ZH
RU
ES
Pipeline pressure detection
Pipeline pressure detection, Total:499 items.
In the international standard classification, Pipeline pressure detection involves: Pipeline components and pipelines, Protection against excessive pressure, Burners. Boilers, Petroleum, petroleum products and natural gas handling equipment, Installations in buildings, Fluid storage devices, Shipbuilding and marine structures in general, Non-destructive testing, Vocabularies, Applications of information technology, Iron and steel products, Construction materials, External water conveyance systems, External sewage systems, Valves, Industrial furnaces, FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE, Fluid power systems, Rubber and plastics products, Manufacturing forming processes, Testing of metals, Industrial automation systems, Adhesives, Welding, brazing and soldering, Nuclear energy engineering, Structures of buildings, Hydraulic construction, Energy and heat transfer engineering in general, Equipment for the chemical industry, Glass, Bridge construction.
Professional Standard - Petroleum, Pipeline pressure detection
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Pipeline pressure detection
PT-IPQ, Pipeline pressure detection
Professional Standard - Special Equipment Specification, Pipeline pressure detection
- TSG D7005-2018 Rules for Periodic Inspection of Pressure Pipes-Industrial Pipelines
- TSG D7004-2010 Rules for Periodic Inspection of Pressure Pipelines-Public Pipelines
- TSG D7003-2010 Rules for Periodic Inspection of Pressure Pipelines - Long Distance Pipelines
- TSG D7006-2020 Pressure pipeline supervision and inspection rules
- TSG D7001-2013 Pressure Piping Components Manufacture Supervision Inspection Regulation
- TSG D0001-2009 Pressure pipe safety technology supervision regulation for industrial pressure pipe
- TSG D5001-2009 Pressure Pipe Service Registration Administration Regulation
- TSG R1001-2008 Design Appraisal Regulations for Pressure Vessel & Pressure Pipe
- TSG D3001-2009 Pressure pipe installation licensing regulation
- TSG D7001-2005 Pressure Pipe Unit Manufacture Supervision Inspection Regulation (Submerged-arc Welding Steel Pipe and Polyethylene Pipe)
- TSG D2001-2006 Pressure Piping Components Manufacture Appraisal Regulation
- TSG D7002-2006 Pressure Piping Components Type Test Regulation
BE-NBN, Pipeline pressure detection
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pipeline pressure detection
Standard Association of Australia （SAA）, Pipeline pressure detection
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Pipeline pressure detection
- GB/T 34275-2017 Pressure piping code—Long-distance pipeline
- GB/T 34349-2017 External inspection methodology for internal corrosion of natural gas pipelines
- GB/T 34350-2017 External inspection methodology for internal corrosion of liquid petroleum pipelines
- GB/T 35990-2018 Metal bellows expansion joints for pressure piping
CN-STDBOOK, Pipeline pressure detection
- 图书 3-9932 Pressure Piping Code for Industrial Piping
- 图书 3-9809 Interpretation of TSG D7006-2020 "Pressure Pipeline Supervision and Inspection Rules"
国家市场监督管理总局、中国国家标准化管理委员会, Pipeline pressure detection
- GB/T 38942-2020 Pressure piping code—Utility piping
- GB/T 20801.5-2020 Pressure piping code—Industrial piping—Part 5:Inspection and testing
- GB/T 20801.2-2020 Pressure piping code—Industrial piping—Part 2:Materials
- GB/T 20801.6-2020 Pressure piping code—Industrial piping—Part 6:Safeguarding
- GB/T 20801.4-2020 Pressure piping code—Industrial piping—Part 4:Fabrication and assembly
- GB/T 20801.3-2020 Pressure pipng code—Industrial piping—Part 3:Design and calculation
- GB/T 35090-2018 Non-destructive testing—Test method for weak magnetic testing of pipeline
- GB/T 36676-2018 External inspection methodology of stress corrosion cracking (SCC) for buried steel pipelines
HU-MSZT, Pipeline pressure detection
American National Standards Institute （ANSI), Pipeline pressure detection
- ANSI/ASME PCC-2-2011 Repair of Pressure Equipment and Piping
- ANSI/ASTM F2807:2013 Specification for Multuilayer Polyethylene-Polymide (PE-PA) Pipe for Pressure Piping Applications
- ANSI/ASTM F2818:2010 Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
- ANSI/ASTM D2513:2013 Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
- ANSI/ASME B31G-2012 Manual for Determining the Remaining Strength of Corroded Pipelines: A Supplement to B31, Code for Pressure Piping
- ANSI/ASTM D1599:1999 Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
CZ-CSN, Pipeline pressure detection
Group Standards of the People's Republic of China, Pipeline pressure detection
- T/CASEI 009-2022 Guidelines for supervision and inspection of pressure pipeline construction —Utility pipeline
