part 2: On-line partial discharge measurements on
GB/T 20833.1-2016 Rotating electrical machines—The stator winding insulation of rotating electrical machines—Part 1: Off-line partial discharge measurements
GB/T 13747.19-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part19：Determination of titanium content—Diantipyrylmethane spectrophotometry and the inductively coupled plasma atomic emission spectrometry

国家市场监督管理总局、中国国家标准化管理委员会, Specific rotation and molecular weight

GB/T 20833.3-2018 Rotating electrical machines—Stator winding insulation of rotating electrical machines—Part 3: Dielectric dissipation factor measurement
GB/T 5095.2501-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: Crosstalk ratio
GB/T 36214.1-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles
GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method
GB/T 36214.5-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection

IN-BIS, Specific rotation and molecular weight

RU-GOST R, Specific rotation and molecular weight

GOST 8.070-2014 State system for ensuring the uniformity of measurements. State verification schedule for means measuring absorbed doses and rate of absorbed dose, dose equivalent and rate of equivalent doses of photon and electron radiation
GOST IEC/TS 60034-27-2015 Rotating electrical machines. Part 27. Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
GOST IEC/TS 60034-27-2-2015 Rotating electrical machines. Part 27-2. On-line partial discharge measurements on the stator winding insulation of rotating electrical machines
GOST 25984.1-1983 Chrysotile asbestos. Methods for determination of fractional composition and foreign matters content
GOST R 51458-1999 Cheese and processed cheese products. Determination of mass percent of total phosphorus. Molecular absorption spectrometric method
GOST R 53101-2008 Medical remedies for veterinary use, feed and feed additives. Detection of mass fraction of arsenic by atom absorbtion spectrometric method
GOST 18184.7-1979 Niobium pentoxide. Method for the determination of potassium and sodium content
GOST 22091.2-1984 X-ray devices. The methods of measuring of the current and the voltage of injection of X-ray betatrons
GOST R 53351-2009 Medical remedies for animals, feed and feed additives. Detection of mass fraction of selenium by atom absorbtion spectrometric method
GOST R 53100-2008 Medical remedies for veterinary use, feed and feed additives. Detection of mass fraction of cadmium and lead by atom absorbtion spectrometric method
GOST R 53352-2009 Medical remedies for animals, feed and feed additives. Detection of mass fraction of mercury by atom absorbtion spectrometric method
GOST IEC 60034-2A-2012 Rotating electrical machines. Part 2. Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for fraction vehicles). Measurement of losses by the calorimetric method
GOST R 54352-2011 Food common salt. Determination of a mass fraction of magnesium-ion and calcium-ion by complexonometric method
GOST 31633-2012 Milk and milk products. Determination of mass portion of milk fat using photocolorimetry method
GOST R 52963-2008 Water. Methods for determination of alkalinity, and mass concentration of carbonates and hydrocarbonates
GOST 17631-1972 Dressed fur skins and coat sheepskins. Method for determination of ash mass persentage in skin tissue
GOST R 53018-2008 Dressed fur and sheepskins. Method of determining the untied fatty substances mass fraction
GOST R 53013-2008 Dressed fur and sheepskins. Methods of determining the chromium oxide (III) mass fraction
GOST R 50779.74-1999 Statistical methods. Sampling procedures and charts for inspection by variables for percent nonconforming

IECQ - IEC: Quality Assessment System for Electronic Components, Specific rotation and molecular weight

PQC 28-1984 Switches for Use in Electronic Components: Sectional Specification: Rotary Switches of Assessed Quality

ZA-SANS, Specific rotation and molecular weight

SANS 60034-27:2007 Rotating electrical machines Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
SANS 61280-2-2:2009 Fibre optic communication subsystem test procedures Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
SANS 61280-2-2:2006 Fibre optic communication subsystem test procedures Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
SANS 1808-9:2008 Water supply and distribution system components Part 9: Metering taps and valves (metallic bodies)

European Committee for Electrotechnical Standardization（CENELEC）, Specific rotation and molecular weight

EN IEC 60034-27-1:2018 Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
EN 60034-27-3:2016 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
CLC/TS 60034-27-2011 Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
CLC IEC/TS 60034-32:2021 Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings
EN 60512-25-1:2001 Connectors for Electronic Equipment - Tests and Measurements Part 25-1: Test 25a - Crosstalk Ratio
EN 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
EN IEC 61788-4:2020 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
EN 60512-25-7:2005 Connectors for electronic equipment Tests and measurements Part 25-7: Test 25g Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
EN 60393-2:2016 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers
EN 61280-2-9:2009 Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
EN 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

