ZH
RU
ES

channel verification device

channel verification device, Total:260 items.

In the international standard classification, channel verification device involves: Materials and components for railway engineering, Screw threads, Standardization. General rules, Installations in buildings, Nuclear energy engineering, Rails and railway components, Road engineering, Transport, Electric traction equipment, Electrical engineering in general, Electrical and electronic testing, Applications of information technology, Railway engineering in general, Construction of railways, Ergonomics, Protection against electric shock, Lifting equipment, Test conditions and procedures in general, Vibrations, shock and vibration measurements, Railway rolling stock, Electrical accessories, Switchgear and controlgear, Geology. Meteorology. Hydrology, Cableway equipment, Surface treatment and coating, Electromechanical components for electronic and telecommunications equipment, Domestic, commercial and industrial heating appliances, Construction equipment, Air quality, Diagnostic, maintenance and test equipment, Farm buildings, structures and installations, Occupational safety. Industrial hygiene, Mining equipment, Resistors, Radiation protection, Electromagnetic compatibility (EMC), Law. Administration, Character sets and information coding, Measurement of volume, mass, density, viscosity, Road vehicles in general, Electrical equipment for working in special conditions, Acoustics and acoustic measurements, Telecommunication systems, Welding, brazing and soldering, Protective equipment, Electricity. Magnetism. Electrical and magnetic measurements, Testing of metals, Linear and angular measurements, Rubber and plastics products, IT terminal and other peripheral equipment, Road vehicle systems, Radiation measurements, Mobile services, Metrology and measurement in general, Shipbuilding and marine structures in general, Analytical chemistry.

Association Francaise de Normalisation, channel verification device

NF F00-017:1992 General railway equipment. Round screw threads. Verification.
NF F50-003:1990 Railway fixed equipment. Sleeper screws for flat-bottom rails.
NF F00-125-2*NF EN 50125-2:2003 Railway applications - Environmental conditions for equipment - Part 2 : fixed electrical installations.
NF F01-373:2000 Railway applications - Rolling stock equipment - Shock and vibration tests.
NF F70-030:2004 Railway applications - Fixed installations - Safety electromechanical relais - Engineering and designing rules.
NF P98-590:2020 Temporary road traffic signs - Portable traffic control equipment for controlling alternate/shuttle working lanes - Performances, technical specifications
NF P98-728-1:2013 Road construction and maintenance equipment - Hot mix asphalt production facilities - Definition of constituent equipment and characteristics, verification of initial settings - Part 1 : bituminous mixture continuous mode production facilities
NF P98-728-2:2013 Road construction and maintenance equipment - Hot mix asphalt production facilities - Definition of constituent equipment and characteristics, verification of initial settings - Part 2 : bituminous mixture discontinuous mode production facilities
P98-586:1994 Road equipment. Permanent means of guiding. Traffic marker sticks : characteristics, specifications.
NF P98-728-2:2004 Road construction and maintenance equipment - Hot-setting hydrocarbon materials production plants - Definition of the components, of the levels and verification of the initial settings - Part 2 : discontinuous (batch) bituminous mixing plants.
NF P98-728-1:2004 Road construction and maintenance equipment - Hot-setting hydrocarbon materials production plants - Definition of the components, of the levels and verification of the initial settings - Part 1 : continuous bituminous mixing plants.
NF P98-580:1991 Raod equipment. Permanent means of guiding traffic. Delineators : characteristics, performances, tests.
NF P93-352:2016 Building site equipement - Single access rolling work platform - Specifications, testing and inspection
NF U57-063:1991 Greenhouses and greenhouse equipment. Stability requirements for the construction of tunnel greenhouses covered with plastic sheet.
NF F50-050-6*NF EN 13146-6:2012 Railway applications - Track - Test methods for fastening systems - Part 6 : effect of severe environmental conditions
NF P98-589:1993 Road equipment. Permanent signing of traffic. Characteristics, performances and testing for plastic milestones.
NF P98-722:1992 Road construction and maintenance equipment. Continuous batching equipment for products in powder form. Test bench and method of flow rate measurement.
NF F50-050-1:2015 Railway applications - Track - Test methods for fastening systems - Part 1 : determination of longitudinal rail restraint
NF F50-050-1/IN1:2015 Railway applications - Track - Test methods for fastening systems - Part 1 : determination of longitudinal rail restraint
NF F01-322*NF EN 60322:2001 Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction
NF F50-050-9:2011 Railway applications - Track - Test method for fastening systems - Part 9 : determination of stiffness.
NF F50-050-9/IN1*NF EN 13146-9/IN1:2011 Railway applications - Track - Test methods for fastening systems - Part 9 : determination of stiffness
NF C93-430-7*NF EN IEC 60603-7:2020 Connectors for electronic equipment - Part 7 : detail specification for 8-way, unshielded, free and fixed connectors
NF C93-430-7*NF EN 60603-7:2010 Connectors for electronic equipment - Part 7 : detail specification for 8-way, unshielded, free and fixed connectors
NF P98-587:1993 Road equipment. Permanent signing of traffic. Characteristics, performances and testing for plastic monolithic marker posts.
NF P98-592/IN1:2009 Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders.
NF A88-941:2005 Welding and allied processes - Qualification test of welders for safety joints on fuel gas distribution pipework - Joining of fuel gaz pipework in fuel gas plants located downstream of the general cut-off device.
NF F10-020*NF EN 15020+A1:2011 Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods
NF EN 419251-2:2013 Profils de protection pour dispositif d'authentification - Partie 2 : dispositif avec import de clé, génération de clé et administration - Communication sécurisée vers l'application de génération de certificats et l'application d'administra...
NF F41-020-7-3*NF EN 50123-7-3:2004 Railway applications - Fixed installations - D.C. switchgear - Part 7-3 : measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices.
NF F41-020-7-2*NF EN 50123-7-2:2004 Railway applications - Fixed installations - D.C. switchgear - Part 7-2 : measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices
NF P98-588:1996 Road equipment. Permanent means of guiding traffic. Plastic guide vane devices for signalling for signalling divergent roads : characteristics and specifications.
NF EN ISO 14253-2:2011 Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 2 : lignes directrices pour l'estimation de l'incertitude dans les mesures GPS, dans l'étalonnage des équipements de m...
NF E10-201-1*NF EN ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications
NF C99-106:2013 Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz)
NF E10-201-5*NF EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 : uncertainty in verification testing of indicating measuring instruments
NF C93-430-7-51*NF EN 60603-7-51:2010 Connectors for electronic equipment - Part 7-51 : detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz
NF C93-430-7-4*NF EN 60603-7-4:2010 Connectors for electronic equipment - Part 7-4 : detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
NF C93-430-7-3*NF EN 60603-7-3:2010 Connectors for electronic equipment - Part 7-3 : detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz
NF F65-377-2:2003 Railway applications - Rolling stock - Combined testing - Part 2 : chopper-fed direct current traction motors and their control.
NF E10-201-1:2013 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: decision rules for proving conformity or nonconformity with specifications
NF C93-430-7-2*NF EN 60603-7-2:2011 Connectors for electronic equipment - Part 7-2 : detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
NF C93-430-7-41*NF EN 60603-7-41:2010 Connectors for electronic equipment - Part 7-41 : detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz
NF U57-064:1991 Greenhouses and greenhouse equipment. Stability requirements for the construction of single or multispan or double tunnel greenhouses covered with flexible or cold berdable plastic sheet.
NF EN ISO 14253-1:2017 Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 1 : règles de décision pour contrôler la conformité ou la non-conformité à la spécification

Taiwan Provincial Standard of the People's Republic of China, channel verification device

CNS 14166-1998 General rules for qualification of nuclear safety grade electrical equipment
CNS 14372-1999 General rules for seismic qualification of nuclear safty grade electrical equipment
CNS 14240-1998 General rules for design qualification of safety systems equipment used in nuclear power generating stations

VN-TCVN, channel verification device

TCVN 7228-2002 Road vehicles.Braking devices of passenger cars.Requirements and test methods in type approval
TCVN 6919-2001 Road vehicles.Braking devices of power-driven vehicles, trailers.Requirements and test methods in type approval
TCVN 6956-2001 Road vehicles.Speedometer equipment installed in motor vehicles.Requirements and test methods in types approval
TCVN 7467-2005 Road vehicles.Vehicles fitted with specific equipment for the use of liquefied petroleum gases in their propulsion system.Requirements in type approval
TCVN 7000-2002 Road vehicles.Electromagnetic compatibility of motorcycles and mopeds and electrical or electronic separate technical units.Requirements and test methods in type approval
TCVN 6998-2002 Road vehicles.The maximum design speed, maximum torque and maximum net engine power of two or three-wheel motorcycles and mopeds.Test methods in type approval

American Society of Civil Engineers (ASCE), channel verification device

ASCE 35-01-2002 Guidelines for Quality Assurance of Installed Fine-Pore Aeration Equipment

German Institute for Standardization, channel verification device

DIN 11868-2:2016-03 Sampling equipments on milk collecting tankers - Part 2: Type verification
DIN 11868-3:2016-03 Sampling equipments on milk collecting tankers - Part 3: Minimum requirements for inspection authorities who carry out verifications or type verifications
DIN EN 61373:1999 Railway applications - Rolling stock equipment - Shock and vibration tests (IEC 61373:1999); German version EN 61373:1999
DIN EN 419251-2:2013-06 Security requirements for device for authentication - Part 2: Protection profile for extension for trusted channel to certificate generation application; German version EN 419251-2:2013
DIN EN 13146-8:2012 Railway applications - Track - Test methods for fastening systems - Part 8: In service testing; German version EN 13146-8:2012
DIN EN 1808:2015 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests; German version EN 1808:2015
DIN EN 13146-4:2012 Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading; German version EN 13146-4:2012
DIN EN 1808:2010 Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - Tests; German version EN 1808:1999+A1:2010
DIN 21631:2011 Air regulating systems for mining - Wing air doors for travelling tracks - One-wing type air doors without pressure reduction
DIN EN 419211-4:2014-03 Protection profiles for secure signature creation device - Part 4: Extension for device with key generation and trusted channel to certificate generation application; German version EN 419211-4:2013
DIN EN 13146-8:2007 Railway applications - Track - Test methods for fastening systems - Part 8: In service testing(includes Amendment A1:2006); English version of DIN EN 13146-8:2007-06
DIN EN 13146-4:2007 Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading(includes Amendment A1:2006) English version of DIN EN 13146-4:2007-06
DIN EN 1793-3:1997 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalised traffic noise spectrum; German version EN 1793-3:1997
DIN EN 15020:2007 Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods; English version of DIN EN 15020:2007-02
DIN EN 61373:2011 Railway applications - Rolling stock equipment - Shock and vibration tests (IEC 61373:2010); German version EN 61373:2010
DIN EN 13146-4:2015 Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading; German version EN 13146-4:2012+A1:2014
DIN EN 50123-7-2:2003 Railway applications - Fixed installations; D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems; Isolating current transducers and other current measuring devices; German version EN 50123-7-2:2
DIN EN 50123-7-3:2003 Railway applications - Fixed installations; D.C. switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems; Isolating voltage transducers and other voltage measuring devices; German version EN 50123-7-3:2
DIN 50157-2:2020 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
DIN EN ISO 14253-2:2018 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
DIN EN 61377-2:2003 Railway applications - Rolling stock; Combined testing - Part 2: Chopper-fed direct current traction motors and their control (IEC 61377-2:2002); German version EN 61377-2:2002
DIN EN 17128:2021 Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use - Personal light electric vehicles (PLEV) - Requirements and test methods; German version EN 17128:2020
DIN EN ISO 14253-1:2018-07 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017); German version EN ISO 14253-1:2017
DIN EN 60322:2002 Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction (IEC 60322:2001); German version EN 60322:2001
DIN 50158-2:2008-04 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 2: Verification and calibration of the testing devices
DIN EN ISO 14253-1:2018 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
DIN EN 15020:2011 Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods; German version EN 15020:2006+A1:2010

AENOR, channel verification device

UNE-EN 61032:1998 PROTECTION OF PERSONS AND EQUIPEMENT BY ENCLOSURES. PROBES FOR VERIFICATION.
UNE 199031-2:2011 Road traffic management equipment. Data capture stations. Test and proof methods. Part 2: Electromagnetic compatibility
UNE-EN 50566:2013 Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz)
UNE 20890/1M:1999 A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR.
UNE 20890:1995 A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR.
UNE 199031-4-2:2011 Road marking equipment. Data capture stations. Test and proof methods. Part 4-2: Test methods. Speed x Length traffic data matrix
UNE 135203-1:2010 Road signalisation equipment. Horizontal signalisation. Materials. Laboratory abrasion tests. Part 1: Determination of the abrasion resistance by Taber method.
UNE 199121-1:2013 Road traffic management equipment. Stationary cinemometers. Part 1: Specifications of grounded universal lateral cabinets for fixed installations
UNE-EN ISO 14253-2:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
UNE 135203-2:2010 Road signalisation equipment. Horizontal signalisation. Materials. Laboratory abrasion tests. Part 2: Determination of the abrasion resistance by falling abrasive method.

Standard Association of Australia （SAA）, channel verification device

AS IEC 61032:2023 Protection of persons and equipment by enclosures — Probes for verification
AS 60890:2009

British Standards Institution (BSI), channel verification device

BS EN 12966-2:2005 Road vertical signs - Variable message traffic signs - Initial type testing
BS EN 61032:1998 Protection of persons and equipment by enclosures. Probes for verification
BS PD CLC/TR 50542:2010 Railway applications — Communication means between safety equipment and man-machine interfaces (MMI)
BS DD CLC/TS 50562:2011 Railway applications. Fixed Installations. Process, measures and demonstration of safety for electric traction systems
BS EN 61373:1999 Railway applications. Rolling stock equipment. Shock and vibration tests
BS EN 61373:2010 Railway applications. Rolling stock equipment. Shock and vibration tests
BS ISO 21873-2:2019 Building construction machinery and equipment. Mobile crushers. Safety requirements and verification
BS EN 60603-7-1:2011 Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors
BS ISO 15031-4:2014 Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. External test equipment
21/30445372 DC BS EN ISO 12736-1. Petroleum and natural gas industries. Wet thermal insulation systems for pipelines and subsea equipment - Part 1. Validation of materials and insulation systems
BS EN ISO 12736-1:2023 Oil and gas industries including lower carbon energy. Wet thermal insulation systems for pipelines and subsea equipment. Validation of materials and insulation systems
BS EN 13231-5:2018 Railway applications. Track. Acceptance of works. Procedures for rail reprofiling in plain line, switches, crossings and expansion devices
BS ISO 6085:2023 Building construction machinery and equipment. Self-loading mobile concrete mixers. Safety requirements and verification
22/30438945 DC BS ISO 6085. Building construction machinery and equipment. Self-loading mobile concrete mixers. Safety requirements and verification
BS EN 13422:2004 Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders
BS EN 13422:2004+A1:2009 Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders
BS EN 13422:2019 Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders
BS EN 61377-2:2003 Railway applications - Rolling stock - Combined testing - Chopper-fed direct current traction motors and their control
BS EN 61377-2:2002 Railway applications - Rolling stock - Combined testing - Chopper-fed direct current traction motors and their control
BS EN 1793-4:2015 Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics In situ values of sound diffraction
BS EN ISO 14253-1:2013 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformity or nonconformity with specification
PD CEN/TR 17498:2020 Railway applications. Infrastructure. Rail mounted railway maintenance and inspection machines and associated equipment. Explanation of machine type and compliance, including acceptance processes
DD ENV ISO 14907-1:2001 Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Test procedures for user and fixed equipment. Description of test procedures
22/30419841 DC BS EN ISO 21177. Intelligent transport systems. ITS station security services for secure session establishment and authentication between trusted devices
BS EN ISO 21177:2023 Tracked Changes. Intelligent transport systems. ITS station security services for secure session establishment and authentication between trusted devices
PD IEC TR 61010-3-032:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-032:1994. Particular requirements for hand-held current clamps for electrical measurement and test
BS ISO 27145-4:2012 Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements. Connection between vehicle and test equipment
BS PD CEN/TS 16272-7:2015 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Extrinsic characteristics. In situ values of insertion loss
BS EN ISO 14253-1:2017 Tracked Changes. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for verifying conformity or nonconformity with specifications
BS ISO/IEC 27553-1:2022 Information security, cybersecurity and privacy protection. Security and privacy requirements for authentication using biometrics on mobile devices - Local modes
BS EN 16272-2:2012 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Intrinsic characteristics. Airborne sound insulation in the laboratory under diffuse sound field co

Professional Standard - Public Safety Standards, channel verification device

GA/T 995-2012 Technology specifications for video forensics devices for road traffic violation
GA/T 995-2020 Technical specifications for video evidence collection equipment for road traffic safety violations
GA/T 1755-2020 General technical requirements for face recognition application witness verification equipment for security protection

European Committee for Electrotechnical Standardization（CENELEC）, channel verification device

EN 61373:2010 Railway applications - Rolling stock equipment - Shock and vibration tests
EN 50566:2013 Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz)
EN 50125-2:2002 Railway applications - Environmental conditions for equipment Part 2: Fixed electrical installations (Incorporating corrigendum June 2010)
EN 50125-2:2002/AC:2010 Railway applications - Environmental conditions for equipment Part 2: Fixed electrical installations (Incorporating corrigendum June 2010)
EN 61377-2:2002 Railway applications Rolling stock Combined testing Part 2: Chopper-fed direct current traction motors and their control

CENELEC - European Committee for Electrotechnical Standardization, channel verification device

EN 61373:1999 Railway Applications - Rolling Stock Equipment - Shock and Vibration Tests

Group Standards of the People's Republic of China, channel verification device

T/SHSBJL 3-2020 Equipment supervision method - visual inspection of electrical installation of rail transit equipment
T/CAMET 04020.8-2021 Urban rail transit— Automatic fare collection system equipment and module requirements —Part 8:Ticket processing unit
T/CAMET 04012.2-2018 Urban rail transit—Test specification for interoperability of communication based train control system— Part 2: Test and verification of Intermittent Train Control part

RU-GOST R, channel verification device

GOST R 54809-2011 Traffic control devices. Road marking. Test methods
GOST R 54809-2011(2019) Traffic control devices. Road marking. Test methods
GOST R 55165-2012 Mining equipment. Rotary bucket quarry excavators. General technical requirements and test methods
GOST R 55166-2012 Mining equipment. Rotary bucket quarry excavators. General technical requirements and test methods
GOST R 55152-2012 Mining equipment. Mobile armoured face conveyors. General technical requirements and test methods
GOST EN 50293-2012 Electromagnetic compatibility of technical equipment. Road traffic signal systems. Requirements and test methods
GOST 30852.20-2002 Mininq electrical equipment. Insulation, leakage paths and electrical gaps. Technical reguirements and test methods
GOST 26532-1985 Data transmission system signal conversion modulus for unswitched voice-frequency channels. Types and basic parameters
GOST R EN 12841-2012 Occupational safety standards system. Personal protective equipment against falls from a height. Rope access systems. Rope adjustment devices. General technical requirements. Test methods
GOST 20855-1983 Data transimission system signal conversion modulus for switched and unswitched voice frequency channels. Types and basic parameters
GOST R 8.873-2014 State system for ensuring the uniformity of measurements. State verification schedule for provided with measuring functions technical systems and devices, accomplishing for measuring the volumes (amounts) of the digital information (data), transmitted ove
GOST R 57484-2017 Complex system of GLONASS unified on-board equipment. Technical means controlling circumstances of any harm inflicted to vehicle as a result of road traffic accident. General technical requirements and test methods

Military Standard of the People's Republic of China-General Armament Department, channel verification device

GJB 5014-2001 General specifications for unit test equipment for ballistic strategic missiles

Korean Agency for Technology and Standards (KATS), channel verification device

KS C IEC 61032:2019 Protection of persons and equipment by enclosures — Probes for verification
KS R 9181-2003 Test methods for commercial frequency track circuit type automatic train stop
KS B 8053-2015 Gas engine driven heat pump air conditioners－ducted gas engine driven heat pump air conditioners－Testing and rating for performance
KS R ISO 15031-4-2016(2021) Road vehicles－Communication between vehicle and external equipment for emissions－related diagnostics－Part 4：External test equipment
KS R ISO 15031-4:2016 Road vehicles－Communication between vehicle and external equipment for emissions－related diagnostics－Part 4：External test equipment
KS R ISO 15031-4:2006 Road vehicles-Communication between vehicle and external equipment for emissions-related diagnostics-Part 4:External test equipment
KS B ISO 14253-2:2020 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment —Part 2: Guidance for the estimation of uncertainty in GPS measurement,in calibration of measu
KS X ISO 17262:2016 Road traffic and transports telematics — Automatic vehicle and equipment identification — Inter modal goods transport numbering and data structures
KS V IEC 62065-2006(2016) Maritime navigation and radiocommunication equipment and systems－ Track control systems－Operational and performance requirements,methods of testing and required test results
KS X ISO 14907-1:2002 Road Transport and Traffic Telematics(RTTT)-Electronic Fee Collection(EFC)-Test proceduresfor user and fixed equipment-Part 1:Description of test procedures

Henan Provincial Standard of the People's Republic of China, channel verification device

DB41/T 851-2013 General Requirements for Electromechanical Special Equipment Inspection and Report (Certificate)
DB41/T 1841-2019 Specification for supervision and inspection of roadway stacking mechanical parking equipment

KR-KS, channel verification device

KS C IEC 61032-2019 Protection of persons and equipment by enclosures — Probes for verification
KS R ISO 15031-4-2016 Road vehicles－Communication between vehicle and external equipment for emissions－related diagnostics－Part 4：External test equipment
KS B ISO 14253-2-2020 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment —Part 2: Guidance for the estimation of uncertainty in GPS measurement,in calibration of measu
KS X ISO 17262-2016 Road traffic and transports telematics — Automatic vehicle and equipment identification — Inter modal goods transport numbering and data structures

ES-UNE, channel verification device

UNE-EN 61032 CORR:2003 Protection of persons and equipment by enclosures - Probes for verification.
UNE-EN 419251-2:2013 Security requirements for device for authentication - Part 2: Protection profile for extension for trusted channel to certificate generation application (Endorsed by AENOR in April of 2013.)
UNE-EN 419211-4:2016 Protection profiles for secure signature creation device - Part 4: Extension for device with key generation and trusted channel to certificate generation application
UNE 224001:2023 Solar thermal electric plants. Criteria for design, installation and performance verification of flexible pipe connectors in parabolic trough collector technology.
UNE-EN ISO 21177:2023 Intelligent transport systems - ITS station security services for secure session establishment and authentication between trusted devices (ISO 21177:2023) (Endorsed by Asociación Española de Normalización in June of 2023.)
UNE-EN ISO 14253-1:2019 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
UNE-CEN/TR 17498:2020 Railway applications - Infrastructure - Rail mounted railway maintenance and inspection machines and associated equipment - Explanation of machine type and compliance, including acceptance processes (Endorsed by Asociación Española de Normalización ...

Japanese Industrial Standards Committee (JISC), channel verification device

JIS C 0922:2002 Protection of persons and equipment by enclosures for electrical apparatus -- Probes for verification

ZA-SANS, channel verification device

SANS 51808:1999 Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests
SANS 60439-1:2004 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies
SANS 10343:2003 Verification of non-automatic electronic self-indicating road vehicle mass measuring equipment for use by road traffic authorities

Lithuanian Standards Office , channel verification device

LST EN 61032-2001 Protection of persons and equipment by enclosures. Probes for verification (IEC 61032:1997)
LST EN 13146-4-2012+A1-2015 Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading
LST EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
LST L ENV ISO 14253-2:2002 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 1425
LST EN ISO 14253-2:2011/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technic

国家能源局, channel verification device

NB/T 42101-2016 General Guidelines for Type Tests and Type Test Reports of High Voltage Switchgear

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, channel verification device

GB/T 28549-2012 Verification requirement of supports in nuclear island during unclear power plant commissioning
GB/T 21563-2008 Railway application.Rolling stock equipment.Shock and vibration tests
GB/T 21563-2018 Railway applications.Rolling stock equipment.Shock and vibration tests
GB/T 32749-2016 General specifications for equipment and instrument by hydrometric cableway measurements
GB/T 25118-2010 Railway applications.Electric equipment for rolling stock.Rules for power resistors of open construction
GB/T 28029.2-2020 Electronic railway equipment—Train communication network (TCN)—Part 2-1: Wire Train Bus（WTB）
GB/Z 30993-2014 Safety requirements for electrical equipment for measurement, control and laboratory use.Conformity verification report for GB 4793.1—2007
GB/T 28029.3-2020 Electronic railway equipment—Train communication network (TCN)—Part2-2: Wire Train Bus（WTB）conformance testing
GB 19518.1-2004 Electrical apparatus for explosive gas atmospheres Electrical resistance trace heating-Part 1:General and testing requirements

International Electrotechnical Commission (IEC), channel verification device

IEC 61373:1999 Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 61373:2010 Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 60439-1:2004 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
IEC 60439-1/AMD1/COR1:2004 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies; Corrigendum 1
IEC 60439-1:1999 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
IEC 61992-3:2001 Railway applications - Fixed installations; DC switchgear - Part 3: Indoor disconnectors and switch disconnectors
IEC 60322:2001 Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction
IEC 60439-1/AMD1:2004 Amendment 1 - Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
IEC 62236-5:2003 Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
IEC 62236-5:2008 Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
IEC 61377-2:2002 Railway applications - Rolling stock; Combined testing - Part 2: Chopper-fed direct current traction motors and their control
IEC TR 61010-3-031:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-031: Conformity verification report for IEC 61010-031:2002; Safety requirements for hand-held probe assemblies for electrical test and measurement
IEC TR 61010-3-032:2000 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-032: Conformity verification report for IEC 61010-2-032:1994 - Particular requirements for hand-held current clamps for electrical measurement and test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, channel verification device

GB/T 24276-2017 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation

Danish Standards Foundation, channel verification device

DS/EN 419251-2:2013 Security requirements for device for authentication - Part 2: Protection profile for extension for trusted channel to certificate generation application
DS/EN 50566:2013 Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz)
DS/EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
DS/EN ISO 14253-2/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
DS/EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification

CEN - European Committee for Standardization, channel verification device

PREN 16248-2-2011 Security requirements for device for authentication - Part 2: Protection profile for extension for trusted channel to certificate generation application
PREN 13231-2-2019 Railway applications - Track - Acceptance of works - Part 2: Acceptance of reprofiling rails in plain line@ switches@ crossings and expansion devices

GOSTR, channel verification device

GOST R 58341.3-2019 Form of passport, certificate of production, certificate of equipment installation and pipelines, the form of the certificate of installation of localizing safety systems, elements of localizing safety systems of nuclear power plant. The structure and con

Professional Standard - Water Conservancy, channel verification device

SL/T 244-1999 General specifications for equipment and instrument of hydrometric cableway measurements

International Organization for Standardization (ISO), channel verification device

ISO/FDIS 12736-1 Petroleum and natural gas industries — Wet thermal insulation systems for pipelines and subsea equipment — Part 1: Validation of materials and insulation systems
ISO 21873-2:2019 Building construction machinery and equipment — Mobile crushers — Part 2: Safety requirements and verification
ISO 6085:2023 Building construction machinery and equipment — Self-loading mobile concrete mixers — Safety requirements and verification
ISO 15031-4:2005 Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 4: External test equipment (Second Edition)
ISO/IEC 18745-2:2021 Test methods for machine readable travel documents (MRTD) and associated devices — Part 2: Test methods for the contactless interface
ISO 12736-1:2023 Oil and gas industries including lower carbon energy — Wet thermal insulation systems for pipelines and subsea equipment — Part 1: Validation of materials and insulation systems
ISO 6085:2023/AWI Amd 1:2023 Building construction machinery and equipment — Self-loading mobile concrete mixers — Safety requirements and verification — Amendment 1
ISO 6085:2023/CD Amd 1:2022 Building construction machinery and equipment — Self-loading mobile concrete mixers — Safety requirements and verification — Amendment 1
ISO/AWI 21177:2023 Intelligent transport systems — ITS station security services for secure session establishment and authentication between trusted devices
ISO/DIS 21177:2023 Intelligent transport systems — ITS station security services for secure session establishment and authentication between trusted devices
ISO/TS 14907-2:2006 Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface
ISO 27145-6:2015 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 6: External test equipment
ISO/PAS 27145-4:2006 Road vehicles - Implementation of WWH-OBD communication requirements - Part 4: Connection between vehicle and test equipment
ISO/TS 14907-1:2005 Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures

Professional Standard - Railway, channel verification device

TB/T 1393-2003 Railway applications-Electric equipment for Rolling stock-Rules for power resistors of open construction

Institute of Electrical and Electronics Engineers (IEEE), channel verification device

IEEE Std C136.10-1996 Roadway lighting equipment - Locking-type photocontrol devices and mating receptacle physical and electrical interchangeability and testing
IEEE 1671.6-2008 Trial-use standard for automatic test markup language (ATML) for exchanging automatic test equipment and test information via XML: Exchanging test station information
IEEE 1671.1-2009 Trial-Use Standard for Automatic Test Markup Language (ATML) for exchanging automatic test equipment and test information via XML: Exchanging test descriptions
IEEE 1671.2-2008 Trial-use standard for automatic test markup language (ATML) for exchanging automatic test equipment and test information via XML: Exchanging instrument descriptions

European Committee for Standardization (CEN), channel verification device

EN 13422:2004+A1:2009 Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders
prEN ISO 12736-1 Petroleum and natural gas industries - Wet thermal insulation systems for pipelines and subsea equipment - Part 1: Validation of materials and insulation systems (ISO/DIS 12736-1:2021)
EN 419211-4:2013 Protection profiles for secure signature creation device - Part 4: Extension for device with key generation and trusted channel to certificate generation application
EN ISO 12736-1:2023 Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 1: Validation of materials and insulation systems (ISO 12736-1:2023)
CEN ISO/TS 14907-2:2006 Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface ISO/TS 14907-2:2006
prEN 16803-4 Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 4 : Definitions and system engineering procedures for the design and validation of test scenarios

National Association of Pipe Fabricators (NAPF), channel verification device

PFI ES-42-2005 STANDARD FOR POSITIVE MATERIAL IDENTIFICATION OF PIPING COMPONENTS USING PORTABLE X-RAY EMISSION TYPE TEST EQUIPMENT

IT-UNI, channel verification device

UNI 7496-1975 Nuclear plants. Efficiency testing of particulate filters in ventilation ducts.

