ZH
RU
ES
Moore's uncertainty
Moore's uncertainty, Total:498 items.
In the international standard classification, Moore's uncertainty involves: Natural gas, Quality, Metrology and measurement in general, Testing of metals, Motor cycles and mopeds, Linear and angular measurements, Thermodynamics and temperature measurements, Measurement of fluid flow, Measurement of volume, mass, density, viscosity, Acoustics and acoustic measurements, Protection of and in buildings, Test conditions and procedures in general, Radiation protection, Leather technology, Aircraft and space vehicles in general, Laundry appliances, Transformers. Reactors, Air quality, Medical equipment, Pulps, Paper and board, Radiation measurements, Protection against fire, Electricity. Magnetism. Electrical and magnetic measurements, Microbiology, Gas and steam turbines. Steam engines, Physics. Chemistry, Analytical chemistry, Electromagnetic compatibility (EMC), Optics and optical measurements, Electrical engineering in general, Electrical and electronic testing, Water quality, Vocabularies, Industrial automation systems, Glass, Fibre optic communications, Heat pumps, Nuclear energy engineering, Vibration and shock with respect to human beings, Applications of information technology, Geology. Meteorology. Hydrology, Vacuum technology, Energy and heat transfer engineering in general, Domestic electrical appliances in general, Non-destructive testing, Graphic technology, Pharmaceutics, Machine tools, Powder metallurgy, Hand-held tools, Environmental testing, Aerospace engines and propulsion systems.
RU-GOST R, Moore's uncertainty
- GOST 31371.7-2008 Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 7. Measurement procedure of the mole fraction of components
- GOST R 54500.1-2011 Uncertainty of measurement. Part 1. Introduction to guides on uncertainty in measurement
- GOST R 54500.3-2011 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement
- GOST 34100.3-2017 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement
- GOST 34100.1-2017 Uncertainty of measurement. Part 1. Introduction to guides on the expression of uncertainty in measurement
- GOST R 57900-2017 Buildings and constructions. Determination and application of measurement uncertainties of sound insulation
- GOST 34100.3.2-2017 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement. Supplement 2. Extension to any number of output quantities
- GOST 34100.3.1-2017 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement. Supplement 1. Propagation of distributions using a Monte Carlo method
- GOST R 54500.3.1-2011 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement. Supplement 1. Propagation of distributions using a Monte Carlo method
- GOST R 8.913-2016 State system for ensuring the uniformity of measurements. Satellite laser ranging systems. Accuracy and measurement uncertainty. Standardized metrological characteristics
- GOST R 54502-2011 Microbiology of food and animal feeding stuffs. Guidelines for the estimation of measurement uncertainty for quantitative determinations
- GOST 32298-2013 Glass and glass products. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
- GOST CISPR 16-4-2-2013 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 4-2. Uncertainties, statistics and limit modelling. Measurement instrumentation uncertainty
- GOST 31371.1-2008 Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 1. Guidelines for tailored analysis
GOSTR, Moore's uncertainty
- GOST 31371.7-2020 Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 7. Measurement procedure of the mole fraction of components
- GOST 31371.1-2020 Natural gas. Determination of composition by gas chromatography method with evaiuation of uncertainty. Part 1. General guidelines and calculation of composition
International Organization for Standardization (ISO), Moore's uncertainty
- ISO/TS 23471:2022 Experimental designs for evaluation of uncertainty — Use of factorial designs for determining uncertainty functions
- ISO/IEC GUIDE 98-1:2009 Uncertainty of measurement —
Part 1:
Introduction to the expression of
uncertainty in measurement
- ISO/DTR 15263:2023 Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
- ISO/CD TR 15263 Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
- ISO/TS 17503:2015 Statistical methods of uncertainty evaluation - Guidance on evaluation of uncertainty using two-factor crossed designs
- ISO/TS 25377:2007 Hydrometric uncertainty guidance (HUG)
- ISO 25377:2020 Hydrometric uncertainty guidance (HUG)
- ISO/TR 20461:2000 Determination of uncertainty for volume measurements made using the gravimetric method
- ISO/TR 20461:2023 Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a gravimetric method
- ISO/TR 21900:2018 Guidance for uncertainty analysis regarding the application of ISO/TS 10974
- ISO 5168:2005 Measurement of fluid flow - Procedures for the evaluation of uncertainties
- ISO/TR 24498:2006 Paper, board and pulps - Estimation of uncertainty for test methods
- ISO/ASTM 51707:2002 Guide for estimating uncertainties in dosimetry for radiation processing
- ISO/ASTM 51707:2005 Guide for estimating uncertainties in dosimetry for radiation processing
- ISO 5168:1978 Measurement of fluid flow; Estimation of uncertainty of a flow-rate measurement
- ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process
- ISO 19036:2019 Microbiology of the food chain — Estimation of measurement uncertainty for quantitative determinations
- ISO/CD TR 15262 Mechanical tests on metallic materials — Uncertainty in low-cycle fatigue
- ISO/CD TR 6037 Automated liquid handling systems – Uncertainty of the measurement procedures
- ISO/TR 16153:2004 Piston-operated volumetric instruments - Determination of uncertainty for volume measurements made using the photometric method
- ISO/TR 16153:2023 Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a photometric method
- ISO/TS 19036:2006/Amd 1:2009 Microbiology of food and animal feeding stuffs - Guidelines for the estimation of measurement uncertainty for quantitative determinations - Amendment 1: Measurement uncertainty for low counts
- ISO/IEC Guide 98-6:2021 Uncertainty of measurement-- Part 6:Developing and using measurement models
- ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
- ISO/TS 22704:2022 Mechanical vibration — Uncertainty of the measurement and evaluation of human exposure to vibration
- ISO 12999-1:2014 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
- ISO 12999-2:2020 Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
- ISO 12999-1:2020 Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation
- ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- ISO 29201:2012 Water quality - The variability of test results and the uncertainty of measurement of microbiological enumeration methods
- ISO/TR 20461:2000/cor 1:2008 Determination of uncertainty for volume measurements made using the gravimetric method; Technical Corrigendum 1
- ISO/TS 24498:2022 Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons
- ISO 24477:2022 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges
- ISO 20146:2019 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
- ISO/TR 7066-1:1997 Assessment of uncertainty in calibration and use of flow measurement devices - Part 1: Linear calibration relationships
- ISO 6974-1:2000 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis
- ISO 19685:2017 Vacuum technology - Vacuum gauges - Specifications, calibration and measurement uncertainties for Pirani gauges