ES-UNE, Specific rotation and molecular weight

UNE-EN 60034-27-3:2016 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (Endorsed by AENOR in August of 2016.)
UNE-EN ISO 4254-10:2010/AC:2010 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)
UNE-CLC IEC/TS 60034-32:2021 Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings (Endorsed by Asociación Española de Normalización in November of 2021.)
UNE-EN 61280-2-2:2012/AC:2015 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (Endorsed by AENOR in June of 2015.)
UNE-EN 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (Endorsed by AENOR in February of 2013.)
UNE-EN IEC 61788-4:2020 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (Endorsed by Asociación Española de Normalización in June of 2020.)
UNE-EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN ISO 10424-2:2007 Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections (ISO 10424-2:2007) (Endorsed by AENOR in January of 2008.)
UNE-EN 60393-2:2016 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers (Endorsed by AENOR in May of 2016.)
UNE-EN 61580-1:1996 METHODS OF MEASUREMENT FOR WAVEGUIDES. PART 1: DECOUPLING AND ROTATION OF THE PLANE OF POLARIZATION. (Endorsed by AENOR in December of 1996.)
UNE-EN 61280-2-9:2009 Fibre optic communication subsystem test procedures -- Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems (Endorsed by AENOR in July of 2009.)
UNE-EN ISO 80000-10:2021 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)
UNE-EN ISO 787-1:2018 General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982)
UNE-EN ISO 80000-9:2021 Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2019)

American Society for Testing and Materials (ASTM), Specific rotation and molecular weight

ASTM F2625-10 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM F2625-07 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM E321-20 Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)
ASTM E321-96(2012) Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)
ASTM E261-98 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM A569/A569M-91a(1993)e1 Standard Specification for Steel, Carbon (O. 15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Quality
ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D6579-00 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM E321-96 Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)
ASTM E321-96(2005) Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)
ASTM E244-80(1995) Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Mass Spectrometric Method) (Withdrawn 2001)
ASTM D6579-11(2020) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM UOP375-86 Calculation of UOP Characterization Factor and Estimation of Molecular Weight of Petroleum Oils
ASTM D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D5675-13 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM D6579-06 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D6579-11 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM E1938-97 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method
ASTM E1938-02 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method
ASTM D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM UOP434-83 Free Water and Volatile Hydrocarbon Content of Molecular Sieves

Professional Standard - Aviation, Specific rotation and molecular weight

HB/Z 5108.2-1999 Analytical method of phosphating solution Determination of chloride ion content by visual turbidimetry

CZ-CSN, Specific rotation and molecular weight

CSN 40 4016-1974 Ralalive measurements of activity and partical enission of radioactive products. Total flax measurement of a - or β - particles by a 4 π - proportional counter
CSN 40 4010-1971 Relative measurements of activity and partical emission of radioactive products. Speciíic activity relative measurements in liquid saturated layer.
CSN 23 0001 2332-1957
CSN ISO 10 280:1993 Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method
CSN 40 4012-1971 Measurement of ionizing radiation and particle emission of radionuclides. Relative activity measurement with internal proporlional counters.
CSN IEC 393-2:1993 Potentiometers for use in electronic equipment. Part 2: Sectional specification. Load-screw actuated and rotary preset potentiometers

工业和信息化部, Specific rotation and molecular weight

SJ/T 11462.2-2016 Encoders for electronic equipment Part 2: Incremental rotary encoders with specific specifications
YS/T 1445.4-2021 Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides Part 4: Determination of chloride ion content Silver chloride turbidimetric method
SJ/T 11462.2.1-2016 Encoders for electronic equipment Part 2-1: Blank detailed specification for incremental rotary encoders evaluation level EZ

Professional Standard - Machinery, Specific rotation and molecular weight

JB/T 54874-1999 Product quality classification of rotary and rotary impact cemented carbide construction drills
JB/T 51035.2-1999 Product Quality Grading of Agricultural Outboard Engines and Outboard Propellers

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Specific rotation and molecular weight

IPC TM-650 2.3.34.1-1995 Percentage of Flux on/in Flux-Coated and/or Flux-Cored Solder

Group Standards of the People's Republic of China, Specific rotation and molecular weight

