ZH
RU
ES

UV test analysis program

UV test analysis program, Total:103 items.

In the international standard classification, UV test analysis program involves: Fibre optic communications, Mechanical structures for electronic equipment, Water quality, Rotating machinery, Software development and system documentation, Installations in buildings, Metrology and measurement in general, Analytical chemistry, Insulating materials, Hydraulic construction, Optics and optical measurements, Diagnostic, maintenance and test equipment, Motor cycles and mopeds, Ceramics, Measurement of volume, mass, density, viscosity, Equipment for petroleum and natural gas industries.

US-CFR-file, UV test analysis program

CFR 40-1065.272-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.272:Nondispersive ultraviolet analyzer.
CFR 40-1065.250-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.250:Nondispersive infrared analyzer.
CFR 40-1065.1111-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.1111:Sample analysis.
CFR 40-1065.750-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.750:Analytical gases.
CFR 40-1065.295-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.295:PM inertial balance for field-testing analysis.
CFR 40-1065.280-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.280:Paramagnetic and magnetopneumatic O2 detection analyzers.
CFR 40-1065.284-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.284:Zirconia (ZrO2) analyzer.
CFR 40-1065.375-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.375:Interference verification for N2O analyzers.
CFR 40-1065.350-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.350:H2O interference verification for CO2 NDIR analyzers.
CFR 40-1065.269-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.269:Photoacoustic analyzer for ethanol and methanol.
CFR 40-1065.355-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.355:H2O and CO2 interference verification for CO NDIR analyzers.
CFR 40-1065.550-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.550:Gas analyzer range verification and drift verification.

Electronic Components, Assemblies and Materials Association, UV test analysis program

ECA EIA-364-49-2013 TP-49 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets

ECIA - Electronic Components Industry Association, UV test analysis program

EIA-364-49-2013 TP-49 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets

U.S. Environmental Protection Agency (U.S. EPA), UV test analysis program

EPA 40 CFR PART 136-2010 GUIDELINES ESTABLISHING TEST PROCEDURES FOR THE ANALYSIS OF POLLUTANTS

GB-REG, UV test analysis program

REG 40 CFR PART 136-2011 GUIDELINES ESTABLISHING TEST PROCEDURES FOR THE ANALYSIS OF POLLUTANTS

US-FCR, UV test analysis program

FCR 40 CFR PART 136-2013 GUIDELINES ESTABLISHING TEST PROCEDURES FOR THE ANALYSIS OF POLLUTANTS

British Standards Institution (BSI), UV test analysis program

22/30466943 DC BS EN 60794-1-214. Optical fibre cables - Part 1-214. Generic specification. Basic optical cable test procedures. Environmental test methods. Cable UV resistance test, Method F14
BS IEC 61745:1998 End-face image analysis procedure for the calibration of optical fibre geometry test sets
BS IEC 61745:1999 End-face image analysis procedure for the calibration of optical fibre geometry test sets
PD IEC/TR 60493-2:2010 Guide for the statistical analysis of ageing test data. Validation of procedures for statistical analysis of censored normally distributed data
BS ISO 17949:2013+A2:2018 Impact test procedures for road vehicles. Seating and positioning procedures for anthropomorphic test devices. Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions
BS ISO 13232-7:2005+A2:2023 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Standardized procedures for performing computer simulations of motorcycle impact tests
BS ISO 21820:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet photoluminescence image test method for analysing polytypes of boron- and nitrogen-doped SiC crystals
20/30349837 DC BS ISO 21820. Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet photoluminescence image test method for analyzing polytypes of boron and nitrogen doped SiC crystals
PD ISO/TS 17822-1:2014 In vitro diagnostic test systems. Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens. General requirements, ...
18/30374521 DC BS IEC 60794-1-215. Optical Fibre Cables. Part 1-215. Generic specification. Basic optical cable test procedures. Environmental test methods. Cable external freezing test, Method F15

IPC - Association Connecting Electronics Industries, UV test analysis program

IPC SPVC-LAT1-2010 ANALYTICAL PROCEDURES FOR PORTABLE LEAD-FREE ALLOY TEST DATA

United States Navy, UV test analysis program

NAVY MIL-STD-2218-1992 THERMAL DESIGN, ANALYSIS, AND TEST PROCEDURES FOR AIRBORNE ELECTRONIC EQUIPMENT

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, UV test analysis program

JEDEC JEP147-2003 Procedure for Measuring Input Capacitance Using a Vector Network Analyzer (VNA)

Institute of Electrical and Electronics Engineers (IEEE), UV test analysis program

IEEE Unapproved Draft Std P115/D3, Aug 2009 "IEEE Draft Guide for Test Procedures for Synchronous Machines Part I - Acceptance and Performance Testing --Part II - Test Procedures and Parameter Determination for Dynamic Analysis"
IEEE Unapproved Draft Std P115/D2, Jun 2009 IEEE Draft Guide for Test Procedures for Synchronous Machines Part I - Acceptance and Performance Testing; Part II - Test Procedures and Parameter Determination for Dynamic Analysis
IEEE Std 115-2009 IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis
IEEE 2003.2-1996 Standard for Information Technology - Test Methods for Measuring Conformance to POSIX - Part 2: Shell and Utilities Interfaces IEEE Computer Society Document
IEEE Std 115-2019 IEEE Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis
IEEE Std 2003.2-1996 IEEE Standard for Information Technology -Test Methods for Measuring Conformance to POSIX(TM) - Part II: Shell and Utilities
IEEE P115/D3, November 2019 IEEE Draft Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis
IEEE P115/D4, July 2019 IEEE Draft Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis
IEEE P115/D5, September 2019 IEEE Approved Draft Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis
P115/D5, September 2019 IEEE Approved Draft Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis

GM North America, UV test analysis program

GMP.PP.107-2011 Polypropylene ?High Impact Copolymer, UV Stable, ISO Tests Issue 2; Do Not Use on New Programs; Replaced by GMW16208

American Society for Testing and Materials (ASTM), UV test analysis program

ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D5785-95(2013) Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
ASTM E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

American National Standards Institute （ANSI), UV test analysis program

ANSI/IEEE 115:2009 Guide for Test Procedures for Synchronous Machines - Part I - Acceptance and Performance Testing - Part II - Test Procedures and Parameter Determination for Dynamic Analysis
ANSI/ASHRAE 140 Addendum B-2020 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ANSI/ASHRAE 140c-2011 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), UV test analysis program

ASHRAE 140-2001 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140 ADD B-2020 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., UV test analysis program

ASHRAE 140-2014 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140 ADD A-2014 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140-2017 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140 ADD A-2006 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140 ADD A-2008 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140 ADD B-2007 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140 ERTA-2008 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs (Includes Access to Additional Content)
ASHRAE 140-2011 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs (Includes Access to Additional Content)
ASHRAE HI-02-18-4-2002 An Analytical Verification Procedure for Testing the Ability of Whole-Building Energy Simulation Programs to Model Space Conditioning Equipment at Typical Design Conditions

European Committee for Standardization (CEN), UV test analysis program

CEN/TR 15046:2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure

Association Francaise de Normalisation, UV test analysis program

NF C93-809*NF EN 61745:2018 End-face image analysis procedure for the calibration of optical fibre geometry test sets
NF EN ISO 20184-3:2021 Analyses de diagnostic moléculaire in vitro - Spécifications relatives aux processus préanalytiques pour les tissus congelés - Partie 3 : ADN extrait
NF EN IEC 62788-5-1:2020 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 5-1 : joints d'étanchéité périphériques - Méthodes d'essai suggérées pour l'utilisation des matériaux de joints d'étanchéité périphériques
NF EN IEC 61300-2-56:2020 Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-56 : essais - Résistance au vent des boîtiers installés
NF EN 61300-2-37:2016 Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-37 : essais - Courbure du câble pour les boîtiers pour fibres optiques
NF EN IEC 60794-1-215:2020 Câbles à fibres optiques - Partie 1-215 : spécification générique - Procédures fondamentales d'essais des câbles optiques - Méthodes d'essais d'environnement - Essai de résistance au gel en extérieur des câbles, méthode F15
NF C93-902-33:1998 Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-33 : tests. Assembly and dissassembly of closures.
NF E17-010-2:2000 Metrological means - Units for measuring liquids other than water - Part 2 : test methods, conditions and procedures.

European Committee for Electrotechnical Standardization（CENELEC）, UV test analysis program

EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets
EN IEC 61300-2-56:2020 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-56: Tests - Wind resistance of mounted housing
EN IEC 60794-1-215:2020 Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15

ES-UNE, UV test analysis program

UNE-EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE-EN IEC 61300-2-56:2020 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-56: Tests - Wind resistance of mounted housing (Endorsed by Asociación Española de Normalización in November of 2020.)
UNE-EN IEC 60794-1-215:2020 Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15 (Endorsed by Asociación Española de Normalización in October of 2020.)

German Institute for Standardization, UV test analysis program

DIN EN 61745:2018-06 End-face image analysis procedure for the calibration of optical fibre geometry test sets (IEC 61745:2017); German version EN 61745:2017
DIN 66135-1:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
DIN EN IEC 61300-2-56:2022-09 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-56: Tests - Wind resistance of mounted housing (IEC 61300-2-56:2020); German version EN IEC 61300-2-56:2020
DIN EN 301002-4:2002-11 Integrated Services Digital Network (ISDN) - Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro...
DIN EN 301002-6:2002-11 Integrated Services Digital Network (ISDN) - Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro...

RU-GOST R, UV test analysis program

GOST R 8.593-2002 State system for ensuring the uniformity of measurements. Infrared analysers of grain and forage. Verification procedure
GOST R 8.723-2010 State system for ensuring the uniformity of measurements. Radiometers of the extreme ultraviolet radiation for measurements of radiance with the high spatial distribution in the wavelength range from 10-30 nm. Verification procedure

Standard Association of Australia （SAA）, UV test analysis program

AS 2850:1986 Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct

Danish Standards Foundation, UV test analysis program

DS/IEC/TR 60493-2:2010 Guide for the statistical analysis of ageing test data - Part 2: Validation of procedures for statistical analysis of censored normally distributed data
DS/EN 61300-3-1:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination

Society of Automotive Engineers (SAE), UV test analysis program

SAE AIR5917-2020 Procedure for Measurement of Gaseous Emissions from Aircraft Gas Turbine Engines Using Fourier Transform Infrared Analysis
SAE J3078/3-2022 Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 3: Operator Enclosure Pressurization System Test Procedure

International Organization for Standardization (ISO), UV test analysis program

ISO 17123-1:2002 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory

Japanese Industrial Standards Committee (JISC), UV test analysis program

JIS B 7912-1:2014 Optics and optical instruments.Field procedures for testing geodetic and surveying instruments.Part 1: Theory

Korean Agency for Technology and Standards (KATS), UV test analysis program

KS C IEC 61745-2001(2021) End－face image analysis procedure for the calibration of optical fibre geometry test setsthe calibration of optical fibre geometry test sets
KS C IEC 61745-2001(2016) End－face image analysis procedure for the calibration of optical fibre geometry test setsthe calibration of optical fibre geometry test sets

(U.S.) Telecommunications Industries Association , UV test analysis program

TIA/EIA-455-225-2002 FOTP-225 IEC-61745 End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets
TIA-455-225-2015 FOTP-225 IEC-61745 End-Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets

(U.S.) Ford Automotive Standards, UV test analysis program

FORD FLTM BB 114-02-2013 PROCEDURE FOR SEMI-GUIDED WRAP BEND FIXTURE FOR TESTING AND ANALYSIS OF THE BENDABILITY OF ALUMINUM SHEET
FORD FLTM BB 114-02-2014 PROCEDURE FOR SEMI-GUIDED WRAP BEND FIXTURE FOR TESTING AND ANALYSIS OF THE BENDABILITY OF ALUMINUM SHEET
FORD FLTM BB 114-1-2002 PROCEDURE FOR SEMI-GUIDED WRAP BEND FIXTURE FOR TESTING AND ANALYSIS OF THE BENDABILITY OF ALUMINUM SHEET

API - American Petroleum Institute, UV test analysis program

API REPORT 81-33-1982 Effects of Fire Environment on Pressure Capability of Standard API and ANSI Connections Testing and Revised Analytical Procedure

AENOR, UV test analysis program

UNE-EN 61300-3-1:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-1: Examinations and measurements - Visual examination

WRC - Welding Research Council, UV test analysis program

BULLETIN 508-2006 OPTIMIZED/HARMONIZED ROOM TEMPERATURE LEAKAGE TEST PROCEDURE FOR GENERATION OF ASME & CEN CODE GASKET FACTORS – ANALYTICAL PHASE

Lithuanian Standards Office , UV test analysis program

LST EN IEC 60794-1-215:2020 Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15 (IEC 60794-1-215:2020)

PL-PKN, UV test analysis program

PN-EN IEC 60794-1-215-2021-03 E Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15 (IEC 60794-1-215:2020)