ZH
RU
ES

Air Particle Detection

Air Particle Detection, Total:350 items.

In the international standard classification, Air Particle Detection involves: Ventilators. Fans. Air-conditioners, Air quality, Materials for aerospace construction, Analytical chemistry, Products of the chemical industry, Water quality, Fuels, Miscellaneous domestic and commercial equipment, Radiation measurements, Particle size analysis. Sieving, Installations in buildings, Components for electrical equipment, Semiconducting materials, Metrology and measurement in general, Vocabularies, Nuclear energy engineering, Optics and optical measurements, Environmental protection, Company organization and management, Electronic components in general, Aerospace electric equipment and systems, Acoustics and acoustic measurements, Semiconductor devices, Internal combustion engines for road vehicles, General methods of tests and analysis for food products, Farm buildings, structures and installations.

Underwriters Laboratories (UL), Air Particle Detection

UL 586-1990 High-efficiency, particulate, air filter units
UL 586-1996 High-efficiency, particulate, air filter units

SAE - SAE International, Air Particle Detection

SAE ARP743A-1984 Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Particle Count Method

Professional Standard - Agriculture, Air Particle Detection

121药典四部-2020 0900 Property inspection method 0951 Determination method for aerodynamic properties of fine particles of inhalation preparations
140药典四部-2015 0900 Property inspection method 0951 Determination method for aerodynamic properties of fine particles of inhalation preparations
空气和废气监测分析方法 3.2.13-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Thirteen Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

European Committee for Standardization (CEN), Air Particle Detection

prEN 481-1992 Workplace atmospheres; size fraction definitions for measurement of airbone particles
EN 481:1993 Workplace atmospheres; size fraction definitions for measurement of airborne particles
PD CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol
EN 13205:2001 Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations
EN 1822-5:2000 High Efficiency Particulate Air Filters (HEPA and ULPA) - Part 5: Determining the Efficiency of Filter Element
EN 13890:2002 Workplace atmospheres Procedures for measuring metals and metalloids in airborne particles Requirements and test methods
PD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
EN 1822-2:1998 High Efficiency Air Filters (HEPA and ULPA) - Part 2: Aerosol Production, Measuring Equipment, Particle Counting Statistics
EN 1822-4:2000 High Efficiency Particulate Air Filters (HEPA and ULPA) - Part 4: Determining Leakage of Filter Element (Scan Method)
CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
EN 13890:2009 Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods
PD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers

Military Standard of the People's Republic of China-General Armament Department, Air Particle Detection

GJB 360.26-1987 Test methods for electronic and electrical components Particle impact noise detection
GJB 533.12-1988 Detection methods for 45 components of submarine cabin air. Determination of hydrogen fluoride content. Ion-selective electrode method.

CZ-CSN, Air Particle Detection

CSN EN 481-1994 Workplace atmospheres. Size fraction definitions for measurement of airborne particles

AT-ON, Air Particle Detection

ONORM EN 481-1993 Workplace atmospheres - Size fraction definitions for measurement of airborne particles

HU-MSZT, Air Particle Detection

U.S. Military Regulations and Norms, Air Particle Detection

ARMY MIL-T-51461 VALID NOTICE 2-2004 TESTER, AIRFLOW-GAS PARTICULATE FILTER UNIT, M39
ARMY MIL-T-51461 NOTICE 1-1995 TESTER, AIRFLOW-GAS PARTICULATE FILTER UNIT, M39
ARMY MIL-T-51461 (1)-1987 TESTER, AIRFLOW-GAS PARTICULATE FILTER UNIT, M39
ARMY MIL-T-51461-1980 TESTER, AIRFLOW-GAS PARTICULATE FILTER UNIT, M39

Association of German Mechanical Engineers, Air Particle Detection

VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method
VDI 2452 Blatt 2-1975 Gaseous air pollution measurement; determination of fluoric ion concentration; preseparation and electrometric detection
VDI 2267 Blatt 7-1988 Chemical analysis of particulates in ambient air; determination of thallium and its inorganic compounds as part of the dust precipitation by atomic absorption spectrometry
VDI 3483 Blatt 1-1979 Gaseous air pollution measurement; determination of total organic compounds by use of a flame ionization detector (FID); fundamentals
VDI 2267 Blatt 9-2002 Determination of suspended particulates matter in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic fluorescense spectrometry (AFS) with cold vapour technique
VDI 2267 Blatt 8-2000 Determination of suspended particles in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic absorption spectrometry (AAS) with cold vapour technique