T/YNSX 004-2022 Galvanized steel strip reinforced high molecular weight high density polyethylene (HMWHDPE) spiral corrugated pipe
T/YNSX 4-2020 Galvanized steel strip reinforced high molecular weight high density polyethylene (HMWHDPE) two-color spiral corrugated pipe
T/ZJBX 10-2021 Determination of the proportion of protein hydrolysates with relative molecular weight less than 1000u in protein feed

未注明发布机构, Specific rotation and molecular weight

BS EN ISO 4254-10:2009(2011) Agricultural machinery — Safety Part 10 : Rotary tedders and rakes
BS EN 61280-2-2:2012(2015) Fibre optic communication subsystem test procedures Part 2 - 2 : Digital systems — Optical eye pattern, waveform and extinction ratio measurement
BS 5395-2:1984(2012) Stairs, ladders and walkways – Part 2 : Code of practice for the design of helical and spiral stairs
BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)
GJB 7618-2012 General specification for helicopter rotor cone measurement and dynamic balance analyzers

National Metrological Technical Specifications of the People's Republic of China, Specific rotation and molecular weight

JJF 1684-2017 Calibration Specification for Comparators for Measuring the Diameter,Angle and Straightness of Bearings'Tapered Roller

IE-NSAI, Specific rotation and molecular weight

I.S.67-1955 DETEMINATION OF THE PERCENTAGE OF FAT IN SEPARATED MILD AND BUTTERMILK

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Specific rotation and molecular weight

GB/T 25968-2010 Test methods of solar transmittance and solar absorptance of materials by spectrophotometer
GB/T 4325.17-2013 Methods for chemical analysis of molybdenum.Part 17:Determination of titanium content.Diantipyrylmethane spectrophotometry and inductively coupled plasma atomic emission spectrometry
GB/T 15299-1994 Potentiometers for use in electronic equipment. Part 2: Sectional specification. Lead-screw actuated and rotary preset potentiometers
GB 3102.8-1993 Quantities and units of physical chemistry and molecular physics
GB/T 36214.4-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 4:High-temperature method
GB/T 21864-2008 Standard test method for molecular weight averages and molecular weight distribution of polystyrene.High performance size-exclusion chromatography
GB/T 11348.1-1999 Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 1: General guidelines

RO-ASRO, Specific rotation and molecular weight

STAS 6516-1990 Fish and fish products. Net mass, components proportion and oil content determination
STAS 8556-1970 ELECTRIC AND ELECTRONIC ANALOGICAL ELEMENTS FOR AUTOMATION UNITS Rules for quality control Methods of test
STAS 8333-1989 Measuring and governing means of industrial processes ANALOGICAL ELECTRIC AND ELECTRONIC PRODUCTS General technical requirements
SR ISO 31-9:1995 Quantities and units - Part 9: Atomic and nuclear physics
STAS SR ISO 7176-5:1995 Wheelchairs. Part 5: Determination of overall dimensions, mass and turning space
SR ISO 31-8:1995 Quantities and units - Part 8: Physical chemistry and molecular physics
SR ISO 31-8/C1:1996 Quantities and units - Part 8: Physical chemistry and molecular physics
STAS 4640/1-1971 INDICATING ELECTRICAL MEA- SURING INSTRUMENTS AND THEIR ACCESSORIES Definitions and classification

VN-TCVN, Specific rotation and molecular weight

TCVN 4411-1987 Canned foods.Method for determination of net mass and components rate
TCVN 7870-9-2010 Quantities and units.Part 9: Physical chemistry and molecular physics

ES-AENOR, Specific rotation and molecular weight

GOSTR, Specific rotation and molecular weight

GOST 9568-1980 Pulp and paper. Method for determination of mass percentage of calcium
PNST 288-2018 Russian system of quality. Comparative testing of sarafans and skirts for girls of school age

Japanese Industrial Standards Committee (JISC), Specific rotation and molecular weight

JIS C 61280-2-2:2010 Fiber optic communication subsystem test procedures -- Optical eye pattern, waveform and extinction ratio measurement
JIS C 61280-2-2:2017 Fiber optic communication subsystem test procedures -- Part 2-2: Optical eye pattern, waveform and extinction ratio measurement
JIS K 0166:2011 Surface chemical analysis -- High-resolution Auger electron spectrometers -- Calibration of energy scales for elemental and chemical-state analysis
JIS K 0165:2011 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis
JIS C 9901:2000 Method of calculation and representation of energy efficiency standard achievement percentage of household electrical and electronic appliances
JIS C 5402-17-2:2015 Connectors for electronic equipment -- Tests and measurements -- Part 17-2: Cable clamping tests -- Test 17b: Cable clamp resistance to cable rotation
JIS Z 8000-10:2022 Quantities and units -- Part 10: Atomic and nuclear physics
JIS C 5260-2:2000 Potentiometers for use in electronic equipment -- Part 2: Sectional specification: Lead-screw actuated and rotary preset potentiometers
JIS Z 8000-9:2022 Quantities and units -- Part 9: Physical chemistry and molecular physics
JIS Z 8000-9:2015 Quantities and units -- Part 9: Physical chemistry and molecular physics
JIS Z 8202-8:2000 Quantities and units -- Part 8: Physical chemistry and molecular physics
JIS K 7252-1:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-4:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS K 7252-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method

European Committee for Standardization (CEN), Specific rotation and molecular weight

EN 13855-1:2003 Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation
EN 61280-2-2:2005 Fibre optic communication subsystem test procedures —Part 2-2: Digital systems — Optical eye pattern, waveform and extinction ratio measurement
EN ISO 10534-1:2001 Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio (ISO 10534-1:1996)
EN ISO 10424-2:2007 Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections
EN ISO 80000-10:2019 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)
EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics

YU-JUS, Specific rotation and molecular weight

JUS C.A1.546-1990 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determi- natlon of chromium In ctmtents from 0,01 to 2 % (m/m)
JUS B.H8.319-1987 Methods of analysis of coal and coke. Determination of carbon and hydrogen — Liebig method
JUS B.H8.390-1987 Methods of analisis of coal and coke. Brovvn coal and lignites. Detennination ofmoisture content. Indirect gravimetric method
JUS C.A1.603-1977 Metho?s for chemical analysis of copper and copper alloys. Turbidimetric determination of silver in copper and copper albys.

Professional Standard - Non-ferrous Metal, Specific rotation and molecular weight

YS/T 1593.5-2023 Methods for chemical analysis of crude lithium carbonate—Part 5：Determination of chloride content—Silver chloride nephelometry method
YS/T 1603.2-2023 Methods for chemical analysis of tungsten-based high specific gravity alloys Part 2: Determination of iron, nickel and copper contents by inductively coupled plasma atomic emission spectrometry
YS/T 928.1-2013 Methods for chemical analysis of nickel cobalt manganese composite hydrogenoxide.Part 1:Determination of chloride ion contents.Silver chloride turbidimetry
YS/T 1603.3-2023 Methods for chemical analysis of tungsten-based high specific gravity alloys Part 3: Determination of aluminum, magnesium and calcium contents by inductively coupled plasma mass spectrometry

American National Standards Institute （ANSI), Specific rotation and molecular weight

ANSI/ASAE D241.4-1993 Density, Specific Gravity, and Weight Moisture Relationships of Grain for Storage
ANSI/ASQC Z1.9-2003 Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming
ANSI/ASTM D6474:1999 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ANSI/ASTM D5296:1997 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03)

NL-NEN, Specific rotation and molecular weight

NEN-ISO 7627-4:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 4: Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) (ISO 7627-4:1983)
NEN-ISO 7627-5:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) (ISO 7627-5:1983)
NEN-ISO 7627-6:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985)
NEN-ISO 7627-3:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 3: Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) (ISO 7627-3:1983)
NEN 1211-1971 Quantities, SI units and their symbols Atomic and molecular phenomena
NEN 1226-1981 Quantities, SI units and their symbols Atomic and molecular phenomena

SE-SIS, Specific rotation and molecular weight

SIS SS 13 21 24-1983 Concrete testing - Aggregate - Particle density (pycnometer method) and water absorption

Professional Standard - Commodity Inspection, Specific rotation and molecular weight

SN/T 3002-2011 Determication of relative molecular weight and molecular weight distribution of polyethylene.Gel permeation chromatography method
SN/T 4183-2015 Determination of relative molecular weight and molecular weight distribution of polyolefins.High temperature gel permeation chromatography method

Institute of Electrical and Electronics Engineers (IEEE), Specific rotation and molecular weight

Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and T Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and Toolkits
Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and T Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and Toolkits
Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and T Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and Toolkits
Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and T Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and Toolkits
Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and T Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and Toolkits
Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and T Holistic Multidimensional Guidelines: Comparative Analysis: E-Education Standards, Guidelines, and Toolkits

CENELEC - European Committee for Electrotechnical Standardization, Specific rotation and molecular weight

EN 61280-2-2:2008 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern@ waveform and extinction ratio measurement
EN 61280-2-2:1999 Fibre Optic Communication Subsystem Basic Test Procedures - Part 2-2: Test Procedures for Digital Systems - Optical Eye Pattern@ Waveform@ and Extinction Ratio
EN 61280-2-9:2002 Fibre optic communication subsystem test produres Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems

HU-MSZT, Specific rotation and molecular weight

Standard Association of Australia （SAA）, Specific rotation and molecular weight

AS 3696.5:1989 Wheelchairs - Determination of overall dimensions, mass and turning space
AS 3778.6.1:2022 Measurement of water flow in open channels, Part 6.1: Measuring devices, instruments and equipment — Rotating-element current meters (ISO 2537:2007, IDT)
AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks
AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water

Malaysia Standards, Specific rotation and molecular weight

MS 133 Pt.D10-1999 Methods of test for paints and varnishes:part d10:colorimetry - colour measurement

Professional Standard - Petroleum, Specific rotation and molecular weight

SY/T 6154-1995 Static Nitrogen Adsorption Capacity Method for Determination of Rock Specific Surface and Pore Size Distribution

国家能源局, Specific rotation and molecular weight

SY/T 6154-2019 Static adsorption capacity method for determination of rock specific surface area and pore size distribution

Universal Oil Products Company (UOP), Specific rotation and molecular weight

UOP 375-2007 CALCULATION OF UOP CHARACTERIZATION FACTOR AND ESTIMATION OF MOLECULAR WEIGHT OF PETROLEUM OILS

IT-UNI, Specific rotation and molecular weight

UNI EN ISO 3219-1:2021 Rheology - Part 1: Vocabulary and symbols for rotational and oscillatory rheometry
UNI 4781-1961
UNI EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry

Professional Standard - Petrochemical Industry, Specific rotation and molecular weight

SH/T 0108-1992 Determination of average molecular weight and molecular weight distribution of certain polymeric additives (Size Exclusion Chromatography)
SH/T 0398-2007 Standard test method for molecular weight of petrolemn wax and petrolatum
SH/T 0398-1992 Petroleum Wax and Petroleum Fat Molecular Weight Determination

International Telecommunication Union (ITU), Specific rotation and molecular weight

ITU-T G.671 NOTE-2006 Transmission characteristics of optical components and subsystems
ITU-T G.671-2005 Transmission characteristics of optical components and subsystems SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Transmission media characteristics ?Characteristics of optical components and subsystems Study Group 15

Yunnan Provincial Standard of the People's Republic of China, Specific rotation and molecular weight

DB53/T 902-2019 Quality classification of Polygonatum yunnanensis seeds and seedlings

Indonesia Standards, Specific rotation and molecular weight

SNI 6989.20-2009

TH-TISI, Specific rotation and molecular weight

TIS 235.10-2013 Quantities and units.part 10: atomic and nuclear physics
TIS 235.9-2013 Quantities and units.part 9: physical chemistry and molecular physics
TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles

PL-PKN, Specific rotation and molecular weight

PN-EN IEC 61788-4-2020-12 E Superconductivity -- Part 4: Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (IEC 61788-4:2020)

PT-IPQ, Specific rotation and molecular weight

Professional Standard-Ships, Specific rotation and molecular weight

CB 1160.6-1986 Cast Alberyllium Cobalt Bronze for Ship Propellers Chemical Analysis Methods Atomic Absorption Spectrometry Determination of Cobalt Content
CB 1160.8-1986 Cast aluminum beryllium cobalt bronze for ship propeller - Chemical analysis method - Determination of iron content by atomic absorption spectrometry
CB 1160.11-1986 Cast Alberyllium Cobalt Bronze for Ship Propellers Chemical Analysis Methods Atomic Absorption Spectrometry for the Determination of Lead

The American Road & Transportation Builders Association, Specific rotation and molecular weight

AASHTO DIVISION I 8.7 Modulus of Elasticity and Poisson's Ratio(Standard Specifications for Highway Bridges, Div. 1 - Design)

国家技术监督局, Specific rotation and molecular weight

GB/T 3102.8-1993 Quantities and units of physical chemistry and molecular physics

TR-TSE, Specific rotation and molecular weight

TS 2744-1977 Clays Used For Ceramicware Particle-Size Analysis By Hydrometer find Pipet Methods

Society of Motion Picture and Television Engineers (SMPTE), Specific rotation and molecular weight

SMPTE 227M-1996 Television Digital Component Recording - 19-mm Type D-1 - Helical Data and Control Records