- ISO 7066-2:1988 Assessment of uncertainty in the calibration and use of flow measurements devices; part 2: non-linear calibration relationships
- ISO 15767:2009 Workplace atmospheres - Controlling and characterizing uncertainty in weighing collected aerosols
- ISO 1088:2007 Hydrometry - Velocity-area methods using current-meters - Collection and processing of data for determination of uncertainties in flow measurement
- ISO 13752:1998 Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference
- ISO/TR 16015:2003 Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
- ISO 7066-1:1989 Assessment of uncertainty in the calibration and use of flow measurement devices; part 1: linear calibration relationships
- ISO 27893:2011 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
- ISO/TS 27893:2009 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
- ISO 6974-1:2012 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition
- ISO 6789-2:2017 Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty
- ISO 6974-2:2012 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations
Korean Agency for Technology and Standards (KATS), Moore's uncertainty
- KS Q ISO/IEC GUIDE 98-3-2017(2022) Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement
- KS R ISO 7117-2014(2019) Motorcycles — Measurement method for determining maximum speed
- KS Q ISO TS 17503:2021 Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs
- KS B ISO TR 5168:2004 Measurement of fluid flow Evaluation of uncertainties
- KS M ISO TR 24498:2008 Paper, board and pulps－Estimation of uncertainty for test methods
- KS A ISO/ASTM 51707:2012 Guide for estimating uncertainties in dosimetry for radiation processing
- KS Q ISO TR 13587:2021 Three statistical approaches for the assessment and interpretation of measurement uncertainty
- KS M ISO TR 24498:2018 Paper, board and pulps — Estimation of uncertainty for test methods
- KS I ISO 11222:2021 Air quality — Determiniation of the uncertainty of the time average of air quality measurements
- KS C CISPR TR 16-4-1-2012 Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests
- KS C CISPR TR 16-4-1-2012(2017) Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests
- KS I ISO 11222-2006(2016) Air quality－Determination of the uncertainty of the time average of air quality measurements
- KS Q ISO 21749-2015(2020) Measurement uncertainty for metrological applications－Repeated measurements and nested experiments
- KS B ISO 7066-2:2014 Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships
- KS B ISO 7066-2:2004 Assessment of uncertainty in the calibration and use of flow measurement devices-Part2:Non-linear calibration relationships
- KS I ISO 15767-2012(2017) Workplace atmospheres－Controlling and characterizing uncertainty in weighing collected aerosols
- KS I ISO 6974-1-2015(2020) Natural gas－Determination of composition with defined uncertainty by gas chromatography－Part 1：Guidelines for tailored analysis
- KS B ISO TR 7066-1-2004(2014) Assessment of uncertainty in calibration and use of flow measurement devices－Part 1：Linear calibration relationships
- KS B ISO 1088:2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
- KS B ISO 1088:2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
- KS I ISO 15767:2012 Workplace atmospheres－Controlling and characterizing uncertainty in weighing collected aerosols
- KS B ISO 1088:2005 Liquid flow measurement in open channels-Velocity-area methods-Collection and processing of data for determination of errors in measurement
- KS B ISO 16015:2014 Geometrical Product Specifications(GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
- KS B ISO 16015:2005 Geometrical product specifications(GPS)-Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
- KS C CISPR TR 16-4-1-2012(2022) Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests
- KS B ISO 15530-3:2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
- KS I ISO 6974-1:2006 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 1:Guidelines for tailored analysis
- KS I ISO 6974-1:2015 Natural gas－Determination of composition with defined uncertainty by gas chromatography－Part 1：Guidelines for tailored analysis
- KS I ISO 14956-2008(2018) Air quality－Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- KS I ISO 6974-2:2006 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 2:Measuring-system characteristics and statistics for processing of data
- KS I ISO 6974-2:2015 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 2:Measuring-system characteristics and statistics for processing of data
- KS C IEC 60068-3-11-2014(2019) Environmental testing — Part 3-11: Supporting documentation and guidance — Calculation of uncertainty of conditions in climatic test chambers
- KS B ISO 16015-2014(2019) Geometrical Product Specifications(GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
Association Francaise de Normalisation, Moore's uncertainty
- NF X07-040-3*NF ISO/IEC GUIDE 98-3:2014 Uncertainly of measurement - Part 3 : guide to the expression of uncertainly in measurement (GUM : 1995)
- NF ISO/IEC GUIDE 98-4:2013 Incertitude de mesure - Partie 4 : rôle de l'incertitude de mesure dans l'évaluation de la conformité
- NF X07-040-4*NF ISO/IEC GUIDE 98-4:2013 Uncertainty of measurement - Part 4: role of measurement uncertainty in conformity assessment
- NF EN 62754:2017 Calcul des incertitudes des paramètres des formes d'onde
- CWA 15261-3:2005 Measurement uncertainties in mechanical tests on metallic materials - Part 3 : the evaluation of uncertainties in creep testing
- CWA 15261-2:2005 Measurement uncertainties in mechanical tests on metallic materials - Part 2 : the evaluation of uncertainties in tensile testing
- XP ISO/TS 15530-4:2008 Spécification géométrique des produits (GPS) - Machines à mesurer tridimensionnelles (MMT) : technique pour la détermination de l'incertitude de mesure - Partie 4 : évaluation de l'incertitude de mesure spécifique d'une tâche à l'aide de s...
- NF EN ISO 26082-1:2019 Cuir - Méthodes d'essai physique et mécanique de détermination de la salissure - Partie 1 : méthode par frottement (Martindale)
- CWA 15261-1:2005 Measurement uncertainties in mechanical tests on metallic materials - Part 1 : the evaluation of uncertainties in low-cycle fatigue testing
- XP E11-158-4*XP ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
- NF ISO 11222:2002 Qualité de l'air - Détermination de l'incertitude de mesure de la moyenne temporelle de mesurages de la qualité de l'air
- NF EN ISO 20988:2007 Qualité de l'air - Lignes directrices pour estimer l'incertitude de mesure
- NF EN ISO 12999-1:2020 Acoustique - Détermination et application des incertitudes de mesure dans l'acoustique des bâtiments - Partie 1 : isolation acoustique
- NF EN ISO 12999-2:2020 Acoustique - Détermination et application des incertitudes de mesure dans l'acoustique des bâtiments - Partie 2 : absorption acoustique
- NF ISO 24185:2022 Évaluation de l'incertitude de mesure d'un processus stationnaire autocorrélé
- FD X15-120:2005 Mesure de l'humidité de l'air - Expression des incertitudes - Étude de cas concrets
- NF EN ISO 19036:2019 Microbiologie de la chaîne alimentaire - Estimation de l'incertitude de mesure pour les déterminations quantitatives
- FD ISO/TR 16153:2023 Détermination de l'incertitude de mesure pour les mesurages volumétriques des appareils volumétriques à piston au moyen de la méthode photométrique
- FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
- NF C91-016-4-2:2005 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2 : uncertainties, statistics and limit modelling - Incertainty in EMC measurements.
- FD X07-028:2002 Metrology - Calibration and verification procedure for thermometers - Estimation of the uncertainties on temperature measurements
- NF ISO 21748:2017 Lignes directrices relatives à l'utilisation d'estimations de la répétabilité, de la reproductibilité et de la justesse dans l'évaluation de l'incertitude de mesure
- XP ISO/TS 21749:2005 Incertitude de mesure pour les applications en métrologie - Mesures répétées et expériences emboîtées
- NF C52-176-19*NF EN 60076-19:2016 Power transformers - Part 19 : rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
- XP X06-066*XP ISO/TS 21749:2005 Measurement and uncertainty for metrological applications - Repeated measurements and nested experiments
- XP ISO/TS 20914:2020 Laboratoires de biologie médicale - Recommandations pratiques pour l'estimation de l'incertitude de mesure
- NF S31-999-1:2014 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1 : sound insulation
- NF S31-999-1:2020 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1 : sound insulation
- NF S31-999-2*NF EN ISO 12999-2:2020 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2 : sound absorption
- NF C91-016-4-2/A1*NF EN 55016-4-2/A1:2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2 : uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
- NF C91-016-4-2*NF EN 55016-4-2:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2 : uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
- FD X43-070-3:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 3 : Estimation of the uncertainties on measurements of benzene conducted in situ by diffusion tube followed by a thermal desorpt
- NF ISO 15767:2009 Air des lieux de travail - Contrôle et caractérisation de l'incertitude de pesée des aérosols collectés
- XP CEN ISO/TS 15530-1:2013 Spécification géométrique des produits (GPS) - Machines à mesurer tridimensionnelles (MMT) : technique pour la détermination de l'incertitude de mesure - Partie 1 : vue d'ensemble et caractéristiques métrologiques
- XP E11-160-1*XP CEN ISO/TS 15530-1:2013 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM) : technique for determining the uncertainty of measurement - Part 1 : overview and metrological characteristics
- XP S31-115-1:2019 Acoustics - Assessment method of measurement uncertainties in environment acoustics - Part 1 : influence of measuring instruments
- NF EN 55016-4-2/A1:2014 Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 4-2 : incertitudes, statistiques et modélisation des limites - Incertitudes de mesure de l'in...
- NF EN 55016-4-2/A2:2018 Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 4-2 : incertitudes, statistiques et modélisation des limites - Incertitudes de mesure de l'in...
- NF EN 55016-4-2:2012 Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 4-2 : incertitudes, statistiques et modélisation des limites - Incertitudes de mesure de l'in...
- NF EN ISO 15530-3:2011 Spécification géométrique des produits (GPS) - Machines à mesurer tridimensionnelles (MMT) : Technique pour la détermination de l'incertitude de mesure - Partie 3 : utilisation de pièces étalonnées ou d'étalons de mesure
- FD X43-070-7:2011 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 7 : estimation of the uncertainties on measurements of benzo[a]pyrene conducted in situ on PM10 fraction
- NF X10-107:1990 Assessment of uncertainty in the calibration and use of flow measurement devices. Part 1 : linear calibration relationships.
- NF EN ISO 6974-6:2005 Gaz naturel - Détermination de la composition avec une incertitude définie par chromatographie en phase gazeuse - Partie 6 : détermination de l'hydrogène, de l'hélium, de l'oxygène, de l'azote, du dioxyde de carbone et des hydrocarbures C1 à...
- FD ISO/TR 16015:2007 Spécification géométrique des produits (GPS) - Erreurs systématiques et contributions à l'incertitude de mesure de la longueur, dues aux influences thermiques
- FD X43-070-8:2011 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 8 : estimation of the uncertainties on measurements of Pb, Cd, As and Ni conducted in situ in the PM10 fraction
- FD X43-070-2:2015 Air quality - Practical guidance for estimating the uncertainty of measurement of pollutant concentration in ambient air - Part 2 : estimation of the uncertainties associated with the automated measurements of SO2, NO, NOx, NO2, O3 and CO carried out on s
- NF EN 60076-19:2016 Transformateurs de puissance - Partie 19 : règles pour la détermination des incertitudes de mesure des pertes des transformateurs de puissance et bobines d'inductance
- NF E11-160-3*NF EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): technique for determining the uncertainty of measurement - Part 3 : use of calibrated workpieces or measurement standards
- NF X20-510-1*NF EN ISO 6974-1:2012 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1 : general guidelines and calculation of composition
- NF X10-525*NF ISO 27893:2013 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
- FD X43-070-4:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 4 : estimation of the uncertainties on on-site diffusion tube measurements of nitrogen dioxide, followed by a laboratory spectro
- FD X07-023:2012 Metrology - Evaluation of measurement uncertainty using Monte-Carlo simulations - Principles and application of the Supplement 1 to the GUM
- NF ISO 7066-2:1988 Évaluation de l'incertitude dans l'étalonnage et l'utilisation des appareils de mesure du débit - Partie 2 : relations d'étalonnage non linéaires.
- FD X07-022:2004 Métrologie et applications de la statistique - Utilisation des incertitudes de mesures : présentation de quelques cas et pratiques usuelles
- NF ISO 13752:1998 Qualité de l'air - Évaluation de l'incertitude d'une méthode de mesurage sur site en utilisant une seconde méthode comme référence
- NF X43-508*NF EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- NF EN ISO 6974-4:2003 Gaz naturel - Détermination de la composition avec une incertitude définie par chromatographie en phase gazeuse - Partie 4 : détermination de l'azote, du dioxide de carbone et des hydrocarbures (C1 à C5 et C6+) pour un laboratoire et un système d...
- NF A95-323/A1*NF EN ISO 3325/A1:2003 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1 : precision statement
- FD E10-001*FD ISO/TR 16015:2007 Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
Professional Standard - Agriculture, Moore's uncertainty
IX-FAO, Moore's uncertainty
Japanese Industrial Standards Committee (JISC), Moore's uncertainty
- JIS Z 8404-1:2006 Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
- JIS Z 8404-1:2018 Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
- JIS Z 8404-2:2008 Measurement uncertainty -- Part 2: Measurement uncertainty for metrological applications -- Repeated measurements and nested experiments
Danish Standards Foundation, Moore's uncertainty
- DS/ISO/IEC Guide 98-4:2012 Uncertainty of measurement - Part 4: Role of measurement uncertainty in conformity assessment
- DS/ISO/TR 20461:2001 Determination of uncertainty for volume measurements made using the gravemetric method
- DS/CLC/TR 50462:2008 Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
- DS/ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
- DS/ISO 12999-1:2020 Acoustics – Determination and application of measurement uncertainties in building acoustics – Part 1: Sound insulation
- DS/ISO 29473:2011 Fire tests – Uncertainty of measurements in fire tests
- DS/ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
- DS/IEC Guide 115:2007 Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector
- DS/ISO 11222:2003 Air quality - Determination of the uncertainty of the time average of air quality measurements
- DS/ISO/TR 16153:2005 Piston-operated volumetric instruments - Determination of uncertainty for volume measurements made using the photometric method
- DS/IEC/TS 60076-19:2013 Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of losses in power transformers and reactors
- DS/ISO/TS 21749:2005 Measurement and uncertainty for metrological applications - Repeated measurements and nested experiments
- DS/ISO/TS 19036/Amd. 1:2011 Microbiology of food and animal feeding stuffs - Guidelines for the estimation of measurement uncertainty for quantitative determinations
- DS/ISO/TS 19036:2006 Microbiology of food and animal feeding stuffs - Guidelines for the estimation of measurement uncertainty for quantitative determinations
- DS/ISO 11352:2012 Water quality - Estimation of measurement uncertainty based on validation and quality control data
- DS/CEN ISO/TS 15530-1:2013 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics
- DS/EN ISO 12999-1:2020 Acoustics – Determination and application of measurement uncertainties in building acoustics – Part 1: Sound insulation (ISO 12999-1:2020)
- DS/EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
- DS/EN ISO 14956:2003 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- DS/ISO/TR 16015:2006 Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
European Committee for Electrotechnical Standardization（CENELEC）, Moore's uncertainty
- CLC IEC/TR 62461:2019 Radiation protection instrumentation - Determination of uncertainty in measurement
- EN 60076-19:2015 Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
British Standards Institution (BSI), Moore's uncertainty
- BS EN ISO 6974-2:2001 Natural gas. Determination of composition with defined uncertainty by gas chromatography. Measuring-system characteristics and statistics for processing of data
- BS EN ISO 6974-2:2012 Natural gas. Determination of composition and associated uncertainty by gas chromatography. Uncertainty calculations
- BS ISO 7117:2010 Motorcycles - Measurement method for determining maximum speed
- BS PD CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
- BS PD ISO/TS 17503:2015 Statistical methods of uncertainty evaluation. Guidance on evaluation of uncertainty using two-factor crossed designs
- BS DD CEN ISO/TS 25377:2007 Hydrometric uncertainty guide
- ISO/IEC GUIDE 98-3:2008/Suppl.2:2011 Uncertainty of measurement - Guide to the expression of uncertainty in measurement (GUM:1995). Extension to any number of output quantities
- DD ISO/TS 15530-4:2008 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement - Evaluating task-specific measurement uncertainty using simulation
- BS EN ISO 12999-2:2020 Acoustics. Determination and application of measurement uncertainties in building acoustics - Sound absorption
- PD ISO/TR 16153:2023 Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a photometric method
- BS EN ISO 26082-1:2019 Tracked Changes. Leather. Physical and mechanical test methods for the determination of soiling. Rubbing (Martindale) method
- BS ISO 11222:2002 Air quality. Determination of the uncertainty of the time average of air quality measurements
- BS ISO 5168:2005 Measurement of fluid flow - Procedures for the evaluation of uncertainties
- PD ISO/TR 20461:2023 Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a gravimetric method
- BS ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process
- BS ISO 29473:2010 Fire tests. Uncertainty of measurements in fire tests
- BS EN ISO 19036:2019 Microbiology of the food chain. Estimation of measurement uncertainty for quantitative determinations
- BS EN 60076-19:2015 Power transformers. Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
- BS EN ISO 12999-1:2014 Acoustics. Determination and application of measurement uncertainties in building acoustics. Sound insulation
- BS EN ISO 12999-1:2020 Acoustics. Determination and application of measurement uncertainties in building acoustics. Sound insulation
- PD ISO/TR 20461:2001 Determination of uncertainty for volume measurements made using the gravimetric method
- PD ISO/TS 20914:2019 Medical laboratories. Practical guidance for the estimation of measurement uncertainty
- PD ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
- BS DD ISO/TS 15530-4:2008 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Evaluating task-specific measurement uncertainty using simulation
- 19/30383291 DC BS ENISO 12999-1. Acoustics. Determination and application of measurement uncertainties in building acoustics. Part 1. Sound insulation
- BS PD IEC GUIDE 115:2021 Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector
- PD IEC GUIDE 115:2021 Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector
- BS EN 55016-4-2:2004 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Uncertainty in EMC measurements
- PD 6461-4-2004 General metrology - Part 4: Practical guide to measurement uncertainty
- PD IEC/TR 61000-1-6:2012 Electromagnetic compatibility (EMC). General. Guide to the assessment of measurement uncertainty
- 21/30397434 DC BS ISO 24185. Evaluation of the uncertainty of measurements from a stationary autocorrelated process
- 19/30383281 DC BS EN ISO 12999-2. Acoustics. Determination and application of measurement uncertainties in building acoustics. Part 2. Sound absorption
- PD IEC TR 61282-14:2019 Tracked Changes. Fibre optic communication system design guides. Determination of the uncertainties of attenuation measurements in fibre plants
- PD ISO/TS 22704:2022 Mechanical vibration. Uncertainty of the measurement and evaluation of human exposure to vibration
- 18/30351071 DC BS EN ISO 19036. Microbiology of the food chain. Estimation of measurement uncertainty for quantitative determinations
- BS ISO 11222:2007 Air quality - Determination of the uncertainty of the time average of air quality measurements
- PD CEN ISO/TS 15530-1:2013 Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement. Overview and metrological characteristics
- 20/30335823 DC BS EN 60076-19. Power transformers. Part 19. Rules for the determination of uncertainties in the measurement of the losses on power transformers
- PD CISPR/TR 16-4-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Uncertainties in standardized EMC tests
- DD ISO/TS 21749:2005 Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments
- 21/30436064 DC BS EN IEC 60076-19. Power transformers. Part 19. Rules for the determination of uncertainties in the measurement of the losses on power transformers
- BS DD ISO/TS 21749:2005 Measurement and uncertainty for metrological applications - Repeated measurements and nested experiments
- BS ISO 11352:2012 Water quality. Estimation of measurement uncertainty based on validation and quality control data
- BS PD IEC/TR 61282-14:2016 Fibre optic communication system design guides. Determination of the uncertainties of attenuation measurements in fibre plants
- BS EN ISO 6974-3:2018 Tracked Changes. Natural gas. Determination of composition and associated uncertainty by gas chromatography. Precision and bias
- BS ISO 18315:2018 Nuclear energy. Guidance to the evaluation of measurement uncertainties of impurity in uranium solution by linear regression analysis
- BS EN ISO 6789-2:2017 Assembly tools for screws and nuts. Hand torque tools. Requirements for calibration and determination of measurement uncertainty
- BS EN ISO 6974-1:2012 Natural gas. Determination of composition and associated uncertainty by gas chromatography. General guidelines and calculation of composition
- ISO/TR 16015:2003 Ed 1 Geometrical product specifications (GPS). Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influence
- BS ISO 20146:2019 Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
- BS ISO 24477:2022 Vacuum technology.Vacuum gauges.Specifications, calibration and measurement uncertainties for spinning rotor gauges
- BS ISO 1088:2007 Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
- BS ISO 15790:2004 Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty
- BS DD ISO/TS 23165:2007 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
- PD IEC/TR 62627-04:2012 Fibre optic interconnecting devices and passive components. Example of uncertainty calculation: Measurement of the attenuation of an optical connector
- PD ISO/TR 230-9:2005 Test code for machine tools. Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
- 21/30426752 DC BS ISO 24477. Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for spinning rotor gauges
VN-TCVN, Moore's uncertainty
- TCVN 6011-2015 Motorcycles - Measurement method for determining maximum speed
KR-KS, Moore's uncertainty
- KS Q ISO TS 17503-2021 Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs
- KS Q ISO TR 13587-2021 Three statistical approaches for the assessment and interpretation of measurement uncertainty
- KS M ISO TR 24498-2018 Paper, board and pulps — Estimation of uncertainty for test methods
- KS P ISO TS 20914-2022 Medical laboratories — Practical guidance for the estimation of measurement uncertainty
- KS I ISO 11222-2021 Air quality — Determiniation of the uncertainty of the time average of air quality measurements
- KS I ISO 15767-2022 Workplace atmospheres Controlling and characterizing uncertainty in weighing collected aerosols
- KS Q ISO 21748-2018(2023) Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
- KS B ISO 1088-2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
- KS B ISO 15530-3-2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
- KS B ISO TR 230-9-2009 Test code for machine tools－Part 9：Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
Military Standard of the People's Republic of China-General Armament Department, Moore's uncertainty
- GJB 3756-1999 Expression and evaluation of measurement uncertainty
- GJB 3756A-2015 Expression and evaluation of measurement uncertainty
- GJB 1485-1992 Precision, accuracy and uncertainty of material physical property testing methods
Association of German Mechanical Engineers, Moore's uncertainty
- VDI/VDE 2617 Blatt 11-2011 Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets
- VDI/VDE/DGQ/DKD 2622 Blatt 2.1-2011 Calibration of measuring equipment for electrical quantities - Methods for the determination of measurement uncertainty - Notes to a practical approach
- VDI/VDE/DGQ/DKD 2622 Blatt 2-2015 Calibration of measuring equipment for electrical quantities - Methods for the determination of the uncertainty of measurement
- VDI/VDE/DGQ/DKD 2622 Blatt 2-2003 Calibration of measuring means for electrical quantities - Methods for the determination of the measurement uncertainty
- VDI 2449 Blatt 3-2001 Measurement methods test criteria - General method for the determination of the uncertainty of calibratable measurement methods
- VDI/VDE 2629 Blatt 2-2012 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
- VDI 2048 Blatt 1-2000 Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals
- VDI/VDE 2617 Blatt 7-2008 Accuracy of coordinate measuring machines - Parameters and their checking - Estimation of measurement uncertainty of coordinate measuring machines by means of simulation
- VDI/VDE 2630 Blatt 2.1-2015 Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors
- VDI/VDE/DGQ 2618 Blatt 1.2-2003 Inspection of measuring and test equipment - Instructions for the inspection of measuring and test equipment for geometrical quantities - Uncertainty of measurement
- VDI 2048 Blatt 2-2003 Uncertainties of measurement during acceptance tests on energy-conversion and power plants - Examples, especially retrofit measures
CN-STDBOOK, Moore's uncertainty
- 图书 A-4448 Statistical Simulation of Measurement Uncertainty
AENOR, Moore's uncertainty
- UNE 400331:2003 IN Determination of uncertainty for volume measurements made using the gravimetric method.
- UNE-CLC/TR 50462:2009 Rules for the determination of uncertainties in the measurement of the losses on power transformer and reactors
- UNE-EN ISO 26082-1:2012 Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO 26082-1:2012)
- UNE-ISO 11222:2005 Air quality -- Determination of the uncertainty of the time average of air quality measurements
- UNE-EN ISO 12999-1:2014 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014)
- UNE-EN 61262-3:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 3: DETERMINATION OF THE LUMINANCE DISTRIBUTION AND LUMINANCE NON-UNIFORMITY.
- UNE-EN ISO 14956:2003 Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty. (ISO 14956:2002)
German Institute for Standardization, Moore's uncertainty
- DIN SPEC 45660-1:2014 Guide for handling uncertainty in acoustics and vibration - Part 1: Uncertainty of acoustical quantities
- DIN ISO/TS 25377:2008 Hydrometric uncertainty guidance (HUG) (ISO/TS 25377:2007); German version CEN ISO/TS 25377:2007
- DIN ISO 11222:2002-12 Air quality - Determination of the uncertainty of the time average of air quality measurements (ISO 11222:2002)
- DIN 53000-3:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
- DIN V 19218:2008 Measurement of fluid flow - Procedures for the evaluation of uncertainties (ISO 5168:2005, modified)
- DIN EN ISO 12999-1:2021-04 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2020); German version EN ISO 12999-1:2020
- DIN EN ISO 12999-2:2020-11 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound absorption (ISO 12999-2:2020); German version EN ISO 12999-2:2020
- DIN EN ISO 19036:2020-05 Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations (ISO 19036:2019); German version EN ISO 19036:2019
- DIN 53019-2:2001-02 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
- DIN EN ISO 6974-4:2002-06 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line me...
- DIN EN ISO 19036:2020 Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations (ISO 19036:2019)
- DIN EN ISO 19036:2018 Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations (ISO/DIS 19036:2018); German and English version prEN ISO 19036:2018
- DIN EN ISO 14956:2003 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002); German version EN ISO 14956:2002
- DIN ISO 21748:2014 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation (ISO 21748:2010); Text in German and English
- DIN 32632:2019-12 Chemical analysis - Guide to quantification of uncertainty in measurement of quantitative test results - Terms and strategies
- DIN CEN ISO/TS 15530-1:2013-12*DIN SPEC 860:2013-12 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Techniques for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013); German version CEN ISO/TS 15530-1:2013
- DIN EN ISO 12999-2:2020 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound absorption (ISO 12999-2:2020); German version EN ISO 12999-2:2020
- DIN 51562-4:1999 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscometer calibration and determination of the uncertainty of measurement
- DIN EN ISO 6789-2:2017-07 Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017); German version EN ISO 6789-2:2017 / Note: DIN EN ISO 6789 (2003-10) remains valid alongside th...
- DIN 45673-7 Beiblatt 1:2013-02 Water quality - Estimation of measurement uncertainty based on validation and quality control data (ISO 11352:2012)
- DIN 14303:2013-02 Water quality - Estimation of measurement uncertainty based on validation and quality control data (ISO 11352:2012)
- DIN ISO 11352:2013-03 Water quality - Estimation of measurement uncertainty based on validation and quality control data (ISO 11352:2012)
- DIN 1319-3:1996-05 Fundamentals of metrology - Part 3: Evaluation of measurements of a single measurand, measurement uncertainty
- DIN EN ISO 15530-3:2018-09 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011); German version EN 15530-3:2011
- DIN EN 55016-4-2:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty (CISPR 16-4-2:2011); German version EN 55016-4-2:20111
- DIN EN ISO 6974-6:2005-08 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C<(Index)1> to C<(Index)8> hydrocarbons using three capillary column...
- DIN ISO/TS 23165:2008 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty (ISO/TS 23165:2006)
- DIN 32632-1:2013 Chemical analysis - Guide to quantification of uncertainty in measurement of quantitative test results - Part 1: Terms and strategies
- DIN EN ISO 15530-3:2018 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
- DIN EN 55016-4-2:2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty (CISPR 16-4-2:2011 + A1:2014); German version EN 55016-4-2:2011 + A1:2014
- DIN SPEC 1168:2010 Air quality - Approach to uncertainty estimation for ambient air reference measurement methods; German version CR 14377:2002
- DIN ISO 15767:2010 Workplace atmospheres - Controlling and characterizing uncertainty in weighing collected aerosols (ISO 15767:2009)
- DIN EN ISO 14956:2003-01 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002); German version EN ISO 14956:2002
American National Standards Institute （ANSI), Moore's uncertainty
American Society for Testing and Materials (ASTM), Moore's uncertainty
- ASTM E2655-14 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
- ASTM E2536-21 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
- ASTM E2655-14(2020) Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
- ASTM D8293-19 Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
- ASTM E2536-14 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
- ASTM E2536-15 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
- ASTM E2536-15a Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
- ASTM ISO/ASTM51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
- ASTM E2867-14(2019) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
- ASTM D8293-22 Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
- ASTM D7366-08(2019) Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
- ASTM E2536-09 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
- ASTM D7440-23 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
- ASTM E2867-13 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
- ASTM D7366-08(2013) Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
- ASTM D7366-08 Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
- ASTM E2867-14(2023) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
- ASTM D8215-20 Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
- ASTM D8215-19 Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
- ASTM D8215-18 Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
- ASTM D8215-19a Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
- ASTM G213-17 Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
- ASTM G213-17(2023) Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
- ASTM E2867-14 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
- ASTM F2605-08e1 Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
- ASTM F2605-08 Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
- ASTM F2602-08e1 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
- ASTM F2605-16 Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
- ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM E2554-18 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
- ASTM E2554-18e1 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
- ASTM E2554-13 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
- ASTM F2602-08 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
- ASTM F2602-13 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection lpar;SEC-MALSrpar;
- ASTM F2602-18 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
European Committee for Standardization (CEN), Moore's uncertainty
- EN ISO 25377:2022 Hydrometric uncertainty guidance (HUG) (ISO 25377:2020)
- PD CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
- CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
- EN ISO 19036:2019 Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations (ISO 19036:2019)
- EN 12603:2002 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
- EN ISO/TS 16491:2012 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests
- EN ISO 12999-1:2020 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2020)
- EN ISO 12999-2:2020 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound absorption (ISO 12999-2:2020)
- CEN ISO/TS 15530-1:2013 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics
- EN ISO 12999-1:2014 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
- EN ISO 6789-2:2017 Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainly (ISO 6789-2:2017)
- EN ISO 6974-1:2001 Natural Gas - Determiantion of Composition with Defined Uncertainty by Gas Chromatography - Part 1: Guidelines for Tailored Analysis ISO 6974-1:2000
- prEN ISO 6789-2 rev Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty
- EN ISO 6974-2:2002 Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 2: Measuring-System Characteristics and Statistics for Processing of Data
CH-SNV, Moore's uncertainty
Professional Standard - Energy, Moore's uncertainty
- NB/T 42023-2013 Handling of Measurement Uncertainties in Testing Data
- NB/Z 20326-2014 Analysis methodology for uncertainty of setpoints for instrumentation of safety system in nuclear power plants
General Motors do Brasil, Moore's uncertainty
- GMSA LTP.PE.103-2011 Procedure for determining colorfastness to rubbing of textiles and coated plastics Determina莽茫o de transfer锚cia de car por atrito de materiais t锚xteis e pl谩sticos Do Not use on New Programs; No Replacement
- GMSA LTP.PE.107-2011 Procedure for determining softness of trim materials Determina莽茫o da maciez de materiais de acabamento Do Not use on New Programs; No Replacement
- GMSA LTP.EM.125-2011 Procedure for determining thickness of trim materials Determina莽茫o da espessura de materiais de acabamento Do Not use on New Programs; No Replacement
- GMSA LTP. EM.127-2011 Test method for determining temperature stability of trim materials Determina莽茫o da estabilidade dimensional de materiais de acabamento Do Not use on New Programs; No Replacement
- GMSA LTP.PE.105-2011 Procedure for determining the seam strength of upholstery trim materials Determina莽茫o da resist锚ncia de costura de materiais de acabamento Do Not use on New Programs; No Replacement
International Electrotechnical Commission (IEC), Moore's uncertainty
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Moore's uncertainty
- GB/T 27430-2022 Role of measurement uncertainty in conformity assessment
- GB/Z 24987-2010 Paper,board and pulps-
Estimation of uncertainty for test methods
- GB/Z 22553-2010 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
- GB/T 6113.402-2022 Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-2:Uncertainties,statistics and limit modelling—Measurement instrumentation uncertainty
- GB/T 6113.402-2006 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-2: Uncertainties, statistics and limit modelling.Measurement instrumentation Uncertainty
- GB/Z 6113.401-2007 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-1:Uncertainties,statistics and limit modelling.Uncertainties in standardized EMC tests
- GB/Z 6113.401-2018 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-1:Uncertainties,statistics and limit modelling.Uncertainties in standardized EMC tests
- GB/T 24635.3-2009 Geometrical Product Specification(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3: Use of calibrated workpieces or standards
- GB/T 29820.1-2013 Assessment of uncertainty in calibration and use of flow measurement devices.Part 1:Linear calibration relationships
- GB/Z 6113.403-2007 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-3:Uncertainties,statistics and limit modelling.Statistical considerations in the determination of EMC compliance of mass-produced
- GB/Z 6113.403-2020 Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-3:Uncertainties,statistics and limit modelling—Statistical considerations in the determination of EMC compliance
ES-UNE, Moore's uncertainty
- UNE-EN ISO 26082-1:2020 Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO 26082-1:2019)
- UNE-EN ISO 12999-1:2021 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2020)
- UNE-EN ISO 12999-2:2021 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound absorption (ISO 12999-2:2020)
- UNE-EN ISO 19036:2020 Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations (ISO 19036:2019)
- EN IEC 60076-19-1:2023 Power transformers - Part 19-1: Rules for the determination of uncertainties in the measurement of the losses of power transformers
- UNE-EN 60076-19:2016 Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
- UNE-EN ISO 6789-2:2019 Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017)
Society of Automotive Engineers (SAE), Moore's uncertainty
- SAE AIR5925-2007 Measurement Uncertainty Applied to Cost-Effective Testing
- SAE AIR4979-2004 Estimation of Measurement Uncertainty in Engine Tests Based on NATO AGARD Uniform Engine Test Program
- SAE AIR4979-1996 Estimation of Measurement Uncertainty in Engine Tests Based on NATO AGARD Uniform Engine Test Program
Standard Association of Australia （SAA）, Moore's uncertainty
AGMA - American Gear Manufacturers Association, Moore's uncertainty
- 99FTM3-1999 Measurement Uncertainty for Pitch and Runout Artifacts
- 05FTM04-2005 Tooth Meshing Stiffness Optimisation Based on Gear Tooth Form Determination for a Production Process Using Different Tools
- ISO 1328-2:1999 Cylindrical Gears - ISO System of Accuracy - Part 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information
Professional Standard - Aerospace, Moore's uncertainty
- QJ 1275-1994 Evaluation of Measurement Uncertainty of Solid Rocket Motor
- QJ 1275-1987 Evaluation of Measurement Uncertainty of Solid Rocket Motor
National Metrological Technical Specifications of the People's Republic of China, Moore's uncertainty
- JJF(铁道) 602-2004 Uncertainty in Measurement for Special Measuring Standards of Railway
- JJF 1130-2005 Guide to the Estimation of Uncertainty in Calibration of Geometrical Measuring Equipment
未注明发布机构, Moore's uncertainty
- BS EN ISO 20988:2007(2010) Air quality — Guidelines for estimating measurement uncertainty
- ASME MFC-2M-1983 Uncertainty in liquid flow measurements in sealed pipes
- BS EN IEC 60076-19-1:2023 Power transformers Part 19 - 1 : Rules for the determination of uncertainties in the measurement of the losses on power transformers
- DIN EN ISO 6974-1:2002 Natural gas — Determination of composition with defined uncertainty by gas chromatograph — Part 1: Guidelines for tailored analysis
- BS ISO 11222:2002(2007) Air quality — Determination of the uncertainty of the time average of air quality measurements
- JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
- BS EN ISO 6974-6:2008(2009) Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6 : Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
国家市场监督管理总局、中国国家标准化管理委员会, Moore's uncertainty
- GB/T 24635.4-2020 Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation
- GB/T 24635.1-2020 Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 1: Overview and metrological characteristics
- GB/T 27419-2018 Guide to the evaluation and expression of uncertainty in measurement—Supplement 1: Propagation of distributions using a Monte Carlo method
- GB/T 39643-2020 Geometrical product specifications (GPS)—Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
- GB/T 39853.2-2021 Power quality measurement in power supply systems—Part 2: Functional tests and uncertainty requirements
Indonesia Standards, Moore's uncertainty
Alliance of Telecommunications Industry Solutions （ATIS), Moore's uncertainty
- ATIS 0500004-2005 Recommendation for the Use of Confidence and Uncertainty for Wireless Phase 2
ATIS - Alliance for Telecommunications Industry Solutions, Moore's uncertainty
- 0500004-2005 Recommendation for the Use of Confidence and Uncertainty for Wireless Phase 2
American Society of Mechanical Engineers (ASME), Moore's uncertainty
- ASME PTC 19.1-1985 Instruments and apparatus - Part 1: Measurement uncertainty
- ASME PTC 6R-1985 Guidance for Evaluation of Measurement Uncertainty in Performance Tests of Steam Turbines
- ASME B89.7.3.3-2002 Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements
- ASME B89.7.3.1-2001 Guidelines for Decision Rules: Considering Measurement Uncertainty in Determining Conformance to Specifications
- ASME PTC 6 REPORT-1985 Guidance for Evaluation of Measurement Uncertainty in Performance Tests of Steam Turbines R(1997)
American Gear Manufacturers Association, Moore's uncertainty
ECMA - European Association for Standardizing Information and Communication Systems, Moore's uncertainty
- ECMA 181-1992 Uncertainty of Measurement as Applied to Type Approval of Products
SAE - SAE International, Moore's uncertainty
- SAE AIR5925A-2013 Measurement Uncertainty Applied to Cost-Effective Testing
- SAE J/ISO 6014:2003 Earth-moving machinery Determination of ground speed (This document is no longer maintained by SAE)
International Commission on Illumination (CIE), Moore's uncertainty
- CIE 198-SP1.1-2011 DETERMINATION OF MEASUREMENT UNCERTAINTIES IN PHOTOMETRY SUPPLEMENT 1: MODULES AND EXAMPLES FOR THE DETERMINATION OF MEASUREMENT UNCERTAINTIES Part 1: Modules for the Construction of Measurement Equations
- CIE 198-SP1.3-2011 DETERMINATION OF MEASUREMENT UNCERTAINTIES IN PHOTOMETRY SUPPLEMENT 1: MODULES AND EXAMPLES FOR THE DETERMINATION OF MEASUREMENT UNCERTAINTIES Part 3: Examples for the Solving of Systems of Equations
- CIE X029-2006 PROCEEDINGS of the 2nd CIE Expert Symposium on Measurement Uncertainty
- CIE X020-2001 Proceedings of the CIE Expert Symposium 2001 on Uncertainty Evaluation Methods for Analysis of Uncertainties in Optical Radiation Measurement
Lithuanian Standards Office , Moore's uncertainty
- LST EN ISO 26082-1:2012 Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO 26082-1:2012)
- LST EN ISO 12999-1:2021 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2020)
- LST EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
- LST EN ISO 14956:2004 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002)
IT-UNI, Moore's uncertainty
- EC 1-2021 UNI EN ISO 19036:2021 Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations
- UNI ISO 19685:2020 Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for Pirani gauges
- UNI ISO 20146:2020 Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
IX-ISO/IEC, Moore's uncertainty
- ISO/IEC GUIDE 98-3-SP1:2008 Supplement 1 - Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) - Propagation of distributions using a Monte Carlo method
- ISO/IEC GUIDE 98-3-SP2:2011 Supplement 2 - Uncertainty of measurement -- Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) - Extension to any number of output quantities
Professional Standard - Certification and Accreditation, Moore's uncertainty
- RB/T 151-2016 Guidelines for the estimation of measurement uncertainty of food microbiological quantitative detection
US-CLSI, Moore's uncertainty
- CLSI C51-A-2012 Expression of Measurement Uncertainty in Laboratory Medicine; Approved Guideline
ES-AENOR, Moore's uncertainty
- UNE 40-410-1986
- UNE 55-725-1987
- UNE 112-015-1994 Biological corrosion. Experimental method for pit potential determination in stainless steel, using sulfate reducing bacteria cultures by means of the potentiodynamic anodic polarization technique
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Moore's uncertainty
- ASHRAE AC-02-15-2-2002 Uncertainty in the Design Length Calculation for Vertical Ground Heat Exchangers
- ASHRAE LO-09-064-2009 Experimental Measurement and Uncertainty Analysis on the Energy Performance of a Chilled Water Cooling Coil
- ASHRAE OR-16-C080-2016 Minimizing Data Reduction Uncertainty during Heat-Transfer Equipment Testing
- ASHRAE 4593-2002 Uncertainty Analysis of the Experimental Results Investigating the Effects of Turbulence Intensity on the Performance of Rotating Vane Anemometers (RP-986)
ZA-SANS, Moore's uncertainty
- SANS 216-4-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Moore's uncertainty
- GB/T 6113.402-2018 Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-2:Uncertainties, statistics and limit modelling—Measurement instrumentation uncertainty
- GB/T 34881-2017 Geometrical product specifications (GPS)—Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
- GB/T 34876-2017 Vacuum technology—Vacuum gauges—Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
Institute of Electrical and Electronics Engineers (IEEE), Moore's uncertainty
- IEEE/IEC P61869-105 IEEE/IEC Draft Recommended Practice for Uncertainty Evaluation in the Calibration of Instrument Transformers
- ANSI C63.23-2012 American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Moore's uncertainty
- IEEE P61869-105/D1-2018 IEEE/IEC Draft Recommended Practice for Uncertainty Evaluation in the Calibration of Instrument Transformers
未注明发布机构, Moore's uncertainty
- BS EN ISO 20988:2007(2010) Air quality — Guidelines for estimating measurement uncertainty
- ASME MFC-2M-1983 Uncertainty in liquid flow measurements in sealed pipes
- BS EN IEC 60076-19-1:2023 Power transformers Part 19 - 1 : Rules for the determination of uncertainties in the measurement of the losses on power transformers
- DIN EN ISO 6974-1:2002 Natural gas — Determination of composition with defined uncertainty by gas chromatograph — Part 1: Guidelines for tailored analysis
- BS ISO 11222:2002(2007) Air quality — Determination of the uncertainty of the time average of air quality measurements
- JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
- BS EN ISO 6974-6:2008(2009) Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6 : Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
ETSI - European Telecommunications Standards Institute, Moore's uncertainty
- TR 102 273-1-2-2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (Using Test Site) and Evaluation of the Corresponding Measurement Uncertainties; Part 1: Uncertainties in the Measurement of Mobile Radio Equipm
- ETR 273-1-1-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of Radiated Methods of Measurement (Using Test Sites) and Evaluation of the Corresponding Measurement Uncertainties; Part 1: Uncertainties in the Measurement of Mobile Radio Equip
- ETR 273-1-2-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of Radiated Methods of Measurement (Using Test Sites) and Evaluation of the Corresponding Measurement Uncertainties; Part 1: Uncertainties in the Measurement of Mobile Radio Equip
- ETR 028-1992 Radio Equipment and Systems (RES); Uncertainties in the Measurement of Mobile Radio Equipment Characteristics
- ETR 028-1994 Radio Equipment and Systems (RES); Uncertainties in the Measurement of Mobile Radio Equipment Characteristics (2nd Edition)
IETF - Internet Engineering Task Force, Moore's uncertainty
- RFC 7459-2015 Representation of Uncertainty and Confidence in the Presence Information Data Format Location Object (PIDF‐LO)
ESD - ESD ASSOCIATION, Moore's uncertainty
- TR14.0-01-2000 Calculation of Uncertainty Associated with Measurement of Electrostatic Discharge (ESD) Current (Formerly TR07-00)
AT-ON, Moore's uncertainty
- OENORM EN ISO 12999-1:2021 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2020)
PL-PKN, Moore's uncertainty
- PN-EN ISO 12999-2-2021-01 E Acoustics -- Determination and application of measurement uncertainties in building acoustics -- Part 2: Sound absorption (ISO 12999-2:2020)
- PN-EN ISO 12999-1-2021-05 E Acoustics -- Determination and application of measurement uncertainties in building acoustics -- Part 1: Sound insulation (ISO 12999-1:2020)
IEC - International Electrotechnical Commission, Moore's uncertainty
- CISPR/TR 16-4-1 AMD 2-2007 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties@ statistics and limit modelling – Uncertainties in standardized EMC tests (Edition 1.1)
- CISPR/TR 16-4-1-2005 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties@ statistics and limit modelling – Uncertainties in standardized EMC tests (Edition 1.1; Consolidated Reprint)
IX-CISPR, Moore's uncertainty
- CISPR 16-4-2:2011/AMD2:2018/COR1:2019 Corrigendum 1 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
BE-NBN, Moore's uncertainty
- NBN-ISO 7066-1:1990 Schatting van de onnauwkeurigheden bij net ijken en het gebruik van debietmeetinstrumenten - Deel 1 : Lineaire ijkingsverhoudingen