British Standards Institution (BSI), Air Particle Detection

BS ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
BS ISO 16000-42:2023 Indoor air - Measurement of the particle number concentration by condensation particle counters
BS ISO 21438-3:2010 Workplace atmospheres. Determination of inorganic acids by ion chromatography. Hydrofluoric acid and particulate fluorides
BS ISO 14966:2019 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 21501-4:2018+A1:2023 Determination of particle size distribution. Single particle light interaction methods - Light scattering airborne particle counter for clean spaces
23/30464870 DC BS EN 16976. Ambient air. Determination of the particle number concentration of atmospheric aerosol
18/30375050 DC BS ISO 14966. Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
21/30396033 DC BS ISO 16000-42. Indoor air - Part 42. Measurement of the particle number concentration by Condensation Particle Counters
BS ISO 30011:2011 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
BS DD ISO/TS 21220:2009 Particulate air filters for general ventilation - Determination of filtration performance
DD IEC/TS 62396-2:2008 Process management for avionics. Atmospheric radiation effects - Guidelines for single event effects testing for avionics systems
DD IEC/PAS 62396-2:2007 Process management for avionics. Atmospheric radiation effects - Guidelines for single event effects testing for avionics systems
BS ISO 16362:2005 Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
BS EN ISO 28439:2011 Workplace atmospheres. Characterization of ultrafine aerosols/nanoaerosols. Determination of the size distribution and number concentration using differential electrical mobility analysing systems
BS EN 13890:2002 Workplace atmospheres - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods
21/30419440 DC BS ISO 21501-4 AMD1. Determination of particle size distribution. Single particle light interaction methods. Part 4. Light scattering airborne particle counter for clean spaces
BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS ISO 30011:2010 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
BS ISO 15202-1:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling
BS ISO 13794:1999 Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method
BS ISO 16000-20:2014 Indoor air. Detection and enumeration of moulds. Determination of total spore count
BS ISO 15202-2:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sample preparation
BS ISO 10312:2019 Ambient air. Determination of asbestos fibres. Direct transfer transmission electron microscopy method
BS ISO 13794:2019 Ambient air. Determination of asbestos fibres. Indirect-transfer transmission electron microscopy method
BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
BS ISO 10312:1995 Ambient air. Determination of asbestos fibres. Direct-transfer transmission electron microscopy method
BS 1747-13:1994 Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method
BS EN 13205-1:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. General requirements
BS ISO 11174:2023 Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method
BS ISO 15202-2:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sample preparation
BS ISO 15202-3:2004 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Analysis
BS ISO 8518:2005 Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method
19/30383008 DC BS ISO 15202-1. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
BS ISO 11174:1997 Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electro-thermal atomic absorption spectrometric method
19/30383011 DC BS ISO 15202-2. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation
BS EN 13205-6:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Transport and handling tests
BS EN 13890:2009 Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods
22/30435294 DC BS ISO 11174. Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method
BS EN 12341:1999 Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
21/30395416 DC BS ISO 8518. Workplace air. Determination of particulate lead and lead compounds. Flame or electrothermal atomic absorption spectrometric method
BS ISO 16740:2005 Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
BS ISO 11041:1996 Workplace air. Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour. Method by hydride generation and atomic absorption spectrometry
BS PD CEN/TR 13205-3:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Analysis of sampling efficiency data
BS ISO 8518:2022 Tracked Changes. Workplace air. Determination of particulate lead and lead compounds. Flame and electrothermal atomic absorption spectrometric methods
BS EN 13936:2014 Workplace exposure. Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour. Requirements and test methods