- T/CASEI 008-2022 Guidelines for supervision and inspection of pressure pipeline construction—long-distance pipeline
- T/CASEI 007-2022 Guidelines for supervision and inspection of pressure pipeline construction—industrial pipeline
- T/NTAS 019-2023
- T/QGCML 900-2023 Pipeline inspection data management platform
- T/CASEI 010-2022 Guidelines for supervision and inspection of pressure pipeline component manufacture
- T/ZJBX 11-2022 Guide for periodic inspection of in-service chlorinated polyvinyl chloride pressure pipes
- T/SXHJ 0006-2022 Welding Inspection Report Drawing Method with Drawings Part 2 Pressure Piping
- T/CASEI 021-2023 Test and evaluation for In-line inspection tool of oil & gas pipeline— Part 2: Magnetic flux leakage detector
- T/ZZB 3084-2023 Robot for pipeline closed circuit television inspection
- T/GDC 65-2022 Cross helically wound steel fibers reinforced-polyethylene composite pipelines
- T/GDC 65-2023 Cross helically wound steel fibers reinforced-polyethylene composite pipelines
Jiangxi Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB36/ 789-2014 Ultrasonic guided wave testing method for steel pressure pipelines
- DB36/T 789-2023 Ultrasonic guided wave detection method for steel pressure pipelines
PL-PKN, Pipeline pressure detection
- PN C89017-1992 Plastics pipes. Determination of the resistance to internal pressure
- PN H02650-1989 Valves and pipes Pressures and temperatures
- PN H74140-1969 Cast iron f?ttings for asbestos cement pressure pipes lines
- PN S47033-1990 Road vehicles Elastic hoses for hydraulic brakesRe?uirements and tests
FI-SFS, Pipeline pressure detection
RO-ASRO, Pipeline pressure detection
- STAS SR ISO 3459:1995 Polyethylene (PE) pressure pipes - Joints assembled with mechanical fittings -Internal under-pressure test method and requirement
- SR EN 804-1996 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistence to a short-term internal hydrostatic pressure
- STAS SR ISO 1167:1993 Plastics pipes for the transport of fluids. Determination of the resistence to internai pressure
- STAS 6718-1985 Tests of metals TENSILE TESTING OF TUBES
- STAS 2250-1973 Pipe components NOMINAL PRESSURES, TEST PRES- SURES AND MAXIMUM ADMISSI- BLE WORKING PRESSURES
- STAS SR EN 803-1996 Plastics pipirig systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure pipirig - Test method for resistence to a short-term internai pressure without end thrust
- STAS 1674-1974 Cast iron pressure pipes and fittings SOCKET TUBES FOR GAULKING JOINTING Dimensions
IT-UNI, Pipeline pressure detection
CH-SNV, Pipeline pressure detection
U.S. Military Regulations and Norms, Pipeline pressure detection
British Standards Institution (BSI), Pipeline pressure detection
- ASME B31.3-2022 Process Piping - ASME Code for Pressure Piping, B31
- BS ISO 4179:2005 Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining
- BS EN 1447:2009+A1:2010 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure
- ASME B31.5-2022 Refrigeration Piping and Heat Transfer Components - ASME Code for Pressure Piping, B31
- DD ENV 12108-2001 Plastics piping systems. Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption
- BS ISO 17885:2015 Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
- BS ISO 17885:2021 Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
- BS EN ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Preparation of pipe test pieces
- BS EN 13160-5:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
- ASME B31.8S-2022 Managing System Integrity of Gas Pipelines - ASME Code for Pressure Piping, B31. Supplement to ASME B31.8
- BS EN ISO 9311-3:2005 Adhesives for thermoplastic piping systems - Test method for the determination of resistance to internal pressure
- BS EN 12201-2:2011+A1:2013 Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Pipes
- 20/30385506 DC BS ISO 17885. Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
- BS EN 1447:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
- BS EN 802:1995 Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing
- 14/30297459 DC BS EN 15012. Plastics piping systems. Buried and above ground piping components for non pressure soil and waste discharge within the building structure. Requirements and test/assessment methods for pipes and fittings
- BS EN 804:1995 Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure
- BS ISO 9110-2:2020 Hydraulic fluid power. Measurement techniques - Measurement of average steady-state pressure in a closed conduit
- BS 9690-2:2011 Non-destructive testing. Guided wave testing. Basic requirements for guided wave testing of pipes, pipelines and structural tubulars
- BS EN 512:1995 Fibre-cement products - Pressure pipes and joints
