ZH
RU
ES

True Density Principle

True Density Principle, Total:496 items.

In the international standard classification, True Density Principle involves: Refractories, Fuels, Coals, Measurement of volume, mass, density, viscosity, Vacuum technology, Metalliferous minerals, Tobacco, tobacco products and related equipment, Products of the chemical industry, Protection against fire, Metrology and measurement in general, Conducting materials, Construction materials, Insulating fluids, Organic chemicals, Crude petroleum, Ceramics, Plastics, Analytical chemistry, Welding, brazing and soldering, Petroleum, petroleum products and natural gas handling equipment, Petroleum products in general, Protection against dangerous goods, Vocabularies, Applications of information technology, Earthworks. Excavations. Foundation construction. Underground works, Road engineering, Electronic tubes, Mining and quarrying, Materials for aerospace construction, Soil quality. Pedology, Pulps, Raw materials for rubber and plastics, Particle size analysis. Sieving, Waxes, bituminous materials and other petroleum products, Materials for the reinforcement of composites, Ferrous metals, Equipment for petroleum and natural gas industries, Electrical engineering in general, Protection of and in buildings, Thermodynamics and temperature measurements, Powder metallurgy, Agricultural machines, implements and equipment, Wood, sawlogs and sawn timber, Fruits. Vegetables, Beverages, Textile fibres, Pharmaceutics, Road vehicles in general, Products of the textile industry, Linear and angular measurements, Rubber, Nuclear energy engineering, Non-ferrous metals, Testing of metals, Semiconducting materials, Quality, Lubricants, industrial oils and related products, Leather technology, Iron and steel products, Test conditions and procedures in general, Farming and forestry, Installations in buildings, Glass, Wastes.

RU-GOST R, True Density Principle

GOST R 56300-2014 Refractories and refractory raw materials. Methods of true density determination
GOST 2160-2015 Solid mineral fuel. Determination of true and apparent density
GOST 8066-1977 Black powders. Real density determination method
GOST ISO 5017-2014 Dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
GOST R 51069-1997 Crude petroleum and petroleum products. Determination of density, relative density and API gravity. Hydrometer method
GOST 2409-2014 Refractories. Method for determination of bulk density, apparent and true porosity, water absorption
GOST 2409-1980 Refractory materials and articles. Method of water absorption, bulk density, apparent and true porosities determination
GOST 2211-1965 Refractories and refractory raw materials. Method of true density determination
GOST 32763-2014 Automobile roads of general use. Mineral powder. The method of determining the true density
GOST 33364-2015 Crude petroleum and liquid petroleum products. Determination of density, relative density and API gravity by hydrometer
GOST 32821-2014 Automobile roads of general use. Rubble and sand slag. The definition of true density and porosity
GOST 32722-2014 Automobile roads of general use. Natural and crushed sand. Determination of the true density
GOST R 51619-2000 The alcohol production and raw material for it producing. Method for determination of relative density
GOST 24027.1-1980 Methods for determination of authenticity, granary pest infestation, crushing and admixtures content
GOST 33057-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Definition of average and true density, porosity and water absorption
GOST 3812-1972 Textile materials. Textile fabrics and piece-articles. Methods for determination of density of threads and pile bunches
GOST R ISO 3675-2007 Crude petroleum and liquid petroleum products. Laboratory hydrometer method for determination of density

YU-JUS, True Density Principle

JUS B.D8.302-1984 Refractories. Methods of fisical testing. Determination of true density refractorl products and raw materials
JUS B.D8.312-1983 Refractories. Methods of fisical testing. Determination of the bulk deniity, apparent porosity and true porosity of dense shaped refractory products
JUS B.H8.351-1987 Methods of analysis of coal andcoke. Determination of the true relative density, the apparent relative densi-ty and the p orosity of coke
JUS B.E8.300-1989 Glass. Viscosity and viscometric fixed points. Principies for detarmining viscosity and viscometric fixed points

Taiwan Provincial Standard of the People's Republic of China, True Density Principle

CNS 11121-1984 Method for Determination of True Relative Density, Apparent Relative Density and Porosity of Coke
CNS 620-1998 Method for determination of true density of refractory materials
CNS 13529.1-1995 Banking - Procedures for Message Encipherment (Wholesale) Part 1: General Principles
CNS 13529-1-1995 Banking - Procedures for Message Encipherment (Wholesale) Part 1: General Principles

Standard Association of Australia （SAA）, True Density Principle

AS 1774.6:2001 Refractories and refractory materials - Physical test methods - Determination of true density
AS 1774.6:2001(R2013)
AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode
AS/NZS 2891.14.1.1:1996 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Direct transmission mode
AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge
AS/NZS 2891.14.4:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear surface moisture-density gauge - Backscatter mode
AS 2805.6.1.1:2009
AS 2805.6.1.1:2009/Amdt 1:2011
AS/NZS 2891.14.3:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear thin-layer density gauge using standard blocks
AS 1774.5:2014 Refractories and refractory materials — Physical test methods, Method 5: Determination of bulk density, apparent porosity and true porosity (ISO 5017:2013, MOD)

ZA-SANS, True Density Principle

SANS 5072:2005 Brown coals and lignites - Determination of true relative density and apparent relative density
SANS 1014:1985 Coke - Determination of true relative density, apparent relative density and porosity
SANS 5901:1978 True relative density of refractory materials (Pycnometer method)

German Institute for Standardization, True Density Principle

DIN 66137-1:2003 Determination of solid state density - Part 1: Principles
DIN 66137-1:2019-03 Determination of solid state density - Part 1: Principles
DIN EN ISO 3675:1999 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998); German version EN ISO 3675:1998
DIN EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003
DIN EN 993-2:1995-04 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995
DIN EN 1936:2007-02 Natural stone test method - Determination of real density and apparent density, and of total and open porosity; German version EN 1936:2006
DIN 66111:1989 Particle size analysis; sedimentation analysis; principles
DIN 66165-1:1987 Particle size analysis; sieve analysis; general principles
DIN EN ISO 12185:1997 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996); German version EN ISO 12185:1996
DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 993-2/A1:2004-01 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003
DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN EN ISO 12185:2022-11 Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor (ISO/DIS 12185:2022); German and English version prEN ISO 12185:2022 / Note: Date of issue 2022-10-07*Inten...
DIN 66118:1984 Particle size analysis; size analysis by air classification; fundamentals
DIN EN 993-1:1995 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity; German version EN 993-1:1995
DIN 66165-1:2016 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
DIN EN ISO 12185:1997-11 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996); German version EN ISO 12185:1996 / Note: To be replaced by DIN EN ISO 12185 (2022-11).
DIN EN 993-1:2019 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity
DIN EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004); German version EN ISO 3838:2004
DIN EN 1094-4:1995-09 Insulating refractory products - Part 4: Determination of bulk density and true porosity of shaped products; German version EN 1094-4:1995
DIN EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN EN ISO 2420:2003 Leather - Physical and mechanical tests - Determination of apparent density (ISO 2420:2002); German version EN ISO 2420:2002
DIN EN 678:1994 Determination of the dry density of autoclaved aerated concrete; German version EN 678:1993
DIN ISO 7884-1:1998 Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points (ISO 7884-1:1987)
DIN EN ISO 3675:1999-11 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998); German version EN ISO 3675:1998

Association Francaise de Normalisation, True Density Principle

NF E29-720:1974 Vacuum technology. High vacuum connections. Basic principles.
NF M03-039*NF ISO 1014:2004 Coke - Determination of true relative density, apparent relative density and porosity.
NF M03-039:1982 SOLID FUELS. COKE. DETERMINATION OF TRUE RELATIVE DENSITY,APPARENT RELATIVE DENSITY AND POROSITY.
NF M01-018*NF ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
NF T60-101*NF EN ISO 3675:1998 Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method.
NF EN 12697-5:2018 Mélanges bitumineux - Méthodes d'essai - Partie 5 : masse volumique réelle (MVR)
NF B40-318*NF ISO 5017:2013 Dense shaped refractory products - Determination of bulk density, apparent porosity and true porosity
NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
NF B40-301*NF EN 993-2:1995 Methods of test for dense shaped refractory products. Part 2 : determination of true density.
NF X31-502:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Densitomètre à membrane.
NF T45-012:1973 Raw materials for the elastomer industry. Petroleum plasticisers. Determination of density-viscosity.
NF EN 1097-7:2022 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 7 : détermination de la masse volumique réelle du filler - Méthode au picnomètre
NF EN IEC 62858:2019 Densité de foudroiement basée sur des systèmes de localisation des éclairs - Principes généraux
NF EN 14049:2004 Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
NF B40-344*NF EN 1094-4:1995 Insulating refractory products. Part 4 : determination of bulk density and true porosity.
NF EN 993-18:2002 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 18 : détermination de la masse volumique apparente des matériaux en grains par la méthode à l'eau sous vide
NF EN 993-17:1999 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 17 : détermination de la masse volumique apparente des matériaux en grains par la méthode au mercure sous vide.
NF T60-172*NF EN ISO 12185:1996 Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method.
NF T25-008*NF ISO 15100:2001 Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density
NF C17-858*NF EN 62858:2016 Lightning density based on lightning location systems (LLS) - General principles
NF EN ISO 12185:1996 Pétroles bruts et produits pétroliers - Détermination de la masse volumique - Méthode du tube en U oscillant.
NF U51-470*NF EN 14049:2004 Water application intensity - Calculation principles and measurement methods
NF T45-011:1973 Raw materials for the elastomer industry. Petroleum plasticisers. Determination of the refraction constituent. Density.
NF B40-340*NF EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum
NF B40-321*NF EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1 : determination of bulk density, apparent porosity and true porosity
NF T60-180*NF EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
NF K19-100:1997 Banking. Key management by means of asymmetric algorithms. Part 1 : principles, procedures and formats.
NF K19-027:1992 Banking. Procedures for message encipherment (wholesale). Part 1 : general principles.
NF T60-180:1996 Crude petroleum and liquid or solid petroleum products. Determination of density or relative density. Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods.
NF EN 1094-4:1995 Produits réfractaires isolants - Méthodes d'essai - Partie 4 : détermination de la masse volumique apparente et de la porosité réelle.
NF G52-011:2003 Leather - Physical and mechanical tests - Determination of apparent density.
NF B40-321:1995 Methods of test for dense shaped refractory products. Part 1 : determination of bulk density, apparent porosity and true porosity.

Professional Standard - Coal, True Density Principle

MT 39-1987 Method for Determination of True Density of Rock
MT/T 39-1987 Method for Determination of True Density of Rock
MT/T 713-1997 Determination of true density for mine dust

Professional Standard - Petrochemical Industry, True Density Principle

SH/T 0033-1990 Determination of true density of petroleum coke
SH/T 0604-2000 Crude petroleum and petroleum products.Determination of density.Oscillating U-tube Method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, True Density Principle

GB/T 24586-2009 Iron ores.Determination of apparent density，true density and porosity
GB/T 6155-2008 Carbon materials-Determination of the true density or porosity
GB/T 9966.3-2020 Test methods for natural stone—Part 3:Determination of water absorption,bulk density,true density and true porosity
GB/T 5071-1997 Refractory materials--Determination of true density
GB/T 217-1996 Determination of true relative density of coal
GB/T 217-2008 Determination of true relative density of coal
GB/T 5071-2013 Refractory materials.Determination of true density
GB/T 4511.4-1984 Coke--Determination of true relative density
GB/T 6155-1985 Carbon materials--Determination of the true density
GB/T 24203-2009 Carbon materials.Determination of the true density or true poroous.Boiling method
GB/T 4511.1-2008 Coke.Determination of true relative density apparent relative density and porosity
GB/T 9966.3-2001 Test methods for natural facing stones Part 3: Test methods for bulk density,true density,true porosity and water absorption
GB/T 8330-2008 Determination of specific gravity of ion exchange resins in wet state
GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state
GB/T 17764-2008 Hydrometers.Principles of construction and adjustment
GB/T 1884-2000 Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method
GB/T 23561.2-2009 Methods for determining the physical and mechanical properties of coal and rock.Part 2:Methods for determining the true density of coal and rock
GB/T 2997-2015 Test method for bulk density,apparent porosity and true porosity of dense shaped refractory products
GB/T 2997-2000 Test method for bulk density,apparent porosity and true porosity of dense shaped refractory products
GB/T 17764-1999 Principles of construction and adjustment of glass hydrometers
GB/T 2998-2015 Test method for bulk density and true porosity of shaped heat insulating refractory products
GB/T 2998-2001 Shaped insulating refractory products-Determination of bulk density and true porosity
GB/T 22594-2018 Water treatment chemicals.General rules for determination of density
GB/T 22594-2008 Water treatment reagent.General rules for the determination of density
GB/T 6692-2006 Resin finishing agent.Determination of relative density
GB/T 27909.1-2011 Banking.Key management (retail).Part 1:Principles
GB/T 3256.5-1982 Chemical analysis of zirconium powder for electro-vacuum uses--The atomic absorption spectrophotometric method for determination of calcium and magnesium
GB/T 4193-1984 Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuum tubes
GB/T 13377-1992 Crude petroleum and liquid or solid petroleum products--Determination of density or relative density--Capillary stoppered pyknometer and graduated bicapillary pyknometer method
GB/T 13377-2010 Crude petroleum and liquid or solid petroleum products.Determination of density or relative density.Capillary stoppered pyknometer and graduated bicapillary pyknometer methods
GB/T 24240-2009 Direct reduced iron.Determination of apparent density and water absorption of hot briquetted iron(HBI)

Professional Standard - Tobacco, True Density Principle

YC/T 473-2013 Determination of apparent density,true density and inner pore volume of cut tobacco

National Aeronautics and Space Administration (NASA), True Density Principle

NASA-TN-D-8151-1976 Fundamentals of fluid sealing

CZ-CSN, True Density Principle

CSN ISO 5018:1994 Refractory materials.Determination of true density
CSN 44 1322 ZZ1-2001
CSN 01 3622-1981 Graphical symbols. Construction elements of vacuum equipments
CSN 44 1322-1993 Solid minerál fuels. Determination of true relatíve density
CSN 72 7018-1970 Determination of apparent density of raw ceramic materials
CSN 72 6021-1980 Determination of bulk density and true porpsity. of insulating refractory pro- duots
CSN 72 5010-1988 Determination of water absorptivity, apparent and true porosity, bulk density and apparent density solid density of fired ceramic materials and products
CSN ISO 5016:1994 Shaped insulating refractory products.Determination of bulk density and true porosity
CSN 49 0108-1979 Determination of the den ?ity of the physical and mechanieal testing.
CSN 64 0805-1966 Determination of apparent density f moulding materials lhát cannot e poured írora a funncl
CSN 72 5010 Za-1978
CSN ISO 7884-1:1992 Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points

Lithuanian Standards Office , True Density Principle

LST ISO 5018:1998 Refractory materials. Determination of true density
LST EN 993-2-2001 Methods of test for dense shaped refractory products - Part 2: Determination of true density
LST EN 993-2-2002/A1-2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
LST EN 1936-2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
LST EN 1094-4-2001 Insulating refractory products - Part 4: Determination of bulk density and true porosity
LST EN 14049-2004 Water application intensity - Calculation principles and measurement methods
LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
LST EN 993-1-2001 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity
LST EN 772-4-2000 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
LST EN ISO 12185:1999 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)

International Organization for Standardization (ISO), True Density Principle

ISO/FDIS 5725-1 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 5072:2021 Brown coals and lignites — Determination of true relative density and apparent relative density
ISO 1014:1985 Coke; Determination of true relative density, apparent relative density and porosity
ISO 1014:1975 Coke — Determination of true relative density, apparent relative density and porosity
ISO 1014:2021 Coke — Determination of true relative density, apparent relative density and porosity
ISO 1014:1985/Cor 1:1994 Coke - Determination of true relative density, apparent relative density and porosity; Technical Corrigendum 1
ISO 387:1977 Hydrometers; Principles of construction and adjustment
ISO 3675:1993 Crude pertroleum and liquid petroleum products; laboratory determination of density or relative density; hydrometer method
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
ISO 5017:1988 Dense shaped refractory products; determination of bulk density, apparent porosity and true porosity
ISO 5017:1998 Dense shaped refractory products - Determination of bulk density, apparent porosity and true porosity
ISO 5017:2013 Dense shaped refractory products - Determination of bulk density, apparent porosity and true porosity
ISO/PRF 5725-3 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
ISO 5725-3:2023 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
ISO 3675:1976 Crude petroleum and liquid petroleum products — Laboratory determination of density or relative density — Hydrometer method
ISO 11568-1:2005 Banking - Key management (retail) - Part 1: Principles
ISO 15100:2000 Plastics - Reinforcement fibres - Chopped strands; Determination of bulk density
ISO 15968:2000 Direct reduced iron - Determination of apparent density and water absorption of hot briquetted iron (HBI)
ISO 3131:1975 Wood; Determination of density for physical and mechanical tests
ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
ISO 5725-1:2023 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
ISO 3838:1983 Crude petroleum and liquid or solid petroleum products; Determination of density or relative density; Capillary-stoppered pyknometer and graduated bicapillary pycnometer methods
ISO 19935-1:2018 Plastics - Temperature modulated DSC - Part 1: General principles
ISO 15968:2016 Direct reduced iron - Determination of apparent density and water absorption of hot briquetted iron (HBI)
ISO 2420:2002 Leather - Physical and mechanical tests - Determination of apparent density
ISO 2420:2002 | IULTCS/IUP 5 Leather — Physical and mechanical tests — Determination of apparent density
ISO 7884-1:1987 Glass; Viscosity and viscometric fixed points; Part 1 : Principles for determining viscosity and viscometric fixed points
ISO/DIS 12185 Crude petroleum, petroleum products and related products — Determination of density — Oscillating U-tube method
ISO/FDIS 12185:2023 Crude petroleum, petroleum products and related products — Determination of density — Oscillating U-tube method

IN-BIS, True Density Principle

ES-AENOR, True Density Principle

UNE 103-301-1994 Determination of a soil density. Method de balance witch water bath
UNE 84-065-1988
UNE 104-281 Pt.1-2-1986

NL-NEN, True Density Principle

NEN 2585-1983 Refractory products - Determination of true density of shaped and unshaped products and raw materials
NEN 2620-1982 Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity

Korean Agency for Technology and Standards (KATS), True Density Principle

KS E ISO 1014-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS E ISO 5072-2009(2019) Brown coals and lignites－Determination of true relative density and apparent relative density
KS E ISO 1014:2002 Coke-Determination of true relative density, apparent relative density and porosity
KS E ISO 1014:2022 Coke — Determination of true relative density, apparent relative density and porosity
KS B ISO 387:2007 Hydrometers-Principles of construction and adjustment
KS M 2002-2011 Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method
KS M 2002-1986 Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method
KS F 2495-2017 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS L ISO 5017:2013 Dense shaped refractory products ? Determination of bulk density, apparent porosity and true porosity
KS F 2496-2012 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS A ISO 5725-3-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 3：lntermediate measures of the precision of a standard measurement method
KS F 2495-2012 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS L ISO 5017-2013(2018) Dense shaped refractory products?Determination of bulk density, apparent porosity and true porosity
KS M 7055-1973(2002) TESTING METHOD FOR DENSITY OF PULPWOOD AND WOODCHIPS
KS F 2495-2017(2022) Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2496-2017 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS A ISO 5725-6-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 6：Use in practice of accuracy values
KS A ISO 5725-1-2012(2022) Accuracy(trueness and precision) of measurement methods and results－Part 1：General principles and definitions
KS M ISO 12185:2003 Crude petroleum and petroleum products－Determination of density－Oscillating U－tube method
KS F 2496-2017(2022) Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS E ISO 3852-2008(2018) Iron ores for blast furnace and direct reduction feedstocks－Determination of bulk density
KS C 5946-1995 Personal identification number management and security-Part 1:PIN protection principles and techniques
KS M ISO 3131-2002(2007) Wood－Determination of density for physical and mechanical tests
KS M ISO 12185-2003(2018) Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
KS M ISO 3838:2011 Crude petroleum and liquid or solid petroleum products－Determination of density or relative density－Capillary-stopped pyknometer and graduated bicapillary pyknometer methods
KS M ISO 3838-2011(2021) Crude petroleum and liquid or solid petroleum products —Determination of density or relative density — Capillary stopped pyknometer and graduated bicapillary pyknometer methods
KS M ISO 2420:2019 Leather－Physical and mechanical tests－Determination of apparent density
KS A ISO 5725-5-2012(2022) Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
KS E ISO 15968-2017(2022) Direct reduced iron－Determination of apparent density and water absorption of hot briquetted iron(HBI)
KS F 2347-2018 Standard test method for insite density of soil by the rubber-balloon method
KS M ISO 3675-2017(2022) Crude and liquid petroleum products － Laboratory determination of density － Hydrometer method
KS M ISO 3131:2012 Wood－Determination of density for physical and mechanical tests
KS M ISO 2420:2004 Leather－Physical and mechanical tests－Determination of apparent density
KS K ISO 1144:2012 Textiles－Universal system for designating linear density(Tex System)
KS E ISO 15968:2012 Direct reduced iron-Determination of apparent density and water absorption of hot briquetted iron(HBI)
KS E ISO 15968:2017 Direct reduced iron－Determination of apparent density and water absorption of hot briquetted iron(HBI)

British Standards Institution (BSI), True Density Principle

BS ISO 1014:2021 Coke. Determination of true relative density, apparent relative density and porosity
BS ISO 5072:2013 Brown coals and lignites. Determination of true relative density and apparent relative density
21/30423448 DC BS ISO 1014. Coke. Determination of true relative density, apparent relative density and porosity
BS EN 993-2:1995 Methods of test for dense shaped refractory products. Determination of true density
BS ISO 5072:2021 Tracked Changes. Brown coals and lignites. Determination of true relative density and apparent relative density
BS ISO 11568-1:2005 Banking - Key management (retail) - Principles
21/30362324 DC BS ISO 11568. Financial services. Key management (retail). Principles, symmetric ciphers and asymmetric cryptosystems, their key management and life cycle
BS ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks. Determination of bulk density
BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
BS ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results. Use in practice of accuracy values
BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
BS ISO 15100:2001 Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density
BS EN 62858:2015 Lightning density based on lightning location systems (LLS). General principles
BS EN IEC 62858:2019 Lightning density based on lightning location systems (LLS). General principles
BS ISO 11166-1:1994 Banking. Key management by means of asymmetric algorithms - Principles, procedures and formats
BS EN 14049:2003(2011) Water application intensity - Calculation principles and measurement methods
BS EN 14049:2003 Water application intensity - Calculation principles and measurement methods
BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
BS EN ISO 105-A01:1996 Textiles - Tests for colour fastness - General principles of testing
BS 903-A1:1996 Physical testing of rubber - Determination of density
BS EN ISO 3675:1998 Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method
BS EN 993-1:2018 Tracked Changes. Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
22/30461108 DC BS EN ISO 12185. Crude petroleum, petroleum products and related products. Determination of density. Laboratory density meter with an oscillating U tube sensor
BS EN ISO 105-A01:2010 Textiles - Tests for colour fastness - General principles of testing
BS ISO 5725-3:2023 Accuracy (trueness and precision) of measurement methods and results. Intermediate precision and alternative designs for collaborative studies
BS ISO 15968:2016 Direct reduced iron. Determination of apparent density and water absorption of hot briquetted iron (HBI)
18/30375589 DC BS EN 62858. Lightning density based on lightning location systems (LLS). General principles
BS ISO 5725-1:1995 Accuracy (trueness and precision) of measurement methods and results. General principles and definitions
BS EN ISO 2420:2003 Leather - Physical and mechanical tests - Determination of apparent density

AENOR, True Density Principle

UNE 82009-1:1998 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 1: GENERAL PRINCIPLES AND DEFINITIONS.
UNE-EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
UNE-EN 993-2:1996 Methods of test for dense shaped refractory products - Part 2: Determination of true density
UNE-EN 1936:2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
UNE 84065:1988 COSMETIC RAW MATERIALS. DETERMINATION OF APPARENT DENSITY OF POWDERS
UNE 82009-4:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.
UNE-EN 1094-4:1996 Insulating refractory products - Part 4: Determination of bulk density and true porosity
UNE 82009-6:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 6: USE IN PRACTICE OF ACCURACY VALUES.
UNE-EN 14049:2005 Water application intensity - Calculation principles and measurement methods
UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
UNE-EN 993-1:1996 METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 1: DETERMINATION OF BULK DENSITY, APPARENT POROSITY AND TRUE POSORITY.
UNE 82009-3:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE 103900:2013 In situ determination of density and moisture content of soil and granular materials by nuclear methods: low depths.
UNE-EN ISO 12185:1999 CRUDE PETROLEUM AND PETROLEUM PRODUCTS. DETERMINATION OF DENSITY. OSCILLATING U-TUBE METHOD (ISO 12185:1996)
UNE 82009-5:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.

Professional Standard - Light Industry, True Density Principle

QB/T 1010-1999 Determination of True Density of Ceramic Material Pigments
QB/T 1010-2015 Test method for true density of ceramic material and pigment
QB/T 2715-2005 Leather-Physical and mechanical tests-Determination of apparent density

Danish Standards Foundation, True Density Principle

DS/ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
DS/EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density
DS/EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
DS/EN 1936:2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
DS/EN 1094-4:1996 Insulating refractory products - Part 4: Determination of bulk density and true porosity
DS/EN ISO 12185:1997 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
DS/EN 14049:2004 Water application intensity - Calculation principles and measurement methods
DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
DS/EN 993-1:1995 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity
DS/ISO 5725-1/Cor.1:2000 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
DS/EN 772-4:1999 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
DS/EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method
DS/EN ISO 2420:2003 Leather - Physical and mechanical tests - Determination of apparent density

KR-KS, True Density Principle

KS E ISO 1014-2022 Coke — Determination of true relative density, apparent relative density and porosity
KS E ISO 3852-2008(2023) Iron ores for blast furnace and direct reduction feedstocks－Determination of bulk density
KS M ISO 12185-2003(2023) Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
KS E ISO 15968-2017 Direct reduced iron－Determination of apparent density and water absorption of hot briquetted iron(HBI)
KS M ISO 2420-2019 Leather－Physical and mechanical tests－Determination of apparent density
KS F 2347-2018(2023) Standard test method for insite density of soil by the rubber-balloon method

CU-NC, True Density Principle

NC 82-05-5-1984 Wines. Testing Methods. Determination of Relatiy and Absolute Density
NC 54-312-1985 Construction Materials and Products Raw Materials for Ceramics. Determination of Density and Absorption

PT-IPQ, True Density Principle

NP 3757-1989 SOLID FUELS Cokes Determination of true relative density, apparent relative density and porosity
NP 1695-1980
NP EN ISO 12185:2000 Crude petroleum and petroleum products Determination of density Oscillating U-rude methods(ISO 12185-1996)

American Society for Testing and Materials (ASTM), True Density Principle

ASTM D5002-99 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-15 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-13 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D2840-69 Method of Test for Average True Particle Density of Hollow Microspheres
ASTM D6822-02 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D6822-12a Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D6822-12 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D6822-12b(2017) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D2638-21 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D2638-91(2002) Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D2638-91(1997) Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D1298-99 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-99e2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D129-64(1978) Standard Test Method for Sulfur In Petroleum Products (General Bomb Method)
ASTM D129-95 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
ASTM D1298-99(2005) Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-12b Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-12a Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-12 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D12-88(1998) Hydrometer method to determine the density, relative density and API fuel specific gravity of crude oil and liquid petroleum products
ASTM D2638-06 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D2638-10 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D5004-89(2004)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D6857-03 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-11 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-17 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857-09 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D5004-89(1999) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D2638-10(2015)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D6857/D6857M-18 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM B962-15 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
ASTM B962-08 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle
ASTM B962-13 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedesrsquo; Principle
ASTM B962-23 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
ASTM D5004-11 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-17 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-18 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D5004-89(2009) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM B962-14 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy 40;PM41; Products Using Archimedesrsquo; Principle
ASTM D6752-03e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-03 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-09 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6822-12b(2017)e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D1298-85(1990)e1 Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-99e1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D6822-12b Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D6822-02(2008) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D1298-12b(2017) Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D2950/D2950M-11 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
ASTM PS132-01 Standard Provisional Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method (Withdrawn 2003)

Professional Standard - Commodity Inspection, True Density Principle

SN/T 0482-1995 High-speed determination of true relative density,apparentrelative density and porosity of coke for export

Association of German Mechanical Engineers, True Density Principle

DVS 3201-2001
DVS 3201-2010 Fundamental principles for the designing of components for electron beam welding in fine and high vacuums
VDI/VDE 3511 Blatt 1-1996 Temperature measurement in industry - Principles and special methods of temperature measurement
DVS 2950-2010 Resistance welding in electronics and fine mechanics - Overview and fundamentals
VDI/VDE 3512 Blatt 1-2009 Temperature measurement for building automation - Basic principles
VDI/VDE 3512 Blatt 1-2017 Temperature measurement for building automation - Basic principles

轻工业部, True Density Principle

QB 1010-1991 Method for determination of true density of pigments for daily ceramic materials

European Committee for Standardization (CEN), True Density Principle

EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
EN ISO 11568-1:1996 Banking - Key Management (Retail) - Part 1. Introduction to Key Management (ISO 11568-1 : 1994)
EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
prEN 678-1992 Determination of the dry density of autoclaved aerated concrete
prEN ISO 12185 Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor (ISO/DIS 12185:2022)

International Commission on Illumination (CIE), True Density Principle

CIE 18.2-1983 Basis of Physical Photometry (E)
CIE 41-1978 Light as a True Visual Quantity: Principles of Measurement (1st Edition) (Reprint 1994) (E)

Natural Gas Processor's Association (NGPA), True Density Principle

GPA TP-2-1972 Liquid Densities of High-Ethane Raw Make Streams

未注明发布机构, True Density Principle

BS EN 993-2:1995(2004) Methods oftest for dense shaped refractory products — Part 2 : Determination oftrue density
BS EN 1936:2006(2007) Natural stone test methods — Determination of real density and apparent density, and of total and open porosity
BS ISO 3852:2007(2008) Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
BS ISO 5725-6:1994(2002) Accuracy (trueness and precision) of measurement methods and results — Part 6 : Use in practice of accuracy values
BS EN 1094-4:1995(1999) Insulating refractory products — Part 4 : Determination of bulk density and true porosity
BS 903-A1:1996(1998) Physical testing of rubber — Part A1 : Determination of density

Professional Standard - Water Conservancy, True Density Principle

SL 237-041-1999 Code for test of soil - in-situ density test

PL-PKN, True Density Principle

PN C04004-1990 Crude petrolcum and petroleum products Determination of density
PN H04172-1993 Refractory materials. Determination of bulk density and true porosity of insulating products
PN H04185-1992 Refractory materials. Determination of bulk density, apparent porosity, true porosity and water absorbability
PN P04754-1988 Jet-textured yarn of linear density belo w 1000 dtex Methods of tests

国家质量监督检验检疫总局, True Density Principle

SN/T 4432-2016 Determination of Density, Relative Density and API Gravity of Crude Oil and Liquid Petroleum Products Thermohydrometer Method

Professional Standard - Electron, True Density Principle

SJ/T 10943-1996 Test method for granulometric distribution of alundum powder for vacuum tubes - Density balance method
SJ 3199-1989 Method of analysis for Zinc-Lead in vacuum-Silicon Aluminium alloy by atomic absorption spectrophotometry

工业和信息化部, True Density Principle

SJ/T 10943-2020 Density balance method for determination of particle size distribution of corundum powder for electric vacuum devices

Professional Standard - Ferrous Metallurgy, True Density Principle

YB 4091-1992 Method for measuring true density of carbon materials (distilled water boiling method)

UNKNOWN, True Density Principle

YB 4091-92

Defense Logistics Agency, True Density Principle

DLA A-A-59119 VALID NOTICE 1-2003 LAPPING MACHINES, METAL WORKING, HIGH-PRECISION, FLAT SURFACE
DLA A-A-59119-1997 LAPPING MACHINES, METAL WORKING, HIGH-PRECISION, FLAT SURFACE

VN-TCVN, True Density Principle

TCVN 6530-2-1999 Refractories.Methods of test.Part 2: Determination of true density
TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments
TCVN 6910-1-2001 Accuracy (trueness and precision) of measurement methods and results.Part 1: General principles and definitions
TCVN 7119-2007 Leather.Physical and mechanical tests.Determination of apparent density

Indonesia Standards, True Density Principle

SNI ISO 5017:2010 Dense shaped refractory products - determination of bulk density, apparent porosity, and true porosity
SNI ISO 5016:2010 Shaped insulating refractory products - Determination of bulk density and true porosity
SNI 7593-2010

Japanese Industrial Standards Committee (JISC), True Density Principle

JIS P 8014:1994 Testing method for density of pulpwood and woodchips
JIS K 2249-2:2011 Crude petroleum and petroleum products -- Determination of density -- Part 2: Hydrometer method
JIS K 2249-4:2011 Crude petroleum and petroleum products -- Determination of density -- Part 4: Petroleum measurement tables
JIS K 2249:1995 Crude petroleum and petroleum products -- Determination of density and petroleum measurement tables based on a reference temperature (15 centigrade degrees)
JIS K 2249-1:2011 Crude petroleum and petroleum products -- Determination of density -- Part 1: Oscillating U-tube method
JIS Z 7302-1:1999 Densified refuse derived fuel -- Part 1: General principles of testing method
JIS K 2249-3:2011 Crude petroleum and petroleum products -- Determination of density -- Part 3: Capillary pyknometer method

GOSTR, True Density Principle

GOST 2211-2020 Refractories and refractory raw materials. Methods of true density determination
GOST 32081-2013 The alcohol production and raw material for it producing. Method for determination of relative density

RO-ASRO, True Density Principle

STAS 7264-1965
STAS 35-1981 CRUDE, OIL LIQUID SEMI-SOLID AND SOLID PETROLEUM PRODUCTS Detcrmination or density
STAS 7567-1966

Professional Standard - Energy, True Density Principle

NB/SH/T 0874-2013 Crude peroleum and liquid petroleum products.Laboratory determination of density.Weighing digital liquid density meter method

NZ-SNZ, True Density Principle

NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density
NZS 4402.5.1.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.1: Sand Replacement Method for the Determination of the In Situ Density

CH-SNV, True Density Principle

International Electrotechnical Commission (IEC), True Density Principle

IEC 61874:1998 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ("density logging")
IEC 62858:2015 Lightning density based on lightning location systems (LLS) - General principles
IEC 62858:2019 RLV Lightning density based on lightning location systems (LLS) - General principles
IEC 62858:2019 Lightning density based on lightning location systems (LLS) - General principles

HU-MSZT, True Density Principle

Professional Standard - Agriculture, True Density Principle

142兽药典三部-2015 Appendix Contents Physical Inspection Method 3103 Vacuum Determination Method
90药典四部-2015 0600 Determination of physical constants 0601 Determination of relative density
71药典四部-2020 0600 Determination of physical constants 0601 Determination of relative density

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, True Density Principle

GJB 5382.2-2005 Test methods of physical parameter for pyrotechnic. Part 2: Determination of density. Pyknometer method

Military Standard of the People's Republic of China-General Armament Department, True Density Principle

GJB 8683.2-2015 Test methods for physical parameters of pyrotechnics Part 2: Density determination density bottle method
GJBz 20058.2-1991(XG1-2015) Method for Determination of Physical Constants of Poisons - Determination of Density (Density Bottle Method) Modification Sheet 1-2015
GJB 1485-1992 Precision, accuracy and uncertainty of material physical property testing methods

UY-UNIT, True Density Principle

UNIT 160-1964

International Telecommunication Union (ITU), True Density Principle

ITU-T P.76-1988 DETERMINATION OF LOUDNESS RATINGS; FUNDAMENTAL PRINCIPLES
ITU-T P.76 FRENCH-1988 DETERMINATION OF LOUDNESS RATINGS; FUNDAMENTAL PRINCIPLES
ITU-T P.76 SPANISH-1988 DETERMINATION OF LOUDNESS RATINGS; FUNDAMENTAL PRINCIPLES

BE-NBN, True Density Principle

AT-ON, True Density Principle

ONORM L 1068-1988 Physical investigations ofsoil; determination ofsoil density

The American Road & Transportation Builders Association, True Density Principle

AASHTO T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method

AASHTO - American Association of State Highway and Transportation Officials, True Density Principle

T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 227-2002 Standard Method of Test for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

Society of Automotive Engineers (SAE), True Density Principle

SAE AMS5399C-2000 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
SAE AMS5399D-2018 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
SAE AMS5404A-2002 Alloy Castings, Investment, Corrosion and Heat Resistant 59Ni - 12.6Cr - 9.0Co - 1.9Mo - 4.2W - 4.0Ti - 4.2Ta - 3.4Al - 0.015B - 0.10Zr - 0.90Hf Vacuum Melted, Vacuum Cast Solution and Precipitation Heat Treated

Professional Standard - Non-ferrous Metal, True Density Principle

YS/T 587.9-2006 Calcined coke for prebaked blocks. Testing methods. Part 9: Determination of real density
YS/T 63.8-2023 Carbonaceous materials used for the production of aluminium — Part 8:Determination of truth density — Pyknometric method
YS/T 574.5-2006 Determination of Calcium and Magnesium by Atomic Absorption Spectrophotometry for Electrovacuum Zirconium Powder
YS/T 63.9-2006 Carbonaceous materials used in the production of aluminium. Part 9:Determination of truth density by helium pyknometry method
YS/T 63.9-2012 Carbonaceous materials used in the production of aluminium.Part 9:Determination of truth density by helium pyknometry method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, True Density Principle

GB/T 34568-2017 Iron ores for blast furnace and direct reduction feedstocks－Determination of bulk density

European Committee for Electrotechnical Standardization（CENELEC）, True Density Principle

EN IEC 62858:2019 Lightning density based on lightning location systems (LLS) - General principles
EN 62858:2015 Lightning density based on lightning location systems (LLS) - General principles

ES-UNE, True Density Principle

UNE-EN IEC 62858:2019 Lightning density based on lightning location systems (LLS) - General principles (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity (Endorsed by Asociación Española de Normalización in January of 2019.)

Sichuan Provincial Standard of the People's Republic of China, True Density Principle

DB51/T 2149.3-2016 Test methods for raw bamboo fibers - Part 3: Test methods for linear density

TR-TSE, True Density Principle

TS 2472-1976 Wood-Determination of Density For Physical And Mechanical Tests
TS 1013-1971 DENSITY, SPECIFIC GRAVITY AND API GRAVITY OF CRUDE PETROLEUM AND PETROLEUM PRODUCTS BY HYDROMETER METHOD

Professional Standard - Traffic, True Density Principle

JT/T 834-2012 Test apparatus for theoretical maximum specific gravity of asphalt mixtures

国家市场监督管理总局、中国国家标准化管理委员会, True Density Principle

GB/T 41485-2022 Nuclear instrumentation—Geophysical borehole instrumentation to determine rock density
GB/T 41325-2022 Low density crystal originated pit polished monocrystalline silicon wafers for integrated circuit

European Association of Aerospace Industries, True Density Principle

AECMA PREN 4095-1997 Aerospace Series Heat Resisting Alloy NI-CH1305 (NiCr16Co10Mo8Al4Ti4) Vacuum Melted Non Heat Treated Precision Castings Edition P 1
AECMA PREN 4097-1997 Aerospace Series Heat Resisting Alloy NI-CD1401 (NiCo10W10Cr9Al6Ta3) Vacuum Melted Precipitation Treated Precision Castings Edition P 1
AECMA PREN 2405-1998 Heat Resisting Nickel Base Alloy NI-P100-HT Solution Treated and Precipitation Treated Forgings Aerospace Series Edition 2 [Refer To: ASD-STAN PREN 2405]
AECMA PREN 2405-1996 Aerospace Series Heat Resisting Alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution and Precipitation Treated Forgings De Less Than or Equal to 200 mm Edition EN

BELST, True Density Principle

STB 1933-2009 Wine production and wine raw material. Method for determination of relative density

SE-SIS, True Density Principle

SIS SS 13 72 18-1984 Concrete testing — Hardened concrete — Change in strength by vacuum treatment
SIS SS-ISO 3838:1987 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary- stoppered pyknometer and graduated bicapillary pyknometer methods

FI-SFS, True Density Principle

SFS 2105-1976

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., True Density Principle

ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, True Density Principle

PREN 4095-1997 Aerospace Series Heat Resisting Alloy NI-CH1305 (NiCr16Co10Mo8Al4Ti4) Vacuum Melted Non Heat Treated Precision Castings (Edition P 1)
PREN 4097-1997 Aerospace Series Heat Resisting Alloy NI-CD1401 (NiCo10W10Cr9Al6Ta3) Vacuum Melted Precipitation Treated Precision Castings (Edition P 1)

API - American Petroleum Institute, True Density Principle

API MPMS 11.1 VOL IV-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IV Table 23A - Generalized Crude Oils Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24A - Generalized Crude Oils Correction of Vo
API MPMS 11.1 VOL VII-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume VII Table 53A - Generalized Crude Oils Correction of Observed Density to Density at 15 Degrees C Table 54A - Generalized Crude Oils Correction of Volume to 15 Degree

CN-DB 6, True Density Principle

DB6527/T 009-2023 Technical specifications for reasonable grazing intensity of natural grassland in summer

Professional Standard - Urban Construction, True Density Principle

CJ/T 461-2014 High density polyethylene suspended carrier for water treatment

BR-ABNT, True Density Principle

ABNT MB-1237-1979