International Organization for Standardization (ISO), Air Particle Detection

ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
ISO/FDIS 16000-42 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
ISO 16000-42:2023 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
ISO 8518:1990 Workplace air; determination of particulate lead and lead compounds; flame atomic absorption spectrometric method
ISO 29463-2:2011 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics
ISO/TR 27628:2007 Workplace atmospheres - Ultrafine, nanoparticle and nano-structured aerosols - Inhalation exposure characterization and assessment
ISO 14966:2002/cor 1:2007 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method; Technical Corrigendum 1
ISO 21438-3:2010 Workplace atmospheres - Determination of inorganic acids by ion chromatography - Part 3: Hydrofluoric acid and particulate fluorides
ISO 30011:2010 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
ISO 9855:1993 Ambient air; determination of the particulate lead content of aerosols collected on filters; atomic absorption spectrometric method
ISO 13794:1999 Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method
ISO 10312:1995 Ambient air - Determination of asbestos fibres - Direct-transfer transmission electron microscopy method
ISO 11174:1996 Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electrothermal atomic absorption spectrometric method
ISO 8518:2001 Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method
ISO/TS 19713-1:2010 Road vehicles - Inlet air cleaning equipment for internal combustion engines and compressors - Part 1: Fractional efficiency testing with fine particles (0,3 μm to 5 μm optical diameter)
ISO 4402:1977 Hydraulic fluid power; Calibration of liquid automatic particle-count instruments; Method using Air Cleaner Fine Test Dust contaminant
ISO 11041:1996 Workplace air - Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour - Method by hydride generation and atomic absorption spectrometry
ISO 29463-3:2011 High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media
ISO 13794:2019 Ambient air — Determination of asbestos fibres — Indirect-transfer transmission electron microscopy method
ISO 10312:2019 Ambient air — Determination of asbestos fibres — Direct transfer transmission electron microscopy method
ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
ISO 15202-1:2020 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
ISO 29463-1:2011 High-efficiency filters and filter media for removing particles in air - Part 1: Classification, performance testing and marking
ISO 16000-20:2014 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count
ISO 29463-1:2017 High efficiency filters and filter media for removing particles from air - Part 1: Classification, performance, testing and marking
ISO 15202-2:2020 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation
ISO 15202-3:2004 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis
ISO 8518:2022 Workplace air — Determination of particulate lead and lead compounds — Flame and electrothermal atomic absorption spectrometric methods
ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 16740:2005 Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
ISO/PRF 11174 Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method
ISO 11174:2023 Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method
ISO 14965:2000 Air quality - Determination of total non-methane organic compounds - Cryogenic preconcentration and direct flame ionization detection method

Japanese Industrial Standards Committee (JISC), Air Particle Detection

JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
JIS K 3850-1:2000 Measuring method for airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS K 3850-3:2000 Measuring method for airborne fibrous particles -- Part 3: Indirect-transfer transmission electron microscopy method
JIS K 3850-2:2000 Measuring method for airborne fibrous particles -- Part 2: Direct-transfer transmission electron microscopy method
JIS Z 4512:1995 Measuring methods of concentration of airborne radioactive particle
JIS B 9920:1989 Measuring methods for airborne particles in clean room and evaluating methods for air cleanliness of clean room

German Institute for Standardization, Air Particle Detection

DIN EN 481:1993 Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993
DIN CEN/TS 16976:2016-11*DIN SPEC 33974:2016-11 Ambient air - Determination of the particle number concentration of atmospheric aerosol; German version CEN/TS 16976:2016
DIN EN 16976:2023-06 Ambient air - Determination of the particle number concentration of atmospheric aerosol; German and English version prEN 16976:2023 / Note: Date of issue 2023-04-28*Intended as replacement for DIN CEN/TS 16976 (2016-11).
DIN ISO 16000-42:2022-01 Indoor air - Part 42: Measurement of the particle number concentration by Condensation Particle Counters (ISO/DIS 16000-42:2021); Text in German and English / Note: Date of issue 2021-12-10
DIN 50452-1:1995 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
DIN EN 16976:2023 Ambient air - Determination of the particle number concentration of atmospheric aerosol; German and English version prEN 16976:2023
DIN EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance; German version EN 779:2012
DIN EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
DIN EN 60749-16:2003-09 Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noise detection (PIND) (IEC 60749-16:2003); German version EN 60749-16:2003
DIN CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version CEN/TS 16450:2013
DIN 33899-3:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN ISO 16000-20:2015-11 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count (ISO 16000-20:2014)
DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) (ISO 16000-27:2014)
DIN ISO 16000-20:2015 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count (ISO 16000-20:2014)
DIN CEN/TS 16450 Berichtigung 1:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version CEN/TS 16450:2013, Corrigendum to DIN CEN/TS 16450 (DIN SPEC 33967):2013-08