- BS EN ISO 3503:2015 Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
- 14/30297456 DC BS EN 15013. Plastics piping systems. Non-pressure drainage and sewerage piping components buried in ground. Requirements and test/assessment methods for pipes and fittings
German Institute for Standardization, Pipeline pressure detection
- DIN 86001:2010-09 Pipelines on ships - Pressure ratings, pressure tests
- DIN 3266-2:1987 Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves; testing
- DIN EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
- DIN EN 12106:1997 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997
- DIN 86001:2010 Pipelines on ships - Pressure ratings, pressure tests
- DIN EN ISO 3458:2015-08 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015); German and English version EN ISO 3458:2015
- DIN 8076-1:1984 Thermoplastics pressure pipelines; metal compression fittings for polyethylene (PE) pipes; general quality requirements; testing
- DIN 53769-6:1989 Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure
- DIN 86001:1997 Pipelines on ships - Pressure ratings, tests
- DIN EN 804:1994 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994
- DIN EN 1447:2011-01 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure; German version EN 1447:2009+A1:2010
- DIN EN 13160-5:2016-12 Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems; German version EN 13160-5:2016
- DIN EN ISO 3503:2015-06 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
- DIN EN ISO 3459:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2015); German and English version EN ISO 3459:2015
- DIN EN 802:1994-09 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994
- DIN 73365-3:1970-01 Injection pumps for Diesel engines; pressure pipe connections
- DIN EN ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015); German and English version EN ISO 13845:2
- DIN 19806:1977 Cast iron special castings for asbestos cement pressure pipelines; branches
- DIN 2470-1:1987 Steel gas pipelines for permissible working pressures up to 16 bar; pipes and fittings
- DIN EN 803:1994 Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994
- DIN 19808:1977 Cast iron special castings for asbestos cement pressure pipelines; plugs
- DIN 16963-7:1989 Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; fittings for resistance welding; dimensions
- DIN EN 512/A1:2002-04 Fibre-cement products - Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001
- DIN EN 512:1994-11 Fibre-cement products - Pressure pipes and joints; German version EN 512:1994
- DIN EN 12295:1999 Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999
International Organization for Standardization (ISO), Pipeline pressure detection
- ISO/DIS 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
- ISO 4483:1979 Asbestos-cement pipelines; Field pressure testing
- ISO 4179:2005 Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining
- ISO/FDIS 4179:2023 Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
- ISO 4179:1985 Ductile iron pipes for pressure and non-pressure pipelines; Centrifugal cement mortar lining; General requirements
- ISO 17885:2015 Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
- ISO 17885:2021 Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
- ISO 15306:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure
- ISO 7186:1983 Ductile iron pipes and accessories for non-pressure pipe-lines
- ISO/CD 6366:2023 Non-destructive testing — Leak testing — Radioactive tracer methods for pressured vessels and underground pipelines
- ISO 7268:1983 Pipe components; Definition of nominal pressure
- ISO 2531:1979 Ductile iron pipes, fittings and accessories for pressure pipe-lines
- ISO 17885:2015/Amd 1:2016 Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications — Amendment 1
- ISO 15306:2003/Amd 1:2012 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure; Amendment 1
AT-ON, Pipeline pressure detection
- ONORM M 3036-1983 Eddy current testing of pipes as replacement for the pressure-tightness-test
- ONORM B 2523-1995 Scraper traps for pressure pipelines
- OENORM ISO 17885:2021 Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
- ONORM B 2520-1992 Construction of gas pipelines made of steel pipes - Requirements for pipes and pipeline elements for working pressures higher than 16 bar
- ONORM B 2520/A1-2000 Construction of gas pipelines made of steel pipes - Requirements for pipes and pipeline elements for working pressures higher than 16 bar
- ONORM B 2521-1995 Construction of gas pipelines made of steel pipes - Requirements for pipes and pipeline elements for working pressures exceeding 100 mbar up to 16 bar