ETSI - European Telecommunications Standards Institute, channel verification device

PRETS 300 331-1993 Radio equipment and Systems (RES); Digital European Cordless Telecommunication (DECT) Common Interface DECT Authentication Module
TR 137 977-2017 Universal Mobile Telecommunications System (UMTS); LTE; Universal Terrestrial Radio Access (UTRA) and Evolved Universal Terrestrial Radio Access (E-UTRA); Verification of radiated multi-antenna reception performance of User Equipment (UE) (V14.3.0; 3GPP T
TR 137 977-2018 Universal Mobile Telecommunications System (UMTS); LTE; Universal Terrestrial Radio Access (UTRA) and Evolved Universal Terrestrial Radio Access (E-UTRA); Verification of radiated multi-antenna reception performance of User Equipment (UE) (V15.0.0; 3GPP T
TR 137 977-2014 Universal Mobile Telecommunications System (UMTS); LTE; Universal Terrestrial Radio Access (UTRA) and Evolved Universal Terrestrial Radio Access (E-UTRA); Verification of radiated multi-antenna reception performance of User Equipment (UE) (V12.1.0; 3GPP T
TR 137 977-2016 Universal Mobile Telecommunications System (UMTS); LTE; Universal Terrestrial Radio Access (UTRA) and Evolved Universal Terrestrial Radio Access (E-UTRA); Verification of radiated multi-antenna reception performance of User Equipment (UE) (V13.2.0; 3GPP T

Beijing Provincial Standard of the People's Republic of China, channel verification device

DB11/T 311.2-2008 Quality Acceptance Standards for Urban Rail Transit Engineering Part 2: Equipment Installation Engineering

未注明发布机构, channel verification device

BS 1610-1:1992(1999) Materials testing machines and force verification equipment — Part 1 : Specification for the grading of the forces applied by materials testing machines whenused inthe compression mode
BS EN 874:1995(1999) Gas welding equipment — Oxygen / fuel gas blowpipes (cutting machine type) of cylindrical barrel — Type of construction, general specifications, test methods

YU-JUS, channel verification device

JUS N.K5.020-1979 Low-voltage controlgear. Contactors. Conventional test circuits for the verification of rated making and breaking capacities

Shaanxi Provincial Standard of the People's Republic of China, channel verification device

DB61/T 1031-2016 Code for Quality Acceptance of Urban Rail Transit Engineering Part 4: Installation of Civil Air Defense Equipment
DB61/T 1030-2016 Quality Acceptance Specifications for Urban Rail Transit Engineering Part 3: Installation of Non-standard Equipment in Vehicle Bases

Society of Automotive Engineers (SAE), channel verification device

SAE ARINC812AP2-2014 STANDARD DATA INTERFACES FOR GALLEY INSERT (GAIN) EQUIPMENT PART 2 CAN COMMUNICATIONS, VERIFICATION, AND SYSTEM TEST GUIDANCE

European Telecommunications Standards Institute (ETSI), channel verification device

ETSI PRETS 300 760-1997 Radio Equipment and Systems (RES); Digital Enhanced Cordless Telecommunications (DECT); DECT Authentication Module (DAM); Implementation Conformance Statement (ICS) Proforma Specification
ETSI PRETS 300 760-1996 Radio Equipment and Systems (RES); Digital Enhanced Cordless Telecommunications (DECT); DECT Authentication Module (DAM); Implementation Conformance Statement (ICS) Proforma Specification
ETSI TR 137 977-2016 Universal Mobile Telecommunications System (UMTS); LTE; Universal Terrestrial Radio Access (UTRA) and Evolved Universal Terrestrial Radio Access (E-UTRA); Verification of radiated multi-antenna reception performance of User Equipment (UE) (V13.3.0; 3GPP T

AT-ON, channel verification device

OENORM EN ISO 14253-2:2021 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425

Professional Standard - Post and Telecommunication, channel verification device

YD 5052-1998 Temporary technical regulation for acceptance of postal equipment installation project volume 4 apron conveyer

International Telecommunication Union (ITU), channel verification device

ITU-T SERIES L SUPP 11-2014 ITU-T L.1300 – Supplement on a verification test and feasibility study of energy and space efficient cooling systems for data centres with high density ICT devices (Study Group 5)