American Society for Testing and Materials (ASTM), Air Particle Detection

ASTM D5217-91(2004) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
ASTM F50-92(1996) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM F50-92(2001)e1 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM F50-12 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM D5217-91(1998) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
ASTM D5217-91(2009) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
ASTM D5217-17 Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
ASTM D4096-91(2003) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM F50-07 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM D7614-20 Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
ASTM F328-98 Standard Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles
ASTM D5452-00 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM F50-21 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM E1741-00 Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry
ASTM F50-12(2015) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM D7614-12 Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
ASTM F25-68(1999) Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Clean Rooms and Other Dust-Controlled Areas Designed for Electronic and Similar Applications
ASTM D7439-21 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM E2051-01 Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis
ASTM D7035-16 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7035-04 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7035-21 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D6968-03 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
ASTM D6968-03(2009) Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
ASTM D6968-03(2015) Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Air Particle Detection

GB/T 9802-1988 Air quality--Determination of total suspended particulates--Gravimetric method
GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
GB/T 18204.1-2000 Methods of microbiological examination for air in public places-Determination of aerobic bacterial count

Society of Automotive Engineers (SAE), Air Particle Detection

SAE ARP743A-1993 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF AIR IN DUST CONTROLLED SPACES BY THE PARTICLE COUNT METHOD
SAE ARP743-1962 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF AIR IN DUST CONTROLLED SPACES BY THE PARTICLE COUNT METHOD

Association Francaise de Normalisation, Air Particle Detection

XP X43-075*XP CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol
XP CEN/TS 16976:2016 Air ambiant - Détermination de la concentration en nombre de particules de l'aérosol atmosphérique
NF X43-017:1984 Air quality. Measurement of the concentration of solid particles in ambient air. Beta ray absorption method.
NF X44-012:2012 Particulate air filters for general ventilation - Determination of the filtration performance.
NF ISO 16740:2005 Air des lieux de travail - Détermination du chrome hexavalent dans les particules en suspension dans l'air - Méthode par chromatographie ionique et détection spectrophotométrique avec diphényl carbazide
NF X43-026:1990 Air quality. Ambient air. Determination of lead in airborne particulate. Atomic absorption spectrometry.
XP CEN/TS 17434:2020 Air ambiant - Détermination de la distribution granulométrique de particules d'un aérosol atmosphérique à l'aide d'un spectromètre de granulométrie à mobilité électrique (MPSS)
NF X43-289*NF EN 14530:2004 Workplaces atmospheres - Determination of diesel particulate matter - General requirements
NF X43-023:1991 Air quality. Ambient atmosphere. Measurement of the concentration of particulate matter suspended in the ambient air. Gravimetric method.
NF X43-207*NF ISO 30011:2010 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry.
NF X43-265-2:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2 : sample preparation.
NF X43-262:1990 Air quality. Workplace air. Gravimetric determination of particulate pollution deposits. Rotating disk method.
NF C96-022-16*NF EN 60749-16:2003 Semiconductor devices - Mechanical and climatic test methods - Part 16 : particle impact noise dectection (PIND).
NF ISO 30011:2010 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie de masse avec plasma à couplage inductif
NF ISO 13794:2020 Air ambiant - Dosage des fibres d'amiante - Méthode par microscopie électronique à transmission par transfert indirect
FD CEN/TR 16013-2:2010 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 2 : évaluation des concentrations de particules en suspension dans l'air à l'aide de compteurs optiques de particules
NF X43-249:2009 Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods.
NF ISO 16000-20:2015 Air intérieur - Partie 20 : détection et dénombrement des moisissures - Détermination du nombre total de spores
NF ISO 10312:2020 Air ambiant - Dosage des fibres d'amiante - Méthode par microscopie électronique à transmission par transfert direct
NF ISO 15202-3:2005 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 3 : analyse
NF ISO 15202-1:2020 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 1 : prélèvement d'échantillons
NF X43-404-27*NF ISO 16000-27:2014 Indoor air - Part 27 : determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
NF X43-293:1993 Workplace air. Sampling and determination of diarsenic trioxide and of particulate compounds of arsenic.
NF X43-404-20*NF ISO 16000-20:2015 Indoor air - Part 20 : detection and enumeration of moulds - Determination of total spore count
NF X43-050:2021 Air quality - Determination of the asbestos fiber concentration by transmission electron microscopy - Indirect method
NF ISO 15202-2:2020 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 2 : préparation des échantillons
NF X43-050:1996 Air quality. Determination of the asbestos fiber concentration by transmission electron microscopy. Indirect method.
NF X43-265-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1 : sampling.
NF X43-265-1*NF ISO 15202-1:2020 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1 : sampling
FD ISO 8518:2002 Air des lieux de travail - Dosage du plomb particulaire et des composés particulaires du plomb - Méthode par spectrométrie d'absorption atomique dans la flamme ou méthode par spectrométrie d'absorption avec atomisation électrothermique
NF X43-265-3*NF ISO 15202-3:2005 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3 : analysis
NF X43-211-3*NF ISO 21438-3:2010 Workplace air - Determination of inorganic acids by ion chromatography - Part 3 : hydrofluoric acid and particulate fluorides
FD X43-102*FD ISO 8518:2002 Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method
NF ISO 21438-3:2010 Air des lieux de travail - Détermination des acides inorganiques par chromatographie ionique - Partie 3 : acide fluorhydrique et fluorures particulaires
NF X43-204*NF ISO 16740:2005 Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
NF X43-265-2*NF ISO 15202-2:2020 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2 : sample preparation
NF X43-250*NF EN 13936:2014 Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods
NF EN ISO 28439:2011 Air des lieux de travail - Caractérisation des aérosols ultrafins/nanoaérosols - Détermination de la distribution granulométrique et de la concentration en nombre à l'aide de systèmes d'analyse différentielle de mobilité électrique
NF X44-014-2:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2 : aerosol production, measuring equipment, particle counting statistics.
NF X43-283-1*NF EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1 : general requirements
NF T90-124:2019 Water quality - Determination of the volatile hydrocarbon index - Head-space gas chromatographic method with flame ionisation detector
FD X43-283-3*FD CEN/TR 13205-3:2014 Workplace exposure - Assessment of performance of instruments for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data

BE-NBN, Air Particle Detection

NBN T 94-402-1977 Determination of the zinc mass in particles collected by air fil-tration - Atomic absorption spectrophotometry
NBN T 94-404-1977 Determination of the copper mass in particles collected by air filtration - Atomic absorption spectrophotometry
NBN T 94-403-1977 Determination of the cadmium mass in particles collected by air filtration - Atomic absorption spectrophotometry
NBN T 94-401-1977 Determination of the lead mass in particles collected by air filtration - Atomic absorption spectrophotometry
NBN T 94-406-1977 Determination of the ironmass m particles collected by air filtration - Atomic absorption spectrophotometry
NBN T 94-405-1977 Determination of the nickel mass in particles collected by air fil-tration — Atomic absorption spectrophotometry

RU-GOST R, Air Particle Detection

GOST R 54274-2010 Aviation fuels. Determination of particulate contamination by laboratory filtration method
GOST R 54274-2010(2019) Aviation fuels. Determination of particulate contamination by laboratory filtration method
GOST R 54597-2011 Workplace atmospheres. Ultrafine aerosols, nanoparticle and nano-structured aerosols. Inhalation exposure characterization and assessment
GOST R 54597-2011(2019) Workplace atmospheres. Ultrafine aerosols, nanoparticle and nano-structured aerosols. Inhalation exposure characterization and assessment
GOST R EN 779-2014 Particulate air filters for general ventilation. Determination of the filtration performance
GOST R 8.775-2011 State system for ensuring the uniformity of measurements. Disperse composition of gas atmospheres. Determination of nano particle size by differential electrical mobility analysis for aerosol particles
GOST R ISO 30011-2017 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
GOST ISO 16000-20-2017 Indoor air. Part 20. Detection and enumeration of moulds. Determination of total spore count
GOST R EN 1822-2-2012 High efficiency air filters (EPA, HEPA and ULPA). Part 2. Aerosol production, measuring equipment, particle counting statistics
GOST R ISO 15202-1-2007 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
GOST R ISO 15202-3-2008 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 3. Analysis
GOST R ISO 15202-2-2008 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation
GOST R ISO 15202-1-2014 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
GOST R ISO 15202-2-2014 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation

Korean Agency for Technology and Standards (KATS), Air Particle Detection

KS B 5645-2008 Automatic moniters for suspended particulate matter in ambient air
KS I ISO 27628:2010 Workplace atmospheres-Ultrafine, nanoparticle and nano-structured aerosols-Inhalation exposure characterization and assessment
KS I 4016-2014 Test methods remanufactured particle sensor of air purifier
KS B 6741-1995 Measuring methods for airborn particles in clean room and evaluating methods for air cleanliness of clean room
KS M 9900-2008 Measuring methods for airborn particles in clean room and evaluating methods for air cleanliness of clean room
KS I ISO 15202-3-2005(2016) Workplace air ― Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry ― Part 3: Analysis
KS I ISO 28439:2013 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems
KS I ISO 30011-2012(2017) Workplace air－Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS I ISO 16740-2007(2017) Workplace air－Determination of hexavalent chromium in airborne particulate matter－Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
KS I ISO 9855:2005 Ambient air－Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
KS I ISO 10312:2008 Ambient air-Determination of asbestos fibers-Direct-transfer transmission electron microscopy method
KS I ISO 13794:2008 Ambient air－Determination of asbestos fibres－Indirect-transfer transmission electron microscopy method
KS I ISO 10312-2008(2018) Ambient air－Determination of asbestos fibers－Direct-transfer transmission electron microscopy method
KS I ISO 11174:2008 Workplace air－Determination of particulate cadmium and cadmium compounds－Flame and electrothermal atomic absorption spectromet method
KS I ISO 8518:2006 Workplace air－Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
KS I ISO 9855-2005(2020) Ambient air－Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
KS I ISO 11041:2008 Workplace air－Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour－Method by hydride generation and atomic absorption spectrometry
KS I ISO 15202-3:2021 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis
KS I ISO 30011:2012 Workplace air－Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS C IEC 60749-16-2006(2016) Semiconductor devices－Mechanical and climatic test methods－Part 16：Particle impact noise detection(PIND)
KS I ISO 13794-2008(2018) Ambient air－Determination of asbestos fibres－Indirect-transfer transmission electron microscopy method
KS I ISO 28439:2019 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems
KS I ISO 11174:2019 Workplace air ― Determination of particulate cadmium and cadmium compounds ― Flame and electrothermal atomic absorption spectrometric method
KS I ISO 8518-2006(2017) Workplace air－Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
KS I ISO 15202-1:2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
KS I ISO 8518:2021 Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method
KS I ISO 15202-2:2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation
KS I ISO 15202-3:2005 Workplace air ― Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry ― Part 3: Analysis
KS I ISO 15202-1:2006 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 1:Sampling
KS I ISO 15202-1:2014 Workplace air — Determination of metals and metalloids in Workplace air — Determination of metals and metalloids in emission spectrometry — Part 1: Sampling
KS I ISO 16740:2007 Workplace air－Determination of hexavalent chromium in airborne particulate matter－Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
KS I 30011-2012 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS I ISO 14965:2007 Air quality－Determination of total non-methane organic compounds－Cryogenic preconcentration and direct flame ionization detection method
KS I ISO 14965:2017 Air quality－Determination of total non-methane organic compounds－Cryogenic preconcentration and direct flame ionization detection method
KS I ISO 11041:2019 Workplace air ― Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour ― Method by hydride generation and atomic absorption spectrometry
KS I ISO 21438-3:2012 Workplace atmospheres－Determination of inorganic acids by ion chromatography－Part 3：Hydrofluoric acid and particulate fluorides

Group Standards of the People's Republic of China, Air Particle Detection

T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
T/CAS 406-2020 Evaluation of Air Odor in Cars: Coupling Analysis Method of Sensory and Photoion Detector
T/SAASS 40-2022 Sampling and detection technology of pathogenic microorganisms in the air of pig farm slaughterhouse harmless treatment field

Standard Association of Australia （SAA）, Air Particle Detection

AS 4260.2(Int):1994 High efficiency particulate air (HEPA) filters part 2: Methods of test
AS 2800:1985 Ambient air - Determination of particulate lead - High volume sampler gravimetric collection - Flame atomic absorption spectrometric method
AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
AS/NZS 3580.9.13:2013
AS 3580.13.1:1993 Methods for sampling and analysis of ambient air - Determination of fluorides - Gaseous and acid-soluble particulate fluorides - Automated, double paper tape sampling
AS 3580.13.2:1991 Methods for sampling and analysis of ambient air - Determination of fluorides - Gaseous and acid-soluble particulate fluorides - Manual, double filter paper sampling

CEN - European Committee for Standardization, Air Particle Detection

EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production@ measuring equipment and particle-counting statistics
EN ISO 29463-3:2018 High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media

Lithuanian Standards Office , Air Particle Detection

LST EN 779-2012 Particulate air filters for general ventilation - Determination of the filtration performance
LST EN 13205-2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
LST EN 1822-2-2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
LST EN 60749-16-2003 Semiconductor devices. Mechanical and climatic test methods. Part 16: Particle impact noise detection (PIND) (IEC 60749-16:2003)
LST ISO 9855:2003 Ambient air. Determination of the particulate lead content of aerosols collected on filters. Atomic absorption spectrometric method (idt ISO 9855:1993)
LST ISO 8518:2003 Workplace air. Determination of particulate lead and lead compounds. Flame or electrothermal atomic absorption spectrometric method (idt ISO 8518:2001)

Danish Standards Foundation, Air Particle Detection

DS/EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance
DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
DS/ISO 21501-4:2007 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
DS/EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
DS/EN 60749-16:2003 Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noice detection (PIND)
DS/ISO 16740:2007 Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
DS/ISO 15202-3:2007 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis

VN-TCVN, Air Particle Detection

TCVN 7759-2008 Distillate Fuels.Determination of free water and particulate contamination (Visual inspection procedures)
TCVN 6152-1996 Ambient air.Determination of the particulate lead content of aerosols collected on filters.Atomic absorption spectrometric method
TCVN 6502-1999 Ambient air.Determination of asbestos bibres.Direct-transfer transmission electron microscopy method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Air Particle Detection

GB/T 34168-2017 Test method of gold and silver nanoparticle materials biological effect by transmission electron microscope

FI-SFS, Air Particle Detection

SFS 5417-1987

Anhui Provincial Standard of the People's Republic of China, Air Particle Detection

DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air

Professional Standard - Environmental Protection, Air Particle Detection

HJ 1133-2020 Determination of arsenic, selenium, bismuth and antimony in ambient air and exhaust gas particulate matter by atomic fluorescence method
HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
HJ 800-2016 Ambient air-Determination of the water soluble cations(Li+、Na+、NH4+、K+、Ca2+、Mg2+) from atmospheric particles-Ion chromatography
HJ 1271-2022 Ambient Air—Determination of formic acid, acetic acid and oxalic acid in particulate matter—Ion chromatography
HJ 653-2013 Specifications and test procedures for ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
HJ 653-2021 Technical requirements and detection methods for continuous automatic monitoring system of ambient air particulate matter (PM10 and PM2.5)
HJ 657-2013 Ambient air and stationary source emission.Determination of metals in ambient particulate matter.Inductively coupled plasma/mass spectrometry (ICP-MS)
HJ 777-2015 Ambient air and waste gas from stationary sources emission -Determination of metal elements in ambient particle matter-Inductively coupled plasma optical emission spectrometry
HJ 799-2016 Determination of water-soluble anions (F-, Cl-, Br-, NO2-, NO3-, PO43-, SO32-, SO42-) in ambient air particulate matter by ion chromatography
HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"
HJ 653-2013(XG1-2018) Ambient Air Particulate Matter (PM10 and PM2.5) Continuous Automatic Monitoring System Technical Requirements and Detection Methods "No. 1 Amendment"
HJ 657-2013(XG1-2018) Determination of lead and other metal elements in air and exhaust gas particulate matter Inductively coupled plasma mass spectrometry "No. 1 Amendment"

American National Standards Institute （ANSI), Air Particle Detection

ANSI/ASTM F2608:2007 Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
ANSI/ASTM D6059:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
ANSI/ASTM D6056:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy

Professional Standard - Nuclear Industry, Air Particle Detection

EJ/T 20027-2012 Verification of purification coefficient of high efficiency particulate air filter in nuclear air treatment systems.Uranin aerosol method

International Electrotechnical Commission (IEC), Air Particle Detection

IEC 62396-2:2012 Process management for avionics - Atmospheric radiation effects - Part 2: Guidelines for single event effects testing for avionics systems

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Air Particle Detection

ASHRAE CI-01-1-2-2001 Measurement of Two-Dimensional Air Velocities in a Full-Scale Room Using Particle Image Velocimetry
ASHRAE HI-02-19-2-2002 Development of a Particle Image Velocimetry for Measuring Air Velocity in Large-Scale Room Airflow Applications (RP-978)

KR-KS, Air Particle Detection

KS I ISO 30011-2022 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS I ISO 15202-3-2021 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis
KS I ISO 28439-2019 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems
KS I ISO 11174-2019 Workplace air ― Determination of particulate cadmium and cadmium compounds ― Flame and electrothermal atomic absorption spectrometric method
KS I ISO 15202-1-2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
KS I ISO 8518-2021 Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method
KS I ISO 16740-2022 Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
KS I ISO 15202-2-2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation
KS I ISO 11041-2019 Workplace air ― Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour ― Method by hydride generation and atomic absorption spectrometry

AENOR, Air Particle Detection

UNE-EN 60749-16:2003 Semiconductor devices. Mechanical and climatic test methods. Part 16: Particle impact noise detection (PIND)
UNE 77230:1998 AMBIENT AIR. DETERMIANTION OF THE PARTICULATE LEAD CONTENT OF AEROSOLS COLLECTED ON FILTERS. ATOMIC ABSORPTION SPECTROMETRIC METHOD.
UNE 77236:1999 AMBIENT AIR. DETERMINATION OF ASBESTOS FIBRES. DIRECT-TRANSFER TRANSMISSION ELECTRON MICROSCOPY METHOD.
UNE-EN 1822-2:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
UNE 81587:2017 Workplace exposure. Determination of metals and metalloids in airborne particles. Atomic Spectrometry method.
UNE 77251:2003 Air quality -- Determination of total non-methane organic compounds -- Cryogenic preconcentration and direct flame ionization detection method.

国家市场监督管理总局、中国国家标准化管理委员会, Air Particle Detection

GB/T 37406-2019 Detection method of degree of sphericity of spherical silica for electronic packaging—Particle dynamic photoelectric projection method
GB/T 25915.2-2021 Cleanrooms and associated controlled environments—Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
GB/T 35097-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air
GB/T 25915.12-2021 Cleanrooms and associated controlled environments—Part 12: Specifications for monitoring of air cleanliness by nanoscale particle concentration

Shandong Provincial Standard of the People's Republic of China, Air Particle Detection

DB37/T 4078-2020 Continuous monitoring of volatile organic compounds in ambient air by gas chromatography-hydrogen flame ionization detector/mass spectrometry detector
DB37/T 4434-2021 Determination of 57 kinds of ozone precursors in ambient air by tank sampling gas chromatography-hydrogen flame ionization detector mass spectrometry

PT-IPQ, Air Particle Detection

NP EN 12393-2-2002 Non-fatty foods Multiresidue methods for the gas chromatographic determination of pesticide residues Part 2:Methods for extraction and clean-up

未注明发布机构, Air Particle Detection

BS ISO 11174:1996(1998) Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electro - thermal atomic absorption spectrometric method
BS ISO 11041:1996(1998) Workplace air — Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour — Method by hydride generation and atomic absorption spectrometry

YU-JUS, Air Particle Detection

JUS U.M1.056-1993 Concrete - Determination for contents and factor pore's distance of aerated concrete with line microscope analysis

GOSTR, Air Particle Detection

GOST R ISO 14644-12-2020 Cleanrooms and associated controlled environments. Part 12. Specifications for monitoring air cleanliness b nanoscale particle concentration

PL-PKN, Air Particle Detection

PN Z04097 Arkusz 01-1974 Air purity protection Tests for the size composition of dust Measurement of quantitative distribution of projective dust particie size ^2 (im with micros- cope without using of immersion li?uid
PN Z04002 Arkusz 05-1974 Air purity protection Tests of dust physical properties Determination of average porosity and average kinecic size of dust particles
PN Z04102-06-1986 Air purity protection Tests for cadmium and its compounds Determination of cadmium and its compounds in suspended particles in the ambient air (imision) by atomie absorption spectrometry
PN Z04139-05-1986 Air purity protection Tests for lead and its compounds Determination of lead and its compounds in suspended particies in the ambient air (imision) by atomie absorption spectrometry
PN Z04002 Arkusz 03-1974 Air purity protection Tests of dust physical properties Determination of average mass and average statical volumetric size of dust particles
PN Z04207-03-1990 Air punty protection Tests for mercaptans Determination of ethyl mercaptan n work places by gas chromatography ith flame ionization detection
PN Z04207-04-1992 Air purity protection Tests for mercaptans Determination of methyl mercaptan n work places by gas chromatography with flame ionization detection