- OENORM EN ISO 3459:2021 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leak tightness under negative pressure (ISO/DIS 3459:2021)
- ONORM B 2521/A1-2000 Construction of gas pipelines made of steel pipes - Requirements for pipes and pipeline elements for working pressures exceeding 100 mbar up to 16 bar
- ONORM B 5071-1995 Pipes, pressure pipes and fittings of reinforced concrete - Requirements, testing and quality control -Markina of conformitv
SE-SIS, Pipeline pressure detection
国家能源局, Pipeline pressure detection
- SY/T 6597-2018 Technical specifications for in-line inspection of oil and gas pipelines
- NB/T 20528-2018 Acoustic emission monitoring of leakage before pressure pipe break in pressurized water reactor nuclear power plant
US-FCR, Pipeline pressure detection
Indonesia Standards, Pipeline pressure detection
- SNI 07-3081-1992 Ductile cast iron pipes and accessories for non pressure pipe lines
- SNI 05-6324-2000 Colour coding of pressure pipes, air pipes and liquid pipes
- SNI 07-3083-1992 Ductile cast iron spigot and socket pipes for pressure pipe lines. Part 2
European Committee for Standardization (CEN), Pipeline pressure detection
- EN ISO 3458:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure
- EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
- EN ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection
- EN 804:1994 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
- EN 12106:1997 Plastics Piping Systems - Polyethylene (PE) Pipes - Test Method for the Resistance to Internal Pressure After Application of Squeeze-Off
- EN 803:1994 Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust
- EN 1053:1995 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
- EN 802:1994 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
- EN 714:1994 Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust
- EN ISO 3459:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
- prEN 803-1992 Plastics piping systems; injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping; test method for resistance to a short-term internal pressure without end thrust
- EN 1447:2009+A1:2010 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
- prEN ISO 3459:2021 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leak tightness under negative pressure (ISO/DIS 3459:2021)
- EN ISO 7751:2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
- prEN 512-1991 Fibre-cement products; pressure pipes and joints
IN-BIS, Pipeline pressure detection
ES-UNE, Pipeline pressure detection
- UNE-EN ISO 3458:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015)
- UNE-EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)
- UNE-EN 802:1995 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
- UNE-EN ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
BR-ABNT, Pipeline pressure detection
AWS - American Welding Society, Pipeline pressure detection
- PRGVT-1999 The Practical Reference Guide for Welding Inspection Management - Visual Inspection of Pressure Vessels and Pressure Piping
Hebei Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB13/T 2076-2014 Pressure pipeline safety performance evaluation method-industrial pipeline
- DB1304/T 438-2023 Guidelines for online comprehensive inspection of natural gas gate station pressure pipelines
- DB13/ 48-1991 Heat pipe insulation monitoring
未注明发布机构, Pipeline pressure detection
- BS EN 921:1995(1999)*BS 2782-11 MTD 1127A:1995 Plastics piping systems — Thermoplasticspipes — Determination of resistance to internal pressure at constant temperature
- BS EN 804:1995(1999) Plastics piping systems — Injection - moulded socket fittings for solvent - cementedjoints for pressure piping — Test method for resistance to a short - term internal hydrostatic pressure
- BS ISO 17885:2021(2022) Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
- DIN EN 1401-1:1998 Plastic piping systems for underground non-pressure sewers and pipes – plasticizer-free polyvinyl chloride (PVC-U) – Part 1: Requirements for pipes, fittings and the piping system
- BS EN 802:1995(1999) Plastics piping and ducting systems — Injection - moulded thermoplastics fittings for pressure piping systems — Test method for maximum deformation by crushing
- BS EN 803:1995(1999) Plastics piping systems — Injection - moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping — Test method for resistance to a short - term internal pressure without end thrust
- BS EN 512:1995(2002) Fibre - cement products — Pressure pipes and joints
- BS 1306:1975(2007) Specification for Copper and copper alloy pressure piping systems
AENOR, Pipeline pressure detection
- UNE-EN 12106:1998 PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) PIPES. TEST METHOD FOR THE RESISTANCE TO INTERNAL PRESSURE AFTER APPLICATION OF SQUEEZE-OFF.
- UNE-EN 639:1995 COMMON REQUIREMENTS FOR CONCRETE PRESSURE PIPES INCLUDING JOINTS AND FITTINGS.
- UNE-EN 1447:2009+A1:2011 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
- UNE-EN 640:1995 REINFORCED CONCRETE PRESSURE PIPES AND DISTRIBUTED REINFORCEMENT CONCRETE PRESSURE PIPES (NON-CYLINDER TYPE), INCLUDING JOINTS AND FITTINGS.
- UNE 53008-1:2014 Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Part 1: Specifications for pipes, fittings and the system
- UNE 10101:1990 INTERNAL COMBUSTION ENGINER. FUEL INJECTION PUMPS. HIGH PRESSURE PIPES FOR TESTING.
- UNE-EN 642:1995 PRESTRESSED CONCRETE PRESSURE PIPES, CYLINDER AND NON-CYLINDER, INCLUDING JOINTS, FITTINGS AND SPECIFIC REQUIREMENT FOR PRESTRESSING STEEL FOR PIPES.
- UNE-EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
- UNE-EN 512:1995 FIBRE-CEMENT PRODUCTS. PRESSURE PIPES AND JOINTS.
- UNE-EN 512/A1:2002 Fibre-cement products. Pressure pipes and joints.
Association Francaise de Normalisation, Pipeline pressure detection
- NF EN 802:1994 Systèmes de canalisations et de gaines en plastiques - Raccords thermoplastiques moulés par injection pour canalisations avec pression - Méthode d'essai de déformation maximale par écrasement.
- NF T54-010*NF EN ISO 3458:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure
- NF E29-002:1982 Pipeworks : pressures and temperatures. Definitions.
- NF EN 12106:1997 Systèmes de canalisations en plastique - Tubes en polyéthylène (PE) - Méthode d'essai de résistance à la pression interne après application de l'écrasement.
- NF T57-204/IN1*NF EN 1447/IN1:2010 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
- NF T57-204*NF EN 1447+A1:2010 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
- NF T54-041:1994 Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust.
- NF EN 13476-2/IN1:2020 Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et p...
- NF EN 13476-1:2018 Systèmes de canalisations en plastiques pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisation à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et p...
- NF EN 13476-3+A1:2020 Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et p...
- NF EN 13476-2+A1:2020 Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et p...
- NF EN 13476-3/IN1:2020 Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et p...
- NF T54-012:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
- NF T54-012*NF EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
- NF EN ISO 3458:2015 Systèmes de canalisations en plastique - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression interne
- NF EN ISO 13262:2017 Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Tubes thermoplastiques à paroi structurée enroulés en hélice - Détermination de la résistance en traction de la ligne de soudure
- NF E29-532:1981 Pipeworks. Dismountable fittings with flat gasket. PN 10.
- NF EN ISO 13845:2015 Systèmes de canalisations en plastiques - Assemblages par emboîture à bague d'étanchéité en élastomère pour les tubes sous pression plastiques - Méthodes d'essai d'étanchéité sous pression interne et avec déviation angulaire
- NF EN ISO 13846:2002 Systèmes de canalisations en plastiques - Assemblages et jonctions avec et sans effet de fond pour canalisations thermoplastiques avec pression - Méthode d'essai pour vérifier l'étanchéité à long terme sous une pression d'eau interne
- NF EN 13598-2:2020 Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 2 : spécifications relati...
- NF EN 13598-1:2020 Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 1 : spécifications relati...
- NF T54-045*NF EN 802:1994 Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing.
- NF E29-579:1987 Piping. Fittings with rounded thread. ISO PN 16 and ISO PN 25.
- NF EN 512/A1:2002 Produits en fibres-ciment - Tuyaux pressions et joints
- NF EN 12201-2/IN1:2013 Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 2 : tubes
- NF EN 12201-2+A1:2013 Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 2 : tubes
- NF T54-025:1995 Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature.
ZA-SANS, Pipeline pressure detection
- SANS 677:2003 Concrete non-pressure pipes
- SANS 677:2010 Concrete non-pressure pipes
- SANS 966-2:2006 Components of pressure pipe systems Part 2: Modified poly(vinyl chloride)(PVC-M) pressure pipe systems
- SANS 966-2:2008 Components of pressure pipe systems Part 2: Modified poly(vinyl chloride)(PVC-M) pressure pipe systems
- SANS 966-1:2006 Components of pressure pipe systems Part 1: Unplasticized poly(vinyl chloride) (PVC-U) pressure pipe systems
- SANS 966-1:2008 Components of pressure pipe systems Part 1: Unplasticized poly(vinyl chloride) (PVC-U) pressure pipe systems
- SANS 966-1:2019 Components of pressure pipe systems Part 1: Unplasticized poly(vinyl chloride) (PVC-U) pressure pipe systems
GOSTR, Pipeline pressure detection
- GOST R ISO 3458-2020 Plastis piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under internal pressure
- GOST R ISO 3503-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under internal pressure of assemblies subjected to bending
- GOST 6482-2011 Reinforced concrete nonpressure pipes. Specifications
Korean Agency for Technology and Standards (KATS), Pipeline pressure detection
- KS M ISO 3458:2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leak tightness under internal pressure
- KS B ISO 7268-2002(2012) Pipe components－Definition of nominal pressure
- KS M ISO 13846-2012(2017) Plastics piping systems－End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping－Test method for long-term leaktightness under internal water pressure
- KS M ISO 13846-2012(2022) Plastics piping systems－End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping－Test method for long-term leaktightness under internal water pressure
KR-KS, Pipeline pressure detection
- KS M ISO 3458-2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leak tightness under internal pressure
American Society of Mechanical Engineers (ASME), Pipeline pressure detection
- ASME B31.1B-2009 Addenda to ASME B31.1-2007 Power Piping ASME Code for Pressure Piping, B31
- ASME PCC-2-2015 Repair of Pressure Equipment and Piping (PCC-2 - 2015)
- ASME PCC-2-2011 Repair of Pressure Equipment and Piping
- ASME PCC-2S-2015 Repair of Pressure Equipment and Piping
- ASME B31 G-2012 Manual for Determining the Remaining Strength of Corroded Pipelines: Supplement to ASME B31 Code for Pressure Piping
- ASME PCC-2-2018 Repair of Pressure Equipment and Piping
- ASME B31.1a Addenda-2008 Code for Pressure Piping; Addenda
- ASME PCC-2-2008 Repair of Pressure Equipment and Piping
- ASME PCC-2-2006 Repair of Pressure Equipment and Piping
- ASME PCC-2-2022 Repair of Pressure Equipment and Piping
- ASME B31G-1991 Manual for determining the remaining strength of corroded pipelines; A supplement to ASME B31 code for pressure piping
- ASME B31.G-2009 Manual for Determining the Remaining Strength of Corroded Pipelines: Supplement to ASME B31 Code for Pressure Piping (B31G - 2009)
- ASME B31G-2009 Manual for Determining the Remaining Strength of Corroded Pipelines: Supplement to ASME B31 Code for Pressure Piping
- ASME STP-PT-028-2009 IMPACT TESTING EXEMPTION CURVES FOR LOW TEMPERATURE OPERATION OF PRESSURE PIPING
TH-TISI, Pipeline pressure detection
- TIS 910-1989(en) POLYBUTYLENE (PB) PRESSURE PIPE AND TUBING FOR DRINKING WATER SERVICES
ESDU - Engineering Sciences Data Unit, Pipeline pressure detection
Anhui Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB34/T 727-2018 Inspection regulations for urban natural gas buried steel pressure pipelines (direct detection)
- DB34/T 1193-2021 Direct Buried Heat Pipeline Inspection Regulations
- DB34/T 1488-2011 Pressure Pipe Installation Supervision Inspection Regulation for Ammonia Refrigeration System
- DB34/T 1488-2020 Ammonia Refrigeration System Pressure Piping Installation Supervision and Inspection Regulations
- DB34/T 2285-2015 Power pipeline installation supervision and inspection regulations
- DB34/T 3079-2018 Regulations for the management of relief wells and piezometric tubes in river embankments
Guangdong Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB44/T 2001-2017 Rules for Periodic Inspection of Pressure Pipelines Using Ammonia Refrigeration
Tianjin Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB12/T 761-2018 Periodic inspection and assessment of in-use ammonia-related pressure pipelines
CEN - European Committee for Standardization, Pipeline pressure detection
- PREN 15012-2011 Plastics piping systems - Non pressure soil and waste discharge piping components within the building structure - Requirements and test/assessment methods for pipes and fittings
- PREN 15014-2014 Plastics piping systems - Buried and above ground piping components for water under pressure - Requirements and test/assessment methods for pipes and fittings
- PREN 15013-2014 Plastics piping systems - Non-pressure drainage and sewerage piping components buried in ground - Requirements and test/assessment methods for pipes and fittings
- EN 921:1994 Plastics Piping Systems - Thermoplastics Pipes - Determination of Resistance to Internal Pressure at Constant Temperature (Incorporating Corrigendum 1995)
Danish Standards Foundation, Pipeline pressure detection
- DS/EN 804:1995 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
- DS/EN 639:1995 Common requirements for concrete pressure pipes including joints and fittings
- DS/EN 640:1995 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
- DS/EN 25136:1994 Acoustics. Determination of sound power radiated into a duct by fans. In-duct method
- DS/ISO 5136:1992 Acoustics. Determination of sound power radiated into a duct by fans. In-duct method
- DS/EN 1447+A1:2011 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of long-term resistance to internal pressure
- DS/EN 1229:1998 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure
- DS/EN 715:1995 Thermoplastics piping systems - End-load bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust
- DS/EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
- DS/EN 512/A1:2002 Fibre-cement products - Pressure pipes and joints
- DS/EN 512:1996 Fibre-cement products - Pressure pipes and joints
- DS/EN 802:1995 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
- DS/EN 803:1995 Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust
Lithuanian Standards Office , Pipeline pressure detection
- LST EN 804-2002 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
- LST EN 639-2000 Common requirements for concrete pressure pipes including joints and fittings
- LST EN 1447-2009+A1-2011 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
- LST EN 640-2000 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
- LST EN 1229-2002 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure
- LST EN 715-2002 Thermoplastics piping systems - End-load bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust
- LST EN 1411-2002 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
- LST EN 512-2000/A1-2001 Fibre-cement products - Pressure pipes and joints
- LST EN 512-2000 Fibre-cement products - Pressure pipes and joints
- LST EN 802-2001 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
- LST EN 803-2002 Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust
Professional Standard - Electricity, Pipeline pressure detection
- DL/T 1452-2015 Ultrasonic guided wave inspection of pipelines in thermal power plants
- DL/T 2362-2021 Technical Guidelines for Ultrasonic Testing of Bellows for Pipeline Expansion Joints in Thermal Power Plants
Henan Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB41/T 1827-2019 Specification for Phased Array Ultrasonic Testing of Circumferential Welded Joints of Pressure Piping
- DB41/T 2196-2021 Technical Specifications for Corrosion Management of Pressure Vessels and Pressure Piping in Hazardous Chemical Enterprises
Association of German Mechanical Engineers, Pipeline pressure detection
Zhejiang Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB3309/T 35-2019 Specifications for the maintenance and management of pressure vessels and pressure pipelines in cold storage
American Society for Testing and Materials (ASTM), Pipeline pressure detection
- ASTM D2513-03a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
- ASTM D2513-03b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
- ASTM D2513-03 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
- ASTM F3226/F3226M-16 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
- ASTM F3226/F3226M-16e1 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
- ASTM F1041-20 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
- ASTM A377-18 Standard Index of Specifications for Ductile Iron Pressure Pipe
- ASTM F2562/F2562M-07 Standard Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
- ASTM F2562/F2562M-15(2019) Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
- ASTM F1041-02(2016) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
- ASTM D1599-99(2011) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
- ASTM F2785-20e1 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
- ASTM F2785-20 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
- ASTM F2785-18 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
- ASTM F2785-18a Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
- ASTM F2945-15 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
- ASTM F2945-18 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
- ASTM D2513-06b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
- ASTM D2513-06a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
- ASTM D2513-06 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
YU-JUS, Pipeline pressure detection
American Water Works Association (AWWA), Pipeline pressure detection
Professional Standard - Chemical Industry, Pipeline pressure detection
Beijing Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB11/T 796-2011 Specifications for daily maintenance and periodic inspection of public pressure pipelines
- DB11/T 1699-2019 Technical requirements for X-ray digital imaging detection of ammonia refrigeration pressure pipelines
National Association of Corrosion Engineers (NACE), Pipeline pressure detection
API - American Petroleum Institute, Pipeline pressure detection
- API PUBL 4716-2002 Buried Pressurized Piping Systems Leak Detection Guide
- API RP 1110-1991 Pressure Testing of Liquid Petroleum Pipelines Third Edition
- API RP 1110-1972 RECOMMENDED PRACTICE FOR THE PRESSURE TESTING OF LIQUID PETROLEUM PIPELINES (First Edition)
- API RP 1110-1981 RECOMMENDED PRACTICE FOR THE PRESSURE TESTING OF LIQUID PETROLEUM PIPELINES (Second Edition)
GM Europe, Pipeline pressure detection
- GME 14018-2007 Testing the Force Fit of Pipe Connections of Exhaust System Pipes (English/German; Note: This specification may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14449.)
NO-SN, Pipeline pressure detection
- NS 128-1978 Pipes, fittings, flanges and valves - Nominal pressure PN
- NS 152-1973 Piping - Pressure and temperature ratings for pipeline components of ferrous materials
- NS 5910-1988 Fluid power - Hydraulics - Cleaning of hydraulic pipe systems
Liaoning Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB21/T 2170.1-2013 Heating plastic pipe engineering technical specification part 1: aluminum-plastic composite pressure pipe
BELST, Pipeline pressure detection
- STB 2162-2011 Oil pipeline pipes. Testing method by internal pressure to fracture
WRC - Welding Research Council, Pipeline pressure detection
- BULLETIN 335-1988 A REVIEW OF AREA REPLACEMENT RULES FOR PIPE CONNECTIONS IN PRESSURE VESSELS AND PIPING
- BULLETIN 425-1997 A REVIEW OF METHODS FOR THE ANALYSIS OF BURIED PRESSURE PIPING
ES-AENOR, Pipeline pressure detection
Military Standard of the People's Republic of China-General Armament Department, Pipeline pressure detection
- GJB 6861-2009 Inspection and maintenance rules for the pressure pipe of base complexes of the ground missile
Canadian Standards Association (CSA), Pipeline pressure detection
Defense Logistics Agency, Pipeline pressure detection
Professional Standard - Urban Construction, Pipeline pressure detection
American Welding Society (AWS), Pipeline pressure detection
- WRC 360:1991 Stress Indices, Pressure Design And Stress Intensification Factors For Laterals In Piping
- WRC 472:2002 A Review of Methods for the Analysis of Buried Pressure Piping
- WRC 425:1997 A Review of Methods for the Analysis of Buried Pressure Piping
American Petroleum Institute (API), Pipeline pressure detection
Inner Mongolia Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB15/T 1477-2018 Atmospheric pressure pipeline installation quality inspection rules
RU-GOST R, Pipeline pressure detection
NZ-SNZ, Pipeline pressure detection
Professional Standard - Energy, Pipeline pressure detection
Chongqing Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB50/T 04-2016 Energy-saving monitoring method of thermal pipeline
- DB50/T 04-1997 Thermal pipeline energy conservation monitoring regulations
Gansu Provincial Standard of the People's Republic of China, Pipeline pressure detection
Professional Standard - Building Materials, Pipeline pressure detection
- JC/T 230-2012 Test methods for resistance of internal pressure of quartz
- JC/T 230-1993 Quartz glass tube resistance to internal pressure test method
Professional Standard - Recommended Standards for Engineering Construction, Pipeline pressure detection
- CECS 237-2008 Water supply steel-plastic composite pressure pipe engineering technical regulations
TR-TSE, Pipeline pressure detection
- TS 102-1964 ASBESTOS CEMENT PRESSURE PIPES AND SPECIAL CASTINGS
- TS 3417-1979 MEASUREMENT OP FLUID PLOW IN CLOSED CONDUITS - VELOCITY AREA METHOD USING PITOT STATIC TUBES
Yunnan Provincial Standard of the People's Republic of China, Pipeline pressure detection
- DB53/T 811-2016 Technical specification for detection of grouting density of bridge prestressed pipelines
Japanese Industrial Standards Committee (JISC), Pipeline pressure detection
- JIS K 7031:2003 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure