ZH

RU

ES

upper headspace method

upper headspace method, Total:498 items.

In the international standard classification, upper headspace method involves: Footwear, Solar energy engineering, Protection against crime, Air quality, Protection against dangerous goods, Railway rolling stock, Clothes, Water quality, Packaging materials and accessories, Sensory analysis, Energy and heat transfer engineering in general, Lifting equipment, Laboratory medicine, Iron and steel products, Construction materials, Spices and condiments. Food additives, Protection against fire, Elements of buildings, Road vehicle systems, Surface treatment and coating, Soil quality. Pedology, Waxes, bituminous materials and other petroleum products, Analytical chemistry, Products of the textile industry, Installations in buildings, Ground service and maintenance equipment, Beverages, Tea. Coffee. Cocoa, Geology. Meteorology. Hydrology, Vocabularies, Aerospace electric equipment and systems, Non-textile floor coverings, Insulating fluids, Kitchen equipment, Edible oils and fats. Oilseeds, Linear and angular measurements, Equipment for the chemical industry, Petroleum, petroleum products and natural gas handling equipment, Lubricants, industrial oils and related products, Products of the chemical industry, Protective equipment, Tobacco, tobacco products and related equipment, Pesticides and other agrochemicals, Jewellery, Fasteners for aerospace construction, Power transmission and distribution networks, Rubber and plastics products, Textile fibres, Passenger cars. Caravans and light trailers, Building accessories, Equipment for entertainment, Electrical wires and cables, Wastes, Materials for aerospace construction, Plastics, Aids for disabled or handicapped persons, Raw materials for rubber and plastics, Electrical accessories, Pipeline components and pipelines, Burners. Boilers, Bottles. Pots. Jars, Prepackaged and prepared foods, Materials and articles in contact with foodstuffs, Environmental protection, General methods of tests and analysis for food products, On-board equipment and instruments, Road engineering, Ergonomics, Domestic, commercial and industrial heating appliances, Extraction and processing of petroleum and natural gas, Structures of buildings, Shipbuilding and marine structures in general, Paints and varnishes, Farming and forestry, Telecommunication systems, Fluid storage devices, Astronomy. Geodesy. Geography, Mining and quarrying.


Association Francaise de Normalisation, upper headspace method

  • NF EN 12561-4:2011 Applications ferroviaires - Wagons citernes - Partie 4 : dispositifs supérieurs de vidange et de remplissage par le haut pour produits liquides
  • NF G62-121*NF EN ISO 19958:2004 Footwear - Test methods for heels and top pieces - Top piece retention strength
  • NF F37-100-4*NF EN 12561-4:2011 Railway applications - Tank wagons - Part 4 : top devices for top emptying and filling of liquid products.
  • NF L91-002-19/IN1*NF EN 12312-19/IN1:2010 Aircraft ground support equipment - Specific requirements - Part 19 : aircraft jacks, axle jacks and hydraulic tail stanchions
  • NF EN 14437:2022 Détermination de la résistance au soulèvement des tuiles en terre cuite ou en béton mises en oeuvre sur la toiture - Méthode d'essai par système de toiture
  • NF ISO 11423-1:1997 Qualité de l'eau - Détermination du benzène et de certains dérivés benzéniques - Partie 1 : méthode par chromatographie en phase gazeuse de l'espace de tête
  • NF G07-112-1*NF EN ISO 13938-1:2019 Textiles - Bursting properties of fabrics - Part 1 : hydraulic method for determination of bursting strength and bursting distension
  • NF P52-308-2:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 o C - Part 2 : test method for thermal output.
  • NF G07-112-2*NF EN ISO 13938-2:2019 Textiles - Bursting properties of fabrics - Part 2 : pneumatic method for determination of bursting strength and bursting distension
  • NF EN 13628-2:2002 Emballage - Matériaux d'emballages souples - Détermination des solvants résiduels par chromatographie en phase gazeuse et espace de tête statique - Partie 2 : méthodes industrielles
  • NF EN 14479:2004 Emballage - Matériaux d'emballage souples - Détermination des solvants par chromatographie en phase gazeuse avec espace de tête dynamique - Méthode absolue
  • NF G07-112-1:1999 Textiles. Bursting properties of fabrics. Part 1 : hydraulic method for determination of bursting strength and bursting distension.
  • XP P92-160*XP CEN/TS 1187:2014 Test methods for external fire exposure to roofs
  • XP CEN/TS 1187:2014 Méthodes d'essai pour l'exposition des toitures à un feu extérieur
  • NF EN 13628-1:2003 Emballage - Matériaux d'emballages souples - Détermination des solvants résiduels par chromatographie en phase gazeuse et espace de tête statique - Partie 1 : méthodes absolues
  • NF L91-002-19*NF EN 12312-19+A1:2010 Aircraft ground support equipment - Specific requirements - Part 19 : aircraft jacks, axle jacks and hydraulic tail stanchions.
  • NF A08-822:2012 Méthode d'essai de caractérisation des ferrailles sur aire bétonnée
  • NF P31-201-1:1993 DTU 40-22. Building works. Roof-covering made from hollow terracotta tiles. Part 1 : technical specifications.
  • NF C11-241-3-8:2002 Overhead electrical lines exceeding AC 45 kV - Part 3-8 : set of National Normative Aspects - France.
  • NF P34-216-1/A1:1999 DTU 40.46. Travaux de bâtiment - Travaux de couverture en plomb sur support continu - Partie 1 : cahier des clauses techniques.
  • NF P34-216-1:1994 DTU 40.46. Travaux de bâtiment - Travaux de couverture en plomb sur support continu - Partie 1 : cahier des clauses techniques.
  • NF P52-308-3:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 o C - Part 3 : rating method and evaluation of radiant thermal output.
  • NF L07-153:1988 Aerospace series - Representation of rivets on drawings for aerospace equipment
  • NF EN 3475-514:2015 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 514 : porosité d'un revêtement cuivre sur des brins aluminium
  • NF P38-301:2013 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
  • NF P38-301/IN1*NF EN 1013/IN1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
  • NF P38-301*NF EN 1013+A1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
  • NF L52-250-514:2008 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514 : porosity of copper cladding on aluminium strands.
  • NF L52-250-514*NF EN 3475-514:2015 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514 : porosity of copper cladding on aluminium strands
  • NF EN ISO 13938-2:2019 Textiles - Propriétés de résistance à l'éclatement des étoffes - Partie 2 : méthode pneumatique pour la détermination de la résistance et de la déformation à l'éclatement
  • NF H96-115-1*NF EN 13071-1:2019 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1 : general requirements
  • NF P52-308-1:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 o C - Part 1 : technical specifications and requirements.
  • NF EN ISO 22155:2016 Qualité du sol - Dosage des hydrocarbures aromatiques et halogénés volatils et de certains éthers par chromatographie en phase gazeuse - Méthode par espace de tête statique
  • NF EN 3745-502:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 502 : résistance à la traction sur faible longueur d'une fibre optique
  • NF P30-310:2016 Travaux de couverture et de bardage - Détermination de la résistance caractéristique d'assemblage - Méthode d'essai d'arrachement des fixations de leur support
  • NF P31-201-2:1993 DTU 40-22. Building works. Private contracts. Roof-covering made of hollow terracotta tiles. Part 2 : special clauses.
  • NF H96-115-1:2008 Stationary waste containers up to 5000 l, top lifted bottom emptied - Part 1 : general requirements.
  • NF H96-115-3:2011 Stationary waste containers up to 5000 l, top lifted and bottom emptied - Part 3 : recommended lifting connections.
  • NF H96-115-3*NF EN 13071-3:2019 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3 : recommended lifting connections
  • NF EN ISO 20785-3:2023 Dosimétrie pour les expositions au rayonnement cosmique à bord d\'un avion civil - Partie 3 : mesurages à bord d\'avions
  • NF P98-311-1*NF EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 1 : definitions, classification, general principles of design, performance requirements and test methods
  • NF E31-202:1974 AIR HEATING UNITS-CHARACTERISTICS-GENERAL METHOD OF TEST USING A TEST BED.
  • NF X31-438:2013 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method
  • NF H34-080-2*NF EN 13628-2:2002 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2 : industrial methods.
  • NF H34-080-1*NF EN 13628-1:2003 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1 : absolute methods
  • NF H35-007*NF EN 29885:1994 Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods.
  • NF P38-301-1:1998 Light transmitting profiled plastic sheeting for single skin roofing. Part 1 : general requirements and test methods.
  • NF C11-241-2:2002 Overhead electrical lines exceeding AC 45 kV - Part 2 : index of National Normative Aspects.
  • NF EN 13071-1:2019 Conteneurs fixes à déchets de capacité inférieure ou égale à 5 000 l, levés par le haut et vidés par le bas - Partie 1 : exigences générales
  • NF P30-313:2004 Travaux de couverture - Détermination de la résistance caractéristique d'assemblage - Méthode d'essai d'arrachement des fixations de l'isolant ou du revêtement d'étanchéité sur l'élément porteur
  • NF P30-314:2016 Travaux de couverture et de bardage - Détermination de la résistance caractéristique d'assemblage - Méthode d'essai d'arrachement de l'assemblage des plaques en tôle d'acier ou d'aluminium au support
  • NF EN ISO 16558-1:2015 Qualité du sol - Hydrocarbures de pétrole à risque - Partie 1 : détermination des fractions aliphatiques et aromatiques des hydrocarbures de pétrole volatils par chromatographie en phase gazeuse (méthode par espace de tête statique)
  • NF X31-438*NF EN ISO 22155:2016 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method
  • NF T90-124:2019 Water quality - Determination of the volatile hydrocarbon index - Head-space gas chromatographic method with flame ionisation detector
  • NF P31-201:1993 DTU 40-22. Building works. Roof-covering made from hollow terracotta tiles. Part 1 : technical specifications - Part 2 : special clauses
  • NF F37-033/A1:1976
  • NF X31-430-1/A1*NF EN ISO 16558-1/A1:2020 Soil quality - Risk-based petroleum hydrocarbons - Part 1 : determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) - Amendment 1
  • NF H96-115-2/IN1:2013 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: additional requirements for underground or partly underground systems
  • NF H96-115-2*NF EN 13071-2:2019 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2 : additional requirements for underground or partly underground systems
  • NF V03-167*NF EN 16620:2015 Food analysis - Determination of furan in coffee and coffee products by headspace gas chromatography and mass spectrometry (HS GC-MS)
  • NF EN 16620:2015 Analyse des produits alimentaires - Dosage du furane dans le café et les produits à base de café par chromatographie en phase gazeuse avec espace de tête couplée à la spectrométrie de masse (HS CG-SM)
  • NF ISO 10473:2000 Air ambiant - Mesurage de la masse des matières particulaires sur un milieu filtrant - Méthode par absorption de rayons bêta
  • NF G37-116-2:2003 Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2 : hydraulic method.
  • NF Z84-841-2*NF EN 301841-2:2019 VHF air-ground Digital Link (VDL) Mode 2 - Technical characteristics and methods of measurement for ground-based equipment - Part 2 : upper layers (V1.2.1)

British Standards Institution (BSI), upper headspace method

  • BS EN ISO 24264:2020 Footwear. Test methods for hollow and compact heels and top pieces. Top piece attachment strength
  • BS EN ISO 19958:2004 Footwear - Test methods for heels and top pieces - Top piece retention strength
  • BS 5803-4:1985 Thermal insulation for use in pitched roof spaces in dwellings - Methods for determining flammability and resistance to smouldering
  • BS EN 16212:2012 Energy Efficiency and Savings Calculation, Top-down and Bottom-up Methods
  • BS DD CEN/TS 1187:2012 Test methods for external fire exposure to roofs
  • DD CEN/TS 1187:2012 Test methods for external fire exposure to roofs
  • BS EN 14037-2:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Test methods for thermal output
  • BS EN 12974:2000 Surface active agents - Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure
  • BS EN 12974:2000(2009) Surface active agents - Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure
  • BS DD CEN/TS 13126-11:2004 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 11:Top hung projecting reversible hardware
  • BS 5803-3:1985 Thermal insulation for use in pitched roof spaces in dwellings - Specification for cellulose fibre thermal insulation for application by blowing
  • 20/30393550 DC BS EN 14963-1. Prefabricated accessories for roofing - Part 1. Continuous plastic rooflights. Product specification and test methods
  • 20/30393547 DC BS EN 1873-1. Prefabricated accessories for roofing. Individual plastic rooflights - Part 1. Product specification and test methods
  • BS EN ISO 17943:2016 Water quality. Determination of volatile organic compounds in water. Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • BS EN 13071-1:2019 Tracked Changes. Stationary waste containers up to 5 000 l, top lifted and bottom emptied. General requirements
  • BS ISO 19813:2007 Road vehicles - Ignition systems - Test methods and requirements for high voltage boots on plug-top coils and pencil coils
  • BS EN 13071-3:2011 Stationary waste containers up to 5000 l, top lifted and bottom emptied. Recommended lifting connections
  • BS EN 13071-3:2019 Stationary waste containers up to 5000 l, top lifted and bottom emptied. Recommended lifting connections
  • BS EN 3475-514:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Porosity of copper cladding on aluminium strands
  • BS EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas. Definitions, classification, general principles of design, performance requirements and test methods
  • BS EN 13750:2002 Domestic water kettles for use on top of stove, cooker or hob - Requirements and test methods
  • 12/30235906 DC BS ISO 16507. Timber structures. Uniform, concentrated static and concentrated impact loads on wood-based roof and floor panel assemblies. Test methods
  • BS 5803-2:1985 Thermal insulation for use in pitched roof spaces in dwellings - Specification for man-made mineral fibre thermal insulation in pelleted or granular form for application by blowing
  • BS EN 29885:1994 Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods
  • BS 5803-5:1985 Thermal insulation for use in pitched roof spaces in dwellings - Specification for installation of man-made mineral fibre and cellulose fibre insulation
  • BS EN 6059-503:2012 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Temperature rise due to rated current injected on the sleeve
  • BS EN ISO 22155:2016 Tracked Changes. Soil quality. Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method

American Society for Testing and Materials (ASTM), upper headspace method

  • ASTM E2766-13(2019) Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs
  • ASTM D5076-90(2000)e1 Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
  • ASTM D7093-13 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
  • ASTM D7093-19 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
  • ASTM D5076/D5076M-13(2019) Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
  • ASTM E1680-16(2022) Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
  • ASTM D727-96 Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
  • ASTM D727-96(2001) Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
  • ASTM D727-96(2006) Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
  • ASTM F1521-12(2018) Standard Test Methods for Performance of Range Tops
  • ASTM D8052/D8052M-17 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
  • ASTM D8052/D8052M-22 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
  • ASTM F2714-08 Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
  • ASTM D3871-84(1995)e1 Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
  • ASTM D3871-84(2017) Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
  • ASTM F2714-08(2021) Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
  • ASTM D519-04(2008) Standard Test Method for Length of Fiber in Wool Top
  • ASTM D519-90(1995)e1 Standard Test Method for Length of Fiber in Wool Top
  • ASTM E1413-00 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
  • ASTM E1413-00(2005) Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
  • ASTM E1413-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration onto an Adsorbent Tube
  • ASTM E3189-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Static Headspace Concentration onto an Adsorbent Tube
  • ASTM D4526-96(2007) Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
  • ASTM D4526-96 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
  • ASTM F2714-08(2013) Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
  • ASTM D4526-20 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
  • ASTM C828-11(2021) Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
  • ASTM D6021-96(2001)e1 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
  • ASTM D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
  • ASTM D2612-99(2011) Standard Test Method for Fiber Cohesion in Sliver and Top (Static Tests)
  • ASTM D2612-99(2018) Standard Test Method for Fiber Cohesion in Sliver and Top (Static Tests)
  • ASTM D3749-13 Standard Test Method for Residual Vinyl Chloride Monomer in Polylpar;Vinyl Chloriderpar; Resins by Gas Chromatographic Headspace Technique
  • ASTM D4526-12 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
  • ASTM E2322-22 Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
  • ASTM C828-03 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
  • ASTM C828-01 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
  • ASTM C828-98 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
  • ASTM C828-06 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
  • ASTM C828-11 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
  • ASTM C828-11(2016) Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
  • ASTM E1680-16 Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
  • ASTM E859-93(2006) Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
  • ASTM E1592-01 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
  • ASTM E1592-98 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
  • ASTM E1592-05(2012) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
  • ASTM E1592-05 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
  • ASTM E1412-12 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
  • ASTM E1413-13 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
  • ASTM D1770-94(2000) Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top
  • ASTM D2612-99 Standard Test Method for Fiber Cohesion in Sliver and Top in Static Tests
  • ASTM E1413-07 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
  • ASTM E1412-16 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
  • ASTM E859-93(2011) Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members

HU-MSZT, upper headspace method

Professional Standard - Public Safety Standards, upper headspace method

  • GA/T 208-2019 Phosphine Detection in Forensic Science Biological Samples by Headspace Gas Chromatography and Headspace Gas Chromatography-Mass Spectrometry
  • GA/T 2072-2023 Forensic sciences—Examination methods for chloral hydrate in biological samples—HS/GC-MS
  • GA/T 204-2019 Headspace Gas Chromatography for the Detection of Benzene, Toluene, Ethylbenzene and Xylene in Blood and Urine for Forensic Science

International Organization for Standardization (ISO), upper headspace method

  • ISO 19958:2004 Footwear - Test methods for heels and top pieces - Top piece retention strength
  • ISO 24264:2020 Footwear — Test methods for hollow and compact heels with top pieces — Top piece attachment strength
  • ISO 12468-1:2013 External exposure of roofs to fire.Part 1: Test method
  • ISO 12468-1:2003 External exposure of roofs to fire - Part 1: Test method
  • ISO/CD 8144-1:2023 Thermal insulation — Mineral wool mats for ventilated roof spaces — Part 1: Specification for applications with restricted ventilation
  • ISO 24415-2:2011 Tips for assistive products for walking - Requirements and test methods - Part 2: Durability of tips for crutches
  • ISO 9885:1991 Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods
  • ISO 16558-1:2015 Soil quality - Risk-based petroleum hydrocarbons - Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method)
  • ISO/DIS 17895:1979 Paints and varnishes — Determination of volatile organic compound (VOC) — Gas-chromatographic method with headspace injection for VOC determination
  • ISO 10473:2000 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method
  • ISO 15748-2:2002 Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation
  • ISO/CD 8144-2:2023 Thermal insulation — Mineral wool mats for ventilated roof spaces — Part 2: Specification for horizontal applications with unrestricted ventilation
  • ISO 17943:2016 Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • ISO 9855:1993 Ambient air; determination of the particulate lead content of aerosols collected on filters; atomic absorption spectrometric method

Korean Agency for Technology and Standards (KATS), upper headspace method

  • KS M ISO 19958:2005 Footwear-Test methods for heels and top pieces-Top piece retention strength
  • KS I ISO 11423-1:2008 Water quality-Determination of benzene and some derivatives-Part 1:Head-space gas chromatographic method
  • KS I ISO 11423-1-2008(2018) Water quality-Determination of benzene and some derivatives-Part 1:Head-space gas chromatographic method
  • KS C IEC 61084-2-1:2004 Cable trunking and ducting systems for electrical installations Part 2:Particular requirements-Section 1:Cable trunking and ducting systems intended for mounting on walls or ceiling
  • KS C IEC 61084-2-1:2014 Cable trunking and ducting systems for electrical installations Part 2:Particular requirements-Section 1:Cable trunking and ducting systems intended for mounting on walls or ceiling
  • KS K 0426-2022 Test method for fiber cohesion in sliver and top (static tests)
  • KS K 0426-2016 Test method for fiber cohesion in sliver and top(static tests)
  • KS W ISO 8642-2007(2018) Aerospace-Self-locking nuts with maximum operating temperature greater than 425 ℃-Test methods
  • KS I ISO 10473:2010 Ambient air-Measurement of the mass of particulate matter on a filter medium-Beta-ray absorption method
  • KS I ISO 22155-2016(2021) Soil quality-Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers-Static headspace method
  • KS M 1993-1-2020 Determination of emissive organic compounds in solid and/or semi-solid products — Part 1: Volatile organic compounds —Headspace - gas chromatography
  • KS I ISO 9855:2005 Ambient air-Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
  • KS I ISO 10473:2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method

German Institute for Standardization, upper headspace method

  • DIN EN ISO 19958:2004 Footwear - Test methods for heels and top pieces - Top piece retention strength (ISO 19958:2004); German version EN ISO 19958:2004
  • DIN 14094-2:2017-04 Firefighting and fire protection - Escape ladder installations - Part 2: Rescue ways on flat and inclined roofs
  • DIN 55534:2006 Testing of taste transfer from packages and packaging materials through the head space using water as the test medium
  • DIN EN 10243-2:2000 Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; German version EN 10243-2:1999
  • DIN CEN/TS 1187:2012 Test methods for external fire exposure to roofs; German version CEN/TS 1187:2012
  • DIN CEN/TS 1187:2012-03*DIN SPEC 91187:2012-03 Test methods for external fire exposure to roofs; German version CEN/TS 1187:2012
  • DIN EN 10243-2 Berichtigung 1:2005 Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; German version EN 10243-2:1999, Corrigenda to DIN EN 10243-2:2000-06; German version EN 10243-2:1999/AC:2005
  • DIN EN 13628-1:2003-01 Packaging; Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods; German version EN 13628-1:2002
  • DIN EN ISO 13938-2:2020-03 Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:2019); German version EN ISO 13938-2:2019
  • DIN EN ISO 13938-1:2020-02 Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:2019); German version EN ISO 13938-1:2019
  • DIN EN 13628-2:2003-01 Packaging; Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods; German version EN 13628-2:2002
  • DIN EN 3475-514:2014 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands; German and English version EN 3475-514:2014
  • DIN EN 3475-514:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands; German and English version EN 3475-514:2007
  • DIN EN ISO 13938-2:2020 Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:2019)
  • DIN EN 16212:2012 Energy efficiency and savings calculation - Top-down and Bottom-up methods; German version EN 16212:2012
  • DIN EN 12561-4:2011-10 Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products; German version EN 12561-4:2011
  • DIN EN 14479:2004-06 Packaging, Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method; German version EN 14479:2004
  • DIN EN 2544:1989 Aerospace series; representation of rivets on drawings for aerospace equipment; german version EN 2544:1987
  • DIN EN 14963-1:2020-09 Prefabricated accessories for roofing - Part 1: Continuous plastic rooflights - Product specification and test methods; German and English version prEN 14963-1:2020 / Note: Date of issue 2020-08-07*Intended as replacement for DIN EN 14963 (2006-12), DI...
  • DIN EN 14459:2020-09 Prefabricated accessories for roofing - Part 1: Individual plastic rooflights - Product specification and test methods; German and English version prEN 1873-1:2020 / Note: Date of issue 2020-08-07*Intended as replacement for DIN EN 1873 (2016-07).
  • DIN EN 1873-1:2020-09 Prefabricated accessories for roofing - Part 1: Individual plastic rooflights - Product specification and test methods; German and English version prEN 1873-1:2020 / Note: Date of issue 2020-08-07*Intended as replacement for DIN EN 1873 (2016-07).
  • DIN EN ISO 24264:2021-03 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020); German version EN ISO 24264:2020
  • DIN EN 14963-1:2020 Prefabricated accessories for roofing - Part 1: Continuous plastic rooflights - Product specification and test methods; German and English version prEN 14963-1:2020
  • DIN EN 1873-1:2020 Prefabricated accessories for roofing - Part 1: Individual plastic rooflights - Product specification and test methods; German and English version prEN 1873-1:2020
  • DIN EN 14037-1:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 1: Technical specifications and requirements; German version EN 14037-1:2003
  • DIN EN 13071-1:2019 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
  • DIN EN 13071-1:2008 Stationary waste containers up to 5000 l, top lifted and bottom emptied - Part 1: General requirements; English version of DIN EN 13071-1:2008-10
  • DIN EN 13071-1:2019-09 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements; German version EN 13071-1:2019
  • DIN EN ISO 22155:2016-07 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method (ISO 22155:2016); German version EN ISO 22155:2016
  • DIN EN 13071-3:2019 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
  • DIN EN 13071-3:2019-12 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections; German version EN 13071-3:2019
  • DIN VDE V 0210-9:2018 Overhead electrical lines exceeding 45 kV - Part 9: Hybrid AC/DC transmission and DC transmission
  • DIN EN 1013:2013 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods; German version EN 1013:2012
  • DIN EN 1013:2015 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods; German version EN 1013:2012+A1:2014
  • DIN EN 12561-4:2011 Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products; German version EN 12561-4:2011
  • DIN EN 13071-3:2011 Stationary waste containers up to 5000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections; German version EN 13071-3:2011
  • DIN EN 124-1:2015-09 Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods; German version EN 124-1:2015
  • DIN EN 2155-9:1989 Aerospace series; test methods for transparent materials for aircraft glazing; part 9: determination of haze; german version EN 2155-9:1989
  • DIN EN 2651:1996 Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996
  • DIN SPEC 5452-5:2021 Aerospace series - Unmanned Aircraft Systems (UAS) - Part 5: Digital roof measurement via drone
  • DIN 55534:2006-08 Testing of taste transfer from packages and packaging materials through the head space using water as the test medium
  • DIN EN 13071-2:2008 Stationary waste containers up to 5000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems; English version of DIN EN 13071-2:2008-10
  • DIN EN 13071-2:2019 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
  • DIN ISO 10473:2002-08 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)
  • DIN EN ISO 3303-2:2020-12 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method (ISO 3303-2:2020); German version EN ISO 3303-2:2020
  • DIN EN ISO 3303-1:2020-12 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method (ISO 3303-1:2020); German version EN ISO 3303-1:2020
  • DIN EN 2591-509:2023-03 Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts; German version ASD-STAN prEN 2591-509:2022 / Note: Date of issue 2023-01-27*Intended as replacement for DIN EN 2591-509 (2003-05).
  • DIN EN 3475-514:2014-07 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands; German and English version EN 3475-514:2014 / Note: Applies in conjunction with DIN EN 3475-100 (2011-01).

Chongqing Provincial Standard of the People's Republic of China, upper headspace method

  • DB50/T 835-2017 Determination of Methanol in Water by Headspace Gas Chromatography

SE-SIS, upper headspace method

U.S. Military Regulations and Norms, upper headspace method

Professional Standard - Environmental Protection, upper headspace method

  • HJ 1072-2019 Water quality-Determination of pyridine-Headspace/gas chromatography
  • HJ 1067-2019 Water quality-Determination of benzene and its analogies-Headspace/gas chromatography
  • HJ 895-2017 Water quality-Determination of methanol and acetone-Headspace/gas chromatography
  • HJ 975-2018 Solid waste-Determination of benzene and its analogies-Headspace-gas chromatography
  • HJ 959-2018 Water quality-Determination of tetraethyl lead-Headspace/gas chromatography-mass spectrometry
  • HJ 620-2011 Water quality.Determination of volatile halogenated organic compounds.Headspace gas chromatography
  • HJ 1042-2019 Ambient air and waster gas-Determination of trimethylamine-Solvent absorption-Headspace/gas chromatography
  • HJ 976-2018 Determination of Benzene Series in Solid Waste by Headspace Gas Chromatography-Mass Spectrometry
  • HJ 760-2015 Solid waste—Determination of volatile organic compounds — Headspace-gas chromatography method
  • HJ 810-2016 Water quality –Determination of volatile organic compounds – Headspace / Gas chromatography mass spectrometry
  • HJ 642-2013 Soil and sediment.Determination of volatile organic compounds.Headspace-gas chromatography/mass method
  • HJ 742-2015 Soil and sediment—Determination of volatile aromatic hydrocarbons—Headspace gas chromatography
  • HJ 643-2013 Solid waste -Determination of volatile organic compounds- Headspace-gas chromatography/mass method
  • HJ 741-2015 Soil and sediment—Determination of volatile organic compounds—Headspace gas chromatography
  • HJ 714-2014 Solid wastes-Determination of volatile halohydrocarbons -Headspace gas chromatography mass method
  • HJ 1194-2021 Determination of Liquid Refrigerants CFC-11 and HCFC-123 by Headspace/Gas Chromatography-Mass Spectrometry
  • HJ 874-2017 Solid waste-Determination of acrolein, acrylonitrile and acetonitrile-Headspace gas chromatography method
  • HJ 736-2015 Soil and sediment.Determination of volatile halohydrocarbons.Headspace gas chromatography mass spectrometry
  • HJ 679-2013 Soil and sediment.Determination of acrolein, acrylonitrile, acetonitrile Headspace.Gas chromatography method
  • HJ 1227-2021 Water quality—Emergency determination of volatile organic compounds —Portable headspace/gas chromatography-mass
  • HJ 1054-2019 Soil and sediment—Determination of dithiocarbamate pesticides —Headspace gas chromatography

National Health Commission of the People's Republic of China, upper headspace method

  • GBZ/T 309-2018 Determination of acetone in urine headspace-gas chromatography
  • GBZ/T 310-2018 Determination of 1-Bromopropane in Urine Headspace-Gas Chromatography
  • GB 23200.55-2016 National food safety standards— Determination of twenty one fumigant residues in foods Headspace gas chromatography

European Committee for Standardization (CEN), upper headspace method

  • EN 12561-5:2002 Railway applications - Tank wagons - Part 5: Top devices for bottom emptying and top filling of liquid products
  • EN 12561-5:2011 Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products
  • EN 16212:2012 Energy Efficiency and Savings Calculation - Top-down and Bottom-up Methods
  • EN ISO 19958:2004 Footwear - Test methods for heels and top pieces - Top piece retention strength
  • EN ISO 24264:2020 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020)
  • EN 12312-19:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
  • PD CEN/TS 1187:2012 Test methods for external fire exposure to roofs
  • EN 2544:1987 Representation of Rivets on Drawings for Aerospace Equipment
  • EN 3475-514:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
  • EN 2155-3:1993 Aerospace series; test methods for transparent materials for aircraft glazing; part 3: determination of refractive index
  • EN ISO 22155:2013 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method
  • EN ISO 24415-1:2009 Tips for assistive products for walking - Requirements and test methods - Part 1: Friction of tips
  • EN 12561-4:2002 Railway applications - Tank wagons - Part 4: Top devices for top emptying and filling of liquid products
  • EN 16857:2017 Foodstuffs - Determination of benzene in soft drinks@ other beverages and vegetable-based infant foods by headspace gas chromatography mass spectrometry (HS-GC-MS)
  • EN 2491:1997 Aerospace Series - Molybdenum Disulfide Dry Lubricants - Coating Methods
  • EN 16620:2015 Food analysis - Determination of furan in coffee and coffee products by headspace gas chromatography and mass spectrometry (HS GC-MS)
  • EN 15316-4-8:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8: Space heating generation systems@ air heating and overhead radiant heating systems@ including stoves (local)@ Module M3-8-8
  • EN 13071-2:2008+A1:2013 Stationary waste containers up to 5000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
  • EN 12326-2:2000 Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test Includes amendment A1:2004
  • EN 29885:1994 Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods (ISO 9885:1991)
  • EN 2591-509:2023 Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts

American Society of Mechanical Engineers (ASME), upper headspace method

  • ASME B30.2-2011 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)

American National Standards Institute (ANSI), upper headspace method

  • ANSI/ASME B30.2-2011 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)
  • ANSI/NFPA 276-2011 Standard Method of Fire Tests for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components
  • ANSI/ASTM F1521:2012 Test Methods for Performance of Range Tops

IT-UNI, upper headspace method

  • UNI EN ISO 24264:2021 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength

Professional Standard - Hygiene , upper headspace method

  • WS/T 62-1996 Urine.Determination of methanol.Headspace-gas chromatographic method

Standard Association of Australia (SAA), upper headspace method

PL-PKN, upper headspace method

  • PN-EN ISO 24264-2021-04 E Footwear -- Test methods for hollow and compact heels and top pieces -- Top piece attachment strength (ISO 24264:2020)

Group Standards of the People's Republic of China, upper headspace method

  • T/BSM 0001-2023 Determination of hydrogen content in hydrogen water Headspace gas chromatographic method
  • T/FSI 102-2023 Determination of Hydrogen Content in Hydrogen Silicone Oil by Headspace Gas Chromatography
  • T/CSTEA 00053-2022 Determination of Methyl Bromide Residue in Tea Headspace Gas Chromatography Method
  • T/FQIA 006-2022 Determination of Methyl bromide residues in tea - Headspace gas chromatography-mass spectrometry
  • T/JSGA 007-2023 Determination of cyanide in electroformed gold articles by headspace gas chromatography
  • T/SASJL 0010-2023 Top static load test method for autonomous buses
  • T/GAIA 004-2020 Determination of eleven odor compounds in water by headspace solid phase microextraction coupled with gas chromatography-mass spectrometry
  • T/CFA 020102024-2023 Ductile iron pipes for trenchless application— Part 1:used for pipe jacking method
  • T/SATA 030-2022 Determination of sulfur ether and pyrazine compounds in water by headspace solid phase microextraction-gas chromatography–mass Spectrometry
  • T/SDAQI 078-2023 Food packaging plastic materials and products—Determination of migration of 1-Hexene—Headspace gas chromatography method
  • T/CAB CSISA0004-2019 Test and Evaluation for Artificial Thermal Environment Comfort Part 2: Room Air Conditioners with Up and Down Outlets
  • T/NAIA 081-2021 Determination of Volatile Alcohol Components in Wine Headspace-Solid Phase Microextraction-Gas Chromatography-Mass Spectrometry
  • T/FSI 103-2023 Determination of vinyl content in vinyl silicone oil and methyl vinyl silicone rubber by headspace gas chromatography
  • T/GAIA 007.2-2021 Determination of the Foreign Impurity in Oils PartⅡ: Determination of the Volatile Foreign Impurity by HS-SPME/GC-MS

中华人民共和国国家卫生和计划生育委员会, upper headspace method

  • WS/T 96-1996 Urine.Determination of trichloroacetic acid.Headspace gas chromatographic method

Professional Standard - Petroleum, upper headspace method

  • SY/T 6009.3-2003 Test method of samples of geochemical exploration for oil and gas Part 3:Determination of light hydrocarbons in head space Gas chromatography
  • SY/T 6846-2012 Horizontal well completion technology with stage cementing
  • SY 6846-2012 Completion Method of Upper Cementing and Lower Screen Tube in Horizontal Wells

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, upper headspace method

  • GB/T 11381-1989 Method of static load test for bus top
  • GB/T 30735-2014 Test methods for external exposure of roofs and roof coverings to fire
  • GB/T 17130-1997 Water quality--Determination of volatile halogenated organic compounds--Headspace gas chromatography
  • GB/T 24572.2-2009 Standard practice for separation and concentration of ignitable liquid residues from fire debris samples.Part 2: Direct headspace vapors sampling
  • GB/T 21569-2008 Dangerous goods.Test method for top lift of large packaging
  • GB/T 41682-2022 Determination of headspace gas content in plastic packaging container for food—Sensor method
  • GB/T 39107-2020 Determination of volatile organic compounds content for consumer products—Static headspace sampling method
  • GB/T 21589-2008 Dangerous goods.Test method for top lift of intermediate bulk containers (IBCs)
  • GB/T 30932-2014 Determination of dioxane residue in cosmetics.Headspace gas chromatography-mass spectrometry
  • GB/T 21481.2-2008 Ships and marine technology.Potable water supply on ships and marine structures.Part 2: Method of calculation

AT-ON, upper headspace method

  • OENORM EN ISO 24264:2021 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020)
  • ONORM M 6236-1993 Water analysis - Determination of easily volatile halogenated hydrocarbons - Head space gas Chromatographie method

CH-SNV, upper headspace method

  • SN EN ISO 24264:2021 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020)

Lithuanian Standards Office , upper headspace method

  • LST EN ISO 24264:2020 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020)
  • LST EN 13628-1-2003 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods
  • LST EN 13628-2-2003 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods
  • LST EN ISO 13938-1:2002 Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999)
  • LST EN ISO 13938-2:2002 Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999)
  • LST EN 14479-2004 Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography-Absolute method
  • LST EN 12561-4-2011 Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products
  • LST EN 13071-1-2008 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
  • LST EN 13071-1-2008/AC-2010 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
  • LST EN 14067-2-2004 Railway applications - Aerodynamics - Part 2: Aerodynamics on open track
  • LST EN 13071-3-2011 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
  • LST EN 13071-2-2008/AC-2010 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
  • LST EN 13071-2-2008 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
  • LST ISO 10473:2001 Ambient air. Measurement of the mass of particulate matter on a filter medium. Beta-ray absorption method
  • LST EN 29885-2004 Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods (ISO 9885:1991)
  • LST EN 13750-2003 Domestic water kettles for use on top of stove, cooker or hob - Requirements and test methods
  • LST EN 3475-514-2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
  • LST EN 2591-509-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts

Professional Standard - Petrochemical Industry, upper headspace method

  • SH/T 0707-2001 Determination of benzene and toluene in petroleum waxes using headspace gas chromatography with flame ionization detection

Danish Standards Foundation, upper headspace method

  • DS/EN ISO 13938-1:2000 Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension
  • DS/EN ISO 13938-2:2000 Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension
  • DS/EN 13628-1:2003 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods
  • DS/CEN/TS 1187:2012 Test methods for external fire exposure to roofs
  • DS/EN 13628-2:2003 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods
  • DS/EN 12561-4:2011 Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products
  • DS/EN 14479:2004 Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method
  • DS/ISO 12468-1:2003 External exposure of roofs to fire - Part 1: Test method
  • DS/EN 13071-1/AC:2010 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
  • DS/EN 13071-1:2008 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
  • DS/EN ISO 24264:2020 Footwear – Test methods for hollow and compact heels and top pieces – Top piece attachment strength (ISO 24264:2020)
  • DS/EN 14067-2:2003 Railway applications - Aerodynamics - Part 2: Aerodynamics on open track
  • DS/EN 13071-3:2011 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
  • DS/ISO 9885:1994 Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods
  • DS/EN ISO 22155:2013 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method
  • DS/EN 29885:1994 Wide-mouth glass containers-Deviation from flatness of top sealing surface-Test methods
  • DS/EN 13071-2+A1:2013 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
  • DS/EN 13071-2/AC:2010 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
  • DS/ENV 1259-1:1994 Single burner gas-fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Part 1: Requirements and test methods for establishing the rational use of energy. Radiometric method A
  • DS/EN 13750:2003 Domestic water kettles for use on top of stove, cooker or hob - Requirements and test methods
  • DS/EN 3475-514:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
  • DS/EN 2591-509:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts

Indonesia Standards, upper headspace method

  • SNI ISO 13938-2:2011 Textiles-Bursting properties of fabrics-Part 2 : Pneumatic method for determination of bursting strength and bursting distension
  • SNI 09-4403-1997 Testing methods for air conditioner for four or more wheel motor vehicles

IPC - Association Connecting Electronics Industries, upper headspace method

ES-UNE, upper headspace method

  • UNE-EN ISO 13938-1:2020 Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:2019)
  • UNE-EN ISO 13938-2:2020 Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:2019)
  • UNE-EN ISO 24264:2021 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020)
  • UNE-EN 13071-1:2020 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
  • UNE-EN ISO 22155:2016 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method (ISO 22155:2016) (Endorsed by AENOR in May of 2016.)
  • UNE-EN 13071-3:2020 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
  • UNE-CLC/TR 50670:2016 External fire exposure to roofs in combination with photovoltaic (PV) arrays - Test method(s) (Endorsed by Asociación Española de Normalización in February of 2017.)
  • UNE-EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
  • UNE-EN ISO 3303-2:2021 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method (ISO 3303-2:2020)
  • UNE-EN ISO 3303-1:2021 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method (ISO 3303-1:2020)
  • UNE-EN 2591-509:2001 Aerospace series. Elements of electrical and optical connection. Test methods. Part 509: Adhesion of coating on contacts (Endorsed by AENOR in February of 2002.)

Professional Standard - Civil Aviation, upper headspace method

  • MH/T 3011.4-2006 Maintenance for civil aircraft Ground safety Part 4: Jacking for civil aircraft
  • MH 3145.34-1996 Maintenance standards for civil aircraft.Unit 2:Ground safety.Part 34:Civil aircraft jacking
  • MH/T 3011.20-2006 Maintenance for civil aircraft Ground safety Part 20: Explosive searching on civil aircraft

Professional Standard - Light Industry, upper headspace method

  • QB/T 4708-2014 Determination of volatile alcohol components in Chinese rice wine.Static headspace-gas chromatography
  • QB/T 4709-2014 Determination of volatile ester components in Chinese rice wine.Static headspace-gas chromatography
  • QB/T 4850-2015 Determination of volatile ester components in wine.Static headspace-gas chromatography

Guangdong Provincial Standard of the People's Republic of China, upper headspace method

  • DB44/T 1027-2012 Determination of Carbonate Content in Alkali Pulping Black Liquor by Headspace Gas Chromatography
  • DB44/T 1031-2012 Determination of Methanol Content in Pulping Waste Liquid by Headspace Gas Chromatography
  • DB44/T 1030-2012 Determination of Carboxylic Acid Group Content in Pulp by Headspace Gas Chromatography
  • DB44/T 1157-2013 Determination of Oxalate Content in Pulp Bleaching Wastewater by Headspace-Gas Chromatography
  • DB44/T 1158-2013 Determination of Residual Hydrogen Peroxide Content in Pulp Bleaching Wastewater by Headspace-Gas Chromatography

Shandong Provincial Standard of the People's Republic of China, upper headspace method

  • DB37/T 4147-2020 Water quality—Determination of trihalomethane formation potential—Headspace-gas chromatography
  • DB37/T 4160-2020 Water quality—Determination of thioether—Headspace-gas chromatography-Mass spectrometry
  • DB37/T 3993-2020 Determination of benzene residues in edible oil—Headspace-GC/MS method

Professional Standard - Ocean, upper headspace method

  • HY/T 262-2018 Determination of dissolved methane in seawater—Headspace equilibrium gas chromatography method
  • HY/T 263-2018 Determination of dissolved nitrous oxide in seawater—Headspace equilibrium gas chromatography method

AENOR, upper headspace method

  • UNE-EN 13628-1:2003 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods.
  • UNE-CEN/TS 1187:2013 Test methods for external fire exposure to roofs
  • UNE-EN 13628-2:2003 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods.
  • UNE-EN 14479:2004 Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography-Absolute method
  • UNE-EN 12561-4:2012 Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products
  • UNE-EN 13071-1:2008 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
  • UNE-EN 13071-3:2012 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
  • UNE-EN 13071-2:2008+A1:2013 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
  • UNE-ISO 10473:2005 Ambient air -- Measurement of the mass of particulate matter on a filter medium -- Beta-ray absorption method
  • UNE-EN 13750:2003 Domestic water kettles for use on top of stove, cooker or hob - Requirements and test methods.

Professional Standard - Electricity, upper headspace method

  • DL/T 1824-2018 Method for the determination of acetone content in operating transformer oil by headspace gas chromatography

工业和信息化部, upper headspace method

  • QB/T 4849-2015 Determination of volatile alcohols in wine by static headspace-gas chromatography
  • SJ/T 11634-2016 Determination of methanol in developing solutions for the electronics industry by headspace gas chromatography
  • YD/T 3320.3-2020 Temperature control equipment for communications high heat density computer rooms Part 3: Top-mounted air conditioners
  • SH/T 1831-2020 Determination of free acrylonitrile content in acrylonitrile-butadiene rubber by headspace gas chromatography

BE-NBN, upper headspace method

Shaanxi Provincial Standard of the People's Republic of China, upper headspace method

  • DB61/T 971-2015 Determination of Methanol in Water by Static Headspace/Direct Injection Gas Chromatography

Shanxi Provincial Standard of the People's Republic of China, upper headspace method

  • DB14/T 1948-2019 Determination of Halogenated Hydrocarbons in Water Quality Headspace/Solid Phase Microextraction-Gas Chromatography
  • DB14/T 1949-2019 Determination of Soil Halogenated Hydrocarbons Headspace/Solid Phase Microextraction-Gas Chromatography

Hunan Provincial Standard of the People's Republic of China, upper headspace method

  • DB43/T 1652-2019 Determination of Calcium Carbonate Content in Tissue Paper by Headspace Gas Chromatography

RU-GOST R, upper headspace method

  • GOST R 52857.3-2007 Vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openings in shells and heads under internal and external pressure. Strength calculation of shells and heads under external static loads on the nozzle
  • GOST ISO 9885-2013 Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods
  • GOST 19125-1990 Fittings of connections for airborne instruments. Design and dimensions
  • GOST ISO 13938-1-2021 Materials and products textile. Bursting properties of fabrics. Part 1. Hydraulic method for determination of bursting strength and bursting distension
  • GOST R 52857.9-2007 Vessels and apparatus. Norms and methods of strength calculation. Determination of stresses at nozzle-to-shell and head junctions under action of pressure and external loads on the nozzle

Professional Standard - Commodity Inspection, upper headspace method

  • SN/T 3616-2013 Determination of volatile organic compounds in wood materials.Headspace-GC-MS method
  • SN/T 2238-2008 Determination of twenty one fumigant residues in food for impport and export.Headspace GC method
  • SN/T 2268-2009 Determination of organic volatiles in enameled wire.Headspace.GC-MS method
  • SN/T 4148-2015 Determinaiton of volatile organic compounds(VOCs) in packing materials- Static headspace gas chromatography
  • SN/T 3626-2013 Determination of hexanal in edible oil for export.Headspace-SPME-GC method
  • SN/T 2251-2009 Determination of benzene,toluene,xylene and touene diisocyanates in solvent coatings.headspace-GC-MS method
  • SN/T 3046-2011 Food contact materials for export. Polymers. Determination of 1,1-d ichloroethylene. Headspace gas chromatography
  • SN/T 4182-2015 Determination of propylene oxide and epichlorohydrin monomers in imported epoxy coating.Headspace-gas chromatography

Anhui Provincial Standard of the People's Republic of China, upper headspace method

  • DB34/T 2086-2014 Determination method of N-methylpyrrolidone content in lubricating oil by headspace gas chromatography

VN-TCVN, upper headspace method

  • TCVN 7873-2008 water.Determination of benzene content.Purge and trap capillary-column gas chromatographic/mass spectrometry method
  • TCVN 6152-1996 Ambient air.Determination of the particulate lead content of aerosols collected on filters.Atomic absorption spectrometric method

Professional Standard - Tobacco, upper headspace method

  • YC/T 267-2008 Determination of vinyl acetate in polyvinyl acetate emulsion adhesive for cigarette.Headspace-gas chromatography
  • YC/T 207-2014 Determination of solvent residuals on papers for cigarette.Headspace-gas chromatography/mass spectrometry
  • YC/T 207-2006 Determination of volatile organic compounds in cigarette carton and packet packaging papers. Headspace-gas chromatography

Professional Standard - Energy, upper headspace method

  • NB/SH/T 0707-2016 Determination of Benzene and Toluene in Paraffin Waxes by Headspace Injection Gas Chromatography

Professional Standard - Agriculture, upper headspace method

  • SN/T 5578-2023 Determination of Methylcyclosiloxanes in Leather by Headspace-Gas Chromatography-Mass Spectrometry
  • SN/T 5503-2023 Determination of vinyl acetate in imported and exported cosmetics by headspace gas chromatography-mass spectrometry
  • SN/T 5077-2018 Determination of nine organic solvent residues in plant extracts by headspace-gas chromatography
  • SN/T 5073-2018 Determination of residual solvents such as toluene and methanol in food additives for export by headspace gas chromatography
  • HJ 1289-2023 Determination of 15 Ketones and 6 Ethers in Soil and Sediment Headspace/Gas Chromatography-Mass Spectrometry

国家能源局, upper headspace method

  • SH/T 0707-2016 Determination of benzene and toluene content in paraffin wax by headspace sampling gas chromatography

National Fire Protection Association (NFPA), upper headspace method

  • NFPA 276-2015 Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components (Effective Date: 12/01/2014)
  • NFPA 276-2011 Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components Effective Date: 07/22/2010

未注明发布机构, upper headspace method

  • BS 5803-4:1985(1999) Thermal insulation for use in pitched roof spaces in dwellings — Part 4 : Methods for determining flammability and resistance to smouldering
  • BS EN 20140-9:1994(1999) Acoustics — Measurement of sound insulation in buildings and of building elements — Part 9 : Laboratory measurement of room - to - room airborne sound insulation of a suspended ceiling with a plenum above it
  • BS 5803-3:1985(1999) Thermal insulation for use in pitched roof spaces in dwellings — Part 3 : Specification for cellulose fibre thermal insulation for application by blowing
  • BS EN 50341-2:2001(2007) Overhead electrical lines exceeding AC 45 kV — Part 2 : Index ofNational Normative Aspects

Professional Standard - Nuclear Industry, upper headspace method

  • EJ/T 1008-1996 <(superscript)14>C-based methods for sampling and determination in air

Professional Standard - Water Conservancy, upper headspace method

  • SL 496-2010 Determination of volatile aromatics in water by headspace-gas chromatography(HS-GC)

国家质量监督检验检疫总局, upper headspace method

  • SN/T 4949-2017 Determination of dioxane content in detergent products by headspace gas chromatography-mass spectrometry
  • SN/T 4576-2016 Determination of methyl methacrylate in export cosmetics by headspace gas chromatography
  • SN/T 4675.18-2016 Determination of dithiocarbamate residues in exported wines by headspace gas chromatography
  • SN/T 4358-2015 Determination of 1,1-dichloroethane and 1,2-dichloroethane in imported and exported textiles by headspace gas chromatography
  • SN/T 4423-2016 Determination of vinyl chloride monomer in textile polyvinyl chloride coating materials by headspace gas chromatography-mass spectrometry

GM Global, upper headspace method

  • GMW 8081-2011 Static Headspace GC-MS for Interior Materials Interior Emissions Issue 2; English

CEN - European Committee for Standardization, upper headspace method

  • PREN 13071-1-2018 Stationary waste containers up to 5 000 l@ top lifted and bottom emptied - Part 1: General requirements
  • EN 13071-1:2008 Stationary waste containers up to 5 000 l@ top lifted and bottom emptied - Part 1: General requirements
  • EN 12561-4:2011 Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products
  • PREN 13071-3-2018 Stationary waste containers up to 5 000 l@ top lifted and bottom emptied - Part 3: Recommended lifting connections
  • EN 13071-2:2008 Stationary waste containers up to 5 000 l@ top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
  • PREN 13071-2-2018 Stationary waste containers up to 5 000 l@ top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems

IN-BIS, upper headspace method

GOSTR, upper headspace method

  • GOST R 58219-2018 Petroleum and natural gas industries. Arctic operations. Technical devices for fire protection of topsides of offshore platforms. General requirements
  • GOST R 57915-2017 Plastics. Polymer dispersions and rubber latices. Determination of residual monomers and other organic components by capillary-column gas chromatography. Part 2. Headspace method
  • GOST 34390-2018 Agricultural machinery. Machines for harvesting root crops tops. Test methods

Professional Standard - Railway, upper headspace method

  • TB/T 3030-2002 Test method of F8 type air distribution valve and electropneumatic valve on F8 valve test bench

Defense Logistics Agency, upper headspace method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, upper headspace method

  • GJB 3196.45A-2005 Test methods of cartridge.Part 45:Safety test of explosive bullet.Push out cartridge
  • GJB 380.2A-2004 Contamination test method of operating fluid for aviation Part 2:Extraction of fluid samples from lines of an operating system

ES-AENOR, upper headspace method

Military Standard of the People's Republic of China-General Armament Department, upper headspace method

  • GJB 380.2A-2015 Aviation Service Fluid Contamination Testing Part 2: Methods for Collecting Fluid Samples from System Pipelines

Aerospace, Security and Defence Industries Association of Europe (ASD), upper headspace method

  • ASD-STAN PREN 2544-1983 Representation of Rivets on Drawings for Aerospace Equipment Aerospace Series (Edition 1)
  • ASD-STAN PREN 3475-701-1992 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 701 - Strippability and Adherence of Insulation to the Conductor (Issue P 1)

海关总署, upper headspace method

  • HS/T 40-2013 Determination of toluene, acetone and butanone in paints by headspace gas chromatography-mass spectrometry

ZA-SANS, upper headspace method

  • SANS 8144-1:2006 Thermal insulation - Mineral wool mats for ventilated roof spaces Part 1: Specification for applications with restricted ventilation

Professional Standard - Aerospace, upper headspace method

  • QJ 10014.1-2008 Safety and Compatibility of Space Materials Part 1: Determination of upward burning performance of materials

(U.S.) Ford Automotive Standards, upper headspace method

  • FORD FLTM BZ 157-01-2011 DETERMINATION OF ORGANIC EMISSIONS FROM NON-METALLIC MATERIALS IN VEHICLE INTERIORS BY HEADSPACE GAS CHROMATOGRAPHY

Liaoning Provincial Standard of the People's Republic of China, upper headspace method

  • DB21/T 2554-2016 Determination of Benzene Series in Marine Sediments by Headspace-Solid Phase Microextraction/Gas Chromatography-Mass Spectrometry

National Aeronautics and Space Administration (NASA), upper headspace method

VE-FONDONORMA, upper headspace method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, upper headspace method

  • GB/T 35953-2018 Determination of restricted dichloromethane and 1,1,1-trichloroethane in cosmetics—Headspace gas chromatography
  • GB/T 34430.2-2017 Ships and marine technology—Protective coatings and inspection method—Part 2: Void spaces of bulk carriers and oil tankers

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, upper headspace method

  • PREN 2061-1976 Top Hat Section - Aluminium Alloy Folded Profiles with Lipped Flanges Dimensions Aerospace Series (Edition 1)
  • PREN 2061-1995 Aerospace Series Folded Profiles Top Hat-Section with Lipped Flanges in Aluminium and Aluminium Alloys Dimensions (Edition 2)

NO-SN, upper headspace method

  • NS 1547-1986 Steel tanks for atmospheric storage of flammable liquids - Vertical, cylindrical above ground tanks with plane bottom and conical top 3 to 50 cubic metres

KR-KS, upper headspace method

  • KS R ISO 13216-2-2008(2023) Road vehicles-Anchorages in vehicles and attachments to anchorages for child restraint systems-Part 2:Top tether anchorages and attachments
  • KS I ISO 22155-2016 Soil quality-Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers-Static headspace method
  • KS I ISO 10473-2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method

North Atlantic Treaty Organization Standards Agency, upper headspace method

  • STANAG 3548-1978 TIE-DOWN FITTINGS ON AIR TRANSPORTED AND AIR-DROPPED EQUIPMENT AND CARGO CARRIED INTERNALLY BY FIXED WING AIRCRAFT

Inner Mongolia Provincial Standard of the People's Republic of China, upper headspace method

  • DB15/T 2687-2022 Determination of volatile components in natural green hay by headspace solid-phase microextraction-gas chromatography mass spectrometry

European Committee for Electrotechnical Standardization(CENELEC), upper headspace method

  • CLC/TR 50670-2016 External fire exposure to roofs in combination with photovoltaic (PV) arrays - Test method(s)

Professional Standard - Post and Telecommunication, upper headspace method

ESDU - Engineering Sciences Data Unit, upper headspace method

  • ESDU 81028 D-1993 Lattice structures. Part 2: mean fluid forces on tower-like space frames.

国家市场监督管理总局、中国国家标准化管理委员会, upper headspace method

  • GB/T 25217.13-2019 Methods for test, monitoring and prevention of rock burst—Part13: Prevention method of deep-hole blasting in roof
  • GB/T 25217.14-2020 Methods for test, monitoring and prevention of rock burst—Part 14: Prevention method of roof hydraulic fracturing

International Telecommunication Union (ITU), upper headspace method

ETSI - European Telecommunications Standards Institute, upper headspace method

  • ETSI EN 301 841-2:2019 VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 2: Upper layers (V1.2.0)

SG-SPRING SG, upper headspace method

  • SS 323 Pt.D5-1987 Methods Of Test For Flexible Plastic Packaging Materials Part D5 : Determination Of Residual Vinyl Chloride Monomer Content In PPB Range In Vinyl Chloride Homo- And Co-polymers By Head-space Gas Chromatography




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved